| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667 |
- Freescale MPC8610HPCD board
- ===========================
- Building U-Boot
- ---------------
- $ make MPC8610HPCD_config
- Configuring for MPC8610HPCD board...
- $ make
- Flashing U-Boot
- ---------------
- The flash is 128M starting at 0xF800_0000.
- The alternate image is at 0xFBF0_0000
- The boot image is at 0xFFF0_0000.
- To Flash U-Boot into the booting bank:
- tftp 1000000 u-boot.bin
- protect off all
- erase fff00000 +$filesize
- cp.b 1000000 fff00000 $filesize
- To Flash U-boot into the alternate bank
- tftp 1000000 u-boot.bin
- erase fbf00000 +$filesize
- cp.b 1000000 fbf00000 $filesize
- pixis_reset command
- -------------------
- A new command, "pixis_reset", is introduced to reset mpc8610hpcd board
- using the FPGA sequencer. When the board restarts, it has the option
- of using either the current or alternate flash bank as the boot
- image, with or without the watchdog timer enabled, and finally with
- or without frequency changes.
- Usage is;
- pixis_reset
- pixis_reset altbank
- pixis_reset altbank wd
- pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
- pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
- Examples;
- /* reset to current bank, like "reset" command */
- pixis_reset
- /* reset board but use the to alternate flash bank */
- pixis_reset altbank
- /* reset board, use alternate flash bank with watchdog timer enabled*/
- pixis_reset altbank wd
- /* reset board to alternate bank with frequency changed.
- * 40 is SYSCLK, 2.5 is COREPLL ratio, 10 is MPXPLL ratio
- */
- pixis-reset altbank cf 40 2.5 10
|
