123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687 |
- /*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
- #include <common.h>
- #include <netdev.h>
- #include <asm/io.h>
- #include <nand.h>
- #include <asm/arch/nand_defs.h>
- DECLARE_GLOBAL_DATA_PTR;
- #define REV_DM6467EVM 0
- #define REV_DM6467TEVM 1
- /*
- * get_board_rev() - setup to pass kernel board revision information
- * Returns:
- * bit[0-3] System clock frequency
- * 0000b - 27 MHz
- * 0001b - 33 MHz
- */
- u32 get_board_rev(void)
- {
- #ifdef CONFIG_DAVINCI_DM6467TEVM
- return REV_DM6467TEVM;
- #else
- return REV_DM6467EVM;
- #endif
- }
- int board_init(void)
- {
- gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM;
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
- lpsc_on(DAVINCI_DM646X_LPSC_TIMER0);
- lpsc_on(DAVINCI_DM646X_LPSC_UART0);
- lpsc_on(DAVINCI_DM646X_LPSC_I2C);
- lpsc_on(DAVINCI_DM646X_LPSC_EMAC);
- /* Enable GIO3.3V cells used for EMAC */
- REG(VDD3P3V_PWDN) = 0x80000c0;
- /* Select UART function on UART0 */
- REG(PINMUX0) &= ~(0x0000003f << 18);
- REG(PINMUX1) &= ~(0x00000003);
- return 0;
- }
- #if defined(CONFIG_DRIVER_TI_EMAC)
- int board_eth_init(bd_t *bis)
- {
- if (!davinci_emac_initialize()) {
- printf("Error: Ethernet init failed!\n");
- return -1;
- }
- return 0;
- }
- #endif /* CONFIG_DRIVER_TI_EMAC */
- #ifdef CONFIG_NAND_DAVINCI
- int board_nand_init(struct nand_chip *nand)
- {
- davinci_nand_init(nand);
- return 0;
- }
- #endif
|