CHANGELOG 66 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963
  1. ======================================================================
  2. Changes for U-Boot 1.0.2:
  3. ======================================================================
  4. * Patch by Markus Pietrek, 24 Feb 2004:
  5. NS9750 DevBoard added
  6. * Patch by Pierre AUBERT, 24 Feb 2004
  7. add USB support for MPC5200
  8. * Patch by Steven Scholz, 24 Feb 2004:
  9. - fix MII commands to use values from last command
  10. * Patch by Torsten Demke, 24 Feb 2004:
  11. Add support for the eXalion platform (SPSW-8240, F-30, F-300)
  12. * Patch by Rahul Shanbhag, 19 Feb 2004:
  13. Fixes for for OMAP1610 board:
  14. - shift some IRQ specific code to platform.S file
  15. - remove duplicatewatchdog reset code from start.S
  16. * Make Auto-MDIX Support configurable on INCA-IP board
  17. * Fix license for mkimage tool
  18. * Patch by Masami Komiya, 24 Feb 2004:
  19. Update NetBootFileXferSize in NFS code
  20. * Patch by Scott McNutt, 24 Feb 2004:
  21. fix packet length in NFS code
  22. * Patch by Masami Komiy, 22 Feb 2004:
  23. Add support for NFS for file download
  24. * Patch by Andrea Scian, 17 Feb 2004:
  25. Add support for S3C44B0 processor and DAVE B2 board
  26. * Patch by Steven Scholz, 20 Feb 2004:
  27. - Add support for MII commands on AT91RM9200 boards
  28. - some cleanup in AT91RM9200 ethernet code
  29. * Patch by Peter Ryser, 20 Feb 2004:
  30. Add support for the Xilinx ML300 platform
  31. * Patch by Stephan Linz, 17 Feb 2004:
  32. Fix watchdog support for NIOS
  33. * Patch by Josh Fryman, 16 Feb 2004:
  34. Fix byte-swapping for cfi_flash.c for different bus widths
  35. * Patch by Jon Diekema, 14 Jeb 2004:
  36. Remove duplicate "FPGA Support" notes from the README file
  37. * Patches by Reinhard Meyer, 14 Feb 2004:
  38. - update board/emk tree; use common flash driver
  39. - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
  40. [adapted for other PPC CPUs -- wd]
  41. - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
  42. * Patch by Jon Diekema, 13 Feb 2004:
  43. Call show_boot_progress() whenever POST "FAILED" is printed.
  44. * Patch by Nishant Kamat, 13 Feb 2004:
  45. Add support for TI OMAP1610 H2 Board
  46. Fixes for cpu/arm926ejs/interrupt.c
  47. (based on Richard Woodruff's patch for arm925, 16 Oct 03)
  48. Fix for a timer bug in OMAP1610 Innovator
  49. Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
  50. * Patches by Stephan Linz, 12 Feb 2004:
  51. - add support for NIOS timer with variable period preload counter value
  52. - prepare POST framework support for NIOS targets
  53. * Patch by Denis Peter, 11 Feb 2004:
  54. add POST support for the MIP405 board
  55. * Patch by Laurent Mohin, 10 Feb 2004:
  56. Fix buffer overflow in common/usb.c
  57. * Patch by Tolunay Orkun, 10 Feb 2004:
  58. Add support for Cogent CSB272 board
  59. * Patch by Thomas Elste, 10 Feb 2004:
  60. Add support for NET+50 CPU and ModNET50 board
  61. * Patch by Sam Song, 10 Feb 2004:
  62. Fix typos in cfi_flash.c
  63. * Patch by Leon Kukovec, 10 Feb 2004
  64. Fixed long dir entry slot id calculation in get_vfatname
  65. * Patch by Robin Gilks, 10 Feb 2004:
  66. add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
  67. !=, <>, <, >, <=, >=)
  68. * Fix problem with side effects in macros in include/usb.h
  69. * Patch by David Benson, 13 Nov 2003:
  70. bug 841358 - fix TFTP download size limit
  71. * Fixing bug 850768:
  72. improper flush_cache() in load_serial()
  73. * Fixing bug 834943:
  74. MPC8540 - missing volatile declarations
  75. * Patch by Stephen Williams, 09 Feb 2004:
  76. Add support for Xilinx SystemACE chip:
  77. - New files common/cmd_ace.c and include/systemace.h
  78. - Hook systemace support into cmd_fat and the partition manager
  79. * Patch by Travis Sawyer, 09 Feb 2004:
  80. Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
  81. * Patch by Travis Sawyer, 09 Feb 2004:
  82. o 440GX:
  83. - Fix PCI Indirect access for type 1 config cycles with ppc440.
  84. - Add phymode for 440 enet
  85. - fix pci pre init
  86. o XPedite1K:
  87. - Change board_pre_init to board_early_init_f
  88. - Add user flash to bus controller setup
  89. - Fix pci pre init
  90. - Fix is_pci_host to check GPIO for monarch bit
  91. - Force xpedite1k to pci conventional mode (via #define option)
  92. * Patch by Brad Kemp, 4 Feb 2004:
  93. - handle the machine check that is generated during the PCI scans
  94. on 82xx processors.
  95. - define the registers used in the IMMR by the PCI subsystem.
  96. * Patch by Pierre Aubert, 03 Feb 2004:
  97. cpu/mpc5xxx/start.S: copy MBAR into SPR311
  98. * Patch by Jeff Angielski, 03 Feb 2004:
  99. Fix copy & paste error in cpu/mpc8260/pci.c
  100. * Patch by Reinhard Meyer, 24 Jan 2004:
  101. Fix typo in cpu/mpc5xxx/pci_mpc5200.c
  102. * Add Auto-MDIX support for INCA-IP
  103. * Some code cleanup
  104. * Patch by Josef Baumgartner, 10 Feb 2004:
  105. Fixes for Coldfire port
  106. * Patch by Brad Kemp, 11 Feb 2004:
  107. Fix CFI flash driver problems
  108. * Make sure to use a bus clock divider of 2 only when running TQM8xxM
  109. modules at CPU clock frequencies above 66 MHz.
  110. * Optimize flash programming speed for LWMON (by another 100% :-)
  111. * Patch by Jian Zhang, 3 Feb 2004:
  112. - Changed the incorrect FAT12BUFSIZE
  113. - data_begin in fsdata can be negative. Changed it to be short.
  114. * Patches by Stephan Linz, 30 Jan 2004:
  115. 1: - board/altera/common/flash.c:flash_erase():
  116. o allow interrupts befor get_timer() call
  117. o check-up each erased sector and avoid unexpected timeouts
  118. - board/altera/dk1c20/dk1s10.c:board_early_init_f():
  119. o enclose sevenseg_set() in cpp condition
  120. - remove the ASMI configuration for DK1S10_standard_32 (never present)
  121. - fix some typed in mistakes in the NIOS documentation
  122. 2: - split DK1C20 configuration into several header files:
  123. o two new files for each NIOS CPU description
  124. o U-Boot related part is remaining in DK1C20.h
  125. 3: - split DK1S10 configuration into several header files:
  126. o two new files for each NIOS CPU description
  127. o U-Boot related part is remaining in DK1S10.h
  128. 4: - Add support for the Microtronix Linux Development Kit
  129. NIOS CPU configuration at the Altera Nios Development Kit,
  130. Stratix Edition (DK-1S10)
  131. 5: - Add documentation for the Altera Nios Development Kit,
  132. Stratix Edition (DK-1S10)
  133. 6: - Add support for the Nios Serial Peripharel Interface (SPI)
  134. (master only)
  135. 7: - Add support for the common U-Boot SPI framework at
  136. RTC driver DS1306
  137. * Patch by Rahul Shanbhag, 28 Jan 2004:
  138. Fix flash protection/locking handling for OMAP1610 innovator board.
  139. * Patch by Rolf Peukert, 28 Jan 2004:
  140. fix flash write problems on CSB226 board (write with 32 bit bus width)
  141. * Patches by Mark Jonas, 16 Jan 2004:
  142. - fix rounding error when calculating baudrates for MPC5200 PSCs
  143. - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
  144. time which is not supported
  145. * Patch by Yuli Barcohen, 26 Jan 2004:
  146. Allow bzip2 compression for small memory footprint boards
  147. * Patch by Brad Kemp, 21 Jan 2004:
  148. Add support for CFI flash driver for both the Intel and the AMD
  149. command sets.
  150. * Patch by Travis Sawyer, 20 Jan 2004:
  151. Fix pci bridge auto enumeration of sibling p2p bridges.
  152. * Patch by Tolunay Orkun, 12 Jan 2004:
  153. Add some delays as needed for Intel LXT971A PHY support
  154. * Patches by Stephan Linz, 09 Jan 2004:
  155. - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
  156. - make DK1C20 board configuration related to ASMI conform to
  157. documentation
  158. * Patch by Anders Larsen, 09 Jan 2004:
  159. ARM memory layout fixes: the abort-stack is now set up in the
  160. correct RAM area, and the BSS is zeroed out as it should be.
  161. Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
  162. of the linker scripts are replaced by '__bss_start' and '_end',
  163. resp., which is a further step to eliminate unnecessary differences
  164. between the implementation of the CPU architectures.
  165. * Patch by liang a lei, 9 Jan 2004:
  166. Fix Intel 28F128J3 ID in include/flash.h
  167. * Patch by Masami Komiya, 09 Jan 2004:
  168. add support for TB0229 board (NEC VR4131 MIPS processor)
  169. * Patch by Leon Kukovec, 12 Dec 2003:
  170. changed extern __inline__ into static __inline__ in
  171. include/linux/byteorder/swab.h
  172. * Patch by Travis Sawyer, 30 Dec 2003:
  173. Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
  174. select MDI port based on enabled EMAC device.
  175. Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
  176. base PrPMC board.
  177. * Patch by Wolter Kamphuis, 15 Dec 2003:
  178. made CONFIG_SILENT_CONSOLE usable on all architectures
  179. * Disable date command on TQM866M - there is no RTC on MPC866
  180. * Fix variable CPU clock for MPC859/866 systems for low CPU clocks
  181. * Implement adaptive SDRAM timing configuration based on actual CPU
  182. clock frequency for INCA-IP; fix problem with board hanging when
  183. switching from 150MHz to 100MHz
  184. * Add PCMCIA CS support for BMS2003 board
  185. * Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
  186. see doc/README.MPC866 for details;
  187. implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
  188. calculate CPU clock frequency from PLL register values.
  189. * Add support for 128 MB RAM on TQM8xxL/M modules
  190. * Fix PS/2 keyboard problem caused by statically initialized variable
  191. pointing to a location in flash
  192. * Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
  193. * The PS/2 mux on the BMS2003 board needs 450 ms after power on
  194. before we can access it; add delay in case we are faster (with no
  195. CF card inserted)
  196. * Cleanup of some init functions
  197. * Make sure SCC Ethernet is always stopped by the time we boot Linux
  198. to avoid Linux crashes by early packets coming in.
  199. * Accelerate flash accesses on LWMON board by using buffered writes
  200. * Fix typo in Makefile;
  201. fix problem with PARTNUM detection
  202. * Patch by Reinhard Meyer, 09 Jan 2004:
  203. - add RTC support for MPC5200 based boards (requires RTC_XTAL)
  204. * Add support for IDE LED on BMS2003 board
  205. (exclusive with status LED!)
  206. * Add support for PS/2 keyboard (used with PS/2 multiplexor on
  207. BMS2003 board)
  208. * Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
  209. Add common files for "emk" boards
  210. * Add a common get_ram_size() function and modify the the
  211. board-specific files to invoke that common implementation.
  212. ======================================================================
  213. Changes for U-Boot 1.0.1:
  214. ======================================================================
  215. * Set default clock for INCA-IP to 150 MHz
  216. * Make BMS2003 use a separate config file to avoid #ifdef mess;
  217. add I2C support; add support for DS1337 RTC
  218. * Add CompactFlash support for BMS2003 board
  219. * Add support for status LED on BMS2003 board
  220. * Patch by Scott McNutt, 02 Jan 2004:
  221. Add support for the Nios Active Serial Memory Interface (ASMI)
  222. on Cyclone devices
  223. * Patch by Andrea Marson, 16 Dec 2003:
  224. Add support for the PPChameleon ME and HI modules
  225. * Patch by Yuli Barcohen, 22 Dec 2003:
  226. Add support for Motorola DUET ADS board (MPC87x/88x)
  227. * Patch by Robert Schwebel, 15 Dec 2003:
  228. add support for cramfs (uses JFFS2 command interface)
  229. * Patches by Stephan Linz, 11 Dec 2003:
  230. - more documentation for NIOS port
  231. - new struct nios_pio_t, struct nios_spi_t
  232. - Reconfiguration for NIOS Development Kit DK1C20:
  233. o move board related code from board/dk1c20
  234. to board/altera/dk1c20
  235. o create a new common source path board/altera/common
  236. and move generic flash access stuff into it
  237. o change/expand configuration file DK1C20.h
  238. - Add support for NIOS Development Kit DK1S10
  239. - Add status LED support for NIOS systems
  240. - Add dual 7-segment LED support for Altera NIOS DevKits
  241. * Patch by Ronen Shitrit, 10 Dec 2003:
  242. Add support for the Marvell DB64360 / DB64460 development boards
  243. * Patch by Detlev Zundel, 10 Dec 2003:
  244. fix dependency problem in examples/Makefile
  245. * Patch by Denis Peter, 8 Dec 2003
  246. - add support for the PATI board (MPC555)
  247. - add SPI support for the MPC5xx
  248. * Patch by Anders Larsen, 08 Dec 2003:
  249. add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
  250. to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
  251. cleanup some redundand #defines
  252. * Patch by André Schwarz, 8 Dec 2003:
  253. fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
  254. - TX and RX deskriptors must be quad-word aligned
  255. - does not work with only one TX deskriptor
  256. - standard reset method does not work
  257. * Patch by Masami Komiya, 08 Dec 2003:
  258. add RTL8139 ethernet driver
  259. * Patches by Ed Okerson, 07 Dec 2003:
  260. - fix ethernet for the AU1x00 processors in little-endian mode.
  261. - extend memsetup.S for the AU1x00 processors in BE and LE modes
  262. * Minor code cleanup (coding style)
  263. * Patch by Reinhard Meyer, 30 Dec 2003:
  264. - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
  265. - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
  266. - turned debug print of PHY registers into a function (called in two places)
  267. - added support for EMK MPC5200 based modules
  268. * Fix MPC8xx PLPRCR_MFD_SHIFT typo
  269. * Add support for TQM866M modules
  270. * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
  271. * Fix a few compiler warnings
  272. * Patch by Reinhard Meyer, 28 Dec 2003:
  273. Add initial support for TOP5200 board
  274. * Make CPU clock on ICA-IP board controllable by a "cpuclk"
  275. environment variable which can set to "100", "133", or "150". The
  276. CPU clock will be configured accordingly upon next reboot. Other
  277. values are ignored. In case of an invalid or undefined "cpuclk"
  278. value, the compile-time default CPU clock speed will be used.
  279. * Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
  280. window that is used to access the UART registers by the Linux driver)
  281. * Patch by Reinhard Meyer, 20 Dec 2003:
  282. Fix clock calculation for the MPC5200 for higher clock frequencies
  283. (above 2**32 / 10 = 429.5 MHz).
  284. * Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
  285. * Fix IceCube CLKIN configuration (it's 33.000000MHz)
  286. * Add new configuration for IceCube board with DDR memory
  287. * Update TRAB memory configurations
  288. * Add JFFS2 support for INCA-IP board
  289. * Patch by Bill Hargen, 09 Dec 2003:
  290. - BUBINGA405EP: changed flash driver to protect top sector containing
  291. first instruction.
  292. - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
  293. - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
  294. - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
  295. - 405EP: added/fixed support for "reginfo" command.
  296. - 4xx: removed spurious MII error messages on "mii info" command.
  297. * Patch by Bernhard Kuhn, 28 Nov 2003:
  298. add support for Coldfire CPU
  299. add support for Motorola M5272C3 and M5282EVB boards
  300. * Patch by Pierre Aubert, 24 Nov 2003:
  301. - add a return value for the fpga command
  302. - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
  303. is defined. If ide_preinit fails, ide_init is aborted.
  304. - fix an endianess problem in fat.h
  305. * Patch by Wolter Kamphuis, 05 Dec 2003:
  306. Add support for SNMC's QS850/QS823/QS860T boards
  307. * Patch by Yuli Barcohen, 3 Dec 2003:
  308. "revive" U-Boot support for old Motorola MPC860ADS board
  309. * Patch by Cam(ilo?), 03 Dec 2003:
  310. make examples build even with broken Montavista objcopy
  311. * Patch by Pavel Bartusek, 27 Nov 2003:
  312. fix conversion problem with "bootretry" evironment variable
  313. * Patch by Andre Schwarz, 24 Nov 2003:
  314. add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
  315. * Patch by Pavel Bartusek, 21 Nov 2003:
  316. set ZMII bridge speed on 440
  317. * Patch by Anders Larsen, 17 Nov 2003:
  318. Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
  319. * Patches by David Müller, 14 Nov 2003:
  320. - board/mpl/common/common_util.c
  321. * implement support for BZIP2 compressed images
  322. * various cleanups (printf -> puts, ...)
  323. - board/mpl/common/flash.c
  324. * report correct errors to upper layers
  325. * check the erase fail and VPP low bits in status reg
  326. - board/mpl/vcma9/cmd_vcma9.c
  327. - board/mpl/vcma9/flash.c
  328. * various cleanups (printf -> puts, ...)
  329. - common/cmd_usb.c
  330. * fix typo in comment
  331. - cpu/arm920t/usb_ohci.c
  332. * support for S3C2410 is missing in #if line
  333. - drivers/cs8900.c
  334. * reinit some registers in case of error (cable missing, ...)
  335. - fs/fat/fat.c
  336. * support for USB/MMC devices is missing in #if line
  337. - include/configs/MIP405.h
  338. - include/configs/PIP405.h
  339. * enable BZIP2 support
  340. * enlarge malloc space to 1MiB because of BZIP2 support
  341. - include/configs/VCMA9.h
  342. * enable BZIP2 support
  343. * enlarge malloc space to 1MiB because of BZIP2 support
  344. * enable USB support
  345. - lib_arm/armlinux.c
  346. * change calling convention of ARM Linux kernel as
  347. described on http://www.arm.linux.org.uk/developer/booting.php
  348. * Patch by Thomas Lange, 14 Nov 2003:
  349. Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
  350. support all these AMD boards.
  351. * Patch by Thomas Lange, 14 Nov 2003:
  352. Workaround for mips au1x00 physical memory accesses (the au1x00
  353. uses a 36 bit bus internally and cannot access physical memory
  354. directly. Use the uncached SDRAM address instead of the physical
  355. one.)
  356. * Patch by Xue Ligong (Joe), 13 Nov 2003:
  357. add Realtek 8019 ethernet driver
  358. * Patch by Yuli Barcohen, 13 Nov 2003:
  359. MPC826xADS/PQ2FADS cleanup
  360. * Patch by Anders Larsen, 12 Nov 2003:
  361. Update README to mark the PORTIO commands non-standard
  362. * Patch by Nicolas Lacressonnière, 12 Nov 2003:
  363. update for for Atmel AT91RM9200DK development kit:
  364. - support for environment variables in DataFlash
  365. - Atmel DataFlash AT45DB1282 support
  366. * Patch by Jeff Carr, 11 Nov 2003:
  367. add support for new version of 8270 processors
  368. * Patches by George G. Davis, 05 Nov 2003:
  369. - only pass the ARM linux initrd tag to the kernel when an initrd
  370. is actually present
  371. - update omap1510inn configuration file
  372. * Patches by Stephan Linz, 3 Nov 2003:
  373. - more endianess fixes for LAN91C111 driver
  374. - CFG_HZ configuration patch for NIOS Cyclone board
  375. * Patch by Stephan Linz, 28 Oct 2003:
  376. fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
  377. * Patch by Steven Scholz, 20 Oct 2003:
  378. - make "mii info <addr>" show infor for PHY at "addr" only
  379. - Endian fix for miiphy_info()
  380. * Patch by Gleb Natapov, 19 Sep 2003:
  381. Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
  382. * Patch by Anders Larsen, 17 Sep 2003:
  383. Bring ARM memory layout in sync with the documentation:
  384. stack and malloc-heap are now located _below_ the U-Boot code
  385. * Accelerate booting on TRAB board: read and check autoupdate image
  386. headers first instead of always reading the whole images.
  387. * Fix type in MPC5XXX code (pointed out by Victor Wren)
  388. * Enabled password check on RMU board
  389. * Fix configuration problem with IceCube in LOWBOOT configuration:
  390. envrionment got embedded, corrupting the image layout.
  391. * Fix NEC display names (it's 6440 [for 640x480], not 6640).
  392. * Added BMS2003 board
  393. add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
  394. * Fix flash driver for TRAB board (must use Unlock Bypass Reset
  395. command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
  396. and CPLD
  397. * Use "-fPIC" instead of "-mrelocatable" to prevent problems with
  398. recent tools
  399. * Add checksum verification to 'imls' command
  400. * Add bd_info fields needed for 4xx Linux I2C driver
  401. * Patch by Martin Krause, 4 Nov. 2003:
  402. Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
  403. * Print used network interface when CONFIG_NET_MULTI is set
  404. * Patch by Bernhard Kuhn, 28 Oct 2003:
  405. Add low boot support for MPC5200
  406. * Fix problem with dual PCMCIA support (NSCU)
  407. * Fix MPC5200 I2C initialization function
  408. ======================================================================
  409. Changes for U-Boot 1.0.0:
  410. ======================================================================
  411. * Fix parameter passing to standalone images with bootm command
  412. * Patch by Kyle Harris, 30 Oct 2003:
  413. Fix build errors for ixdp425 board
  414. * Patch by David M. Horn, 29 Oct 2003:
  415. Fixes to build under CYGWIN
  416. * Get IceCube MGT5100 working (again)
  417. * Fix problems in memory test on some boards (which was not
  418. non-destructive as intended)
  419. * Patch by Gary Jennejohn, 28 Oct 2003:
  420. Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
  421. to prevent stack overflow on ARM systems
  422. * Patch by Stephan Linz, 28 Oct 2003:
  423. fix init sequence error for NIOS port
  424. * Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
  425. * Add CONFIG_VERSION_VARIABLE to TRAB configuration
  426. * Patch by Xiao Xianghua, 23 Oct 2003:
  427. small patch for mpc85xx
  428. * Fix small problem in MPC5200 I2C driver
  429. * Fix FCC3 support on ATC board
  430. * Correct header printing for multi-image files in do_bootm()
  431. * Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
  432. * Fix PCI problems on PPChameleon board
  433. * Patch by Steven Scholz, 18 Oct 2003:
  434. Fix AT91RM9200 ethernet driver
  435. * Patch by Nye Liu, 17 Oct 2003:
  436. Fix typo in include/mpc8xx.h
  437. * Patch by Richard Woodruff, 16 Oct 03:
  438. Fixes for cpu/arm925/interrupt.c
  439. - Initialize timestamp & lastdec vars.
  440. - fix timestamp overflows.
  441. - fix lastdec overflow.
  442. - smarter normalization to allow udelay() below 1ms to work.
  443. * Patch by Scott McNutt, 16 Oct
  444. add networking support for the Altera Nios Development Kit,
  445. Cyclone Edition (DK-1C20)
  446. * Patch by Jon Diekema, 14 Oct 2003:
  447. add hint about doc/README.silent to README file
  448. * Add CompactFlash support for NSCU
  449. * Fix PCI problems on PPChameleonEVB
  450. * TRAB auto-update: Base decision if we have to strip the image
  451. header on image type as encoded in the header
  452. (include image type patch by Martin Krause, 17 Oct 2003)
  453. * Patches by Xianghua Xiao, 15 Oct 2003:
  454. - Added Motorola CPU 8540/8560 support (cpu/85xx)
  455. - Added Motorola MPC8540ADS board support (board/mpc8540ads)
  456. - Added Motorola MPC8560ADS board support (board/mpc8560ads)
  457. * Fix flash timings on TRAB board
  458. * Make sure HUSH is initialized for running auto-update scripts
  459. * Make 5200 reset command _really_ reset the board, without running
  460. any other code after it
  461. * Fix errors with flash erase when range spans across banks
  462. that are mapped in reverse order
  463. * Fix flash mapping and display on P3G4 board
  464. * Patch by Kyle Harris, 15 Jul 2003:
  465. - add support for Intel IXP425 CPU
  466. - add support for IXDP425 eval board
  467. * Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
  468. for more information
  469. * Patch by Steven Scholz, 10 Oct 2003
  470. - Add support for Altera FPGA ACEX1K
  471. * Patches by Thomas Lange, 09 Oct 2003:
  472. - fix cmd_ide.c for non ppc boards (read/write functions did not
  473. add ATA base address)
  474. - fix for shannon board
  475. - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
  476. - Endian swap ATA identity for all big endian CPUs, not just PPC
  477. - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
  478. args to linux
  479. - add support for dbau1x00 board (MIPS32)
  480. * Patch by Sangmoon Kim, 07 Oct 2003:
  481. add support for debris board
  482. * Patch by Martin Krause, 09 Oct 2003:
  483. Fixes for TRAB board
  484. - /board/trab/rs485.c: correct baudrate
  485. - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
  486. udelay(); fix some timing problems with adc controller
  487. - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
  488. modify commands: touch and buzzer
  489. * Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
  490. (quick & dirty workaround for rogue pointer problem in get_vfatname());
  491. Use direct function calls for auto_update instead of hush commands
  492. * Patch by Scott McNutt, 04 Oct 2003:
  493. - add support for Altera Nios-32 CPU
  494. - add support for Nios Cyclone Development Kit (DK-1C20)
  495. * Patch by Steven Scholz, 29 Sep 2003:
  496. - A second parameter for bootm overwrites the load address for
  497. "Standalone Application" images.
  498. - bootm sets environment variable "filesize" to the resulting
  499. (uncompressed) data length for "Standalone Application" images
  500. when autostart is set to "no". Now you can do something like
  501. if bootm $fpgadata $some_free_ram ; then
  502. fpga load 0 $some_free_ram $filesize
  503. fi
  504. * Patch by Denis Peter, 25 Sept 2003:
  505. add support for the MIP405 Rev. C board
  506. * Patch by Yuli Barcohen, 25 Sep 2003:
  507. add support for Zephyr Engineering ZPC.1900 board
  508. * Patch by Anders Larsen, 23 Sep 2003:
  509. add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
  510. implemented for the x86 architecture)
  511. * Patch by Sangmoon Kim, 23 Sep 2003:
  512. fix pll_pci_to_mem_multiplier table for MPC8245
  513. * Patch by Anders Larsen, 22 Sep 2003:
  514. enable timed autoboot on PXA
  515. * Patch by David Müller, 22 Sep 2003:
  516. - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
  517. returns correct libgcc file path
  518. - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
  519. time on s3c24x0 systems
  520. * Patch by Jon Diekema, 19 Sep 2003:
  521. - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
  522. link state to the fault LED.
  523. - In NetLoop, make the Fault LED reflect the link status. The link
  524. status gets updated on entry, and on timeouts.
  525. * Patch by Anders Larsen, 18 Sep 2003:
  526. allow mkimage to build and run on Cygwin-hosted systems
  527. * Patch by Frank Müller, 18 Sep 2003:
  528. use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
  529. cpu/mpc8xx/fec.c
  530. * Patch by Pantelis Antoniou, 16 Sep 2003:
  531. add tool to compute fileds in the PLPRCR register for MPC86x
  532. * Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
  533. * Fix build problems under FreeBSD
  534. * Add generic filesystem image type
  535. * Make fatload set filesize environment variable
  536. * enable basic / medium / high-end configurations for PPChameleonEVB
  537. board; fix NAND code
  538. * enable TFTP client code to specify to the server the desired
  539. timeout value (see RFC-2349)
  540. * Improve SDRAM setup for TRAB board
  541. * Suppress all output with splashscreen configured only if "splashimage"
  542. is set
  543. * Fix problems with I2C support for mpc5200
  544. * Adapt TRAB configuration and auto_update to new memory layout
  545. * Add configuration for wtk board
  546. * Add support for the Sharp LQ065T9DR51U LCD display
  547. * Patch by Rune Torgersen, 17 Sep 2003:
  548. - Fixes for MPC8266 default config
  549. - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
  550. * Patches by Jon Diekema, 17 Sep 2003:
  551. - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
  552. env_common.c)
  553. - sbc8260 tweaks
  554. - adjust "help" output
  555. * Patches by Anders Larsen, 17 Sep 2003:
  556. - fix spelling errors
  557. - set GD_FLG_DEVINIT flag only after device function pointers
  558. are valid
  559. - Allow CFG_ALT_MEMTEST on systems where address zero isn't
  560. writeable
  561. - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
  562. - trigger watchdog while waiting in serial driver
  563. * Add auto-update code for TRAB board using USB memory sticks,
  564. support new configuration with more memory
  565. * disable MPC5200 bus pipelining as workaround for bus contention
  566. * Modify XLB arbiter priorities on MPC5200 so all devices use same
  567. priority; configure critical interrupts to be handled like external
  568. interrupts
  569. * Make IPB clock on MGT5100/MPC5200 configurable in board config file;
  570. go back to 66 MHz for stability
  571. * Patches by Jon Diekema, 15 Sep 2003:
  572. - add description for missing CFG_CMD_* entries in the README file
  573. - sacsng tweaks
  574. * Patch by Gleb Natapov, 14 Sep 2003:
  575. enable watchdog support for all MPC824x boards that have a watchdog
  576. * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
  577. "Non-octet Aligned Frame" errors we see at 100 Mbps
  578. * Patch by Sharad Gupta, 14 Sep 2003:
  579. fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
  580. * Patch by llandre, 11 Sep 2003:
  581. update configuration for PPChameleonEVB board
  582. * Patch by David Müller, 13 Sep 2003:
  583. various changes to VCMA9 board specific files
  584. * Add I2C support for MGT5100 / MPC5200
  585. * Patch by Rune Torgersen, 11 Sep 2003:
  586. Changed default memory option on MPC8266ADS to NOT be Page Based
  587. Interleave, since this doesn't work very well with the standard
  588. 16MB DIMM
  589. * Patch by George G. Davis, 12 Sep 2003:
  590. fix Makefile settings for sk98 driver
  591. * Patch by Stefan Roese, 12 Sep 2003:
  592. - new boards added: DP405, HUB405, PLU405, VOH405
  593. - some esd boards updated
  594. - cpu/ppc4xx/sdram.c: disable memory controller before setting
  595. first values
  596. - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
  597. * Patch by Martin Krause, 11 Sep 2003:
  598. add burn-in tests for TRAB board
  599. * Enable instruction cache on MPC5200 board
  600. * Patch by Denis Peter, 11 Sep 2003:
  601. - fix USB data pointer assignment for bulk only transfer.
  602. - prevent to display erased directories in FAT filesystem.
  603. * Change output format for NAND flash - make it look like for other
  604. memory, too
  605. ======================================================================
  606. Changes for U-Boot 0.4.8:
  607. ======================================================================
  608. * Add I2C and RTC support for RMU board
  609. * Patches by Denis Peter, 9 Sep 2003:
  610. add FAT support for IDE, SCSI and USB
  611. * Patches by Gleb Natapov, 2 Sep 2003:
  612. - cleanup of POST code for unsupported architectures
  613. - MPC824x locks way0 of data cache for use as initial RAM;
  614. this patch unlocks it after relocation to RAM and invalidates
  615. the locked entries.
  616. * Patch by Gleb Natapov, 30 Aug 2003:
  617. new I2C driver for mpc107 bridge. Now works from flash.
  618. * Patch by Dave Ellis, 11 Aug 2003:
  619. - JFFS2: fix typo in common/cmd_jffs2.c
  620. - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
  621. - JFFS2: remove node version 0 warning
  622. - JFFS2: accept JFFS2 PADDING nodes
  623. - SXNI855T: add AM29LV800 support
  624. - SXNI855T: move environment from EEPROM to flash
  625. - SXNI855T: boot from JFFS2 in NOR or NAND flash
  626. * Patch by Bill Hargen, 11 Aug 2003:
  627. fixes for I2C on MPC8240
  628. - fix i2c_write routine
  629. - fix iprobe command
  630. - eliminates use of global variables, plus dead code, cleanup.
  631. * Add support for USB Mass Storage Devices (BBB)
  632. (tested with USB memory sticks only)
  633. * Avoid flicker on TRAB's VFD
  634. * Add support for SK98xx driver
  635. * Add PCI support for SL8245 board
  636. * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
  637. or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
  638. Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
  639. * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
  640. to allow for more accurate baudrate settings
  641. (error now 0.7% at 115 kbps, instead of 3.5% before)
  642. * Patch by Andreas Mohr, 4 Sep 2003:
  643. Fix a lot of spelling errors
  644. * Add support for PPChameleon Eval Board
  645. * Add support for P3G4 board
  646. * Fix problem with MGT5100 FEC driver: add "early" MAC address
  647. initialization
  648. * Patch by Yuli Barcohen, 7 Aug 2003:
  649. check BCSR to detect if the board is configured in PCI mode
  650. ======================================================================
  651. Changes for U-Boot 0.4.7:
  652. ======================================================================
  653. * Patch by Raghu Krishnaprasad, 7 Aug 2003:
  654. add support for Adder II MPC852T module
  655. * Patch by George G. Davis, 19 Aug 2003:
  656. fix TI Innovator/OMAP1510 pin configs
  657. * Patches by Kshitij, 18 Aug 2003
  658. - add support for arm926ejs cpu core
  659. - add support for TI OMAP 1610 Innovator Board
  660. * Patch by Yuli Barcohen, 14 Aug 2003:
  661. add support for bzip2 uncompression
  662. * Add GCC library to examples/Makefile so GCC utility functions will
  663. be resolved, too
  664. * Add I2C and RTC support for RMU board using software I2C driver
  665. (because of better response to iprobe command); fix problem with
  666. "reset" command
  667. * Patch by Matthias Fuchs, 28 Aug 2003:
  668. Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
  669. CONFIG_BOOTP_MAKS (see README).
  670. * Fix ICU862 environment problem
  671. * Fix RAM size detection for RMU board
  672. * Implement "reset" for MGT5100/MPC5200 systems
  673. ======================================================================
  674. Changes for U-Boot 0.4.6:
  675. ======================================================================
  676. * Make Ethernet autonegotiation on INCA-IP work for all clock rates;
  677. allow selection of clock frequency as "make" target
  678. * Implement memory autosizing code for IceCube boards
  679. * Configure network port on INCA-IP for autonegotiation
  680. * Fix overflow problem in network timeout code
  681. * Patch by Richard Woodruff, 8 Aug 2003:
  682. Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
  683. ======================================================================
  684. Changes for U-Boot 0.4.5:
  685. ======================================================================
  686. * Update for TQM board defaults:
  687. disable clocks_in_mhz, enable boot count limit
  688. * Removed tools/gdb from "make all" target. Added make target "gdbtools"
  689. in toplevel directory instead. Removed astest.c from tools/gdb because
  690. it is no longer relevant.
  691. * Fix PCI support for MPC5200 / IceCube Board
  692. * Map ISP1362 USB OTG controller for NSCU board
  693. * Patch by Brad Parker, 02 Aug 2003:
  694. fix sc520_cdp problems
  695. * Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
  696. * Allow erase command to cross flash bank boundaries
  697. * Patch by Scott McNutt, 21 Jul 2003:
  698. Add support for LynuxWorks Kernel Downloadable Images (KDIs).
  699. Both LynxOS and BlueCat linux KDIs are supported.
  700. * Patch by Richard Woodruff, 25 Jul 2003:
  701. use more reliable reset for OMAP/925T
  702. * Patch by Nye Liu, 25 Jul 2003:
  703. fix typo in mpc8xx.h
  704. * Patch by Richard Woodruff, 24 Jul 2003:
  705. Fixes for cmd_nand.c:
  706. - Fixed null dereferece which could result in incorrect ECC values.
  707. - Added support for devices with no Ready/Busy signal hooked up.
  708. - Added OMAP1510 read/write protect handling.
  709. - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
  710. for non-JFFS2.
  711. - Switched default ECC to be JFFS2.
  712. * Allow crc32 to be used at address 0x000
  713. * Provide consistent interface to standalone applications to access
  714. the 'global_data' structure
  715. Provide a doc/README.standalone more useful to users/developers.
  716. * Make IceCube MGT5100 FEC driver work
  717. * Implement new mechanism to export U-Boot's functions to standalone
  718. applications: instead of using (PPC-specific) system calls we now
  719. use a jump table; please see doc/README.standalone for details
  720. * Patch by Dave Westwood, 24 Jul 2003:
  721. added support for Unity OS (a proprietary OS)
  722. * Patch by Detlev Zundel, 23 Jul 2003:
  723. add "imls" command to print flash table of contents
  724. * Fix cold boot detection for log buffer reset
  725. * Return error for invalid length specifiers with "cp.X" etc.
  726. * Fix startup problem on MIPS
  727. * Allow for CONFIG_SPLASH_SCREEN even when no explicit
  728. bitmap support is configured
  729. * Patch by Bill Hargen, 18 Jul 2003:
  730. - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
  731. * Patch by Denis Peter, 18 Jul 2003:
  732. - fix memory configuration for MIP405T
  733. - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
  734. * Cleanup of TQM82xx configurations; use "official" board types
  735. to make selection easier.
  736. * Patch by Martin Krause, 17 Jul 2003:
  737. add delay to get I2C working with "imm" command and s3c24x0_i2c.c
  738. * Patch by Richard Woodruff, 17 July 03:
  739. - Fixed bug in OMAP1510 baud rate divisor settings.
  740. * Patch by Nye Liu, 16 July 2003:
  741. MPC860FADS fixes:
  742. - add MPC86xADS support (uses MPC86xADS.h)
  743. - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
  744. o PLPRCR changes
  745. o BRG changes (EXTAL/XTAL restricted to 10MHz)
  746. o don't trust gclk() software measurement by default, depend on
  747. CONFIG_8xx_GCLK_FREQ
  748. - add DRAM SIMM not installed detection
  749. - use more "correct" SDRAM initialization sequence
  750. - allow different SDRAM sizes (8xxADS has 8M)
  751. - default DER is 0
  752. - remove unused MAMR defines from FADS860T.h (all done in fads.c)
  753. - rename MAMR/MBMR defines to be more consistent. Should eventually
  754. be merged into MxMR to better reflect the PowerQUICC datasheet.
  755. * Patch by Yuli Barcohen, 16 Jul 2003:
  756. support new Motorola PQ2FADS-ZU evaluation board which replaced
  757. MPC8260ADS and MPC8266ADS
  758. ======================================================================
  759. Changes for U-Boot 0.4.4:
  760. ======================================================================
  761. * Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
  762. * Add support for MGT5100 and MPC5200 processors
  763. * Patch by Lutz Dennig, 15 Jul 2003:
  764. update for R360MPI board
  765. ======================================================================
  766. Changes for U-Boot 0.4.3:
  767. ======================================================================
  768. * Patches by Kshitij, 04 Jul 2003
  769. - added support for arm925t cpu core
  770. - added support for TI OMAP 1510 Innovator Board
  771. * Patches by Martin Krause, 14 Jul 2003:
  772. - add I2C support for s3c2400 systems (trab board)
  773. - (re-) add "ping" to command table
  774. * Fix handling of "slow" POST routines
  775. * Patches by Yuli Barcohen, 13 Jul 2003:
  776. - Correct flash and JFFS2 support for MPC8260ADS
  777. - fix PVR values and clock generation for PowerQUICC II family
  778. (8270/8275/8280)
  779. * Patch by Bernhard Kuhn, 08 Jul 2003:
  780. - add support for M68K targets
  781. * Patch by Ken Chou, 3 Jul:
  782. - Fix PCI config table for A3000
  783. - Fix iobase for natsemi.c
  784. (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
  785. * Allow to enable "slow" POST routines by key press on power-on
  786. * Fix temperature dependend switching of LCD backlight on LWMON
  787. * Tweak output format for LWMON
  788. * Patch by Stefan Roese, 11 Jul 2003:
  789. - Fix bug in CONFIG_VERSION_VARIABLE.
  790. - AR405 config updated.
  791. - OCRTC/ORSG: bsp command added.
  792. - ASH405 bsp update.
  793. ======================================================================
  794. Changes for U-Boot 0.4.2:
  795. ======================================================================
  796. * Add support for NSCU board
  797. * Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
  798. * Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
  799. mirror bit flash on TQM8xxM modules
  800. * Patch by Kenneth Johansson, 30 Jun 2003:
  801. get rid of MK_CMD_ENTRY macro; update doc/README.command
  802. * Patch by Seb James, 30 Jun 2003:
  803. Improve documentation of I2C configuration in README
  804. * Fix problems with previous log buffer "fixes"
  805. * Fix minor help text issues
  806. * "log append" did not append a newline
  807. ======================================================================
  808. Changes for U-Boot 0.4.1:
  809. ======================================================================
  810. * Fix some missing commands, cleanup header files
  811. (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
  812. * Rewrite command lookup and help command (fix problems with bubble
  813. sort when sorting command name list). Minor cleanup here and there.
  814. * Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
  815. - Allow to call sysmon function interactively
  816. - PIC on LWMON board needs delay after power-on
  817. - Add missing RSR definitions for MPC8xx
  818. - Improve log buffer handling: guarantee clean reset after power-on
  819. - Add support for EXBITGEN board (aka "genie")
  820. - Add support for SL8245 board
  821. * Code cleanup:
  822. - remove trailing white space, trailing empty lines, C++ comments, etc.
  823. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
  824. * Patches by Kenneth Johansson, 25 Jun 2003:
  825. - major rework of command structure
  826. (work done mostly by Michal Cendrowski and Joakim Kristiansen)
  827. ======================================================================
  828. Changes for U-Boot 0.4.0:
  829. ======================================================================
  830. * Patches by Robert Schwebel, 26 Jun 2003:
  831. - csb226 configuration updated
  832. - credits for logodl port updated
  833. - innokom configuration updated
  834. - logodl tree update, still with coding style inconsistencies
  835. - added OCM for ppc405 warning to README
  836. * Patch by Pantelis Antoniou, 25 Jun 2003:
  837. update NetVia with V2 board support
  838. * Header file cleanup for ARM
  839. * Patch by Murray Jensen, 24 Jun 2003:
  840. - make sure to use only U-boot provided header files
  841. - fix problems with ".rodata.str1.4" section as used by GCC-3.x
  842. * Patch by Stefan Roese, 24 Jun 2003:
  843. - Update esd ASH405 board files.
  844. - Update esd DASA_SIM config file.
  845. - Add ping command to some esd boards.
  846. * Patch by Yuli Barcohen, 23 Jun 2003:
  847. Update for MPC8260ADS board
  848. * Patch by Murray Jensen, 23 Jun 2003:
  849. - cleanup of GCC 3.x compiler warnings
  850. * Patch by Rune Torgersen, 4 Jun 2003:
  851. add large memory support for MPC8266ADS board
  852. * Patch by Richard Woodruff, 19 June 03:
  853. - Enabled standard u-boot device abstraction for ARM
  854. - Enabled console device for ARM
  855. - Initilized bi_baudrate for ARM
  856. * Patch by Bill Hargen, 23 Apr 2003:
  857. fix byte order for 824x I2C addresses (write op)
  858. * Patch by Murray Jensen, 20 Jun 2003:
  859. - hymod update
  860. - cleanup (especially for gcc-3.x compilers)
  861. * Patch by Tom Guilliams, 20 Jun 2003:
  862. added CONFIG_750FX support for IBM 750FX processors
  863. * Patch by Devin Crumb, 02 Apr 2003:
  864. Fix clock divider rounding problem in drivers/serial.c
  865. * Patch by Richard Woodruff, 19 June 03:
  866. - Fixed smc91c111 driver to sync with the u-boot environment
  867. (driver/smc91c111.c).
  868. - Added eth_init error return check in NetLoop (net/net.c).
  869. * Patch by Ken Chou, 19 June 2003:
  870. Added support for A3000 SBC board (Artis Microsystems Inc.)
  871. * Patches by Murray Jensen, 17 Jun 2003:
  872. - Hymod board database mods: add "who" field and new xilinx chip types
  873. - provide new "init_cmd_timeout()" function so code external to
  874. "common/main.c" can use the "reset_cmd_timeout()" function before
  875. entering the main loop
  876. - add DTT support for adm1021 (new file dtt/adm1021.c; config
  877. slightly different. see include/configs/hymod.h for an example
  878. (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
  879. CFG_DTT_ADM1021 defined)
  880. - add new "eeprom_probe()" function which has similar args and
  881. behaves in a similar way to "eeprom_read()" etc.
  882. - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
  883. function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
  884. - gdbtools copyright update
  885. - ensure that set_msr() executes the "sync" and "isync" instructions
  886. after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
  887. - 8260 I/O ports fix: Open Drain should be set last when configuring
  888. - add SIU IRQ defines for 8260
  889. - allow LDSCRIPT override and OBJCFLAGS initialization: change to
  890. config.mk to allow board configurations to override the GNU
  891. linker script, selected via the LDSCRIPT, make variable, and to
  892. give an initial value to the OBJCFLAGS make variable
  893. - 8260 i2c enhancement:
  894. o correctly extends the timeout depending on the size of all
  895. queued messages for both transmit and receive
  896. o will not continue with receive if transmit times out
  897. o ensures that the error callback is done for all queued tx
  898. and rx messages
  899. o correctly detects both tx and rx timeouts, only delivers one to
  900. the callback, and does not overwrite an earlier error
  901. o logic in i2c_probe now correct
  902. - add "vprintf()" function so that "panic()" function can be
  903. technically correct
  904. - many Hymod board changes
  905. * Patches by Robert Schwebel, 14 Jun 2003:
  906. - add support for Logotronic DL datalogger board
  907. - cleanup serial line after kermit binary download
  908. - add debugX macro (debug level support)
  909. - update mach-types.h to latest arm.linux.org.uk master list.
  910. * Patches by David Müller, 12 Jun 2003:
  911. - rewrite of the S3C24X0 register definitions stuff
  912. - "driver" for the built-in S3C24X0 RTC
  913. * Patches by Yuli Barcohen, 12 Jun 2003:
  914. - Add MII support and Ethernet PHY initialization for MPC8260ADS board
  915. - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
  916. configuration word supplied by FPGA on some MPC8260ADS boards
  917. * Patch by Pantelis Antoniou, 10 Jun 2003:
  918. Unify status LED interface
  919. * Add support for DS12887 RTC; add RTC support for ATC board
  920. * Patch by Nicolas Lacressonniere, 11 Jun 2003:
  921. Modifications for Atmel AT91RM9200DK ARM920T based development kit
  922. - Add Atmel DataFlash support for reading and writing.
  923. - Add possibility to boot a Linux from DataFlash with BOOTM command.
  924. - Add Flash detection on Atmel AT91RM9200DK
  925. (between Atmel AT49BV1614 and AT49BV1614A flashes)
  926. - Replace old Ethernet PHY layer functions
  927. - Change link address
  928. * Patch by Frank Smith, 9 Jun 2003:
  929. use CRIT_EXCEPTION for machine check on 4xx
  930. * Patch by Detlev Zundel, 13 Jun 2003:
  931. added implementation of the "carinfo" command in cmd_immap.c
  932. * Fix CONFIG_NET_MULTI support in include/net.h
  933. * Patches by Kyle Harris, 13 Mar 2003:
  934. - Add FAT partition support
  935. - Add command support for FAT
  936. - Add command support for MMC
  937. ----
  938. - Add Intel PXA support for video
  939. - Add Intel PXA support for MMC
  940. ----
  941. - Enable MMC and FAT for lubbock board
  942. - Other misc changes for lubbock board
  943. * Patch by Robert Schwebel, April 02, 2003:
  944. fix for SMSC91111 driver
  945. * Patch by Vladimir Gurevich, 04 Jun 2003:
  946. make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
  947. * Patch by Stefan Roese, 05 Jun 2003:
  948. - PPC4xx: Fix bug for initial stack in data cache as pointed out by
  949. Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
  950. data cache can be used even if the chip select is in use.
  951. - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
  952. (see README for further description).
  953. - Changed config files of CONFIG_EEPRO100 boards to use the
  954. CFG_RX_ETH_BUFFER define.
  955. * Add support for RMU board
  956. * Add support for TQM862L at 100/50 MHz
  957. * Patch by Pantelis Antoniou, 02 Jun 2003:
  958. major reconstruction of networking code;
  959. add "ping" support (outgoing only!)
  960. * Patch by Denis Peter, 04 June 2003:
  961. add support for the MIP405T board
  962. * Patches by Udi Finkelstein, 2 June 2003:
  963. - Added support for custom keyboards, initialized by defining a
  964. board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
  965. - Added support for the RBC823 board.
  966. - cpu/mpc8xx/lcd.c now automatically calculates the
  967. Horizontal Pixel Count field.
  968. * Fix alignment problem in BOOTP (dhcp_leasetime option)
  969. [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
  970. * Patch by Mark Rakes, 14 May 2003:
  971. add support for Intel e1000 gig cards.
  972. * Patch by Nye Liu, 3 Jun 2003:
  973. fix critical typo in MAMR definition (include/mpc8xx.h)
  974. * Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
  975. * Patch by Klaus Heydeck, 2 Jun 2003
  976. Minor changes for KUP4K configuration
  977. * Patch by Marc Singer, 29 May 2003:
  978. Fixed rarp boot method for IA32 and other little-endian CPUs.
  979. * Patch by Marc Singer, 28 May 2003:
  980. Added port I/O commands.
  981. * Patch by Matthew McClintock, 28 May 2003
  982. - cpu/mpc824x/start.S: fix relocation code when booting from RAM
  983. - minor patches for utx8245
  984. * Patch by Daniel Engström, 28 May 2003:
  985. x86 update
  986. * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
  987. add nand flash support to SXNI855T configuration
  988. fix/extend nand flash support:
  989. - fix 'nand erase' command so does not erase bad blocks
  990. - fix 'nand write' command so does not write to bad blocks
  991. - fix nand_probe() so handles no flash detected properly
  992. - add doc/README.nand
  993. - add .jffs2 and .oob options to nand read/write
  994. - add 'nand bad' command to list bad blocks
  995. - add 'clean' option to 'nand erase' to write JFFS2 clean markers
  996. - make NAND read/write faster
  997. * Patch by Rune Torgersen, 23 May 2003:
  998. Update for MPC8266ADS board
  999. * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
  1000. instead CFG_MONITOR_LEN is now only used to determine _at_compile_
  1001. _time_ (!) if the environment is embedded within the U-Boot image,
  1002. or in a separate flash sector.
  1003. * Cleanup CFG_DER #defines in config files (wd maintained only)
  1004. * Fix data abort exception handling for arm920t CPU
  1005. * Fix alignment problems with flash driver for TRAB board
  1006. * Patch by Donald White, 21 May 2003:
  1007. fix calculation of base address in pci_hose_config_device()
  1008. * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
  1009. execute "cmd2", even if "cmd1" fails. Note that this is different
  1010. to "run var1 var2" where the contents of "var2" will NOT be
  1011. executed when a command in "var1" fails.
  1012. * Add zero-copy ramdisk support (requires corresponding kernel support!)
  1013. * Patch by Kyle Harris, 20 May 2003:
  1014. In preparation for an ixp port, rename cpu/xscale and arch-xscale
  1015. into cpu/pxa and arch-pxa.
  1016. * Patch by Stefan Roese, 23 May 2003:
  1017. - IBM PPC405EP port added.
  1018. - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
  1019. UART0) is used as default U-Boot console. PPC4xx only!
  1020. - esd ASH405 board added (PPC405EP based).
  1021. - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
  1022. - esd CPCI405AB board added.
  1023. - esd PMC405 board added.
  1024. - Update of some esd boards.
  1025. * Patch by Denis Peter, 19 Mai 2003:
  1026. add support for the MIP405-3 board
  1027. * Patch by Dave Ellis, 22 May 2003:
  1028. Fix problem with only partially cleared .bss segment
  1029. * Patch by Rune Torgersen, 12 May 2003:
  1030. get PCI to work on a MPC8266ADS board; incorporate change to
  1031. cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
  1032. * Patch by Nye Liu, 1 May 2003:
  1033. minor patches for the FADS8xx
  1034. * Patch by Thomas Schäfer, 28 Apr 2003:
  1035. Fix SPD handling for 256 ECC DIMM on Walnut
  1036. * Add support for arbitrary bitmaps for TRAB's VFD command;
  1037. allow to pass boot bitmap addresses in environment variables;
  1038. allow for zero boot delay
  1039. * Patch by Christian Geißinger, 19 May 2002:
  1040. On TRAB: wait until the dummy byte has been completely sent
  1041. * Patch by David Updegraff, 22 Apr 2003:
  1042. update for CrayL1 board
  1043. * Patch by Pantelis Antoniou, 21 Apr 2003:
  1044. add boot support for ARTOS (a proprietary OS)
  1045. * Patch by Steven Scholz, 11 Apr 2003:
  1046. Add support for RTC DS1338
  1047. * Patch by Rod Boyce, 24 Jan 2003:
  1048. Fix counting of extended partitions in diskboot command
  1049. * Patch by Christophe Lindheimer, 20 May 2003:
  1050. allow the use of CFG_LOADS when CFG_NO_FLASH is set
  1051. * Fix SDRAM timing on Purple board
  1052. * Add support for CompactFlash on ATC board
  1053. (includes support for Intel 82365 and compatible PC Card controllers,
  1054. and Yenta-compatible PCI-to-CardBus controllers)
  1055. * Patch by Mathijs Haarman, 08 May 2003:
  1056. Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
  1057. * Fix problem with usage of "true" (undefined in current versions of bfd.h)
  1058. * Add support for Promess ATC board
  1059. * Patch by Keith Outwater, 28 Apr 2003:
  1060. - Miscellaneous corrections and additions to GEN860T board specific code.
  1061. - Added GEN860_SC variant to GEN860T.
  1062. - Miscellaneous corrections to GEN860T documentation.
  1063. - Correct duplicate entry in U-Boot CREDITS file.
  1064. - Add GEN860T_SC entry in MAINTAINERS file.
  1065. - Update CREDITS file with GEN860T_SC info.
  1066. * Update Smiths Aerospace addresses in MAINTAINERS file
  1067. * Fix error handling in hush's version of "run" command
  1068. * LWMON extensions:
  1069. - Splashscreen support
  1070. - modem support
  1071. - sysmon support
  1072. - temperature dependend enabling of LCD
  1073. * Allow booting from old "PPCBoot" disk partitions
  1074. * Add support for TQM8255 Board / MPC8255 CPU
  1075. ======================================================================
  1076. Changes for U-Boot 0.3.1:
  1077. ======================================================================
  1078. * Make sure Block Lock Bits get cleared in R360MPI flash driver
  1079. * MPC823 LCD driver: Fill color map backwards, to allow for steady
  1080. display when Linux takes over
  1081. * Patch by Erwin Rol, 27 Feb 2003:
  1082. Add support for RTEMS (this time for real).
  1083. * Add support for "bmp info" and "bmp display" commands to load
  1084. bitmap images; this can be used (for example in a "preboot"
  1085. command) to display a splash screen very quickly after poweron.
  1086. * Add support for 133 MHz clock on INCA-IP board
  1087. * Patch by Lutz Dennig, 10 Apr 2003:
  1088. Update for R360MPI board
  1089. * Add new meaning to "autostart" environment variable:
  1090. If set to "no", a standalone image passed to the
  1091. "bootm" command will be copied to the load address
  1092. (and eventually uncompressed), but NOT be started.
  1093. This can be used to load and uncompress arbitrary
  1094. data.
  1095. * Patch by Stefan Roese, 10 Apr 2003:
  1096. Changed DHCP client to use IP address from server option field #54
  1097. from the OFFER packet in the server option field #54 in the REQUEST
  1098. packet. This fixes a problem using a Windows 2000 DHCP server,
  1099. where the DHCP-server is not the TFTP-server.
  1100. * Set max brightness for MN11236 displays on TRAB board
  1101. * Add support for TQM862L modules
  1102. ======================================================================
  1103. Changes for U-Boot 0.3.0:
  1104. ======================================================================
  1105. * Patch by Arun Dharankar, 4 Apr 2003:
  1106. Add IDMA example code (tested on 8260 only)
  1107. * Add support for Purple Board (MIPS64 5Kc)
  1108. * Add support for MIPS64 5Kc CPUs
  1109. * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
  1110. * Patch by Denis Peter, 04 Apr 2003:
  1111. - update MIP405-4 board
  1112. * Patch by Stefan Roese, 4 Apr 2003:
  1113. - U-Boot version environment variable "ver" added
  1114. (CONFIG_VERSION_VARIABLE).
  1115. - Changed PPC405GPr version from A to B.
  1116. - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
  1117. * Patches by Denis Peter, 03 April 2003:
  1118. - fix PCI IRQs on MPL boards
  1119. - fix two more un-relocated pointer problems
  1120. * Fix behaviour of "run" command:
  1121. - print error message iv variable does not exist
  1122. - terminate processing of arguments in case of error
  1123. * Patches by Peter Figuli, 10 Mar 2003
  1124. - Add support for BTUART on PXA platform
  1125. - Add support for WEP EP250 (PXA) board
  1126. * Fix flash problems on INCA-IP; add tool to allow bruning images to
  1127. flash using a BDI2000
  1128. * Implement fix for I2C Edge Conditions problem for all boards that
  1129. use the bit-banging driver (common/soft_i2c.c)
  1130. * Patch by Martin Winistoerfer, 23 Mar 2003
  1131. - Add port to MPC555/556 microcontrollers
  1132. - Add support for cmi customer board with
  1133. Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
  1134. * Patch by Rick Bronson, 28 Mar 2003:
  1135. - fix common/cmd_nand.c
  1136. * Patch by Arun Dharankar, 24 Mar 2003:
  1137. - add threads / scheduler example code
  1138. * Add patches by Robert Schwebel, 31 Mar 2003:
  1139. - add ctrl-c support for kermit download
  1140. - align bdinfo output on ARM
  1141. - csb226 board: bring in sync with innokom/memsetup.S
  1142. - csb226 board: fix MDREFR handling
  1143. - misc doc fixes / extensions
  1144. - innokom board: cleanup, MDREFR fix in memsetup.S, config update
  1145. - add BOOT_PROGRESS to armlinux.c
  1146. * Add CPU ID, version, and clock speed for INCA-IP
  1147. * Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
  1148. - fix SRAM and SDRAM memory sizing
  1149. - add status LED support
  1150. - add MAC address for second (SCC1) ethernet port
  1151. * Update default environment for TQM8260 board
  1152. * Patch by Rick Bronson, 16 Mar 2003:
  1153. - Add NAND flash support for reading, writing, and erasing NAND
  1154. flash (certain forms of which are called SmartMedia).
  1155. - Add support for Atmel AT91RM9200DK ARM920T based development kit.
  1156. * Patches by Robert Schwebel, 19 Mar 2003:
  1157. - use arm-linux-gcc as default compiler for ARM
  1158. - fix i2c fixup code
  1159. - fix missing baudrate setting
  1160. - added $loadaddr / CFG_LOAD_ADDR support to loadb
  1161. - moved "ignoring trailing characters" _before_ u-boot wants to
  1162. print out diagnostics messages; removes bogus characters at the
  1163. end of transmission
  1164. * Patch by John Zhan, 18 Mar 2003:
  1165. Add support for SinoVee Microsystems SC8xx boards
  1166. * Patch by Rolf Offermanns, 21 Mar 2003:
  1167. ported the dnp1110 related changes from the current armboot cvs to
  1168. current u-boot cvs. smc91111 does not work. problem marked in
  1169. smc91111.c, grep for "FIXME".
  1170. * Patch by Brian Auld, 25 Mar 2003:
  1171. Add support for STM flash chips on ebony board
  1172. * Add PCI support for MPC8250 Boards (PM825 module)
  1173. * Patch by Stefan Roese, 25 Mar 2003:
  1174. - PCI405 update.
  1175. * Patch by Stefan Roese, 20 Mar 2003:
  1176. - CPCI4052 update (support for revision 3).
  1177. - Set edge conditioning circuitry on PPC405GPr for compatibility
  1178. to existing PPC405GP designs.
  1179. - Clip udiv to 5 bits on PPC405 (serial.c).
  1180. * Extend INCAIP board support:
  1181. - add automatic RAM size detection
  1182. - add "bdinfo" command
  1183. - pass flash address and size to Linux kernel
  1184. - switch to 150 MHz clock
  1185. * Avoid flicker on the TRAB's VFD by synchronizing the enable with
  1186. the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
  1187. boards, version 153 for Rev. 200 boards).
  1188. * Patch by Vladimir Gurevich, 12 Mar 2003:
  1189. Fix relocation problem of statically initialized string pointers
  1190. in common/cmd_pci.c
  1191. * Patch by Kai-Uwe Blöm, 12 Mar 2003:
  1192. Cleanup & bug fixes for JFFS2 code:
  1193. - the memory mangement was broken. It caused havoc on malloc by
  1194. writing beyond the block boundaries.
  1195. - the length calculation for files was wrong, sometimes resulting
  1196. in short file reads.
  1197. - data copying now optionally takes fragment version numbers into
  1198. account, to avoid copying from older data.
  1199. See doc/README.JFFS2 for details.
  1200. * Patch by Josef Wagner, 12 Mar 2003:
  1201. - 16/32 MB and 50/80 MHz support with auto-detection for IP860
  1202. - ETH05 and BEDBUG support for CU824
  1203. - added support for MicroSys CPC45
  1204. - new BOOTROM/FLASH0 and DOC base for PM826
  1205. * Patch by Robert Schwebel, 12 Mar 2003:
  1206. Fix the chpart command on innokom board
  1207. * Name cleanup:
  1208. mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
  1209. s/PPCBoot/U-Boot/ in some files
  1210. s/pImage/uImage/ in some files
  1211. * Patch by Detlev Zundel, 15 Jan 2003:
  1212. Fix '' command line quoting
  1213. * Patch by The LEOX team, 19 Jan 2003:
  1214. - add support for the ELPT860 board
  1215. - add support for Dallas ds164x RTC
  1216. * Patches by David Müller, 31 Jan 2003:
  1217. - minimal setup for CardBus bridges
  1218. - add EEPROM read/write support in the CS8900 driver
  1219. - add support for the builtin I2C controller in the Samsung s3c24x0 chips
  1220. - add support for MPL's VCMA9 (Samsung s3c2410 based) board
  1221. * Patch by Steven Scholz, 04 Feb 2003:
  1222. add support for RTC DS1307
  1223. * Patch by Reinhard Meyer, 5 Feb 2003:
  1224. fix PLPRCR/SCCR init sequence on 8xx to allow for
  1225. changes of EBDF by software
  1226. * Patch by Vladimir Gurevich, 07 Feb 2003:
  1227. "API-compatibility patch" for 4xx I2C driver
  1228. * TRAB fixes / extensions:
  1229. - Restore VFD brightness as saved in environment
  1230. - add support for Fujitsu flashes
  1231. - make sure both buzzers are turned off (drive low level)
  1232. * Patches by Robert Schwebel, 06 Mar 2003:
  1233. - fix bug in BOOTP code (must use NetCopyIP)
  1234. - update of CSB226 port
  1235. - clear BSS segment on XScale
  1236. - added support for i2c_init_board() function
  1237. - update to the Innokom plattform
  1238. * Extend support for redundand environments for configurations where
  1239. environment size < sector size
  1240. * Patch by Rune Torgersen, 13 Feb 2003:
  1241. Add support for Motorola MPC8266ADS board
  1242. * Patch by Kyle Harris, 19 Feb 2003:
  1243. patches for the Intel lubbock board:
  1244. memsetup.S - general cleanup (based on Robert's csb226 code)
  1245. flash.c - overhaul, actually works now
  1246. lubbock.c - fix init funcs to return proper value
  1247. * Patch by Kenneth Johansson, 26 Feb 2003:
  1248. - Fixed off by one in RFTA calculation.
  1249. - No need to abort when LDF is lower than we can program it's only
  1250. minimum timing so clamp it to what we can do.
  1251. - Takes function pointer to function for reading the spd_nvram. Usefull
  1252. for faking data or hardcode a module without the nvram.
  1253. - fix other user for above change
  1254. - fix some comments.
  1255. * Patches by Brian Waite, 26 Feb 2003:
  1256. - fix port for evb64260 board
  1257. - fix PCI for evb64260 board
  1258. - fix PCI scan
  1259. * Patch by Reinhard Meyer, 1 Mar 2003:
  1260. Add support for EMK TOP860 Module
  1261. * Patch by Yuli Barcohen, 02 Mar 2003:
  1262. Add SPD EEPROM support for MPC8260ADS board
  1263. * Patch by Robert Schwebel, 21 Jan 2003:
  1264. - Add support for Innokom board
  1265. - Don't complain if "install" fails
  1266. - README cleanup (remove duplicated lines)
  1267. - Update PXA header files
  1268. * Add documentation for existing POST code (doc/README.POST)
  1269. * Patch by Laudney Ren, 15 Jan 2003:
  1270. Fix handling of redundand environment in "tools/envcrc.c"
  1271. * Patch by Detlev Zundel, 28 Feb 2003:
  1272. Add bedbug support for 824x systems
  1273. * Add support for 16 MB flash configuration of TRAB board
  1274. * Patch by Erwin Rol, 27 Feb 2003:
  1275. Add support for RTEMS
  1276. * Add image information to README
  1277. * Patch by Stefan Roese, 18 Feb 2003:
  1278. CPCIISER4 configuration updated.
  1279. * Patch by Stefan Roese, 17 Feb 2003:
  1280. Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
  1281. * Patch by Stefan Roese, 13 Feb 2003:
  1282. Add "pcidelay" environment variable (in ms, enabled via
  1283. CONFIG_PCI_BOOTDELAY).
  1284. PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
  1285. RST# to respond to configuration cycles (33MHz -> 1s).
  1286. * Fix dual PCMCIA slot support (when running with just one
  1287. slot populated)
  1288. * Add VFD type detection to trab board
  1289. * extend drivers/cs8900.c driver to synchronize ethaddr environment
  1290. variable with value in the EEPROM
  1291. * Patch by Stefan Roese, 10 Feb 2003:
  1292. Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
  1293. * Add support for MIPS32 4Kc CPUs
  1294. * Add support for INCA-IP Board
  1295. ======================================================================
  1296. Changes for U-Boot 0.2.2:
  1297. ======================================================================
  1298. * Add dual ethernet support on PM826
  1299. * Add support for LXT971 PHY on PM826
  1300. * Patch by Tord Andersson, 16 Jan 2003:
  1301. Fix flash sector count for TQM8xxL
  1302. * Fix I2C EEPROM problem on ICU862 board (would only write the first
  1303. 16 bytes out of each 32 byte block)
  1304. ======================================================================
  1305. Changes for U-Boot 0.2.1:
  1306. ======================================================================
  1307. * Add support for V37 board
  1308. (patch by Jón Benediktsson, 11 Dec 2002)
  1309. * Update baudrate in bd_info when it gets changed
  1310. * Add watchdog trigger points while waiting for serial port
  1311. (so far only 8xx -- needed on LWMON with 100ms watchdog)
  1312. * Improve command line tool to access the U-Boot's environment
  1313. (figuration of the utility, using a config file)
  1314. * Add single quote support for (old) command line parser
  1315. * Switch LWMON board default config from FRAM to EEPROM;
  1316. in POST, EEPROM shows up on 8 addresses
  1317. ======================================================================
  1318. Changes for U-Boot 0.2.0:
  1319. ======================================================================
  1320. * Use 1-byte-read instead of -write for iprobe() function
  1321. Add i2c commands to PM826 config
  1322. * extend I2C POST code: check for list on known addresses
  1323. * Improve log buffer code; use "loglevel" to decide which messages
  1324. to log on the console, too (like in Linux); get rid of "logstart"
  1325. * Add command line tool to access the U-Boot's environment
  1326. (board-specific for TRAB now, to be fixed later)
  1327. * Patch by Hans-Joerg Frieden, 06 Dec 2002
  1328. Fix misc problems with AmigaOne support
  1329. * Patch by Chris Hallinan, 3 Dec 2002:
  1330. minor cleanup to the MPC8245 EPIC driver
  1331. * Patch by Pierre Aubert , 28 Nov 2002
  1332. Add support for external (SIU) interrupts on MPC8xx
  1333. * Patch by Pierre Aubert , 28 Nov 2002
  1334. Fix nested syscalls bug in standalone applications
  1335. * Patch by David Müller, 27 Nov 2002:
  1336. fix output of "pciinfo" command for CardBus bridge devices.
  1337. * Fix bug in TQM8260 board detection - boards got stuck when board ID
  1338. was not readable
  1339. * Add LED indication for IDE activity on KUP4K board
  1340. * Fix startup problems with VFD display on TRAB
  1341. * Patch by Pierre Aubert, 20 Nov 2002
  1342. Add driver for Epson SED13806 graphic controller.
  1343. Add support for BMP logos in cfb_console driver.
  1344. * Added support for both PCMCIA slots (at the same time!) on MPC8xx
  1345. * Patch by Rod Boyce, 21 Nov 2002:
  1346. fix PCMCIA on MBX8xx board
  1347. * Patch by Pierre Aubert , 21 Nov 2002
  1348. Add CFG_CPM_POST_WORD_ADDR to make the offset of the
  1349. bootmode word in DPRAM configurable
  1350. * Patch by Daniel Engström, 18 Nov 2002:
  1351. Fixes for x86 port (mostly strings issues)
  1352. * Patch by Ken Chou, 18 Nov 2002:
  1353. Fix for natsemi NIC cards (DP83815)
  1354. * Patch by Pierre Aubert, 19 Nov 2002:
  1355. fix a bug for the MII configuration, and some warnings
  1356. * Patch by Thomas Frieden, 13 Nov 2002:
  1357. Add code for AmigaOne board
  1358. (preliminary merge to U-Boot, still WIP)
  1359. * Patch by Jon Diekema, 12 Nov 2002:
  1360. - Adding URL for IEEE OUI lookup
  1361. - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
  1362. being defined.
  1363. - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
  1364. root-on-nfs macros are designed to switch how the default boot
  1365. method gets defined.
  1366. * Patch by Daniel Engström, 13 Nov 2002:
  1367. Add support for i386 architecture and AMD SC520 board
  1368. * Patch by Pierre Aubert, 12 Nov 2002:
  1369. Add support for DOS filesystem and booting from DOS floppy disk
  1370. * Patch by Jim Sandoz, 07 Nov 2002:
  1371. Increase number of network RX buffers (PKTBUFSRX in
  1372. "include/net.h") for EEPRO100 based boards (especially SP8240)
  1373. which showed "Receiver is not ready" errors when U-Boot was
  1374. processing the receive buffers slower than the network controller
  1375. was filling them.
  1376. * Patch by Andreas Oberritter, 09 Nov 2002:
  1377. Change behaviour of NetLoop(): return -1 for errors, filesize
  1378. otherwise; return code 0 is valid an means no file loaded - in this
  1379. case the environment still gets updated!
  1380. * Patches by Jon Diekema, 9 Nov 2002:
  1381. - improve ADC/DAC clocking on the SACSng board to align
  1382. the failing edges of LRCLK and SCLK
  1383. - sbc8260 configuration tweaks
  1384. - add status LED support for 82xx systems
  1385. - wire sspi/sspo commands into command handler; improved error
  1386. handlering
  1387. - add timestamp support and alternate memory test to the
  1388. SACSng configuration
  1389. * Patch by Vince Husovsky, 7 Nov 2002:
  1390. Add "-n" to linker options to get rid of "Not enough room for
  1391. program headers" problem
  1392. * Patch by David Müller, 05 Nov 2002
  1393. Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
  1394. so we can use an already existing name
  1395. * Patch by Pierre Aubert, 05 Nov 2002
  1396. Hardware relatied improvments in FDC boot code
  1397. * Patch by Holger Schurig, 5 Nov 2002:
  1398. Make the PXA really change it's frequency
  1399. * Patch by Pierre Aubert, 05 Nov 2002
  1400. Add support for slave serial Spartan 2 FPGAs
  1401. * Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
  1402. drivers
  1403. * Add support for log buffer which can be passed to Linux kernel's
  1404. syslog mechanism; used especially for POST results.
  1405. * Patch by Klaus Heydeck, 31 Oct 2002:
  1406. Add initial support for kup4k board
  1407. * Patch by Robert Schwebel, 04 Nov 2002:
  1408. - use watchdog to reset PXA250 systems
  1409. - added progress callbacks to (some of the) ARM code
  1410. - update for Cogent CSB226 board
  1411. * Add support for FPS860 board
  1412. * Patch by Guillaume Alexandre,, 04 Nov 2002:
  1413. Improve PCI access on 32-bits Compact PCI bus
  1414. * Fix mdelay() on TRAB - this was still the debugging version with
  1415. seconds instead of ms.
  1416. * Patch by Robert Schwebel, 1 Nov 2002:
  1417. XScale related cleanup (affects all ARM boards)
  1418. * Cleanup of names and README.
  1419. ======================================================================
  1420. Notes for U-Boot 0.1.0:
  1421. ======================================================================
  1422. This is the initial version of "Das U-Boot", the Universal Boot Loader.
  1423. It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
  1424. For information about the history of the project please see the
  1425. PPCBoot project page at http://sourceforge.net/projects/ppcboot
  1426. ======================================================================