init.S 2.7 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889
  1. /*
  2. * (C) Copyright 2009-2010
  3. * Stefan Roese, DENX Software Engineering, sr@denx.de.
  4. *
  5. * See file CREDITS for list of people who contributed to this
  6. * project.
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License as
  10. * published by the Free Software Foundation; either version 2 of
  11. * the License, or (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21. * MA 02111-1307 USA
  22. */
  23. #include <ppc_asm.tmpl>
  24. #include <config.h>
  25. #include <asm/mmu.h>
  26. #include <asm/ppc4xx.h>
  27. /*
  28. * TLB TABLE
  29. *
  30. * This table is used by the cpu boot code to setup the initial tlb
  31. * entries. Rather than make broad assumptions in the cpu source tree,
  32. * this table lets each board set things up however they like.
  33. *
  34. * Pointer to the table is returned in r1
  35. *
  36. */
  37. .section .bootpg,"ax"
  38. .globl tlbtab
  39. tlbtab:
  40. tlbtab_start
  41. /*
  42. * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to
  43. * use the speed up boot process. It is patched after relocation to
  44. * enable SA_I.
  45. */
  46. tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR,
  47. 4, AC_RWX | SA_G) /* TLB 0 */
  48. /*
  49. * TLB entries for SDRAM are not needed on this platform.
  50. * They are dynamically generated in the SPD DDR(2) detection
  51. * routine.
  52. */
  53. tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4,
  54. AC_RWX | SA_I)
  55. tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4,
  56. AC_RW | SA_IG)
  57. tlbentry(CONFIG_SYS_ACE_BASE, SZ_1K,
  58. CONFIG_SYS_ACE_BASE_PHYS_L, CONFIG_SYS_ACE_BASE_PHYS_H,
  59. AC_RW | SA_IG)
  60. tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC,
  61. AC_RW | SA_IG)
  62. tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC,
  63. AC_RW | SA_IG)
  64. tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD,
  65. AC_RW | SA_IG)
  66. tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD,
  67. AC_RW | SA_IG)
  68. tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD,
  69. AC_RW | SA_IG)
  70. tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD,
  71. AC_RW | SA_IG)
  72. tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD,
  73. AC_RW | SA_IG)
  74. tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD,
  75. AC_RW | SA_IG)
  76. tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD,
  77. AC_RW | SA_IG)
  78. tlbtab_end