uboot-vybrid_public/lib_i386/pcat_interrupts.c

/*
 * (C) Copyright 2009
 * Graeme Russ, graeme.russ@gmail.com
 *
 * (C) Copyright 2002
 * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * This file provides the interrupt handling functionality for systems
 * based on the standard PC/AT architecture using two cascaded i8259
 * Programmable Interrupt Controllers.
 */

#include <common.h>
#include <asm/io.h>
#include <asm/i8259.h>
#include <asm/ibmpc.h>
#include <asm/interrupt.h>

#if CONFIG_SYS_NUM_IRQS != 16
#error "CONFIG_SYS_NUM_IRQS must equal 16 if CONFIG_SYS_NUM_IRQS is defined"
#endif

DECLARE_INTERRUPT(0);
DECLARE_INTERRUPT(1);
DECLARE_INTERRUPT(3);
DECLARE_INTERRUPT(4);
DECLARE_INTERRUPT(5);
DECLARE_INTERRUPT(6);
DECLARE_INTERRUPT(7);
DECLARE_INTERRUPT(8);
DECLARE_INTERRUPT(9);
DECLARE_INTERRUPT(10);
DECLARE_INTERRUPT(11);
DECLARE_INTERRUPT(12);
DECLARE_INTERRUPT(13);
DECLARE_INTERRUPT(14);
DECLARE_INTERRUPT(15);

int interrupt_init(void)
{
	u8 i;

	disable_interrupts();

	/* Setup interrupts */
	set_vector(0x20, irq_0);
	set_vector(0x21, irq_1);
	set_vector(0x23, irq_3);
	set_vector(0x24, irq_4);
	set_vector(0x25, irq_5);
	set_vector(0x26, irq_6);
	set_vector(0x27, irq_7);
	set_vector(0x28, irq_8);
	set_vector(0x29, irq_9);
	set_vector(0x2a, irq_10);
	set_vector(0x2b, irq_11);
	set_vector(0x2c, irq_12);
	set_vector(0x2d, irq_13);
	set_vector(0x2e, irq_14);
	set_vector(0x2f, irq_15);

	/* Mask all interrupts */
	outb(0xff, MASTER_PIC + IMR);
	outb(0xff, SLAVE_PIC + IMR);

	/* Master PIC */
	/* Place master PIC interrupts at INT20 */
	/* ICW3, One slave PIC is present */
	outb(ICW1_SEL|ICW1_EICW4, MASTER_PIC + ICW1);
	outb(0x20, MASTER_PIC + ICW2);
	outb(IR2, MASTER_PIC + ICW3);
	outb(ICW4_PM, MASTER_PIC + ICW4);

	for (i = 0; i < 8; i++)
		outb(OCW2_SEOI | i, MASTER_PIC + OCW2);

	/* Slave PIC */
	/* Place slave PIC interrupts at INT28 */
	/* Slave ID */
	outb(ICW1_SEL|ICW1_EICW4, SLAVE_PIC + ICW1);
	outb(0x28, SLAVE_PIC + ICW2);
	outb(0x02, SLAVE_PIC + ICW3);
	outb(ICW4_PM, SLAVE_PIC + ICW4);

	for (i = 0; i < 8; i++)
		outb(OCW2_SEOI | i, SLAVE_PIC + OCW2);

	/*
	 * Enable cascaded interrupts by unmasking the cascade IRQ pin of
	 * the master PIC
	 */
	unmask_irq (2);

	enable_interrupts();

	return 0;
}

void mask_irq(int irq)
{
	int imr_port;

	if (irq >= CONFIG_SYS_NUM_IRQS)
		return;

	if (irq > 7)
		imr_port = SLAVE_PIC + IMR;
	else
		imr_port = MASTER_PIC + IMR;

	outb(inb(imr_port) | (1 << (irq & 7)), imr_port);
}

void unmask_irq(int irq)
{
	int imr_port;

	if (irq >= CONFIG_SYS_NUM_IRQS)
		return;

	if (irq > 7)
		imr_port = SLAVE_PIC + IMR;
	else
		imr_port = MASTER_PIC + IMR;

	outb(inb(imr_port) & ~(1 << (irq & 7)), imr_port);
}

void specific_eoi(int irq)
{
	if (irq >= CONFIG_SYS_NUM_IRQS)
		return;

	if (irq > 7) {
		/*
		 *  IRQ is on the slave - Issue a corresponding EOI to the
		 *  slave PIC and an EOI for IRQ2 (the cascade interrupt)
		 *  on the master PIC
		 */
		outb(OCW2_SEOI | (irq & 7), SLAVE_PIC + OCW2);
		irq = SEOI_IR2;
	}

	outb(OCW2_SEOI | irq, MASTER_PIC + OCW2);
}