bootm.c 5.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184
  1. /* SPARC code for booting linux 2.6
  2. *
  3. * (C) Copyright 2007
  4. * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
  5. *
  6. * See file CREDITS for list of people who contributed to this
  7. * project.
  8. *
  9. * This program is free software; you can redistribute it and/or
  10. * modify it under the terms of the GNU General Public License as
  11. * published by the Free Software Foundation; either version 2 of
  12. * the License, or (at your option) any later version.
  13. *
  14. * This program is distributed in the hope that it will be useful,
  15. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  17. * GNU General Public License for more details.
  18. *
  19. * You should have received a copy of the GNU General Public License
  20. * along with this program; if not, write to the Free Software
  21. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22. * MA 02111-1307 USA
  23. */
  24. #include <common.h>
  25. #include <command.h>
  26. #include <asm/byteorder.h>
  27. #include <asm/prom.h>
  28. #include <asm/cache.h>
  29. #include <image.h>
  30. #define PRINT_KERNEL_HEADER
  31. extern image_header_t header;
  32. extern void srmmu_init_cpu(unsigned int entry);
  33. extern void prepare_bootargs(char *bootargs);
  34. #ifdef CONFIG_USB_UHCI
  35. extern int usb_lowlevel_stop(int index);
  36. #endif
  37. /* sparc kernel argument (the ROM vector) */
  38. struct linux_romvec *kernel_arg_promvec;
  39. /* page szie is 4k */
  40. #define PAGE_SIZE 0x1000
  41. #define RAMDISK_IMAGE_START_MASK 0x07FF
  42. #define RAMDISK_PROMPT_FLAG 0x8000
  43. #define RAMDISK_LOAD_FLAG 0x4000
  44. struct __attribute__ ((packed)) {
  45. char traptable[PAGE_SIZE];
  46. char swapper_pg_dir[PAGE_SIZE];
  47. char pg0[PAGE_SIZE];
  48. char pg1[PAGE_SIZE];
  49. char pg2[PAGE_SIZE];
  50. char pg3[PAGE_SIZE];
  51. char empty_bad_page[PAGE_SIZE];
  52. char empty_bad_page_table[PAGE_SIZE];
  53. char empty_zero_page[PAGE_SIZE];
  54. unsigned char hdr[4]; /* ascii "HdrS" */
  55. /* 00.02.06.0b is for Linux kernel 2.6.11 */
  56. unsigned char linuxver_mega_major;
  57. unsigned char linuxver_major;
  58. unsigned char linuxver_minor;
  59. unsigned char linuxver_revision;
  60. /* header version 0x0203 */
  61. unsigned short hdr_ver;
  62. union __attribute__ ((packed)) {
  63. struct __attribute__ ((packed)) {
  64. unsigned short root_flags;
  65. unsigned short root_dev;
  66. unsigned short ram_flags;
  67. unsigned int sparc_ramdisk_image;
  68. unsigned int sparc_ramdisk_size;
  69. unsigned int reboot_command;
  70. unsigned int resv[3];
  71. unsigned int end;
  72. } ver_0203;
  73. } hdr_input;
  74. } *linux_hdr;
  75. /* temporary initrd image holder */
  76. image_header_t ihdr;
  77. void arch_lmb_reserve(struct lmb *lmb)
  78. {
  79. /* Reserve the space used by PROM and stack. This is done
  80. * to avoid that the RAM image is copied over stack or
  81. * PROM.
  82. */
  83. lmb_reserve(lmb, CONFIG_SYS_RELOC_MONITOR_BASE, CONFIG_SYS_RAM_END);
  84. }
  85. /* boot the linux kernel */
  86. int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t * images)
  87. {
  88. char *bootargs;
  89. ulong rd_len;
  90. void (*kernel) (struct linux_romvec *, void *);
  91. int ret;
  92. if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
  93. return 1;
  94. /* Get virtual address of kernel start */
  95. linux_hdr = (void *)images->os.load;
  96. /* */
  97. kernel = (void (*)(struct linux_romvec *, void *))images->ep;
  98. /* check for a SPARC kernel */
  99. if ((linux_hdr->hdr[0] != 'H') ||
  100. (linux_hdr->hdr[1] != 'd') ||
  101. (linux_hdr->hdr[2] != 'r') || (linux_hdr->hdr[3] != 'S')) {
  102. puts("Error reading header of SPARC Linux kernel, aborting\n");
  103. goto error;
  104. }
  105. #ifdef PRINT_KERNEL_HEADER
  106. printf("## Found SPARC Linux kernel %d.%d.%d ...\n",
  107. linux_hdr->linuxver_major,
  108. linux_hdr->linuxver_minor, linux_hdr->linuxver_revision);
  109. #endif
  110. #ifdef CONFIG_USB_UHCI
  111. usb_lowlevel_stop();
  112. #endif
  113. /* set basic boot params in kernel header now that it has been
  114. * extracted and is writeable.
  115. */
  116. ret = image_setup_linux(images);
  117. if (ret) {
  118. puts("### Failed to relocate RAM disk\n");
  119. goto error;
  120. }
  121. /* Calc length of RAM disk, if zero no ramdisk available */
  122. rd_len = images->rd_end - images->rd_start;
  123. if (rd_len) {
  124. /* Update SPARC kernel header so that Linux knows
  125. * what is going on and where to find RAM disk.
  126. *
  127. * Set INITRD Image address relative to RAM Start
  128. */
  129. linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image =
  130. images->initrd_start - CONFIG_SYS_RAM_BASE;
  131. linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = rd_len;
  132. /* Clear READ ONLY flag if set to non-zero */
  133. linux_hdr->hdr_input.ver_0203.root_flags = 1;
  134. /* Set root device to: Root_RAM0 */
  135. linux_hdr->hdr_input.ver_0203.root_dev = 0x100;
  136. linux_hdr->hdr_input.ver_0203.ram_flags = 0;
  137. } else {
  138. /* NOT using RAMDISK image, overwriting kernel defaults */
  139. linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image = 0;
  140. linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = 0;
  141. /* Leave to kernel defaults
  142. linux_hdr->hdr_input.ver_0203.root_flags = 1;
  143. linux_hdr->hdr_input.ver_0203.root_dev = 0;
  144. linux_hdr->hdr_input.ver_0203.ram_flags = 0;
  145. */
  146. }
  147. /* Copy bootargs from bootargs variable to kernel readable area */
  148. bootargs = getenv("bootargs");
  149. prepare_bootargs(bootargs);
  150. /* turn on mmu & setup context table & page table for process 0 (kernel) */
  151. srmmu_init_cpu((unsigned int)kernel);
  152. /* Enter SPARC Linux kernel
  153. * From now on the only code in u-boot that will be
  154. * executed is the PROM code.
  155. */
  156. kernel(kernel_arg_promvec, (void *)images->ep);
  157. /* It will never come to this... */
  158. while (1) ;
  159. error:
  160. return 1;
  161. }