common.h 26 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921
  1. /*
  2. * (C) Copyright 2000-2009
  3. * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  4. *
  5. * See file CREDITS for list of people who contributed to this
  6. * project.
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License as
  10. * published by the Free Software Foundation; either version 2 of
  11. * the License, or (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21. * MA 02111-1307 USA
  22. */
  23. #ifndef __COMMON_H_
  24. #define __COMMON_H_ 1
  25. #undef _LINUX_CONFIG_H
  26. #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
  27. #ifndef __ASSEMBLY__ /* put C only stuff in this section */
  28. typedef unsigned char uchar;
  29. typedef volatile unsigned long vu_long;
  30. typedef volatile unsigned short vu_short;
  31. typedef volatile unsigned char vu_char;
  32. #include <config.h>
  33. #include <asm-offsets.h>
  34. #include <linux/bitops.h>
  35. #include <linux/types.h>
  36. #include <linux/string.h>
  37. #include <asm/ptrace.h>
  38. #include <stdarg.h>
  39. #if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000))
  40. #include <pci.h>
  41. #endif
  42. #if defined(CONFIG_8xx)
  43. #include <asm/8xx_immap.h>
  44. #if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \
  45. defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
  46. defined(CONFIG_MPC859DSL) || \
  47. defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \
  48. defined(CONFIG_MPC866P)
  49. # define CONFIG_MPC866_FAMILY 1
  50. #elif defined(CONFIG_MPC870) \
  51. || defined(CONFIG_MPC875) \
  52. || defined(CONFIG_MPC880) \
  53. || defined(CONFIG_MPC885)
  54. # define CONFIG_MPC885_FAMILY 1
  55. #endif
  56. #if defined(CONFIG_MPC860) \
  57. || defined(CONFIG_MPC860T) \
  58. || defined(CONFIG_MPC866_FAMILY) \
  59. || defined(CONFIG_MPC885_FAMILY)
  60. # define CONFIG_MPC86x 1
  61. #endif
  62. #elif defined(CONFIG_5xx)
  63. #include <asm/5xx_immap.h>
  64. #elif defined(CONFIG_MPC5xxx)
  65. #include <mpc5xxx.h>
  66. #elif defined(CONFIG_MPC512X)
  67. #include <asm/immap_512x.h>
  68. #elif defined(CONFIG_MPC8220)
  69. #include <asm/immap_8220.h>
  70. #elif defined(CONFIG_8260)
  71. #if defined(CONFIG_MPC8247) \
  72. || defined(CONFIG_MPC8248) \
  73. || defined(CONFIG_MPC8271) \
  74. || defined(CONFIG_MPC8272)
  75. #define CONFIG_MPC8272_FAMILY 1
  76. #endif
  77. #if defined(CONFIG_MPC8272_FAMILY)
  78. #define CONFIG_MPC8260 1
  79. #endif
  80. #include <asm/immap_8260.h>
  81. #endif
  82. #ifdef CONFIG_MPC86xx
  83. #include <mpc86xx.h>
  84. #include <asm/immap_86xx.h>
  85. #endif
  86. #ifdef CONFIG_MPC85xx
  87. #include <mpc85xx.h>
  88. #include <asm/immap_85xx.h>
  89. #endif
  90. #ifdef CONFIG_MPC83xx
  91. #include <mpc83xx.h>
  92. #include <asm/immap_83xx.h>
  93. #endif
  94. #ifdef CONFIG_4xx
  95. #include <asm/ppc4xx.h>
  96. #endif
  97. #ifdef CONFIG_HYMOD
  98. #include <board/hymod/hymod.h>
  99. #endif
  100. #ifdef CONFIG_ARM
  101. #define asmlinkage /* nothing */
  102. #endif
  103. #ifdef CONFIG_BLACKFIN
  104. #include <asm/blackfin.h>
  105. #endif
  106. #ifdef CONFIG_SOC_DA8XX
  107. #include <asm/arch/hardware.h>
  108. #endif
  109. #include <part.h>
  110. #include <flash.h>
  111. #include <image.h>
  112. #ifdef DEBUG
  113. #define _DEBUG 1
  114. #else
  115. #define _DEBUG 0
  116. #endif
  117. /*
  118. * Output a debug text when condition "cond" is met. The "cond" should be
  119. * computed by a preprocessor in the best case, allowing for the best
  120. * optimization.
  121. */
  122. #define debug_cond(cond, fmt, args...) \
  123. do { \
  124. if (cond) \
  125. printf(fmt, ##args); \
  126. } while (0)
  127. #define debug(fmt, args...) \
  128. debug_cond(_DEBUG, fmt, ##args)
  129. /*
  130. * An assertion is run-time check done in debug mode only. If DEBUG is not
  131. * defined then it is skipped. If DEBUG is defined and the assertion fails,
  132. * then it calls panic*( which may or may not reset/halt U-Boot (see
  133. * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
  134. * before release, and after release it is hoped that they don't matter. But
  135. * in any case these failing assertions cannot be fixed with a reset (which
  136. * may just do the same assertion again).
  137. */
  138. void __assert_fail(const char *assertion, const char *file, unsigned line,
  139. const char *function);
  140. #define assert(x) \
  141. ({ if (!(x) && _DEBUG) \
  142. __assert_fail(#x, __FILE__, __LINE__, __func__); })
  143. #define error(fmt, args...) do { \
  144. printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
  145. ##args, __FILE__, __LINE__, __func__); \
  146. } while (0)
  147. #ifndef BUG
  148. #define BUG() do { \
  149. printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
  150. panic("BUG!"); \
  151. } while (0)
  152. #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
  153. #endif /* BUG */
  154. /* Force a compilation error if condition is true */
  155. #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
  156. typedef void (interrupt_handler_t)(void *);
  157. #include <asm/u-boot.h> /* boot information for Linux kernel */
  158. #include <asm/global_data.h> /* global data used for startup functions */
  159. /*
  160. * enable common handling for all TQM8xxL/M boards:
  161. * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
  162. * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
  163. * and for the TQM885D board
  164. */
  165. #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
  166. defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
  167. defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
  168. # ifndef CONFIG_TQM8xxM
  169. # define CONFIG_TQM8xxM
  170. # endif
  171. #endif
  172. #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
  173. defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
  174. defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
  175. defined(CONFIG_TQM885D)
  176. # ifndef CONFIG_TQM8xxL
  177. # define CONFIG_TQM8xxL
  178. # endif
  179. #endif
  180. #ifndef CONFIG_SERIAL_MULTI
  181. #if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2) \
  182. || defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) \
  183. || defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
  184. #define CONFIG_SERIAL_MULTI 1
  185. #endif
  186. #endif /* CONFIG_SERIAL_MULTI */
  187. /*
  188. * General Purpose Utilities
  189. */
  190. #define min(X, Y) \
  191. ({ typeof (X) __x = (X); \
  192. typeof (Y) __y = (Y); \
  193. (__x < __y) ? __x : __y; })
  194. #define max(X, Y) \
  195. ({ typeof (X) __x = (X); \
  196. typeof (Y) __y = (Y); \
  197. (__x > __y) ? __x : __y; })
  198. #define MIN(x, y) min(x, y)
  199. #define MAX(x, y) max(x, y)
  200. #if defined(CONFIG_ENV_IS_EMBEDDED)
  201. #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
  202. #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
  203. (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
  204. defined(CONFIG_ENV_IS_IN_NVRAM)
  205. #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
  206. #else
  207. #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
  208. #endif
  209. /**
  210. * container_of - cast a member of a structure out to the containing structure
  211. * @ptr: the pointer to the member.
  212. * @type: the type of the container struct this is embedded in.
  213. * @member: the name of the member within the struct.
  214. *
  215. */
  216. #define container_of(ptr, type, member) ({ \
  217. const typeof( ((type *)0)->member ) *__mptr = (ptr); \
  218. (type *)( (char *)__mptr - offsetof(type,member) );})
  219. /*
  220. * Function Prototypes
  221. */
  222. void hang (void) __attribute__ ((noreturn));
  223. int timer_init(void);
  224. int cpu_init(void);
  225. /* */
  226. phys_size_t initdram (int);
  227. int display_options (void);
  228. void print_size(unsigned long long, const char *);
  229. int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen);
  230. /* common/main.c */
  231. void main_loop (void);
  232. int run_command (const char *cmd, int flag);
  233. #ifdef CONFIG_CMD_PXE
  234. int run_command2(const char *cmd, int flag);
  235. #endif
  236. int readline (const char *const prompt);
  237. int readline_into_buffer (const char *const prompt, char * buffer);
  238. int parse_line (char *, char *[]);
  239. void init_cmd_timeout(void);
  240. void reset_cmd_timeout(void);
  241. #ifdef CONFIG_MENU
  242. int abortboot(int bootdelay);
  243. #endif
  244. /* arch/$(ARCH)/lib/board.c */
  245. void board_init_f (ulong) __attribute__ ((noreturn));
  246. void board_init_r (gd_t *, ulong) __attribute__ ((noreturn));
  247. int checkboard (void);
  248. int checkflash (void);
  249. int checkdram (void);
  250. int last_stage_init(void);
  251. extern ulong monitor_flash_len;
  252. int mac_read_from_eeprom(void);
  253. extern u8 _binary_dt_dtb_start[]; /* embedded device tree blob */
  254. /* common/flash.c */
  255. void flash_perror (int);
  256. /* common/cmd_source.c */
  257. int source (ulong addr, const char *fit_uname);
  258. extern ulong load_addr; /* Default Load Address */
  259. extern ulong save_addr; /* Default Save Address */
  260. extern ulong save_size; /* Default Save Size */
  261. /* common/cmd_doc.c */
  262. void doc_probe(unsigned long physadr);
  263. /* common/cmd_net.c */
  264. int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
  265. /* common/cmd_nvedit.c */
  266. int env_init (void);
  267. void env_relocate (void);
  268. int envmatch (uchar *, int);
  269. char *getenv (const char *);
  270. int getenv_f (const char *name, char *buf, unsigned len);
  271. ulong getenv_ulong(const char *name, int base, ulong default_val);
  272. int saveenv (void);
  273. #ifdef CONFIG_PPC /* ARM version to be fixed! */
  274. int inline setenv (const char *, const char *);
  275. #else
  276. int setenv (const char *, const char *);
  277. int setenv_ulong(const char *varname, ulong value);
  278. int setenv_addr(const char *varname, const void *addr);
  279. #endif /* CONFIG_PPC */
  280. #ifdef CONFIG_ARM
  281. # include <asm/mach-types.h>
  282. # include <asm/setup.h>
  283. # include <asm/u-boot-arm.h> /* ARM version to be fixed! */
  284. #endif /* CONFIG_ARM */
  285. #ifdef CONFIG_X86 /* x86 version to be fixed! */
  286. # include <asm/u-boot-x86.h>
  287. #endif /* CONFIG_X86 */
  288. #ifdef CONFIG_SANDBOX
  289. # include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */
  290. #endif
  291. #ifdef CONFIG_NDS32
  292. # include <asm/mach-types.h>
  293. # include <asm/u-boot-nds32.h>
  294. #endif /* CONFIG_NDS32 */
  295. #ifdef CONFIG_AUTO_COMPLETE
  296. int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
  297. #endif
  298. int get_env_id (void);
  299. void pci_init (void);
  300. void pci_init_board(void);
  301. void pciinfo (int, int);
  302. #if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000))
  303. int pci_pre_init (struct pci_controller *);
  304. int is_pci_host (struct pci_controller *);
  305. #endif
  306. #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
  307. # if defined(CONFIG_SYS_PCI_TARGET_INIT)
  308. void pci_target_init (struct pci_controller *);
  309. # endif
  310. # if defined(CONFIG_SYS_PCI_MASTER_INIT)
  311. void pci_master_init (struct pci_controller *);
  312. # endif
  313. #if defined(CONFIG_440SPE) || \
  314. defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
  315. defined(CONFIG_405EX)
  316. void pcie_setup_hoses(int busno);
  317. #endif
  318. #endif
  319. int misc_init_f (void);
  320. int misc_init_r (void);
  321. /* common/exports.c */
  322. void jumptable_init(void);
  323. /* common/kallsysm.c */
  324. const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
  325. /* api/api.c */
  326. void api_init (void);
  327. /* common/memsize.c */
  328. long get_ram_size (long *, long);
  329. /* $(BOARD)/$(BOARD).c */
  330. void reset_phy (void);
  331. void fdc_hw_init (void);
  332. /* $(BOARD)/eeprom.c */
  333. void eeprom_init (void);
  334. #ifndef CONFIG_SPI
  335. int eeprom_probe (unsigned dev_addr, unsigned offset);
  336. #endif
  337. int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
  338. int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
  339. #ifdef CONFIG_LWMON
  340. extern uchar pic_read (uchar reg);
  341. extern void pic_write (uchar reg, uchar val);
  342. #endif
  343. /*
  344. * Set this up regardless of board
  345. * type, to prevent errors.
  346. */
  347. #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
  348. # define CONFIG_SYS_DEF_EEPROM_ADDR 0
  349. #else
  350. #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
  351. # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
  352. #endif
  353. #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
  354. #if defined(CONFIG_SPI)
  355. extern void spi_init_f (void);
  356. extern void spi_init_r (void);
  357. extern ssize_t spi_read (uchar *, int, uchar *, int);
  358. extern ssize_t spi_write (uchar *, int, uchar *, int);
  359. #endif
  360. #ifdef CONFIG_RPXCLASSIC
  361. void rpxclassic_init (void);
  362. #endif
  363. void rpxlite_init (void);
  364. #ifdef CONFIG_MBX
  365. /* $(BOARD)/mbx8xx.c */
  366. void mbx_init (void);
  367. void board_serial_init (void);
  368. void board_ether_init (void);
  369. #endif
  370. #ifdef CONFIG_HERMES
  371. /* $(BOARD)/hermes.c */
  372. void hermes_start_lxt980 (int speed);
  373. #endif
  374. #ifdef CONFIG_EVB64260
  375. void evb64260_init(void);
  376. void debug_led(int, int);
  377. void display_mem_map(void);
  378. void perform_soft_reset(void);
  379. #endif
  380. /* $(BOARD)/$(BOARD).c */
  381. int board_early_init_f (void);
  382. int board_late_init (void);
  383. int board_postclk_init (void); /* after clocks/timebase, before env/serial */
  384. int board_early_init_r (void);
  385. void board_poweroff (void);
  386. #if defined(CONFIG_SYS_DRAM_TEST)
  387. int testdram(void);
  388. #endif /* CONFIG_SYS_DRAM_TEST */
  389. /* $(CPU)/start.S */
  390. #if defined(CONFIG_5xx) || \
  391. defined(CONFIG_8xx)
  392. uint get_immr (uint);
  393. #endif
  394. uint get_pir (void);
  395. #if defined(CONFIG_MPC5xxx)
  396. uint get_svr (void);
  397. #endif
  398. uint get_pvr (void);
  399. uint get_svr (void);
  400. uint rd_ic_cst (void);
  401. void wr_ic_cst (uint);
  402. void wr_ic_adr (uint);
  403. uint rd_dc_cst (void);
  404. void wr_dc_cst (uint);
  405. void wr_dc_adr (uint);
  406. int icache_status (void);
  407. void icache_enable (void);
  408. void icache_disable(void);
  409. int dcache_status (void);
  410. void dcache_enable (void);
  411. void dcache_disable(void);
  412. void mmu_disable(void);
  413. void relocate_code (ulong, gd_t *, ulong) __attribute__ ((noreturn));
  414. ulong get_endaddr (void);
  415. void trap_init (ulong);
  416. #if defined (CONFIG_4xx) || \
  417. defined (CONFIG_MPC5xxx) || \
  418. defined (CONFIG_74xx_7xx) || \
  419. defined (CONFIG_74x) || \
  420. defined (CONFIG_75x) || \
  421. defined (CONFIG_74xx) || \
  422. defined (CONFIG_MPC8220) || \
  423. defined (CONFIG_MPC85xx) || \
  424. defined (CONFIG_MPC86xx) || \
  425. defined (CONFIG_MPC83xx)
  426. unsigned char in8(unsigned int);
  427. void out8(unsigned int, unsigned char);
  428. unsigned short in16(unsigned int);
  429. unsigned short in16r(unsigned int);
  430. void out16(unsigned int, unsigned short value);
  431. void out16r(unsigned int, unsigned short value);
  432. unsigned long in32(unsigned int);
  433. unsigned long in32r(unsigned int);
  434. void out32(unsigned int, unsigned long value);
  435. void out32r(unsigned int, unsigned long value);
  436. void ppcDcbf(unsigned long value);
  437. void ppcDcbi(unsigned long value);
  438. void ppcSync(void);
  439. void ppcDcbz(unsigned long value);
  440. #endif
  441. #if defined (CONFIG_MICROBLAZE)
  442. unsigned short in16(unsigned int);
  443. void out16(unsigned int, unsigned short value);
  444. #endif
  445. #if defined (CONFIG_MPC83xx)
  446. void ppcDWload(unsigned int *addr, unsigned int *ret);
  447. void ppcDWstore(unsigned int *addr, unsigned int *value);
  448. void disable_addr_trans(void);
  449. void enable_addr_trans(void);
  450. #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
  451. void ddr_enable_ecc(unsigned int dram_size);
  452. #endif
  453. #endif
  454. /* $(CPU)/cpu.c */
  455. static inline int cpumask_next(int cpu, unsigned int mask)
  456. {
  457. for (cpu++; !((1 << cpu) & mask); cpu++)
  458. ;
  459. return cpu;
  460. }
  461. #define for_each_cpu(iter, cpu, num_cpus, mask) \
  462. for (iter = 0, cpu = cpumask_next(-1, mask); \
  463. iter < num_cpus; \
  464. iter++, cpu = cpumask_next(cpu, mask)) \
  465. int cpu_numcores (void);
  466. u32 cpu_mask (void);
  467. int is_core_valid (unsigned int);
  468. int probecpu (void);
  469. int checkcpu (void);
  470. int checkicache (void);
  471. int checkdcache (void);
  472. void upmconfig (unsigned int, unsigned int *, unsigned int);
  473. ulong get_tbclk (void);
  474. void reset_cpu (ulong addr);
  475. #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
  476. void ft_cpu_setup(void *blob, bd_t *bd);
  477. #ifdef CONFIG_PCI
  478. void ft_pci_setup(void *blob, bd_t *bd);
  479. #endif
  480. #endif
  481. /* $(CPU)/serial.c */
  482. int serial_init (void);
  483. void serial_setbrg (void);
  484. void serial_putc (const char);
  485. void serial_putc_raw(const char);
  486. void serial_puts (const char *);
  487. int serial_getc (void);
  488. int serial_tstc (void);
  489. void _serial_setbrg (const int);
  490. void _serial_putc (const char, const int);
  491. void _serial_putc_raw(const char, const int);
  492. void _serial_puts (const char *, const int);
  493. int _serial_getc (const int);
  494. int _serial_tstc (const int);
  495. /* $(CPU)/speed.c */
  496. int get_clocks (void);
  497. int get_clocks_866 (void);
  498. int sdram_adjust_866 (void);
  499. int adjust_sdram_tbs_8xx (void);
  500. #if defined(CONFIG_8260)
  501. int prt_8260_clks (void);
  502. #elif defined(CONFIG_MPC5xxx)
  503. int prt_mpc5xxx_clks (void);
  504. #endif
  505. #if defined(CONFIG_MPC512X)
  506. int prt_mpc512xxx_clks (void);
  507. #endif
  508. #if defined(CONFIG_MPC8220)
  509. int prt_mpc8220_clks (void);
  510. #endif
  511. #ifdef CONFIG_4xx
  512. ulong get_OPB_freq (void);
  513. ulong get_PCI_freq (void);
  514. #endif
  515. #if defined(CONFIG_S3C24X0) || \
  516. defined(CONFIG_LH7A40X) || \
  517. defined(CONFIG_S3C6400) || \
  518. defined(CONFIG_EP93XX)
  519. ulong get_FCLK (void);
  520. ulong get_HCLK (void);
  521. ulong get_PCLK (void);
  522. ulong get_UCLK (void);
  523. #endif
  524. #if defined(CONFIG_LH7A40X)
  525. ulong get_PLLCLK (void);
  526. #endif
  527. #if defined CONFIG_INCA_IP
  528. uint incaip_get_cpuclk (void);
  529. #endif
  530. #if defined(CONFIG_IMX)
  531. ulong get_systemPLLCLK(void);
  532. ulong get_FCLK(void);
  533. ulong get_HCLK(void);
  534. ulong get_BCLK(void);
  535. ulong get_PERCLK1(void);
  536. ulong get_PERCLK2(void);
  537. ulong get_PERCLK3(void);
  538. #endif
  539. ulong get_bus_freq (ulong);
  540. int get_serial_clock(void);
  541. #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
  542. ulong get_ddr_freq(ulong);
  543. #endif
  544. #if defined(CONFIG_MPC85xx)
  545. typedef MPC85xx_SYS_INFO sys_info_t;
  546. void get_sys_info ( sys_info_t * );
  547. #endif
  548. #if defined(CONFIG_MPC86xx)
  549. typedef MPC86xx_SYS_INFO sys_info_t;
  550. void get_sys_info ( sys_info_t * );
  551. static inline ulong get_ddr_freq(ulong dummy)
  552. {
  553. return get_bus_freq(dummy);
  554. }
  555. #endif
  556. #if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
  557. # if defined(CONFIG_440)
  558. # if defined(CONFIG_440SPE)
  559. unsigned long determine_sysper(void);
  560. unsigned long determine_pci_clock_per(void);
  561. # endif
  562. # endif
  563. typedef PPC4xx_SYS_INFO sys_info_t;
  564. int ppc440spe_revB(void);
  565. void get_sys_info ( sys_info_t * );
  566. #endif
  567. /* $(CPU)/cpu_init.c */
  568. #if defined(CONFIG_8xx) || defined(CONFIG_8260)
  569. void cpu_init_f (volatile immap_t *immr);
  570. #endif
  571. #if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx)
  572. void cpu_init_f (void);
  573. #endif
  574. int cpu_init_r (void);
  575. #if defined(CONFIG_8260)
  576. int prt_8260_rsr (void);
  577. #elif defined(CONFIG_MPC83xx)
  578. int prt_83xx_rsr (void);
  579. #endif
  580. /* $(CPU)/interrupts.c */
  581. int interrupt_init (void);
  582. void timer_interrupt (struct pt_regs *);
  583. void external_interrupt (struct pt_regs *);
  584. void irq_install_handler(int, interrupt_handler_t *, void *);
  585. void irq_free_handler (int);
  586. void reset_timer (void);
  587. ulong get_timer (ulong base);
  588. void enable_interrupts (void);
  589. int disable_interrupts (void);
  590. /* $(CPU)/.../commproc.c */
  591. int dpram_init (void);
  592. uint dpram_base(void);
  593. uint dpram_base_align(uint align);
  594. uint dpram_alloc(uint size);
  595. uint dpram_alloc_align(uint size,uint align);
  596. void bootcount_store (ulong);
  597. ulong bootcount_load (void);
  598. #define BOOTCOUNT_MAGIC 0xB001C041
  599. /* $(CPU)/.../<eth> */
  600. void mii_init (void);
  601. /* $(CPU)/.../lcd.c */
  602. ulong lcd_setmem (ulong);
  603. /* $(CPU)/.../video.c */
  604. ulong video_setmem (ulong);
  605. /* arch/$(ARCH)/lib/cache.c */
  606. void enable_caches(void);
  607. void flush_cache (unsigned long, unsigned long);
  608. void flush_dcache_all(void);
  609. void flush_dcache_range(unsigned long start, unsigned long stop);
  610. void invalidate_dcache_range(unsigned long start, unsigned long stop);
  611. void invalidate_dcache_all(void);
  612. void invalidate_icache_all(void);
  613. /* arch/$(ARCH)/lib/ticks.S */
  614. unsigned long long get_ticks(void);
  615. void wait_ticks (unsigned long);
  616. /* arch/$(ARCH)/lib/time.c */
  617. void __udelay (unsigned long);
  618. ulong usec2ticks (unsigned long usec);
  619. ulong ticks2usec (unsigned long ticks);
  620. int init_timebase (void);
  621. /* lib/gunzip.c */
  622. int gunzip(void *, int, unsigned char *, unsigned long *);
  623. int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
  624. int stoponerr, int offset);
  625. /* lib/net_utils.c */
  626. #include <net.h>
  627. static inline IPaddr_t getenv_IPaddr (char *var)
  628. {
  629. return (string_to_ip(getenv(var)));
  630. }
  631. /* lib/qsort.c */
  632. void qsort(void *base, size_t nmemb, size_t size,
  633. int(*compar)(const void *, const void *));
  634. int strcmp_compar(const void *, const void *);
  635. /* lib/time.c */
  636. void udelay (unsigned long);
  637. void mdelay(unsigned long);
  638. /* lib/uuid.c */
  639. void uuid_str_to_bin(const char *uuid, unsigned char *out);
  640. int uuid_str_valid(const char *uuid);
  641. /* lib/vsprintf.c */
  642. ulong simple_strtoul(const char *cp,char **endp,unsigned int base);
  643. int strict_strtoul(const char *cp, unsigned int base, unsigned long *res);
  644. unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base);
  645. long simple_strtol(const char *cp,char **endp,unsigned int base);
  646. void panic(const char *fmt, ...)
  647. __attribute__ ((format (__printf__, 1, 2), noreturn));
  648. int sprintf(char * buf, const char *fmt, ...)
  649. __attribute__ ((format (__printf__, 2, 3)));
  650. int vsprintf(char *buf, const char *fmt, va_list args);
  651. char *simple_itoa(ulong i);
  652. /* lib/strmhz.c */
  653. char * strmhz(char *buf, unsigned long hz);
  654. /* lib/crc32.c */
  655. #include <u-boot/crc.h>
  656. /* common/console.c */
  657. int console_init_f(void); /* Before relocation; uses the serial stuff */
  658. int console_init_r(void); /* After relocation; uses the console stuff */
  659. int console_assign(int file, const char *devname); /* Assign the console */
  660. int ctrlc (void);
  661. int had_ctrlc (void); /* have we had a Control-C since last clear? */
  662. void clear_ctrlc (void); /* clear the Control-C condition */
  663. int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */
  664. /*
  665. * STDIO based functions (can always be used)
  666. */
  667. /* serial stuff */
  668. int serial_printf (const char *fmt, ...)
  669. __attribute__ ((format (__printf__, 1, 2)));
  670. /* stdin */
  671. int getc(void);
  672. int tstc(void);
  673. /* stdout */
  674. void putc(const char c);
  675. void puts(const char *s);
  676. int printf(const char *fmt, ...)
  677. __attribute__ ((format (__printf__, 1, 2)));
  678. int vprintf(const char *fmt, va_list args);
  679. /* stderr */
  680. #define eputc(c) fputc(stderr, c)
  681. #define eputs(s) fputs(stderr, s)
  682. #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args)
  683. /*
  684. * FILE based functions (can only be used AFTER relocation!)
  685. */
  686. #define stdin 0
  687. #define stdout 1
  688. #define stderr 2
  689. #define MAX_FILES 3
  690. int fprintf(int file, const char *fmt, ...)
  691. __attribute__ ((format (__printf__, 2, 3)));
  692. void fputs(int file, const char *s);
  693. void fputc(int file, const char c);
  694. int ftstc(int file);
  695. int fgetc(int file);
  696. /*
  697. * CONSOLE multiplexing.
  698. */
  699. #ifdef CONFIG_CONSOLE_MUX
  700. #include <iomux.h>
  701. #endif
  702. int pcmcia_init (void);
  703. #ifdef CONFIG_STATUS_LED
  704. # include <status_led.h>
  705. #endif
  706. /*
  707. * Board-specific Platform code can reimplement show_boot_progress () if needed
  708. */
  709. void show_boot_progress(int val);
  710. /* Multicore arch functions */
  711. #ifdef CONFIG_MP
  712. int cpu_status(int nr);
  713. int cpu_reset(int nr);
  714. int cpu_disable(int nr);
  715. int cpu_release(int nr, int argc, char * const argv[]);
  716. #endif
  717. #endif /* __ASSEMBLY__ */
  718. #ifdef CONFIG_PPC
  719. /*
  720. * Has to be included outside of the #ifndef __ASSEMBLY__ section.
  721. * Otherwise might lead to compilation errors in assembler files.
  722. */
  723. #include <asm/cache.h>
  724. #endif
  725. /* Put only stuff here that the assembler can digest */
  726. #ifdef CONFIG_POST
  727. #define CONFIG_HAS_POST
  728. #ifndef CONFIG_POST_ALT_LIST
  729. #define CONFIG_POST_STD_LIST
  730. #endif
  731. #endif
  732. #ifdef CONFIG_INIT_CRITICAL
  733. #error CONFIG_INIT_CRITICAL is deprecated!
  734. #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
  735. #endif
  736. #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
  737. #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
  738. #define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
  739. #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
  740. #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
  741. #define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
  742. #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
  743. /*
  744. * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
  745. * is used to align DMA buffers.
  746. */
  747. #ifndef __ASSEMBLY__
  748. #include <asm/cache.h>
  749. #endif
  750. /*
  751. * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the
  752. * stack that meets the minimum architecture alignment requirements for DMA.
  753. * Such a buffer is useful for DMA operations where flushing and invalidating
  754. * the cache before and after a read and/or write operation is required for
  755. * correct operations.
  756. *
  757. * When called the macro creates an array on the stack that is sized such
  758. * that:
  759. *
  760. * 1) The beginning of the array can be advanced enough to be aligned.
  761. *
  762. * 2) The size of the aligned portion of the array is a multiple of the minimum
  763. * architecture alignment required for DMA.
  764. *
  765. * 3) The aligned portion contains enough space for the original number of
  766. * elements requested.
  767. *
  768. * The macro then creates a pointer to the aligned portion of this array and
  769. * assigns to the pointer the address of the first element in the aligned
  770. * portion of the array.
  771. *
  772. * Calling the macro as:
  773. *
  774. * ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024);
  775. *
  776. * Will result in something similar to saying:
  777. *
  778. * uint32_t buffer[1024];
  779. *
  780. * The following differences exist:
  781. *
  782. * 1) The resulting buffer is guaranteed to be aligned to the value of
  783. * ARCH_DMA_MINALIGN.
  784. *
  785. * 2) The buffer variable created by the macro is a pointer to the specified
  786. * type, and NOT an array of the specified type. This can be very important
  787. * if you want the address of the buffer, which you probably do, to pass it
  788. * to the DMA hardware. The value of &buffer is different in the two cases.
  789. * In the macro case it will be the address of the pointer, not the address
  790. * of the space reserved for the buffer. However, in the second case it
  791. * would be the address of the buffer. So if you are replacing hard coded
  792. * stack buffers with this macro you need to make sure you remove the & from
  793. * the locations where you are taking the address of the buffer.
  794. *
  795. * Note that the size parameter is the number of array elements to allocate,
  796. * not the number of bytes.
  797. *
  798. * This macro can not be used outside of function scope, or for the creation
  799. * of a function scoped static buffer. It can not be used to create a cache
  800. * line aligned global buffer.
  801. */
  802. #define ALLOC_CACHE_ALIGN_BUFFER(type, name, size) \
  803. char __##name[ROUND(size * sizeof(type), ARCH_DMA_MINALIGN) + \
  804. ARCH_DMA_MINALIGN - 1]; \
  805. \
  806. type *name = (type *) ALIGN((uintptr_t)__##name, ARCH_DMA_MINALIGN)
  807. /* Pull in stuff for the build system */
  808. #ifdef DO_DEPS_ONLY
  809. # include <environment.h>
  810. #endif
  811. #endif /* __COMMON_H_ */