pcat_timer.c 2.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102
  1. /*
  2. * (C) Copyright 2002
  3. * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
  4. *
  5. * See file CREDITS for list of people who contributed to this
  6. * project.
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License as
  10. * published by the Free Software Foundation; either version 2 of
  11. * the License, or (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21. * MA 02111-1307 USA
  22. */
  23. #include <common.h>
  24. #include <asm/io.h>
  25. #include <asm/i8254.h>
  26. #include <asm/ibmpc.h>
  27. #define TIMER0_VALUE 0x04aa /* 1kHz 1.9318MHz / 1000 */
  28. #define TIMER2_VALUE 0x0a8e /* 440Hz */
  29. int timer_init(void)
  30. {
  31. /* initialize timer 0 and 2
  32. *
  33. * Timer 0 is used to increment system_tick 1000 times/sec
  34. * Timer 1 was used for DRAM refresh in early PC's
  35. * Timer 2 is used to drive the speaker
  36. * (to stasrt a beep: write 3 to port 0x61,
  37. * to stop it again: write 0)
  38. */
  39. outb (PIT_CMD_CTR0 | PIT_CMD_BOTH | PIT_CMD_MODE2,
  40. PIT_BASE + PIT_COMMAND);
  41. outb (TIMER0_VALUE & 0xff, PIT_BASE + PIT_T0);
  42. outb (TIMER0_VALUE >> 8, PIT_BASE + PIT_T0);
  43. outb (PIT_CMD_CTR2 | PIT_CMD_BOTH | PIT_CMD_MODE3,
  44. PIT_BASE + PIT_COMMAND);
  45. outb (TIMER2_VALUE & 0xff, PIT_BASE + PIT_T2);
  46. outb (TIMER2_VALUE >> 8, PIT_BASE + PIT_T2);
  47. irq_install_handler (0, timer_isr, NULL);
  48. unmask_irq (0);
  49. return 0;
  50. }
  51. static u16 read_pit(void)
  52. {
  53. u8 low;
  54. outb (PIT_CMD_LATCH, PIT_BASE + PIT_COMMAND);
  55. low = inb (PIT_BASE + PIT_T0);
  56. return ((inb (PIT_BASE + PIT_T0) << 8) | low);
  57. }
  58. /* this is not very exact */
  59. void udelay (unsigned long usec)
  60. {
  61. int counter;
  62. int wraps;
  63. if (timer_init_done)
  64. {
  65. counter = read_pit ();
  66. wraps = usec / 1000;
  67. usec = usec % 1000;
  68. usec *= 1194;
  69. usec /= 1000;
  70. usec += counter;
  71. while (usec > 1194) {
  72. usec -= 1194;
  73. wraps++;
  74. }
  75. while (1) {
  76. int new_count = read_pit ();
  77. if (((new_count < usec) && !wraps) || wraps < 0)
  78. break;
  79. if (new_count > counter)
  80. wraps--;
  81. counter = new_count;
  82. }
  83. }
  84. }