123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167 |
- /*
- * (C) Copyright 2008
- * Benjamin Warren, biggerbadderben@gmail.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
- /*
- * netdev.h - definitions an prototypes for network devices
- */
- #ifndef _NETDEV_H_
- #define _NETDEV_H_
- /*
- * Board and CPU-specific initialization functions
- * board_eth_init() has highest priority. cpu_eth_init() only
- * gets called if board_eth_init() isn't instantiated or fails.
- * Return values:
- * 0: success
- * -1: failure
- */
- int board_eth_init(bd_t *bis);
- int cpu_eth_init(bd_t *bis);
- /* Driver initialization prototypes */
- int au1x00_enet_initialize(bd_t*);
- int bfin_EMAC_initialize(bd_t *bis);
- int dc21x4x_initialize(bd_t *bis);
- int davinci_emac_initialize(void);
- int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
- int e1000_initialize(bd_t *bis);
- int eepro100_initialize(bd_t *bis);
- int eth_3com_initialize (bd_t * bis);
- int fec_initialize (bd_t *bis);
- int greth_initialize(bd_t *bis);
- void gt6426x_eth_initialize(bd_t *bis);
- int inca_switch_initialize(bd_t *bis);
- int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
- int mcdmafec_initialize(bd_t *bis);
- int mcffec_initialize(bd_t *bis);
- int mpc512x_fec_initialize(bd_t *bis);
- int mpc5xxx_fec_initialize(bd_t *bis);
- int mpc8220_fec_initialize(bd_t *bis);
- int mpc82xx_scc_enet_initialize(bd_t *bis);
- int natsemi_initialize(bd_t *bis);
- int npe_initialize(bd_t *bis);
- int ns8382x_initialize(bd_t *bis);
- int pcnet_initialize(bd_t *bis);
- int plb2800_eth_initialize(bd_t *bis);
- int ppc_4xx_eth_initialize (bd_t *bis);
- int rtl8139_initialize(bd_t *bis);
- int rtl8169_initialize(bd_t *bis);
- int scc_initialize(bd_t *bis);
- int skge_initialize(bd_t *bis);
- int tsi108_eth_initialize(bd_t *bis);
- int uec_initialize(int index);
- int uli526x_initialize(bd_t *bis);
- int sh_eth_initialize(bd_t *bis);
- /* Boards with PCI network controllers can call this from their board_eth_init()
- * function to initialize whatever's on board.
- * Return value is total # of devices found */
- static inline int pci_eth_init(bd_t *bis)
- {
- int num = 0;
- #ifdef CONFIG_PCI
- #ifdef CONFIG_EEPRO100
- num += eepro100_initialize(bis);
- #endif
- #ifdef CONFIG_TULIP
- num += dc21x4x_initialize(bis);
- #endif
- #ifdef CONFIG_E1000
- num += e1000_initialize(bis);
- #endif
- #ifdef CONFIG_PCNET
- num += pcnet_initialize(bis);
- #endif
- #ifdef CONFIG_NATSEMI
- num += natsemi_initialize(bis);
- #endif
- #ifdef CONFIG_NS8382X
- num += ns8382x_initialize(bis);
- #endif
- #if defined(CONFIG_RTL8139)
- num += rtl8139_initialize(bis);
- #endif
- #if defined(CONFIG_RTL8169)
- num += rtl8169_initialize(bis);
- #endif
- #if defined(CONFIG_ULI526X)
- num += uli526x_initialize(bis);
- #endif
- #endif /* CONFIG_PCI */
- return num;
- }
- /*
- * Boards with mv88e61xx switch can use this by defining
- * CONFIG_MV88E61XX_SWITCH in respective board configheader file
- * the stuct and enums here are used to specify switch configuration params
- */
- #if defined(CONFIG_MV88E61XX_SWITCH)
- enum mv88e61xx_cfg_vlan {
- MV88E61XX_VLANCFG_DEFAULT,
- MV88E61XX_VLANCFG_ROUTER
- };
- enum mv88e61xx_cfg_mdip {
- MV88E61XX_MDIP_NOCHANGE,
- MV88E61XX_MDIP_REVERSE
- };
- enum mv88e61xx_cfg_ledinit {
- MV88E61XX_LED_INIT_DIS,
- MV88E61XX_LED_INIT_EN
- };
- enum mv88e61xx_cfg_rgmiid {
- MV88E61XX_RGMII_DELAY_DIS,
- MV88E61XX_RGMII_DELAY_EN
- };
- enum mv88e61xx_cfg_prtstt {
- MV88E61XX_PORTSTT_DISABLED,
- MV88E61XX_PORTSTT_BLOCKING,
- MV88E61XX_PORTSTT_LEARNING,
- MV88E61XX_PORTSTT_FORWARDING
- };
- struct mv88e61xx_config {
- char *name;
- enum mv88e61xx_cfg_vlan vlancfg;
- enum mv88e61xx_cfg_rgmiid rgmii_delay;
- enum mv88e61xx_cfg_prtstt portstate;
- enum mv88e61xx_cfg_ledinit led_init;
- enum mv88e61xx_cfg_mdip mdip;
- u32 ports_enabled;
- u8 cpuport;
- };
- int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
- #endif /* CONFIG_MV88E61XX_SWITCH */
- #endif /* _NETDEV_H_ */
|