| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528252925302531253225332534253525362537253825392540254125422543254425452546254725482549255025512552255325542555255625572558255925602561256225632564256525662567256825692570257125722573257425752576257725782579258025812582258325842585258625872588258925902591259225932594259525962597259825992600260126022603260426052606260726082609261026112612261326142615261626172618261926202621262226232624262526262627262826292630263126322633263426352636263726382639264026412642264326442645264626472648264926502651265226532654265526562657265826592660266126622663266426652666266726682669267026712672267326742675267626772678267926802681268226832684268526862687268826892690269126922693269426952696269726982699270027012702270327042705270627072708270927102711271227132714271527162717271827192720272127222723272427252726272727282729273027312732273327342735273627372738273927402741274227432744274527462747274827492750275127522753275427552756275727582759276027612762276327642765276627672768276927702771277227732774277527762777277827792780278127822783278427852786278727882789279027912792279327942795279627972798279928002801280228032804280528062807280828092810281128122813281428152816281728182819282028212822282328242825282628272828282928302831283228332834283528362837283828392840284128422843284428452846284728482849285028512852285328542855285628572858285928602861286228632864286528662867286828692870287128722873287428752876287728782879288028812882288328842885288628872888288928902891289228932894289528962897289828992900290129022903290429052906290729082909291029112912291329142915291629172918291929202921292229232924292529262927292829292930293129322933293429352936293729382939294029412942294329442945294629472948294929502951295229532954295529562957295829592960296129622963296429652966296729682969297029712972297329742975297629772978297929802981298229832984298529862987298829892990299129922993299429952996299729982999300030013002300330043005300630073008300930103011301230133014301530163017301830193020302130223023302430253026302730283029303030313032303330343035303630373038303930403041304230433044304530463047304830493050305130523053305430553056305730583059306030613062306330643065306630673068306930703071307230733074307530763077307830793080308130823083308430853086308730883089309030913092309330943095309630973098309931003101310231033104310531063107310831093110311131123113311431153116311731183119312031213122312331243125312631273128312931303131313231333134313531363137313831393140314131423143314431453146314731483149315031513152315331543155315631573158315931603161316231633164316531663167316831693170317131723173317431753176317731783179318031813182318331843185318631873188318931903191319231933194319531963197319831993200320132023203320432053206320732083209321032113212321332143215321632173218321932203221322232233224322532263227322832293230323132323233323432353236323732383239324032413242324332443245324632473248324932503251325232533254325532563257325832593260326132623263326432653266326732683269327032713272327332743275327632773278327932803281328232833284328532863287328832893290329132923293329432953296329732983299330033013302330333043305330633073308330933103311331233133314331533163317331833193320332133223323332433253326332733283329333033313332333333343335333633373338333933403341334233433344334533463347334833493350335133523353335433553356335733583359336033613362336333643365336633673368336933703371337233733374337533763377337833793380338133823383338433853386338733883389339033913392339333943395339633973398339934003401340234033404340534063407340834093410341134123413341434153416341734183419342034213422342334243425342634273428342934303431343234333434343534363437343834393440344134423443344434453446344734483449345034513452345334543455345634573458345934603461346234633464346534663467346834693470347134723473347434753476347734783479348034813482348334843485348634873488348934903491349234933494349534963497349834993500350135023503350435053506350735083509351035113512351335143515351635173518351935203521352235233524352535263527352835293530353135323533353435353536353735383539354035413542354335443545354635473548354935503551355235533554355535563557355835593560356135623563356435653566356735683569357035713572357335743575357635773578357935803581358235833584358535863587358835893590359135923593359435953596359735983599360036013602360336043605360636073608360936103611361236133614361536163617361836193620362136223623362436253626362736283629363036313632363336343635363636373638363936403641364236433644364536463647364836493650365136523653365436553656365736583659366036613662366336643665366636673668366936703671367236733674367536763677367836793680368136823683368436853686368736883689369036913692369336943695369636973698369937003701370237033704370537063707370837093710371137123713371437153716371737183719372037213722372337243725372637273728372937303731373237333734373537363737373837393740374137423743374437453746374737483749375037513752375337543755375637573758375937603761376237633764376537663767376837693770377137723773377437753776377737783779378037813782378337843785378637873788378937903791379237933794379537963797379837993800380138023803380438053806380738083809381038113812381338143815381638173818381938203821382238233824382538263827382838293830383138323833383438353836383738383839384038413842384338443845384638473848384938503851385238533854385538563857385838593860386138623863386438653866386738683869387038713872387338743875387638773878387938803881388238833884388538863887388838893890389138923893389438953896389738983899390039013902390339043905390639073908390939103911391239133914391539163917391839193920392139223923392439253926392739283929393039313932393339343935393639373938393939403941394239433944394539463947394839493950395139523953395439553956395739583959396039613962396339643965396639673968396939703971397239733974397539763977397839793980398139823983398439853986398739883989399039913992399339943995399639973998399940004001400240034004400540064007400840094010401140124013401440154016401740184019402040214022402340244025402640274028402940304031403240334034403540364037403840394040404140424043404440454046404740484049405040514052405340544055405640574058405940604061406240634064406540664067406840694070407140724073407440754076407740784079408040814082408340844085408640874088408940904091409240934094409540964097409840994100410141024103410441054106410741084109411041114112411341144115411641174118411941204121412241234124412541264127412841294130413141324133413441354136413741384139414041414142414341444145414641474148414941504151415241534154415541564157415841594160416141624163416441654166416741684169417041714172417341744175417641774178417941804181418241834184418541864187418841894190419141924193419441954196419741984199420042014202420342044205420642074208420942104211421242134214421542164217421842194220422142224223422442254226422742284229423042314232423342344235423642374238423942404241424242434244424542464247424842494250425142524253425442554256425742584259426042614262426342644265426642674268426942704271427242734274427542764277427842794280428142824283428442854286428742884289429042914292429342944295429642974298429943004301430243034304430543064307430843094310431143124313431443154316431743184319432043214322432343244325432643274328432943304331433243334334433543364337433843394340434143424343434443454346434743484349435043514352435343544355435643574358435943604361436243634364436543664367436843694370437143724373437443754376437743784379438043814382438343844385438643874388438943904391439243934394439543964397439843994400440144024403440444054406440744084409441044114412441344144415441644174418441944204421442244234424442544264427442844294430443144324433443444354436443744384439444044414442444344444445444644474448444944504451445244534454445544564457445844594460446144624463446444654466446744684469447044714472447344744475447644774478447944804481448244834484448544864487448844894490449144924493449444954496449744984499450045014502450345044505450645074508450945104511451245134514451545164517451845194520452145224523452445254526452745284529453045314532453345344535453645374538453945404541454245434544454545464547454845494550455145524553455445554556455745584559456045614562456345644565456645674568456945704571457245734574457545764577457845794580458145824583458445854586458745884589459045914592459345944595459645974598459946004601460246034604460546064607460846094610461146124613461446154616461746184619462046214622462346244625462646274628462946304631463246334634463546364637463846394640464146424643464446454646464746484649465046514652465346544655465646574658465946604661466246634664466546664667466846694670467146724673467446754676467746784679468046814682468346844685468646874688468946904691469246934694469546964697469846994700470147024703470447054706470747084709471047114712471347144715471647174718471947204721472247234724472547264727472847294730473147324733473447354736473747384739474047414742474347444745474647474748474947504751475247534754475547564757475847594760476147624763476447654766476747684769477047714772477347744775477647774778477947804781478247834784478547864787478847894790479147924793479447954796479747984799480048014802480348044805480648074808480948104811481248134814481548164817481848194820482148224823482448254826482748284829483048314832483348344835483648374838483948404841484248434844484548464847484848494850485148524853485448554856485748584859486048614862486348644865486648674868486948704871487248734874487548764877487848794880488148824883488448854886488748884889489048914892489348944895489648974898489949004901490249034904490549064907490849094910491149124913491449154916491749184919492049214922492349244925492649274928492949304931493249334934493549364937493849394940494149424943494449454946494749484949495049514952495349544955495649574958495949604961496249634964496549664967496849694970497149724973497449754976497749784979498049814982498349844985498649874988498949904991499249934994499549964997499849995000500150025003500450055006500750085009501050115012501350145015501650175018501950205021502250235024502550265027502850295030503150325033503450355036503750385039504050415042504350445045504650475048504950505051505250535054505550565057505850595060506150625063506450655066506750685069507050715072507350745075507650775078507950805081508250835084508550865087508850895090509150925093509450955096509750985099510051015102510351045105510651075108510951105111511251135114511551165117511851195120512151225123512451255126512751285129513051315132513351345135513651375138513951405141514251435144514551465147514851495150515151525153515451555156515751585159516051615162516351645165516651675168516951705171517251735174517551765177517851795180518151825183518451855186518751885189519051915192519351945195519651975198519952005201520252035204520552065207520852095210521152125213521452155216521752185219522052215222522352245225522652275228522952305231523252335234523552365237523852395240524152425243524452455246524752485249525052515252525352545255525652575258525952605261526252635264526552665267526852695270527152725273527452755276527752785279528052815282528352845285528652875288528952905291529252935294529552965297529852995300530153025303530453055306530753085309531053115312531353145315531653175318531953205321532253235324532553265327532853295330533153325333533453355336533753385339534053415342534353445345534653475348534953505351535253535354535553565357535853595360536153625363536453655366536753685369537053715372537353745375537653775378537953805381538253835384538553865387538853895390539153925393539453955396539753985399540054015402540354045405540654075408540954105411541254135414541554165417541854195420542154225423542454255426542754285429543054315432543354345435543654375438543954405441544254435444544554465447544854495450545154525453545454555456545754585459546054615462546354645465546654675468546954705471547254735474547554765477547854795480548154825483548454855486548754885489549054915492549354945495549654975498549955005501550255035504550555065507550855095510551155125513551455155516551755185519552055215522552355245525552655275528552955305531553255335534553555365537553855395540554155425543554455455546554755485549555055515552555355545555555655575558555955605561556255635564556555665567556855695570557155725573557455755576557755785579558055815582558355845585558655875588558955905591559255935594559555965597559855995600560156025603560456055606560756085609561056115612561356145615561656175618561956205621562256235624562556265627562856295630563156325633563456355636563756385639564056415642564356445645564656475648564956505651565256535654565556565657565856595660566156625663566456655666566756685669567056715672567356745675567656775678567956805681568256835684568556865687568856895690569156925693569456955696569756985699570057015702570357045705570657075708570957105711571257135714571557165717571857195720572157225723572457255726572757285729573057315732573357345735573657375738573957405741574257435744574557465747574857495750575157525753575457555756575757585759576057615762576357645765576657675768576957705771577257735774577557765777577857795780578157825783578457855786578757885789579057915792579357945795579657975798579958005801580258035804580558065807580858095810581158125813581458155816581758185819582058215822582358245825582658275828582958305831583258335834583558365837583858395840584158425843584458455846584758485849585058515852585358545855585658575858585958605861586258635864586558665867586858695870587158725873587458755876587758785879588058815882588358845885588658875888588958905891589258935894589558965897589858995900590159025903590459055906590759085909591059115912591359145915591659175918591959205921592259235924592559265927592859295930593159325933593459355936593759385939594059415942594359445945594659475948594959505951595259535954595559565957595859595960596159625963596459655966596759685969597059715972597359745975597659775978597959805981598259835984598559865987598859895990599159925993599459955996599759985999600060016002600360046005600660076008600960106011601260136014601560166017601860196020602160226023602460256026602760286029603060316032603360346035603660376038603960406041604260436044604560466047604860496050605160526053605460556056605760586059606060616062606360646065606660676068606960706071607260736074607560766077607860796080608160826083608460856086608760886089609060916092609360946095609660976098609961006101610261036104610561066107610861096110611161126113611461156116611761186119612061216122612361246125612661276128612961306131613261336134613561366137613861396140614161426143614461456146614761486149615061516152615361546155615661576158615961606161616261636164616561666167616861696170617161726173617461756176617761786179618061816182618361846185618661876188618961906191619261936194619561966197619861996200620162026203620462056206620762086209621062116212621362146215621662176218621962206221622262236224622562266227622862296230623162326233623462356236623762386239624062416242624362446245624662476248624962506251625262536254625562566257625862596260626162626263626462656266626762686269627062716272627362746275627662776278627962806281628262836284628562866287628862896290629162926293629462956296629762986299630063016302630363046305630663076308630963106311631263136314631563166317631863196320632163226323632463256326632763286329633063316332633363346335633663376338633963406341634263436344634563466347634863496350635163526353635463556356635763586359636063616362636363646365636663676368636963706371637263736374637563766377637863796380638163826383638463856386638763886389639063916392639363946395639663976398639964006401640264036404640564066407640864096410641164126413641464156416641764186419642064216422642364246425642664276428642964306431643264336434643564366437643864396440644164426443644464456446644764486449645064516452645364546455645664576458645964606461646264636464646564666467646864696470647164726473647464756476647764786479648064816482648364846485648664876488648964906491649264936494649564966497649864996500650165026503650465056506650765086509651065116512651365146515651665176518651965206521652265236524652565266527652865296530653165326533653465356536653765386539654065416542654365446545654665476548654965506551655265536554655565566557655865596560656165626563656465656566656765686569657065716572657365746575657665776578657965806581658265836584658565866587658865896590659165926593659465956596659765986599660066016602660366046605660666076608660966106611661266136614661566166617661866196620662166226623662466256626662766286629663066316632663366346635663666376638663966406641664266436644664566466647664866496650665166526653665466556656665766586659666066616662666366646665666666676668666966706671667266736674667566766677667866796680668166826683668466856686668766886689669066916692669366946695669666976698669967006701670267036704670567066707670867096710671167126713671467156716671767186719672067216722672367246725672667276728672967306731673267336734673567366737673867396740674167426743674467456746674767486749675067516752675367546755675667576758675967606761676267636764676567666767676867696770677167726773677467756776677767786779678067816782678367846785678667876788678967906791679267936794679567966797679867996800680168026803680468056806680768086809681068116812681368146815681668176818681968206821682268236824682568266827682868296830683168326833683468356836683768386839684068416842684368446845684668476848684968506851685268536854685568566857685868596860686168626863686468656866686768686869687068716872687368746875687668776878687968806881688268836884688568866887688868896890689168926893689468956896689768986899690069016902690369046905690669076908690969106911691269136914691569166917691869196920692169226923692469256926692769286929693069316932693369346935693669376938693969406941694269436944694569466947694869496950695169526953695469556956695769586959696069616962696369646965696669676968696969706971697269736974697569766977697869796980698169826983698469856986698769886989699069916992699369946995699669976998699970007001700270037004700570067007700870097010701170127013701470157016701770187019702070217022702370247025702670277028702970307031703270337034703570367037703870397040704170427043704470457046704770487049705070517052705370547055705670577058705970607061706270637064706570667067706870697070707170727073707470757076707770787079708070817082708370847085708670877088708970907091709270937094709570967097709870997100710171027103710471057106710771087109711071117112711371147115711671177118711971207121712271237124712571267127712871297130713171327133713471357136713771387139714071417142714371447145714671477148714971507151715271537154715571567157715871597160716171627163716471657166716771687169717071717172717371747175717671777178717971807181718271837184718571867187718871897190719171927193719471957196719771987199720072017202720372047205720672077208720972107211721272137214721572167217721872197220722172227223722472257226722772287229723072317232723372347235723672377238723972407241724272437244724572467247724872497250725172527253725472557256725772587259726072617262726372647265726672677268726972707271727272737274727572767277727872797280728172827283728472857286728772887289729072917292729372947295729672977298729973007301730273037304730573067307730873097310731173127313731473157316731773187319732073217322732373247325732673277328732973307331733273337334733573367337733873397340734173427343734473457346734773487349735073517352735373547355735673577358735973607361736273637364736573667367736873697370737173727373737473757376737773787379738073817382738373847385738673877388738973907391739273937394739573967397739873997400740174027403740474057406740774087409741074117412741374147415741674177418741974207421742274237424742574267427742874297430743174327433743474357436743774387439744074417442744374447445744674477448744974507451745274537454745574567457745874597460746174627463746474657466746774687469747074717472747374747475747674777478747974807481748274837484748574867487748874897490749174927493749474957496749774987499750075017502750375047505750675077508750975107511751275137514751575167517751875197520752175227523752475257526752775287529753075317532753375347535753675377538753975407541754275437544754575467547754875497550755175527553755475557556755775587559756075617562756375647565756675677568756975707571757275737574757575767577757875797580758175827583758475857586758775887589759075917592759375947595759675977598759976007601760276037604760576067607760876097610761176127613761476157616761776187619762076217622762376247625762676277628762976307631763276337634763576367637763876397640764176427643764476457646764776487649765076517652765376547655765676577658765976607661766276637664766576667667766876697670767176727673767476757676767776787679768076817682768376847685768676877688768976907691769276937694769576967697769876997700770177027703770477057706770777087709771077117712771377147715771677177718771977207721772277237724772577267727772877297730773177327733773477357736773777387739774077417742774377447745774677477748774977507751775277537754775577567757775877597760776177627763776477657766776777687769777077717772777377747775777677777778777977807781778277837784778577867787778877897790779177927793779477957796779777987799780078017802780378047805780678077808780978107811781278137814781578167817781878197820782178227823782478257826782778287829783078317832783378347835783678377838783978407841784278437844784578467847784878497850785178527853785478557856785778587859786078617862786378647865786678677868786978707871787278737874787578767877787878797880788178827883788478857886788778887889789078917892789378947895789678977898789979007901790279037904790579067907790879097910791179127913791479157916791779187919792079217922792379247925792679277928792979307931793279337934793579367937793879397940794179427943794479457946794779487949795079517952795379547955795679577958795979607961796279637964796579667967796879697970797179727973797479757976797779787979798079817982798379847985798679877988798979907991799279937994799579967997799879998000800180028003800480058006800780088009801080118012801380148015801680178018801980208021802280238024802580268027802880298030803180328033803480358036803780388039804080418042804380448045804680478048804980508051805280538054805580568057805880598060806180628063806480658066806780688069807080718072807380748075807680778078807980808081808280838084808580868087808880898090809180928093809480958096809780988099810081018102810381048105810681078108810981108111811281138114811581168117811881198120812181228123812481258126812781288129813081318132813381348135813681378138813981408141814281438144814581468147814881498150815181528153815481558156815781588159816081618162816381648165816681678168816981708171817281738174817581768177817881798180818181828183818481858186818781888189819081918192819381948195819681978198819982008201820282038204820582068207820882098210821182128213821482158216821782188219822082218222822382248225822682278228822982308231823282338234823582368237823882398240824182428243824482458246824782488249825082518252825382548255825682578258825982608261826282638264826582668267826882698270827182728273827482758276827782788279828082818282828382848285828682878288828982908291829282938294829582968297829882998300830183028303830483058306830783088309831083118312831383148315831683178318831983208321832283238324832583268327832883298330833183328333833483358336833783388339834083418342834383448345834683478348834983508351835283538354835583568357835883598360836183628363836483658366836783688369837083718372837383748375837683778378837983808381838283838384838583868387838883898390839183928393839483958396839783988399840084018402840384048405840684078408840984108411841284138414841584168417841884198420842184228423842484258426842784288429843084318432843384348435843684378438843984408441844284438444844584468447844884498450845184528453845484558456845784588459846084618462846384648465846684678468846984708471847284738474847584768477847884798480848184828483848484858486848784888489849084918492849384948495849684978498849985008501850285038504850585068507850885098510851185128513851485158516851785188519852085218522852385248525852685278528852985308531853285338534853585368537853885398540854185428543854485458546854785488549855085518552855385548555855685578558855985608561856285638564856585668567856885698570857185728573857485758576857785788579858085818582858385848585858685878588858985908591859285938594859585968597859885998600860186028603860486058606860786088609861086118612861386148615861686178618861986208621862286238624862586268627862886298630863186328633863486358636863786388639864086418642864386448645864686478648864986508651865286538654865586568657865886598660866186628663866486658666866786688669867086718672867386748675867686778678867986808681868286838684868586868687868886898690869186928693869486958696869786988699870087018702870387048705870687078708870987108711871287138714871587168717871887198720872187228723872487258726872787288729873087318732873387348735873687378738873987408741874287438744874587468747874887498750875187528753875487558756875787588759876087618762876387648765876687678768876987708771877287738774877587768777877887798780878187828783878487858786878787888789879087918792879387948795879687978798879988008801880288038804880588068807880888098810881188128813881488158816881788188819882088218822882388248825882688278828882988308831883288338834883588368837883888398840884188428843884488458846884788488849885088518852885388548855885688578858885988608861886288638864886588668867886888698870887188728873887488758876887788788879888088818882888388848885888688878888888988908891889288938894889588968897889888998900890189028903890489058906890789088909891089118912891389148915891689178918891989208921892289238924892589268927892889298930893189328933893489358936893789388939894089418942894389448945894689478948894989508951895289538954895589568957895889598960896189628963896489658966896789688969897089718972897389748975897689778978897989808981898289838984898589868987898889898990899189928993899489958996899789988999900090019002900390049005900690079008900990109011901290139014901590169017901890199020902190229023902490259026902790289029903090319032903390349035903690379038903990409041904290439044904590469047904890499050905190529053905490559056905790589059906090619062906390649065906690679068906990709071907290739074907590769077907890799080908190829083908490859086908790889089909090919092909390949095909690979098909991009101910291039104910591069107910891099110911191129113911491159116911791189119912091219122912391249125912691279128912991309131913291339134913591369137913891399140914191429143914491459146914791489149915091519152915391549155915691579158915991609161916291639164916591669167916891699170917191729173917491759176917791789179918091819182918391849185918691879188918991909191919291939194919591969197919891999200920192029203920492059206920792089209921092119212921392149215921692179218921992209221922292239224922592269227922892299230923192329233923492359236923792389239924092419242924392449245924692479248924992509251925292539254925592569257925892599260926192629263926492659266926792689269927092719272927392749275927692779278927992809281928292839284928592869287928892899290929192929293929492959296929792989299930093019302930393049305930693079308930993109311931293139314931593169317931893199320932193229323932493259326932793289329933093319332933393349335933693379338933993409341934293439344934593469347934893499350935193529353935493559356935793589359936093619362936393649365936693679368936993709371937293739374937593769377937893799380938193829383938493859386938793889389939093919392939393949395939693979398939994009401940294039404940594069407940894099410941194129413941494159416941794189419942094219422942394249425942694279428942994309431943294339434943594369437943894399440944194429443944494459446944794489449945094519452945394549455945694579458945994609461946294639464946594669467946894699470947194729473947494759476947794789479948094819482948394849485948694879488948994909491949294939494949594969497949894999500950195029503950495059506950795089509951095119512951395149515951695179518951995209521952295239524952595269527952895299530953195329533953495359536953795389539954095419542954395449545954695479548954995509551955295539554955595569557955895599560956195629563956495659566956795689569957095719572957395749575957695779578957995809581958295839584958595869587958895899590959195929593959495959596959795989599960096019602960396049605960696079608960996109611961296139614961596169617961896199620962196229623962496259626962796289629963096319632963396349635963696379638963996409641964296439644964596469647964896499650965196529653965496559656965796589659966096619662966396649665966696679668966996709671967296739674967596769677967896799680968196829683968496859686968796889689969096919692969396949695969696979698969997009701970297039704970597069707970897099710971197129713971497159716971797189719972097219722972397249725972697279728972997309731973297339734973597369737973897399740974197429743974497459746974797489749975097519752975397549755975697579758975997609761976297639764976597669767976897699770977197729773977497759776977797789779978097819782978397849785978697879788978997909791979297939794979597969797979897999800980198029803980498059806980798089809981098119812981398149815981698179818981998209821982298239824982598269827982898299830983198329833983498359836983798389839984098419842984398449845984698479848984998509851985298539854985598569857985898599860986198629863986498659866986798689869987098719872987398749875987698779878987998809881988298839884988598869887988898899890989198929893989498959896989798989899990099019902990399049905990699079908990999109911991299139914991599169917991899199920992199229923992499259926992799289929993099319932993399349935993699379938993999409941994299439944994599469947994899499950995199529953995499559956995799589959996099619962996399649965996699679968996999709971997299739974997599769977997899799980998199829983998499859986998799889989999099919992999399949995999699979998999910000100011000210003100041000510006100071000810009100101001110012100131001410015100161001710018100191002010021100221002310024100251002610027100281002910030100311003210033100341003510036100371003810039100401004110042100431004410045100461004710048100491005010051100521005310054100551005610057100581005910060100611006210063100641006510066100671006810069100701007110072100731007410075100761007710078100791008010081100821008310084100851008610087100881008910090100911009210093100941009510096100971009810099101001010110102101031010410105101061010710108101091011010111101121011310114101151011610117101181011910120101211012210123101241012510126101271012810129101301013110132101331013410135101361013710138101391014010141101421014310144101451014610147101481014910150101511015210153101541015510156101571015810159101601016110162101631016410165101661016710168101691017010171101721017310174101751017610177101781017910180101811018210183101841018510186101871018810189101901019110192101931019410195101961019710198101991020010201102021020310204102051020610207102081020910210102111021210213102141021510216102171021810219102201022110222102231022410225102261022710228102291023010231102321023310234102351023610237102381023910240102411024210243102441024510246102471024810249102501025110252102531025410255102561025710258102591026010261102621026310264102651026610267102681026910270102711027210273102741027510276102771027810279102801028110282102831028410285102861028710288102891029010291102921029310294102951029610297102981029910300103011030210303103041030510306103071030810309103101031110312103131031410315103161031710318103191032010321103221032310324103251032610327103281032910330103311033210333103341033510336103371033810339103401034110342103431034410345103461034710348103491035010351103521035310354103551035610357103581035910360103611036210363103641036510366103671036810369103701037110372103731037410375103761037710378103791038010381103821038310384103851038610387103881038910390103911039210393103941039510396103971039810399104001040110402104031040410405104061040710408104091041010411104121041310414104151041610417104181041910420104211042210423104241042510426104271042810429104301043110432104331043410435104361043710438104391044010441104421044310444104451044610447104481044910450104511045210453104541045510456104571045810459104601046110462104631046410465104661046710468104691047010471104721047310474104751047610477104781047910480104811048210483104841048510486104871048810489104901049110492104931049410495104961049710498104991050010501105021050310504105051050610507105081050910510105111051210513105141051510516105171051810519105201052110522105231052410525105261052710528105291053010531105321053310534105351053610537105381053910540105411054210543105441054510546105471054810549105501055110552105531055410555105561055710558105591056010561105621056310564105651056610567105681056910570105711057210573105741057510576105771057810579105801058110582105831058410585105861058710588105891059010591105921059310594105951059610597105981059910600106011060210603106041060510606106071060810609106101061110612106131061410615106161061710618106191062010621106221062310624106251062610627106281062910630106311063210633106341063510636106371063810639106401064110642106431064410645106461064710648106491065010651106521065310654106551065610657106581065910660106611066210663106641066510666106671066810669106701067110672106731067410675106761067710678106791068010681106821068310684106851068610687106881068910690106911069210693106941069510696106971069810699107001070110702107031070410705107061070710708107091071010711107121071310714107151071610717107181071910720107211072210723107241072510726107271072810729107301073110732107331073410735107361073710738107391074010741107421074310744107451074610747107481074910750107511075210753107541075510756107571075810759107601076110762107631076410765107661076710768107691077010771107721077310774107751077610777107781077910780107811078210783107841078510786107871078810789107901079110792107931079410795107961079710798107991080010801108021080310804108051080610807108081080910810108111081210813108141081510816108171081810819108201082110822108231082410825108261082710828108291083010831108321083310834108351083610837108381083910840108411084210843108441084510846108471084810849108501085110852108531085410855108561085710858108591086010861108621086310864108651086610867108681086910870108711087210873108741087510876108771087810879108801088110882108831088410885108861088710888108891089010891108921089310894108951089610897108981089910900109011090210903109041090510906109071090810909109101091110912109131091410915109161091710918109191092010921109221092310924109251092610927109281092910930109311093210933109341093510936109371093810939109401094110942109431094410945109461094710948109491095010951109521095310954109551095610957109581095910960109611096210963109641096510966109671096810969109701097110972109731097410975109761097710978109791098010981109821098310984109851098610987109881098910990109911099210993109941099510996109971099810999110001100111002110031100411005110061100711008110091101011011110121101311014110151101611017110181101911020110211102211023110241102511026110271102811029110301103111032110331103411035110361103711038110391104011041110421104311044110451104611047110481104911050110511105211053110541105511056110571105811059110601106111062110631106411065110661106711068110691107011071110721107311074110751107611077110781107911080110811108211083110841108511086110871108811089110901109111092110931109411095110961109711098110991110011101111021110311104111051110611107111081110911110111111111211113111141111511116111171111811119111201112111122111231112411125111261112711128111291113011131111321113311134111351113611137111381113911140111411114211143111441114511146111471114811149111501115111152111531115411155111561115711158111591116011161111621116311164111651116611167111681116911170111711117211173111741117511176111771117811179111801118111182111831118411185111861118711188111891119011191111921119311194111951119611197111981119911200112011120211203112041120511206112071120811209112101121111212112131121411215112161121711218112191122011221112221122311224112251122611227112281122911230112311123211233112341123511236112371123811239112401124111242112431124411245112461124711248112491125011251112521125311254112551125611257112581125911260112611126211263112641126511266112671126811269112701127111272112731127411275112761127711278112791128011281112821128311284112851128611287112881128911290112911129211293112941129511296112971129811299113001130111302113031130411305113061130711308113091131011311113121131311314113151131611317113181131911320113211132211323113241132511326113271132811329113301133111332113331133411335113361133711338113391134011341113421134311344113451134611347113481134911350113511135211353113541135511356113571135811359113601136111362113631136411365113661136711368113691137011371113721137311374113751137611377113781137911380113811138211383113841138511386113871138811389113901139111392113931139411395113961139711398113991140011401114021140311404114051140611407114081140911410114111141211413114141141511416114171141811419114201142111422114231142411425114261142711428114291143011431114321143311434114351143611437114381143911440114411144211443114441144511446114471144811449114501145111452114531145411455114561145711458114591146011461114621146311464114651146611467114681146911470114711147211473114741147511476114771147811479114801148111482114831148411485114861148711488114891149011491114921149311494114951149611497114981149911500115011150211503115041150511506115071150811509115101151111512115131151411515115161151711518115191152011521115221152311524115251152611527115281152911530115311153211533115341153511536115371153811539115401154111542115431154411545115461154711548115491155011551115521155311554115551155611557115581155911560115611156211563115641156511566115671156811569115701157111572115731157411575115761157711578115791158011581115821158311584115851158611587115881158911590115911159211593115941159511596115971159811599116001160111602116031160411605116061160711608116091161011611116121161311614116151161611617116181161911620116211162211623116241162511626116271162811629116301163111632116331163411635116361163711638116391164011641116421164311644116451164611647116481164911650116511165211653116541165511656116571165811659116601166111662116631166411665116661166711668116691167011671116721167311674116751167611677116781167911680116811168211683116841168511686116871168811689116901169111692116931169411695116961169711698116991170011701117021170311704117051170611707117081170911710117111171211713117141171511716117171171811719117201172111722117231172411725117261172711728117291173011731117321173311734117351173611737117381173911740117411174211743117441174511746117471174811749117501175111752117531175411755117561175711758117591176011761117621176311764117651176611767117681176911770117711177211773117741177511776117771177811779117801178111782117831178411785117861178711788117891179011791117921179311794117951179611797117981179911800118011180211803118041180511806118071180811809118101181111812118131181411815118161181711818118191182011821118221182311824118251182611827118281182911830118311183211833118341183511836118371183811839118401184111842118431184411845118461184711848118491185011851118521185311854118551185611857118581185911860118611186211863118641186511866118671186811869118701187111872118731187411875118761187711878118791188011881118821188311884118851188611887118881188911890118911189211893118941189511896118971189811899119001190111902119031190411905119061190711908119091191011911119121191311914119151191611917119181191911920119211192211923119241192511926119271192811929119301193111932119331193411935119361193711938119391194011941119421194311944119451194611947119481194911950119511195211953119541195511956119571195811959119601196111962119631196411965119661196711968119691197011971119721197311974119751197611977119781197911980119811198211983119841198511986119871198811989119901199111992119931199411995119961199711998119991200012001120021200312004120051200612007120081200912010120111201212013120141201512016120171201812019120201202112022120231202412025120261202712028120291203012031120321203312034120351203612037120381203912040120411204212043120441204512046120471204812049120501205112052120531205412055120561205712058120591206012061120621206312064120651206612067120681206912070120711207212073120741207512076120771207812079120801208112082120831208412085120861208712088120891209012091120921209312094120951209612097120981209912100121011210212103121041210512106121071210812109121101211112112121131211412115121161211712118121191212012121121221212312124121251212612127121281212912130121311213212133121341213512136121371213812139121401214112142121431214412145121461214712148121491215012151121521215312154121551215612157121581215912160121611216212163121641216512166121671216812169121701217112172121731217412175121761217712178121791218012181121821218312184121851218612187121881218912190121911219212193121941219512196121971219812199122001220112202122031220412205122061220712208122091221012211122121221312214122151221612217122181221912220122211222212223122241222512226122271222812229122301223112232122331223412235122361223712238122391224012241122421224312244122451224612247122481224912250122511225212253122541225512256122571225812259122601226112262122631226412265122661226712268122691227012271122721227312274122751227612277122781227912280122811228212283122841228512286122871228812289122901229112292122931229412295122961229712298122991230012301123021230312304123051230612307123081230912310123111231212313123141231512316123171231812319123201232112322123231232412325123261232712328123291233012331123321233312334123351233612337123381233912340123411234212343123441234512346123471234812349123501235112352123531235412355123561235712358123591236012361123621236312364123651236612367123681236912370123711237212373123741237512376123771237812379123801238112382123831238412385123861238712388123891239012391123921239312394123951239612397123981239912400124011240212403124041240512406124071240812409124101241112412124131241412415124161241712418124191242012421124221242312424124251242612427124281242912430124311243212433124341243512436124371243812439124401244112442124431244412445124461244712448124491245012451124521245312454124551245612457124581245912460124611246212463124641246512466124671246812469124701247112472124731247412475124761247712478124791248012481124821248312484124851248612487124881248912490124911249212493124941249512496124971249812499125001250112502125031250412505125061250712508125091251012511125121251312514125151251612517125181251912520125211252212523125241252512526125271252812529125301253112532125331253412535125361253712538125391254012541125421254312544125451254612547125481254912550125511255212553125541255512556125571255812559125601256112562125631256412565125661256712568125691257012571125721257312574125751257612577125781257912580125811258212583125841258512586125871258812589125901259112592125931259412595125961259712598125991260012601126021260312604126051260612607126081260912610126111261212613126141261512616126171261812619126201262112622126231262412625126261262712628126291263012631126321263312634126351263612637126381263912640126411264212643126441264512646126471264812649126501265112652126531265412655126561265712658126591266012661126621266312664126651266612667126681266912670126711267212673126741267512676126771267812679126801268112682126831268412685126861268712688126891269012691126921269312694126951269612697126981269912700127011270212703127041270512706127071270812709127101271112712127131271412715127161271712718127191272012721127221272312724127251272612727127281272912730127311273212733127341273512736127371273812739127401274112742127431274412745127461274712748127491275012751127521275312754127551275612757127581275912760127611276212763127641276512766127671276812769127701277112772127731277412775127761277712778127791278012781127821278312784127851278612787127881278912790127911279212793127941279512796127971279812799128001280112802128031280412805128061280712808128091281012811128121281312814128151281612817128181281912820128211282212823128241282512826128271282812829128301283112832128331283412835128361283712838128391284012841128421284312844128451284612847128481284912850128511285212853128541285512856128571285812859128601286112862128631286412865128661286712868128691287012871128721287312874128751287612877128781287912880128811288212883128841288512886128871288812889128901289112892128931289412895128961289712898128991290012901129021290312904129051290612907129081290912910129111291212913129141291512916129171291812919129201292112922129231292412925129261292712928129291293012931129321293312934129351293612937129381293912940129411294212943129441294512946129471294812949129501295112952129531295412955129561295712958129591296012961129621296312964129651296612967129681296912970129711297212973129741297512976129771297812979129801298112982129831298412985129861298712988129891299012991129921299312994129951299612997129981299913000130011300213003130041300513006130071300813009130101301113012130131301413015130161301713018130191302013021130221302313024130251302613027130281302913030130311303213033130341303513036130371303813039130401304113042130431304413045130461304713048130491305013051130521305313054130551305613057130581305913060130611306213063130641306513066130671306813069130701307113072130731307413075130761307713078130791308013081130821308313084130851308613087130881308913090130911309213093130941309513096130971309813099131001310113102131031310413105131061310713108131091311013111131121311313114131151311613117131181311913120131211312213123131241312513126131271312813129131301313113132131331313413135131361313713138131391314013141131421314313144131451314613147131481314913150131511315213153131541315513156131571315813159131601316113162131631316413165131661316713168131691317013171131721317313174131751317613177131781317913180131811318213183131841318513186131871318813189131901319113192131931319413195131961319713198131991320013201132021320313204132051320613207132081320913210132111321213213132141321513216132171321813219132201322113222132231322413225132261322713228132291323013231132321323313234132351323613237132381323913240132411324213243132441324513246132471324813249132501325113252132531325413255132561325713258132591326013261132621326313264132651326613267132681326913270132711327213273132741327513276132771327813279132801328113282132831328413285132861328713288132891329013291132921329313294132951329613297132981329913300133011330213303133041330513306133071330813309133101331113312133131331413315133161331713318133191332013321133221332313324133251332613327133281332913330133311333213333133341333513336133371333813339133401334113342133431334413345133461334713348133491335013351133521335313354133551335613357133581335913360133611336213363133641336513366133671336813369133701337113372133731337413375133761337713378133791338013381133821338313384133851338613387133881338913390133911339213393133941339513396133971339813399134001340113402134031340413405134061340713408134091341013411134121341313414134151341613417134181341913420134211342213423134241342513426134271342813429134301343113432134331343413435134361343713438134391344013441134421344313444134451344613447134481344913450134511345213453134541345513456134571345813459134601346113462134631346413465134661346713468134691347013471134721347313474134751347613477134781347913480134811348213483134841348513486134871348813489134901349113492134931349413495134961349713498134991350013501135021350313504135051350613507135081350913510135111351213513135141351513516135171351813519135201352113522135231352413525135261352713528135291353013531135321353313534135351353613537135381353913540135411354213543135441354513546135471354813549135501355113552135531355413555135561355713558135591356013561135621356313564135651356613567135681356913570135711357213573135741357513576135771357813579135801358113582135831358413585135861358713588135891359013591135921359313594135951359613597135981359913600136011360213603136041360513606136071360813609136101361113612136131361413615136161361713618136191362013621136221362313624136251362613627136281362913630136311363213633136341363513636136371363813639136401364113642136431364413645136461364713648136491365013651136521365313654136551365613657136581365913660136611366213663136641366513666136671366813669136701367113672136731367413675136761367713678136791368013681136821368313684136851368613687136881368913690136911369213693136941369513696136971369813699137001370113702137031370413705137061370713708137091371013711137121371313714137151371613717137181371913720137211372213723137241372513726137271372813729137301373113732137331373413735137361373713738137391374013741137421374313744137451374613747137481374913750137511375213753137541375513756137571375813759137601376113762137631376413765137661376713768137691377013771137721377313774137751377613777137781377913780137811378213783137841378513786137871378813789137901379113792137931379413795137961379713798137991380013801138021380313804138051380613807138081380913810138111381213813138141381513816138171381813819138201382113822138231382413825138261382713828138291383013831138321383313834138351383613837138381383913840138411384213843138441384513846138471384813849138501385113852138531385413855138561385713858138591386013861138621386313864138651386613867138681386913870138711387213873138741387513876138771387813879138801388113882138831388413885138861388713888138891389013891138921389313894138951389613897138981389913900139011390213903139041390513906139071390813909139101391113912139131391413915139161391713918139191392013921139221392313924139251392613927139281392913930139311393213933139341393513936139371393813939139401394113942139431394413945139461394713948139491395013951139521395313954139551395613957139581395913960139611396213963139641396513966139671396813969139701397113972139731397413975139761397713978139791398013981139821398313984139851398613987139881398913990139911399213993139941399513996139971399813999140001400114002140031400414005140061400714008140091401014011140121401314014140151401614017140181401914020140211402214023140241402514026140271402814029140301403114032140331403414035140361403714038140391404014041140421404314044140451404614047140481404914050140511405214053140541405514056140571405814059140601406114062140631406414065140661406714068140691407014071140721407314074140751407614077140781407914080140811408214083140841408514086140871408814089140901409114092140931409414095140961409714098140991410014101141021410314104141051410614107141081410914110141111411214113141141411514116141171411814119141201412114122141231412414125141261412714128141291413014131141321413314134141351413614137141381413914140141411414214143141441414514146141471414814149141501415114152141531415414155141561415714158141591416014161141621416314164141651416614167141681416914170141711417214173141741417514176141771417814179141801418114182141831418414185141861418714188141891419014191141921419314194141951419614197141981419914200142011420214203142041420514206142071420814209142101421114212142131421414215142161421714218142191422014221142221422314224142251422614227142281422914230142311423214233142341423514236142371423814239142401424114242142431424414245142461424714248142491425014251142521425314254142551425614257142581425914260142611426214263142641426514266142671426814269142701427114272142731427414275142761427714278142791428014281142821428314284142851428614287142881428914290142911429214293142941429514296142971429814299143001430114302143031430414305143061430714308143091431014311143121431314314143151431614317143181431914320143211432214323143241432514326143271432814329143301433114332143331433414335143361433714338143391434014341143421434314344143451434614347143481434914350143511435214353143541435514356143571435814359143601436114362143631436414365143661436714368143691437014371143721437314374143751437614377143781437914380143811438214383143841438514386143871438814389143901439114392143931439414395143961439714398143991440014401144021440314404144051440614407144081440914410144111441214413144141441514416144171441814419144201442114422144231442414425144261442714428144291443014431144321443314434144351443614437144381443914440144411444214443144441444514446144471444814449144501445114452144531445414455144561445714458144591446014461144621446314464144651446614467144681446914470144711447214473144741447514476144771447814479144801448114482144831448414485144861448714488144891449014491144921449314494144951449614497144981449914500145011450214503145041450514506145071450814509145101451114512145131451414515145161451714518145191452014521145221452314524145251452614527145281452914530145311453214533145341453514536145371453814539145401454114542145431454414545145461454714548145491455014551145521455314554145551455614557145581455914560145611456214563145641456514566145671456814569145701457114572145731457414575145761457714578145791458014581145821458314584145851458614587145881458914590145911459214593145941459514596145971459814599146001460114602146031460414605146061460714608146091461014611146121461314614146151461614617146181461914620146211462214623146241462514626146271462814629146301463114632146331463414635146361463714638146391464014641146421464314644146451464614647146481464914650146511465214653146541465514656146571465814659146601466114662146631466414665146661466714668146691467014671146721467314674146751467614677146781467914680146811468214683146841468514686146871468814689146901469114692146931469414695146961469714698146991470014701147021470314704147051470614707147081470914710147111471214713147141471514716147171471814719147201472114722147231472414725147261472714728147291473014731147321473314734147351473614737147381473914740147411474214743147441474514746147471474814749147501475114752147531475414755147561475714758147591476014761147621476314764147651476614767147681476914770147711477214773147741477514776147771477814779147801478114782147831478414785147861478714788147891479014791147921479314794147951479614797147981479914800148011480214803148041480514806148071480814809148101481114812148131481414815148161481714818148191482014821148221482314824148251482614827148281482914830148311483214833148341483514836148371483814839148401484114842148431484414845148461484714848148491485014851148521485314854148551485614857148581485914860148611486214863148641486514866148671486814869148701487114872148731487414875148761487714878148791488014881148821488314884148851488614887148881488914890148911489214893148941489514896148971489814899149001490114902149031490414905149061490714908149091491014911149121491314914149151491614917149181491914920149211492214923149241492514926149271492814929149301493114932149331493414935149361493714938149391494014941149421494314944149451494614947149481494914950149511495214953149541495514956149571495814959149601496114962149631496414965149661496714968149691497014971149721497314974149751497614977149781497914980149811498214983149841498514986149871498814989149901499114992149931499414995149961499714998149991500015001150021500315004150051500615007150081500915010150111501215013150141501515016150171501815019150201502115022150231502415025150261502715028150291503015031150321503315034150351503615037150381503915040150411504215043150441504515046150471504815049150501505115052150531505415055150561505715058150591506015061150621506315064150651506615067150681506915070150711507215073150741507515076150771507815079150801508115082150831508415085150861508715088150891509015091150921509315094150951509615097150981509915100151011510215103151041510515106151071510815109151101511115112151131511415115151161511715118151191512015121151221512315124151251512615127151281512915130151311513215133151341513515136151371513815139151401514115142151431514415145151461514715148151491515015151151521515315154151551515615157151581515915160151611516215163151641516515166151671516815169151701517115172151731517415175151761517715178151791518015181151821518315184151851518615187151881518915190151911519215193151941519515196151971519815199152001520115202152031520415205152061520715208152091521015211152121521315214152151521615217152181521915220152211522215223152241522515226152271522815229152301523115232152331523415235152361523715238152391524015241152421524315244152451524615247152481524915250152511525215253152541525515256152571525815259152601526115262152631526415265152661526715268152691527015271152721527315274152751527615277152781527915280152811528215283152841528515286152871528815289152901529115292152931529415295152961529715298152991530015301153021530315304153051530615307153081530915310153111531215313153141531515316153171531815319153201532115322153231532415325153261532715328153291533015331153321533315334153351533615337153381533915340153411534215343153441534515346153471534815349153501535115352153531535415355153561535715358153591536015361153621536315364153651536615367153681536915370153711537215373153741537515376153771537815379153801538115382153831538415385153861538715388153891539015391153921539315394153951539615397153981539915400154011540215403154041540515406154071540815409154101541115412154131541415415154161541715418154191542015421154221542315424154251542615427154281542915430154311543215433154341543515436154371543815439154401544115442154431544415445154461544715448154491545015451154521545315454154551545615457154581545915460154611546215463154641546515466154671546815469154701547115472154731547415475154761547715478154791548015481154821548315484154851548615487154881548915490154911549215493154941549515496154971549815499155001550115502155031550415505155061550715508155091551015511155121551315514155151551615517155181551915520155211552215523155241552515526155271552815529155301553115532155331553415535155361553715538155391554015541155421554315544155451554615547155481554915550155511555215553155541555515556155571555815559155601556115562155631556415565155661556715568155691557015571155721557315574155751557615577155781557915580155811558215583155841558515586155871558815589155901559115592155931559415595155961559715598155991560015601156021560315604156051560615607156081560915610156111561215613156141561515616156171561815619156201562115622156231562415625156261562715628156291563015631156321563315634156351563615637156381563915640156411564215643156441564515646156471564815649156501565115652156531565415655156561565715658156591566015661156621566315664156651566615667156681566915670156711567215673156741567515676156771567815679156801568115682156831568415685156861568715688156891569015691156921569315694156951569615697156981569915700157011570215703157041570515706157071570815709157101571115712157131571415715157161571715718157191572015721157221572315724157251572615727157281572915730157311573215733157341573515736157371573815739157401574115742157431574415745157461574715748157491575015751157521575315754157551575615757157581575915760157611576215763157641576515766157671576815769157701577115772157731577415775157761577715778157791578015781157821578315784157851578615787157881578915790157911579215793157941579515796157971579815799158001580115802158031580415805158061580715808158091581015811158121581315814158151581615817158181581915820158211582215823158241582515826158271582815829158301583115832158331583415835158361583715838158391584015841158421584315844158451584615847158481584915850158511585215853158541585515856158571585815859158601586115862158631586415865158661586715868158691587015871158721587315874158751587615877158781587915880158811588215883158841588515886158871588815889158901589115892158931589415895158961589715898158991590015901159021590315904159051590615907159081590915910159111591215913159141591515916159171591815919159201592115922159231592415925159261592715928159291593015931159321593315934159351593615937159381593915940159411594215943159441594515946159471594815949159501595115952159531595415955159561595715958159591596015961159621596315964159651596615967159681596915970159711597215973159741597515976159771597815979159801598115982159831598415985159861598715988159891599015991159921599315994159951599615997159981599916000160011600216003160041600516006160071600816009160101601116012160131601416015160161601716018160191602016021160221602316024160251602616027160281602916030160311603216033160341603516036160371603816039160401604116042160431604416045160461604716048160491605016051160521605316054160551605616057160581605916060160611606216063160641606516066160671606816069160701607116072160731607416075160761607716078160791608016081160821608316084160851608616087160881608916090160911609216093160941609516096160971609816099161001610116102161031610416105161061610716108161091611016111161121611316114161151611616117161181611916120161211612216123161241612516126161271612816129161301613116132161331613416135161361613716138161391614016141161421614316144161451614616147161481614916150161511615216153161541615516156161571615816159161601616116162161631616416165161661616716168161691617016171161721617316174161751617616177161781617916180161811618216183161841618516186161871618816189161901619116192161931619416195161961619716198161991620016201162021620316204162051620616207162081620916210162111621216213162141621516216162171621816219162201622116222162231622416225162261622716228162291623016231162321623316234162351623616237162381623916240162411624216243162441624516246162471624816249162501625116252162531625416255162561625716258162591626016261162621626316264162651626616267162681626916270162711627216273162741627516276162771627816279162801628116282162831628416285162861628716288162891629016291162921629316294162951629616297162981629916300163011630216303163041630516306163071630816309163101631116312163131631416315163161631716318163191632016321163221632316324163251632616327163281632916330163311633216333163341633516336163371633816339163401634116342163431634416345163461634716348163491635016351163521635316354163551635616357163581635916360163611636216363163641636516366163671636816369163701637116372163731637416375163761637716378163791638016381163821638316384163851638616387163881638916390163911639216393163941639516396163971639816399164001640116402164031640416405164061640716408164091641016411164121641316414164151641616417164181641916420164211642216423164241642516426164271642816429164301643116432164331643416435164361643716438164391644016441164421644316444164451644616447164481644916450164511645216453164541645516456164571645816459164601646116462164631646416465164661646716468164691647016471164721647316474164751647616477164781647916480164811648216483164841648516486164871648816489164901649116492164931649416495164961649716498164991650016501165021650316504165051650616507165081650916510165111651216513165141651516516165171651816519165201652116522165231652416525165261652716528165291653016531165321653316534165351653616537165381653916540165411654216543165441654516546165471654816549165501655116552165531655416555165561655716558165591656016561165621656316564165651656616567165681656916570165711657216573165741657516576165771657816579165801658116582165831658416585165861658716588165891659016591165921659316594165951659616597165981659916600166011660216603166041660516606166071660816609166101661116612166131661416615166161661716618166191662016621166221662316624166251662616627166281662916630166311663216633166341663516636166371663816639166401664116642166431664416645166461664716648166491665016651166521665316654166551665616657166581665916660166611666216663166641666516666166671666816669166701667116672166731667416675166761667716678166791668016681166821668316684166851668616687166881668916690166911669216693166941669516696166971669816699167001670116702167031670416705167061670716708167091671016711167121671316714167151671616717167181671916720167211672216723167241672516726167271672816729167301673116732167331673416735167361673716738167391674016741167421674316744167451674616747167481674916750167511675216753167541675516756167571675816759167601676116762167631676416765167661676716768167691677016771167721677316774167751677616777167781677916780167811678216783167841678516786167871678816789167901679116792167931679416795167961679716798167991680016801168021680316804168051680616807168081680916810168111681216813168141681516816168171681816819168201682116822168231682416825168261682716828168291683016831168321683316834168351683616837168381683916840168411684216843168441684516846168471684816849168501685116852168531685416855168561685716858168591686016861168621686316864168651686616867168681686916870168711687216873168741687516876168771687816879168801688116882168831688416885168861688716888168891689016891168921689316894168951689616897168981689916900169011690216903169041690516906169071690816909169101691116912169131691416915169161691716918169191692016921169221692316924169251692616927169281692916930169311693216933169341693516936169371693816939169401694116942169431694416945169461694716948169491695016951169521695316954169551695616957169581695916960169611696216963169641696516966169671696816969169701697116972169731697416975169761697716978169791698016981169821698316984169851698616987169881698916990169911699216993169941699516996169971699816999170001700117002170031700417005170061700717008170091701017011170121701317014170151701617017170181701917020170211702217023170241702517026170271702817029170301703117032170331703417035170361703717038170391704017041170421704317044170451704617047170481704917050170511705217053170541705517056170571705817059170601706117062170631706417065170661706717068170691707017071170721707317074170751707617077170781707917080170811708217083170841708517086170871708817089170901709117092170931709417095170961709717098170991710017101171021710317104171051710617107171081710917110171111711217113171141711517116171171711817119171201712117122171231712417125171261712717128171291713017131171321713317134171351713617137171381713917140171411714217143171441714517146171471714817149171501715117152171531715417155171561715717158171591716017161171621716317164171651716617167171681716917170171711717217173171741717517176171771717817179171801718117182171831718417185171861718717188171891719017191171921719317194171951719617197171981719917200172011720217203172041720517206172071720817209172101721117212172131721417215172161721717218172191722017221172221722317224172251722617227172281722917230172311723217233172341723517236172371723817239172401724117242172431724417245172461724717248172491725017251172521725317254172551725617257172581725917260172611726217263172641726517266172671726817269172701727117272172731727417275172761727717278172791728017281172821728317284172851728617287172881728917290172911729217293172941729517296172971729817299173001730117302173031730417305173061730717308173091731017311173121731317314173151731617317173181731917320173211732217323173241732517326173271732817329173301733117332173331733417335173361733717338173391734017341173421734317344173451734617347173481734917350173511735217353173541735517356173571735817359173601736117362173631736417365173661736717368173691737017371173721737317374173751737617377173781737917380173811738217383173841738517386173871738817389173901739117392173931739417395173961739717398173991740017401174021740317404174051740617407174081740917410174111741217413174141741517416174171741817419174201742117422174231742417425174261742717428174291743017431174321743317434174351743617437174381743917440174411744217443174441744517446174471744817449174501745117452174531745417455174561745717458174591746017461174621746317464174651746617467174681746917470174711747217473174741747517476174771747817479174801748117482174831748417485174861748717488174891749017491174921749317494174951749617497174981749917500175011750217503175041750517506175071750817509175101751117512175131751417515175161751717518175191752017521175221752317524175251752617527175281752917530175311753217533175341753517536175371753817539175401754117542175431754417545175461754717548175491755017551175521755317554175551755617557175581755917560175611756217563175641756517566175671756817569175701757117572175731757417575175761757717578175791758017581175821758317584175851758617587175881758917590175911759217593175941759517596175971759817599176001760117602176031760417605176061760717608176091761017611176121761317614176151761617617176181761917620176211762217623176241762517626176271762817629176301763117632176331763417635176361763717638176391764017641176421764317644176451764617647176481764917650176511765217653176541765517656176571765817659176601766117662176631766417665176661766717668176691767017671176721767317674176751767617677176781767917680176811768217683176841768517686176871768817689176901769117692176931769417695176961769717698176991770017701177021770317704177051770617707177081770917710177111771217713177141771517716177171771817719177201772117722177231772417725177261772717728177291773017731177321773317734177351773617737177381773917740177411774217743177441774517746177471774817749177501775117752177531775417755177561775717758177591776017761177621776317764177651776617767177681776917770177711777217773177741777517776177771777817779177801778117782177831778417785177861778717788177891779017791177921779317794177951779617797177981779917800178011780217803178041780517806178071780817809178101781117812178131781417815178161781717818178191782017821178221782317824178251782617827178281782917830178311783217833178341783517836178371783817839178401784117842178431784417845178461784717848178491785017851178521785317854178551785617857178581785917860178611786217863178641786517866178671786817869178701787117872178731787417875178761787717878178791788017881178821788317884178851788617887178881788917890178911789217893178941789517896178971789817899179001790117902179031790417905179061790717908179091791017911179121791317914179151791617917179181791917920179211792217923179241792517926179271792817929179301793117932179331793417935179361793717938179391794017941179421794317944179451794617947179481794917950179511795217953179541795517956179571795817959179601796117962179631796417965179661796717968179691797017971179721797317974179751797617977179781797917980179811798217983179841798517986179871798817989179901799117992179931799417995179961799717998179991800018001180021800318004180051800618007180081800918010180111801218013180141801518016180171801818019180201802118022180231802418025180261802718028180291803018031180321803318034180351803618037180381803918040180411804218043180441804518046180471804818049180501805118052180531805418055180561805718058180591806018061180621806318064180651806618067180681806918070180711807218073180741807518076180771807818079180801808118082180831808418085180861808718088180891809018091180921809318094180951809618097180981809918100181011810218103181041810518106181071810818109181101811118112181131811418115181161811718118181191812018121181221812318124181251812618127181281812918130181311813218133181341813518136181371813818139181401814118142181431814418145181461814718148181491815018151181521815318154181551815618157181581815918160181611816218163181641816518166181671816818169181701817118172181731817418175181761817718178181791818018181181821818318184181851818618187181881818918190181911819218193181941819518196181971819818199182001820118202182031820418205182061820718208182091821018211182121821318214182151821618217182181821918220182211822218223182241822518226182271822818229182301823118232182331823418235182361823718238182391824018241182421824318244182451824618247182481824918250182511825218253182541825518256182571825818259182601826118262182631826418265182661826718268182691827018271182721827318274182751827618277182781827918280182811828218283182841828518286182871828818289182901829118292182931829418295182961829718298182991830018301183021830318304183051830618307183081830918310183111831218313183141831518316183171831818319183201832118322183231832418325183261832718328183291833018331183321833318334183351833618337183381833918340183411834218343183441834518346183471834818349183501835118352183531835418355183561835718358183591836018361183621836318364183651836618367183681836918370183711837218373183741837518376183771837818379183801838118382183831838418385183861838718388183891839018391183921839318394183951839618397183981839918400184011840218403184041840518406184071840818409184101841118412184131841418415184161841718418184191842018421184221842318424184251842618427184281842918430184311843218433184341843518436184371843818439184401844118442184431844418445184461844718448184491845018451184521845318454184551845618457184581845918460184611846218463184641846518466184671846818469184701847118472184731847418475184761847718478184791848018481184821848318484184851848618487184881848918490184911849218493184941849518496184971849818499185001850118502185031850418505185061850718508185091851018511185121851318514185151851618517185181851918520185211852218523185241852518526185271852818529185301853118532185331853418535185361853718538185391854018541185421854318544185451854618547185481854918550185511855218553185541855518556185571855818559185601856118562185631856418565185661856718568185691857018571185721857318574185751857618577185781857918580185811858218583185841858518586185871858818589185901859118592185931859418595185961859718598185991860018601186021860318604186051860618607186081860918610186111861218613186141861518616186171861818619186201862118622186231862418625186261862718628186291863018631186321863318634186351863618637186381863918640186411864218643186441864518646186471864818649186501865118652186531865418655186561865718658186591866018661186621866318664186651866618667186681866918670186711867218673186741867518676186771867818679186801868118682186831868418685186861868718688186891869018691186921869318694186951869618697186981869918700187011870218703187041870518706187071870818709187101871118712187131871418715187161871718718187191872018721187221872318724187251872618727187281872918730187311873218733187341873518736187371873818739187401874118742187431874418745187461874718748187491875018751187521875318754187551875618757187581875918760187611876218763187641876518766187671876818769187701877118772187731877418775187761877718778187791878018781187821878318784187851878618787187881878918790187911879218793187941879518796187971879818799188001880118802188031880418805188061880718808188091881018811188121881318814188151881618817188181881918820188211882218823188241882518826188271882818829188301883118832188331883418835188361883718838188391884018841188421884318844188451884618847188481884918850188511885218853188541885518856188571885818859188601886118862188631886418865188661886718868188691887018871188721887318874188751887618877188781887918880188811888218883188841888518886188871888818889188901889118892188931889418895188961889718898188991890018901189021890318904189051890618907189081890918910189111891218913189141891518916189171891818919189201892118922189231892418925189261892718928189291893018931189321893318934189351893618937189381893918940189411894218943189441894518946189471894818949189501895118952189531895418955189561895718958189591896018961189621896318964189651896618967189681896918970189711897218973189741897518976189771897818979189801898118982189831898418985189861898718988189891899018991189921899318994189951899618997189981899919000190011900219003190041900519006190071900819009190101901119012190131901419015190161901719018190191902019021190221902319024190251902619027190281902919030190311903219033190341903519036190371903819039190401904119042190431904419045190461904719048190491905019051190521905319054190551905619057190581905919060190611906219063190641906519066190671906819069190701907119072190731907419075190761907719078190791908019081190821908319084190851908619087190881908919090190911909219093190941909519096190971909819099191001910119102191031910419105191061910719108191091911019111191121911319114191151911619117191181911919120191211912219123191241912519126191271912819129191301913119132191331913419135191361913719138191391914019141191421914319144191451914619147191481914919150191511915219153191541915519156191571915819159191601916119162191631916419165191661916719168191691917019171191721917319174191751917619177191781917919180191811918219183191841918519186191871918819189191901919119192191931919419195191961919719198191991920019201192021920319204192051920619207192081920919210192111921219213192141921519216192171921819219192201922119222192231922419225192261922719228192291923019231192321923319234192351923619237192381923919240192411924219243192441924519246192471924819249192501925119252192531925419255192561925719258192591926019261192621926319264192651926619267192681926919270192711927219273192741927519276192771927819279192801928119282192831928419285192861928719288192891929019291192921929319294192951929619297192981929919300193011930219303193041930519306193071930819309193101931119312193131931419315193161931719318193191932019321193221932319324193251932619327193281932919330193311933219333193341933519336193371933819339193401934119342193431934419345193461934719348193491935019351193521935319354193551935619357193581935919360193611936219363193641936519366193671936819369193701937119372193731937419375193761937719378193791938019381193821938319384193851938619387193881938919390193911939219393193941939519396193971939819399194001940119402194031940419405194061940719408194091941019411194121941319414194151941619417194181941919420194211942219423194241942519426194271942819429194301943119432194331943419435194361943719438194391944019441194421944319444194451944619447194481944919450194511945219453194541945519456194571945819459194601946119462194631946419465194661946719468194691947019471194721947319474194751947619477194781947919480194811948219483194841948519486194871948819489194901949119492194931949419495194961949719498194991950019501195021950319504195051950619507195081950919510195111951219513195141951519516195171951819519195201952119522195231952419525195261952719528195291953019531195321953319534195351953619537195381953919540195411954219543195441954519546195471954819549195501955119552195531955419555195561955719558195591956019561195621956319564195651956619567195681956919570195711957219573195741957519576195771957819579195801958119582195831958419585195861958719588195891959019591195921959319594195951959619597195981959919600196011960219603196041960519606196071960819609196101961119612196131961419615196161961719618196191962019621196221962319624196251962619627196281962919630196311963219633196341963519636196371963819639196401964119642196431964419645196461964719648196491965019651196521965319654196551965619657196581965919660196611966219663196641966519666196671966819669196701967119672196731967419675196761967719678196791968019681196821968319684196851968619687196881968919690196911969219693196941969519696196971969819699197001970119702197031970419705197061970719708197091971019711197121971319714197151971619717197181971919720197211972219723197241972519726197271972819729197301973119732197331973419735197361973719738197391974019741197421974319744197451974619747197481974919750197511975219753197541975519756197571975819759197601976119762197631976419765197661976719768197691977019771197721977319774197751977619777197781977919780197811978219783197841978519786197871978819789197901979119792197931979419795197961979719798197991980019801198021980319804198051980619807198081980919810198111981219813198141981519816198171981819819198201982119822198231982419825198261982719828198291983019831198321983319834198351983619837198381983919840198411984219843198441984519846198471984819849198501985119852198531985419855198561985719858198591986019861198621986319864198651986619867198681986919870198711987219873198741987519876198771987819879198801988119882198831988419885198861988719888198891989019891198921989319894198951989619897198981989919900199011990219903199041990519906199071990819909199101991119912199131991419915199161991719918199191992019921199221992319924199251992619927199281992919930199311993219933199341993519936199371993819939199401994119942199431994419945199461994719948199491995019951199521995319954199551995619957199581995919960199611996219963199641996519966199671996819969199701997119972199731997419975199761997719978199791998019981199821998319984199851998619987199881998919990199911999219993199941999519996199971999819999200002000120002200032000420005200062000720008200092001020011200122001320014200152001620017200182001920020200212002220023200242002520026200272002820029200302003120032200332003420035200362003720038200392004020041200422004320044200452004620047200482004920050200512005220053200542005520056200572005820059200602006120062200632006420065200662006720068200692007020071200722007320074200752007620077200782007920080200812008220083200842008520086200872008820089200902009120092200932009420095200962009720098200992010020101201022010320104201052010620107201082010920110201112011220113201142011520116201172011820119201202012120122201232012420125201262012720128201292013020131201322013320134201352013620137201382013920140201412014220143201442014520146201472014820149201502015120152201532015420155201562015720158201592016020161201622016320164201652016620167201682016920170201712017220173201742017520176201772017820179201802018120182201832018420185201862018720188201892019020191201922019320194201952019620197201982019920200202012020220203202042020520206202072020820209202102021120212202132021420215202162021720218202192022020221202222022320224202252022620227202282022920230202312023220233202342023520236202372023820239202402024120242202432024420245202462024720248202492025020251202522025320254202552025620257202582025920260202612026220263202642026520266202672026820269202702027120272202732027420275202762027720278202792028020281202822028320284202852028620287202882028920290202912029220293202942029520296202972029820299203002030120302203032030420305203062030720308203092031020311203122031320314203152031620317203182031920320203212032220323203242032520326203272032820329203302033120332203332033420335203362033720338203392034020341203422034320344203452034620347203482034920350203512035220353203542035520356203572035820359203602036120362203632036420365203662036720368203692037020371203722037320374203752037620377203782037920380203812038220383203842038520386203872038820389203902039120392203932039420395203962039720398203992040020401204022040320404204052040620407204082040920410204112041220413204142041520416204172041820419204202042120422204232042420425204262042720428204292043020431204322043320434204352043620437204382043920440204412044220443204442044520446204472044820449204502045120452204532045420455204562045720458204592046020461204622046320464204652046620467204682046920470204712047220473204742047520476204772047820479204802048120482204832048420485204862048720488204892049020491204922049320494204952049620497204982049920500205012050220503205042050520506205072050820509205102051120512205132051420515205162051720518205192052020521205222052320524205252052620527205282052920530205312053220533205342053520536205372053820539205402054120542205432054420545205462054720548205492055020551205522055320554205552055620557205582055920560205612056220563205642056520566205672056820569205702057120572205732057420575205762057720578205792058020581205822058320584205852058620587205882058920590205912059220593205942059520596205972059820599206002060120602206032060420605206062060720608206092061020611206122061320614206152061620617206182061920620206212062220623206242062520626206272062820629206302063120632206332063420635206362063720638206392064020641206422064320644206452064620647206482064920650206512065220653206542065520656206572065820659206602066120662206632066420665206662066720668206692067020671206722067320674206752067620677206782067920680206812068220683206842068520686206872068820689206902069120692206932069420695206962069720698206992070020701207022070320704207052070620707207082070920710207112071220713207142071520716207172071820719207202072120722207232072420725207262072720728207292073020731207322073320734207352073620737207382073920740207412074220743207442074520746207472074820749207502075120752207532075420755207562075720758207592076020761207622076320764207652076620767207682076920770207712077220773207742077520776207772077820779207802078120782207832078420785207862078720788207892079020791207922079320794207952079620797207982079920800208012080220803208042080520806208072080820809208102081120812208132081420815208162081720818208192082020821208222082320824208252082620827208282082920830208312083220833208342083520836208372083820839208402084120842208432084420845208462084720848208492085020851208522085320854208552085620857208582085920860208612086220863208642086520866208672086820869208702087120872208732087420875208762087720878208792088020881208822088320884208852088620887208882088920890208912089220893208942089520896208972089820899209002090120902209032090420905209062090720908209092091020911209122091320914209152091620917209182091920920209212092220923209242092520926209272092820929209302093120932209332093420935209362093720938209392094020941209422094320944209452094620947209482094920950209512095220953209542095520956209572095820959209602096120962209632096420965209662096720968209692097020971209722097320974209752097620977209782097920980209812098220983209842098520986209872098820989209902099120992209932099420995209962099720998209992100021001210022100321004210052100621007210082100921010210112101221013210142101521016210172101821019210202102121022210232102421025210262102721028210292103021031210322103321034210352103621037210382103921040210412104221043210442104521046210472104821049210502105121052210532105421055210562105721058210592106021061210622106321064210652106621067210682106921070210712107221073210742107521076210772107821079210802108121082210832108421085210862108721088210892109021091210922109321094210952109621097210982109921100211012110221103211042110521106211072110821109211102111121112211132111421115211162111721118211192112021121211222112321124211252112621127211282112921130211312113221133211342113521136211372113821139211402114121142211432114421145211462114721148211492115021151211522115321154211552115621157211582115921160211612116221163211642116521166211672116821169211702117121172211732117421175211762117721178211792118021181211822118321184211852118621187211882118921190211912119221193211942119521196211972119821199212002120121202212032120421205212062120721208212092121021211212122121321214212152121621217212182121921220212212122221223212242122521226212272122821229212302123121232212332123421235212362123721238212392124021241212422124321244212452124621247212482124921250212512125221253212542125521256212572125821259212602126121262212632126421265212662126721268212692127021271212722127321274212752127621277212782127921280212812128221283212842128521286212872128821289212902129121292212932129421295212962129721298212992130021301213022130321304213052130621307213082130921310213112131221313213142131521316213172131821319213202132121322213232132421325213262132721328213292133021331213322133321334213352133621337213382133921340213412134221343213442134521346213472134821349213502135121352213532135421355213562135721358213592136021361213622136321364213652136621367213682136921370213712137221373213742137521376213772137821379213802138121382213832138421385213862138721388213892139021391213922139321394213952139621397213982139921400214012140221403214042140521406214072140821409214102141121412214132141421415214162141721418214192142021421214222142321424214252142621427214282142921430214312143221433214342143521436214372143821439214402144121442214432144421445214462144721448214492145021451214522145321454214552145621457214582145921460214612146221463214642146521466214672146821469214702147121472214732147421475214762147721478214792148021481214822148321484214852148621487214882148921490214912149221493214942149521496214972149821499215002150121502215032150421505215062150721508215092151021511215122151321514215152151621517215182151921520215212152221523215242152521526215272152821529215302153121532215332153421535215362153721538215392154021541215422154321544215452154621547215482154921550215512155221553215542155521556215572155821559215602156121562215632156421565215662156721568215692157021571215722157321574215752157621577215782157921580215812158221583215842158521586215872158821589215902159121592215932159421595215962159721598215992160021601216022160321604216052160621607216082160921610216112161221613216142161521616216172161821619216202162121622216232162421625216262162721628216292163021631216322163321634216352163621637216382163921640216412164221643216442164521646216472164821649216502165121652216532165421655216562165721658216592166021661216622166321664216652166621667216682166921670216712167221673216742167521676216772167821679216802168121682216832168421685216862168721688216892169021691216922169321694216952169621697216982169921700217012170221703217042170521706217072170821709217102171121712217132171421715217162171721718217192172021721217222172321724217252172621727217282172921730217312173221733217342173521736217372173821739217402174121742217432174421745217462174721748217492175021751217522175321754217552175621757217582175921760217612176221763217642176521766217672176821769217702177121772217732177421775217762177721778217792178021781217822178321784217852178621787217882178921790217912179221793217942179521796217972179821799218002180121802218032180421805218062180721808218092181021811218122181321814218152181621817218182181921820218212182221823218242182521826218272182821829218302183121832218332183421835218362183721838218392184021841218422184321844218452184621847218482184921850218512185221853218542185521856218572185821859218602186121862218632186421865218662186721868218692187021871218722187321874218752187621877218782187921880218812188221883218842188521886218872188821889218902189121892218932189421895218962189721898218992190021901219022190321904219052190621907219082190921910219112191221913219142191521916219172191821919219202192121922219232192421925219262192721928219292193021931219322193321934219352193621937219382193921940219412194221943219442194521946219472194821949219502195121952219532195421955219562195721958219592196021961219622196321964219652196621967219682196921970219712197221973219742197521976219772197821979219802198121982219832198421985219862198721988219892199021991219922199321994219952199621997219982199922000220012200222003220042200522006220072200822009220102201122012220132201422015220162201722018220192202022021220222202322024220252202622027220282202922030220312203222033220342203522036220372203822039220402204122042220432204422045220462204722048220492205022051220522205322054220552205622057220582205922060220612206222063220642206522066220672206822069220702207122072220732207422075220762207722078220792208022081220822208322084220852208622087220882208922090220912209222093220942209522096220972209822099221002210122102221032210422105221062210722108221092211022111221122211322114221152211622117221182211922120221212212222123221242212522126221272212822129221302213122132221332213422135221362213722138221392214022141221422214322144221452214622147221482214922150221512215222153221542215522156221572215822159221602216122162221632216422165221662216722168221692217022171221722217322174221752217622177221782217922180221812218222183221842218522186221872218822189221902219122192221932219422195221962219722198221992220022201222022220322204222052220622207222082220922210222112221222213222142221522216222172221822219222202222122222222232222422225222262222722228222292223022231222322223322234222352223622237222382223922240222412224222243222442224522246222472224822249222502225122252222532225422255222562225722258222592226022261222622226322264222652226622267222682226922270222712227222273222742227522276222772227822279222802228122282222832228422285222862228722288222892229022291222922229322294222952229622297222982229922300223012230222303223042230522306223072230822309223102231122312223132231422315223162231722318223192232022321223222232322324223252232622327223282232922330223312233222333223342233522336223372233822339223402234122342223432234422345223462234722348223492235022351223522235322354223552235622357223582235922360223612236222363223642236522366223672236822369223702237122372223732237422375223762237722378223792238022381223822238322384223852238622387223882238922390223912239222393223942239522396223972239822399224002240122402224032240422405224062240722408224092241022411224122241322414224152241622417224182241922420224212242222423224242242522426224272242822429224302243122432224332243422435224362243722438224392244022441224422244322444224452244622447224482244922450224512245222453224542245522456224572245822459224602246122462224632246422465224662246722468224692247022471224722247322474224752247622477224782247922480224812248222483224842248522486224872248822489224902249122492224932249422495224962249722498224992250022501225022250322504225052250622507225082250922510225112251222513225142251522516225172251822519225202252122522225232252422525225262252722528225292253022531225322253322534225352253622537225382253922540225412254222543225442254522546225472254822549225502255122552225532255422555225562255722558225592256022561225622256322564225652256622567225682256922570225712257222573225742257522576225772257822579225802258122582225832258422585225862258722588225892259022591225922259322594225952259622597225982259922600226012260222603226042260522606226072260822609226102261122612226132261422615226162261722618226192262022621226222262322624226252262622627226282262922630226312263222633226342263522636226372263822639226402264122642226432264422645226462264722648226492265022651226522265322654226552265622657226582265922660226612266222663226642266522666226672266822669226702267122672226732267422675226762267722678226792268022681226822268322684226852268622687226882268922690226912269222693226942269522696226972269822699227002270122702227032270422705227062270722708227092271022711227122271322714227152271622717227182271922720227212272222723227242272522726227272272822729227302273122732227332273422735227362273722738227392274022741227422274322744227452274622747227482274922750227512275222753227542275522756227572275822759227602276122762227632276422765227662276722768227692277022771227722277322774227752277622777227782277922780227812278222783227842278522786227872278822789227902279122792227932279422795227962279722798227992280022801228022280322804228052280622807228082280922810228112281222813228142281522816228172281822819228202282122822228232282422825228262282722828228292283022831228322283322834228352283622837228382283922840228412284222843228442284522846228472284822849228502285122852228532285422855228562285722858228592286022861228622286322864228652286622867228682286922870228712287222873228742287522876228772287822879228802288122882228832288422885228862288722888228892289022891228922289322894228952289622897228982289922900229012290222903229042290522906229072290822909229102291122912229132291422915229162291722918229192292022921229222292322924229252292622927229282292922930229312293222933229342293522936229372293822939229402294122942229432294422945229462294722948229492295022951229522295322954229552295622957229582295922960229612296222963229642296522966229672296822969229702297122972229732297422975229762297722978229792298022981229822298322984229852298622987229882298922990229912299222993229942299522996229972299822999230002300123002230032300423005230062300723008230092301023011230122301323014230152301623017230182301923020230212302223023230242302523026230272302823029230302303123032230332303423035230362303723038230392304023041230422304323044230452304623047230482304923050230512305223053230542305523056230572305823059230602306123062230632306423065230662306723068230692307023071230722307323074230752307623077230782307923080230812308223083230842308523086230872308823089230902309123092230932309423095230962309723098230992310023101231022310323104231052310623107231082310923110231112311223113231142311523116231172311823119231202312123122231232312423125231262312723128231292313023131231322313323134231352313623137231382313923140231412314223143231442314523146231472314823149231502315123152231532315423155231562315723158231592316023161231622316323164231652316623167231682316923170231712317223173231742317523176231772317823179231802318123182231832318423185231862318723188231892319023191231922319323194231952319623197231982319923200232012320223203232042320523206232072320823209232102321123212232132321423215232162321723218232192322023221232222322323224232252322623227232282322923230232312323223233232342323523236232372323823239232402324123242232432324423245232462324723248232492325023251232522325323254232552325623257232582325923260232612326223263232642326523266232672326823269232702327123272232732327423275232762327723278232792328023281232822328323284232852328623287232882328923290232912329223293232942329523296232972329823299233002330123302233032330423305233062330723308233092331023311233122331323314233152331623317233182331923320233212332223323233242332523326233272332823329233302333123332233332333423335233362333723338233392334023341233422334323344233452334623347233482334923350233512335223353233542335523356233572335823359233602336123362233632336423365233662336723368233692337023371233722337323374233752337623377233782337923380233812338223383233842338523386233872338823389233902339123392233932339423395233962339723398233992340023401234022340323404234052340623407234082340923410234112341223413234142341523416234172341823419234202342123422234232342423425234262342723428234292343023431234322343323434234352343623437234382343923440234412344223443234442344523446234472344823449234502345123452234532345423455234562345723458234592346023461234622346323464234652346623467234682346923470234712347223473234742347523476234772347823479234802348123482234832348423485234862348723488234892349023491234922349323494234952349623497234982349923500235012350223503235042350523506235072350823509235102351123512235132351423515235162351723518235192352023521235222352323524235252352623527235282352923530235312353223533235342353523536235372353823539235402354123542235432354423545235462354723548235492355023551235522355323554235552355623557235582355923560235612356223563235642356523566235672356823569235702357123572235732357423575235762357723578235792358023581235822358323584235852358623587235882358923590235912359223593235942359523596235972359823599236002360123602236032360423605236062360723608236092361023611236122361323614236152361623617236182361923620236212362223623236242362523626236272362823629236302363123632236332363423635236362363723638236392364023641236422364323644236452364623647236482364923650236512365223653236542365523656236572365823659236602366123662236632366423665236662366723668236692367023671236722367323674236752367623677236782367923680236812368223683236842368523686236872368823689236902369123692236932369423695236962369723698236992370023701237022370323704237052370623707237082370923710237112371223713237142371523716237172371823719237202372123722237232372423725237262372723728237292373023731237322373323734237352373623737237382373923740237412374223743237442374523746237472374823749237502375123752237532375423755237562375723758237592376023761237622376323764237652376623767237682376923770237712377223773237742377523776237772377823779237802378123782237832378423785237862378723788237892379023791237922379323794237952379623797237982379923800238012380223803238042380523806238072380823809238102381123812238132381423815238162381723818238192382023821238222382323824238252382623827238282382923830238312383223833238342383523836238372383823839238402384123842238432384423845238462384723848238492385023851238522385323854238552385623857238582385923860238612386223863238642386523866238672386823869238702387123872238732387423875238762387723878238792388023881238822388323884238852388623887238882388923890238912389223893238942389523896238972389823899239002390123902239032390423905239062390723908239092391023911239122391323914239152391623917239182391923920239212392223923239242392523926239272392823929239302393123932239332393423935239362393723938239392394023941239422394323944239452394623947239482394923950239512395223953239542395523956239572395823959239602396123962239632396423965239662396723968239692397023971239722397323974239752397623977239782397923980239812398223983239842398523986239872398823989239902399123992239932399423995239962399723998239992400024001240022400324004240052400624007240082400924010240112401224013240142401524016240172401824019240202402124022240232402424025240262402724028240292403024031240322403324034240352403624037240382403924040240412404224043240442404524046240472404824049240502405124052240532405424055240562405724058240592406024061240622406324064240652406624067240682406924070240712407224073240742407524076240772407824079240802408124082240832408424085240862408724088240892409024091240922409324094240952409624097240982409924100241012410224103241042410524106241072410824109241102411124112241132411424115241162411724118241192412024121241222412324124241252412624127241282412924130241312413224133241342413524136241372413824139241402414124142241432414424145241462414724148241492415024151241522415324154241552415624157241582415924160241612416224163241642416524166241672416824169241702417124172241732417424175241762417724178241792418024181241822418324184241852418624187241882418924190241912419224193241942419524196241972419824199242002420124202242032420424205242062420724208242092421024211242122421324214242152421624217242182421924220242212422224223242242422524226242272422824229242302423124232242332423424235242362423724238242392424024241242422424324244242452424624247242482424924250242512425224253242542425524256242572425824259242602426124262242632426424265242662426724268242692427024271242722427324274242752427624277242782427924280242812428224283242842428524286242872428824289242902429124292242932429424295242962429724298242992430024301243022430324304243052430624307243082430924310243112431224313243142431524316243172431824319243202432124322243232432424325243262432724328243292433024331243322433324334243352433624337243382433924340243412434224343243442434524346243472434824349243502435124352243532435424355243562435724358243592436024361243622436324364243652436624367243682436924370243712437224373243742437524376243772437824379243802438124382243832438424385243862438724388243892439024391243922439324394243952439624397243982439924400244012440224403244042440524406244072440824409244102441124412244132441424415244162441724418244192442024421244222442324424244252442624427244282442924430244312443224433244342443524436244372443824439244402444124442244432444424445244462444724448244492445024451244522445324454244552445624457244582445924460244612446224463244642446524466244672446824469244702447124472244732447424475244762447724478244792448024481244822448324484244852448624487244882448924490244912449224493244942449524496244972449824499245002450124502245032450424505245062450724508245092451024511245122451324514245152451624517245182451924520245212452224523245242452524526245272452824529245302453124532245332453424535245362453724538245392454024541245422454324544245452454624547245482454924550245512455224553245542455524556245572455824559245602456124562245632456424565245662456724568245692457024571245722457324574245752457624577245782457924580245812458224583245842458524586245872458824589245902459124592245932459424595245962459724598245992460024601246022460324604246052460624607246082460924610246112461224613246142461524616246172461824619246202462124622246232462424625246262462724628246292463024631246322463324634246352463624637246382463924640246412464224643246442464524646246472464824649246502465124652246532465424655246562465724658246592466024661246622466324664246652466624667246682466924670246712467224673246742467524676246772467824679246802468124682246832468424685246862468724688246892469024691246922469324694246952469624697246982469924700247012470224703247042470524706247072470824709247102471124712247132471424715247162471724718247192472024721247222472324724247252472624727247282472924730247312473224733247342473524736247372473824739247402474124742247432474424745247462474724748247492475024751247522475324754247552475624757247582475924760247612476224763247642476524766247672476824769247702477124772247732477424775247762477724778247792478024781247822478324784247852478624787247882478924790247912479224793247942479524796247972479824799248002480124802248032480424805248062480724808248092481024811248122481324814248152481624817248182481924820248212482224823248242482524826248272482824829248302483124832248332483424835248362483724838248392484024841248422484324844248452484624847248482484924850248512485224853248542485524856248572485824859248602486124862248632486424865248662486724868248692487024871248722487324874248752487624877248782487924880248812488224883248842488524886248872488824889248902489124892248932489424895248962489724898248992490024901249022490324904249052490624907249082490924910249112491224913249142491524916249172491824919249202492124922249232492424925249262492724928249292493024931249322493324934249352493624937249382493924940249412494224943249442494524946249472494824949249502495124952249532495424955249562495724958249592496024961249622496324964249652496624967249682496924970249712497224973249742497524976249772497824979249802498124982249832498424985249862498724988249892499024991249922499324994249952499624997249982499925000250012500225003250042500525006250072500825009250102501125012250132501425015250162501725018250192502025021250222502325024250252502625027250282502925030250312503225033250342503525036250372503825039250402504125042250432504425045250462504725048250492505025051250522505325054250552505625057250582505925060250612506225063250642506525066250672506825069250702507125072250732507425075250762507725078250792508025081250822508325084250852508625087250882508925090250912509225093250942509525096250972509825099251002510125102251032510425105251062510725108251092511025111251122511325114251152511625117251182511925120251212512225123251242512525126251272512825129251302513125132251332513425135251362513725138251392514025141251422514325144251452514625147251482514925150251512515225153251542515525156251572515825159251602516125162251632516425165251662516725168251692517025171251722517325174251752517625177251782517925180251812518225183251842518525186251872518825189251902519125192251932519425195251962519725198251992520025201252022520325204252052520625207252082520925210252112521225213252142521525216252172521825219252202522125222252232522425225252262522725228252292523025231252322523325234252352523625237252382523925240252412524225243252442524525246252472524825249252502525125252252532525425255252562525725258252592526025261252622526325264252652526625267252682526925270252712527225273252742527525276252772527825279252802528125282252832528425285252862528725288252892529025291252922529325294252952529625297252982529925300253012530225303253042530525306253072530825309253102531125312253132531425315253162531725318253192532025321253222532325324253252532625327253282532925330253312533225333253342533525336253372533825339253402534125342253432534425345253462534725348253492535025351253522535325354253552535625357253582535925360253612536225363253642536525366253672536825369253702537125372253732537425375253762537725378253792538025381253822538325384253852538625387253882538925390253912539225393253942539525396253972539825399254002540125402254032540425405254062540725408254092541025411254122541325414254152541625417254182541925420254212542225423254242542525426254272542825429254302543125432254332543425435254362543725438254392544025441254422544325444254452544625447254482544925450254512545225453254542545525456254572545825459254602546125462254632546425465254662546725468254692547025471254722547325474254752547625477254782547925480254812548225483254842548525486254872548825489254902549125492254932549425495254962549725498254992550025501255022550325504255052550625507255082550925510255112551225513255142551525516255172551825519255202552125522255232552425525255262552725528255292553025531255322553325534255352553625537255382553925540255412554225543255442554525546255472554825549255502555125552255532555425555255562555725558255592556025561255622556325564255652556625567255682556925570255712557225573255742557525576255772557825579255802558125582255832558425585255862558725588255892559025591255922559325594255952559625597255982559925600256012560225603256042560525606256072560825609256102561125612256132561425615256162561725618256192562025621256222562325624256252562625627256282562925630256312563225633256342563525636256372563825639256402564125642256432564425645256462564725648256492565025651256522565325654256552565625657256582565925660256612566225663256642566525666256672566825669256702567125672256732567425675256762567725678256792568025681256822568325684256852568625687256882568925690256912569225693256942569525696256972569825699257002570125702257032570425705257062570725708257092571025711257122571325714257152571625717257182571925720257212572225723257242572525726257272572825729257302573125732257332573425735257362573725738257392574025741257422574325744257452574625747257482574925750257512575225753257542575525756257572575825759257602576125762257632576425765257662576725768257692577025771257722577325774257752577625777257782577925780257812578225783257842578525786257872578825789257902579125792257932579425795257962579725798257992580025801258022580325804258052580625807258082580925810258112581225813258142581525816258172581825819258202582125822258232582425825258262582725828258292583025831258322583325834258352583625837258382583925840258412584225843258442584525846258472584825849258502585125852258532585425855258562585725858258592586025861258622586325864258652586625867258682586925870258712587225873258742587525876258772587825879258802588125882258832588425885258862588725888258892589025891258922589325894258952589625897258982589925900259012590225903259042590525906259072590825909259102591125912259132591425915259162591725918259192592025921259222592325924259252592625927259282592925930259312593225933259342593525936259372593825939259402594125942259432594425945259462594725948259492595025951259522595325954259552595625957259582595925960259612596225963259642596525966259672596825969259702597125972259732597425975259762597725978259792598025981259822598325984259852598625987259882598925990259912599225993259942599525996259972599825999260002600126002260032600426005260062600726008260092601026011260122601326014260152601626017260182601926020260212602226023260242602526026260272602826029260302603126032260332603426035260362603726038260392604026041260422604326044260452604626047260482604926050260512605226053260542605526056260572605826059260602606126062260632606426065260662606726068260692607026071260722607326074260752607626077260782607926080260812608226083260842608526086260872608826089260902609126092260932609426095260962609726098260992610026101261022610326104261052610626107261082610926110261112611226113261142611526116261172611826119261202612126122261232612426125261262612726128261292613026131261322613326134261352613626137261382613926140261412614226143261442614526146261472614826149261502615126152261532615426155261562615726158261592616026161261622616326164261652616626167261682616926170261712617226173261742617526176261772617826179261802618126182261832618426185261862618726188261892619026191261922619326194261952619626197261982619926200262012620226203262042620526206262072620826209262102621126212262132621426215262162621726218262192622026221262222622326224262252622626227262282622926230262312623226233262342623526236262372623826239262402624126242262432624426245262462624726248262492625026251262522625326254262552625626257262582625926260262612626226263262642626526266262672626826269262702627126272262732627426275262762627726278262792628026281262822628326284262852628626287262882628926290262912629226293262942629526296262972629826299263002630126302263032630426305263062630726308263092631026311263122631326314263152631626317263182631926320263212632226323263242632526326263272632826329263302633126332263332633426335263362633726338263392634026341263422634326344263452634626347263482634926350263512635226353263542635526356263572635826359263602636126362263632636426365263662636726368263692637026371263722637326374263752637626377263782637926380263812638226383263842638526386263872638826389263902639126392263932639426395263962639726398263992640026401264022640326404264052640626407264082640926410264112641226413264142641526416264172641826419264202642126422264232642426425264262642726428264292643026431264322643326434264352643626437264382643926440264412644226443264442644526446264472644826449264502645126452264532645426455264562645726458264592646026461264622646326464264652646626467264682646926470264712647226473264742647526476264772647826479264802648126482264832648426485264862648726488264892649026491264922649326494264952649626497264982649926500265012650226503265042650526506265072650826509265102651126512265132651426515265162651726518265192652026521265222652326524265252652626527265282652926530265312653226533265342653526536265372653826539265402654126542265432654426545265462654726548265492655026551265522655326554265552655626557265582655926560265612656226563265642656526566265672656826569265702657126572265732657426575265762657726578265792658026581265822658326584265852658626587265882658926590265912659226593265942659526596265972659826599266002660126602266032660426605266062660726608266092661026611266122661326614266152661626617266182661926620266212662226623266242662526626266272662826629266302663126632266332663426635266362663726638266392664026641266422664326644266452664626647266482664926650266512665226653266542665526656266572665826659266602666126662266632666426665266662666726668266692667026671266722667326674266752667626677266782667926680266812668226683266842668526686266872668826689266902669126692266932669426695266962669726698266992670026701267022670326704267052670626707267082670926710267112671226713267142671526716267172671826719267202672126722267232672426725267262672726728267292673026731267322673326734267352673626737267382673926740267412674226743267442674526746267472674826749267502675126752267532675426755267562675726758267592676026761267622676326764267652676626767267682676926770267712677226773267742677526776267772677826779267802678126782267832678426785267862678726788267892679026791267922679326794267952679626797267982679926800268012680226803268042680526806268072680826809268102681126812268132681426815268162681726818268192682026821268222682326824268252682626827268282682926830268312683226833268342683526836268372683826839268402684126842268432684426845268462684726848268492685026851268522685326854268552685626857268582685926860268612686226863268642686526866268672686826869268702687126872268732687426875268762687726878268792688026881268822688326884268852688626887268882688926890268912689226893268942689526896268972689826899269002690126902269032690426905269062690726908269092691026911269122691326914269152691626917269182691926920269212692226923269242692526926269272692826929269302693126932269332693426935269362693726938269392694026941269422694326944269452694626947269482694926950269512695226953269542695526956269572695826959269602696126962269632696426965269662696726968269692697026971269722697326974269752697626977269782697926980269812698226983269842698526986269872698826989269902699126992269932699426995269962699726998269992700027001270022700327004270052700627007270082700927010270112701227013270142701527016270172701827019270202702127022270232702427025270262702727028270292703027031270322703327034270352703627037270382703927040270412704227043270442704527046270472704827049270502705127052270532705427055270562705727058270592706027061270622706327064270652706627067270682706927070270712707227073270742707527076270772707827079270802708127082270832708427085270862708727088270892709027091270922709327094270952709627097270982709927100271012710227103271042710527106271072710827109271102711127112271132711427115271162711727118271192712027121271222712327124271252712627127271282712927130271312713227133271342713527136271372713827139271402714127142271432714427145271462714727148271492715027151271522715327154271552715627157271582715927160271612716227163271642716527166271672716827169271702717127172271732717427175271762717727178271792718027181271822718327184271852718627187271882718927190271912719227193271942719527196271972719827199272002720127202272032720427205272062720727208272092721027211272122721327214272152721627217272182721927220272212722227223272242722527226272272722827229272302723127232272332723427235272362723727238272392724027241272422724327244272452724627247272482724927250272512725227253272542725527256272572725827259272602726127262272632726427265272662726727268272692727027271272722727327274272752727627277272782727927280272812728227283272842728527286272872728827289272902729127292272932729427295272962729727298272992730027301273022730327304273052730627307273082730927310273112731227313273142731527316273172731827319273202732127322273232732427325273262732727328273292733027331273322733327334273352733627337273382733927340273412734227343273442734527346273472734827349273502735127352273532735427355273562735727358273592736027361273622736327364273652736627367273682736927370273712737227373273742737527376273772737827379273802738127382273832738427385273862738727388273892739027391273922739327394273952739627397273982739927400274012740227403274042740527406274072740827409274102741127412274132741427415274162741727418274192742027421274222742327424274252742627427274282742927430274312743227433274342743527436274372743827439274402744127442274432744427445274462744727448274492745027451274522745327454274552745627457274582745927460274612746227463274642746527466274672746827469274702747127472274732747427475274762747727478274792748027481274822748327484274852748627487274882748927490274912749227493274942749527496274972749827499275002750127502275032750427505275062750727508275092751027511275122751327514275152751627517275182751927520275212752227523275242752527526275272752827529275302753127532275332753427535275362753727538275392754027541275422754327544275452754627547275482754927550275512755227553275542755527556275572755827559275602756127562275632756427565275662756727568275692757027571275722757327574275752757627577275782757927580275812758227583275842758527586275872758827589275902759127592275932759427595275962759727598275992760027601276022760327604276052760627607276082760927610276112761227613276142761527616276172761827619276202762127622276232762427625276262762727628276292763027631276322763327634276352763627637276382763927640276412764227643276442764527646276472764827649276502765127652276532765427655276562765727658276592766027661276622766327664276652766627667276682766927670276712767227673276742767527676276772767827679276802768127682276832768427685276862768727688276892769027691276922769327694276952769627697276982769927700277012770227703277042770527706277072770827709277102771127712277132771427715277162771727718277192772027721277222772327724277252772627727277282772927730277312773227733277342773527736277372773827739277402774127742277432774427745277462774727748277492775027751277522775327754277552775627757277582775927760277612776227763277642776527766277672776827769277702777127772277732777427775277762777727778277792778027781277822778327784277852778627787277882778927790277912779227793277942779527796277972779827799278002780127802278032780427805278062780727808278092781027811278122781327814278152781627817278182781927820278212782227823278242782527826278272782827829278302783127832278332783427835278362783727838278392784027841278422784327844278452784627847278482784927850278512785227853278542785527856278572785827859278602786127862278632786427865278662786727868278692787027871278722787327874278752787627877278782787927880278812788227883278842788527886278872788827889278902789127892278932789427895278962789727898278992790027901279022790327904279052790627907279082790927910279112791227913279142791527916279172791827919279202792127922279232792427925279262792727928279292793027931279322793327934279352793627937279382793927940279412794227943279442794527946279472794827949279502795127952279532795427955279562795727958279592796027961279622796327964279652796627967279682796927970279712797227973279742797527976279772797827979279802798127982279832798427985279862798727988279892799027991279922799327994279952799627997279982799928000280012800228003280042800528006280072800828009280102801128012280132801428015280162801728018280192802028021280222802328024280252802628027280282802928030280312803228033280342803528036280372803828039280402804128042280432804428045280462804728048280492805028051280522805328054280552805628057280582805928060280612806228063280642806528066280672806828069280702807128072280732807428075280762807728078280792808028081280822808328084280852808628087280882808928090280912809228093280942809528096280972809828099281002810128102281032810428105281062810728108281092811028111281122811328114281152811628117281182811928120281212812228123281242812528126281272812828129281302813128132281332813428135281362813728138281392814028141281422814328144281452814628147281482814928150281512815228153281542815528156281572815828159281602816128162281632816428165281662816728168281692817028171281722817328174281752817628177281782817928180281812818228183281842818528186281872818828189281902819128192281932819428195281962819728198281992820028201282022820328204282052820628207282082820928210282112821228213282142821528216282172821828219282202822128222282232822428225282262822728228282292823028231282322823328234282352823628237282382823928240282412824228243282442824528246282472824828249282502825128252282532825428255282562825728258282592826028261282622826328264282652826628267282682826928270282712827228273282742827528276282772827828279282802828128282282832828428285282862828728288282892829028291282922829328294282952829628297282982829928300283012830228303283042830528306283072830828309283102831128312283132831428315283162831728318283192832028321283222832328324283252832628327283282832928330283312833228333283342833528336283372833828339283402834128342283432834428345283462834728348283492835028351283522835328354283552835628357283582835928360283612836228363283642836528366283672836828369283702837128372283732837428375283762837728378283792838028381283822838328384283852838628387283882838928390283912839228393283942839528396283972839828399284002840128402284032840428405284062840728408284092841028411284122841328414284152841628417284182841928420284212842228423284242842528426284272842828429284302843128432284332843428435284362843728438284392844028441284422844328444284452844628447284482844928450284512845228453284542845528456284572845828459284602846128462284632846428465284662846728468284692847028471284722847328474284752847628477284782847928480284812848228483284842848528486284872848828489284902849128492284932849428495284962849728498284992850028501285022850328504285052850628507285082850928510285112851228513285142851528516285172851828519285202852128522285232852428525285262852728528285292853028531285322853328534285352853628537285382853928540285412854228543285442854528546285472854828549285502855128552285532855428555285562855728558285592856028561285622856328564285652856628567285682856928570285712857228573285742857528576285772857828579285802858128582285832858428585285862858728588285892859028591285922859328594285952859628597285982859928600286012860228603286042860528606286072860828609286102861128612286132861428615286162861728618286192862028621286222862328624286252862628627286282862928630286312863228633286342863528636286372863828639286402864128642286432864428645286462864728648286492865028651286522865328654286552865628657286582865928660286612866228663286642866528666286672866828669286702867128672286732867428675286762867728678286792868028681286822868328684286852868628687286882868928690286912869228693286942869528696286972869828699287002870128702287032870428705287062870728708287092871028711287122871328714287152871628717287182871928720287212872228723287242872528726287272872828729287302873128732287332873428735287362873728738287392874028741287422874328744287452874628747287482874928750287512875228753287542875528756287572875828759287602876128762287632876428765287662876728768287692877028771287722877328774287752877628777287782877928780287812878228783287842878528786287872878828789287902879128792287932879428795287962879728798287992880028801288022880328804288052880628807288082880928810288112881228813288142881528816288172881828819288202882128822288232882428825288262882728828288292883028831288322883328834288352883628837288382883928840288412884228843288442884528846288472884828849288502885128852288532885428855288562885728858288592886028861288622886328864288652886628867288682886928870288712887228873288742887528876288772887828879288802888128882288832888428885288862888728888288892889028891288922889328894288952889628897288982889928900289012890228903289042890528906289072890828909289102891128912289132891428915289162891728918289192892028921289222892328924289252892628927289282892928930289312893228933289342893528936289372893828939289402894128942289432894428945289462894728948289492895028951289522895328954289552895628957289582895928960289612896228963289642896528966289672896828969289702897128972289732897428975289762897728978289792898028981289822898328984289852898628987289882898928990289912899228993289942899528996289972899828999290002900129002290032900429005290062900729008290092901029011290122901329014290152901629017290182901929020290212902229023290242902529026290272902829029290302903129032290332903429035290362903729038290392904029041290422904329044290452904629047290482904929050290512905229053290542905529056290572905829059290602906129062290632906429065290662906729068290692907029071290722907329074290752907629077290782907929080290812908229083290842908529086290872908829089290902909129092290932909429095290962909729098290992910029101291022910329104291052910629107291082910929110291112911229113291142911529116291172911829119291202912129122291232912429125291262912729128291292913029131291322913329134291352913629137291382913929140291412914229143291442914529146291472914829149291502915129152291532915429155291562915729158291592916029161291622916329164291652916629167291682916929170291712917229173291742917529176291772917829179291802918129182291832918429185291862918729188291892919029191291922919329194291952919629197291982919929200292012920229203292042920529206292072920829209292102921129212292132921429215292162921729218292192922029221292222922329224292252922629227292282922929230292312923229233292342923529236292372923829239292402924129242292432924429245292462924729248292492925029251292522925329254292552925629257292582925929260292612926229263292642926529266292672926829269292702927129272292732927429275292762927729278292792928029281292822928329284292852928629287292882928929290292912929229293292942929529296292972929829299293002930129302293032930429305293062930729308293092931029311293122931329314293152931629317293182931929320293212932229323293242932529326293272932829329293302933129332293332933429335293362933729338293392934029341293422934329344293452934629347293482934929350293512935229353293542935529356293572935829359293602936129362293632936429365293662936729368293692937029371293722937329374293752937629377293782937929380293812938229383293842938529386293872938829389293902939129392293932939429395293962939729398293992940029401294022940329404294052940629407294082940929410294112941229413294142941529416294172941829419294202942129422294232942429425294262942729428294292943029431294322943329434294352943629437294382943929440294412944229443294442944529446294472944829449294502945129452294532945429455294562945729458294592946029461294622946329464294652946629467294682946929470294712947229473294742947529476294772947829479294802948129482294832948429485294862948729488294892949029491294922949329494294952949629497294982949929500295012950229503295042950529506295072950829509295102951129512295132951429515295162951729518295192952029521295222952329524295252952629527295282952929530295312953229533295342953529536295372953829539295402954129542295432954429545295462954729548295492955029551295522955329554295552955629557295582955929560295612956229563295642956529566295672956829569295702957129572295732957429575295762957729578295792958029581295822958329584295852958629587295882958929590295912959229593295942959529596295972959829599296002960129602296032960429605296062960729608296092961029611296122961329614296152961629617296182961929620296212962229623296242962529626296272962829629296302963129632296332963429635296362963729638296392964029641296422964329644296452964629647296482964929650296512965229653296542965529656296572965829659296602966129662296632966429665296662966729668296692967029671296722967329674296752967629677296782967929680296812968229683296842968529686296872968829689296902969129692296932969429695296962969729698296992970029701297022970329704297052970629707297082970929710297112971229713297142971529716297172971829719297202972129722297232972429725297262972729728297292973029731297322973329734297352973629737297382973929740297412974229743297442974529746297472974829749297502975129752297532975429755297562975729758297592976029761297622976329764297652976629767297682976929770297712977229773297742977529776297772977829779297802978129782297832978429785297862978729788297892979029791297922979329794297952979629797297982979929800298012980229803298042980529806298072980829809298102981129812298132981429815298162981729818298192982029821298222982329824298252982629827298282982929830298312983229833298342983529836298372983829839298402984129842298432984429845298462984729848298492985029851298522985329854298552985629857298582985929860298612986229863298642986529866298672986829869298702987129872298732987429875298762987729878298792988029881298822988329884298852988629887298882988929890298912989229893298942989529896298972989829899299002990129902299032990429905299062990729908299092991029911299122991329914299152991629917299182991929920299212992229923299242992529926299272992829929299302993129932299332993429935299362993729938299392994029941299422994329944299452994629947299482994929950299512995229953299542995529956299572995829959299602996129962299632996429965299662996729968299692997029971299722997329974299752997629977299782997929980299812998229983299842998529986299872998829989299902999129992299932999429995299962999729998299993000030001300023000330004300053000630007300083000930010300113001230013300143001530016300173001830019300203002130022300233002430025300263002730028300293003030031300323003330034300353003630037300383003930040300413004230043300443004530046300473004830049300503005130052300533005430055300563005730058300593006030061300623006330064300653006630067300683006930070300713007230073300743007530076300773007830079300803008130082300833008430085300863008730088300893009030091300923009330094300953009630097300983009930100301013010230103301043010530106301073010830109301103011130112301133011430115301163011730118301193012030121301223012330124301253012630127301283012930130301313013230133301343013530136301373013830139301403014130142301433014430145301463014730148301493015030151301523015330154301553015630157301583015930160301613016230163301643016530166301673016830169301703017130172301733017430175301763017730178301793018030181301823018330184301853018630187301883018930190301913019230193301943019530196301973019830199302003020130202302033020430205302063020730208302093021030211302123021330214302153021630217302183021930220302213022230223302243022530226302273022830229302303023130232302333023430235302363023730238302393024030241302423024330244302453024630247302483024930250302513025230253302543025530256302573025830259302603026130262302633026430265302663026730268302693027030271302723027330274302753027630277302783027930280302813028230283302843028530286302873028830289302903029130292302933029430295302963029730298302993030030301303023030330304303053030630307303083030930310303113031230313303143031530316303173031830319303203032130322303233032430325303263032730328303293033030331303323033330334303353033630337303383033930340303413034230343303443034530346303473034830349303503035130352303533035430355303563035730358303593036030361303623036330364303653036630367303683036930370303713037230373303743037530376303773037830379303803038130382303833038430385303863038730388303893039030391303923039330394303953039630397303983039930400304013040230403304043040530406304073040830409304103041130412304133041430415304163041730418304193042030421304223042330424304253042630427304283042930430304313043230433304343043530436304373043830439304403044130442304433044430445304463044730448304493045030451304523045330454304553045630457304583045930460304613046230463304643046530466304673046830469304703047130472304733047430475304763047730478304793048030481304823048330484304853048630487304883048930490304913049230493304943049530496304973049830499305003050130502305033050430505305063050730508305093051030511305123051330514305153051630517305183051930520305213052230523305243052530526305273052830529305303053130532305333053430535305363053730538305393054030541305423054330544305453054630547305483054930550305513055230553305543055530556305573055830559305603056130562305633056430565305663056730568305693057030571305723057330574305753057630577305783057930580305813058230583305843058530586305873058830589305903059130592305933059430595305963059730598305993060030601306023060330604306053060630607306083060930610306113061230613306143061530616306173061830619306203062130622306233062430625306263062730628306293063030631306323063330634306353063630637306383063930640306413064230643306443064530646306473064830649306503065130652306533065430655306563065730658306593066030661306623066330664306653066630667306683066930670306713067230673306743067530676306773067830679306803068130682306833068430685306863068730688306893069030691306923069330694306953069630697306983069930700307013070230703307043070530706307073070830709307103071130712307133071430715307163071730718307193072030721307223072330724307253072630727307283072930730307313073230733307343073530736307373073830739307403074130742307433074430745307463074730748307493075030751307523075330754307553075630757307583075930760307613076230763307643076530766307673076830769307703077130772307733077430775307763077730778307793078030781307823078330784307853078630787307883078930790307913079230793307943079530796307973079830799308003080130802308033080430805308063080730808308093081030811308123081330814308153081630817308183081930820308213082230823308243082530826308273082830829308303083130832308333083430835308363083730838308393084030841308423084330844308453084630847308483084930850308513085230853308543085530856308573085830859308603086130862308633086430865308663086730868308693087030871308723087330874308753087630877308783087930880308813088230883308843088530886308873088830889308903089130892308933089430895308963089730898308993090030901309023090330904309053090630907309083090930910309113091230913309143091530916309173091830919309203092130922309233092430925309263092730928309293093030931309323093330934309353093630937309383093930940309413094230943309443094530946309473094830949309503095130952309533095430955309563095730958309593096030961309623096330964309653096630967309683096930970309713097230973309743097530976309773097830979309803098130982309833098430985309863098730988309893099030991309923099330994309953099630997309983099931000310013100231003310043100531006310073100831009310103101131012310133101431015310163101731018310193102031021310223102331024310253102631027310283102931030310313103231033310343103531036310373103831039310403104131042310433104431045310463104731048310493105031051310523105331054310553105631057310583105931060310613106231063310643106531066310673106831069310703107131072310733107431075310763107731078310793108031081310823108331084310853108631087310883108931090310913109231093310943109531096310973109831099311003110131102311033110431105311063110731108311093111031111311123111331114311153111631117311183111931120311213112231123311243112531126311273112831129311303113131132311333113431135311363113731138311393114031141311423114331144311453114631147311483114931150311513115231153311543115531156311573115831159311603116131162311633116431165311663116731168311693117031171311723117331174311753117631177311783117931180311813118231183311843118531186311873118831189311903119131192311933119431195311963119731198311993120031201312023120331204312053120631207312083120931210312113121231213312143121531216312173121831219312203122131222312233122431225312263122731228312293123031231312323123331234312353123631237312383123931240312413124231243312443124531246312473124831249312503125131252312533125431255312563125731258312593126031261312623126331264312653126631267312683126931270312713127231273312743127531276312773127831279312803128131282312833128431285312863128731288312893129031291312923129331294312953129631297312983129931300313013130231303313043130531306313073130831309313103131131312313133131431315313163131731318313193132031321313223132331324313253132631327313283132931330313313133231333313343133531336313373133831339313403134131342313433134431345313463134731348313493135031351313523135331354313553135631357313583135931360313613136231363313643136531366313673136831369313703137131372313733137431375313763137731378313793138031381313823138331384313853138631387313883138931390313913139231393313943139531396313973139831399314003140131402314033140431405314063140731408314093141031411314123141331414314153141631417314183141931420314213142231423314243142531426314273142831429314303143131432314333143431435314363143731438314393144031441314423144331444314453144631447314483144931450314513145231453314543145531456314573145831459314603146131462314633146431465314663146731468314693147031471314723147331474314753147631477314783147931480314813148231483314843148531486314873148831489314903149131492314933149431495314963149731498314993150031501315023150331504315053150631507315083150931510315113151231513315143151531516315173151831519315203152131522315233152431525315263152731528315293153031531315323153331534315353153631537315383153931540315413154231543315443154531546315473154831549315503155131552315533155431555315563155731558315593156031561315623156331564315653156631567315683156931570315713157231573315743157531576315773157831579315803158131582315833158431585315863158731588315893159031591315923159331594315953159631597315983159931600316013160231603316043160531606316073160831609316103161131612316133161431615316163161731618316193162031621316223162331624316253162631627316283162931630316313163231633316343163531636316373163831639316403164131642316433164431645316463164731648316493165031651316523165331654316553165631657316583165931660316613166231663316643166531666316673166831669316703167131672316733167431675316763167731678316793168031681316823168331684316853168631687316883168931690316913169231693316943169531696316973169831699317003170131702317033170431705317063170731708317093171031711317123171331714317153171631717317183171931720317213172231723317243172531726317273172831729317303173131732317333173431735317363173731738317393174031741317423174331744317453174631747317483174931750317513175231753317543175531756317573175831759317603176131762317633176431765317663176731768317693177031771317723177331774317753177631777317783177931780317813178231783317843178531786317873178831789317903179131792317933179431795317963179731798317993180031801318023180331804318053180631807318083180931810318113181231813318143181531816318173181831819318203182131822318233182431825318263182731828318293183031831318323183331834318353183631837318383183931840318413184231843318443184531846318473184831849318503185131852318533185431855318563185731858318593186031861318623186331864318653186631867318683186931870318713187231873318743187531876318773187831879318803188131882318833188431885318863188731888318893189031891318923189331894318953189631897318983189931900319013190231903319043190531906319073190831909319103191131912319133191431915319163191731918319193192031921319223192331924319253192631927319283192931930319313193231933319343193531936319373193831939319403194131942319433194431945319463194731948319493195031951319523195331954319553195631957319583195931960319613196231963319643196531966319673196831969319703197131972319733197431975319763197731978319793198031981319823198331984319853198631987319883198931990319913199231993319943199531996319973199831999320003200132002320033200432005320063200732008320093201032011320123201332014320153201632017320183201932020320213202232023320243202532026320273202832029320303203132032320333203432035320363203732038320393204032041320423204332044320453204632047320483204932050320513205232053320543205532056320573205832059320603206132062320633206432065320663206732068320693207032071320723207332074320753207632077320783207932080320813208232083320843208532086320873208832089320903209132092320933209432095320963209732098320993210032101321023210332104321053210632107321083210932110321113211232113321143211532116321173211832119321203212132122321233212432125321263212732128321293213032131321323213332134321353213632137321383213932140321413214232143321443214532146321473214832149321503215132152321533215432155321563215732158321593216032161321623216332164321653216632167321683216932170321713217232173321743217532176321773217832179321803218132182321833218432185321863218732188321893219032191321923219332194321953219632197321983219932200322013220232203322043220532206322073220832209322103221132212322133221432215322163221732218322193222032221322223222332224322253222632227322283222932230322313223232233322343223532236322373223832239322403224132242322433224432245322463224732248322493225032251322523225332254322553225632257322583225932260322613226232263322643226532266322673226832269322703227132272322733227432275322763227732278322793228032281322823228332284322853228632287322883228932290322913229232293322943229532296322973229832299323003230132302323033230432305323063230732308323093231032311323123231332314323153231632317323183231932320323213232232323323243232532326323273232832329323303233132332323333233432335323363233732338323393234032341323423234332344323453234632347323483234932350323513235232353323543235532356323573235832359323603236132362323633236432365323663236732368323693237032371323723237332374323753237632377323783237932380323813238232383323843238532386323873238832389323903239132392323933239432395323963239732398323993240032401324023240332404324053240632407324083240932410324113241232413324143241532416324173241832419324203242132422324233242432425324263242732428324293243032431324323243332434324353243632437324383243932440324413244232443324443244532446324473244832449324503245132452324533245432455324563245732458324593246032461324623246332464324653246632467324683246932470324713247232473324743247532476324773247832479324803248132482324833248432485324863248732488324893249032491324923249332494324953249632497324983249932500325013250232503325043250532506325073250832509325103251132512325133251432515325163251732518325193252032521325223252332524325253252632527325283252932530325313253232533325343253532536325373253832539325403254132542325433254432545325463254732548325493255032551325523255332554325553255632557325583255932560325613256232563325643256532566325673256832569325703257132572325733257432575325763257732578325793258032581325823258332584325853258632587325883258932590325913259232593325943259532596325973259832599326003260132602326033260432605326063260732608326093261032611326123261332614326153261632617326183261932620326213262232623326243262532626326273262832629326303263132632326333263432635326363263732638326393264032641326423264332644326453264632647326483264932650326513265232653326543265532656326573265832659326603266132662326633266432665326663266732668326693267032671326723267332674326753267632677326783267932680326813268232683326843268532686326873268832689326903269132692326933269432695326963269732698326993270032701327023270332704327053270632707327083270932710327113271232713327143271532716327173271832719327203272132722327233272432725327263272732728327293273032731327323273332734327353273632737327383273932740327413274232743327443274532746327473274832749327503275132752327533275432755327563275732758327593276032761327623276332764327653276632767327683276932770327713277232773327743277532776327773277832779327803278132782327833278432785327863278732788327893279032791327923279332794327953279632797327983279932800328013280232803328043280532806328073280832809328103281132812328133281432815328163281732818328193282032821328223282332824328253282632827328283282932830328313283232833328343283532836328373283832839328403284132842328433284432845328463284732848328493285032851328523285332854328553285632857328583285932860328613286232863328643286532866328673286832869328703287132872328733287432875328763287732878328793288032881328823288332884328853288632887328883288932890328913289232893328943289532896328973289832899329003290132902329033290432905329063290732908329093291032911329123291332914329153291632917329183291932920329213292232923329243292532926329273292832929329303293132932329333293432935329363293732938329393294032941329423294332944329453294632947329483294932950329513295232953329543295532956329573295832959329603296132962329633296432965329663296732968329693297032971329723297332974329753297632977329783297932980329813298232983329843298532986329873298832989329903299132992329933299432995329963299732998329993300033001330023300333004330053300633007330083300933010330113301233013330143301533016330173301833019330203302133022330233302433025330263302733028330293303033031330323303333034330353303633037330383303933040330413304233043330443304533046330473304833049330503305133052330533305433055330563305733058330593306033061330623306333064330653306633067330683306933070330713307233073330743307533076330773307833079330803308133082330833308433085330863308733088330893309033091330923309333094330953309633097330983309933100331013310233103331043310533106331073310833109331103311133112331133311433115331163311733118331193312033121331223312333124331253312633127331283312933130331313313233133331343313533136331373313833139331403314133142331433314433145331463314733148331493315033151331523315333154331553315633157331583315933160331613316233163331643316533166331673316833169331703317133172331733317433175331763317733178331793318033181331823318333184331853318633187331883318933190331913319233193331943319533196331973319833199332003320133202332033320433205332063320733208332093321033211332123321333214332153321633217332183321933220332213322233223332243322533226332273322833229332303323133232332333323433235332363323733238332393324033241332423324333244332453324633247332483324933250332513325233253332543325533256332573325833259332603326133262332633326433265332663326733268332693327033271332723327333274332753327633277332783327933280332813328233283332843328533286332873328833289332903329133292332933329433295332963329733298332993330033301333023330333304333053330633307333083330933310333113331233313333143331533316333173331833319333203332133322333233332433325333263332733328333293333033331333323333333334333353333633337333383333933340333413334233343333443334533346333473334833349333503335133352333533335433355333563335733358333593336033361333623336333364333653336633367333683336933370333713337233373333743337533376333773337833379333803338133382333833338433385333863338733388333893339033391333923339333394333953339633397333983339933400334013340233403334043340533406334073340833409334103341133412334133341433415334163341733418334193342033421334223342333424334253342633427334283342933430334313343233433334343343533436334373343833439334403344133442334433344433445334463344733448334493345033451334523345333454334553345633457334583345933460334613346233463334643346533466334673346833469334703347133472334733347433475334763347733478334793348033481334823348333484334853348633487334883348933490334913349233493334943349533496334973349833499335003350133502335033350433505335063350733508335093351033511335123351333514335153351633517335183351933520335213352233523335243352533526335273352833529335303353133532335333353433535335363353733538335393354033541335423354333544335453354633547335483354933550335513355233553335543355533556335573355833559335603356133562335633356433565335663356733568335693357033571335723357333574335753357633577335783357933580335813358233583335843358533586335873358833589335903359133592335933359433595335963359733598335993360033601336023360333604336053360633607336083360933610336113361233613336143361533616336173361833619336203362133622336233362433625336263362733628336293363033631336323363333634336353363633637336383363933640336413364233643336443364533646336473364833649336503365133652336533365433655336563365733658336593366033661336623366333664336653366633667336683366933670336713367233673336743367533676336773367833679336803368133682336833368433685336863368733688336893369033691336923369333694336953369633697336983369933700337013370233703337043370533706337073370833709337103371133712337133371433715337163371733718337193372033721337223372333724337253372633727337283372933730337313373233733337343373533736337373373833739337403374133742337433374433745337463374733748337493375033751337523375333754337553375633757337583375933760337613376233763337643376533766337673376833769337703377133772337733377433775337763377733778337793378033781337823378333784337853378633787337883378933790337913379233793337943379533796337973379833799338003380133802338033380433805338063380733808338093381033811338123381333814338153381633817338183381933820338213382233823338243382533826338273382833829338303383133832338333383433835338363383733838338393384033841338423384333844338453384633847338483384933850338513385233853338543385533856338573385833859338603386133862338633386433865338663386733868338693387033871338723387333874338753387633877338783387933880338813388233883338843388533886338873388833889338903389133892338933389433895338963389733898338993390033901339023390333904339053390633907339083390933910339113391233913339143391533916339173391833919339203392133922339233392433925339263392733928339293393033931339323393333934339353393633937339383393933940339413394233943339443394533946339473394833949339503395133952339533395433955339563395733958339593396033961339623396333964339653396633967339683396933970339713397233973339743397533976339773397833979339803398133982339833398433985339863398733988339893399033991339923399333994339953399633997339983399934000340013400234003340043400534006340073400834009340103401134012340133401434015340163401734018340193402034021340223402334024340253402634027340283402934030340313403234033340343403534036340373403834039340403404134042340433404434045340463404734048340493405034051340523405334054340553405634057340583405934060340613406234063340643406534066340673406834069340703407134072340733407434075340763407734078340793408034081340823408334084340853408634087340883408934090340913409234093340943409534096340973409834099341003410134102341033410434105341063410734108341093411034111341123411334114341153411634117341183411934120341213412234123341243412534126341273412834129341303413134132341333413434135341363413734138341393414034141341423414334144341453414634147341483414934150341513415234153341543415534156341573415834159341603416134162341633416434165341663416734168341693417034171341723417334174341753417634177341783417934180341813418234183341843418534186341873418834189341903419134192341933419434195341963419734198341993420034201342023420334204342053420634207342083420934210342113421234213342143421534216342173421834219342203422134222342233422434225342263422734228342293423034231342323423334234342353423634237342383423934240342413424234243342443424534246342473424834249342503425134252342533425434255342563425734258342593426034261342623426334264342653426634267342683426934270342713427234273342743427534276342773427834279342803428134282342833428434285342863428734288342893429034291342923429334294342953429634297342983429934300343013430234303343043430534306343073430834309343103431134312343133431434315343163431734318343193432034321343223432334324343253432634327343283432934330343313433234333343343433534336343373433834339343403434134342343433434434345343463434734348343493435034351343523435334354343553435634357343583435934360343613436234363343643436534366343673436834369343703437134372343733437434375343763437734378343793438034381343823438334384343853438634387343883438934390343913439234393343943439534396343973439834399344003440134402344033440434405344063440734408344093441034411344123441334414344153441634417344183441934420344213442234423344243442534426344273442834429344303443134432344333443434435344363443734438344393444034441344423444334444344453444634447344483444934450344513445234453344543445534456344573445834459344603446134462344633446434465344663446734468344693447034471344723447334474344753447634477344783447934480344813448234483344843448534486344873448834489344903449134492344933449434495344963449734498344993450034501345023450334504345053450634507345083450934510345113451234513345143451534516345173451834519345203452134522345233452434525345263452734528345293453034531345323453334534345353453634537345383453934540345413454234543345443454534546345473454834549345503455134552345533455434555345563455734558345593456034561345623456334564345653456634567345683456934570345713457234573345743457534576345773457834579345803458134582345833458434585345863458734588345893459034591345923459334594345953459634597345983459934600346013460234603346043460534606346073460834609346103461134612346133461434615346163461734618346193462034621346223462334624346253462634627346283462934630346313463234633346343463534636346373463834639346403464134642346433464434645346463464734648346493465034651346523465334654346553465634657346583465934660346613466234663346643466534666346673466834669346703467134672346733467434675346763467734678346793468034681346823468334684346853468634687346883468934690346913469234693346943469534696346973469834699347003470134702347033470434705347063470734708347093471034711347123471334714347153471634717347183471934720347213472234723347243472534726347273472834729347303473134732347333473434735347363473734738347393474034741347423474334744347453474634747347483474934750347513475234753347543475534756347573475834759347603476134762347633476434765347663476734768347693477034771347723477334774347753477634777347783477934780347813478234783347843478534786347873478834789347903479134792347933479434795347963479734798347993480034801348023480334804348053480634807348083480934810348113481234813348143481534816348173481834819348203482134822348233482434825348263482734828348293483034831348323483334834348353483634837348383483934840348413484234843348443484534846348473484834849348503485134852348533485434855348563485734858348593486034861348623486334864348653486634867348683486934870348713487234873348743487534876348773487834879348803488134882348833488434885348863488734888348893489034891348923489334894348953489634897348983489934900349013490234903349043490534906349073490834909349103491134912349133491434915349163491734918349193492034921349223492334924349253492634927349283492934930349313493234933349343493534936349373493834939349403494134942349433494434945349463494734948349493495034951349523495334954349553495634957349583495934960349613496234963349643496534966349673496834969349703497134972349733497434975349763497734978349793498034981349823498334984349853498634987349883498934990349913499234993349943499534996349973499834999350003500135002350033500435005350063500735008350093501035011350123501335014350153501635017350183501935020350213502235023350243502535026350273502835029350303503135032350333503435035350363503735038350393504035041350423504335044350453504635047350483504935050350513505235053350543505535056350573505835059350603506135062350633506435065350663506735068350693507035071350723507335074350753507635077350783507935080350813508235083350843508535086350873508835089350903509135092350933509435095350963509735098350993510035101351023510335104351053510635107351083510935110351113511235113351143511535116351173511835119351203512135122351233512435125351263512735128351293513035131351323513335134351353513635137351383513935140351413514235143351443514535146351473514835149351503515135152351533515435155351563515735158351593516035161351623516335164351653516635167351683516935170351713517235173351743517535176351773517835179351803518135182351833518435185351863518735188351893519035191351923519335194351953519635197351983519935200352013520235203352043520535206352073520835209352103521135212352133521435215352163521735218352193522035221352223522335224352253522635227352283522935230352313523235233352343523535236352373523835239352403524135242352433524435245352463524735248352493525035251352523525335254352553525635257352583525935260352613526235263352643526535266352673526835269352703527135272352733527435275352763527735278352793528035281352823528335284352853528635287352883528935290352913529235293352943529535296352973529835299353003530135302353033530435305353063530735308353093531035311353123531335314353153531635317353183531935320353213532235323353243532535326353273532835329353303533135332353333533435335353363533735338353393534035341353423534335344353453534635347353483534935350353513535235353353543535535356353573535835359353603536135362353633536435365353663536735368353693537035371353723537335374353753537635377353783537935380353813538235383353843538535386353873538835389353903539135392353933539435395353963539735398353993540035401354023540335404354053540635407354083540935410354113541235413354143541535416354173541835419354203542135422354233542435425354263542735428354293543035431354323543335434354353543635437354383543935440354413544235443354443544535446354473544835449354503545135452354533545435455354563545735458354593546035461354623546335464354653546635467354683546935470354713547235473354743547535476354773547835479354803548135482354833548435485354863548735488354893549035491354923549335494354953549635497354983549935500355013550235503355043550535506355073550835509355103551135512355133551435515355163551735518355193552035521355223552335524355253552635527355283552935530355313553235533355343553535536355373553835539355403554135542355433554435545355463554735548355493555035551355523555335554355553555635557355583555935560355613556235563355643556535566355673556835569355703557135572355733557435575355763557735578355793558035581355823558335584355853558635587355883558935590355913559235593355943559535596355973559835599356003560135602356033560435605356063560735608356093561035611356123561335614356153561635617356183561935620356213562235623356243562535626356273562835629356303563135632356333563435635356363563735638356393564035641356423564335644356453564635647356483564935650356513565235653356543565535656356573565835659356603566135662356633566435665356663566735668356693567035671356723567335674356753567635677356783567935680356813568235683356843568535686356873568835689356903569135692356933569435695356963569735698356993570035701357023570335704357053570635707357083570935710357113571235713357143571535716357173571835719357203572135722357233572435725357263572735728357293573035731357323573335734357353573635737357383573935740357413574235743357443574535746357473574835749357503575135752357533575435755357563575735758357593576035761357623576335764357653576635767357683576935770357713577235773357743577535776357773577835779357803578135782357833578435785357863578735788357893579035791357923579335794357953579635797357983579935800358013580235803358043580535806358073580835809358103581135812358133581435815358163581735818358193582035821358223582335824358253582635827358283582935830358313583235833358343583535836358373583835839358403584135842358433584435845358463584735848358493585035851358523585335854358553585635857358583585935860358613586235863358643586535866358673586835869358703587135872358733587435875358763587735878358793588035881358823588335884358853588635887358883588935890358913589235893358943589535896358973589835899359003590135902359033590435905359063590735908359093591035911359123591335914359153591635917359183591935920359213592235923359243592535926359273592835929359303593135932359333593435935359363593735938359393594035941359423594335944359453594635947359483594935950359513595235953359543595535956359573595835959359603596135962359633596435965359663596735968359693597035971359723597335974359753597635977359783597935980359813598235983359843598535986359873598835989359903599135992359933599435995359963599735998359993600036001360023600336004360053600636007360083600936010360113601236013360143601536016360173601836019360203602136022360233602436025360263602736028360293603036031360323603336034360353603636037360383603936040360413604236043360443604536046360473604836049360503605136052360533605436055360563605736058360593606036061360623606336064360653606636067360683606936070360713607236073360743607536076360773607836079360803608136082360833608436085360863608736088360893609036091360923609336094360953609636097360983609936100361013610236103361043610536106361073610836109361103611136112361133611436115361163611736118361193612036121361223612336124361253612636127361283612936130361313613236133361343613536136361373613836139361403614136142361433614436145361463614736148361493615036151361523615336154361553615636157361583615936160361613616236163361643616536166361673616836169361703617136172361733617436175361763617736178361793618036181361823618336184361853618636187361883618936190361913619236193361943619536196361973619836199362003620136202362033620436205362063620736208362093621036211362123621336214362153621636217362183621936220362213622236223362243622536226362273622836229362303623136232362333623436235362363623736238362393624036241362423624336244362453624636247362483624936250362513625236253362543625536256362573625836259362603626136262362633626436265362663626736268362693627036271362723627336274362753627636277362783627936280362813628236283362843628536286362873628836289362903629136292362933629436295362963629736298362993630036301363023630336304363053630636307363083630936310363113631236313363143631536316363173631836319363203632136322363233632436325363263632736328363293633036331363323633336334363353633636337363383633936340363413634236343363443634536346363473634836349363503635136352363533635436355363563635736358363593636036361363623636336364363653636636367363683636936370363713637236373363743637536376363773637836379363803638136382363833638436385363863638736388363893639036391363923639336394363953639636397363983639936400364013640236403364043640536406364073640836409364103641136412364133641436415364163641736418364193642036421364223642336424364253642636427364283642936430364313643236433364343643536436364373643836439364403644136442364433644436445364463644736448364493645036451364523645336454364553645636457364583645936460364613646236463364643646536466364673646836469364703647136472364733647436475364763647736478364793648036481364823648336484364853648636487364883648936490364913649236493364943649536496364973649836499365003650136502365033650436505365063650736508365093651036511365123651336514365153651636517365183651936520365213652236523365243652536526365273652836529365303653136532365333653436535365363653736538365393654036541365423654336544365453654636547365483654936550365513655236553365543655536556365573655836559365603656136562365633656436565365663656736568365693657036571365723657336574365753657636577365783657936580365813658236583365843658536586365873658836589365903659136592365933659436595365963659736598365993660036601366023660336604366053660636607366083660936610366113661236613366143661536616366173661836619366203662136622366233662436625366263662736628366293663036631366323663336634366353663636637366383663936640366413664236643366443664536646366473664836649366503665136652366533665436655366563665736658366593666036661366623666336664366653666636667366683666936670366713667236673366743667536676366773667836679366803668136682366833668436685366863668736688366893669036691366923669336694366953669636697366983669936700367013670236703367043670536706367073670836709367103671136712367133671436715367163671736718367193672036721367223672336724367253672636727367283672936730367313673236733367343673536736367373673836739367403674136742367433674436745367463674736748367493675036751367523675336754367553675636757367583675936760367613676236763367643676536766367673676836769367703677136772367733677436775367763677736778367793678036781367823678336784367853678636787367883678936790367913679236793367943679536796367973679836799368003680136802368033680436805368063680736808368093681036811368123681336814368153681636817368183681936820368213682236823368243682536826368273682836829368303683136832368333683436835368363683736838368393684036841368423684336844368453684636847368483684936850368513685236853368543685536856368573685836859368603686136862368633686436865368663686736868368693687036871368723687336874368753687636877368783687936880368813688236883368843688536886368873688836889368903689136892368933689436895368963689736898368993690036901369023690336904369053690636907369083690936910369113691236913369143691536916369173691836919369203692136922369233692436925369263692736928369293693036931369323693336934369353693636937369383693936940369413694236943369443694536946369473694836949369503695136952369533695436955369563695736958369593696036961369623696336964369653696636967369683696936970369713697236973369743697536976369773697836979369803698136982369833698436985369863698736988369893699036991369923699336994369953699636997369983699937000370013700237003370043700537006370073700837009370103701137012370133701437015370163701737018370193702037021370223702337024370253702637027370283702937030370313703237033370343703537036370373703837039370403704137042370433704437045370463704737048370493705037051370523705337054370553705637057370583705937060370613706237063370643706537066370673706837069370703707137072370733707437075370763707737078370793708037081370823708337084370853708637087370883708937090370913709237093370943709537096370973709837099371003710137102371033710437105371063710737108371093711037111371123711337114371153711637117371183711937120371213712237123371243712537126371273712837129371303713137132371333713437135371363713737138371393714037141371423714337144371453714637147371483714937150371513715237153371543715537156371573715837159371603716137162371633716437165371663716737168371693717037171371723717337174371753717637177371783717937180371813718237183371843718537186371873718837189371903719137192371933719437195371963719737198371993720037201372023720337204372053720637207372083720937210372113721237213372143721537216372173721837219372203722137222372233722437225372263722737228372293723037231372323723337234372353723637237372383723937240372413724237243372443724537246372473724837249372503725137252372533725437255372563725737258372593726037261372623726337264372653726637267372683726937270372713727237273372743727537276372773727837279372803728137282372833728437285372863728737288372893729037291372923729337294372953729637297372983729937300373013730237303373043730537306373073730837309373103731137312373133731437315373163731737318373193732037321373223732337324373253732637327373283732937330373313733237333373343733537336373373733837339373403734137342373433734437345373463734737348373493735037351373523735337354373553735637357373583735937360373613736237363373643736537366373673736837369373703737137372373733737437375373763737737378373793738037381373823738337384373853738637387373883738937390373913739237393373943739537396373973739837399374003740137402374033740437405374063740737408374093741037411374123741337414374153741637417374183741937420374213742237423374243742537426374273742837429374303743137432374333743437435374363743737438374393744037441374423744337444374453744637447374483744937450374513745237453374543745537456374573745837459374603746137462374633746437465374663746737468374693747037471374723747337474374753747637477374783747937480374813748237483374843748537486374873748837489374903749137492374933749437495374963749737498374993750037501375023750337504375053750637507375083750937510375113751237513375143751537516375173751837519375203752137522375233752437525375263752737528375293753037531375323753337534375353753637537375383753937540375413754237543375443754537546375473754837549375503755137552375533755437555375563755737558375593756037561375623756337564375653756637567375683756937570375713757237573375743757537576375773757837579375803758137582375833758437585375863758737588375893759037591375923759337594375953759637597375983759937600376013760237603376043760537606376073760837609376103761137612376133761437615376163761737618376193762037621376223762337624376253762637627376283762937630376313763237633376343763537636376373763837639376403764137642376433764437645376463764737648376493765037651376523765337654376553765637657376583765937660376613766237663376643766537666376673766837669376703767137672376733767437675376763767737678376793768037681376823768337684376853768637687376883768937690376913769237693376943769537696376973769837699377003770137702377033770437705377063770737708377093771037711377123771337714377153771637717377183771937720377213772237723377243772537726377273772837729377303773137732377333773437735377363773737738377393774037741377423774337744377453774637747377483774937750377513775237753377543775537756377573775837759377603776137762377633776437765377663776737768377693777037771377723777337774377753777637777377783777937780377813778237783377843778537786377873778837789377903779137792377933779437795377963779737798377993780037801378023780337804378053780637807378083780937810378113781237813378143781537816378173781837819378203782137822378233782437825378263782737828378293783037831378323783337834378353783637837378383783937840378413784237843378443784537846378473784837849378503785137852378533785437855378563785737858378593786037861378623786337864378653786637867378683786937870378713787237873378743787537876378773787837879378803788137882378833788437885378863788737888378893789037891378923789337894378953789637897378983789937900379013790237903379043790537906379073790837909379103791137912379133791437915379163791737918379193792037921379223792337924379253792637927379283792937930379313793237933379343793537936379373793837939379403794137942379433794437945379463794737948379493795037951379523795337954379553795637957379583795937960379613796237963379643796537966379673796837969379703797137972379733797437975379763797737978379793798037981379823798337984379853798637987379883798937990379913799237993379943799537996379973799837999380003800138002380033800438005380063800738008380093801038011380123801338014380153801638017380183801938020380213802238023380243802538026380273802838029380303803138032380333803438035380363803738038380393804038041380423804338044380453804638047380483804938050380513805238053380543805538056380573805838059380603806138062380633806438065380663806738068380693807038071380723807338074380753807638077380783807938080380813808238083380843808538086380873808838089380903809138092380933809438095380963809738098380993810038101381023810338104381053810638107381083810938110381113811238113381143811538116381173811838119381203812138122381233812438125381263812738128381293813038131381323813338134381353813638137381383813938140381413814238143381443814538146381473814838149381503815138152381533815438155381563815738158381593816038161381623816338164381653816638167381683816938170381713817238173381743817538176381773817838179381803818138182381833818438185381863818738188381893819038191381923819338194381953819638197381983819938200382013820238203382043820538206382073820838209382103821138212382133821438215382163821738218382193822038221382223822338224382253822638227382283822938230382313823238233382343823538236382373823838239382403824138242382433824438245382463824738248382493825038251382523825338254382553825638257382583825938260382613826238263382643826538266382673826838269382703827138272382733827438275382763827738278382793828038281382823828338284382853828638287382883828938290382913829238293382943829538296382973829838299383003830138302383033830438305383063830738308383093831038311383123831338314383153831638317383183831938320383213832238323383243832538326383273832838329383303833138332383333833438335383363833738338383393834038341383423834338344383453834638347383483834938350383513835238353383543835538356383573835838359383603836138362383633836438365383663836738368383693837038371383723837338374383753837638377383783837938380383813838238383383843838538386383873838838389383903839138392383933839438395383963839738398383993840038401384023840338404384053840638407384083840938410384113841238413384143841538416384173841838419384203842138422384233842438425384263842738428384293843038431384323843338434384353843638437384383843938440384413844238443384443844538446384473844838449384503845138452384533845438455384563845738458384593846038461384623846338464384653846638467384683846938470384713847238473384743847538476384773847838479384803848138482384833848438485384863848738488384893849038491384923849338494384953849638497384983849938500385013850238503385043850538506385073850838509385103851138512385133851438515385163851738518385193852038521385223852338524385253852638527385283852938530385313853238533385343853538536385373853838539385403854138542385433854438545385463854738548385493855038551385523855338554385553855638557385583855938560385613856238563385643856538566385673856838569385703857138572385733857438575385763857738578385793858038581385823858338584385853858638587385883858938590385913859238593385943859538596385973859838599386003860138602386033860438605386063860738608386093861038611386123861338614386153861638617386183861938620386213862238623386243862538626386273862838629386303863138632386333863438635386363863738638386393864038641386423864338644386453864638647386483864938650386513865238653386543865538656386573865838659386603866138662386633866438665386663866738668386693867038671386723867338674386753867638677386783867938680386813868238683386843868538686386873868838689386903869138692386933869438695386963869738698386993870038701387023870338704387053870638707387083870938710387113871238713387143871538716387173871838719387203872138722387233872438725387263872738728387293873038731387323873338734387353873638737387383873938740387413874238743387443874538746387473874838749387503875138752387533875438755387563875738758387593876038761387623876338764387653876638767387683876938770387713877238773387743877538776387773877838779387803878138782387833878438785387863878738788387893879038791387923879338794387953879638797387983879938800388013880238803388043880538806388073880838809388103881138812388133881438815388163881738818388193882038821388223882338824388253882638827388283882938830388313883238833388343883538836388373883838839388403884138842388433884438845388463884738848388493885038851388523885338854388553885638857388583885938860388613886238863388643886538866388673886838869388703887138872388733887438875388763887738878388793888038881388823888338884388853888638887388883888938890388913889238893388943889538896388973889838899389003890138902389033890438905389063890738908389093891038911389123891338914389153891638917389183891938920389213892238923389243892538926389273892838929389303893138932389333893438935389363893738938389393894038941389423894338944389453894638947389483894938950389513895238953389543895538956389573895838959389603896138962389633896438965389663896738968389693897038971389723897338974389753897638977389783897938980389813898238983389843898538986389873898838989389903899138992389933899438995389963899738998389993900039001390023900339004390053900639007390083900939010390113901239013390143901539016390173901839019390203902139022390233902439025390263902739028390293903039031390323903339034390353903639037390383903939040390413904239043390443904539046390473904839049390503905139052390533905439055390563905739058390593906039061390623906339064390653906639067390683906939070390713907239073390743907539076390773907839079390803908139082390833908439085390863908739088390893909039091390923909339094390953909639097390983909939100391013910239103391043910539106391073910839109391103911139112391133911439115391163911739118391193912039121391223912339124391253912639127391283912939130391313913239133391343913539136391373913839139391403914139142391433914439145391463914739148391493915039151391523915339154391553915639157391583915939160391613916239163391643916539166391673916839169391703917139172391733917439175391763917739178391793918039181391823918339184391853918639187391883918939190391913919239193391943919539196391973919839199392003920139202392033920439205392063920739208392093921039211392123921339214392153921639217392183921939220392213922239223392243922539226392273922839229392303923139232392333923439235392363923739238392393924039241392423924339244392453924639247392483924939250392513925239253392543925539256392573925839259392603926139262392633926439265392663926739268392693927039271392723927339274392753927639277392783927939280392813928239283392843928539286392873928839289392903929139292392933929439295392963929739298392993930039301393023930339304393053930639307393083930939310393113931239313393143931539316393173931839319393203932139322393233932439325393263932739328393293933039331393323933339334393353933639337393383933939340393413934239343393443934539346393473934839349393503935139352393533935439355393563935739358393593936039361393623936339364393653936639367393683936939370393713937239373393743937539376393773937839379393803938139382393833938439385393863938739388393893939039391393923939339394393953939639397393983939939400394013940239403394043940539406394073940839409394103941139412394133941439415394163941739418394193942039421394223942339424394253942639427394283942939430394313943239433394343943539436394373943839439394403944139442394433944439445394463944739448394493945039451394523945339454394553945639457394583945939460394613946239463394643946539466394673946839469394703947139472394733947439475394763947739478394793948039481394823948339484394853948639487394883948939490394913949239493394943949539496394973949839499395003950139502395033950439505395063950739508395093951039511395123951339514395153951639517395183951939520395213952239523395243952539526395273952839529395303953139532395333953439535395363953739538395393954039541395423954339544395453954639547395483954939550395513955239553395543955539556395573955839559395603956139562395633956439565395663956739568395693957039571395723957339574395753957639577395783957939580395813958239583395843958539586395873958839589395903959139592395933959439595395963959739598395993960039601396023960339604396053960639607396083960939610396113961239613396143961539616396173961839619396203962139622396233962439625396263962739628396293963039631396323963339634396353963639637396383963939640396413964239643396443964539646396473964839649396503965139652396533965439655396563965739658396593966039661396623966339664396653966639667396683966939670396713967239673396743967539676396773967839679396803968139682396833968439685396863968739688396893969039691396923969339694396953969639697396983969939700397013970239703397043970539706397073970839709397103971139712397133971439715397163971739718397193972039721397223972339724397253972639727397283972939730397313973239733397343973539736397373973839739397403974139742397433974439745397463974739748397493975039751397523975339754397553975639757397583975939760397613976239763397643976539766397673976839769397703977139772397733977439775397763977739778397793978039781397823978339784397853978639787397883978939790397913979239793397943979539796397973979839799398003980139802398033980439805398063980739808398093981039811398123981339814398153981639817398183981939820398213982239823398243982539826398273982839829398303983139832398333983439835398363983739838398393984039841398423984339844398453984639847398483984939850398513985239853398543985539856398573985839859398603986139862398633986439865398663986739868398693987039871398723987339874398753987639877398783987939880398813988239883398843988539886398873988839889398903989139892398933989439895398963989739898398993990039901399023990339904399053990639907399083990939910399113991239913399143991539916399173991839919399203992139922399233992439925399263992739928399293993039931399323993339934399353993639937399383993939940399413994239943399443994539946399473994839949399503995139952399533995439955399563995739958399593996039961399623996339964399653996639967399683996939970399713997239973399743997539976399773997839979399803998139982399833998439985399863998739988399893999039991399923999339994399953999639997399983999940000400014000240003400044000540006400074000840009400104001140012400134001440015400164001740018400194002040021400224002340024400254002640027400284002940030400314003240033400344003540036400374003840039400404004140042400434004440045400464004740048400494005040051400524005340054400554005640057400584005940060400614006240063400644006540066400674006840069400704007140072400734007440075400764007740078400794008040081400824008340084400854008640087400884008940090400914009240093400944009540096400974009840099401004010140102401034010440105401064010740108401094011040111401124011340114401154011640117401184011940120401214012240123401244012540126401274012840129401304013140132401334013440135401364013740138401394014040141401424014340144401454014640147401484014940150401514015240153401544015540156401574015840159401604016140162401634016440165401664016740168401694017040171401724017340174401754017640177401784017940180401814018240183401844018540186401874018840189401904019140192401934019440195401964019740198401994020040201402024020340204402054020640207402084020940210402114021240213402144021540216402174021840219402204022140222402234022440225402264022740228402294023040231402324023340234402354023640237402384023940240402414024240243402444024540246402474024840249402504025140252402534025440255402564025740258402594026040261402624026340264402654026640267402684026940270402714027240273402744027540276402774027840279402804028140282402834028440285402864028740288402894029040291402924029340294402954029640297402984029940300403014030240303403044030540306403074030840309403104031140312403134031440315403164031740318403194032040321403224032340324403254032640327403284032940330403314033240333403344033540336403374033840339403404034140342403434034440345403464034740348403494035040351403524035340354403554035640357403584035940360403614036240363403644036540366403674036840369403704037140372403734037440375403764037740378403794038040381403824038340384403854038640387403884038940390403914039240393403944039540396403974039840399404004040140402404034040440405404064040740408404094041040411404124041340414404154041640417404184041940420404214042240423404244042540426404274042840429404304043140432404334043440435404364043740438404394044040441404424044340444404454044640447404484044940450404514045240453404544045540456404574045840459404604046140462404634046440465404664046740468404694047040471404724047340474404754047640477404784047940480404814048240483404844048540486404874048840489404904049140492404934049440495404964049740498404994050040501405024050340504405054050640507405084050940510405114051240513405144051540516405174051840519405204052140522405234052440525405264052740528405294053040531405324053340534405354053640537405384053940540405414054240543405444054540546405474054840549405504055140552405534055440555405564055740558405594056040561405624056340564405654056640567405684056940570405714057240573405744057540576405774057840579405804058140582405834058440585405864058740588405894059040591405924059340594405954059640597405984059940600406014060240603406044060540606406074060840609406104061140612406134061440615406164061740618406194062040621406224062340624406254062640627406284062940630406314063240633406344063540636406374063840639406404064140642406434064440645406464064740648406494065040651406524065340654406554065640657406584065940660406614066240663406644066540666406674066840669406704067140672406734067440675406764067740678406794068040681406824068340684406854068640687406884068940690406914069240693406944069540696406974069840699407004070140702407034070440705407064070740708407094071040711407124071340714407154071640717407184071940720407214072240723407244072540726407274072840729407304073140732407334073440735407364073740738407394074040741407424074340744407454074640747407484074940750407514075240753407544075540756407574075840759407604076140762407634076440765407664076740768407694077040771407724077340774407754077640777407784077940780407814078240783407844078540786407874078840789407904079140792407934079440795407964079740798407994080040801408024080340804408054080640807408084080940810408114081240813408144081540816408174081840819408204082140822408234082440825408264082740828408294083040831408324083340834408354083640837408384083940840408414084240843408444084540846408474084840849408504085140852408534085440855408564085740858408594086040861408624086340864408654086640867408684086940870408714087240873408744087540876408774087840879408804088140882408834088440885408864088740888408894089040891408924089340894408954089640897408984089940900409014090240903409044090540906409074090840909409104091140912409134091440915409164091740918409194092040921409224092340924409254092640927409284092940930409314093240933409344093540936409374093840939409404094140942409434094440945409464094740948409494095040951409524095340954409554095640957409584095940960409614096240963409644096540966409674096840969409704097140972409734097440975409764097740978409794098040981409824098340984409854098640987409884098940990409914099240993409944099540996409974099840999410004100141002410034100441005410064100741008410094101041011410124101341014410154101641017410184101941020410214102241023410244102541026410274102841029410304103141032410334103441035410364103741038410394104041041410424104341044410454104641047410484104941050410514105241053410544105541056410574105841059410604106141062410634106441065410664106741068410694107041071410724107341074410754107641077410784107941080410814108241083410844108541086410874108841089410904109141092410934109441095410964109741098410994110041101411024110341104411054110641107411084110941110411114111241113411144111541116411174111841119411204112141122411234112441125411264112741128411294113041131411324113341134411354113641137411384113941140411414114241143411444114541146411474114841149411504115141152411534115441155411564115741158411594116041161411624116341164411654116641167411684116941170411714117241173411744117541176411774117841179411804118141182411834118441185411864118741188411894119041191411924119341194411954119641197411984119941200412014120241203412044120541206412074120841209412104121141212412134121441215412164121741218412194122041221412224122341224412254122641227412284122941230412314123241233412344123541236412374123841239412404124141242412434124441245412464124741248412494125041251412524125341254412554125641257412584125941260412614126241263412644126541266412674126841269412704127141272412734127441275412764127741278412794128041281412824128341284412854128641287412884128941290412914129241293412944129541296412974129841299413004130141302413034130441305413064130741308413094131041311413124131341314413154131641317413184131941320413214132241323413244132541326413274132841329413304133141332413334133441335413364133741338413394134041341413424134341344413454134641347413484134941350413514135241353413544135541356413574135841359413604136141362413634136441365413664136741368413694137041371413724137341374413754137641377413784137941380413814138241383413844138541386413874138841389413904139141392413934139441395413964139741398413994140041401414024140341404414054140641407414084140941410414114141241413414144141541416414174141841419414204142141422414234142441425414264142741428414294143041431414324143341434414354143641437414384143941440414414144241443414444144541446414474144841449414504145141452414534145441455414564145741458414594146041461414624146341464414654146641467414684146941470414714147241473414744147541476414774147841479414804148141482414834148441485414864148741488414894149041491414924149341494414954149641497414984149941500415014150241503415044150541506415074150841509415104151141512415134151441515415164151741518415194152041521415224152341524415254152641527415284152941530415314153241533415344153541536415374153841539415404154141542415434154441545415464154741548415494155041551415524155341554415554155641557415584155941560415614156241563415644156541566415674156841569415704157141572415734157441575415764157741578415794158041581415824158341584415854158641587415884158941590415914159241593415944159541596415974159841599416004160141602416034160441605416064160741608416094161041611416124161341614416154161641617416184161941620416214162241623416244162541626416274162841629416304163141632416334163441635416364163741638416394164041641416424164341644416454164641647416484164941650416514165241653416544165541656416574165841659416604166141662416634166441665416664166741668416694167041671416724167341674416754167641677416784167941680416814168241683416844168541686416874168841689416904169141692416934169441695416964169741698416994170041701417024170341704417054170641707417084170941710417114171241713417144171541716417174171841719417204172141722417234172441725417264172741728417294173041731417324173341734417354173641737417384173941740417414174241743417444174541746417474174841749417504175141752417534175441755417564175741758417594176041761417624176341764417654176641767417684176941770417714177241773417744177541776417774177841779417804178141782417834178441785417864178741788417894179041791417924179341794417954179641797417984179941800418014180241803418044180541806418074180841809418104181141812418134181441815418164181741818418194182041821418224182341824418254182641827418284182941830418314183241833418344183541836418374183841839418404184141842418434184441845418464184741848418494185041851418524185341854418554185641857418584185941860418614186241863418644186541866418674186841869418704187141872418734187441875418764187741878418794188041881418824188341884418854188641887418884188941890418914189241893418944189541896418974189841899419004190141902419034190441905419064190741908419094191041911419124191341914419154191641917419184191941920419214192241923419244192541926419274192841929419304193141932419334193441935419364193741938419394194041941419424194341944419454194641947419484194941950419514195241953419544195541956419574195841959419604196141962419634196441965419664196741968419694197041971419724197341974419754197641977419784197941980419814198241983419844198541986419874198841989419904199141992419934199441995419964199741998419994200042001420024200342004420054200642007420084200942010420114201242013420144201542016420174201842019420204202142022420234202442025420264202742028420294203042031420324203342034420354203642037420384203942040420414204242043420444204542046420474204842049420504205142052420534205442055420564205742058420594206042061420624206342064420654206642067420684206942070420714207242073420744207542076420774207842079420804208142082420834208442085420864208742088420894209042091420924209342094420954209642097420984209942100421014210242103421044210542106421074210842109421104211142112421134211442115421164211742118421194212042121421224212342124421254212642127421284212942130421314213242133421344213542136421374213842139421404214142142421434214442145421464214742148421494215042151421524215342154421554215642157421584215942160421614216242163421644216542166421674216842169421704217142172421734217442175421764217742178421794218042181421824218342184421854218642187421884218942190421914219242193421944219542196421974219842199422004220142202422034220442205422064220742208422094221042211422124221342214422154221642217422184221942220422214222242223422244222542226422274222842229422304223142232422334223442235422364223742238422394224042241422424224342244422454224642247422484224942250422514225242253422544225542256422574225842259422604226142262422634226442265422664226742268422694227042271422724227342274422754227642277422784227942280422814228242283422844228542286422874228842289422904229142292422934229442295422964229742298422994230042301423024230342304423054230642307423084230942310423114231242313423144231542316423174231842319423204232142322423234232442325423264232742328423294233042331423324233342334423354233642337423384233942340423414234242343423444234542346423474234842349423504235142352423534235442355423564235742358423594236042361423624236342364423654236642367423684236942370423714237242373423744237542376423774237842379423804238142382423834238442385423864238742388423894239042391423924239342394423954239642397423984239942400424014240242403424044240542406424074240842409424104241142412424134241442415424164241742418424194242042421424224242342424424254242642427424284242942430424314243242433424344243542436424374243842439424404244142442424434244442445424464244742448424494245042451424524245342454424554245642457424584245942460424614246242463424644246542466424674246842469424704247142472424734247442475424764247742478424794248042481424824248342484424854248642487424884248942490424914249242493424944249542496424974249842499425004250142502425034250442505425064250742508425094251042511425124251342514425154251642517425184251942520425214252242523425244252542526425274252842529425304253142532425334253442535425364253742538425394254042541425424254342544425454254642547425484254942550425514255242553425544255542556425574255842559425604256142562425634256442565425664256742568425694257042571425724257342574425754257642577425784257942580425814258242583425844258542586425874258842589425904259142592425934259442595425964259742598425994260042601426024260342604426054260642607426084260942610426114261242613426144261542616426174261842619426204262142622426234262442625426264262742628426294263042631426324263342634426354263642637426384263942640426414264242643426444264542646426474264842649426504265142652426534265442655426564265742658426594266042661426624266342664426654266642667426684266942670426714267242673426744267542676426774267842679426804268142682426834268442685426864268742688426894269042691426924269342694426954269642697426984269942700427014270242703427044270542706427074270842709427104271142712427134271442715427164271742718427194272042721427224272342724427254272642727427284272942730427314273242733427344273542736427374273842739427404274142742427434274442745427464274742748427494275042751427524275342754427554275642757427584275942760427614276242763427644276542766427674276842769427704277142772427734277442775427764277742778427794278042781427824278342784427854278642787427884278942790427914279242793427944279542796427974279842799428004280142802428034280442805428064280742808428094281042811428124281342814428154281642817428184281942820428214282242823428244282542826428274282842829428304283142832428334283442835428364283742838428394284042841428424284342844428454284642847428484284942850428514285242853428544285542856428574285842859428604286142862428634286442865428664286742868428694287042871428724287342874428754287642877428784287942880428814288242883428844288542886428874288842889428904289142892428934289442895428964289742898428994290042901429024290342904429054290642907429084290942910429114291242913429144291542916429174291842919429204292142922429234292442925429264292742928429294293042931429324293342934429354293642937429384293942940429414294242943429444294542946429474294842949429504295142952429534295442955429564295742958429594296042961429624296342964429654296642967429684296942970429714297242973429744297542976429774297842979429804298142982429834298442985429864298742988429894299042991429924299342994429954299642997429984299943000430014300243003430044300543006430074300843009430104301143012430134301443015430164301743018430194302043021430224302343024430254302643027430284302943030430314303243033430344303543036430374303843039430404304143042430434304443045430464304743048430494305043051430524305343054430554305643057430584305943060430614306243063430644306543066430674306843069430704307143072430734307443075430764307743078430794308043081430824308343084430854308643087430884308943090430914309243093430944309543096430974309843099431004310143102431034310443105431064310743108431094311043111431124311343114431154311643117431184311943120431214312243123431244312543126431274312843129431304313143132431334313443135431364313743138431394314043141431424314343144431454314643147431484314943150431514315243153431544315543156431574315843159431604316143162431634316443165431664316743168431694317043171431724317343174431754317643177431784317943180431814318243183431844318543186431874318843189431904319143192431934319443195431964319743198431994320043201432024320343204432054320643207432084320943210432114321243213432144321543216432174321843219432204322143222432234322443225432264322743228432294323043231432324323343234432354323643237432384323943240432414324243243432444324543246432474324843249432504325143252432534325443255432564325743258432594326043261432624326343264432654326643267432684326943270432714327243273432744327543276432774327843279432804328143282432834328443285432864328743288432894329043291432924329343294432954329643297432984329943300433014330243303433044330543306433074330843309433104331143312433134331443315433164331743318433194332043321433224332343324433254332643327433284332943330433314333243333433344333543336433374333843339433404334143342433434334443345433464334743348433494335043351433524335343354433554335643357433584335943360433614336243363433644336543366433674336843369433704337143372433734337443375433764337743378433794338043381433824338343384433854338643387433884338943390 |
- commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Oct 10 11:41:01 2008 +0800
- Do not init SATA when disabled on 8536DS.
- SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
- driver still try to access the SATA registers, the cpu will hangup.
- This patch try to fix this by reading the serdes status before the SATA
- initialize.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
- Author: Nikita V. Youshchenko <yoush@cs.msu.su>
- Date: Fri Oct 3 00:03:55 2008 +0400
- fsl_diu: fix alignment error that caused malloc corruption
- When aligning malloc()ed screen_base, invalid offset was added.
- This not only caused misaligned result (which did not cause hardware
- misbehaviour), but - worse - caused screen_base + smem_len to
- be out of malloc()ed space, which in turn caused breakage of
- futher malloc()/free() operation.
- This patch fixes screen_base alignment.
- Also this patch makes memset() that cleans framebuffer to be executed
- on first initialization of diu, not only on re-initialization. It looks
- correct to clean the framebuffer instead of displaying random garbage;
- I believe that was disabled only because that memset caused breakage
- of malloc/free described above - which no longer happens with the fix
- described above.
- Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>
- commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Sep 24 10:29:37 2008 +0200
- api: Fix building with CONFIG_API
- This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.
- USB_MAX_STOR_DEV is defined in include/usb.h, but
- needed in api/api_storage.c.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Tue Sep 23 12:39:40 2008 -0500
- Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- commit 81e612014c40c922ec35488d17c504d4e9286f06
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Tue Sep 23 12:38:42 2008 -0500
- Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
- The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
- CFG_EEPROM_PAGE_WRITE_BITS in various temperature
- sensor drivers are not necessary
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Oct 14 07:04:38 2008 -0400
- cmd_spi: remove broken signed casting for display
- Since we're working with unsigned data, you can't apply a signed pointer
- cast and then attempt to print the result. Otherwise you get wrong output
- when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Oct 14 07:05:24 2008 -0400
- strings cmd: drop old CONFIG_CFG_STRINGS define
- We don't need CONFIG_CFG_STRINGS anymore now that we have the define
- CONFIG_CMD_STRINGS and Makefile control.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit fecb5ade3b37f62981f2b05b621005850173aaa9
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Sep 19 17:32:49 2008 +0800
- Fix the NAND size overflow issue.
- When the total size of all NAND devices exceeds 4 GiB, the size will
- overflow. This patch tries to fix this.
- Note that we still have a problem when a single NAND device is bigger
- than 4 GiB: then the overflow would actually happen earlier, i. e.
- when storing the size in nand_info[].size, as nand_info[].size is an
- "u_int32_t".
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 30f574717277238b9014b8136c90eea77196490f
- Author: Louis Su <louis@asix.com.tw>
- Date: Wed Jul 9 11:01:37 2008 +0800
- AX88180: new gigabit network driver
- Signed-off-by: Louis Su <louis@asix.com.tw>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Tue Aug 19 16:07:03 2008 +0200
- enable 10/100M at VSC8601 at tsec driver
- Currently VSC8601 doesn't link with 10/100M partners if the
- EEPROM/Strapping is not set up.
- Setting the auto-neg register fixes this.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 702c85b0e876d587c11acdbb55738ee52acd54f4
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Sep 30 15:02:53 2008 +0900
- net: ne2000: Divided a function of NE2000 driver
- get_prom function was used __attriute__ , but it is not enable.
- ax88796.o does not do link besides ne2000.o. When ld is carried
- out, get_prom function of ax88796.c is ignored.
- This problem is a thing by specifications of ld.
- I checked and test this patch on SuperH and MIPS.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Oct 14 11:10:59 2008 +0900
- sh: rsk7203: Add smc911x driver support to board config file
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit cae6f909baf86357b3c0bd01acfc414348c4d175
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Oct 9 13:54:33 2008 +0900
- sh: Fix cannot execute a stand-alone application
- Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Oct 8 23:38:00 2008 -0500
- fsl_pci_init do not scan bus when configured as an end-point
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Tue Sep 16 17:07:53 2008 -0400
- ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
- This is no longer necessary now that the GD_FLG_RELOC flag is set for
- all ARM boards.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit d977a57356657ba241256231efca32828a5822f9
- Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
- Date: Sat Sep 13 10:04:32 2008 +0200
- Fix lzma uncompress call (image_start wrongly used instead image_len)
- Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
- commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Thu Aug 28 14:09:15 2008 -0700
- mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
- This is needed in unlock_ram_in_cache() because it is called from C and
- will corrupt the small data area anchor that is kept in R2.
- lock_ram_in_cache() is modified similarly as good coding practice, but
- is not called from C.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 19 15:05:34 2008 -0500
- 86xx: remove redudant code with lib_ppc/interrupts.c
- For some reason we duplicated the majority of code in lib_ppc/interrupts.c
- Not know how that happened, but there is no good reason for it.
- Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
- they exist.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0d01f66d235118515b5086b88f82498bc0695d6a
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Thu Oct 9 01:26:36 2008 -0500
- CFI: cfi_flash write fix for AMD legacy
- The flash_unlock_seq requires a sector for AMD_LEGACY.
- Fix a retcode check typeo.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 542b385a620a1783454a00424930e51895f45073
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Oct 7 13:13:10 2008 +0200
- ppc4xx: Fix USB 2.0 phy reset sequence
- This patch fixes USB 2.0 communication issues on some DU440 boards.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit df8c1ce11114c2260dedb5547281945f7db8fa5c
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Oct 7 13:13:09 2008 +0200
- ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Oct 7 13:13:08 2008 +0200
- ppc4xx: Fix DU440 GPIO configuration
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 35dd025c70fcc4389317db2f2a9d14795172137d
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Oct 7 13:13:07 2008 +0200
- ppc4xx: Update DU440 config
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f3bf9273939ffe1a60a32a2eef909097f15df56b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Oct 8 15:36:39 2008 -0500
- MPC8572DS: Fix compile warnings
- Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
- compile warnings:
- cmd_i2c.c:112: warning: missing braces around initializer
- cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit dffd2446fb041f38ef034b0fcf41e51e5e489159
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Tue Sep 30 10:55:57 2008 +0200
- 85xx: Using proper I2C source clock divider for MPC8544
- Measurements with our MPC8544 board showed that the I2C bus frequency
- is wrong by a factor of 1.5. Obviously, the interpretation of the
- MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
- correct. There seems to be an error in the 8544 RM.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
- Author: Rafal Czubak <rcz@semihalf.com>
- Date: Wed Oct 8 13:41:30 2008 +0200
- FSL: Fix get_cpu_board_revision() return value.
- get_cpu_board_revision() returned board revision based on information stored
- in global static struct eeprom. It should instead use one from local struct
- board_eeprom, to which the data is actually read from EEPROM. The bug led to
- system hang after printing L1 cache information on U-Boot startup. The problem
- was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
- boards using CFG_I2C_EEPROM_CCID.
- The change has been successfully tested on MPC8555CDS system.
- Signed-off-by: Rafal Czubak <rcz@semihalf.com>
- commit 747f316cca484ed627a97dd3391febabce384186
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 30 20:08:49 2008 +0200
- update uImage FIT multi documentation
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 30 20:08:36 2008 +0200
- move README.imx31 to doc/ and merge with README.mx31
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Sep 25 20:54:37 2008 +0200
- i.MX31: switch to CFG_HZ=1000
- Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
- cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
- provides 2% or 0.4% precision depending on the
- CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
- boot-delay.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
- Author: gnusercn <gnusercn@gmail.com>
- Date: Wed Oct 8 18:58:58 2008 +0200
- Fix bug: in arch-arm, env_get_char dose not work fine
- due to the arm implementation which supposed that U-Boot is in RAM
- when we jump to start_armboot
- Signed-off-by: gnusercn <gnusercn@gmail.com>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
- Author: Adam Graham <agraham@amcc.com>
- Date: Mon Oct 6 10:16:13 2008 -0700
- ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
- After changing SDRAM_CLKTR phase value rerun the memory preload
- initialization sequence (INITPLR) to reset and relock the memory
- DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
- adjustment effects the phase relationship of the internal, to the
- PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.
- Signed-off-by: Adam Graham <agraham@amcc.com>
- Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Fri Oct 3 11:48:03 2008 -0400
- Remove redundant #define for MPC8536DS
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit 445a7b38308eb05b41de74165b20855db58c7ee5
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Fri Oct 3 11:47:30 2008 -0400
- Add ID EEPROM support for MPC8572DS
- The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
- system information like mac addresses etc. This patch enables it.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Fri Oct 3 11:46:59 2008 -0400
- Minor fixes for I2C address on MPC8572DS
- MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
- according to the board spec, and adds the 2nd i2c bus offset.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Sat Sep 27 14:40:57 2008 +0800
- Fix the incorrect DDR clk freq reporting on 8536DS
- On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
- The display is still sync mode DDR freq. This patch try to fix
- this. The display DDR freq is now the actual freq in both
- sync and async mode.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Oct 7 10:28:46 2008 -0500
- 85xx: Remove setting of *cache-line-size in device trees
- ePAPR says if the *cache-block-size is the same as *cache-line-size
- than we don't need the *cache-line-size property.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit cd3cb0d9269d155276b00207e3816a9347fd1c92
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Oct 4 07:56:06 2008 -0400
- libfdt: Fix error in documentation for fdt_get_alias_namelen()
- Oops, screwed up the function name in the documenting comment for this
- function. Trivial correction in this patch.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Wed Aug 20 16:55:14 2008 +1000
- libfdt: Add function to explicitly expand aliases
- Kumar has already added alias expansion to fdt_path_offset().
- However, in some circumstances it may be convenient for the user of
- libfdt to explicitly get the string expansion of an alias. This patch
- adds a function to do this, fdt_get_alias(), and uses it to implement
- fdt_path_offset().
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Thu Oct 2 01:55:38 2008 -0400
- cfi_flash: do not reset flash when probe fails
- The CFI flash driver starts at flash_init() which calls down into
- flash_get_size(). This starts by calling flash_detect_cfi(). If said
- function fails, flash_get_size() finishes by attempting to reset the
- flash. Unfortunately, it does this with an info->portwidth set to 0x10
- which filters down into flash_make_cmd() and that happily smashes the
- stack by sticking info->portwidth bytes into a cfiword_t variable that
- lives on the stack. On a 64bit system you probably won't notice, but
- killing the last 8 bytes on a 32bit system usually leads to a corrupt
- return address. Which is what happens on a Blackfin system.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Sep 26 17:03:26 2008 +0200
- fdt: Overwrite /chosen node in bootm if it already exists in the dtb
- Set force parameter in fdt_chosen() call in do_bootm_linux() call.
- Without this, the chosen node is not overwritten if it already
- exists.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Sep 25 11:02:17 2008 -0500
- Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.
- Using Gcc 4.3 detected this problem:
- ../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
- ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
- occur when assuming that (X + c) < X is always false
- To fix the problem, treat the offset as an unsigned int.
- The problem report and proposed fix were provided
- by Steve Papacharalambous <stevep@freescale.com>.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Fri Aug 29 14:19:13 2008 +1000
- libfdt: Fix bugs in fdt_get_path()
- The current implementation of fdt_get_path() has a couple of bugs,
- fixed by this patch.
- First, contrary to its documentation, on success it returns the length
- of the node's path, rather than 0. The testcase is correspondingly
- wrong, and the patch fixes this as well.
- Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
- instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
- Specifically this happens when there is insufficient space even to
- hold the path's second last component. This behaviour is corrected,
- and the testcase updated to check it.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit 33af3e6656e84660d397b5dd95abab2dccc36f83
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Oct 1 12:34:58 2008 +0200
- TQM5200: enable support for ATAPI devices
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Sep 15 05:48:25 2008 +0200
- Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"
- we need this due to the arm implementation which supposed that U-Boot
- is in RAM when we jump to start_armboot
- This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
- in order to do it for all arm board
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Sep 24 08:46:25 2008 -0500
- mpc83xx: don't disable autoboot
- bootdelay set to -1 'permanently' disables autobooting, even if
- bootcmd is specified. Change to a positive value to allow
- autobooting when a bootcmd is set.
- Reported-by: Coray Tate <Coray.Tate@freescale.com>
- Cc: Scott Wood <scottwood@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Wed Sep 24 10:42:15 2008 +0900
- mpc83xx: Fix typo in include/mpc83xx.h
- Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 162c41c03179727a1d14262f703c9a8bc40231fa
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Sep 23 09:38:49 2008 -0500
- mpc83xx: add h/w flash protection to board configs
- the operating system may leave flash in a h/w locked state after writing.
- This allows u-boot to continue to write flash by enabling h/w unlocking
- by default.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Thu Sep 11 21:35:36 2008 +0400
- mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
- The spd_dram code shifts the base address, then masks 20 bits, but
- forgets to shift the base address back. Fix this by just masking the
- base address correctly.
- Found this bug while trying to relocate a DDR memory at the base != 0.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8fd4166c467a46773f80208bda1ec3b4757747bc
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Sep 22 16:10:43 2008 +0200
- ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
- Depending on the configuration jumper "SATA SELECT", U-Boot disabled
- either one PCIe node or the SATA node in the device tree blob. This
- patch removes the unnecessary and even confusing warning, when the node
- is not found at all.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Fri Sep 19 13:30:06 2008 +0200
- Add missing device types to dev_print() in part.c
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 22 22:23:06 2008 +0200
- Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
- eventually leads to a machine check. This change assures that DPRAM
- is allocated only once in that case.
- Signed-off-by: Gary Jennejohn <garyj@denx.de>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
- Author: Laurent Pinchart <laurentp@cse-semaphore.com>
- Date: Wed Sep 17 17:57:34 2008 +0200
- Fix Spartan-3 definitions.
- A few Spartan-3 definitions erroneously use Spartan-3E size
- constants. This patch fixes them.
- Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
- commit 28113e1f0da4146b823ffce37680d31d5685a60b
- Author: Laurent Pinchart <laurentp@cse-semaphore.com>
- Date: Wed Sep 17 17:41:58 2008 +0200
- Remove duplicate Spartan-3E definition.
- Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Sep 17 13:46:17 2008 +0200
- socrates: change default mtest address range
- Running mtest command on socrates without specifying
- an address range crashes the board. This patch changes
- default mtest address range to prevent this behavior.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Sep 17 12:34:45 2008 +0200
- socrates: fix crash after relocation
- Currently U-Boot crashes after relocation to RAM.
- Changing the CPO value of the DDR SDRAM TIMING_CFG_2
- register to READ_LAT + 1 (to the value it was before
- conversion of socrates to new DDR code) fixes the
- problem.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 562788b0a303f3528b920d81f547f5ca77ba528e
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Sep 17 11:45:51 2008 +0200
- socrates: fix SPD EEPROM address
- Commit be0bd8234b9777ecd63c4c686f72af070d886517
- changed SPD EEPROM address to 0x51 and DDR SDRAM
- detection stopped working. Change this address
- back to 0x50.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 023824549a370bd185d7129d9a6c86f9be7b86a8
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Sep 22 11:06:50 2008 +0200
- Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"
- This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b5d10a13525c07ec6374adf840d7c87553b5f189
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Sep 18 19:34:36 2008 +0900
- sh: Fix compile warning
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 4a065abf926f128beb36d93449defa0d690e7fef
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Sep 18 19:04:26 2008 +0900
- sh: Add support watchdog for SH4A core
- Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
- And fix some compile warning.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Sep 17 11:45:26 2008 +0900
- sh: Fix typo in SH serial driver
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Sep 17 11:08:36 2008 +0900
- sh: Add support any page size and empty_zero_page to SH Linux uImage
- Old U-Boot supported 4KB page size only. If this version, Linux
- kernel can not get command line from U-Boot.
- SH Linux kernel can change page size and empty_zero_page.
- This patch support this function and fix promlem.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit ce9f99ddb59628f41dc534e892368a7d66dfc774
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Aug 28 13:40:52 2008 +0900
- sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
- Add function of smc911x, pkt_data_pull and pkt_data_push.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Sep 18 13:57:32 2008 +0200
- ADS5121: fix typo in "rootpath" default setting
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Sep 17 10:17:55 2008 +0200
- Coding style cleanup; update CHANEGLOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
- Author: Victor Gallardo <vgallardo@amcc.com>
- Date: Tue Sep 16 06:59:13 2008 -0700
- ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)
- Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
- Signed-off-by: Adam Graham <agraham@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ce47eb402c5e29a025399dc282246414fc492940
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Tue Sep 16 10:04:47 2008 -0500
- Support for multiple SGMII/TBI interfaces for TSEC ethernet
- Fix TBI PHY accesses to use the proper offset in CPU register space. The
- previous code would incorrectly access the TBI PHY by reading/writing to CPU
- register space at the same location as would be used to access external PHYs.
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 7c803be2eb3cae245dedda438776e08fb122250f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 16 18:02:19 2008 +0200
- TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
- After switching to using the CFI flash driver, the correct remapping
- of the flash banks was forgotten.
- Also, some boards were not adapted, and the old legacy flash driver
- was not removed yet.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Sep 14 00:59:35 2008 +0200
- Prepare v2008.10-rc2
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Sep 13 02:23:05 2008 +0200
- Coding style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0c32565f536609d78feef35c88bbc39d3ac53a73
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Wed Sep 10 09:18:34 2008 -0500
- Update mailing list email and archive addresses
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
- Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
- Date: Thu Sep 11 15:40:01 2008 +0200
- 85xx: socrates: autoprobe Lime chip
- This patch is an attempt to implement autoprobing for the Lime
- presence on the bus.
- Configure GPCM for Lime CS2 and try to access chip ID registers.
- Second read atempt delivers register values if the chip is present.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
- Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
- Date: Thu Sep 11 15:40:01 2008 +0200
- 85xx: socrates: Add support for new image format.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Sep 11 17:28:18 2008 +0900
- sh: Fix compile error for r2dplus
- netdev.h was not include by r2dplus.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- commit 56844a22b76c719e600047e23b80465a44d76abd
- Author: Heiko Schocher <hs@denx.de>
- Date: Thu Sep 11 08:11:23 2008 +0200
- powerpc: Fix bootm to boot up again with a Ramdisk
- Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
- and this stopped Linux from booting with a Ramdisk. This patch fixes
- this, by deleting the useless dummy mem reservation.
- When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
- added to of_size, so we dont need anymore a dummy mem reservation.
- I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
- system (=0x44 bytes) and rounded it up to 0x80).
- Signed-off-by: Heiko Schocher <hs@denx.de>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
- Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
- Date: Mon Sep 8 02:46:13 2008 +0200
- Add support for LZMA uncompression algorithm.
- Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0008b6d968160abe2bfd936493f3a516a7c8da20
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Fri Jun 27 23:04:20 2008 +0400
- fsl_elbc_nand: ecclayout cleanups
- This patch deletes oobavail assignments, they're calculated by the nand
- core code in nand_scan_tail, plus current oobavail values are wrong for
- the LP NANDs.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Fri Jun 27 23:04:13 2008 +0400
- fsl_elbc_nand: implement support for flash-based BBT
- This patch implements support for flash-based BBT for chips working
- through ELBC NAND controller, so that NAND core will not have to re-scan
- for bad blocks on every boot.
- Because ELBC controller may provide HW-generated ECCs we should adjust
- bbt pattern and bbt version positions in the OOB free area.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 97ae023648e764f794ffb9c52da109d6caf09c47
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Fri Jun 27 23:04:04 2008 +0400
- fsl_elbc_nand: fix OOB workability for large page NAND chips
- For large page chips, nand_bbt is looking into OOB area, and checking
- for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
- reserved for bbt means.
- But ELBC driver is specifying ecclayout so that oobfree area starts at
- offset 1, so only one byte left for the bbt purposes.
- This causes problems with any OOB users, namely JFFS2: after first mount
- JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
- OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
- OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- And on the next boot, NAND core will rescan for bad blocks, then will
- see "0xff 0x19" pattern, and will mark all blocks as bad ones.
- To fix the issue we should implement our own bad block pattern: just one
- byte at OOB start. Though, this will work only for x8 chips. For x16
- chips two bytes must be checked. Since ELBC driver does not support x16
- NANDs (yet), we're safe for now.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 7238ada313057a85409485b8ee21515dc10c07a5
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Sep 12 13:52:21 2008 +0200
- MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b18410e508a12ba0a177dfc2a386857c806fa96d
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Sep 11 13:05:56 2008 +0200
- ppc4xx: Enable device tree (FDT) support in zeus board port
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Sep 10 16:53:47 2008 +0200
- ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
- This patch fixes a problem introdiced with patch
- bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
- initdram()].
- The boards affected are:
- - PCI405
- - PPChameleonEVB
- - quad100hd
- - taihu
- - zeus
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 61737c59a3285f6fadf96a5836879898c04ec28d
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Thu Sep 11 19:41:26 2008 -0400
- ppc4xx: Add .gitignore file to xilinx-ppc440 boards
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Thu Sep 11 19:41:25 2008 -0400
- ppc4xx: Fix compilation of v5fx30teval_flash
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Wed Sep 10 17:44:30 2008 -0400
- ppc4xx: Fix in-tree build for ppc440-generic boards
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Sep 12 02:20:47 2008 +0200
- ARM: synchronize mach-types.h with linux 2.6.27-rc6
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
- Author: Jens Scharsig <esw@bus-elektronik.de>
- Date: Fri Sep 12 02:20:47 2008 +0200
- at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
- This patch prevents linker error on AT91RM9200 boards, if
- CONFIG_CMD_I2_TREE is set.
- It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
- Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
- commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Fri Sep 12 02:20:47 2008 +0200
- ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
- ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit 03db53335c8eba656a7c44d1555b1a4514383e33
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Fri Sep 12 02:20:46 2008 +0200
- make: Remove redundant __ARM__ addition when cross-compiling on *BSD
- __ARM__ is given by arm_config.mk automatically.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
- Author: Claudio Scordino <claudio@evidence.eu.com>
- Date: Fri Sep 12 02:20:46 2008 +0200
- Fix MACH_TYPE for the AT91RM9200DK board.
- Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
- commit 274737e5eb25b2bcd3af3a96da923effd543284f
- Author: Andrew Dyer <adyer@righthandtech.com>
- Date: Fri Sep 12 02:20:46 2008 +0200
- i.mx change get_timer(base) to return time since base
- This patch changes get_timer() for i.MX to return the time since
- 'base' instead of the time since the counter was at zero.
- Symptom seen is flash timeout errors when erasing or programming a
- sector using the common cfi flash code.
- Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
- commit 48fed40575b3e8eae960eb0141509ddd9a73012a
- Author: Andrew Dyer <adyer@righthandtech.com>
- Date: Fri Sep 12 02:20:46 2008 +0200
- i.MX use u-boot baud rate and don't assume UART master clock
- 1) Change the i.MX serial driver to use the baud rate set in the
- u-boot environment
- 2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
- 3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
- one to clear" like other status bits in the reg.)
- Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
- commit 6e1551a870d360805b9d172dc56d935064abe71d
- Author: Andrew Dyer <adyer@righthandtech.com>
- Date: Fri Sep 12 02:20:46 2008 +0200
- arm920t fix constant error in start.S
- Code in cpu/arm920t/start.S will die with a compilation error if
- CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
- the ARM sub instruction. Change the code so that each is subtracted
- independently to avoid the error.
- Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
- commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Fri Sep 12 02:20:40 2008 +0200
- ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
- - Correct Invalid #define of MPUTIM_PTV_MASK for
- omap1510 & omap730 register definition
- MPUTIM_PTV_MASK is defined as
- #define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
- while it should have been
- #define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
- - Below Patch corrects the same
- Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
- Author: Adrian Filipi <adrian.filipi@eurotech.com>
- Date: Fri Jul 18 11:52:02 2008 -0400
- Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
- Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
- commit eb16135df20535b0d19969f50fb5bd17f95e9c25
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Aug 28 12:25:11 2008 +0200
- i.MX31: document timer precision option
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 1a6337b01351b82a45b0defa76f08744511c580b
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Fri Aug 29 10:36:18 2008 +0200
- i.MX31: Make the SPI bus and chip select configurable for MC13783
- The i.MX31 has three SPI buses and each bus has several chip selects
- and the MC13783 chip can be connected to any of these. The current
- RTC driver for MC13783 is hardcoded for CSPI2/SS2.
- This patch makes make MC13783 SPI bus and chip select configurable
- via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit 8c4ebec25b21e355b8488698ec1594da9701fff4
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Fri Aug 29 10:36:17 2008 +0200
- i.MX31: Add reset_timer() and modify get_timer_masked().
- This patch adds the reset_timer() function (needed by nand_base.c) and
- modifies the get_timer_masked() to work in the same way as the omap24xx
- function.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit deeec4991a55de243787002ede24d2331d234fc8
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:09 2008 +0200
- ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:09 2008 +0200
- bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0e8d158664a913392cb01fb11a948d83f72e105e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:06 2008 +0200
- rename CFG_ENV macros to CONFIG_ENV
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:05 2008 +0200
- nvedit: rename error comment to CONFIG_ENV_IS_IN_
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit b64b775e7546ed138df360ceb3a71ee358cb9a01
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:05 2008 +0200
- cmd_mem: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:05 2008 +0200
- move cmd_get_data_size to command.c
- add CMD_DATA_SIZE macro to enable it
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 507641d2491980531932b9f25dab37fe5e6c3a1a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:04 2008 +0200
- env_flash: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 5a1aceb0689e2f731491838970884a673ef7e7d3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:04 2008 +0200
- rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:03 2008 +0200
- cleanup use of CFG_ENV_IS_IN_FLASH
- - #if CFG_ENV_IS_IN_FLASH
- - #if (CFG_ENV_IS_IN_FLASH == 1)
- - #define CFG_ENV_IS_IN_FLASH 0
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:01 2008 +0200
- rename environment.c in env_embedded.c to reflect is functionality
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c0878af6e32f0fd8e13a6ca315b9add64441115a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:01 2008 +0200
- env_nowhere: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 93f6d72544da4510a146bc4c93d609b0116cde37
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:00 2008 +0200
- rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2556ef78113b5f089dfcac5da90bf31dd568397b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:00 2008 +0200
- env_sf: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:00 2008 +0200
- rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 55c5f49910ec8225347aa1d211352a84de6649b4
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:48:00 2008 +0200
- env_onenand: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 9656138ff1a34d4c4768db6b490deffc40ee674b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:59 2008 +0200
- rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 957a0e69575683efd70ace147746bbb3d8e7c501
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:59 2008 +0200
- env_nvram: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 9314cee6917444ab88bd4e758da7a30975120187
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:59 2008 +0200
- rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:59 2008 +0200
- env_nand: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 51bfee192099206a4397f15f3b93516e01f58ab0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:58 2008 +0200
- rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:58 2008 +0200
- env_dataflash: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 057c849c45b9ee19df8ff3acdeee66be52819962
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:58 2008 +0200
- rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Sep 10 22:47:52 2008 +0200
- cmd_eeprom: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Sep 5 09:19:54 2008 +0200
- env_eeprom: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Sep 5 09:19:30 2008 +0200
- rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 32628c5008105a732212003d83b75f05e5243bb2
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 30 23:54:58 2008 +0200
- cmd_mac: Move conditional compilation to Makefile
- finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
- start in commit ad8f8687b78c3e917b173f038926695383c55555
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit e5648acab153f0f429bfc714902c5aaa7879f71b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 30 23:47:41 2008 +0200
- cmd_fdc: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 30 23:47:38 2008 +0200
- common/Makefile: add core command section
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 30 23:29:57 2008 +0200
- cmd_vfd: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6644641d072aee3087da129d8443187196a4d8a9
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Sep 10 11:48:49 2008 -0500
- delta, zylonite: Update nand_oobinfo to nand_ecclayout.
- This is part of the switch to newer upstream MTD code.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Sat Aug 30 17:06:55 2008 -0400
- ARM DaVinci: Fix broken HW ECC for large page NAND.
- Based on original patch by Bernard Blackham <bernard@largestprime.net>
- U-boot's HW ECC support for large page NAND on Davinci is completely
- broken. Some kernels, such as the 2.6.10 one supported by
- MontaVista for DaVinci, rely upon this broken behaviour as they
- share the same code for ECCs. In the existing scheme, error
- detection *might* work on large page, but error correction
- definitely does not. Small page ECC correction works, but the
- format is not compatible with the mainline git kernel.
- This patch adds ECC code that matches what is currently in the
- Davinci git repository (since NAND support was added in 2.6.24).
- This makes the ECC and OOB layout written by u-boot compatible with
- Linux for both small page and large page devices and fixes ECC
- correction for large page devices.
- The old behaviour can be restored by defining the macro
- CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Acked-by: Sergey Kubushyn <ksi@koi8.net>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
- Author: Heiko Schocher <hs@denx.de>
- Date: Wed Sep 10 11:15:28 2008 +0200
- muas3001: update BR4 settings
- Also set up the port pins for using I2C.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 3591293509e0c0bcf244b0f974775bff2e25697e
- Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
- Date: Wed Sep 10 09:43:49 2008 +0300
- autoscr: Fix one-character lines and non-newline terminated scripts
- When not using hush, the autoscr command now executes lines that are
- only one character long. It also runs the last line of scripts even if
- it does not end in a newline.
- Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
- commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
- Author: Victor Gallardo <vgallardo@amcc.com>
- Date: Tue Sep 9 15:13:29 2008 -0700
- ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
- On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
- and glacier.
- Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
- commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
- Author: Heiko Schocher <hs@denx.de>
- Date: Mon Sep 8 10:21:11 2008 +0200
- muas3001: added support for the LM75 sensor.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
- Author: Heiko Schocher <hs@denx.de>
- Date: Mon Sep 8 10:20:19 2008 +0200
- muas3001: activate WDT for the muas3001 board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
- Author: Heiko Schocher <hs@denx.de>
- Date: Mon Sep 8 10:19:36 2008 +0200
- muas3001: added 64MB SDRAM autodetection.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 5251469943895de4bb9a04d5053352cc22acb7d5
- Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
- Date: Thu Aug 21 07:12:26 2008 -0700
- Fix printf errors under -DDEBUG
- Fix printf format-string/arg mismatches under -DDEBUG.
- These warnings occur with DEBUG defined for a platform using
- cpu/mpc85xx. Users of other architectures can unearth similar
- problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
- after "CFLAGS += $(call cc-option,-fno-stack-protector)".
- Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 23:55:18 2008 +0200
- Update CHANGELOG, prepare 2008-10-rc1 release
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Sep 8 08:51:29 2008 -0500
- 85xx: Ensure timebase is zero on secondary cores
- The e500um says the timebase is volatile out of reset. To ensure
- TB sync works we need to make sure its zero.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 9 22:18:24 2008 +0200
- bootm_load_os: fix load_end debug message
- print load_end value not pointer
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1d9af0be764960e6cc1c093e97176c3542796820
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 9 22:18:23 2008 +0200
- bootm: enable fdt support only on ppc, m68k and sparc
- ...as done in image.c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 748b5274e76f81df85cfcffaffedc323678d0623
- Author: Markus Heidelberg <markus.heidelberg@web.de>
- Date: Tue Sep 9 18:51:05 2008 +0200
- common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)
- Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
- commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
- Author: Markus Heidelberg <markus.heidelberg@web.de>
- Date: Tue Sep 9 17:31:46 2008 +0200
- gitignore: add tags files and Vim swap file
- Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
- commit 1d9b67b23fca6a25154333733204339802510720
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Tue Sep 9 17:52:47 2008 +0900
- add board_eth_init() for sh7785lcr board
- Fix the problem that cannot work RTL8169 on sh7785lcr board.
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 6 16:08:41 2008 -0500
- mtd: SPI Flash: Support the STMicro Flash
- Add MTD SPI Flash support for M25P16, M25P20, M25P32,
- M25P40, M25P64, M25P80, M25P128.
- Signed-off-by: Jason McMullan <mcmullan@netapp.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 17:55:31 2008 +0200
- trab: fix build problem after change to use do_div()
- We must link with libgeneric now.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
- Author: Ryan CHEN <ryan.chen@st.com>
- Date: Wed Aug 20 13:00:17 2008 -0400
- Correct drv_usb_kbd_init function
- The patch is that check if usb_get_dev_index() function return valid
- pointer. If valid, continue. Otherwise return -1.
- Signed-off-by: Ryan Chen <ryan.chen@st.com>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Wed Aug 20 11:22:02 2008 +0200
- Make usb-stop() safe to call multiple times in a row.
- A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
- enabled the usb_stop() command in common/cmd_bootm.c which was
- not enabled for some time, because no board did actually set the
- CFG_CMD_USB flag. So, now the usb_stop() is executed before
- loading the linux kernel.
- However, the usb_ohci driver hangs up (at least on AT91SAM) if the
- driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
- If some other piece of code calls usb_stop() before the bootm command,
- this command will hangup the system during boot.
- (usb start and stop is typically used while booting from usb memory stick)
- But, stopping the usb stack twice is useless anyway, and a flag already
- existed that kept track on the usb_init()/usb_stop() calls.
- So, we now check if the usb stack is really started before we stop it.
- This problem is now fixed in both the upper as low-level layer.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 16:55:47 2008 +0200
- Makefile: fix bug introduced by commit 47ffd6c2
- commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Tue Sep 9 10:00:33 2008 -0400
- ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
- This patch solves the problems compiling ml507, v5fx30teval and
- ppc440-generic out of tree.
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
- Author: NÃcolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
- Date: Thu Sep 4 15:35:46 2008 -0300
- Fix dev_print when called from usb_stor_info (usb storage command)
- Fix output of the usb storage command. It was printing "Device 0: not
- available" because IF_TYPE_USB was not included into the switch
- statement.
- Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
- commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Sep 9 12:58:16 2008 +0200
- FIT: make iminfo check hashes of all images in FIT, return 1 on failed check
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 919f550dc11a13abf01c6bc713c968de790b8d7c
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Sep 9 12:58:15 2008 +0200
- FIT: add ability to check hashes of all images in FIT, improve output
- - add function fit_all_image_check_hashes() that verifies if all
- hashes of all images in the FIT are valid
- - improve output of fit_image_check_hashes() when the hash check fails
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 1de1fa408967cef6804bb046b904114519bb36f0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Sep 8 20:54:39 2008 +0200
- qemu_mips: Update linux bootm to support dynamic cmdline
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Mon Sep 8 14:56:49 2008 -0500
- Add support for booting of INTEGRITY operating system uImages
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Sep 8 21:01:29 2008 +0200
- mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Sep 8 13:57:12 2008 -0500
- Remove support for booting ARTOS images
- Pantelis Antoniou stated:
- AFAIK, it is still used but the products using PPC are long gone.
- Nuke it plz (from orbit).
- So remove it since it cleans up a usage of env_get_char outside of
- the environment code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 15:45:18 2008 +0200
- Makefile: compile and link each module just once
- Several source files need to be compiled and linked when one or more
- config options are selected. To allow for easy selection in the
- Makefiles yet to avoild multiple compilation (which costs build time)
- and especially multiple linking (which causes errors), we use
- "COBJS = $(sort COBJS-y)" which eliminates duplicates.
- By courtesy of Detlev Zundel who suggested this approach.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 48d0192fe869948fef14b460b5f0c85bca933693
- Author: Andreas Engel <andreas.engel@ericsson.com>
- Date: Mon Sep 8 14:30:53 2008 +0200
- Moved conditional compile into Makefile
- Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
- commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
- Author: Andreas Engel <andreas.engel@ericsson.com>
- Date: Mon Sep 8 10:17:31 2008 +0200
- Merged serial_pl010.c and serial_pl011.c.
- They only differ in the init function.
- This also adds the missing watchdog support for the PL011.
- Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
- commit 0817d688f307ee2c0598e79175c94a40ce90337b
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Sun Sep 7 17:10:27 2008 -0400
- Remove gap fill in srec object v2
- SREC files do not need gap fill: The load address is specified in the
- file. On the other hand, it can't be avoided in a .bin object. It has
- no information about memory location.
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
- Author: Markus Heidelberg <markus.heidelberg@web.de>
- Date: Sun Sep 7 20:18:27 2008 +0200
- README: fix missing subdirectory in the documentation
- Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
- commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
- Author: Graeme Russ <graeme.russ@gmail.com>
- Date: Sun Sep 7 07:08:42 2008 +1000
- Update i386 code (sc520_cdp)
- Attempt to bring i386 / sc520 inline with master
- Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
- commit 5608692104efa8d56df803dc79ea41ac3607eee5
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Sep 4 13:01:49 2008 +0200
- fw_env: add NAND support
- Add support for environment in NAND with automatic NOR / NAND recognition,
- including unaligned environment, bad-block skipping, redundant environment
- copy.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 9 09:50:24 2008 +0200
- ppc4xx: Fix out-of-tree building of CPCI405 variants
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 59f630588e3fdbd698a0a2798e52a8924e899563
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Aug 15 15:42:11 2008 +0200
- Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit e64987a892353f3d49eb242d997820ef8f538912
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Aug 15 15:42:13 2008 +0200
- 85xx: socrates: Enable Lime support.
- This patch adds Lime GDC support together with support for the PWM
- backlight control through the w83782d chip. The reset pin of the
- latter is attached to GPIO, so we need to reset it in
- early_board_init_r.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 3e79b588b5199f35016f178fc0d5d1266382097f
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Aug 15 15:42:12 2008 +0200
- 85xx: Socrates: Major code update.
- - Update the local bus ranges in the FDT for Linux for the various
- devices connected to the local bus via chip-select.
- - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
- lower than 66 MHz and uses I/O accessor functions consequently.
- - UPM data update.
- - Update of default environment and configuration. Use I2C multibus
- as we do have two I2C buses. Also enable sdram and ext2 commands.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit e8d18541c6ceab821f75faab031740b33fdbfa4b
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Jul 18 16:52:23 2008 +0200
- Update Freescale 85xx boards to sys_eeprom.c
- The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
- format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
- 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
- Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 10:08:02 2008 +0200
- lib_ppc/interrupts.c: make board_show_activity() a weak function
- This allows to use show_activity() without having to
- define an empty board_show_activity() function.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit fe876787f8743883ce58fed61525eaa2f34da4c5
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 10:06:44 2008 +0200
- stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 965de106ba8900372c8b16dc60d5acab7f925e38
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 9 10:03:47 2008 +0200
- NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Aug 15 15:42:11 2008 +0200
- Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 36241ca29d4804a1006fb3f26069effda5202581
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Aug 15 15:42:13 2008 +0200
- 85xx: socrates: Enable Lime support.
- This patch adds Lime GDC support together with support for the PWM
- backlight control through the w83782d chip. The reset pin of the
- latter is attached to GPIO, so we need to reset it in
- early_board_init_r.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Aug 15 15:42:12 2008 +0200
- 85xx: Socrates: Major code update.
- - Update the local bus ranges in the FDT for Linux for the various
- devices connected to the local bus via chip-select.
- - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
- lower than 66 MHz and uses I/O accessor functions consequently.
- - UPM data update.
- - Update of default environment and configuration. Use I2C multibus
- as we do have two I2C buses. Also enable sdram and ext2 commands.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 9 01:22:39 2008 +0200
- disk-on-chip: remove duplicate doc_probe declaration
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 9 00:59:40 2008 +0200
- onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 9 00:59:39 2008 +0200
- rs5c372: fix rtc_set prototype
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Thu Aug 14 14:08:28 2008 +0200
- ARM: fix warning: target CPU does not support interworking
- This patch fixes warnings like this:
- start.S:0: warning: target CPU does not support interworking
- which come from some ARM cross compilers and are caused by hard-coded
- (with "--with-cpu=arm9" configuration option) ARM targets (which
- support ARM Thumb instructions), while the ARM target selected from
- the command line (with "-march=armv4") doesn't support Thumb
- instructions.
- This warning is issued by the compiler regardless of the real use of
- the Thumb instructions in code.
- To fix this problem, we use options according to compiler version
- being used.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4265c35fbcb248e58179007621d61d32d0b3b82a
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Thu Aug 14 14:08:28 2008 +0200
- ARM: Use do_div() instead of division for "long long".
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8febd13c69cb68652577d1a9fcbde954bf784155
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Jul 18 16:52:23 2008 +0200
- Update Freescale 85xx boards to sys_eeprom.c
- The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
- format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
- 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
- Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 8 23:26:22 2008 +0200
- lib_arm/bootm.c: fix compile warnings
- bootm.c:128: warning: label 'error' defined but not used
- bootm.c:65: warning: unused variable 'ret'
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2e3c867d0a63c563a51e65b776973b008f16cec5
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 8 22:46:42 2008 +0200
- ml507: fix out of tree build problem
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 8 22:10:28 2008 +0200
- common/cmd_bootm.c: fix printf() format warnings
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 8 22:37:45 2008 +0200
- BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
- missing doc_probe() prototype.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2c5e3cc4994897d364b148942ff23e47783198f6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 8 21:28:14 2008 +0200
- mk48t59: fix compile problem introduced by commit d1e23194
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5ff889349d2ace13f10c9335e09365fcec8247cc
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Sep 8 14:11:12 2008 +0200
- ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
- This patch moves some 4xx specific prototypes out of include common.h
- to a ppc4xx specific header.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ac53ee8318678190bf3c68da477a84a657d86fb0
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Sep 5 15:34:04 2008 +0200
- ppc4xx: Update CPCI405(AB) configuration
- This patch add FDT support and command line editing capabilities
- for CPCI405 and CPCI405AB boards.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Sep 5 15:34:03 2008 +0200
- ppc4xx: Cleanup CPCI405 linker script
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Sep 5 15:34:02 2008 +0200
- ppc4xx: Update CPCI405 variants handling
- This patch replaces the BOARD_REVISION variable in include/config.mk
- by a using a temporary include file in the platform directory.
- The former way does not work anymore and the latter is also used by
- some other boards.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Sep 8 10:01:48 2008 +0200
- ppc4xx: Remove CONFIG_CS8952_PHY define
- Since this define is only used on one board that was never really in
- production, removing this compile time option doesn't hurt and makes
- the code more readable.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Sep 5 14:11:40 2008 +0200
- ppc4xx: Fix compilation warning for PIP405
- This patch fixes a compilation warning for the PIP405 board. It moves the
- #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
- occur anymore. I am a little unsure if this #ifdef is at the correct
- place now or if it could be removed completely. This needs to get
- tested on the PIP405 board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Sep 5 14:09:09 2008 +0200
- ppc4xx: Fix compilation warning for canyonlands & glacier
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Sep 5 14:40:29 2008 -0500
- Fix compiler warning in mpc8xxx ddr code
- ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
- ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
- ctrl_regs.c:523: note: 'caslat' was declared here
- Add a warning in DDR1 case if cas_latency isn't a value we know about.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Sep 1 23:06:23 2008 +0200
- rtc: allow rtc_set to return an error and use it in cmd_date
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Sep 1 01:16:33 2008 +0200
- ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sun Aug 31 05:37:04 2008 +0900
- config.mk: Move arch-specific condition to $(ARCH)_config.mk
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 29 19:08:29 2008 -0500
- Prevent crash if random/invalid ramdisks are passed to bootm
- Adds returning an error from the ramdisk detection code if
- its not a real ramdisk (invalid). There is no reason we can't
- just return back to the console if we detect an invalid
- ramdisk or CRC error.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Aug 29 21:04:45 2008 +0200
- Prevent crash if random DTB address is passed to bootm
- This patch adds bootm_start() return value check. If
- error status is returned, we do not proceed further to
- prevent board reset or crash as we still can recover
- at this point.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
- Author: Andrew Dyer <adyer@righthandtech.com>
- Date: Fri Aug 29 12:30:39 2008 -0500
- clean up some #if !defined() in drivers/video/cfb_console.c
- rearrange some #if !defined() / #else / #endif statements to remove
- the negative logic.
- Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
- commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Fri Aug 29 09:02:20 2008 +0900
- apollon: use the last memory area for u-boot
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
- Author: Heiko Schocher <hs@denx.de>
- Date: Thu Aug 28 13:50:42 2008 +0200
- TQM8272: move NAND part in seperate File
- I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
- because I have no longer access to the hardware.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
- Author: Heiko Schocher <hs@denx.de>
- Date: Thu Aug 28 13:48:36 2008 +0200
- TQM8272: Fix compiling error for the TQM8272 board.
- Fix compile problems caused by
- commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 1a7f8ccec981648ccd38fca2535490582eee08e6
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Wed Aug 27 14:45:20 2008 +0900
- Add JFFS2 command support on OneNAND
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
- Author: Mark Jackson <mpfj@mimc.co.uk>
- Date: Mon Aug 25 19:21:30 2008 +0100
- Allow console input to be disabled
- Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.
- When CONFIG_DISABLE_CONSOLE is defined, setting
- GD_FLG_DISABLE_CONSOLE disables all console input and output.
- Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
- commit 2b22d608f370565c87f55928b524207031419c11
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Wed Jul 30 12:39:29 2008 +0200
- loads: allow negative offsets
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu Sep 4 11:19:05 2008 +0200
- USB EHCI: reset root hub
- Some of multi-function USB controllers (e.g. ISP1562) allow root hub
- resetting only via EHCI registers. So, this patch adds the
- corresponding kind of reset to OHCI's hc_reset() if the newly
- introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
- board).
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit 5875d358f025c1b042d8a0f08384b756de7256c9
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Fri Aug 15 15:42:09 2008 +0200
- RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Sep 5 10:47:46 2008 +0200
- devices: Use list_add_tail() instead of list_add() to register a device
- This patch fixes a problem spotted on Glacier/Canyonlands (and most
- likely lots of other board ports), that no serial output was seen
- after console initialization in console_init_r(). This is because the
- last added console device was used instead of the first added.
- This patch fixes this problem by using list_add_tail() instead of
- list_add() to register a device. This way the first added console
- is used again.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 78d78236896d62bb8ca7302af38d8f1493eb2651
- Author: Victor Gallardo <vgallardo@amcc.com>
- Date: Thu Sep 4 23:49:36 2008 -0700
- ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
- This patch adds GPCS, SGMII and M88E1112 PHY support
- for the AMCC PPC460GT/EX processors.
- Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
- Author: Adam Graham <agraham@amcc.com>
- Date: Wed Sep 3 12:26:59 2008 -0700
- ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
- Signed-off-by: Adam Graham <agraham@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 075d0b81e896e8735ae26372cd384f87cbd24e41
- Author: Adam Graham <agraham@amcc.com>
- Date: Wed Sep 3 12:26:28 2008 -0700
- ppc4xx: IBM Memory Controller DDR autocalibration routines
- Alternate SDRAM DDR autocalibration routine that can be generically used
- for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
- support of more DIMM/memory chip vendors and gets the DDR autocalibration
- values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).
- Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
- "Method_A" and "Method_B". DDR autocalibration Method_A scans the full range
- of possible PPC4xx SDRAM Controller DDR autocalibration values and takes a
- lot longer to run than Method_B. Method_B executes in the same amount of time
- as the currently existing DDR autocalibration routine, i.e. 1 second or so.
- Normally Method_B is used and it is set as the default method.
- The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
- Controller registers.[bit-field]:
- 1) SDRAM0_RQDC.[RQFD]
- 2) SDRAM0_RFDC.[RFFD]
- This alternate PPC4xx DDR autocalibration code calibrates the following
- IBM SDRAM Controller registers.[bit-field]:
- 1) SDRAM0_WRDTR.[WDTR]
- 2) SDRAM0_CLKTR.[CKTR]
- 3) SDRAM0_RQDC.[RQFD]
- 4) SDRAM0_RFDC.[RFFD]
- and will also use the calibrated settings of the above four registers that
- produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
- register.[bit-field].
- Signed-off-by: Adam Graham <agraham@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e07f4a8033b6270b8103049adb6456f660ff4a89
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Mon Sep 1 13:09:39 2008 -0400
- ppc44x: Unification of virtex5 pp440 boards
- This patch provides an unificated way of handling xilinx v5 ppc440 boards.
- It unificates 3 different things:
- 1) Source code
- A new board called ppc440-generic has been created. This board includes
- a generic tlb initialization (Maps the whole memory into virtual) and
- defines board_pre_init, checkboard, initdram and get_sys_info weakly,
- so, they can be replaced by specific functions.
- If a new board needs to redefine any of the previous functions
- (specific initialization) it can create a new directory with the
- specific initializations needed. (see the example ml507 board).
- 2) Configuration file
- Common configurations are located under configs/xilinx-ppc440.h, this
- header file interpretes the xparameters file generated by EDK and
- configurates u-boot in correspondence. Example: if there is a Temac,
- allows CMD_CONFIG_NET
- Specific configuration are located under specific configuration file.
- (see the example ml507 board)
- 3) Makefile
- Some work has been done in order to not duplicate work in the Main
- Makefile. Please see the attached code.
- In order to support new boards they can be implemented in the next way:
- a) Simple Generic Board (90% of the time)
- Using EDK generates a new xparameters.h file, replace
- ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config
- && make
- b) Simple Boards with special u-boot parameters (9 % of the time)
- Create a new file under configs for it (use ml507.h as example) and
- change your paramaters. Create a new Makefile paragraph and compile
- c) Complex boards (1% of the time)
- Create a new folder for the board, like the ml507
- Finally, it adds support for the Avnet FX30T Evaluation board, following
- the new generic structure:
- Cheap board by Avnet for evaluating the Virtex5 FX technology.
- This patch adds support for:
- - UartLite
- - 16MB Flash
- - 64MB RAM
- Prior using U-boot in this board, read carefully the ERRATA by Avnet
- to solve some memory initialization issues.
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Tue Sep 2 15:21:16 2008 -0500
- mpc83xx: fix mpc8313 in-tree building with NAND
- and add mpc8313 NAND build to MAKEALL
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Thu Aug 28 14:09:25 2008 -0700
- mpc83xx: clean up cache operations and unlock_ram_in_cache() functions
- Cleans up some latent issues with the data cache control so that
- dcache_enable() and dcache_disable() will work reliably (after
- unlock_ram_in_cache() has been called)
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Thu Aug 28 14:09:19 2008 -0700
- mpc83xx: Store and display Arbiter Event Register values
- Record the Arbiter Event Register values and optionally display them.
- The Arbiter Event Register can record the type and effective address of
- an arbiter error, even through an HRESET. This patch stores the values in
- the global data structure.
- Display of the Arbiter Event registers immediately after the RSR value
- can be enabled with defines. The Arbiter values will only be displayed
- if an arbiter event has occured since the last Power On Reset, and either
- of the following defines exist:
- #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
- and type register values
- #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter
- event register values
- Address Only transactions are one of the trapped events that can register
- as an arbiter event. They occur with some cache manipulation instructions
- if the HID0_ABE (Address Broadcast Enable) is set and the memory region
- has the MEMORY_COHERENCE WIMG bit set. Setting:
- #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
- only events, so that it can still capture
- other real problems.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Thu Aug 28 14:09:11 2008 -0700
- mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
- This is needed in unlock_ram_in_cache() because it is called from C and
- will corrupt the small data area anchor that is kept in R2.
- lock_ram_in_cache() is modified similarly as good coding practice, but
- is not called from C.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Fri Aug 22 23:52:50 2008 -0700
- MPC83XX: Fix GPIO configuration - set gpio level before direction
- Set DAT value before DIR values to avoid creating glitches on the
- GPIO signals.
- Set gpio level register before direction register to inhibit
- glitches on high level output pins.
- Dir and data gets cleared at powerup, so high level output lines see
- a short low pulse between setting the direction and level registers.
- Issue was seen on a new board with the nReset line of the NOR flash
- connected to a GPIO. Setting the direction register puts the NOR flash
- in reset so the next instruction to set the level cannot get executed.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 7007c5975ee900ad70983b0681d3251e221f8321
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Sep 2 02:58:32 2008 +0200
- doc/qemu_mips: add doc howto debug u-boot with gdb
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Sep 3 17:15:45 2008 +0200
- ppx4xx: Fix broken DASA_SIM board
- This patch adds initdram() to DASA_SIM boards that has been
- removed accidentally by a previous commit.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Sep 1 08:35:37 2008 +0200
- ppc4xx: Remove reference to common/lists.o from some esd linker scripts
- This patch removes some direct references to common/lists.o from some
- esd linker scripts. This is necessary because the lists source was moved
- and is not in the "common" directory anymore.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 97b0734d65f8a0b03df0a335a2addc759da56107
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 16:33:05 2008 +0200
- ppc4xx: Remove obsolete or unused functions from some esd boards
- This patch removes initdram() and testdram() from most esd 405 platforms.
- Some boards also have an empty dummy implementation of
- misc_init_f(). This is also removed.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 15:07:54 2008 +0200
- ppc4xx: Update VOM405 board configuration
- - remove PCI code
- - add command line editing
- - minor cleanup
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 15:07:53 2008 +0200
- ppc4xx: Remove obsolete initdram() function from VOM405 board
- This patch removed the obsolete initdram() function from
- VOM405 platform file.
- Some minor cleanup.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 15:07:52 2008 +0200
- ppc4xx: Cleanup VOM405 linker script
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
- Author: Matthias Fuchs <mf@esd.eu>
- Date: Tue Sep 2 15:07:51 2008 +0200
- ppc4xx: Add fdt support for VOM405 boards
- Signed-off-by: Matthias Fuchs <mf@esd.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 11:36:14 2008 +0200
- ppc4xx: Coding style cleanup
- Wrap long lines etc.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 11:35:56 2008 +0200
- ppc4xx: Enable USB on PLU405 boards
- This patch enables the PCI-OHCI controller on PLU405 board.
- Also the default CPU frequency is updated to 266 MHz and
- command line editing is enabled.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 11:35:35 2008 +0200
- ppc4xx: Cleanup PLU405 platform file
- This patch
- - wraps some long lines
- - removes unused/obsolete functions: misc_init_f() and initdram()
- Signed-off-by: Matthias Fuchs <mf@esd.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 11:35:04 2008 +0200
- ppc4xx: Cleanup PLU405 linker script
- Signed-off-by: Matthias Fuchs <mf@esd.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 11:34:36 2008 +0200
- ppc4xx: Add fdt support for PLU405 boards
- Signed-off-by: Matthias Fuchs <mf@esd.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 2 11:34:08 2008 +0200
- ppc4xx: Increase U-Boot size to 384kB for PLU405 boards
- Signed-off-by: Matthias Fuchs <mf@esd.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit be1b0d2777e179191a57b138b660547a17e55aad
- Author: Jochen Friedrich <jochen@scram.de>
- Date: Tue Sep 2 11:24:59 2008 +0200
- Don't tftp to unknown flash
- If a board has a variable number of flash banks, there are empty entries
- in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
- "Outside available Flash". This patch skips flash banks with unknown
- flash ids.
- Signed-off-by: Jochen Friedrich <jochen@scram.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Aug 28 13:40:44 2008 +0900
- net: smc911x: Add pkt_data_pull and pkt_data_push function
- The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
- Byte-swapping is necessary, and so poor performance is inevitable.
- This problem cannot evade by the swap function of CHIP, this can
- evade by software Byte-swapping.
- And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
- functions necessary to solve this problem.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 20:37:00 2008 -0700
- Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
- Affected boards:
- db64360
- db64460
- katmai
- taihu
- taishan
- yucca
- cpc45
- cpu87
- eXalion
- elppc
- debris
- kvme080
- mpc8315erdb
- integratorap
- ixdp425
- oxc
- pm826
- pm828
- pm854
- pm856
- ppmc7xx
- sc3
- sc520_spunk
- sorcery
- tqm8272
- tqm85xx
- utx8245
- Removed initialization of the driver from net/eth.c
- Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:45:44 2008 -0700
- Moved initialization of TULIP Ethernet controller to board_eth_init()
- Affected boards:
- cu824
- bab7xx
- adciop
- dasa_sim
- mousse
- mpc8540eval
- musenki
- mvblue
- pcippc2/pcippc6
- sbc8240
- stxssa
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:44:19 2008 -0700
- Moved initialization of E1000 Ethernet controller to board_eth_init()
- Affected boards:
- ap1000
- mvbc_p
- PM854
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:40:51 2008 -0700
- Moved initialization of plb2800 Ethernet driver to board_eth_init
- Affected boards:
- purple
- Removed initialization of controller from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:39:12 2008 -0700
- Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
- Modified board_eth_init() functions of boards that have this FEC in addition
- to other Ethernet controllers.
- Affected boards:
- bc3450
- icecube
- mvbc_p
- o2dnt
- pm520
- total5200
- tq5200
- Removed initialization of controller from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:36:38 2008 -0700
- Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
- Added a cpu_eth_init() function to MPC512x CPU directory and
- removed code from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 8218bd2aa68820b878a8413493ae17fd8d21f944
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:16:59 2008 -0700
- Moved initialization of IncaIP Ethernet controller to board_eth_init
- Affected boards:
- IncaIP
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:15:26 2008 -0700
- Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
- Affected boards:
- AmigaOneG3SE
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 6aca145e067efe75398e9fac97822bd3700de0b2
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:13:34 2008 -0700
- Moved initialization of GT6426x Ethernet controller to board_eth_init()
- Affected boards:
- EVB64260
- P3G4
- ZUMA
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit e3090534d62045dcb73f5392bacc64a4e8e443dc
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:08:43 2008 -0700
- Moved initialization of PCNET Ethernet controller to board_eth_init()
- Affected boards:
- PN62
- sc520_cdp
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:07:16 2008 -0700
- Moved initialization of NATSEMI Ethernet controller to board_eth_init()
- Affected boards:
- a3000
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 10:03:22 2008 -0700
- Moved initialization of NS8382X Ethernet controller to board_eth_init()
- Affected boards:
- bc3450
- cpci5200
- mecp5200
- pf2000
- icecube
- o2dnt
- pm520
- sandpoint8245
- total5200
- tqm5200
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 09:59:33 2008 -0700
- Moved initialization of TSI108 Ethernet controller to board_eth_init()
- Affected boards:
- mpc7448hpc2
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 0b252f50ae218ae15bfb63af44227972686ebc56
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 21:41:08 2008 -0700
- Moved initialization of RTL8139 Ethernet controller to board_eth_init()
- Affected boards:
- hidden_dragon
- MPC8544DS
- MPC8610HPCN
- R2DPLUS
- TB0229
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 09:49:42 2008 -0700
- Moved initialization of RTL8169 Ethernet controller to board_eth_init()
- Affected boards:
- linkstation
- r7780mp
- Removed initialization of the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 3ae071e44256144d6c1e3febb65f6c56bd433769
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Tue Aug 12 22:11:53 2008 -0700
- Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
- Removed at91sam9_eth_initialize() from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Aug 31 22:22:04 2008 -0700
- Introduce netdev.h header file and remove externs
- This addresses all drivers whose initializers have already
- been moved to board_eth_init()/cpu_eth_init().
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sun Aug 31 16:33:30 2008 -0500
- Add pixis_set_sgmii command
- The 8544DS and 8572DS platforms support an optional SGMII riser card to
- expose ethernet over an SGMII interface. Once the card is in, it is also
- necessary to configure the board such that it uses the card, rather than
- the on-board ethernet ports. This can either be done by flipping dip switches
- on the motherboard, or by modifying registers in the pixis. Either way
- requires a reboot.
- This adds a command to allow users to choose which ports are routed through
- the SGMII card, and which through the onboard ports. It also allows users
- to revert to the current switch settings.
- This code does not work on the 8572, as the PIXIS is different.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sun Aug 31 16:33:29 2008 -0500
- Add SGMII support for the 8544 DS
- The 8544 DS has an optional SGMII Riser card, which uses different PHY
- addresses. Check if we are in SGMII mode, and invoke the SGMII Riser
- setup code if so.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 652f7c2eef76a1340928bd660845441e932d86a2
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sun Aug 31 16:33:28 2008 -0500
- Add support for Freescale SGMII Riser Card
- The 8544DS and 8572DS systems have an optional SGMII riser card which
- exposes new ethernet ports which are connected to the eTSECs via an
- SGMII interface. The SGMII PHYs for this board are offset from the standard
- PHY addresses, so this code modifies the passed in tsec_info structure to
- use the SGMII PHYs on the card, instead.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sun Aug 31 16:33:27 2008 -0500
- Add SGMII support to the tsec
- Adds support for configuring the TBI to talk properly with the SerDes.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sun Aug 31 16:33:26 2008 -0500
- Pass in tsec_info struct through tsec_initialize
- The tsec driver contains a hard-coded array of configuration information
- for the tsec ethernet controllers. We create a default function that works
- for most tsecs, and allow that to be overridden by board code. It creates
- an array of tsec_info structures, which are then parsed by the corresponding
- driver instance to determine configuration. Also, add regs, miiregs, and
- devname fields to the tsec_info structure, so that we don't need the kludgy
- "index" parameter.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sun Aug 31 16:33:25 2008 -0500
- tsec: Move tsec.h to include/
- This is to prepare the way for board code passing in the tsec_info structure
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:52:44 2008 +0200
- PHY: Add support for the M88E1121R Marvell chip.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 2 21:17:36 2008 +0200
- fw_env.c: fix build problems with MTD_VERSION=old
- (as needed to support old 2.4 Linux kernel based releases)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Sep 1 17:11:26 2008 +0200
- device: make device_register() clone the device
- This is expected by the callers, but this fact was hidden well within
- the old list implementation.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c75e772a2f061a508bba28ded1b5bea91f0442b0
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Aug 31 23:28:15 2008 +0900
- sh: Remove CC line from board's Makefile
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 468eae0660de6fdfd9999944c536ecc4797bd944
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Aug 31 23:25:57 2008 +0900
- sh: Replaced "@./mkconfig" for @$(MKCONFIG)
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Aug 28 14:50:52 2008 +0900
- sh: Add support sh2 to MAKEALL
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6f3d8bb5faa12dbf3031382286784c978df038ee
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Aug 28 14:52:23 2008 +0900
- sh: Fix compile error rsk7203 board
- This boards used old type preprocessor.
- This patch fix compile error.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Aug 28 14:53:31 2008 +0900
- sh: Fix compile error sh7785lcr board
- This boards used old type preprocessor.
- This patch fix compile error.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6f0da4972e48f99d37bc522814940a6022cd3084
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Fri Aug 22 17:39:09 2008 +0900
- sh: Renesas Solutions AP325RXA board support
- AP325RXA is SH7723's reference board.
- This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
- In this patch, support SCIF, NOR Flash, and Ethernet.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit ab09f433b50bb83b5e440c335bc3839ee069e534
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Fri Aug 22 17:48:51 2008 +0900
- sh: add support Renesas SH7723
- Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
- This patch supports CPU register's header file and SCIF serial driver.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit c655fad06ba3fb042dbc667724a40e1a9a091248
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Aug 31 23:02:04 2008 +0900
- sh: Renesas RSK+ 7203 board support
- This adds initial support for the RTE RSK+ SH7203 board.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Jul 3 23:11:02 2008 +0900
- sh: Add support Renesas SH7203 processor
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Aug 31 22:48:33 2008 +0900
- sh: Add support SH2/SH2A which is CPU of Renesas Technology
- Add support SH2/SH2A basic function.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Aug 31 22:45:08 2008 +0900
- sh: Renesas R0P7785LC0011RL board support
- This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
- Graphic, Ethernet, USB, SD, RTC, and I2C controller.
- This patch supports the following functions:
- - 128MB DDR2-SDRAM (29-bit address mode only)
- - NOR Flash
- - USB host
- - Ethernet
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Thu Jul 10 19:32:53 2008 +0900
- sh: add support for SH7785
- Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
- This patch supports CPU register's header file.
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit d6e04258be8f2408845468d3cf722a4cf0433445
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Aug 31 04:45:42 2008 +0200
- davinci: fix remaining dm644x_eth
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Aug 31 04:24:56 2008 +0200
- fs: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Aug 31 04:24:55 2008 +0200
- devices: merge to list_head
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit ef0255fc75f28655f9681422079287d68a14dbaa
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Aug 31 04:24:51 2008 +0200
- update linux/list
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Aug 31 00:39:48 2008 +0200
- smdk6400: add gitignore
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Aug 31 00:39:48 2008 +0200
- smdk6400: Use CONFIG_FLASH_CFI_DRIVER
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:47 2008 +0200
- smdk6400: remove redundant bootargs definition
- Double bootargs setting leads to a duplicated environmant entry.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 11edcfe260f20dcea79284a3e95270989d433854
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:47 2008 +0200
- ARM: Add support for S3C6400 based SMDK6400 board
- SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
- driver for it too. The board can also boot from the NOR flash, but due to
- hardware limitations it can only address 64KiB on it, which is not enough
- for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit e0056b341069796eaea11eae0fc8eb93a3dceaac
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:47 2008 +0200
- NAND: add NAND driver for S3C64XX
- Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 3fe7b589f9c7463df39056f8872006a67f56a91c
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:47 2008 +0200
- S3C64XX: remove broken HWFLOW support from the serial driver
- As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
- broken and currently unused. Remove it.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:47 2008 +0200
- serial: add S3C64XX serial driver
- Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:46 2008 +0200
- USB: Add support for OHCI controller on S3C6400
- Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
- try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
- it should work too and we could still profit from instruction cache.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 9b07773f8883665b002500c190507e9fd99b7181
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Sun Aug 31 00:39:46 2008 +0200
- ARM: Add arm1176 core with S3C6400 SoC
- Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
- Author: Sandeep Paulraj <s-paulraj@ti.com>
- Date: Sun Aug 31 00:39:46 2008 +0200
- ARM DaVinci: Changing function names for EMAC driver
- DM644x is just one of a series of DaVinci chips that use the EMAC driver.
- By replacing all the function names that start with dm644x_* to davinci_*
- we make these function more portable. I have tested this change on my EVM.
- DM6467 is another DaVinci SOC which uses the EMAC driver and i will
- be sending patches that add DaVinci DM6467 support to the list soon.
- Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
- commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Sat Aug 30 23:21:30 2008 +0200
- Integrator[AP/CP] - Remove unused file memsetup.S
- - memsetup.s is changed/merged to lowlevel_init.S
- memsetup.S has a global label memsetup that just returns back to caller
- - memsetup global label is changed/merged to lowlevel_init
- This label is not called from anywhere.
- Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit 89d51d022a63be1a851eda983c8cbce1a044f65f
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Wed Aug 27 21:35:52 2008 +0200
- ARM DaVinci: Standardize names of directories/files
- ARM DaVinci: Standardize names of directories/files.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Fri Jul 11 15:10:13 2008 -0400
- ARM DaVinci: Move common functions to board/davinci/common
- ARM DaVinci: Move common functions to board/davinci/common.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit c2b4b2e4814f4ace9015fdb64132894327400bf0
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 29 11:56:49 2008 +0200
- ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
- This function is needed for the new NAND infrastructure. We only need
- a dummy implementation though for the NDFC.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 29 12:06:27 2008 +0200
- ppc4xx: Increase image size for NAND boot target
- This is needed since now with HUSH enabled (amcc-common.h) the image
- read from NAND exceeds the previous limit.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Thu Aug 28 23:58:30 2008 -0700
- Move MPC512x_FEC driver to drivers/net
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 80b00af01b3c9154774de2936f05a051e92f6a03
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Thu Aug 28 23:58:29 2008 -0700
- Move MPC5xxx_FEC driver to drivers/net
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 29 21:53:57 2008 +0200
- cmd_terminal: remove no need ifdef
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 578118bdf122877ae769776be002255be447b4fa
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 29 21:53:57 2008 +0200
- common/Makefile: order by functionality
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 29 21:53:56 2008 +0200
- miiphyutil: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 81789c39db3f0f6b621df8c0ec66014d701f368e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 29 21:53:37 2008 +0200
- autoscript: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 29 01:18:11 2008 +0200
- crc16: move to lib_generic
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 55195773eacefb22dd483a3c560ea30a14263ce1
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 29 01:18:01 2008 +0200
- miiphybb: move to drivers/net/phy
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit e8314035996a9118ac5948df2ff8a2f2161ed67a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Aug 28 12:31:51 2008 +0200
- soft_spi: move to drivers/spi
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Aug 28 12:31:51 2008 +0200
- soft_i2c: move to drivers/i2c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 717a222229fdb77703e9174d0eb08a4b41febf49
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Aug 28 12:31:48 2008 +0200
- gunzip: move to lib_generic
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 52aef8f9ba28b747973bf76741c23db658d5773c
- Author: Wolfgang Ocker <weo@reccoware.de>
- Date: Tue Aug 26 19:55:23 2008 +0200
- ppc4xx: NAND configuration
- Made NAND bank configuration setting a config variable.
- Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5bc542a593abc9e974fbd34704af85c37c366c60
- Author: Victor Gallardo <vgallardo@amcc.com>
- Date: Thu Aug 28 16:03:28 2008 -0700
- ppc4xx: fix UIC external_interrupt hang on UIC0
- This patch fixes a UIC external_interrupt hang if critical or non-critical
- interrupt is set at the same time as a normal interrupt is set on UIC0.
- Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
- Author: Prodyut Hazarika <phazarika@amcc.com>
- Date: Wed Aug 27 16:39:00 2008 -0700
- ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
- Removed Magic numbers from Initialization preload registers
- Tested with Kilauea, Glacier, Canyonlands and Katmai boards
- About 5-7% improvement seen for LMBench memtests
- Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8a490422bed685c9491274ec997f62061d88620b
- Author: John Rigby <jrigby@freescale.com>
- Date: Thu Aug 28 13:17:07 2008 -0600
- ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
- MPC5121 rev 2 silicon has a new register for controlling how long
- CS is asserted after deassertion of ALE in multiplexed mode.
- The default is to assert CS together with ALE. The alternative
- is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
- The default is wrong for the NOR flash and CPLD on the ADS5121.
- This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
- it does so conditionally based on silicon rev 2.0 or greater.
- Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit 5d9a5efa4b332f442b54a755d49969123c3a8742
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Aug 19 00:56:46 2008 +0600
- Add I2C frequency dividers for ColdFire
- The existing I2C freqency dividers for FDR does not apply
- to ColdFire platforms; thus, a seperate table is added
- based on MCF5xxx Reference Manual
- Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: Tabi Timur <timur@freescale.com>
- commit eec567a67e00d1ed8d941e9098b7d421f4091abf
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Aug 19 03:01:19 2008 +0600
- ColdFire: I2C fix for multiple platforms
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit d53cf6a9c7423cba668b867978648645f71c3090
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Aug 19 00:37:13 2008 +0600
- ColdFire: Add CONFIG_MII_INIT for M5272C3
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit f78ced3028d4130b24a318943a70cf5584ab16f4
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Aug 19 00:26:25 2008 +0600
- ColdFire: Multiple fixes for MCF5445x platforms
- Add FEC pin set and mii reset in __mii_init(). Change
- legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
- change cfi_offset to 0, and change CFG_FLASH_CFI to
- CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
- M54455EVB env settings in configuration file.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Fri Aug 15 18:24:25 2008 +0000
- ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
- The user manuals recommend 7.
- Signed-off-by: Kurt Mahan <kmahan@freescale.com>
- Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Fri Aug 15 16:50:07 2008 +0000
- ColdFire: Raise uart baudrate to 115200 bps
- M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
- uart baudrate increase from 19200 to 115200 bps
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit ab6ba842682552ccf071d0034da0a20633d1d1ac
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 13 12:07:03 2008 +0000
- ColdFire: Fix board.c warning message
- Implicit declaration of nand_init() warning message
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Aug 27 01:10:34 2008 -0500
- FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
- Author: Heiko Schocher <hs@denx.de>
- Date: Thu Aug 21 20:44:49 2008 +0200
- mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 19 14:46:36 2008 -0500
- mpc85xx: remove redudant code with lib_ppc/interrupts.c
- For some reason we duplicated the majority of code in lib_ppc/interrupts.c
- not show how that happened, but there is no good reason for it.
- Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
- they exist.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Jul 25 13:31:05 2008 -0500
- mpc85xx: Add support for the MPC8536DS reference board
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- Signed-off-by: Dejan Minic <minic@freescale.com>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 12 11:14:19 2008 -0500
- mpc85xx: Add support for the MPC8536
- The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We
- also have SERDES init code for the 8536.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- Signed-off-by: Dejan Minic <minic@freescale.com>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 12 11:13:08 2008 -0500
- mpc85xx: Add support for the MPC8572DS reference board
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 457caecdbca3df21a93abff19eab12dbc61b7897
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Aug 27 01:05:35 2008 -0500
- FSL DDR: Remove old SPD support from cpu/mpc85xx
- All 85xx boards have been converted to the new code so we can
- remove the old SPD DDR setup code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0e7927db138976469e7257e29c1338050a50fcd9
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Aug 27 01:04:07 2008 -0500
- FSL DDR: Convert STXSSA to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c360d9b970fbb9c13744c355879671165bbb9b9e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Aug 27 01:03:42 2008 -0500
- FSL DDR: Convert STXGP3 to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8e55313b7ae12352a343f9b9962e662dbd897187
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 23:52:58 2008 -0500
- FSL DDR: Convert SBC8560 to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 23:52:32 2008 -0500
- FSL DDR: Convert MPC8540EVAL to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 23:52:07 2008 -0500
- FSL DDR: Convert PM856 to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit d53bd3e17bd4f460257c19255569ea6dcfaae817
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 23:51:49 2008 -0500
- FSL DDR: Convert PM854 to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 33b9079ba20926f14238fff863b68a98e938948e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 23:15:28 2008 -0500
- FSL DDR: Convert sbc8548 to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 23:14:14 2008 -0500
- FSL DDR: Convert atum8548 to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit be0bd8234b9777ecd63c4c686f72af070d886517
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 22:56:56 2008 -0500
- FSL DDR: Convert socrates to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 08:02:30 2008 -0500
- FSL DDR: Convert MPC8544DS to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Mar 18 13:51:05 2008 -0500
- FSL DDR: Convert MPC8568MDS to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Mar 18 13:51:06 2008 -0500
- FSL DDR: Convert MPC8548CDS to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit aa11d85cf318b961e029fe50d68ca47d004bce93
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Mar 17 15:48:18 2008 -0500
- FSL DDR: Convert MPC8541CDS to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2b40edb10d81da7bba724edbccd7f53777112579
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Mar 18 11:12:42 2008 -0500
- FSL DDR: Convert MPC8555ADS to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Mar 18 11:12:44 2008 -0500
- FSL DDR: Convert MPC8560ADS to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Jun 6 13:12:18 2008 -0500
- FSL DDR: Convert MPC8540ADS to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 21:34:55 2008 -0500
- FSL DDR: Add 85xx specific register setting
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 6fb1b7346849ccd0c20306143e334f5b76143070
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jun 9 11:07:46 2008 -0500
- FSL DDR: Add e500 TLB helper for DDR code
- Provide a helper function that board code can call to map TLBs when
- setting up DDR.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit d26b739afe5a6760bd345743188759cd9d0f3b47
- Author: Andrew Dyer <adyer@righthandtech.com>
- Date: Tue Aug 26 17:03:38 2008 -0500
- dm9000 remove dead external phy support, gpio fix
- dm9000 has code to detect and initialize external phy parts, but later
- on in the code the part is forced to use the internal phy
- unconditionally. Remove the unused/untested code.
- change the GPIO initialization so that only the GPIO used as an
- internal phy reset (hardwired in the chip) is set as an output. The
- remaining GPIO need to be handled by board specific code to prevent
- possible drive conflicts. Set as inputs for safety.
- replace a few magic numbers with defines
- Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Tue Aug 26 11:17:48 2008 -0500
- Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
- cmd_net.c command descriptions were updated to describe the optional
- hostIPaddr argument. The dhcp command help message was also updated
- to more closely reflect the other commands in cmd_net.c
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Wed Aug 20 11:30:28 2008 +0200
- Fix bogus error message in the DHCP handler
- The DHCP handler has 1 state that is not listed in this case, causing a
- failure message when there is actually no failure.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Wed Aug 20 11:30:27 2008 +0200
- Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
- The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
- missing extern inside the net/bootp.h header
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 1803f7f91ff35ca402259065df7557107dcf28a2
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Aug 19 21:26:32 2008 +0000
- ColdFire: Add FEC Buffer descriptors in SRAM
- Add FEC Buffer descriptors and data buffer in SRAM for
- faster execution and access.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 429be27ce195210d4b9decf9e867b9ca6155a87d
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Aug 21 23:55:11 2008 +0000
- Fix ColdFire FEC warning messages
- Types mismatch and implicit declaration of icache_invalid()
- warning messages
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 6a002171098e968bd5b362347d2831224fab6048
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sat Jul 12 00:17:50 2008 -0700
- Moved initialization of SKGE Ethernet driver to board code.
- The only board using this driver is the SL8245 board.
- Removed initialization for the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sat Jul 12 00:08:45 2008 -0700
- Moved conditional compilation to Makefile for SK98 Ethernet driver
- Brute-force removal of #ifdefs. Didn't touch the code.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 65d3d99c28dc363d15eaee78225ff643df499b97
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Fri Jul 11 23:42:19 2008 -0700
- Moved initialization of ULI526X Ethernet driver to board code.
- The only board using this driver is the Freescale MPC8610HPCD board.
- Removed initialization for the driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Fri Jul 11 23:15:28 2008 -0700
- Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
- Added board_eth_init() function to bf537-stamp board.
- Removed initialization for the Blackin EMAC driver from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit fc363ce35408f348cacced68505f3747a53e3d7c
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Wed Jul 9 01:04:19 2008 -0700
- Moved initialization of GRETH Ethernet driver to CPU directory
- Added a cpu_eth_init() function to leon2/leon3 CPU directories and
- removed code from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Tue Aug 26 22:16:25 2008 -0700
- Moved initialization of MCFFEC Ethernet driver to CPU directory
- Added a cpu_eth_init() function to coldfire CPU directories and
- removed code from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Tue Aug 26 22:12:36 2008 -0700
- Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
- Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
- removed code from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:38 2008 -0500
- FSL DDR: Remove old SPD support from cpu/mpc86xx
- All 86xx boards have been converted to the new code so we can
- remove the old SPD DDR setup code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9bd4e5911b750837515466bc7449087698b88e0e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:37 2008 -0500
- FSL DDR: Convert SBC8641D to new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 26 15:01:36 2008 -0500
- FSL DDR: Convert MPC8610HPCD to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:35 2008 -0500
- FSL DDR: Convert MPC8641HPCN to new DDR code.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:34 2008 -0500
- FSL DDR: Add 86xx specific register setting
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 233fdd502a6c227f476212b3097653ad48d7e254
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:32 2008 -0500
- FSL DDR: Add DDR2 DIMM paramter support
- Compute DIMM parameters based upon the SPD information.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 05c05a2363a6ac11e0e405926034546ffad71fad
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:30 2008 -0500
- FSL DDR: Add DDR1 DIMM paramter support
- Compute DIMM parameters based upon the SPD information in spd.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:29 2008 -0500
- FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
- The main purpose of this rewrite it to be able to share the same
- initialization code on all FSL PowerPC products that have DDR
- controllers. (83xx, 85xx, 86xx).
- The code is broken up into the following steps:
- GET_SPD
- COMPUTE_DIMM_PARMS
- COMPUTE_COMMON_PARMS
- GATHER_OPTS
- ASSIGN_ADDRESSES
- COMPUTE_REGS
- PROGRAM_REGS
- This allows us to share more code an easily allow for board specific code
- overrides.
- Additionally this code base adds support for >4G of DDR and provides a
- foundation for supporting interleaving on processors with more than one
- controller.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f784e32b4bce0013983506b11af4b85b8ca3d36e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 26 15:01:28 2008 -0500
- FSL DDR: Provide a generic set_ddr_laws()
- Provide a helper function that will setup the last available
- LAWs (upto 2) for DDR. Useful for SPD/dyanmic DDR setting code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
- Author: James Yang <James.Yang@freescale.com>
- Date: Tue Aug 26 15:01:27 2008 -0500
- Add proper SPD definitions for DDR1/2/3
- Also adds helper functions for DDR1/2 to verify the checksum.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 285db74716c724ae8a0ff177878fd09a74428c7b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Aug 27 01:02:48 2008 +0200
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
- Author: Heiko Schocher <hs@denx.de>
- Date: Tue Aug 19 10:08:49 2008 +0200
- Add support for muas3001 board (MPC8270)
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 322098bff32410d2a00031649b47c4ec90a66d9a
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Tue Aug 19 08:31:18 2008 +0530
- common/cmd_load.c cleanup - remove unused variables
- - Remove unused global variable os_data_count.
- - Remove unused variable z.
- Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit 306620b762a4f9fa6678568ad2e8772dec145208
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Mon Aug 18 13:35:27 2008 +0200
- remove MVS1 board
- MVS1 board has reached end-of-life and can be removed completely.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:45 2008 -0500
- bootm: refactor do_reset and os boot function args
- There is no need for each OS specific function to call do_reset() we
- can just do it once in bootm. This means its feasible on an error for
- the OS boot function to return.
- Also, remove passing in cmd_tbl_t as its not needed by the OS boot
- functions. flag isn't currently used but might be in the future so
- we left it alone.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 40afac22a9c602e55c501c800f1c064324711b56
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:44 2008 -0500
- fdt: Added resize command
- Resize the fdt to size + padding to 4k boundary
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:43 2008 -0500
- fdt: refactor initrd related code
- Created a new fdt_initrd() to deal with setting the initrd properties
- in the device tree and fixing up the mem reserve. We can use this
- both in the choosen node handling and lets us remove some duplicated
- code when we fixup the initrd info in bootm on PPC.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:42 2008 -0500
- fdt: refactor fdt resize code
- Move the fdt resizing code out of ppc specific boot code and into
- common fdt support code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 396f635b8ff3ccbc38d75d5eda98444c6466810a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:41 2008 -0500
- bootm: refactor image detection and os load steps
- Created a bootm_start() that handles the parsing and detection of all
- the images that will be used by the bootm command (OS, ramdisk, fdt).
- As part of this we now tract all the relevant image offsets in the
- bootm_headers_t struct. This will allow us to have all the needed
- state for future sub-commands and lets us reduce a bit of arch
- specific code on SPARC.
- Created a bootm_load_os() that deals with decompression and loading
- the OS image.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:40 2008 -0500
- bootm: move lmb into the bootm_headers_t structure
- To allow for persistent state between future bootm subcommands we
- need the lmb to exist in a global state.
- Moving it into the bootm_headers_t allows us to do that.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 54f9c86691309b2f919f567f9255b8bcad2c7651
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:39 2008 -0500
- bootm: Set working fdt address as part of the bootm flow
- Set the fdt working address so "fdt FOO" commands can be used as part
- of the bootm flow. Also set an the environment variable "fdtaddr"
- with the value.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 06a09918f3903450313e2047a9cc258bf5872f46
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:38 2008 -0500
- bootm: refactor fdt locating and relocation code
- Move the code that handles finding a device tree blob and relocating
- it (if needed) into common code so all arch's have access to it.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:37 2008 -0500
- bootm: refactor ramdisk locating code
- Move determing if we have a ramdisk and where its located into the
- common code. Keep track of the ramdisk start and end in the
- bootm_headers_t image struct.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c160a9544743e80e8889edb2275538e7764ce334
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:36 2008 -0500
- bootm: refactor entry point code
- Move entry point code out of each arch and into common code.
- Keep the entry point in the bootm_headers_t images struct.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 20220d22b9f41446288588cd2e457e0077a18bed
- Author: Randy Vinson <rvinson@mvista.com>
- Date: Wed Aug 13 11:44:57 2008 -0700
- mpc7448hpc2: Fix PCI I/O space mapping.
- PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
- PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
- space such that 0xFA000000 in the processor's address space maps to 0
- on the PCI I/O bus.
- Signed-off-by Randy Vinson <rvinson@mvista.com>
- Acked-by: Roy Zang <tie-fei.zang@freescale.com>
- commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Wed Aug 13 18:10:26 2008 +0200
- i.MX31: Specify maintainers for i.MX31-based boards
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 26 15:01:28 2008 +0200
- ADS5121: adjust image addresses in RAM and flash
- Use the same mapping in flash as used by Linux
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 19f101412c16edee9fd55db4039e1d68a833b28b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 26 13:14:34 2008 +0200
- cmd_mem.c: Fix help message alignment
- Bug was introced by "Big white-space cleanup" (53677ef1)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Wed Aug 20 11:11:52 2008 +0200
- change mvBL-M7 default env and move to vendor subdir
- fix mvBL-M7 config and move to matrix_vision subdir
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Fri Aug 22 23:52:40 2008 -0700
- MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices
- This patch adds elements to the 83xx sysconf structure and #define values that are used
- by mpc83xx family devices.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 447ad5768abda669ac0e7f46fcdb62fbe828d637
- Author: Ira W. Snyder <iws@ovro.caltech.edu>
- Date: Fri Aug 22 11:00:15 2008 -0700
- MPC8349EMDS: Add PCI Agent (PCISLAVE) support
- Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
- PCI card rather than a host computer.
- Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 4ff9aea9d6b5602683a920951ef896996438af62
- Author: Ira W. Snyder <iws@ovro.caltech.edu>
- Date: Fri Aug 22 11:00:14 2008 -0700
- mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code
- This adds a helper function to unlock the PCI configuration bit, so that
- any extra PCI setup (such as outbound windows, etc.) can be done after
- using the 83XX_GENERIC_PCI code to set up the PCI bus.
- Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 162338e1fcde231ca4d562e5ebd7859456731691
- Author: Ira W. Snyder <iws@ovro.caltech.edu>
- Date: Fri Aug 22 11:00:13 2008 -0700
- MPC8349EMDS: use 83XX_GENERIC_PCI setup code
- Change the MPC8349EMDS board to use the generic PCI initialization code
- for the mpc83xx cpu.
- Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit f4e55a4941e8ba46bc06020b2747928adf8fdee7
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Aug 25 14:53:09 2008 -0500
- fix out of tree building
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit a49d10cf027d059ee15c262010a05cdaec0961e1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 25 23:45:41 2008 +0200
- Minor coding style cleanup, updte CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4d56e8dea670757c801a6a65531f02a8f981ce1f
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Aug 20 20:29:38 2008 +0200
- RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338)
- This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
- to combine both config options into one line. This even allows defining
- both options and not generating the target object twice.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 079edb913dbae147b50a488cf02e03f473fc5f28
- Author: Jens Gehrlein <sew_s@tqs.de>
- Date: Fri Jul 4 16:50:05 2008 +0200
- MX31: fix bit masks in function mx31_decode_pll()
- Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.
- Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
- commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Mon Aug 25 11:11:34 2008 +0200
- Correct ARM Versatile Timer Initialization
- - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
- -- Timer Value Register @ TIMER Base + 4 is Read-only.
- -- Prescale Value (Bits 3-2 of TIMER Control register)
- can only be one of 00,01,10. 11 is undefined.
- -- CFG_HZ for Versatile board is set to
- #define CFG_HZ (1000000 / 256)
- So Prescale bits is set to indicate
- - 8 Stages of Prescale, Clock divided by 256
- - The Timer Control Register has one Undefined/Shouldn't Use Bit
- So we should do read/modify/write Operation
- Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Mon Aug 25 11:30:29 2008 +0200
- Add ARM AMBA PL031 RTC Support
- Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- commit e39411674669cc880e1ec4a8ca4794fb15c33a45
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Tue Aug 19 16:21:03 2008 -0400
- ARM DaVinci: Removed redundant NAND initialization code.
- ARM DaVinci: Removed redundant NAND initialization code.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit b3fb663b20d995ca41327db877ddb168279b3f62
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Tue Aug 19 16:21:00 2008 -0400
- ARM DaVinci: Fix compilation error with new MTD code.
- ARM DaVinci: Fix compilation error with new MTD code.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Fri Aug 22 14:37:05 2008 -0400
- Add note on dereferencing /aliases pointers
- Replace the "must quote special characters" note with a hint on
- how to dereference /aliases pointers by omitting the leading "/".
- This feature was introduced by Kumar Gala as a libfdt enhancement
- in commit ed035708235332c3c117ee3bb1a426063f03cfcb.
- Example:
- => fdt print /aliases
- aliases {
- ethernet0 = "/qe@e0100000/ucc@2000";
- ethernet1 = "/qe@e0100000/ucc@3000";
- serial0 = "/soc8360@e0000000/serial@4500";
- serial1 = "/soc8360@e0000000/serial@4600";
- pci0 = "/pci@e0008500";
- };
- => fdt print ethernet0
- ucc@2000 {
- device_type = "network";
- compatible = "ucc_geth";
- cell-index = <0x1>;
- reg = <0x2000 0x200>;
- interrupts = <0x20>;
- interrupt-parent = <0x2>;
- local-mac-address = [00 00 00 00 00 00];
- rx-clock-name = "none";
- tx-clock-name = "clk9";
- phy-handle = <0x3>;
- phy-connection-type = "rgmii-id";
- pio-handle = <0x4>;
- };
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit feeca3f578b7f53c032ba203698751c982f8bf5a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Aug 14 08:28:19 2008 -0500
- libfdt: Add support for using aliases in fdt_path_offset()
- If the path doesn't start with '/' check to see if it matches some alias
- under "/aliases" and substitute the matching alias value in the path
- and retry the lookup.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: David Gibson <david@gibson.dropbear.id.au>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Wed Aug 6 14:50:49 2008 +1000
- libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()
- As well as fdt_subnode_offset(), libfdt includes an
- fdt_subnode_offset_namelen() function that takes the subnode name to
- look up not as a NUL-terminated string, but as a string with an
- explicit length. This can be useful when the caller has the name as
- part of a longer string, such as a full path.
- However, we don't have corresponding 'namelen' versions for
- fdt_get_property() and fdt_getprop(). There are less obvious use
- cases for these variants on property names, but there are
- circumstances where they can be useful e.g. looking up property names
- which need to be parsed from a longer string buffer such as user input
- or a configuration file, or looking up an alias in a path with
- IEEE1275 style aliases.
- So, since it's very easy to implement such variants, this patch does
- so. The original NUL-terminated variants are, of course, implemented
- in terms of the namelen versions.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit f171746f701ea58bf6a53e835b53d2aaebee0d81
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Tue Jul 29 14:51:22 2008 +1000
- libfdt: Forgot one function when cleaning the namespace
- In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
- libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
- chance of collisions with things from whatever package libfdt is
- embedded in, pulled into the libfdt build via that environment's
- libfdt_env.h.
- Except... I missed one. This patch applies the same treatment to
- _stringlist_contains(). While we're at it, also make it static since
- it's only used in the same file.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit 46390da15411351fc3b498bd8c1615f78fe80df0
- Author: Wolfram Sang <w.sang@pengutronix.de>
- Date: Wed Jul 9 11:22:44 2008 +0200
- libfdt: Improve documentation in libfdt.h
- Fix a few typos and mistakes.
- Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
- Acked-by: David Gibson <david@gibson.dropbear.id.au>
- commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Wed Jul 9 14:10:24 2008 +1000
- libfdt: Increase namespace-pollution paranoia
- libfdt is supposed to easy to embed in projects all and sundry.
- Often, it won't be practical to separate the embedded libfdt's
- namespace from that of the surrounding project. Which means there can
- be namespace conflicts between even libfdt's internal/static functions
- and functions or macros coming from the surrounding project's headers
- via libfdt_env.h.
- This patch, therefore, renames a bunch of libfdt internal functions
- and macros and makes a few other chances to reduce the chances of
- namespace collisions with embedding projects. Specifically:
- - Internal functions (even static ones) are now named _fdt_*()
- - The type and (static) global for the error table in
- fdt_strerror() gain an fdt_ prefix
- - The unused macro PALIGN is removed
- - The memeq and streq macros are removed and open-coded in the
- users (they were only used once each)
- - Other macros gain an FDT_ prefix
- - To save some of the bulk from the previous change, an
- FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) ==
- FDT_ALIGN(x, FDT_TAGSIZE)
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit c66830263af19831f2b7db307f79d1943febf7f9
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Mon Jul 7 10:14:15 2008 +1000
- dtc: Enable and fix -Wcast-qual warnings
- Enabling -Wcast-qual warnings in dtc shows up a number of places where
- we are incorrectly discarding a const qualification. There are also
- some places where we are intentionally discarding the 'const', and we
- need an ugly cast through uintptr_t to suppress the warning. However,
- most of these are pretty well isolated with the *_w() functions. So
- in the interests of maximum safety with const qualifications, this
- patch enables the warnings and fixes the existing complaints.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Mon Jul 7 10:10:48 2008 +1000
- dtc: Enable and fix -Wpointer-arith warnings
- This patch turns on the -Wpointer-arith option in the dtc Makefile,
- and fixes the resulting warnings due to using (void *) in pointer
- arithmetic. While convenient, pointer arithmetic on void * is not
- portable, so it's better that we avoid it, particularly in libfdt.
- Also add necessary definition of uintptr_t needed by David Gibson's
- changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition
- comes from stdint.h, which u-boot doesn't have). -- gvb
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd
- Author: Tirumala R Marri <tmarri@amcc.com>
- Date: Thu Aug 21 21:54:53 2008 -0700
- ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix
- During recent PCI-E tests it has been found that current
- driverl level and de-emphasis values are not set correctly.
- After sweeping throgh all de-ephasis values, it was found that
- 0x130 is a right value. Where 0x13 is driver level and 0 is
- de-emphasis.
- Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Wed Aug 20 20:46:56 2008 +0200
- Make the YAFFS filesystem work
- Recently the YAFFS filesystem support has been added to U-boot.
- However, just enabling CONFIG_YAFFS2 is not enough to get it working.
- ymount will generate an exception (when dereferencing mtd->readoob()), because
- the genericDevice is a null pointer. Further, a lot of logging is produced
- while using YAFFS fs, so logging should also be disabled.
- Both issues are solved by this patch.
- With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem
- in U-boot, as well as in Linux.
- Tested on a Atmel AT91SAM9261EK board.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Acked-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Tue Aug 19 08:42:53 2008 +0900
- Fix OneNAND read_oob/write_oob functions compatability
- Also sync with kernel OneNAND codes
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 8d765456c1d33f2010d2717ee58de7647fdc6346
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Aug 18 17:11:20 2008 -0500
- NAND: Remove delay from nand_boot_fsl_elbc.c.
- It was for debugging purposes, and shouldn't have been left in.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit f556483734126793522fb7a8cf36af90da78f084
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 21 11:05:03 2008 +0200
- ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch
- This patch fixes some minor issues introduced with the patch:
- ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika:
- - Rework memory-queue and PLB arbiter optimization code, that the
- local variable is not needed anymore. This removes one #ifdef.
- - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead
- of XXX+ 0x01). This was not introduced by Prodyut, just a
- copy-paste problem.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 079589bcfb24ba11068460276a3cc9549ab5346f
- Author: Prodyut Hazarika <phazarika@amcc.com>
- Date: Wed Aug 20 09:38:51 2008 -0700
- ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
- PPC405EX and PPC460EX/GT/SX
- - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
- processors
- - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
- across processors (405 and 440/460)
- - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
- processors
- - Add register bit definitions for Memory Queue Configuration registers
- Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ba37aa03287c5483c61c0a3e320c8888bee0143a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 19 15:41:18 2008 -0500
- fdt: rework fdt_fixup_ethernet() to use env instead of bd_t
- Move to using the environment variables 'ethaddr', 'eth1addr', etc..
- instead of bd->bi_enetaddr, bi_enet1addr, etc.
- This makes the code a bit more flexible to the number of ethernet
- interfaces.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4cacf7c64609839f809e2f9c45873f1d65861703
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 19 14:57:55 2008 +0200
- hush: Fix printf debug macro in hush.c so that it usable in U-Boot
- This patch changes the debug_printf() marco for U-Boot in hush.c and
- moves the definition of DEBUG_SHELL to a place that is actually compiled
- under U-Boot.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2
- Author: Heiko Schocher <hs@denx.de>
- Date: Tue Aug 19 09:57:41 2008 +0200
- cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
- Commit 00b1883a4cac59d97cd297b1a3a398db85982865
- missed a few boards:
- include/configs/M5253DEMO.h
- include/configs/ml507.h
- include/configs/redwood.h
- This patch fixes this.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 0768b7a872964085eece8d5e9fec9175e9deb161
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Mon Aug 18 13:41:27 2008 +0200
- Consolidate strmhz() implementation
- ARM, i386, m68k and ppc all have identical implementations of strmhz().
- Other architectures don't provide this function at all.
- This patch moves strmhz() into lib_generic, reducing code duplication
- and providing a more unified API across architectures.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit a928d0df211f1d829308d335d19be3ca42558dfc
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Mon Aug 18 12:02:51 2008 +0200
- fix mvbc_p board build warnings
- fix build warnings @ mvBC-P board by using correct types, i.e. change
- out_be32 to out_be16 and out_8 accordingly.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- commit a958b663d27f616bd1dfb720d1b476d1ecaaa569
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 16 18:54:27 2008 +0200
- Makefile: fix posix support on find
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit bef92e215d945cc574399c1a1b00a3a76d35aa03
- Author: Axel Beierlein <belatronix@web.de>
- Date: Sat Aug 16 00:30:48 2008 +0200
- Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards
- Tested with TQM5200S on STK52XX.200 Board
- Signed-off-by: Axel Beierlein <belatronix@web.de>
- commit 0800707b6d5041a840a65d556032c15c584b55f8
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Fri Aug 15 14:36:32 2008 -0500
- mod_i2c_mem() bugfix
- The last used chip, address, and address length were not being
- stored for the imm and imn commands.
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- commit 4afbef967275b2f636abae86f91b81becee7ad03
- Author: Steven A. Falco <sfalco@harris.com>
- Date: Fri Aug 15 15:37:31 2008 -0400
- Fix typo in spelling of ATAPI.
- Correct a small spelling mistake.
- Signed-off-by: Steven A. Falco <sfalco@harris.com>
- commit 36c2d3062ecc6ab85f8e237180eb134464c48418
- Author: Steven A. Falco <sfalco@harris.com>
- Date: Fri Aug 15 15:34:10 2008 -0400
- Add a hook to allow board-specific PIO mode setting.
- This patch adds a hook whereby a board-specific routine can be called to
- configure hardware for a PIO mode. The prototype for the board-specific
- routine is:
- int inline ide_set_piomode(int pio_mode)
- ide_set_piomode should be prepared to configure hardware for a pio_mode
- between 0 and 6, inclusive. It should return 0 on success or 1 on failure.
- Signed-off-by: Steven A. Falco <sfalco@harris.com>
- commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4
- Author: Steven A. Falco <sfalco@harris.com>
- Date: Fri Aug 15 15:29:12 2008 -0400
- Replace enums in ata.h with an include of libata.h
- This patch removes some enums from ata.h and replaces them with an
- include of libata.h. This way, we eliminate duplicated code, and
- prevent errors whereby the different versions could be out of sync.
- Signed-off-by: Steven A. Falco <sfalco@harris.com>
- commit 0de0afbca865ecf482b4d2b635236746def8518f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 15 18:32:41 2008 +0200
- coldfire: fix CFI drivers activation with new macro
- rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:35 2008 -0500
- fdt: fdt addr w/o any args reports back the current working address
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f953d99fd528a496b400a706b511eaf8e3ea66af
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:34 2008 -0500
- fdt: added the ability to set initrd start/end via chosen command
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ffa4bafacaef67058463b3d7d0099ced57569dd2
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:33 2008 -0500
- Add command to enable/disable interrupts
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Tue Aug 19 22:21:16 2008 -0700
- CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()
- This patch fixes a missing vendor code in the flash_real_protect() function.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Aug 19 16:53:39 2008 +0000
- CFI: Fix AMD Legacy sector protect
- New implement sector lock and unlock or softlock commands
- do not exist in AMD legacy flash. Thus, causing issue
- when erasing AMD legacy flash (such as lv040)
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 492671404140f09d5b21b3d2ce4e362c0692c069
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Aug 20 09:40:16 2008 +0200
- hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER
- CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 33eac2b3d946fc998a09245dfe54d017079b9056
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Aug 20 09:28:36 2008 +0200
- hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 25da0b84195fdda89a943b2d25757db5afeef5b8
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Aug 20 09:27:37 2008 +0200
- favr-32-ezkit: Fix printf format warnings
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri Aug 15 12:04:25 2008 +0200
- MAINTAINERS: Sort avr32 section alphabetically
- The rest of the MAINTAINERS file appears to be sorted
- almost-alphabetically, but entries for the newly added AVR32 boards were
- added somewhat randomly. This patch sorts the list alphabetically again.
- Also update my e-mail address. The old one still works, but it may not
- work forever.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 13b50fe3bc065c48911fa373231421280855a9d6
- Author: Mark Jackson <mpfj@mimc.co.uk>
- Date: Wed Jul 30 13:07:27 2008 +0100
- avr32: Add MIMC200 board
- The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
- 8MByte FLASH and 128KByte FRAM.
- Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Wed Jul 9 21:07:34 2008 +0900
- rtl8169: add support for RTL8110SCL
- This patch fixes a problem that RTL8110SCL started transfer
- with an incorrect memory address.
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 943b825bf15e6a28ac8328e0f6489478bceef1ea
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 25 15:48:52 2008 -0500
- Fix dm9000 receive status and len little endian issue
- The received status and len was in little endian
- format and caused the ethernet unable to proceed
- further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit fcd69a1a57fb2af4d26201422095a4be9f36963e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:32 2008 -0500
- Clean up usage of icache_disable/dcache_disable
- There is no point in disabling the icache on 7xx/74xx/86xx parts and not
- also flushing the icache. All callers of invalidate_l1_instruction_cache()
- call icache_disable() right after. Make it so icache_disable() calls
- invalidate_l1_instruction_cache() for us.
- Also, dcache_disable() already calls dcache_flush() so there is no point
- in the explicit calls of dcache_flush().
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Aug 15 08:24:31 2008 -0500
- Update linux bootm to support ePAPR client interface
- The ePAPR spec has some subtle differences from the current device
- tree based boot interface to the powerpc linux kernel. The powerpc
- linux kernel currently ignores the differences that ePAPR specifies.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit b734e5556a239b3be5f9693b2f4b4b739683ec16
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 18 23:50:20 2008 +0200
- Minor code cleanup: keep lists sorted.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d0039d4ed275e6ca09fb417895024ad02be118c4
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Wed Jul 23 19:10:14 2008 +0200
- Add support for ADT7460 I2C monitor chip
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Jul 14 19:45:45 2008 +0200
- video: Clean drivers/video/Makefile
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 871c18dd301752270e1f74328c846c3104be1e2e
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Jul 14 19:45:37 2008 +0200
- rtc: Clean drivers/rtc/Makefile
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Jul 14 19:45:35 2008 +0200
- i2c: Clean drivers/i2c/ Makefile
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Jul 9 22:30:30 2008 +0800
- Add 'license' command to U-Boot command line
- The 'license' command includes the U-Boot license (GPLv2) into the
- actual bootloader binary. The license text can be shown interactively
- at the U-Boot commandline.
- For products where the commandline can actually be accessed by the
- end user, this helps to prevent inadvertent GPL violations, since the
- GPLv2 license text can no longer be 'forgotten' to be included into
- the product.
- The 'license' command can be enabled by CONFIG_CMD_LICENSE.
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit fe2ce5500ebf43d79d227190bd2370232d5b113d
- Author: Harald Welte <laforge@gnumonks.org>
- Date: Sun Jul 6 15:56:38 2008 +0800
- add 'unzip' command to u-boot commandline
- [PATCH] add new 'unzip' command to u-boot commandline
- common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
- memory to memory, and option CONFIG_CMD_UNZIP to enable it
- Signed-off-by: Werner Almesberger <werner@openmoko.org>
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit 07efc9e321619c3dec213310c32e011aa6f02783
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 6 19:37:17 2008 -0500
- Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase
- The CFG_ENV_SIZE is not suitable used for SPI flash erase
- sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE.
- Add condition check if CFG_ENV_SIZE is larger than
- CFG_ENV_SECT_SIZE, calculate the right number of sectors for
- erasing.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Aug 11 15:54:25 2008 +0000
- ColdFire: Multiple fixes for M5282EVB
- Incorrect CFG_HZ value, change 1000000 to 1000.
- Rename #waring to #warning. RAMBAR1 uses twice
- in start.S, rename the later to FLASHBAR. Insert
- nop for DRAM setup. And, env_offset in linker file.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 10db3a17a278dd3a27668b31cb32cdd1476e9513
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Aug 11 15:26:43 2008 +0000
- ColdFire: Move m5282evb from board to board/freescale
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Aug 11 15:25:07 2008 +0000
- ColdFire: Move m5272c3 from board to board/freescale
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 659e9bad629a480f606b286d5703aef7159edf98
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Aug 11 15:23:16 2008 +0000
- ColdFire: Move m5271evb from board to board/freescale
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 05316f8ece8206339a208ec052f039cd0f7ca922
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Aug 11 13:41:49 2008 +0000
- ColdFire: Add M54451EVB platform support for MCF5445x
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 6 19:14:08 2008 -0500
- ColdFire: Add Serial Flash support for M54455EVB
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 9f751551456828b2d0ff417f10959fb0c7110bd0
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 23 20:38:53 2008 -0500
- ColdFire: Implement SBF feature for M5445EVB
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit a7323bba229203aae2604afde131ab47bad4eadc
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 23 17:53:36 2008 -0500
- ColdFire: Add SSPI feature for MCF5445x
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit b2d022d1ac3f59bffa9cec249341e77aea168abc
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 23 17:37:10 2008 -0500
- ColdFire: Use CFI Flash driver for M54455EVB
- Remove non-common flash driver in
- board/freescale/m54455evb/flash.c. The non-cfi flash will
- use CONFIG_FLASH_CFI_LEGACY to configure the flash
- attribute.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 23 17:11:47 2008 -0500
- ColdFire: Add M5253DEMO platform support for MCF5253
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 80ba61fd82569af40e04d4a089257b81881884f2
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 6 14:17:09 2008 -0500
- ColdFire: Raise M5253EVBE uart baudrate to 115200 bps
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit d361307e73ce1f6fc68760123f37d4876f851f3e
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 6 14:11:36 2008 -0500
- ColdFire: Fix M5253EVB dram bring up issue
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 4b0708093e15b412296328bf81325cf9b69fe512
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Aug 14 14:41:06 2008 +0200
- Coding Style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 68cf19aae48f2969ec70669604d0d776f02c8bc4
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Aug 13 18:24:05 2008 -0500
- socrates: Update NAND driver to new API.
- Also, fix some minor formatting issues, and simplify the handling of
- "state" for writes.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit ba22d10f39eaeedd035e8265616e31ff88e314d5
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Aug 13 18:03:40 2008 -0500
- quad100hd: Update NAND driver to new API.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit f64cb652a8a84c5c34d0afcbd7ffef886aa1d838
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Aug 13 17:53:48 2008 -0500
- m5373evb: Update NAND driver to new API.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 1a23a197c8722b805f40895544bbdb1a648c1c82
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Aug 13 17:04:30 2008 -0500
- s3c24x0: Update NAND driver to new API.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit aa5f75f20db8a7103fad9c34d6f1193e10d1890f
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Aug 13 15:56:00 2008 -0500
- at91: Update board NAND drivers to current API.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit d438d50848e9425286e5fb0493e0affb5a0b1e1b
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Wed Aug 13 09:11:02 2008 +0900
- Fix OneNAND build break
- Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
- - fix bufferram management at erase operation
- This patch includes the NAND/OneNAND state filed too.
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 9483df6408c25f16060432de3868901e352e23bc
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:43 2008 +0200
- drivers/mtd/nand_legacy: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit cc4a0ceeac5462106172d0cc9d9d542233aa3ab2
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:43 2008 +0200
- drivers/mtd/nand: Move conditional compilation to Makefile
- rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4fb09b81920e5dfdfc4576883186733f0bd6059c
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:42 2008 +0200
- drivers/mtd/onenand: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 00b1883a4cac59d97cd297b1a3a398db85982865
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:42 2008 +0200
- drivers/mtd: Move conditional compilation to Makefile
- rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7ba44a5521cdb7fa1c72864025cde1e21a6f6921
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:41 2008 +0200
- drivers/qe: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit ab6878c7bc68a7b5e5b731655bdc13221bbfc493
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:40 2008 +0200
- drivers/pci: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 55d6d2d39fe3fe87802e399aa17539368b495d2e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:40 2008 +0200
- drivers/misc: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 65e41ea0548b86e3d7892defac8e4dc1ea70aed1
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:40 2008 +0200
- drivers/input: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 88f57e093114a44aa9a858d52b099bcc52034a8c
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:39 2008 +0200
- drivers/dma: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1a02806c4b1b4a09ad4e95d3aac3783889e5f8d7
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:39 2008 +0200
- drivers/block: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1a6ffbfaf4353bec379ed1fcfc54b6f1a30af09a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:39 2008 +0200
- serial: move CFG_NS9750_UART to CONFIG_NS9750_UART
- move also conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6c58a030f86829fa4f0d4337cf4b794c41a1823e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:38 2008 +0200
- serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE
- move also conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d6e9ee92e890f67594ab150689510df361133ead
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:38 2008 +0200
- common: Move conditional compilation to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f5acb9fd9bba1160de3ef349c7d33fe510eda286
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Aug 13 01:40:09 2008 +0200
- mx31: move freescale's mx31 boards to vendor board dir
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8ed2f5f950e2581214d20b011a8f27a6396d65d2
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Jul 5 23:11:11 2008 +0200
- at91: move arch-at91sam9 to arch-at91
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 195ccfc5991d48764b2519941e3507f693851d5d
- Author: Fathi BOUDRA <fabo@debian.org>
- Date: Wed Aug 6 10:06:20 2008 +0200
- OneNAND: Fill in MTD function pointers for OneNAND.
- onenand_print_device_info():
- - Now returns a string to be placed in mtd->name,
- rather than calling printf.
- - Remove verbose parameter as it becomes useless.
- Signed-off-by: Fathi Boudra <fabo@debian.org>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit aa646643b6bc250cb3a4966bf728876e0c10d329
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Wed Aug 6 21:42:07 2008 +0200
- nand_spl: Support page-aligned read in nand_load, use chipselect
- Supporting page-aligned reads doesn't incure any sinificant overhead, just
- a small change in the algorithm. Also replace in_8 with readb, since there
- is no in_8 on ARM.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 4f32d7760a58fe73981b6edc0b0751565d2daa4c
- Author: Scott Wood <scottwood@freescale.com>
- Date: Tue Aug 5 11:15:59 2008 -0500
- NAND boot: Update large page support for current API.
- Also, remove the ctrl variable in favor of passing the constants
- directly, and remove redundant (u8) casts.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit e4c09508545d1c45617ba45391c03c03cbc360b9
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Jun 30 14:13:28 2008 -0500
- NAND boot: MPC8313ERDB support
- Note that with older board revisions, NAND boot may only work after a
- power-on reset, and not after a warm reset. I don't have a newer board
- to test on; if you have a board with a 33MHz crystal, please let me know
- if it works after a warm reset.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit acdab5c33f1ea6f5e08f06f08bc64af23ff40d71
- Author: Scott Wood <scottwood@freescale.com>
- Date: Thu Jun 26 14:06:52 2008 -0500
- mpc8313erdb: Enable NAND in config.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit c3db8c649c6ab3da2f1411c4c6d61aecea054aa4
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Jul 31 12:38:26 2008 +0200
- NAND: Do not write or read a whole block if it is larger than the environment
- Environment can be smaller than NAND block size, do not need to read a whole
- block and minimum for writing is one page. Also remove an unused variable.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit eafcabd15f00c142156235c519fcc55b10993241
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Sun Jun 22 16:30:06 2008 +0200
- NAND: chip->state does not always get set.
- Fixes an issue with chip->state not always being set causing troubles.
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde
- Author: Ilya Yanok <yanok@emcraft.com>
- Date: Mon Jun 30 15:34:40 2008 +0200
- NAND: Scan bad blocks lazily.
- Rather than scanning on boot, scan upon the first attempt to check the
- badness of a block. This speeds up boot when not using NAND, and reduces
- the likelihood of needing to reflash via JTAG if NAND becomes
- nonfunctional.
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit dfbf617ff055e4216f78d358b0867c548916d14b
- Author: Scott Wood <scottwood@freescale.com>
- Date: Thu Jun 12 13:20:16 2008 -0500
- NAND read/write fix
- Implement block-skipping read/write, based on a patch from
- Morten Ebbell Hestens <morten.hestnes@tandberg.com>.
- Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 984e03cdf1431bb593aeaa1b74c445d616f955d3
- Author: Scott Wood <scottwood@freescale.com>
- Date: Thu Jun 12 13:13:23 2008 -0500
- NAND: Always skip blocks on read/write/boot.
- Use of the non-skipping versions was almost always (if not always)
- an error, and no valid use case has been identified.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit e1c3dbada349992875934575c97b328ab2cb33ca
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Thu Jun 12 11:10:21 2008 -0500
- nand: fsl_upm: convert to updated MTD NAND infrastructure
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 300253306acc72b1b2e9faf0987f86551151d7cf
- Author: Scott Wood <scottwood@freescale.com>
- Date: Thu May 22 15:02:46 2008 -0500
- fsl_elbc_nand: Hard-code the FBAR/FPAR split.
- The hardware has separate registers for block and page-within-block,
- but the division between the two has no apparent relation to the
- actual erase block size of the NAND chip.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 9c814b0a716aae884bec977b9a032dfa59cfb79a
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Fri Mar 28 22:10:54 2008 +0300
- fsl_elbc_nand: workaround for hangs during nand write
- Using current driver elbc sometimes hangs during nand write. Reading back
- last byte helps though (thanks to Scott Wood for the idea).
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 9fd020d6b4b36b9fb67cd834bc1ae7fdba15ee9e
- Author: Scott Wood <scottwood@freescale.com>
- Date: Fri Mar 21 16:12:51 2008 -0500
- Freescale eLBC FCM NAND driver
- This is a driver for the Flash Control Machine of the enhanched Local Bus
- Controller found on some Freescale chips (such as the mpc8313 and the
- mpc8379).
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 41ef8c716e93fdf50efe9c1ba733ca6675daaca6
- Author: Scott Wood <scottwood@freescale.com>
- Date: Tue Mar 18 15:29:14 2008 -0500
- Don't panic if a controller driver does ecc its own way.
- Some hardware, such as the enhanced local bus controller used on some
- mpc83xx chips, does ecc transparently when reading and writing data, rather
- than providing a generic calculate/correct mechanism that can be exported to
- the nand subsystem.
- The subsystem should not BUG() when calculate, correct, or hwctl are
- missing, if the methods that call them have been overridden.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit e52b34d40a8a646e3d11638ea8797e96398dba13
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 10 18:47:33 2008 +0100
- NAND: Make NAND driver less verbose per default
- This patch turns off printing of bad blocks per default upon bootup.
- This can always be shown via the "nand bad" command later.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fe56a2772e5c59577df906163d0d4b29b056140e
- Author: Sergey Kubushyn <ksi@koi8.net>
- Date: Wed Jan 9 15:36:20 2008 +0100
- NAND: Davinci driver updates
- Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I
- don't have hardware handy so I can not test it at the moment but changes are
- rather trivial so it should work. It would be nice if somebody with a
- hardware checked it anyways.
- Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
- commit deac913effd8d80535c9ff4687b6fcdff540c554
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 5 16:50:32 2008 +0100
- NAND: Fix compilation warning and small coding style issue
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c568f77acdf896fc3dd6413ce53205b17ba809a3
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 5 16:49:37 2008 +0100
- NAND: Update nand_spl driver to match updated nand subsystem
- This patch changes the NAND booting driver nand_spl/nand_boot.c to match
- the new infrastructure from the updated NAND subsystem. This NAND
- subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
- subsystem.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3df2ece0f0fbba47d27f02fff96c533732b98c14
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 5 16:47:58 2008 +0100
- NAND: Update 4xx NDFC driver to match updated nand subsystem
- This patch changes the 4xx NAND driver ndfc.c to match the new
- infrastructure from the updated NAND subsystem. This NAND
- subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
- subsystem.
- Tested successfully on AMCC Sequoia and Bamboo.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 12072264528eba33737bc9674e19f0e925ffda23
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 5 16:43:25 2008 +0100
- NAND: Change nand_wait_ready() to not call nand_wait()
- This patch changes nand_wait_ready() to not just call nand_wait(),
- since this will send a new command to the NAND chip. We just want to
- wait for the chip to become ready here.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9ad754fef5053144daed3b007adaf1c9bec654c9
- Author: William Juul <william.juul@datarespons.no>
- Date: Fri Dec 14 16:33:45 2007 +0100
- make nand dump and nand dump.oob work
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 43ea36fb8fdcbc6e26f0caffe808c63633b18838
- Author: William Juul <william.juul@datarespons.no>
- Date: Mon Nov 19 14:46:00 2007 +0100
- moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks
- Signed-off-by: William Juul <william.juul@tandberg.com>
- commit 98824ce3f95e6c4d08d439b779c0acb0048045a6
- Author: William Juul <william.juul@tandberg.com>
- Date: Tue Jun 10 16:18:13 2008 -0500
- Clean out unneeded files
- Signed-off-by: William Juul <william.juul@tandberg.com>
- commit ec29a32b5a71b203f7d9087f1f4d786e7f13dd23
- Author: William Juul <william.juul@datarespons.no>
- Date: Fri Nov 16 08:44:27 2007 +0100
- Create symlinks from yaffs2/direct to yaffs2
- Signed-off-by: William Juul <william.juul@tandberg.com>
- commit 90ef117b68387d66763291af0117677644166611
- Author: William Juul <william.juul@datarespons.no>
- Date: Thu Nov 15 12:23:57 2007 +0100
- Incorporate yaffs2 into U-boot
- To use YAFFS2 define CONFIG_YAFFS2
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 0e8cc8bd92257da2e1df88cbc985e166e472ce61
- Author: William Juul <william.juul@datarespons.no>
- Date: Thu Nov 15 11:13:05 2007 +0100
- YAFFS2 import
- Direct import of yaffs as a tarball as of 20071113 from their public
- CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/
- The code can also be imported on the command line with:
- export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon
- (Hit return when asked for a password)
- cvs checkout yaffs2
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
- commit 3043c045d5a9897faba7d5c7218c2f4d06cd0038
- Author: William Juul <william.juul@datarespons.no>
- Date: Wed Nov 14 14:28:11 2007 +0100
- Whitespace cleanup and marking broken code.
- Changes requested by maintainer Stefan Roese after
- posting patch to U-boot mailing list.
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 5e1dae5c3db7f4026f31b6a2a81ecd9e9dee475f
- Author: William Juul <william.juul@datarespons.no>
- Date: Fri Nov 9 13:32:30 2007 +0100
- Fixing coding style issues
- - Fixing leading white spaces
- - Fixing indentation where 4 spaces are used instead of tab
- - Removing C++ comments (//), wherever I introduced them
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 4cbb651b29cb64d378a06729970e1e153bb605b1
- Author: William Juul <william.juul@datarespons.no>
- Date: Thu Nov 8 10:39:53 2007 +0100
- Remove white space at end.
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
- Author: William Juul <william.juul@datarespons.no>
- Date: Wed Oct 31 13:53:06 2007 +0100
- Update MTD to that of Linux 2.6.22.1
- A lot changed in the Linux MTD code, since it was last ported from
- Linux to U-Boot. This patch takes U-Boot NAND support to the level
- of Linux 2.6.22.1 and will enable support for very large NAND devices
- (4KB pages) and ease the compatibility between U-Boot and Linux
- filesystems.
- This patch is tested on two custom boards with PPC and ARM
- processors running YAFFS in U-Boot and Linux using gcc-4.1.2
- cross compilers.
- MAKEALL ppc/arm has some issues:
- * DOC/OneNand/nand_spl is not building (I have not tried porting
- these parts, and since I do not have any HW and I am not familiar
- with this code/HW I think its best left to someone else.)
- Except for the issues mentioned above, I have ported all drivers
- necessary to run MAKEALL ppc/arm without errors and warnings. Many
- drivers were trivial to port, but some were not so trivial. The
- following drivers must be examined carefully and maybe rewritten to
- some degree:
- cpu/ppc4xx/ndfc.c
- cpu/arm926ejs/davinci/nand.c
- board/delta/nand.c
- board/zylonite/nand.c
- Signed-off-by: William Juul <william.juul@tandberg.com>
- Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit cd82919e6c8a73b363a26f34b734923844e52d1c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 12 16:08:38 2008 +0200
- Coding style cleanup, update CHANGELOG, prepare release
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 17e900b8c0f38d922da47073246219dce2a847f2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 12 14:54:04 2008 +0200
- MVBC_P: fix compile problem
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 52b047ae48219b59bebe37ba743ab103fd4f8316
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 12 12:10:11 2008 +0200
- MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c9c101c660b3d1995045c61c7c6041f52b6cf335
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 12 00:36:53 2008 +0200
- ads5121: fix compiler warnings (unused variables)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 902ca09246039964d59bbcb519b1e1b5aed01308
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Aug 11 11:29:28 2008 -0500
- 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
- Use CONFIG_NUM_CPUS to match existing define used by 86xx.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 3216ca9692ff80d7c638723ef448f3d36301d9e7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Aug 11 09:20:53 2008 -0500
- Fix fallout from autostart revert
- The autostart revert caused a bit of duplicated code as well as
- code that was using images->autostart that needs to get removed so
- we can build again.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3cf8a234b8e8c02e4da1f23566043bc288b05220
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Aug 11 09:16:25 2008 -0500
- Fix compile error related to r8a66597-hcd & usb
- When building the 8544DS board we get this error:
- In file included from r8a66597-hcd.c:22:
- u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
- make[1]: *** [r8a66597-hcd.o] Error 1
- The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
- is set.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2d0daa03612338a813e3c9d22680e54eabfea378
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Aug 4 14:02:26 2008 -0500
- POWERPC 86xx: Move BAT setup code to C
- This is needed because we will be possibly be locating
- devices at physical addresses above 32bits, and the asm
- preprocessing does not appear to deal with ULL constants
- properly. We now call write_bat in lib_ppc/bat_rw.c.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 9de67149db576c91b9c2a0a182652331e7e44211
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Aug 4 14:01:53 2008 -0500
- POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c
- Perform sync/isync as required by the architecture.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 23f935c073e7578c6066804fd2f9ee116cae6ffe
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Aug 4 14:01:16 2008 -0500
- POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 5276a3584d26a9533404f0ec00c3b61cf9a97939
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Sun Aug 3 21:44:10 2008 +0200
- i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.
- Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
- contacts instead of only the first 256 ones as is the case prior to
- this patch.
- Add missing MUX_* macros and update board files to use the new macros.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Sun Aug 3 21:43:37 2008 +0200
- i.MX31: Fix IOMUX related typos
- Correct the names of some IOMUX macros.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0
- Author: Steve Sakoman <steve@sakoman.com>
- Date: Mon Aug 11 20:26:16 2008 +0200
- OneNAND: Remove unused parameters to onenand_verify_page
- The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.
- Signed-off-by: Steve Sakoman <steve@sakoman.com>
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit e84d568fa2a9f4ce7888141e71676368ef6b3f25
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Aug 8 18:00:40 2008 +0200
- video: fix bug in cfb_console code
- FILL_15BIT_555RGB macro extension for pixel swapping
- by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
- introduced a bug in cfb_console:
- Bitmaps with odd-numbered width won't be rendered
- correctly and even U-Boot crashes are observed on
- some platforms while repeated rendering of such
- bitmaps with "bmp display". Also if a bitmap is
- rendered to an odd-numbered x starting position,
- the same problem occurs. This patch is an attempt
- to fix it.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit d9015f6a50d7258125349ef5c2af836458a0029a
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Aug 8 18:00:39 2008 +0200
- video: fix bug in logo_plot
- If logo_plot() should ever be called with x starting
- position other than zero and for pixel depths greater
- than 8bpp, logo colors distortion will be observed.
- This patch fixes the issue.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 406819ae94f79f5b59e01d163380ca7d83709251
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 11 00:17:52 2008 +0200
- MAINTAINERS: sort entries
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc
- Author: Roy Zang <tie-fei.zang@freescale.com>
- Date: Thu Aug 7 18:19:28 2008 +0800
- Add mpc7448hpc2 maintainer information
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Thu Aug 7 13:13:27 2008 +0530
- common/cmd_load.c - Minor code & Coding Style cleanup
- - os_data_header Variable is a carry over feature
- & unused. So removed all instance of this variable
- - Minor Code Style Update
- Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Wed Aug 6 19:32:33 2008 +0200
- Update the U-Boot wiki URL.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754
- Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
- Date: Sun Aug 10 17:56:36 2008 +0200
- OneNAND: Remove base address offset usage
- While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
- using OneNAND and some using NAND, we found some differences in OneNAND and
- NAND command address handling.
- As this might confuse users (it already confused us), we like to align OneNAND
- and NAND address handling.
- The issue is that cmd_onenand.c subtracts the onenand base address from the
- addresses you type into the u-boot command line so, unlike nand, you can't
- use addresses relative to the start of the onenand part e.g. this won't work:
- onenand read 82000000 280000 400000
- you have to use:
- onenand read 82000000 20280000 400000
- Looking at recent git, the only board currently using OneNAND is Apollon, and
- for this the OneNAND base address is 0 (apollon.h)
- #define CFG_ONENAND_BASE 0x00000000
- so patch below won't break any existing boards and will align OneNAND and NAND
- handling on boards where OneNAND base address is != 0.
- Signed-off-by: Steve Sakoman <sakoman@gmail.com>
- Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit c11528083ef6e55e76df742228c26e39d151813d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Aug 7 09:28:20 2008 -0500
- mpc85xx: workaround old binutils bug
- The recent change to move the .bss outside of the image gives older
- binutils (ld from eldk4.1/binutils-2.16) some headache:
- ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
- ppc_85xx-ld: final link failed: Bad value
- We workaround it by being explicit about the program headers and not
- assigning the .bss to a program header.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0bf202ec586d4466c900e987720fa635c594d689
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 10 01:26:26 2008 +0200
- Revert "[new uImage] Add autostart flag to bootm_headers structure"
- This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.
- The commit was based on a misunderstanding of the (documented)
- meaning of the 'autostart' environment variable. It might cause
- boards to hang if 'autostart' was used, with the potential to brick
- them. Go back to the documented behaviour.
- Conflicts:
- common/cmd_bootm.c
- common/image.c
- include/image.h
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Aug 9 23:17:32 2008 +0200
- TQM8xx{L,M}: try to normalize config files for TQM8xx? based board
- - enable CFI driver where this was forgotten
- - enable mtdparts support
- - adjust default environment
- etc.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 41266c9b5a5f873df3ec891bb0907616958b5602
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Tue Aug 5 10:51:57 2008 -0500
- FIT: Fix handling of images without ramdisks
- boot_get_ramdisk() should not treat the case when a FIT image does
- not contain a ramdisk as an error.
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- Acked-by: Michal Simek <monstr@monstr.eu>
- commit f77d92a3f56d88e63cc02226a1204b3bdbac6961
- Author: Sergey Lapin <slapin@ossfans.org>
- Date: Sat Aug 9 01:39:09 2008 +0400
- DataFlash: AT45DB021 fix and AT45DB081 support
- Fix for page size of AT45DB021. Also adding bigger AT45DB081
- which comes with some newer boards.
- Signed-off-by: Sergey Lapin <slapin@ossfans.org>
- commit ba9324451b662dd393afa53e5cc36fc5d3d10966
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Fri Aug 8 16:30:23 2008 +0900
- sh: Update sh7763rdp config
- Add sh_eth support to sh7763rdp.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- commit 21f971ec265f6042ec21636d55d06a6bc0751077
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 7 01:22:29 2008 +0200
- TQM823L: re-enable logo support; update LCD_INFO text
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Aug 8 16:41:56 2008 +0200
- TQM8xxL: fix support for second flash bank
- When switching the TQM8xxL modules to use the CFI flash driver,
- support for the second flash bank was broken because the CFI driver
- did not support dynamically sized banks. This gets fixed now.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2a112b234d879f6390503a5f4e38246acce9d0b0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Aug 8 16:39:54 2008 +0200
- CFI: allow for dynamically determined flash sizes and addresses
- The CFI driver allowed only for static initializers in the
- CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
- several flash banks contiguously if the bank sizes were not known in
- advance, which kind of violates U-Boot's design philosophy.
- (will be used for example by the TQM8xxL boards)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Thu Aug 7 23:26:35 2008 -0700
- QE UEC: Fix compiler warnings
- Moved static functions earlier in file so forward declarations are not needed.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit d5d28fe4aad5f4535400647a5617c11039506467
- Author: David Saada <David.Saada@ecitele.com>
- Date: Mon Mar 31 02:37:38 2008 -0700
- QE UEC: Add MII Commands
- Add MII commands to the UEC driver. Note that once a UEC device is selected,
- any device on its MDIO bus can be addressed.
- Signed-off-by: David Saada <david.saada@ecitele.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Wed Jul 9 21:07:38 2008 +0900
- usb: add support for R8A66597 usb controller
- add support for Renesas R8A66597 usb controller.
- This patch supports USB Host mode.
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 1d10dcd041aaeae9fd7c821005692898a0303382
- Author: Hunter, Jon <jon-hunter@ti.com>
- Date: Sat Jul 26 18:59:16 2008 -0500
- Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c
- Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.
- Signed-off-by: Jon Hunter <jon-hunter@ti.com>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit eab1007334b93a6209f1ec33615e26ef5311ede7
- Author: Steven A. Falco <sfalco@harris.com>
- Date: Wed Aug 6 15:42:52 2008 -0400
- ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
- The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
- configuration to match the schematic, and also sets the SDR0_PFC1 register to
- select the corresponding mode for the UARTs.
- Signed-off-by: Steven A. Falco <sfalco@harris.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5
- Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
- Date: Wed Aug 6 14:42:13 2008 +0200
- avr32: add support for EarthLCD Favr-32 board
- This patch adds support for the Favr-32 board made by EarthLCD.
- This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
- has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
- Ethernet, audio out, USB device, SD-card slot, USART and various other
- connectors for cennecting stuff to SPI, I2C, GPIO, etc.
- Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit bc9019e19758a19a388fb20ef18dc771cd39fdda
- Author: Rafael Campos <rafael.campos@hanscan.com>
- Date: Thu Jul 31 10:22:20 2008 +0200
- cfi-flash: Added support to flash_real_protect for Atmel flash devices
- Some of the flash memories produced by ATMEL start in read-only mode.
- We need to unprotect it. This patch allows the AT49BV6416 to work with
- cfi_flash memories. Tested in the at91rm9200ek board.
- Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7949839e5836bf8b1074bb6142c46d30ac3aa350
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Aug 5 15:36:39 2008 +0200
- cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1318673045fe188c6e24c582b1e6efc00ae1c62c
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Aug 6 14:06:03 2008 +0200
- Fix merge problems
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f2302d4430e7f3f48308d6a585320fe96af8afbd
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Aug 6 14:05:38 2008 +0200
- Fix merge problems
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d
- Author: Kenneth Johansson <kenneth@southpole.se>
- Date: Tue Jul 15 12:13:38 2008 +0200
- mpc5121: Move iopin features from board specific to common files.
- And in the process eliminate some duplicate register defines.
- Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
- commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12
- Author: John Rigby <jrigby@freescale.com>
- Date: Tue Aug 5 17:38:57 2008 -0600
- mpc5121: squash some fdt fixup errors
- On ADS5121 when booting linux the following errors are seen:
- Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
- Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
- Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND
- This is caused by ft_cpu_setup trying to deal with
- both old and new soc node naming. This patch
- fixes this by being smarter about what to
- fixup.
- Also do soc node fixups by compatible instead of by path.
- A new board config called OF_SOC_COMPAT defined
- to be "fsl,mpc5121-immr" replaces the old
- OF_SOC node path that was defined to be "soc@80000000".
- Old device trees still work, but the compatiblity
- is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
- which is on by default in include/configs/ads5121.h.
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 2 23:48:30 2008 +0200
- drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4cd7e6528f61ec669755c3754bb4f9779874fab3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 2 23:48:32 2008 +0200
- nios2/sysid: fix printf warning
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 66da6fa0e35e7ee56628c85981709afe7180fc8e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 2 23:48:33 2008 +0200
- Fix remaining build issues with MPC8xx FADS boards.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 2 23:48:31 2008 +0200
- nios2: fix phys_addr_t and phys_size_t support
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Aug 2 23:48:34 2008 +0200
- mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f
- Author: Mark Jackson <mpfj@mimc.co.uk>
- Date: Fri Aug 1 09:48:29 2008 +0100
- Fix bitmap display for atmel lcd controller
- The current lcd_display_bitmap() function does not work properly
- for the Atmel LCD controller.
- 2 fixes need to be done:-
- (a) when setting the colour map, use the lcd_setcolreg() function
- as provided by the Atmel driver
- (b) the data is never actually written to the lcd framebuffer !!
- Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
- commit 2a433c66b1e2770349fe4911be23c375f053ebd8
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Aug 1 08:40:34 2008 +0200
- qemu_mips: update README to follow qemu update about default machine
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit ac169d645f5f0e0b9a232563099209e92a355d8e
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 31 19:53:21 2008 -0500
- ColdFire: Fix compilation issue caused by a missing function
- Implement usec2ticks() which is used by fsl_i2c.c in
- lib_m68k/time.c
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 31 19:53:06 2008 -0500
- Fix compilation error for TASREG
- TASREG is ColdFire platform, the include ppc4xx.h in
- board/esd/common/flash.c causes conflict.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 31 19:52:36 2008 -0500
- Fix compilation error for MCF5275
- Rename OBJ to COBJ in board/platform/Makefile
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 5c40548f01218360a1f1395198c50ff45f3035b5
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 31 19:52:28 2008 -0500
- Fix compile error caused by incorrect function return type
- Rename int mii_init(void) to void mii_init(void) for idmr
- ColdFire platform
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit a58c78067c928976c082c758d3987e89ead5b191
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Aug 1 12:06:22 2008 +0200
- Fix build issues with MPC8xx FADS boards.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 31 17:54:03 2008 +0200
- Prepare v1.3.4-rc2: update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
- Author: Mark Jackson <mpfj@mimc.co.uk>
- Date: Thu Jul 31 16:09:00 2008 +0100
- Add gzipped logo support
- The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
- If this option is set, additionally to standard BMP
- images, gzipped BMP images can be displayed via the
- splashscreen support or the bmp command.
- However, the splashscreen function *only* supports standard BMP images.
- This patch adds the documented gzip support.
- Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
- commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
- Author: Mark Jackson <mpfj@mimc.co.uk>
- Date: Thu Jul 31 15:56:48 2008 +0100
- Fix Atmel LCD controller endianess for AVR32 processors
- The Atmel lcd controller is used on Atmel's AT91 (little endian) and
- AVR32 (big endian) platforms.
- As such, the controller can handle both big and little endian memory.
- This patch fixes the driver for the AVR32 platform.
- Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
- commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Jul 31 15:56:01 2008 +0200
- apollon: fix build out of tree
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2e752be39d3e398d4ab89ffa6634c397df298297
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Jul 31 12:35:04 2008 +0200
- Uncompressed images loaded to their start address shall set load_end too
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit c37207d7f51e19c17f859966f314e27cc1231801
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 16 16:38:59 2008 +0200
- Fix printf() format problems with configurable prompts
- U-Boot allows for configurable prompt strings using the
- CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
- the assumption was that any such user defined problts would contain
- exactly one "%d" format specifier. But some boards did not.
- To allow for flexible boot prompts without adding too complex code we
- now allow to specify the whole list of printf() arguments in the user
- definition. This is powerful, but requires a responsible user who
- really understands what he is doing, as he needs to know for exanple
- which variables are available in the respective context.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 54754120637b6a7f4ff774fb199fc550bcfea1da
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 31 17:02:14 2008 +0200
- TQM85xx: fix typo introduce by commit ffbb5cb9
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 31 15:27:01 2008 +0200
- mvbc_p board: fix most build warnings.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c4ec6db074051d2f6fc76a66411c60621b22bc02
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 31 13:57:20 2008 +0200
- E1000: clean up CONFIG_E1000_FALLBACK_MAC handling
- Avoid "integer constant is too large for 'long' type" warnings.
- And simplify the code.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 9196b44334c330cc13de2464c59181e4db71f549
- Author: Matvejchikov Ilya <matvejchikov@gmail.com>
- Date: Wed Jul 30 23:21:19 2008 +0400
- 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI
- Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
- commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
- Author: Matvejchikov Ilya <matvejchikov@gmail.com>
- Date: Wed Jul 30 23:20:32 2008 +0400
- PPC: Add pci_clk in the global_data for CPM2 processors
- This patch adds pci_clk field to the global_data structure for the
- processors which have CPM2 module in case the CONFIG_PCI is defined.
- Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
- commit f0ff885ca64655bee6540eb8a25eed90b1152686
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jul 30 14:13:30 2008 -0500
- mpc85xx: Update linker scripts for Freescale boards
- * Move to using absolute addressing always. Makes the scripts a bit more
- portable and common
- * Moved .bss after the end of the image. These allows us to have more
- room in the resulting binary image for code and data.
- * Removed .text object files that aren't really needed
- * Make sure _end is 4-byte aligned as the .bss init code expects this.
- (Its possible that the end of .bss isn't 4-byte aligned)
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jul 30 08:01:15 2008 -0500
- Fix compile warnings in dlmalloc
- The origional code was using on odd reference to get to the first
- real element in av_[]. The first two elements of the array are
- not used for actual bins, but for house keeping. If we are more
- explicit about how use the first few elements we can get rid of the
- warnings:
- dlmalloc.c: In function 'malloc_extend_top':
- dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
- dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
- dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
- ...
- The logic of how this code came to be is:
- bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ
- SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
- bin_at(0) = &(av_[0])
- Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jul 30 10:21:01 2008 +0200
- ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jul 30 09:59:51 2008 +0200
- cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'
- A recent patch used '#if (CONFIG_CMD_USB)' instead of
- '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
- common/bootm.c compile again.
- Signed-off-by: Stefan Roese <sr@denx.de>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Tue Jul 22 08:01:43 2008 +0900
- Remove unused I2C at apollon board
- There are no I2C devices on this board.
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 3c95960e526b3b026da20201db64526f46faf14b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 31 10:12:09 2008 +0200
- at91rm9200dk, csb637: fix NAND related build problems
- Tried fixing NAND support for the at91rm9200dk board; untested.
- Disabled NAND support in the csb637 board config file.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 9246f5ecfd353ae297a02ffd5328402acf16c9dd
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Wed Jul 30 12:39:28 2008 +0200
- ppc4xx: ML507: Environment in flash and MTD Support
- - Relocate the location of U-Boot in the flash
- - Save the environment in one sector of the flash memory
- - MTD Support
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a8a16af4d59d14cc1c1187c10aaad80d6b8394b5
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Tue Jul 29 17:16:10 2008 +0200
- ppc4xx: ML507: Use of get_ram_size in board ml507
- - Change suggested by WD
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 01a004313c5ec2d128b611df4c208b1b0d3c3fb4
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Mon Jul 21 20:30:07 2008 +0200
- ppc4xx: ML507: U-Boot in flash and System ACE
- This patch allows booting from FLASH the ML507 board by Xilinx.
- Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783
- Author: Julien May <mailinglist@miromico.ch>
- Date: Mon Jun 23 13:57:52 2008 +0200
- Add support for the hammerhead (AVR32) board
- The Hammerhead platform is built around a AVR32 32-bit microcontroller
- from Atmel. It offers versatile peripherals, such as ethernet, usb
- device, usb host etc.
- The board also incooperates a power supply and is a Power over Ethernet
- (PoE) Powered Device (PD).
- Additonally, a Cyclone III FPGA from Altera is integrated on the board.
- The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
- DDR2 SDRAM interfaces, which will cover even the most exceptional need
- of memory bandwidth. Together with the onboard video decoder the board
- is ready for video processing.
- For more information see: http:///www.miromico.com/hammerhead
- Signed-off-by: Julien May <mailinglist@miromico.ch>
- [haavard.skinnemoen@atmel.com: various small fixes and adaptions]
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Jul 29 12:23:49 2008 -0500
- fsl_i2c: Use timebase timer functions instead of get_timer()
- The current implementation of get_timer() is only really useful after we
- have relocated u-boot to memory. The i2c code is used before that as part
- of the SPD DDR setup.
- We actually have a bug when using the get_timer() code before relocation
- because the .bss hasn't been setup and thus we could be reading/writing
- a random location (probably in flash).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
- Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
- Date: Tue Jul 29 14:49:31 2008 +0200
- Adder8xx: Fix CFG_MONITOR_LEN
- Due to increased space usage, U-Boot can no longer be stored in three sectors.
- The current U-Boot use just over three flash sectors (197k), and U-Boot will
- become corrupt after saving environment variables. This patch adds another 64k
- to CFG_MONITOR_LEN.
- Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
- commit a4c59ad4a21140550ada6f97690d2527c4146ce5
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Tue Jul 29 08:47:57 2008 +0900
- Add OneNAND IPL related files to gitignore
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 8d87589e8e874df7120a3d9667f051bc33bac250
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Mon Jul 28 20:38:25 2008 +0200
- API: Teach the storage layer about SATA and MMC options.
- Signed-off-by: Rafal Czubak <rcz@semihalf.com>
- Acked-by: Rafal Jaworowski <raj@semihalf.com>
- commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Mon Jul 28 20:37:48 2008 +0200
- API: Dump contents of sector 0 in the demo application.
- Signed-off-by: Rafal Czubak <rcz@semihalf.com>
- Acked-by: Rafal Jaworowski <raj@semihalf.com>
- commit 13ca6305f2eba49c175f6370c35286141059c789
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Mon Jul 28 20:37:10 2008 +0200
- API: Correct storage enumeration routine, other minor fixes in API storage area.
- Signed-off-by: Rafal Czubak <rcz@semihalf.com>
- Acked-by: Rafal Jaworowski <raj@semihalf.com>
- commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Mon Jul 28 20:36:19 2008 +0200
- API: Fix compilation warnings in api_examples/demo.c.
- Signed-off-by: Rafal Czubak <rcz@semihalf.com>
- commit c14eefcc48212af2f3314809605698dd8393a90a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Jul 27 17:09:43 2008 +0200
- Fix more printf() format warnings
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 936897d4d1365452bbbdf8430db5e7769ef08d38
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Jul 25 15:18:16 2008 +0200
- Fix remaining CFG_CMD_ define, ifdef and comments
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 5d1d00fb36005482e1803a00ddc46efa11d719af
- Author: Stefano Babic <sbabic@denx.de>
- Date: Fri Jul 25 08:57:40 2008 +0200
- Add include for config.h in command.h.
- Because the cmd_tbl_s structure depends on the configuration file, it
- must be assured that config.h is included before the structure is
- evaluated by the compiler. If this is not certain, it could happen
- that the compiler generates structures of different size, depending
- on the fact if the source file includes <config.h> before or after
- <command.h>.
- The effect is that u-boot crashes when tries to relocate the command
- table (for ppc) or try to access to the command table for other
- architectures.
- The problem can happen on board-depending commands. All general
- commands under /common are unaffected, because they include already
- config.h before command.h.
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Jul 23 13:16:06 2008 -0500
- NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.
- This fixes building out-of-tree.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
- Author: Heiko Schocher <hs@denx.de>
- Date: Wed Jul 23 07:30:46 2008 +0200
- Fix warnings if compiling with IDE support.
- cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
- cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 7610db17fd4d59c51d825488526d85ede2f06767
- Author: Adrian Filipi <adrian.filipi@eurotech.com>
- Date: Tue Jul 22 14:28:11 2008 -0400
- Removed support for the adsvix board.
- Support for the adsvix was originally provided by Applied Data
- Systems (ADS), inc., now EuroTech, Inc.
- The board never shipped aside from some sample boards.
- Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
- commit f96b44cef897bd372beb86dde1b33637c119d84d
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jul 22 16:22:11 2008 +0200
- ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
- If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
- never set, because relocation to RAM is actually never done by U-boot
- itself. However, several pieces of code check if this flag is set at
- some time.
- So, to make sure this flag is set on boards skipping relocation, this
- is added to the initialisation of U-boot at a moment where it is safe
- to do so.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
- Author: Timur Tabi <timur@freescale.com>
- Date: Mon Jul 21 14:26:23 2008 -0500
- fsl-i2c: fix writes to data segment before relocation
- Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
- relocation. Commit d8c82db4 added the ability for i2c_init() to program the
- I2C bus speed and save the value in i2c_bus_speed[], which is a global
- variable. It is an error to write to the data segment before relocation,
- which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
- Author: Wolfgang Ocker <weo@reccoware.de>
- Date: Mon Jul 28 16:56:51 2008 +0200
- mips: Fix baudrate divisor computation on alchemy cpus
- Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
- on alchemy cpus.
- Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit c8c845cfdc6d0217135c1d5927eebd2b133a3314
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sat Jul 5 00:08:48 2008 -0700
- Moved initialization of AVR32 Ethernet controllers to board_eth_init()
- Renamed initialization functions for atngw100 and atstk1000.
- Removed initializations for these boards from net/eth.c
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Jul 23 10:55:46 2008 +0200
- spi flash: Fix printf() format warnings
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Jul 23 10:55:31 2008 +0200
- atmel_mci: Fix printf() format warnings
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Jul 23 10:55:15 2008 +0200
- avr32: Fix printf() format warnings
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Jul 23 10:52:19 2008 +0200
- avr32: asm/io.h needs asm/types.h
- map_physmem() takes a phys_addr_t as parameter. This type is defined in
- asm/types.h, so we need to include that file.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
- Author: Michal Simek <monstr@monstr.eu>
- Date: Thu Jul 17 12:25:46 2008 +0200
- microblaze: Fix printf() format issues
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Thu Jul 17 07:27:51 2008 +0530
- Remove unused code from lib_arm/bootm.c
- Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
- Author: Detlev Zundel <dzu@denx.de>
- Date: Wed Jul 16 18:56:45 2008 +0200
- tqm85xx: Demystify 'DK: !!!' comment
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit b2f44ba570f3a01113bbb745daf46f3858d22f53
- Author: Detlev Zundel <dzu@denx.de>
- Date: Wed Jul 16 18:56:44 2008 +0200
- 83xx/85xx/86xx: Add LTEDR local bus definitions
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Wed Jul 16 16:22:32 2008 +0200
- serial_xuartlite.c: fix compiler warnings
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 18 11:03:35 2008 +0200
- POST: Add disable interrupts in some of the missing CPU POST tests
- Some CPU POST tests did not disable the interrupts while running. This
- seems to be necessary to protect this self modifying code.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 97a3bf268d096e0e97e54048448c35114edcf557
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 18 10:43:24 2008 +0200
- ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
- This is needed for boards that define CFG_64BIT_STRTOUL but don't define
- CFG_64BIT_LBA.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0043ac55024963295fc79b39af85b6dc3b261e17
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Fri Jul 18 11:22:23 2008 +0200
- POST PPC4xx/spr IVPR only if PPC440
- The SPR IVPR register is only present (as far as I know) for
- processors with a PPC440 core.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 18 10:42:29 2008 +0200
- ppc4xx: Enable 64bit printf format on 440/460 platforms
- This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
- 440/460 platforms. This may be needed since those platforms support
- 36bit physical address space.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 18 15:57:23 2008 +0200
- ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
- This patch fixes a problem with incorrect MODTx (On Die Termination)
- setup for a configuration with multiple DIMM's and multiple ranks.
- Without this change Katmai was unable to boot Linux with DDR2 frequency
- >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
- with DDR2 frequency = 640MHz and mem=4GB.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 60204d06ed9f8c2a67cc79eb67fd2b1d22bcbc8c
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 18 12:24:41 2008 +0200
- ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 086511fc96a8a9bb56e5e19a3d84c40f4dba80cc
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Thu Jul 17 12:47:09 2008 +0200
- ppc4xx: ML507 Board Support
- The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
- among others:
- -Virtex 5 FX FPGA (With a ppc440x5 in it)
- -256MB of SDRAM2
- -32MB of Flash
- -I2C Eeprom
- -System ACE chip
- -Serial ATA connectors
- -RS232 Level Conversors
- -Ethernet Transceiver
- This patch gives support to a standard design produced by EDK for this
- board: ppc440, uartlite, xilinx_int and flash
- - Includes Changes propossed by Stefan Roese and Michal Simek
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Acked-by: Stefan Roese <sr@denx.de>
- commit d865fd09809a3a18669f35f970781820af40e4de
- Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Date: Thu Jul 17 11:44:12 2008 +0200
- ppc4xx: CPU PPC440x5 on Virtex5 FX
- -This patchs gives support for the embbedded ppc440
- on the Virtex5 FPGAs
- -interrupts.c divided in uic.c and interrupts.c
- -xilinx_irq.c for xilinx interrupt controller
- -Include modifications propossed by Stefan Roese
- Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 340ccb260f21516be360745d5c5e3bd0657698df
- Author: Sebastian Siewior <bigeasy@linutronix.de>
- Date: Wed Jul 16 20:04:49 2008 +0200
- cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
- This got broken by commits 93c56f212c
- [cfi_flash: support of long cmd in U-boot.]
- That command needs to be in little endian format on BE machines
- with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
- gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
- the cmdbuf in case portwidth = chipwidth = 8bit.
- Cc: Alexey Korolev <akorolev@infradead.org>
- Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
- Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
- commit 11188d55bc16dd907451c00282e00a038f73dd62
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 17 10:40:51 2008 +0200
- ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 021f6df6e96af5b387810cf96d24848da1faa55c
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Thu Jul 10 17:20:51 2008 +0400
- 83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup
- The thinko was quite silly indeed, I messed with !ptr. Normally this
- would trigger some fault, but in U-Boot NULL pointer is equal to phys
- 0, so the code was working still, just didn't actually test mpc8315erdb
- environment variable value. Heh.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Tue Jul 8 21:00:04 2008 +0400
- 83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs
- Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI
- support, or without TSEC1 but with USB ULPI PHY support in addition.
- With this patch user can specify desired USB PHY.
- Also, it seems that we can't distinguish the two boards in software, so
- user have to set `mpc8315erdb' environment variable to either 'tsec1'
- (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that
- Linux will not probe for TSEC1.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Tue Jul 8 20:59:43 2008 +0400
- fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups
- Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
- MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
- (connected to the four-ports hub, usb host only).
- This patch implements support for passing Dual-Role USB controller's
- device tree property phy_type through the usb_phy_type environment
- variable.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 699f05125509249072a0b865c8d35520d97cd501
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Jul 15 22:22:44 2008 +0200
- Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit bcab74baa6b1b1c969038ab6f64a186239180405
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Tue Jul 15 11:23:02 2008 -0400
- Round the serial port clock divisor value returned by calc_divisor()
- Round the serial port clock divisor value returned by
- calc_divisor()
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 0328ef0edfe950f0b7b8b368dae482531506b74a
- Author: Robin Getz <rgetz@blackfin.uclinux.org>
- Date: Tue Jul 15 21:44:46 2008 +0200
- Fix DHCP protocol so U-Boot does not respond too early
- on the network with it's offered IP number; it should not reply until
- after it has received a DHCP ACK message. Also ensures that U-Boot
- does it's DHCPREQUEST as broadcast (per RFC 2131).
- Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
- Acked-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
- Author: Sebastian Siewior <bigeasy@linutronix.de>
- Date: Tue Jul 15 13:35:23 2008 +0200
- cfi_flash: make the command u32 only
- This got changed by commit 93c56f212c
- [cfi_flash: support of long cmd in U-boot.]
- Long is the wrong type because it will behave differently on 64bit
- machines in a way that is probably not expected. u32 should be
- enough.
- Cc: Alexey Korolev <akorolev@infradead.org>
- Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
- Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
- commit 31cfe57491b183acae575d486729e158f016c27b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Jul 14 23:48:41 2008 +0200
- tools/gitignore: update to all generated files
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Wed Jul 9 18:30:44 2008 +0200
- mpc5xxx: Add MVBC_P board support
- The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
- controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit e2d31fb3450653115452144363d5bde4e5e3e693
- Author: Timur Tabi <timur@freescale.com>
- Date: Thu Jun 19 17:56:11 2008 -0500
- Update Freescale sys_eeprom.c to handle CCID formats
- Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
- NXID format replaces the older CCID format, but it's important to support both
- since most boards out there still use the CCID format. This change is in
- preparation for using one file to handle both formats. This will also unify
- EEPROM support for all Freescale 85xx and 86xx boards.
- Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
- instead of ID_EEPROM_ADDR.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Fri Jul 11 17:22:43 2008 +0900
- pci: sh: Add pci_skip_dev and pci_print_dev function
- Add function of new PCI, pci_skip_dev and pci_print_dev.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 1107014e835ec9d46c0333f4211d104f77442db0
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jul 14 20:29:07 2008 -0500
- Clean up INIT_RAM options
- The L2_INIT_RAM option was unused, and recent changes to the TLB code
- meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce
- the amount of mapped space attached to nothing, we change things so the TLBs
- get cleared.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 4524561820a9327e89107854b3a7187800ccf719
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jul 14 20:26:57 2008 -0500
- Remove fake flash bank from 8544 DS
- The fake flash bank was generating errors for anyone who didn't have a
- PromJET hooked up to the board. As that constitutes the vast majority of
- users, we remove it.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jul 14 14:07:03 2008 -0500
- MPC8544DS: Add ATI Video card support
- Add support for using a PCIe ATI Video card on PCIe2.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jul 14 14:07:02 2008 -0500
- 85xx: Add some L1/L2 SPR register definitions
- Add new L1/L2 SPRs related to e500mc cache config and control.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e5852787f0c3c442a276262f13d91ca450605ac0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jul 14 14:07:01 2008 -0500
- MPC8544DS: Report board id, board version and fpga version.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 73f15a060f67a2462551c334215bd20fac6b81d1
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jul 14 14:07:00 2008 -0500
- 85xx: Cleanup L2 cache size detection
- The L2 size detection code was a bit confusing and we kept having to add
- code to it to handle new processors. Change the sense of detection so we
- look for the older processors that aren't changing.
- Also added support for 1M cache size on 8572.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c3ca7e5e00a24451f20df3bded9a61ba541921df
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Fri Jul 11 15:33:08 2008 -0400
- sbc8560: enable CONFIG_OF_LIBFDT by default
- Make the default build for the sbc8560 board be powerpc
- capable with libfdt support.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jul 14 20:04:40 2008 -0500
- Fix indentation for default boot environment variables
- This was proposed by Paul Gortmaker in response to Wolfgang's comments on
- similar #defines in sbc8560.h.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Fri Jul 11 15:33:07 2008 -0400
- sbc8560: add default fdt values
- Add in the default fdt settings and the typical EXTRA_ENV
- settings as borrowed from the mpc8560ads. Fix a couple
- of stale references to the mpc8560ads dating back to the
- original clone/fork.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit d04e76edf92f7f89696989e8702b97e020455af3
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Fri Jul 11 15:33:06 2008 -0400
- sbc8560: add in ft_board_setup()
- Add in for the sbc8560, the ft_board_setup() routine, based on what is
- in use for the Freescale MPC8560ADS board.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit c158bcaca3b31cbe38c4143812e6170e38a57393
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Fri Jul 11 15:33:05 2008 -0400
- sbc8560: define eth0 and eth1 instead of eth1 and eth2
- The existing config doesn't define CONFIG_HAS_ETH0, and so the
- fdt support doesn't update the zeros in the dtb local-mac with
- real data from the u-boot env. Since the existing config is
- tailored to just two interfaces, get rid of the ETH2 definitions
- at the same time.
- Also don't include any end user specific data into the environment
- by default -- things like MAC address, network parameters etc. need
- to come from the end user.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Fri Jul 11 15:33:04 2008 -0400
- sbc8560: properly set cs0_bnds for 512MB
- The sbc8560 board ships with 512MB of memory installed,
- but the current cs0_bnds is hard coded for 256MB. Set the
- value based on CFG_SDRAM_SIZE.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Fri Jul 11 15:33:03 2008 -0400
- sbc8560: proper definitions for TSEC.
- The definitions for the TSEC have become out of date. There is no
- longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
- Update to match those of other boards, like the MPC8560ADS.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- Acked-by: Ben Warren <biggerbadderben@gmail.com>
- commit 71074abbe0c76429577aff58aeff0a24ad210b23
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Wed Jul 9 13:23:05 2008 -0400
- 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
- Some boards that have external 16550 UARTs don't have a direct
- tie between bi_busfreq and the clock used for the UARTs. Boards
- that do have such a tie should set CFG_NS16550_CLK to be
- get_bus_freq(0) -- which most of them do already.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit 24ef76f320fbadf074105229826514db140f939f
- Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
- Date: Wed Jul 2 07:03:53 2008 -0700
- Change the temp map to ROM to align addresses to page size.
- With a page size of BOOKE_PAGESZ_16M, both the real and effective
- addresses must be multiples of 16MB. The hardware silently truncates
- them so the code happens to work. This patch clarifies the situation
- by establishing addresses that the hardware doesn't need to truncate.
- Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 06b4186c10204b6683edb047ac5f506fb0ce0937
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jun 17 17:45:22 2008 -0500
- mpc85xx: use IS_E_PROCESSOR macro
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Jun 16 15:55:53 2008 -0500
- fdt: add crypto node handling for MPC8{3, 5}xxE processors
- Delete the crypto node if not on an E-processor. If on 8360 or 834x family,
- check rev and up-rev crypto node (to SEC rev. 2.4 property values)
- if on an 'EA' processor, e.g. MPC8349EA.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Fri Jul 11 15:10:11 2008 -0400
- ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
- ARM DaVinci: Remove extern phy_t declaration by moving
- code to proper place.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Fri Jul 11 15:10:10 2008 -0400
- ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
- ARM DaVinci: Remove duplicate definitions of MACH_TYPE
- and prototype of i2c_init().
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jul 14 14:03:02 2008 -0500
- Fix some more printf() format problems.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 45b16d22c64674ccd8c4637456a987463609141c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 22:38:42 2008 +0200
- Fix coding style; make code better parsable by external tools
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b880cbf207b1c109d3a661417a8feddcbd729a9d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 21:19:08 2008 +0200
- cpu/i386/serial.c: Fix syntax errors
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 20:41:35 2008 +0200
- elppc board: Coding style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 20:40:22 2008 +0200
- elppc board: fix syntax error.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 20:38:26 2008 +0200
- EB+MCF-EV123 board: fix coding style (alingment)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6841785a0bb0f38175456a923edd634fb7dd6947
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 20:36:44 2008 +0200
- EB+MCF-EV123 board: fix syntx error
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jul 7 18:02:08 2008 -0500
- Remove LBC_CACHE_BASE from 8544 DS
- The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping
- space for some anyway, we were allowing speculative loads into unmapped space,
- which would cause an exception (annoying, even if ultimately harmless).
- Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
- problem.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 15:19:07 2008 +0200
- Code cleanup: fix old style assignment ambiguities like "=-" etc.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d7854223c5c85b5849fbf422cc8ac0efef461c37
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 15:10:53 2008 +0200
- AmigaOneG3SE: remove dead and incomplete files
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b64f190b7a34224df09b559ca111eb1b733f00ad
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 14 15:06:35 2008 +0200
- Fix printf() format issues with sizeof_t types by using %zu
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f354b73e16a86f9e9085471a830605f74f84ea5d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Jul 14 14:11:45 2008 +0200
- vsprintf: add z and t options
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jul 13 23:07:35 2008 +0200
- Fix some more printf() format issues.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d5996dd555edf52721b7691a4c59de016251ed39
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jul 13 19:51:00 2008 +0200
- Fix some more printf() format problems.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0f9d5f6d6e814907794995c6a22af752040c35d9
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jul 13 19:48:26 2008 +0200
- ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Sat Jul 12 17:31:36 2008 +0200
- Fix bug in Lime video driver
- We need to wait while drawing engine clears frame
- buffer before any further software accesses to frame
- buffer will be initiated. Otherwise software drawn
- parts could be partially destroyed by the drawing
- engine or even GDC chip freeze could occur (as
- observed on socrates board).
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Jul 12 14:36:34 2008 +0200
- Fix some more printf() format issues.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 18c8a28aad49803780bd8d52432ded528e37e701
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 11 15:11:57 2008 +0200
- hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 11 11:50:53 2008 +0200
- hwmon: Cleaning hwmon devices
- Clean Makefile
- Move device specific values to driver for better reading
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- Acked-by: Stefan Roese <sr@denx.de>
- commit c78fce699c7ff467ecd841da6a79f065180bf578
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 11 10:43:13 2008 +0200
- FIS: repare incorrect return value with ramdisk handling
- Microblaze and PowerPC use boot_get_ramdisk for loading
- ramdisk to memory with checking return value.
- Return 0 means success. Return 1 means failed.
- Here is correspond part of code from bootm.c which check
- return code.
- ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
- &rd_data_start, &rd_data_end);
- if (ret)
- goto error;
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 11 10:10:32 2008 +0200
- microblaze: Remove useless ancient headers
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 53ea981c3124b13c137c2d10e975b7c6672266e0
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 11 10:10:31 2008 +0200
- microblaze: Clean uartlite driver
- Redesign uartlite driver to in_be32 and out_be32 macros
- Fix missing header in io.h
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit dbf3dfb386a2d5d2381814e39985ab2e21894550
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Fri Jul 11 02:39:14 2008 +0200
- Enable passing of ATAGs required by latest Linux kernel.
- commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Fri Jul 11 10:24:15 2008 -0400
- Fix integer overflow warning in calc_divisor()
- which happened when rounding the serial port clock divisor
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit 6b760189d77f001684e3160b355c185ca3804961
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Fri Jul 11 01:09:59 2008 +0200
- Fix build time warnings in function mmc_decode_csd()
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit c15947d6ce0d59925c97fdfac692476af6e262d0
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Thu Jul 10 10:46:33 2008 -0400
- ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
- caused by missing dcache status/enable/disable functions.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 13:53:31 2008 +0200
- ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
- This patch removes some ft_board_setup() functions from some 4xx boards.
- This can be done since we now have a default weak implementation for this
- in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
- implementation like canyonlands need their own version.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jul 13 14:58:16 2008 +0200
- Add last known maintainer for orphaned boards; reformat.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu Jul 10 13:16:04 2008 +0200
- Remove kharris@nexus-tech.net from MAINTAINERS
- Mail to kharris@nexus-tech.net bounces because the user doesn't exist
- anymore. You can't be a maintainer without a valid e-mail address, so
- move all boards that used to be maintained by Kyle Harris to the
- "orphaned" list.
- Currently, only PowerPC has a list of orphaned boards, so this patch
- creates one for ARM as well.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 17bd17071463b0cde391ac4a0863d600474b4ea1
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Jul 10 01:15:10 2008 +0200
- at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
- On the at91sam9260ep development board there is an EEPROM
- connected to the TWI interface (PA23, PA24 Peripheral A
- multiplexing), so we cannot use these pins as ETX2, ETX3.
- This patch configures PA10, PA11 pins for ETX2, ETX3
- instead of PA23, PA24 pins.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
- commit f889265753ddf4465d9d580827bb9289bfac55d6
- Author: Kenneth Johansson <kenneth@southpole.se>
- Date: Sat Jul 12 13:18:34 2008 -0600
- fix DIU for small screens
- The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
- so it was not possible to set a slow pixel clock and thus prevented
- display on small screens.
- Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit b60b8573875e650e4c69be667bfc88d3ed474a7c
- Author: John Rigby <jrigby@freescale.com>
- Date: Fri Jul 11 14:44:09 2008 -0600
- ADS5121 cleanup compile warnings
- board/ads5121/iopin.c
- Replace bit fields in struct iopin_t with a single
- field and intialize it via plain old macros.
- This fixes the type pun warnings and makes the code
- more readable.
- board/ads5121/ads5121.c
- Add include iopin.h to ads5121.c for the iopin_initialize
- prototype.
- Add an extern void ads5121_diu_init(void)
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit bde63587622c4b830a27d1ddf7265843de9e994f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jul 11 22:56:11 2008 +0200
- Fix some more printf() format issues.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jul 11 22:55:31 2008 +0200
- Fixed some out-of-tree build issues
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 9 16:20:23 2008 -0500
- ColdFire: Fix FB CS not setup properly for Mcf5282
- Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
- CFG_CSn_RO is defined as 0, the chipselect will not
- be assigned.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 9 15:47:27 2008 -0500
- ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
- Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
- clock module in cpu/<cf arch>/cpu_init.c
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit f94945b517f10e01927101679c62361e03d4e837
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 9 15:25:01 2008 -0500
- ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 9 15:21:44 2008 -0500
- Fix compile error caused by missing timer function
- Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit c37ea031175b807c54e6bad9b270e9bede6c0078
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jul 9 15:14:25 2008 -0500
- Fix compile error caused by incorrect function return type
- Rename int mii_init(void) to void mii_init(void)
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 18 19:27:23 2008 -0500
- ColdFire: Fix power up issue for MCF5235
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 18 19:19:07 2008 -0500
- ColdFire: Fix compiling error for MCF5275
- The compiling error was caused by missing a closed parentheses
- in speed.c
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 18 19:14:01 2008 -0500
- ColdFire: Fix timer issue for MCF5272
- The timer was assigned to wrong timer memory mapped which
- caused udelay() and timer() not working properly.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 18 19:12:13 2008 -0500
- ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
- Signed-off-by: Kurt Mahan <kmahan@freescale.com>
- commit 8371dc2066136be21e10b7b9293e469297d77298
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 18 19:05:23 2008 -0500
- ColdFire: Add -got=single param for new linux v4e toolchains
- Signed-off-by: Kurt Mahan <kmahan@freescale.com>
- commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jun 18 13:21:19 2008 -0500
- ColdFire: Fix code flash configuration for M547x/M548x boards
- Signed-off-by: Kurt Mahan <kmahan@freescale.com>
- commit 6e37091afc07fdcc15590093fd066b0cb7399f85
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jun 24 12:12:16 2008 -0500
- ColdFire: Fix warning messages by passing correct data type in board.c
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 81cc32322acb1b3225ee45606ced48e2a14824dc
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu May 29 12:21:54 2008 -0500
- ColdFire: Fix UART baudrate formula
- The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
- can generate the wrong divisor due to integer division truncation.
- Round the calculated divisor value by adding 1/2 the baudrate
- before dividing by the baudrate.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit b578fb471444cbd7db1285701ba51343baaf73fb
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 11:38:26 2008 +0200
- ppc4xx: Fix include sequence in 4xx_pcie.c
- This patch now moves common.h to the top of the inlcude list. This
- is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
- the phys_size_t/phys_addr_t are defined to the correct size in this
- driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 69e2c6d0d13d7c8cf1612ac090bdc4c59ba6858e
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 11 13:10:56 2008 +0200
- ppc4xx: Fix compile warning in 44x_spd_ddr2.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6bd9138498c2e4f4f09190108b99157d1b2140b5
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 11 11:40:13 2008 +0200
- ppc4xx: Fix small korat merge problem
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1d0554736a0a1dd59718acda660871ce56b69e18
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 11 11:34:52 2008 +0200
- ppc4xx: Some Rewood cleanups (coding style, leading white spaces)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3a82113ed5934d498f25080441a8261fc9454b15
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 16:37:09 2008 +0200
- ppc4xx: Add 460SX UIC defines
- Only the really needed ones are added (cascading and EMAC/MAL).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 26173fc6f60521c2a8072f652f863617fc11ba9a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 30 14:11:07 2008 +0200
- ppc4xx: Continue cleanup of ppc440.h
- This patch continues the ppc440.h cleanup by removing some of the unused
- defines.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d9056b7913ed6a228d2f33671d916efedee541dd
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 30 14:05:05 2008 +0200
- ppc4xx: Cleanup Katmai & Yucca PCIe register usage
- This patch cleans up the 440SPe PCIe register usage. Now only defines
- from the include/asm-ppc/4xx_pcie.h are used.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5de851403b01489b493fa83137ad990b8ce60d1c
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jun 26 17:36:39 2008 +0200
- ppc4xx: Rework 440GX UIC handling
- This patch reworks the 440GX interrupt handling so that the common 4xx
- code can be used. The 440GX is an exception to all other 4xx variants
- by having the cascading interrupt vectors not on UIC0 but on a special
- UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references
- the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt
- handling is simpler without any 440GX special cases.
- Also some additional cleanup to cpu/ppc4xx/interrupt.c is done.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d1631fe1a05b063ccaf62ea892a8887b829847d1
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jun 26 13:40:57 2008 +0200
- ppc4xx: Consolidate PPC4xx UIC defines
- This 2nd patch now removes all UIC mask bit definition. They should be
- generated from the vectors by using the UIC_MASK() macro from now on.
- This way only the vectors need to get defined for new PPC's.
- Also only the really used interrupt vectors are now defined. This makes
- definitions for new PPC versions easier and less error prone.
- Another part of this patch is that the 4xx emac driver got a little
- cleanup, since now the usage of the interrupts is clearer.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4fb25a3db3b3839094aa9ab748efd7a95924690b
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jun 25 10:59:22 2008 +0200
- ppc4xx: Consolidate PPC4xx UIC defines
- This patch is the first step to consolidate the UIC related defines in the
- 4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to
- asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next
- steps.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7ee2619c20ccecd57966d74d844e6329e141261c
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jun 24 17:18:50 2008 +0200
- ppc4xx: Consolidate PPC4xx EBC defines
- This patch removes all EBC related defines from the PPC4xx headers
- ppc405.h and ppc440.h and introduces a new header
- include/asm-ppc/ppc4xx-ebc.h
- with all those defines.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e321801bed5a6d896d298c00fd20046f039d5d66
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 13:52:44 2008 +0200
- ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
- This patch removes some ft_board_setup() functions from some 4xx boards.
- This can be done since we now have a default weak implementation for this
- in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
- implementation like canyonlands need their own version.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 08250eb2edbd96514d049602d9e134110ac3185f
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 15:32:32 2008 +0200
- ppc4xx: Fix merge problems in 44x_spd_ddr2.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1740c1bf40e3c6d03ac16c29943fdd9fc1e87038
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Tue Jul 8 08:35:00 2008 -0700
- ppc4xx: Add MII mode support to the EMAC RGMII Bridge
- This patch adds support for placing the RGMII bridge on the
- PPC405EX(r) into MII/GMII mode and allows a board-specific
- configuration to specify the bridge mode at compile-time.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2e2050842e731c823ce8d41fb0c15579eb70ced9
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Wed Jul 9 16:46:35 2008 -0700
- ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller
- This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM
- controller registers (MODT and INITPLR) used by the
- PowerPC405EX(r). The MMODE and MEMODE registers are unified with their
- peer values used for the INITPLR MR and EMR registers,
- respectively. Finally, a spelling typo is correct (MANUEL to MANUAL).
- With these mnemonics in place, the CFG_SDRAM0_* magic numbers for
- Kilauea are replaced by equivalent mnemonics to make it easier to
- compare and contrast other 405EX(r)-based boards (e.g. during board
- bring-up).
- Finally, unified the SDRAM controller register dump routine such that
- it can be used across all processor variants that utilize the IBM DDR2
- SDRAM controller core. It produces output of the form:
- PPC4xx IBM DDR2 Register Dump:
- ...
- SDRAM_MB0CF[40] = 0x00006701
- ...
- which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included
- since it is not uncommon that the DCR values in header files get mixed
- up and it helps to validate, at a glance, they match what is printed
- in the user manual.
- Tested on:
- AMCC Kilauea/Haleakala:
- - NFS Linux Boot: PASSED
- - NAND Linux Boot: PASSED
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ad7382d828982e9c1bafc4313ef1b666f6145f58
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Wed Jul 9 16:31:59 2008 -0700
- ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics
- Add additional DDR2 SDRAM memory controller DCR mneomnics, condition
- revision ID DCR based on 405EX, and add field mnemonics for bus error
- status and ECC error status registers.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 103201731bd8e85404d0f51a5b4e8abd14c0b6c6
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Wed Jul 9 16:31:36 2008 -0700
- ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r)
- This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5b457d00730d4aa0c6450d21a9104723e606fb98
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Wed Jul 9 11:55:46 2008 -0700
- PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)
- While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM
- controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in
- the 405EX(r), SDRAM_MCSTAT has a different DCR value.
- Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF
- which causes SDRAM initialization to periodically fail since it can
- prematurely indicate SDRAM ready status.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d
- Author: Feng Kan <fkan@amcc.com>
- Date: Tue Jul 8 22:48:42 2008 -0700
- ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.
- Add AMCC Redwood reference board that uses the latest
- PPC 464 CPU processor combined with a rich mix of peripheral
- controllers. The board will support PCIe, mutiple Gig ethernet
- ports, advanced hardware RAID assistance and IEEE 1588.
- Signed-off-by: Feng Kan <fkan@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 96e5fc0e6a1861d0fea4efa3cd376df95a5b1b89
- Author: Feng Kan <fkan@amcc.com>
- Date: Tue Jul 8 22:48:07 2008 -0700
- ppc4xx: Add initial 460SX reference board (redwood) config file and defines.
- Signed-off-by: Feng Kan <fkan@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7d30793685efcada183891c78fc892e6c9ba50c7
- Author: Feng Kan <fkan@amcc.com>
- Date: Tue Jul 8 22:47:31 2008 -0700
- ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory.
- Signed-off-by: Feng Kan <fkan@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jul 11 01:16:00 2008 +0200
- Fix some more print() format errors.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit fdd70d1921b87287d9a99d1be99bc35226c2b412
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Jul 10 20:57:54 2008 +0200
- MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
- Author: Sergey Lapin <slapin@ossfans.org>
- Date: Thu Jun 5 11:06:29 2008 +0400
- DataFlash AT45DB021 support
- Some boards based on AT91SAM926X-EK use smaller DF chips to keep
- bootstrap, u-boot and its environment, using NAND or other external
- storage for kernel and rootfs. This patch adds support for
- small 1024x263 chip.
- Signed-off-by: Sergey Lapin <slapin@ossfans.org>
- commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Jul 10 14:00:15 2008 -0500
- silence misc printf formatting compiler warnings
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Thu Jul 10 14:47:09 2008 +0200
- USB: shutdown USB before booting
- This patch fixes a potentially serious issue related to USB which was
- discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
- ARM920T. Martin wrote:
- Turn off USB to prevent the host controller from writing to the
- SDRAM while Linux is booting. This could happen, because the HCCA
- (Host Controller Communication Area) lies within the SDRAM and the
- host controller writes continously to this area (as busmaster!), for
- example to increase the HccaFrameNumber variable, which happens
- every 1 ms.
- This is a slightly modified version of the patch in order to shutdown
- USB when booting on all architectures.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
- Author: Martha Marx <mmarx@silicontkx.com>
- Date: Thu May 29 14:23:25 2008 -0400
- Configuration changes for ADS5121 Rev 3
- ADS5121 Rev 3 board is now the default config
- config targets are now
- ads5121_config
- Rev 3 board with
- PCI
- M41T62 on board RTC
- 512MB DRAM
- ads5121_rev2_config
- Rev 2 board with
- No PCI
- 256MB DRAM
- Signed-off-by: Martha Marx <mmarx@silicontkx.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
- Author: Martha Marx <mmarx@silicontkx.com>
- Date: Thu May 29 15:37:21 2008 -0400
- Consolidate ADS5121 IO Pin configuration
- Consolidate ADS5121 IO Pin configuration to one file
- board/ads5121/iopin.c.
- Remove pin config from cpu/mpc512x/fec.c
- Signed-off-by: Martha Marx <mmarx@silicontkx.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
- Author: Christian Eggers <christian@p2400.wgnetz.xx>
- Date: Fri Jun 27 19:46:51 2008 +0200
- Fix "usb part" command
- Only print partition for selected device if user supplied the <dev>
- arg with the "usb part [dev]" command.
- Signed-off-by: Christian Eggers <ceggers@gmx.de>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit cc83b27217f7380041fea386ddb6d6d9b261617d
- Author: Harald Welte <laforge@gnumonks.org>
- Date: Mon Jul 7 00:58:05 2008 +0800
- fix USB devices with multiple configurations
- This patch fixes bugs in usbdcore*.c related to the use of devices
- with multiple configurations.
- The original code made mistakes about the meaning of configuration value and
- configuration index, and the resulting off-by-one errors resulted in:
- * SET_CONFIGURATION always selected the first configuration, no matter what
- wValue is being passed.
- * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
- configuration (index 0).
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit 06c53beae1a726e707971c555613f09b270a2461
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 10 13:16:09 2008 +0200
- Fix some more print() format errors.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
- Author: Christian Eggers <christian@p2400.wgnetz.xx>
- Date: Fri Jun 27 19:46:51 2008 +0200
- Fix "usb part" command
- Only print partition for selected device if user supplied the <dev>
- arg with the "usb part [dev]" command.
- Signed-off-by: Christian Eggers <ceggers@gmx.de>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
- Author: Harald Welte <laforge@gnumonks.org>
- Date: Mon Jul 7 00:58:05 2008 +0800
- fix USB devices with multiple configurations
- This patch fixes bugs in usbdcore*.c related to the use of devices
- with multiple configurations.
- The original code made mistakes about the meaning of configuration value and
- configuration index, and the resulting off-by-one errors resulted in:
- * SET_CONFIGURATION always selected the first configuration, no matter what
- wValue is being passed.
- * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
- configuration (index 0).
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit e870690bdca154943ecadd5212d2d59c1b9d391b
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 10:10:54 2008 +0200
- MTD/NAND: Fix printf format warning in nand code
- This patch fixes NAND related printf format warning. Those warnings are
- now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
- [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
- really helpful.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 10:00:45 2008 +0200
- rtc: Fix printf format warning in m41t60.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jul 8 12:01:47 2008 +0200
- pci: Move PCI device configuration check into a separate weak function
- This patch moves the check, if a device should be skipped in PCI PNP
- configuration into the function pci_skip_dev(). This function is defined
- as weak so that it can be overwritten by a platform specific one if
- needed. The check if the device should get printed in the PCI summary upon
- bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
- pci_print_dev() which is also defined as weak too.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b002144e1dc21374b1ef5281fe6b5d014af96650
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 10 09:58:06 2008 +0200
- ppc4xx: Fix printf format warnings now visible with the updated format check
- This patch fixes ppc4xx related printf format warning. Those warnings are
- now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
- [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
- really helpful.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jul 9 17:33:57 2008 +0200
- ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
- Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
- To support such configurations, we "only" map the first 2GB via the TLB's. We
- need some free virtual address space for the remaining peripherals like, SoC
- devices, FLASH etc.
- Note that ECC is currently not supported on configurations with more than 2GB
- SDRAM. This is because we only map the first 2GB on such systems, and therefore
- the ECC parity byte of the remaining area can't be written.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cf1c2ed91df26903b956948f37f82de9e1158a89
- Author: Larry Johnson <lrj@acm.org>
- Date: Sat Jun 14 17:02:49 2008 -0400
- ppc4xx: Remove implementation of testdram() from Korat board support
- Signed-off-by: Larry Johnson <lrj@acm.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
- Author: Larry Johnson <lrj@acm.org>
- Date: Sat Jun 14 16:53:02 2008 -0400
- ppc4xx: Update and add FDT to Korat board support
- Signed-off-by: Larry Johnson <lrj@acm.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4188f0491886b3b486164e819c0a83fdb97efd7d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 10 01:13:30 2008 +0200
- Minor coding style cleanup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8915f1189c1d29d8be7f4de325702d90a8988219
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Wed Jul 9 17:50:45 2008 -0400
- e1000: add support for 82545GM 64bit PCI-X copper variant
- This PCI-X e1000 variant works by just adding in the correct
- PCI IDs in the appropriate places.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit 21ae6ca0315afdbc65dc3e95ffd5763e6773d030
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Jul 9 12:34:11 2008 +0000
- SPARC: Build error fix
- (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)
- This patch makes SPARC targets build again. It is caused by
- phys_addr_t and phys_size_t being defined in the wrong header
- file. include/lmb.h need those typedefs to build.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 11ccc33fa21acce108f6b4a6936e3271af904c64
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Wed Jul 9 08:17:15 2008 +0200
- Many spelling fixes in README.
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit dbab0691d2533560f7e91b92ae844046a9ad1df3
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Wed Jul 9 08:17:06 2008 +0200
- Minor spelling fix in comment.
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit 89134ea1f67208fd3160bdbb0b9eaab4eab98484
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Tue Jul 8 14:54:58 2008 -0400
- Round the serial port clock divisor value returned by calc_divisor()
- Round the serial port clock divisor value returned by
- calc_divisor().
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Signed-off-by: John Roberts <john.roberts@pwav.com>
- commit 9d2e3947b2944e5bb85b4335533f8c93c58445fe
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Jul 9 17:47:52 2008 -0500
- NAND: ifdef-protect most of nand.h when using legacy NAND.
- Some macros such as NAND_CTL_SETALE conflict between current and legacy
- NAND, being defined by the subsystem in the former case and the board
- config file in the latter.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Tue Jul 8 11:02:05 2008 -0400
- ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)
- ARM: Fix for incorrect version of patch applied when
- adding support for the Lyrtech SFF-SDR board.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
- commit 47042b363ee5022b8180c65d3f4558e7972c79cd
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Tue Jul 8 09:08:40 2008 +0900
- Remove useless print message at apollon
- Remove useless print message at apollon
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 98874ff329d4a5b32c467b43f6e966e1aa68479f
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jul 7 14:24:39 2008 -0500
- Fix LMB type issues
- The LMB code now uses phys_addr_t and phys_size_t. Also, there were a couple
- of casting problems in the bootm code that called the LMB functions.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit da8693a91b8eef75ade8de50a1b2ce035bc5fb54
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jul 7 09:39:06 2008 -0500
- Fix compiler warnings
- gcc-4.3.x generates the following:
- bootm.c: In function 'do_bootm_linux':
- bootm.c:208: warning: cast from pointer to integer of different size
- bootm.c:215: warning: cast from pointer to integer of different size
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5bb12dbd7ae03189b6c13d8737b5a1b37c3df698
- Author: Harald Welte <laforge@gnumonks.org>
- Date: Mon Jul 7 15:40:39 2008 +0800
- Remove code duplication for setting the default environment
- common/env_common.c (default_env): new function that resets the environment to
- the default value
- common/env_common.c (env_relocate): use default_env instead of own copy
- common/env_nand.c (env_relocate_spec): use default_env instead of own copy
- include/environment.h: added default_env prototype
- Signed-off-by: Werner Almesberger <werner@openmoko.org>
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit 99c2b434d37863df5dda5207a53760c6506fc2be
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Sun Jun 22 16:13:46 2008 +0200
- NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.
- The writeenv() and readenv() calls introduced by the recently added bad block
- management for environment variables were missing casts therefore producing
- compile time warnings.
- While at it fixing some typo in a comment and indentation.
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 3167c5386ea1c98b638be5d8763ef6d5938ef1bd
- Author: Scott Wood <scottwood@freescale.com>
- Date: Fri Jun 20 12:38:57 2008 -0500
- NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.
- This is particularly problematic now that non-NAND-specific code is
- including <nand.h>, and thus all debugging code is being compiled
- regardless of whether it was requested, as reported by Scott McNutt
- <smcnutt@psyent.com>.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit c3bf1ad7baa1b0dd989dedc260b7098b6089ae05
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu Jun 12 19:27:58 2008 +0200
- mmc: Move atmel_mci driver into drivers/mmc
- This makes it easier to use the driver on other platforms.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d2d54ea449639f3d1a6007e333ab9fcc609a18f0
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu Jun 12 19:27:57 2008 +0200
- avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver
- After we move the atmel_mci driver into drivers/mmc, we can't select
- it with CONFIG_MMC anymore. Introduce a new symbol specifically for
- this driver so that there's no ambiguity.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 5ce13051a48c62bda9723df3b4778c492fb47f36
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu Jun 12 19:27:56 2008 +0200
- Create drivers/mmc subdirectory
- In order to consolidate more of the various MMC drivers around the
- tree, we must first have a common place to put them.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit b502611b51f02718c2d1117d4981dabceb5af6de
- Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
- Date: Sun Jul 6 12:30:09 2008 +0200
- Change env_get_char from a global function ptr to a function
- This avoids an early global data reference.
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- commit 27269417ade432189b234d9fbac98b54e37b978c
- Author: Matvejchikov Ilya <matvejchikov@gmail.com>
- Date: Sun Jul 6 13:57:58 2008 +0400
- Some copy-n-paste fixes in printf usage
- Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
- commit 0e6989b9faf1588e8723535539e88a0df3c71356
- Author: Matvejchikov Ilya <matvejchikov@gmail.com>
- Date: Sun Jul 6 13:57:00 2008 +0400
- FDT memory and pci node fixes for MPC8260ADS
- Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
- commit dc4b0b38d4aadf08826f6c31270f1eecd27964fd
- Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
- Date: Mon Jul 7 06:41:14 2008 -0700
- Fix printf errors.
- The compiler will help find mismatches between printf formats and
- arguments if you let it. This patch adds the necessary attributes to
- declarations in include/common.h, then begins to correct the resulting
- compiler warnings. Some of these were bugs, e.g., "$d" instead of
- "%d" and incorrect arguments. Others were just annoying, like
- int-long mismatches on a system where both are 32 bits. It's worth
- fixing the annoying errors to catch the real ones.
- Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
- commit 417faf285b2527acb2de24c5cd3e2621d385408c
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jul 9 11:09:41 2008 -0500
- Allow print_size to print in GB
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit e7c374529c87525c9aa463e0557c287887ae4e9e
- Author: Jason McMullan <mcmullan@netapp.com>
- Date: Sun Jun 8 23:56:00 2008 -0400
- mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment
- Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
- they are set in the U-Boot environment.
- Signed-off-by: Jason McMullan <mcmullan@netapp.com>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 0192d7d56e9320819dea262f49789ae18fdd2c72
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jul 8 12:57:14 2008 +0200
- jedec_flash: Fix AM29DL800BB device ID
- As pointed out by Jerry Hicks, this patch corrects the device ID of
- the Spansion AM29DL800BB NOR device. Verified against latest Spansion
- datasheet (rev C4 from Dezember 2006).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 689c1b30caacba3fbca0b1813facb3ab70b6cd63
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Mon Jul 7 11:22:37 2008 +0900
- sh: Fix compile error sh7763rdp board
- Disable SH ether driver.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 9e23fe0560b84e324dc5f0ff8813dab2aa34f074
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jul 8 12:03:24 2008 +0900
- sh: Fix SH-boards compile error
- By Cleanup out-or-tree building for some boards (.depend)
- (commit:c8a3b109f07f02342d097b30908965f7261d9f15)
- because filse ware changed, some SH-boards have compile error.
- I revised this problem.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Tue May 13 11:50:36 2008 +0800
- Feed the watchdog in u-boot for 8610 board.
- The watchdog on 8610 board is enabled by setting sw[6]
- to on. Once enabled, the watchdog can not be disabled
- by software. So feed the dog in u-boot is necessary for
- normal operation.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Wed Jun 18 12:10:33 2008 -0400
- Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
- Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
- Remove duplicate code in a if/else block in
- cpu/arm926ejs/davinci/lxt972.c.
- Fixed style issues.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit fec61431a003f5778bafa2624073a571af8bec9f
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Wed Jun 18 12:10:31 2008 -0400
- Remove duplicate definitions in include/lxt971a.h.
- Remove duplicate definitions in include/lxt971a.h.
- Remove duplicate registers and bits definitions in
- include/lxt971a.h for standard MII registers, and
- use values in include/miiphy.h instead.
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 9751ee0990f467941da0b095a4e995f863672d7a
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Wed Jun 11 21:05:00 2008 +0900
- net: sh: Renesas SH7763 Ethernet device support
- Renesas SH7763 has 2 channel Ethernet device.
- This is 10/100/1000 Base support.
- But this patch check 10/100 Base only.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 873d97aabc0b1c8822ed1d87e8c5c8ae0a7e4ae9
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:28:05 2008 +0900
- sh: Update Renesas R2DPlus board
- New NOR Flash board support and remove old type flash board config.
- And Remove network setting from config file.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit ec39d479d2003f15e86e23ebc4e02a1c9a3a181c
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:28:01 2008 +0900
- sh: Update Renesas R7780MP board
- New NOR Flash board support and remove network setting from config file.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit c001cd604e9f133743effbddb1c215b48e761c5a
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:56 2008 +0900
- sh: Update Renesas Migo-R board
- Remove network setting from config file.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit f9599eca7cb5ebe40e5305c8006dced6ecc5cd9e
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:52 2008 +0900
- sh: Update Hitachi MS7722SE board
- Remove network setting from config file.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 26209e48e8791670c93108029a5c31a30016c6df
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:48 2008 +0900
- sh: Cleanup source code of SH7763RDP
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 5cd5b2c96ef0025762931349d350287aec03ab47
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:44 2008 +0900
- sh: Cleanup source code of R2DPlus
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 4ec7e915cfaa31b392755dd2c8231e64736d2ea8
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:41 2008 +0900
- sh: Cleanup source code of R7780MP
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 0955ef34c0454ae2ee59a78657a0f01fb3ef16d6
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:38 2008 +0900
- sh: Cleanup source code of MS7722SE
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 1d7b31d97b34ccb6f9b20a2465864998b0bf2691
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Tue Jun 17 16:27:34 2008 +0900
- sh: Cleanup source code of MS7720SE
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 3ab4827cbe409488ebea1a2ee5094783f2672214
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Jul 7 00:45:03 2008 +0200
- SH: fix out of tree building
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 9047bfa1e737d787be460387dd6f45737eeceb10
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Thu Jul 3 23:16:06 2008 +0900
- net: smc911x: Fix typo
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- commit 5ed546fdd0ca46a165661c2009fa743d9c9fceca
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Wed Jul 2 18:54:08 2008 +0200
- update mvBL-M7 board config
- update mvBL-M7 config file to use UBOOT_VERSION and define
- CONFIG_HIGH_BATS.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- commit 5cacc5d0ec52678a5eb83ecda5c3bcb22eb47f30
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Mon Jun 30 17:45:01 2008 +0900
- net: fix compile problem in smc911x driver.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Acked-by: Ben Warren <biggerbadderben@gmail.com>
- commit 9fea65a6c469b1b474b27446feb58738baba2d31
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue Jun 24 09:54:09 2008 +0200
- ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405
- This change helps with better handling with others
- Xilinx based platform.
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- Acked-by: Stefan Roese <sr@denx.de>
- commit cbb6289569ae4fc6e2d676528e46ffcc72d743d0
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jun 17 13:07:11 2008 +0900
- net: ne2000: Move dev_addr variable from grobal to local.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit dd7e5fa5f847188f78f62f2c52de6cb3def3ecdb
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jun 17 13:07:15 2008 +0900
- net: ne2000: Fix compile error of NE2000
- If enable DEBUG, can not compile ne2000 driver.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit dd35479a50f6c7c31ea491c07c5200c6dfd06a24
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Mon Jun 23 22:57:27 2008 -0700
- Add mechanisms for CPU and board-specific Ethernet initialization
- This patch is the first step in cleaning up net/eth.c, by moving Ethernet
- initialization to CPU or board-specific code. Initial implementation is
- only on the Freescale TSEC controller, but others will be added soon.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 7754f2be5d1835d263aad21b5a629526f3e680b0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jul 6 01:21:46 2008 +0200
- include/sha256.h: fix file permissions.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d3bcdf838e2991d58571308fa6e04ca335bc06e8
- Author: Patrice Vilchez <patrice.vilchez@atmel.com>
- Date: Tue May 27 11:15:29 2008 +0200
- [AT91SAM9] Fix NAND FLASH timings
- Fix NAND FLASH timings for at91sam9x evaluation kits.
- New timings are based on application note
- "NAND Flash Support on AT91SAM9 Microcontrollers" available at
- http://atmel.com/dyn/resources/prod_documents/doc6255.pdf
- Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Acked-by: Stelian Pop <stelian@popies.net>
- commit 19bd688484322fe62d1a66c8299da6ff9e967ff9
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 22 00:15:40 2008 +0200
- Fix boot from NOR due to incorrect reset delay.
- AT91 RSTC registers are battery-backuped, so their values
- are not reset across power cycles. One of those registers,
- the AT91_RSTC_MR register, is being modified by U-Boot, in
- the ethernet initialisation routine, to generate a 500ms
- user reset.
- Unfortunately, this value is not being restored afterwards,
- causing subsequent resets to also last for 500ms.
- This long reset sequence causes problems (at least) in the
- boot sequence from NOR: by the time the CPU tries to load
- a program from the NOR flash, the latter is still in reset
- and not yet available.
- Additionaly, this patch fixes a bug in the original code which
- caused the reset delay to last for 2s instead of 500ms.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f492dd636fbbae529e17533995bc6e5813c007f6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jul 4 20:11:49 2008 +0200
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jul 4 20:07:35 2008 +0200
- CCM/SCM boards: fix out of tree building
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ab4c3a490df9a964711556d2a05b0c787db45fde
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 3 23:22:27 2008 +0200
- SCM board: fix build errors.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a566466f17ba0e2d2b6c250e77da678fb932470d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 3 23:06:36 2008 +0200
- IAD210 board: fix ``"ALIGN" redefined'' warning.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ad756314797c16fa5dca23e115aab881011f164f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 3 23:00:24 2008 +0200
- CCM board: fix build errors.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f16ed51702cb9fb6fa2e019bbc0fcd1466b57c3b
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Wed Jul 2 18:54:08 2008 +0200
- update mvBL-M7 board config
- update mvBL-M7 config file to use UBOOT_VERSION.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ced209c50e80c25f13c083099b05044048d21f4f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 3 22:39:21 2008 +0200
- sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4ff170a8180a79da4cdaab1b30d58cd7b6be565e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 3 22:34:08 2008 +0200
- Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 730f298485984b011b6ee8f4acb511cb45a843dd
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 3 22:04:17 2008 +0200
- lmb: fix "implicit declaration of function 'lmb_free'" warning
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 322ef5e28d2dc62571afc699b00add22a8e006e4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 2 23:53:23 2008 +0200
- Cleanup: remove redundant deleting on *~ files
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c8a3b109f07f02342d097b30908965f7261d9f15
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 2 23:49:18 2008 +0200
- Cleanup out-or-tree building for some boards (.depend)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a30cc5a340e7f8f5f85a0e08e7f6c4106ce117c4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 2 23:38:50 2008 +0200
- Cleanup: fix out-of-tree building for some boards
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 461fa68d20861811487944d22291db5a13410e20
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 2 23:00:14 2008 +0200
- Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5981ebd32017e062b08aa6747cf591276f2db779
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Jun 20 22:26:24 2008 +0200
- fdt: Fix typo in variable name.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit a7a5982cd0f3482f88225af4da7795bc4f6cb9bc
- Author: Gary Jennejohn <garyj@denx.de>
- Date: Thu Jun 19 11:11:19 2008 +0200
- Add logos for RRvision board
- Signed-off-by: Gary Jennejohn <garyj@denx.de>
- commit ee4ae38342142237ca85913f88ee570c1eb5ca7c
- Author: Esben Haabendal <EsbenHaabendal@gmail.com>
- Date: Wed Jun 18 11:03:57 2008 +0200
- mpc8260: add fdt_fixup_ethernet support
- Add support for updating mac-address and local-mac-address in fdt for
- all MPC8260 targets.
- Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>
- commit f6a69559d64498a04e1e0b087a9b920e5775f866
- Author: Steven A. Falco <sfalco@harris.com>
- Date: Thu Jun 12 13:24:42 2008 -0400
- cmd_nvedit.c: clean up syntax highlighting
- My text-editor (vim) has a bit of trouble syntax-highlighting the
- cmd_nvedit.c file, because it apparently does not parse C
- ifdef/else/endif. The following patch does not change the behavior of
- the code at all, but does allow the editor to properly
- syntax-highlight the file.
- Signed-off-by: Steve Falco <sfalco@harris.com>
- commit 75678c807a6272ecc5541eb32898c93887f08400
- Author: Steven A. Falco <sfalco@harris.com>
- Date: Thu Jun 12 13:22:12 2008 -0400
- Make setenv() return status
- Currently, the setenv function does not return an error code.
- This patch allows to test for errors.
- Signed-off-by: Steve Falco <sfalco@harris.com>
- commit 4928e97c8531283ca9b368b7c29a8a12e726562a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jun 11 10:14:06 2008 -0500
- PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops
- fls64, __ilog2_u64, ffs64 are variants that work on an u64,
- and fls is used to implement them.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 83002a77cbdf383015ca384eff5fa31722d8e571
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Mon Jun 9 22:58:48 2008 +0200
- i.MX31: Cleanup comments in lowlevel_init.S.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit f8cc312bbee69257d741dc9f4062f4a0f5adf609
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Jun 8 23:28:33 2008 -0700
- Move conditional compilation of MPC8XXX SPI driver to Makefile
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit d92ea21bafb674ee2bf27447970b047845e7b0a2
- Author: Juergen Kilb <J.Kilb@gmx.de>
- Date: Sun Jun 8 17:59:53 2008 +0200
- i.MX31: fixed CTRL-C detection
- The Register URXD contains status information in bits [15..8].
- With status bit 15 set, CTRL-C was reported as 0x8003 instead
- of 0x03. Therefore CTRL-C was not detected.
- To solve this, bits [15..8] were masked out now.
- Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
- Acked-by: Felix Radensky <felix@embedded-sol.com>
- commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jul 1 17:03:19 2008 +0200
- ppc4xx: Fix 460EX/GT PCIe port initialization
- This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
- configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
- this out.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b571afde0295b007a45055ee49f8822c753a5651
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Jun 7 12:29:52 2008 +0200
- add SHA256 support
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>
- commit 3bab76a26e03df4ff81342fcc16393ce37d9766b
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Jun 6 23:07:40 2008 +0200
- Delay FIT format check on sector based devices
- Global FIT image operations like format check cannot be performed on
- a first sector data, defer them to the point when whole FIT image was
- uploaded to a system RAM.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
- NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>
- commit 9810263afec5ac5f38f92963bb3b6d799e4331d0
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Jun 3 17:38:19 2008 +0800
- sata: wait for device updating signature to host
- The driver need wait for the device updating signature to host.
- If we don't wait for it, the driver can not detect the device(disk)
- when the system powers up.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 745d8a0d3cea82e6d1753e14afb4588c34761b15
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jun 28 14:56:17 2008 +0200
- ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic
- This patch implements a fix provided by AMCC so that the lockup upon
- simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
- anymore:
- Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
- (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
- USB 2.0 host and SATA.
- This errata is not officially available yet. I'll update the comment
- to add the errata number later.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8b616edb118e37d05f6401389eaee1c636b22828
- Author: Stuart Wood <stuart.wood@labxtechnologies.com>
- Date: Mon Jun 2 16:42:19 2008 -0400
- serial_pl010.c: add watchdog support
- Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
- commit 86d3273e2b7be3fffb45e20c08535d6ad3aded6b
- Author: Stuart Wood <stuart.wood@labxtechnologies.com>
- Date: Mon Jun 2 16:40:08 2008 -0400
- jffs2_1pass.c: add watchdog support
- Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
- commit 5744ddc6637fea4f7b911a54a5fa860cb81a5d89
- Author: Sascha Laue <sascha.laue@liebherr.com>
- Date: Fri May 30 09:48:14 2008 +0200
- Configure DSP POST; add watchdog reset to diag command
- Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
- commit f13526517859bf6b573e23ff47199e107d1009b5
- Author: Tor Krill <tor@excito.com>
- Date: Thu May 29 10:40:17 2008 +0200
- Add sata sil3114 support
- Signed-off-by: Tor Krill <tor@excito.com>
- commit e093a247628228100f405b6d7f6b1bfc16141938
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jun 28 23:34:37 2008 +0200
- Coding Style Cleanup
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 01db232dd7a0ceb81208a9f2545720c80e5bfd83
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jun 28 23:16:01 2008 +0200
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c7f879ec2b389c4f2bf726b293bd516f4c692e03
- Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Date: Wed May 21 13:58:41 2008 -0400
- ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)
- This patch adds support for the Lyrtech SFF-SDR board,
- based on the TI DaVinci architecture (ARM926EJS).
- Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
- Signed-off-by: Philip Balister <philip@balister.org>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 341188b9ccaa8d4462d772cc067aca8d7618633a
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu May 22 11:09:59 2008 +0200
- MMC: Consolidate MMC/SD command definitions
- This moves the MMC and SD Card command definitions from
- include/asm/arch/mmc.h into include/mmc.h. These definitions are
- given by the MMC and SD Card standards, not by any particular
- architecture.
- There's a lot more room for consolidation in the MMC drivers which
- I'm hoping to get done eventually, but this patch is a start.
- Compile-tested for all avr32 boards as well as lpc2292sodimm and
- lubbock. This should cover all three mmc drivers in the tree.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit fa60edfc4c952626e048c0e065f654b3c1822fa5
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Wed May 21 14:38:08 2008 +0900
- Use better Ethernet timings for apollon board
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 41c5eaa7253ed82bbae1eda5667755872c615164
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jun 16 13:58:56 2008 -0500
- Resize device tree to allow space for board changes and the chosen node
- Current code requires that a compiled device tree have space added to the end to
- leave room for extra nodes added by board code (and the chosen node). This
- requires that device tree creators anticipate how much space U-Boot will add to
- the tree, which is absurd. Ideally, the code would resize and/or relocate the
- tree when it needed more space, but this would require a systemic change to the
- fdt code, which is non-trivial. Instead, we resize the tree inside
- boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
- where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 7570a9941fc565922078679a72d246fe208d696d
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jun 16 13:58:55 2008 -0500
- Fix an underflow bug in __lmb_alloc_base
- __lmb_alloc_base can underflow if it fails to find free space. This was fixed
- in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc. This patch
- merely updates __lmb_alloc_base to resemble the current version in Linux.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 63796c4e61b207d2e635729d41b7a7f7d188b03c
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jun 16 13:58:54 2008 -0500
- Add lmb_free
- lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
- lmb_reserve to temporarily reserve some memory.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Jun 16 13:58:53 2008 -0500
- Add ALIGN() macro
- ALIGN() returns the smallest aligned value greater than the passed
- in address or size. Taken from Linux.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 93262af85e3e9d9974c6c08fbd37a9a72e090ca2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jun 24 17:15:22 2008 +0200
- ppc4xx: Fix compilation problems with phys_size_t
- This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
- board specific files where it has been missing.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 28eab0d77352b84885f938759bf2612b7bf0bc44
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon May 19 12:26:38 2008 +0200
- Conditionally add -fno-stack-protector to CFLAGS
- When compile-testing on powerpc, I get errors like this:
- net/nfs.c:422: undefined reference to `__stack_chk_fail_local'
- This seems to be because -fstack-protector is on by default, so
- let's explicitly disable it on all architectures that support the
- option.
- The Ubuntu toolchain is affected by this problem, and according to
- Mike Frysinger, Gentoo has been running with SSP enabled for years.
- More and more distros are turning SSP on by default, so this problem
- is likely to get worse in the future.
- Also, powerpc just happens to be one of the arches I do
- compile-testing on. There may be other arches affected by this too.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit dfd3be881c03a26e31f0dea4a42e76061fa610ac
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:52 2008 +0200
- pcmcia/ti_pci1410a: Move compile condition to the Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:51 2008 +0200
- pxa_pcmcia: Move compile condition to the Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c9eff32881fb429101c937cf8c268f1d42e5c2a9
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:50 2008 +0200
- marabun_pcmcia: Move compile condition to the Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6a19c46cae43c16c528eddefae3db97134f1915d
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Mon Jun 23 13:25:34 2008 +0200
- fix non-working mvBL-M7
- Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 846f1574ddddeda2bc227655e687308695f41cdc
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Mon Jun 23 11:40:56 2008 +0200
- fix system config overwrite @ MPC834x and MPC8313
- During 83xx setup the "System I/O configuration register high" gets
- overwritten with user defined value if CFG_SICRH is defined.
- Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
- must keep their reset value regardless of configuration.
- On my board (using RGMII) those bits are set after reset - yet it's
- unclear where they come from.
- The patch keeps both bits on MPC834x and MPC8313.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 4890246a2c5df90a74e2941e3673a49bbd36aee9
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jun 17 17:45:27 2008 -0500
- mpc83xx: move CPU_TYPE_ENTRY over to processor.h
- to avoid this:
- cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
- In file included from cpu.c:33:
- /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit aac7a5095b968d6c9a3e6422f31b4ad203cac9c8
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 23 11:15:09 2008 +0200
- ppc4xx: Fix problem in gpio_config()
- As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted
- left by one. So the additional shift is bogus.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 40777812316fc252c941665c0f60c148fd79d50f
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Jun 20 22:24:05 2008 +0200
- fdt: Fix typo in variable name.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 5f723a3b98c630bde33de74351f2121691fdef14
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri Jun 20 10:41:05 2008 +0200
- avr32: Enable SPI flash support on ATNGW100
- The ATNGW100 has 8MB DataFlash on board. Give users access to it through
- the new SPI flash framework.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 5605ef6b5802921cbefe6a933a9dea3497396b5c
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri Jun 20 12:44:28 2008 +0200
- avr32: Fix SPI portmux initialization
- Use the new GPIO manipulation functions to set up the chip select lines,
- and make sure both busses use GPIO for chip select control.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 4688f9e34a87e825aed34d07c9ca7a273e6fc8ab
- Author: Peter Ma <pma@mediamatech.com>
- Date: Sun Jun 1 22:59:24 2008 -0700
- avr32: Add GPIO manipulation functions
- Adds GPIO manipulation functions for AVR32 AP7 platform.
- Signed-off-by: Peter Ma <pma@mediamatech.com>
- [haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:02:30 2008 +0200
- MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
- This patch is based on the following patch sent a few minutes ago:
- "NAND FSL UPM: driver re-write using the hwcontrol callback"
- It is untested, of course. Anton, could you please give it a try.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 96026d42fa4e646d28318c0a1438aac4b2017909
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Jun 12 12:40:11 2008 +0200
- Fix 4xx build issue
- Building for 4xx doesn't work since commit 4dbdb768:
- In file included from 4xx_pcie.c:28:
- include/asm/processor.h:971: error: expected ')' before 'ver'
- make[1]: *** [4xx_pcie.o] Error 1
- This patch fixes the problem.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- Acked-by: Stefan Roese <sr@denx.de>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit a036b0443657fe0f4773786de9092251869f08ac
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jun 19 01:45:50 2008 -0500
- MPC8610HPCD: Report board id, board version and fpga version.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jun 19 01:45:27 2008 -0500
- MPC8641HPCN: Report board id, board version and fpga version.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 16 10:40:02 2008 +0200
- cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably
- This patch simplifies flash_toggle() (AMD commandset), which is used to
- detect if a FLASH device is still busy with erase/program operations. On
- 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
- did not detect the busy state reliably, resulting in non erased sectors
- etc. This patch now simplifies this function by "just" comparing the
- complete data-word instead of ANDing it with the command-word (0x40)
- before the compatison. It is done the same way in the Linux implementation
- chip_ready() in cfi_cmdset_0002.c.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9e4006bca3d9fb4a2d061996771036cb01e539d3
- Author: Philip Balister <philip@balister.org>
- Date: Mon Jun 16 08:58:07 2008 -0400
- NAND: Add missing declaration to non-redundant saveenv().
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Mon Jun 2 15:09:55 2008 +0200
- MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jun 10 15:34:11 2008 +0200
- ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output
- This patch disables the square wave output of the M41T62 RTC used on
- Canyonlands & Glacier. Here the explanation:
- The serial real-time clock part used in the design is an
- STMicro M41T62. This part has a full-time 32KHz square wave
- output that is connected to the TmrClk input to the
- processor. The default state for this square wave output is
- enabled so the output runs continuously when the board is
- powered normally and also from the battery. The TmrClk input
- to the processor goes to ground when the power is removed
- from the board/processor, and therefore the running square
- wave output is driving ground which drains the battery quickly.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a94f22f08f280905926219e568568964cb9eeb9d
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Jun 11 18:10:20 2008 -0500
- Fix build issue with string.h and linux/string.h
- This commit:
- commit 338cc038461a6c7709c5b86fd9a240209338a1ae
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jun 6 14:28:14 2008 +0200
- tools/mkimage: fix compiler warnings on some systems.
- Broke building on some systems, because the host's string.h was interfering
- with u-boot's linux/string.h. It doesn't look like we need the u-boot one if
- we're building for the host, so now we only include when building inside
- u-boot.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 9973e3c614721bbf169882ffc3be266a6611cd60
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Jun 9 16:03:40 2008 -0500
- Change initdram() return type to phys_size_t
- This patch changes the return type of initdram() from long int to phys_size_t.
- This is required for a couple of reasons: long int limits the amount of dram
- to 2GB, and u-boot in general is moving over to phys_size_t to represent the
- size of physical memory. phys_size_t is defined as an unsigned long on almost
- all current platforms.
- This patch *only* changes the return type of the initdram function (in
- include/common.h, as well as in each board's implementation of initdram). It
- does not actually modify the code inside the function on any of the platforms;
- platforms which wish to support more than 2GB of DRAM will need to modify
- their initdram() function code.
- Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
- MPC8641HPCN.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 391fd93ab23e15ab3dd58a54f5b609024009c378
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Jun 9 20:37:18 2008 -0500
- Change lmb to use phys_size_t/phys_addr_t
- This updates the lmb code to use phys_size_t
- and phys_addr_t instead of unsigned long. Other code
- which interacts with this code, like getenv_bootm_size()
- is also updated.
- Booted on MPC8641HPCN, build-tested ppc, arm, mips.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 61b09fc2952dc636017df4e7970e3de132276ba1
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Jun 9 20:37:17 2008 -0500
- Change print_size to take phys_size_t
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Mon Jun 9 20:37:16 2008 -0500
- Change bd/gd memsize/ram_size to be phys_size_t.
- Currently, both are defined as an unsigned long, but
- should be phys_size_t. This should result in no real change,
- since phys_size_t is currently an unsigned long for all the
- default configs. Also add print_lnum to cmd_bdinfo to deal
- with the potentially wider memsize.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit ba04f7010958e88a8910f2a123fee53fdc72e013
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Jun 10 16:16:02 2008 -0500
- FSL LAW: Add new interface to use the last free LAW
- LAWs have the concept of priority so its useful to be able to allocate
- the lowest (highest number) priority. We will end up using this with the
- new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 859a86a25c569d3665ff413d1d923394b8a961f3
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jun 11 00:51:45 2008 -0500
- 85xx/86xx: Move to dynamic mgmt of LAWs
- With the new LAW interface (set_next_law) we can move to letting the
- system allocate which LAWs are used for what purpose. This makes life
- a bit easier going forward with the new DDR code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- Acked-by: Becky Bruce <becky.bruce@freescale.com>
- commit f060054dadbbe7027ca088eed806a3ef1f82fdb7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jun 11 00:44:10 2008 -0500
- FSL LAW: Keep track of LAW allocations
- Make it so we keep track of which LAWs have allocated and provide
- a function (set_next_law) which can allocate a LAW for us if one is
- free.
- In the future we will move to doing more "dynamic" LAW allocation
- since the majority of users dont really care about what LAW number
- they are at.
- Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit ddde74a159caa6e18b481fec01d40b885aebb566
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jun 9 22:31:57 2008 -0500
- 85xx: remove dummy board_early_init_f
- A number of board ports have empty version of board_early_init_f
- for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 81e56e9af0d43712db8efb843606a8d62eab454f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jun 9 18:55:38 2008 -0500
- MPC8544DS: Update config.h
- * Enable flash progress
- * remove CLEAR_LAW0 since we dont really use it
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 978e81604c1b28526ed580df0fbe64eb8384e94f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jun 9 13:37:24 2008 -0500
- 85xx: Remove unused and unconfigured memory test code.
- Remove unused and unconfigured DDR test code from FSL 85xx boards.
- Besides, other common code exists.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:45 2008 +0200
- Socrates: Added FPGA base address update in FDT.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:44 2008 +0200
- Socrates: NAND support added. Changed the U-Boot base address and
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 248ae5cfc8bf69074d1da099dc495d8e06070547
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:43 2008 +0200
- NAND: Added support for 128-bit OOB, adapted
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 31ca0208612f2eb57690110d7c2815953650e47b
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:42 2008 +0200
- Socrates: added missed file with UPMA configuration data.
- Signed-of-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:41 2008 +0200
- Socrates: Added FPGA mapping. LAWs and TLBs cleanup.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 740280e68ccc0b971e613face7eaaa8bd1382b8c
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:40 2008 +0200
- Added the upmconfig() function for 85xx.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit d39e68514ff943930ee692cff3fde03532eb7fec
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Fri Jun 6 15:42:39 2008 +0200
- Socrates: config file cleanup.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit e8cc3f04b124f757af4528206e60d8eb715ae083
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:10 2008 +0200
- TQM85xx: Change memory map to support Flash memory > 128 MiB
- Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash
- memory. The current memory map only supports up to 128 MiB Flash.
- This patch adds the configuration option CONFIG_TQM_BIGFLASH. If
- set, up to 1 GiB flash is supported. To achieve this, the memory
- map has to be adjusted in great parts (for example the CCSRBAR is
- moved from 0xE0000000 to 0xA0000000).
- If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new
- memory map also has to be considered in the kernel (changed
- CCSRBAR address, changed PCI IO base address, ...). Please use
- an appropriate Flat Device Tree blob (tqm8548.dtb).
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:09 2008 +0200
- TQM85xx: NAND support via local bus UPMB
- This patch adds support for NAND FLASH on the TQM8548. It is disabled by
- default and can be enabled for the TQM8548 modules. It is now based on
- the re-written FSL NAND UPM driver. A patch has been posted earlier today
- with the subject:
- "NAND FSL UPM: driver re-write using the hwcontrol callback"
- Note that the R/B pin is not supported by that module requiring to use
- the specified maximum delay time.
- Note: With NAND support enabled the size of the U-Boot image exceeds
- 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
- doubling the image size :-(.
- Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit b9e8078bb3f3c48111a7081e27279938c3a445e1
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:08 2008 +0200
- TQM8548: PCI express support
- This patch adds support for PCI express cards. The board support
- now uses common FSL PCI init code, for both, PCI and PCIe on all
- TQM85xx modules.
- Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:07 2008 +0200
- TQM8548: Basic support for the TQM8548 modules
- This patch adds basic support for the TQM8548 module from TQ-Components
- (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
- eTSEC 3 and 4
- Furthermore Flash buffer write has been enabled to speed up output to
- the Flash by approx. a factor of 10.
- Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 25991353204c78b094c3c1fec90182dcd607ab8f
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:06 2008 +0200
- TQM85xx: Support for Flat Device Tree
- This patch adds support for Linux kernels using the Flat Device Tree.
- It also re-defines the default environment settings for booting Linux
- with the FDT blob.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit d9ee843d54c54776e1fdb86336ce554906a87331
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:05 2008 +0200
- TQM85xx: Support for Intel 82527 compatible CAN controller
- This patch adds initialization of the UPMC RAM to support up to two
- Intel 82527 compatible CAN controller on the TQM85xx modules.
- Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 518d5cfe72916323c746af1647764459914f555f
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:04 2008 +0200
- TQM85xx: Bugfix in the SDRAM initialisation
- The CS0_BNDS register is now set according to the detected
- memory size.
- Signed-off-by Martin Krause <martin.krause@tqs.de>
- commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:03 2008 +0200
- TQM85xx: Fix chip select configuration for second FLASH bank
- This patch fixes the re-calculation of the automatic chip select
- configuration for boards with two populated FLASH banks.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:02 2008 +0200
- TQM85xx: Support for Spansion 'N' type flashes added
- The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors,
- than the formerly used 'M' types (S29GLxxxM series), so the flash layout
- needs to be changed -> new start address of the environment. The macro
- definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be
- defined for boards with 'N' type flashes.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 5d5bd838f76eade22c0ea40a500389f924d0da36
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:01 2008 +0200
- TQM85xx: Fix CPM port pin configuration
- Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
- board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
- as serial interface anyway. Worse, on some board variants configuring the
- pins for SCC1 leads to short circuits (for example on the TQM8541-BG).
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit b99ba1679e8cd51b023e67098c89e606e47137d2
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:12:00 2008 +0200
- TQM85xx: Various coding style fixes
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue Jun 10 22:15:58 2008 -0400
- libfdt: Move the working_fdt pointer to cmd_fdt.c
- The working_fdt pointer was declared in common/fdt_support.c but was
- not used there. Move it to common/cmd_fdt.c where it is used (it is
- also used in lib_ppc/bootm.c).
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jun 10 11:06:17 2008 -0500
- fdt: unshadow global working fdt variable
- differentiate with local variables of the same name by renaming the
- global 'fdt' variable 'working_fdt'.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e1eb0e25d9d8fd8efdfb93f670a417663f386022
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Jun 10 18:49:34 2008 -0500
- socrates: Fix PCI clk fix patch
- The submitted patch seems to have been more up-to-date, but an older patch was
- already in the repository. This patch encompasses the differences
- Taken entirely from Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:02:29 2008 +0200
- NAND FSL UPM: driver re-write using the hwcontrol callback
- This is a re-write of the NAND FSL UPM driver using the more universal
- hwcontrol callback (instead of the cmdfunc callback). Here is a brief
- list of furher modifications:
- - For the time being, the UPM setup writing the UPM array has been
- removed from the driver and must now be done by the board specific
- code.
- - The bus width definition in "struct fsl_upm_nand" is now in bits to
- comply with the corresponding Linux driver and 8, 16 and 32 bit
- accesses are supported.
- - chip->dev_read is only set if fun->dev_ready != NULL, which is
- required for boards not connecting the R/B pin.
- - A few issue have been fixed with MxMR bit manipulation like in the
- corresponding Linux driver.
- Note: I think the "io_addr" field of "struct fsl_upm" could be removed
- as well, because the address is already determined by
- "nand->IO_ADDR_[RW]", but I'm not 100% sure.
- This patch has been tested on a TQM8548 modules with the NAND chip
- Micron MT29F8G08FABWP.
- This patch is based on the following patches posted to this list a few
- minutes ago:
- PPC: add accessor macros to clear and set bits in one shot
- 83xx/85xx/86xx: add more MxMR local bus definitions
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 6beecfbb542992eede5831240cd58678274683a9
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Thu Jun 5 13:11:59 2008 +0200
- MPC85xx: Beautify boot output of L2 cache configuration
- The boot output is now aligned poperly with other boot output
- lines, e.g.:
- FLASH: 128 MB
- L2: 512 KB enabled
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 398415114f0a705163a14543e9fef03f734b1ffa
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Wed Jun 4 12:45:22 2008 +0200
- PPC: add accessor macros to clear and set bits in one shot
- PPC: add accessor macros to clear and set bits in one shot
- This patch adds macros from linux/include/asm-powerpc/io.h to clear and
- set bits in one shot using the in_be32, out_be32, etc. accessor functions.
- They are very handy to manipulate bits it I/O registers.
- This patch is required for my forthcoming FSL NAND UPM driver re-write and
- the support for the TQM8548 module.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 4677988c7edc070c3786d3db7994abeca3ab82a0
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Wed Jun 4 13:52:17 2008 +0200
- TQM: move TQM boards to board/tqc
- Move all TQM board directories to the vendor specific directory "tqc"
- for modules from TQ-Components GmbH (http://www.tqc.de).
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Mon Jun 2 12:09:30 2008 +0200
- 83xx/85xx/86xx: add more MxMR local bus definitions
- 83xx/85xx/86xx: add more MxMR local bus definitions
- This patch adds more macro definitions for the UPM Machine Mode Registers
- They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
- common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
- required for my forthcoming FSL NAND UPM driver re-write and the support
- for the TQM8548 module.
- This patch is based on the following two patches from Anton Vorontsov:
- http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
- http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html
- I leave coding style violation fixes, code beautification and name
- corrections to somebody else ;-(.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- commit c8c5fc266e4499e283c293ccb972863156aa4134
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Thu May 29 18:14:56 2008 +0400
- 83xx/85xx: further localbus cleanups
- Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
- from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 42dbd667c88d496882d53e22656e89b654205492
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Wed May 28 18:20:15 2008 +0400
- 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
- This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
- use it on MPC85xx and MPC86xx processors.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu May 29 11:22:06 2008 -0500
- 85xx: Add setting of cache props in the device tree.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4dbdb7681e243431530df0725627192a0c4aefda
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Jun 10 16:53:46 2008 -0500
- 85xx: expose cpu identification
- The current cpu identification code is used just to return the name
- of the processor at boot. There are some other locations that the name
- is useful (device tree setup). Expose the functionality to other bits
- of code.
- Also, drop the 'E' suffix and add it on by looking at the SVR version
- when we print this out. This is mainly to allow the most flexible use
- of the name. The device tree code tends to not care about the 'E' suffix.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2329fe113d847e43cca8e4a0e4edd613b50b8492
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jun 10 13:25:24 2008 -0500
- mpc83xx: MVBLM7: minor build fixups
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit a1293e549b56da135ef32ffca5b9d35a16aa6802
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Tue Jun 10 09:14:05 2008 +0200
- add MPC8343 based board mvBlueLYNX-M7 (board+make files)
- Add MPC8343 based board mvBlueLYNX-M7.
- It's a single board stereo camera system.
- Please read doc/README.mvblm7 for details.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c005b93925ba49f07da2aa748527996d927e172f
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Tue Jun 10 09:13:16 2008 +0200
- add MPC8343 based board mvBlueLYNX-M7 (doc+config)
- Add MPC8343 based board mvBlueLYNX-M7.
- It's a single board stereo camera system.
- Please read doc/README.mvblm7 for details.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Thu May 29 18:14:56 2008 +0400
- 83xx/85xx: further localbus cleanups
- move the BRx_* and ORx_* left behind in mpc85xx.h
- The same is needed for mpc8xx.h and mpc8260.h (defines are almost
- the same, just few differences which needs some attention though).
- But the bad news for mpc8xx and mpc8260 is that there are a lot of users
- of these defines. So this cleanup I'll leave for the "better times".
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit bf30bb1f7c954d7855d9b23624b33b00c50b4697
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Wed May 28 18:20:15 2008 +0400
- 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
- This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
- use it on MPC85xx and MPC86xx processors.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a
- Author: Tor Krill <tor@excito.com>
- Date: Mon Jun 2 15:09:30 2008 +0200
- Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h
- Signed-off-by: Tor Krill <tor@excito.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 3b904ccb93c3196727e2e9870cb1df903cab19ad
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Mon Jun 9 23:37:44 2008 +0900
- net: Conditional COBJS inclusion of network drivers
- Replace COBJS-y with appropriate driver config names.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 2fb698bf50f4aff2485581a12fa634a07c040e4a
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Mon Jun 9 21:02:17 2008 -0400
- Use strncmp() for the fdt command
- Cleaner than doing multiple conditionals on characters.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Jun 7 12:25:05 2008 -0400
- The fdt boardsetup command criteria was not unique
- It was checking just for "b", which is not unique with respect to the
- "boot" command. Change to check for "boa"[rdsetup].
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 2f08bfa9526bae4f461e043530cfb903fec0d273
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Tue May 20 17:19:11 2008 +1000
- libfdt: Several cleanups to parameter checking
- This patch makes a couple of small cleanups to parameter checking of
- libfdt functions.
- - In several functions which take a node offset, we use an
- idiom involving fdt_next_tag() first to check that we have indeed been
- given a node offset. This patch adds a helper function
- _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().
- - In fdt_rw.c in several places we have the expanded version
- of the RW_CHECK_HEADER() macro for no particular reason. This patch
- replaces those instances with an invocation of the macro; that's what
- it's for.
- - In fdt_sw.c we rename the check_header_sw() function to
- sw_check_header() to match the analgous function in fdt_rw.c, and we
- provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
- functions in fdt_rw.c
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit fec6d9ee7c10443f65ce1788ef818919167bbf2e
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue Jun 3 20:34:45 2008 -0400
- Remove the deprecated CONFIG_OF_FLAT_TREE
- Use CONFIG_OF_LIBFDT instead to support flattened device trees. It is
- cleaner, has better functionality, and is better supported.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 62bcdda293efa752f8281fbd9da03822b27ce82f
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue Jun 3 20:26:29 2008 -0400
- Change the stxxst to CONFIG_OF_LIBFDT
- This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
- to CONFIG_OF_LIBFDT.
- WARNING: It appears that this board lost its ability to boot via a
- flattened device tree prior to this changeset.
- WARNING: This conversion was untested because I do not have a board to
- test it on.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 589c04271d129729a8b01391453851ab9cc4069c
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue Jun 3 20:24:58 2008 -0400
- Convert mpc7448hpc2 to CONFIG_OF_LIBFDT
- This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
- to CONFIG_OF_LIBFDT.
- WARNING: This conversion is untested because I do not have a board to
- test it on.
- NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
- /aliases/ethernet1 property for the ethernet to work.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit ee1e35bede91debc8bff9b02f75574486033b652
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu May 29 01:21:24 2008 -0500
- 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3b9519fc50802436e417c839e69df7b2016cade5
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed May 14 13:10:04 2008 -0500
- MPC85xx: Change traps.c to not reference non-addressable memory
- Currently, END_OF_RAM is used by the trap code to determine if
- we should attempt to access the stack pointer or not. However,
- on systems with a lot of RAM, only a subset of the RAM is
- guaranteed to be mapped in and accessible. Change END_OF_RAM
- to use get_effective_memsize() instead of using the raw ram
- size out of the bd.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 7faddaecea52f585f538fdf9c2e61f85a789b19c
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Mon Jun 9 13:39:57 2008 +0900
- sh: Renesas Solutions SH7763RDP board support
- SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
- In this patch, support SCIF, NOR Flash, and Ethernet.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 60179098a95eaa972007d7ec58e4c1588029720f
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Fri Jun 6 16:24:13 2008 +0900
- sh: Add support Renesas SH7763
- Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
- This patch supprts CPU register's header file.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 08c5fabe181d663eec0feba5ecd02c0b78934a52
- Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Date: Fri Jun 6 16:16:08 2008 +0900
- sh: SH7763 SCIF support
- SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
- but only SCIF2 is different. This patch work all SCIF channel.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 79b51ff8205f0354d5300570614c1d2db499679c
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Jun 7 20:51:59 2008 +0900
- [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines
- Also get rid of some #ifdefs in *.c files.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 8bde63eb3f79d68f693201528dafc8ae7aa087de
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Jun 7 20:51:56 2008 +0900
- [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*
- CONFIG_SOC_AU1X00
- Common Alchemy Au1x00 stuff. All Alchemy processor based machines
- need to have this config as a system type specifier.
- CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
- CONFIG_SOC_AU1500, CONFIG_SOC_AU1550
- Machine type specifiers. Each port should have one of aboves.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc
- Author: Stuart Wood <stuart.wood@labxtechnologies.com>
- Date: Fri May 30 16:05:28 2008 -0400
- env_nand.c: Added bad block management for environment variables
- Modified to check for bad blocks and to skipping over them when
- CFG_ENV_RANGE has been defined.
- CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
- flash block size.
- Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 279726bd00558e80263d44581c44167625b7fb9a
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed May 14 13:09:58 2008 -0500
- MPC86xx: Change traps.c to not reference non-addressable memory
- Currently, END_OF_RAM is used by the trap code to determine if
- we should attempt to access the stack pointer or not. However,
- on systems with a lot of RAM, only a subset of the RAM is
- guaranteed to be mapped in and accessible. Change END_OF_RAM
- to use get_effective_memsize() instead of using the raw ram
- size out of the bd to prevent us from trying to access
- non-mapped memory.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 338cc038461a6c7709c5b86fd9a240209338a1ae
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jun 6 14:28:14 2008 +0200
- tools/mkimage: fix compiler warnings on some systems.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b2815f79288d4da7a3ba18bdbd05120ce09d5622
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 6 16:10:41 2008 +0200
- ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
- We use upper case letters for the AMCC processor defines (like
- CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
- not CONFIG_440SPe. This patch fixes the last misspelled config options.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 72675dc6c06a48846d180106161d49dd714383cc
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 6 15:55:21 2008 +0200
- ppc4xx: Unify AMCC's board config files (part 3/3)
- This patch series unifies the AMCC eval board ports by introducing
- a common include header for all AMCC eval boards:
- include/configs/amcc-common.h
- This header now includes all common configuration options/defines which
- are removed from the board specific headers.
- The reason for this is ease of maintenance and unified look and feel
- of all AMCC boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 490f204096d6e2c9940f67816f154a8125bab116
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 6 15:55:03 2008 +0200
- ppc4xx: Unify AMCC's board config files (part 2/3)
- This patch series unifies the AMCC eval board ports by introducing
- a common include header for all AMCC eval boards:
- include/configs/amcc-common.h
- This header now includes all common configuration options/defines which
- are removed from the board specific headers.
- The reason for this is ease of maintenance and unified look and feel
- of all AMCC boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a8a11a9ed046b480a16e47a158f8f5300028dfa6
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 6 15:54:31 2008 +0200
- ppc4xx: Unify AMCC's board config files (part 1/3)
- This patch series unifies the AMCC eval board ports by introducing
- a common include header for all AMCC eval boards:
- include/configs/amcc-common.h
- This header now includes all common configuration options/defines which
- are removed from the board specific headers.
- The reason for this is ease of maintenance and unified look and feel
- of all AMCC boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Thu Jun 5 13:03:36 2008 +0200
- DM9000 fix status check fail 0x6d error for trizeps board
- According to the Application Notes of the DM9000, only the 2 bits 0:1 of
- the status byte need to be checked to identify a valid packet in the fifo
- But, The several different Application Notes do not all speak the same
- language on these bits. They do not disagree, but only 1 Application Note
- noted explicitly that only these 2 bits need to be checked.
- Even the datasheets do not mention anything about these 2 bits.
- Because the old code, and the kernel check the whole byte, I left this piece
- untouched.
- However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
- it should work.
- Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
- in the fifo) is much shorter now, compared to the older U-boot driver code,
- so that we can maybe run into a hardware condition now that was never seen
- before, or maybe was seen very unfrequently.
- Additionaly added a cleanup of a stack variable.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Jun 5 22:29:00 2008 +0900
- [MIPS] Update <asm/addrspace.h> header
- - Fix traditional KSEG names
- - Replace PHYSADDR with CPHYSADDR
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit f0d5a6f060d00358b85c62a921a423ea8df71184
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Jun 5 22:29:00 2008 +0900
- [MIPS] mips_config.mk: Misc fixes
- - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
- - Modify comments
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 5f64d21c9a2998794f255b469165b91f092dfc2d
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Jun 5 22:29:00 2008 +0900
- [MIPS] Kill unused <version.h> inclusions
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit a55d48174cfd1a5bc184159513f48dcbbe409c83
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Jun 5 22:29:00 2008 +0900
- [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines
- MIPS port has two problems in timer routines. One is now we assume CFG_HZ
- equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
- in the U-Boot system.
- The other is we don't have a proper time management counter like timestamp
- other ARCHs have. We need the 32-bit millisecond clock counter.
- This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
- 32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
- of calculated CP0 counter cycles in a CFG_HZ.
- STRATEGY:
- * Fix improper CFG_HZ value to have 1000
- * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.
- * timer_init: initialize timestamp and set up the first timer expiration.
- Note that we don't need to initialize CP0 count/compare registers here
- as they have been already zeroed out on the system reset. Leave them as
- they are.
- * get_timer: calculate how many timestamps have been passed, then return
- base-relative timestamp. Make sure we can easily count missed timestamps
- regardless of CP0 count/compare value.
- * get_ticks: return the current timestamp, that is get_timer(0).
- Most parts are from good old Linux v2.6.16 kernel.
- v2:
- - Remove FIXME comments as they turned out to be trivial.
- - Use CP0 compare register as a global variable for expirelo.
- - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
- instead.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Jun 5 22:29:00 2008 +0900
- [MIPS] lib_mips/time.c: Fix udelay
- What we have to do is just to wait for given micro-seconds. No need to
- take into account current time, get_timer and CFG_HZ.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Jun 5 22:28:59 2008 +0900
- [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros
- We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
- This patch replaces mips_{compare,count}_set and mips_count_get with
- existing macros.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 6b52cfe16cd539935e32bd8cf19146522e462a4d
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:48:17 2008 +0200
- Get rid of annoying/superfluous bad-checksum warning message
- U-boot can complain a lot about 'checksum bad' when it is attached to the network.
- It is annoying for ordinary users who start to doubt the network connection
- in general when they see messages like this.
- This is caused by the routine NetCksumOk() which cannot handle IP-headers longer
- than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them
- now before checking the checksum.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit d6ee5fa40c26970d39990c6fc4a2f20a97822650
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Wed Jun 4 10:47:25 2008 +0200
- Fix order for reading rx-status registers in 32bit mode of DM9000
- A last minute cleanup before submitting the DM9000A patch series yesterday introduced
- a bug in reading the rx-status registers in 32bit mode only.
- This patch repairs this.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 98291e2e689096420465074cce926b226d2e71b4
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:26:26 2008 +0200
- DM9000: Some minor code cleanups
- Some lines of the U-boot DM9000x driver are longer than 80 characters, or
- need some other minor cleanup.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 850ba7555dbd4ca8d14fc475b864d534797adab3
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:26:25 2008 +0200
- DM9000: Make driver work properly for DM9000A
- The DM9000A network controller does not work with the U-boot DM9000x driver.
- Analysis showed that many incoming packets are lost.
- The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
- check for a valid rx packet be done on the interrupt status register, not
- directly by performing the dummy read and the rx status check as is currently
- the case in the u-boot driver.
- When the recommended poll is done as suggested the driver starts working
- correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
- can be more than 1 package in the fifo at the same time.
- The driver must perform the rx-status check in a loop and read and handle all
- packages until there is no more left _after_ the interrupt RX flag is set.
- This change has been tested with DM9000A, DM9000E, DM9000EP.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:26:24 2008 +0200
- DM9000: Improve eth_reset() routine
- According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
- reset procedure must be done twice to properly reset the DM9000 by means of software.
- This errata is not needed anymore for the DM9000A, but it does not bother it.
- This change has been tested with DM9000A, DM9000E, DM9000EP.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit acba31847fad9ae40708cc2c9f3a634ec35f3416
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:26:23 2008 +0200
- DM9000: improve eth_send() routine
- The eth_send routine of the U-boot DM9000x driver does not match the
- DM9000 or DM9000A application notes/programming guides.
- This change improves the stability of the DM9000A network controller.
- This change has been tested with DM9000A, DM9000E, DM9000EP.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 134e266253c02a7832560da59d394989c4f64453
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:26:22 2008 +0200
- DM9000: repair debug logging
- It seems that the debugging code of the DM9000x driver in U-boot has not been
- compiled for a long time, because it cannot compile...
- Also rearranged some loglines to get more useful info while debugging.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit a101361bfe23c120321e45d114c0603b8e0763e9
- Author: Remy Bohmer <linux@bohmer.net>
- Date: Tue Jun 3 15:26:21 2008 +0200
- DM9000: Add data bus-width auto detection.
- The U-boot DM9000x driver contains a compile time bus-width definition for
- the databus connected to the network controller.
- This compile check makes the code unclear, inflexible and is unneccessary.
- It can be asked to the network controller what its bus-width is by reading bits
- 6 and 7 of the interrupt status register.
- The linux kernel already uses a runtime mechanism to determine this bus-width,
- so the implementation below looks somewhat like that implementation.
- This change has been tested with DM9000A, DM9000E, DM9000EP.
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 63a0afa0c32e5f4ea98a9439542870072437404d
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jun 4 19:19:20 2008 +0200
- ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port
- This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
- introduced by the commit:
- ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
- With this patch SDRAM will get initialized again and booting from NAND
- is working again.
- Signed-off-by: Stefan Roese <sr@denx.de>
- Acked-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
- commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue May 27 14:19:30 2008 +0200
- Socrates: Fix PCI bus frequency report
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f
- Author: Tor Krill <tor@excito.com>
- Date: Thu May 29 11:10:30 2008 +0200
- Fix incorrect switch for IF_TYPE in part.c
- Use correct field in block_dev_desc_t when writing interface type in
- dev_print. Error introduced in 574b3195.
- Also added fix from Martin Krause
- Signed-off-by: Tor Krill <tor@excito.com>
- commit b64b8a0bd310935b70af69ac970952f2b364ae56
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Tue May 27 10:25:39 2008 +0200
- Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- commit 35ef877f0a8f6232cdef748f442fed5accb2b641
- Author: Peter Tyser <ptyser@xes-inc.com>
- Date: Thu May 22 18:56:52 2008 -0500
- Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
- Removed unneeded command line history initialization. Also, the original
- code would access the 'initted' variable before relocation to SDRAM
- which resulted in erratic behavior since the bss is not initialized when
- executing from flash.
- Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
- commit 22f371b63038a4ecab04068877c1089e51a01ba1
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Wed May 21 13:28:30 2008 -0700
- PPC4xx: Simplified post_word_{load, store}
- This patch simplifies post_word_{load,store} by using the preprocessor
- to eliminate redundant, copy-and-pasted code.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- commit 9c048b523413ae5f3ff34e00cf57569c3368ab51
- Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
- Date: Wed May 7 21:25:33 2008 +0400
- cfi_flash: enable M18 flash chips family support.
- Added new command set ID. Buffered write command processing is changed
- in order to support M18 flash chips family.
- Signed-off-by: Alexey Korolev <akorolev@infradead.org>
- Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
- commit 93c56f212ccdadc182018f0769cb284426b88f1d
- Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
- Date: Wed May 7 21:24:44 2008 +0400
- cfi_flash: support of long cmd in U-boot.
- Some NOR flash chips needs support of commands with length grether than max
- value size of uchar. For example all M18 family chips use 0x1ff command in
- buffered write mode as value of program loops count.
- Signed-off-by: Alexey Korolev <akorolev@infradead.org>
- Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
- commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e
- Author: Stefan Roese <sr@denx.de>
- Date: Fri May 16 11:06:06 2008 +0200
- DTT: Issue one-shot command on AD7414 (LM75 code) to read temp
- On AD7414 the first value upon bootup is not read correctly.
- This is most likely because of the 800ms update time of the
- temp register in normal update mode. To get current values
- each time we issue the "dtt" command including upon powerup
- we switch into one-short mode.
- This patch fixes the problem on AD7414 equipped boards (Sequoia,
- Canyonlands etc), that temp value printed in the bootup log was
- incorrect.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit de5bfcf7b0425e032be12698252dbaa6b65a28c0
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri May 30 16:55:06 2008 +0200
- ppc4xx: Cleanup CPCI405 variant's config file
- This patch removes some dead code from CPCI405 board's
- config files. JFFS2 support is also removed. It's not used and
- CPCI4052 does not build anymore without some size reduction.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65
- Author: Kenneth Johansson <kenneth@southpole.se>
- Date: Thu May 29 16:32:33 2008 +0200
- Remove shell variable UNDEF_SYM.
- UNDEF_SYM is a shell variable in the main Makefile used to force the
- linker to add all u-boot commands to the final image. It has no use here.
- Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
- commit 8c66497e06bf803489c589df58ee591d71033274
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 16 11:10:35 2008 +0200
- Add support for environment in SPI flash
- This is pretty incomplete...it doesn't handle reading the environment
- before relocation, it doesn't support redundant environment, and it
- doesn't support embedded environment. But apart from that, it does
- seem to work.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 16 11:10:34 2008 +0200
- SPI Flash: Add "sf" command
- This adds a new command, "sf" which can be used to manipulate SPI
- flash. Currently, initialization, reading, writing and erasing is
- supported.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit d25ce7d24cc0f93881559f4009175ea305af65e8
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 16 11:10:33 2008 +0200
- SPI Flash subsystem
- This adds a new SPI flash subsystem.
- Currently, only AT45 DataFlash in non-power-of-two mode is supported,
- but some preliminary support for other flash types is in place as
- well.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 60445cb5c3eb77ed1a07f2d908eef09174483698
- Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- Date: Fri May 16 11:10:32 2008 +0200
- atmel_spi: Driver for the Atmel SPI controller
- This adds a driver for the SPI controller found on most AT91 and AVR32
- chips, implementing the new SPI API.
- Changed in v4:
- - Update to new API
- - Handle zero-length transfers appropriately. The user may send a
- zero-length SPI transfer with SPI_XFER_END set in order to
- deactivate the chip select after a series of transfers with chip
- select active. This is useful e.g. when polling the status
- register of DataFlash.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri May 16 11:10:31 2008 +0200
- SPI API improvements
- This patch gets rid of the spi_chipsel table and adds a handful of new
- functions that makes the SPI layer cleaner and more flexible.
- Instead of the spi_chipsel table, each board that wants to use SPI
- gets to implement three hooks:
- * spi_cs_activate(): Activates the chipselect for a given slave
- * spi_cs_deactivate(): Deactivates the chipselect for a given slave
- * spi_cs_is_valid(): Determines if the given bus/chipselect
- combination can be activated.
- Not all drivers may need those extra functions however. If that's the
- case, the board code may just leave them out (assuming they know what
- the driver needs) or rely on the linker to strip them out (assuming
- --gc-sections is being used.)
- To set up communication parameters for a given slave, the driver needs
- to call spi_setup_slave(). This returns a pointer to an opaque
- spi_slave struct which must be passed as a parameter to subsequent SPI
- calls. This struct can be freed by calling spi_free_slave(), but most
- driver probably don't want to do this.
- Before starting one or more SPI transfers, the driver must call
- spi_claim_bus() to gain exclusive access to the SPI bus and initialize
- the hardware. When all transfers are done, the driver must call
- spi_release_bus() to make the bus available to others, and possibly
- shut down the SPI controller hardware.
- spi_xfer() behaves mostly the same as before, but it now takes a
- spi_slave parameter instead of a spi_chipsel function pointer. It also
- got a new parameter, flags, which is used to specify chip select
- behaviour. This may be extended with other flags in the future.
- This patch has been build-tested on all powerpc and arm boards
- involved. I have not tested NIOS since I don't have a toolchain for it
- installed, so I expect some breakage there even though I've tried
- fixing up everything I could find by visual inspection.
- I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
- DataFlash drivers posted as a follow-up. I'd like some help testing
- other boards that use the existing SPI API.
- But most of all, I'd like some comments on the new API. Is this stuff
- usable for everyone? If not, why?
- Changed in v4:
- - Build fixes for various boards, drivers and commands
- - Provide common struct spi_slave definition that can be extended by
- drivers
- - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
- - Make default bus and mode build-time configurable
- - Override default SPI bus ID and mode on mx32ads and imx31_litekit.
- Changed in v3:
- - Add opaque struct spi_slave for controller-specific data associated
- with a slave.
- - Add spi_claim_bus() and spi_release_bus()
- - Add spi_free_slave()
- - spi_setup() is now called spi_setup_slave() and returns a
- struct spi_slave
- - soft_spi now supports four SPI modes (CPOL|CPHA)
- - Add bus parameter to spi_setup_slave()
- - Convert the new i.MX32 SPI driver
- - Convert the new MC13783 RTC driver
- Changed in v2:
- - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
- new API.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Tested-by: Guennadi Liakhovetski <lg@denx.de>
- commit 289011207d999b2e4085150d2aa30d547ad9b800
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 16 11:10:30 2008 +0200
- Move definition of container_of() to common.h
- AVR32 and AT91SAM9 both have their own identical definitions of
- container_of() taken from the Linux kernel. Move it to common.h so
- that all architectures can use it.
- container_of() is already used by some drivers, and will be used
- extensively by the new and improved SPI API.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 16 11:08:11 2008 +0200
- soft_i2c: Pull SDA high before reading
- Spotted by Dean Capindale.
- Systems that support open-drain GPIO properly are allowed provide an
- empty I2C_TRISTATE define. However, this means that we need to be
- careful not to drive SDA low when the slave is expected to respond.
- This patch adds a missing I2C_SDA(1) to read_byte() required to
- tristate the SDA line on systems that support open-drain GPIO.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2
- Author: Stefan Roese <sr@denx.de>
- Date: Mon May 19 11:34:53 2008 +0200
- ppc4xx: Remove implementations of testdram()
- This patch removes the used testdram() implementations of the board
- that are maintained by myself.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 17:37:28 2008 +0200
- ppc4xx: Remove superfluous dram_init() call or replace it by initdram()
- Historically the 405 U-Boot port had a dram_init() call in early init
- stage. This function was still called from start.S and most of the time
- coded in assembler. This is not needed anymore (since a long time) and
- boards should implement the common initdram() function in C instead.
- This patch now removed the dram_init() call from start.S and removes the
- empty implementations that are scattered through most of the 405 board
- ports. Some older board ports really implement this dram_init() though.
- These are:
- csb272
- csb472
- ERIC
- EXBITGEN
- W7OLMC
- W7OLMG
- I changed those boards to call this assembler dram_init() function now
- from their board specific initdram() instead. This *should* work, but please
- test again on those platforms. And it is perhaps a good idea that those
- boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
- some time. So further patches welcome here.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 17:22:11 2008 +0200
- ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 39b32be18cd33b53a84065edcd4e465165cc5564
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 17:20:03 2008 +0200
- ppc4xx: Fix common ECC generation code for 440GP style platforms
- This patch makes the common 4xx ECC code really usable on 440GP style
- platforms.
- Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
- compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
- we need to make some processor dependant defines used later on by the
- driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ec724f883ee3f3925e6c55027e8ffa70ada83303
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 17:13:55 2008 +0200
- ppc4xx: Change Kilauea to use the common DDR2 init function
- This patch changes the kilauea and kilauea_nand (for NAND booting)
- board port to not use a board specific DDR2 init routine anymore. Now
- the common code from cpu/ppc4xx is used.
- Thanks to Grant Erickson for all his basic work on this 405EX early
- bootup.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 14:59:21 2008 +0200
- ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2
- This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
- ppc4xx related SDRAM/DDR/DDR2 controller defines.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 14:57:41 2008 +0200
- ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1
- This patch removes all SDRAM related defines from the PPC4xx headers
- ppc405.h and ppc440.h. This is needed since now some 405 PPC's use
- the same SDRAM controller as 440 systems do (like 405EX and 440SP).
- It also introduces new defines for the equipped SDRAM controller based on
- which PPC variant is used. There new defines are:
- used on 405GR/CR/EP and some Xilinx Virtex boards.
- used on 440GP/GX/EP/GR.
- used on 440EPx/GRx.
- used on 405EX/r/440SP/SPe/460EX/GT.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 2 14:35:44 2008 +0200
- ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
- This patch consolidates the 405 and 440 parts of the NAND booting code
- selected via CONFIG_NAND_SPL. Now common code is used to initialize the
- SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc.
- Only *after* running from this location, nand_boot() is called.
- Please note that the initsdram() call is now moved from nand_boot.c
- to start.S. I experienced problems with some boards like Kilauea
- (405EX), which don't have internal SRAM (OCM) and relocation needs to
- be done to SDRAM before the NAND controller can get accessed. When
- initdram() is called later on in nand_boot(), this can lead to problems
- with variables in the bss sections like nand_ecc_pos[].
- Signed-off-by: Stefan Roese <sr@denx.de>
- Acked-by: Scott Wood <scottwood@freescale.com>
- commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Thu May 22 14:44:24 2008 -0700
- ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
- This patch (Part 2 of 2):
- * Rolls up a suite of changes to enable correct primordial stack and
- global data handling when the data cache is used for such a purpose
- for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
- * Related to the first, unifies DDR2 SDRAM and ECC initialization by
- eliminating redundant ECC initialization implementations and moving
- redundant SDRAM initialization out of board code into shared 4xx
- code.
- * Enables MCSR visibility on the 405EX(r).
- * Enables the use of the data cache for initial RAM on
- both AMCC's Kilauea and Makalu and removes a redundant
- CFG_POST_MEMORY flag from each board's CONFIG_POST value.
- - Removed, per Stefan Roese's request, defunct memory.c file for
- Makalu and rolled sdram_init from it into makalu.c.
- With respect to the 4xx DDR initialization and ECC unification, there
- is certainly more work that can and should be done (file renaming,
- etc.). However, that can be handled at a later date on a second or
- third pass. As it stands, this patch moves things forward in an
- incremental yet positive way for those platforms that utilize this
- code and the features associated with it.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c821b5f120bedf73867513466412587c6912a8f8
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Thu May 22 14:44:14 2008 -0700
- ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
- This patch (Part 1 of 2):
- * Rolls up a suite of changes to enable correct primordial stack and
- global data handling when the data cache is used for such a purpose
- for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
- * Related to the first, unifies DDR2 SDRAM and ECC initialization by
- eliminating redundant ECC initialization implementations and moving
- redundant SDRAM initialization out of board code into shared 4xx
- code.
- * Enables MCSR visibility on the 405EX(r).
- * Enables the use of the data cache for initial RAM on
- both AMCC's Kilauea and Makalu and removes a redundant
- CFG_POST_MEMORY flag from each board's CONFIG_POST value.
- - Removed, per Stefan Roese's request, defunct memory.c file for
- Makalu and rolled sdram_init from it into makalu.c.
- With respect to the 4xx DDR initialization and ECC unification, there
- is certainly more work that can and should be done (file renaming,
- etc.). However, that can be handled at a later date on a second or
- third pass. As it stands, this patch moves things forward in an
- incremental yet positive way for those platforms that utilize this
- code and the features associated with it.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a439680019e06171d4a5694b7992accce87f590e
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Wed May 21 13:28:30 2008 -0700
- PPC4xx: Simplified post_word_{load, store}
- This patch simplifies post_word_{load,store} by using the preprocessor
- to eliminate redundant, copy-and-pasted code.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- commit f979690ee337450b2030aba128f95b7a8d9881c0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu May 15 15:13:08 2008 -0500
- Fix warnings from gcc-4.3.0 build on a ppc host
- * The cfi_flash.c memset fix actual allows the board to boot so there is
- a bit more going on here than just resolving warnings associated with
- uninitialized variables.
- * include/asm/bitops.h:302: warning: '__swab32p' is static but used in
- inline function 'ext2_find_next_zero_bit' which is not static
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed May 14 13:09:51 2008 -0500
- MPC512x: Change traps.c to not reference non-addressable memory
- Currently, END_OF_RAM is used by the trap code to determine if
- we should attempt to access the stack pointer or not. However,
- on systems with a lot of RAM, only a subset of the RAM is
- guaranteed to be mapped in and accessible. Change END_OF_RAM
- to use get_effective_memsize() instead of using the raw ram
- size out of the bd.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 81673e9ae14b771cd13faf19947192599cae3959
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue May 13 19:01:54 2008 -0500
- Make sure common.h is the first include.
- If common.h isn't first we can get CONFIG_ options defined in the
- board config file ignored. This can cause an issue if any of those
- config options impact the size of types of data structures
- (eg CONFIG_PHYS_64BIT).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue May 13 15:53:29 2008 +0200
- Avoid initrd and logbuffer area overlaps
- Add logbuffer to reserved LMB areas to prevent initrd allocation
- from overlaping with it.
- Make sure to use correct logbuffer base address.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 6956d53d9934862507f83f0e3255dfd4662e7482
- Author: Sascha Laue <sascha.laue@liebherr.com>
- Date: Tue May 13 13:29:54 2008 +0200
- lwmon5: add memory-pattern-test to FPGA POST.
- commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Thu May 8 19:02:51 2008 -0500
- PPC: 86xx Add bat registers to reginfo command
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Fri May 9 15:41:35 2008 -0500
- PPC: Add print_bats() to lib_ppc/bat_rw.c
- This function prints the values of all the BAT register
- pairs - I needed this for debug earlier this week; adding it to
- lib_ppc so others can use it (and add it to reginfo commands
- if so desired).
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit c148f24c15743a02e855636e6bed013bd121f7f2
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Thu May 15 21:29:04 2008 -0500
- PPC: Change lib_ppc/bat_rw.c to use high bats
- Currently, this code only deals with BATs 0-3, which makes
- it useless on systems that support BATs 4-7. Add the
- support for these registers.
- Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>
- commit 31d826722434931e1152a09d140187dcf72f8aac
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Thu May 8 19:02:12 2008 -0500
- PPC: Create and use CONFIG_HIGH_BATS
- Change all code that conditionally operates on high bat
- registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
- instead of the myriad ways this is done now. Define the option
- for every config for which high bats are supported (and
- enabled by early boot, on parts where they're not always
- enabled)
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit aa3b8bf9c30065bb2ea852799d32db5020598495
- Author: Wolfgang Grandegger <wg@grandegger.com>
- Date: Wed May 28 19:55:19 2008 +0200
- E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit ff36fbb2e7583fb808eef773f511489c7a9c2df3
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed May 28 13:06:25 2008 -0500
- ColdFire: Add 10 base ethernet support for mcf5445x
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba
- Author: Jason McMullan <mcmullan@netapp.com>
- Date: Fri May 30 00:53:38 2008 +0900
- mips: Add an 'include/asm/errno.h', like all other architectures
- All other u-boot architectures have an include/asm/errno.h, so
- this change adds it to the mips include/asm-mips headers also.
- Stolen from Linux 2.6.25.
- Signed-off-by: Jason McMullan <mcmullan@netapp.com>
- commit e2ad8426624bac457acc6925b6ff408e9bf20466
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Fri May 30 00:53:38 2008 +0900
- [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Fri May 30 00:53:38 2008 +0900
- [MIPS] <asm/mipsregs.h>: Update register / bit field definitions
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit bf462ae450a7f2eeeddc699ed345b391e3263540
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Fri May 30 00:53:37 2008 +0900
- [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups
- No functional changes.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 89a1550ec6b74452274a7a23127936e2c7eec711
- Author: Jason McMullan <mcmullan@netapp.com>
- Date: Fri May 30 00:53:37 2008 +0900
- mips: If CONFIG_CMD_SPI is defined, call spi_init()
- The mips architecture currently does not call 'spi_init()' in the generic
- board initialization routine is CONFIG_CMD_SPI is defined.
- This patch rectifies that problem.
- Signed-off-by: Jason McMullan <mcmullan@netapp.com>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3
- Author: Jason McMullan <mcmullan@netapp.com>
- Date: Fri May 30 00:53:37 2008 +0900
- [MIPS] lib_mips/board.c: Add nand_init
- This patch adds the standard 'nand_init()' call to the mips generic
- 'board_init_r()' call, bringing MIPS in line with the other architectures.
- Signed-off-by: Jason McMullan <mcmullan@netapp.com>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit d6ac2ed893c2168738aee01579d6283af8d37045
- Author: Scott Wood <scottwood@freescale.com>
- Date: Thu May 22 10:49:46 2008 -0500
- Remove prototypes of nand_init() in favor of including nand.h.
- Likewise with onenand_init().
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 229c56f07a82eacda8c8720cb146fc9be0f6db54
- Author: Scott Wood <scottwood@freescale.com>
- Date: Thu May 22 10:49:00 2008 -0500
- Make onenand_uboot.h self-sufficient.
- Don't assume types are provided by previously included headers.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 9723bbb46abb7b2ca24eead5114a3faa58060c20
- Author: Dirk Behme <dirk.behme@gmail.com>
- Date: Wed Jan 16 14:26:59 2008 +0100
- nand: Correct NAND erase percentage output
- For NAND erase sizes smaller than one NAND erase block, erase
- percentage output becomes grater than 100% e.g.
- -- cut --
- > nand info
- Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB
- > nand erase 0x100000 0x2000
- NAND erase: device 0 offset 0x100000, size 0x2000
- Erasing at 0x100000 -- 200% complete.
- OK
- >
- -- cut --
- Correct this and give user a warning that more is erased than specified:
- -- cut --
- > nand erase 0x100000 0x2000
- NAND erase: device 0 offset 0x100000, size 0x2000
- Warning: Erase size 0x00002000 smaller than one erase block 0x00004000
- Erasing 0x00004000 instead
- Erasing at 0x100000 -- 100% complete.
- OK
- >
- -- cut --
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit 5922db6c0948506be91e0de44e7a6863a18a417f
- Author: Stelian Pop <stelian@popies.net>
- Date: Tue May 13 17:31:24 2008 +0200
- Cleanup nand_info[] declaration.
- The nand_info array is declared as extern in several .c files.
- Those days, nand.h contains a reference to the array, so there is
- no need to declare it elsewhere.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 135f0a7488af2947adbe4b40b79280bdfe5e9886
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon May 19 09:30:43 2008 -0500
- NAND: Provide a sane default for NAND_MAX_CHIPS.
- This allows the header to be included regardless of whether a board's
- config file provides NAND-related defininitions.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit a8092c021d27f27f4b323b7d49979ca01b3fc19d
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Mon May 26 12:19:10 2008 +0200
- avr32: Fix theoretical race in udelay()
- If the specified delay is very short, the cycle counter may go past the
- "end" time we are waiting for before we get around to reading it.
- Fix it by checking the different between the cycle count "now" and the
- cycle count at the beginning. This will work as long as the delay
- measured in number of cycles is below 2^31.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 48ea623eae8674793372e3e7c95e72e5a44d7a95
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed May 21 13:01:09 2008 +0200
- avr32: Compile atmel_mci.o conditionally
- Remove #ifdef CONFIG_MMC from the source file and use conditional
- compilation in the Makefile instead.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu May 22 12:28:25 2008 +0200
- avr32: Fix wrong error flags in atmel_mci driver
- Make sure we check for CRC errors when sending commands that use CRC
- checking.
- Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed May 21 11:10:59 2008 +0200
- avr32: Fix two warnings in atmel_mci.c
- The warnings are harmless but annoying. Let's fix them.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit a23e277c4a3a2bbc42d237aae29da3a8971e757f
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Mon May 19 11:36:28 2008 +0200
- avr32: Rework SDRAM initialization code
- This cleans up the SDRAM initialization and related code a bit, and
- allows faster booting.
- * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
- * Remove memory test from sdram_init() and make caller responsible
- for verifying the SDRAM and determining its size.
- * Remove base_address member from struct sdram_config (was sdram_info)
- * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
- * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 95107b7c028806919630bf02c653aa8f4f867c94
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Mon May 19 11:27:37 2008 +0200
- avr32: Do stricter stack checking in the exception handler
- Don't do a stack dump if the stack pointer is outside the memory area
- reserved for stack.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit caf83ea888a0220f41747d0b7748fa43b4a4bd49
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 2 15:32:57 2008 +0200
- avr32: Use the same entry point for reset and exception handling
- Since the reset vector is always aligned to a very large boundary, we
- can save a couple of KB worth of alignment padding by placing the
- exception vectors at the same address.
- Deciding which one it is is easy: If we're handling an exception, the
- CPU is in Exception mode. If we're starting up after reset, the CPU is
- in Supervisor mode. So this adds a very minimal overhead to the reset
- path (only executed once) and the exception handling path (normally
- never executed at all.)
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 0c16eed2189a190bd5655b33c029f809a9b31128
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 2 15:24:22 2008 +0200
- avr32: Put memset in its own section
- All C code is compiled with -ffunction-sections -fdata-sections.
- Assembly functions should get their own sections as well so that
- everything looks consistent.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Fri May 2 15:21:40 2008 +0200
- avr32: Rename pm_init() as clk_init() and make SoC-specific
- pm_init() was always more about clock initialization than anything
- else. Dealing with PLLs, clock gating and such is also inherently
- SoC-specific, so move it into a SoC-specific directory.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 4f5972c3b2454c22957f2842cfe64ec8118e015b
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Apr 30 16:15:57 2008 +0200
- avr32: Use new-style Makefile for the at32ap platform
- This makes it easier to avoid compiling certain files later.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Apr 30 14:36:47 2008 +0200
- avr32: Remove unused file cpu/at32ap/pm.c
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Apr 30 14:19:28 2008 +0200
- avr32: Clean up the HMATRIX code
- Rework the HMATRIX configuration interface so that it becomes easier
- to configure the HMATRIX for boards with special needs, and add new
- parts.
- The HMATRIX header file has been split into a general,
- chip-independent part with register definitions, etc. and a
- chip-specific part with SFR bitfield definitions and master/slave
- identifiers.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 0a2e48792dd372c90b80059f3235e67a567e16fc
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu Nov 22 12:14:11 2007 +0100
- avr32: Add support for the ATSTK1006 board
- This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
- board. It's currently in production and will be available soon.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Tue Apr 29 12:53:05 2008 +0200
- avr32: Get rid of the .flashprog section
- The .flashprog section was only needed back when we were running
- directly from flash, and it's even more useless on NGW100 since it
- uses the CFI flash driver which never used this workaround in the
- first place.
- Remove it on STK1000 as well, and get rid of all the associated code and
- annotations.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit cdd42c0c7a5205fc380912d83229069a71ea3abf
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Wed Apr 30 13:09:56 2008 +0200
- avr32: Use correct condition around macb clock accessors
- get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
- the chip has a MACB controller, not when it has a USART.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit f793a3581901ff39c2abb94012d9bbc8573ccf02
- Author: David Brownell <david-b@pacbell.net>
- Date: Wed Apr 16 22:57:58 2008 -0700
- avr32: Disable the AP7000 internal watchdog on startup
- This patch forces the watchdog off in all cases. That will at least
- get rid of the constant reboot cycle, though it won't let the watchdog
- actually run in the new kernels: its probe() comes up with a polite
- warning.
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 55ac7a7490b55da56659f95d82a0c83b9756df27
- Author: David Brownell <david-b@pacbell.net>
- Date: Fri Feb 22 12:54:39 2008 -0800
- avr32: stk1002 and ngw100 convergence
- Make STK1002 and NGW100 boards act more alike:
- - STK boards can use as many arguments as NGW
- - STK boards don't need to manage FPGAs either
- - NGW commands should match STK ones
- Also spell U-Boot right in prompts for STK1002 and NGW100.
- Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
- [haavard.skinnemoen@atmel.com: update STK100[34] as well]
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Tue May 27 13:47:00 2008 +0200
- Socrates: Fix PCI bus frequency report
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 791e1dba8de76ad8e762a7badb869f224a1f8b82
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Tue May 27 11:49:13 2008 +0200
- Socrates: Added USB support.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 5a904e5637cff1d708dc67098004f83ba9e84c54
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Tue May 27 11:35:02 2008 +0200
- USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO
- In case of several PCI USB controllers on a board this variable
- specifys which controller to use.
- See doc/README.generic_usb_ohci for details.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 2f7468aeba60e1288030a8d007c4e63bd3f13221
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Tue May 27 10:36:07 2008 +0200
- Socrates: add support for DS75 Digital Thermo Sensor on I2C bus.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 83e9d7a2614d4006b92690afa3390c291734267e
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Mon May 26 18:16:04 2008 +0200
- Socrates: Config file cleanup.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 602cac1389b755b223272f2328a47e6f8c240848
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat May 24 12:47:46 2008 +0200
- MAKEALL: add at91 list
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0
- Author: Ron Madrid <ron_madrid@sbcglobal.net>
- Date: Fri May 23 15:37:05 2008 -0700
- Add Marvell 88E1118 support for TSEC
- Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 557b377d8bfc8b833b6e749457bcdfa298331a24
- Author: Jens Gehrlein <sew_s@tqs.de>
- Date: Mon May 5 14:06:11 2008 +0200
- smc911x: add 16 bit support
- Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb
- Author: Christian Eggers <ceggers@gmx.de>
- Date: Wed May 21 21:29:10 2008 +0200
- Fix endianess conversion in usb_ohci.c
- Sorry, I forgot this line:
- Signed-off-by: Christian Eggers <ceggers@gmx.de>
- I think this must be swapped (result may be equal).
- commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
- Author: Christian Eggers <ceggers@gmx.de>
- Date: Wed May 21 22:12:00 2008 +0200
- USB: replace old swap_ with proper endianess conversion macros
- Signed-off-by: Christian Eggers <ceggers@gmx.de>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c
- Author: Christian Eggers <ceggers@gmx.de>
- Date: Wed May 21 21:29:10 2008 +0200
- Fix endianess conversion in usb_ohci.c
- Signed-off-by: Christian Eggers <ceggers@gmx.de>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 477434c63c2ea5baa5c6c4e43500786f436511ff
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Thu May 22 01:15:53 2008 +0200
- USB: add support for multiple PCI OHCI controllers
- Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
- In case of several PCI USB controllers on a board this variable
- specifys which controller to use.
- Also add USB support for sokrates board.
- See doc/README.generic_usb_ohci for details.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 21 16:56:08 2008 +0200
- Fix some whitespace issues
- introduced by 53677ef18 "Big white-space cleanup."
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4416603aeb06861b468b06a981e52c3ff805db7b
- Author: York Sun <yorksun@freescale.com>
- Date: Mon May 12 14:36:39 2008 -0500
- Make ads5121 out-of-tree compiling safe
- Reuse the existing DIU driver in board/freescale/common.
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit 0e1bad47cd345c76c91a64caf41011e431b62599
- Author: York Sun <yorksun@freescale.com>
- Date: Mon May 5 10:20:01 2008 -0500
- Adding DIU support for Freescale 5121ADS
- Add DIU and cfb console support to FSL 5121ADS board.
- Use #define CONFIG_VIDEO in config file to enable fb console.
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit a48ff68d235e671176f6b496c44246dbe5e0a93f
- Author: York Sun <yorksun@freescale.com>
- Date: Mon May 5 10:20:00 2008 -0500
- Replace DPRINTF with debug
- Remove DPRINTF macro and replace it with generic debug macro.
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d
- Author: York Sun <yorksun@freescale.com>
- Date: Mon May 5 10:19:59 2008 -0500
- Move pixel clock setting to board file
- The clock divider has different format in 5121 and 8610. This patch moves it to
- board specific code.
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit 53677ef18e25c97ac613349087c5cb33ae5a2741
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue May 20 16:00:29 2008 +0200
- Big white-space cleanup.
- This commit gets rid of a huge amount of silly white-space issues.
- Especially, all sequences of SPACEs followed by TAB characters get
- removed (unless they appear in print statements).
- Also remove all embedded "vim:" and "vi:" statements which hide
- indentation problems.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Thu May 8 17:46:23 2008 +0200
- socrates: fix second TSEC configuration (it is actually TSEC3)
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Thu May 8 14:17:08 2008 +0200
- Fixed reset for socrates
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit e18575d5f589a62e19c70d471d4b4e27cad3af56
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Wed May 7 15:10:49 2008 +0200
- socrates: changes to support FDT
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Wed Apr 30 11:42:50 2008 +0200
- Initial support for "Socrates" board
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:46:42 2008 +0200
- POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.
- This way we become able to utilize the full post_log_word for POST
- activities (overwise, POST ECC, which has 0x8000 ID, could be
- erroneously treated as started in post_output_backlog() even if there
- was actually no POST ECC run (because of OCM POST failure, for
- example).
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 7845d49094c81321021b50a4dbb8864d2f3777e4
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:46:02 2008 +0200
- POST: mark OCM test as POST_STOP
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- commit 28a385065882d6cb6ac5f443311ff87887ed7c13
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:45:26 2008 +0200
- POST: add POST_STOP flag
- Don't run futher tests in case of a test fails that is marked as
- POST_STOP.
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit a525145d8110d15b4389d23c3ea8a78f22509d3f
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:44:16 2008 +0200
- POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround)
- Switch the OCM testid with the codec one. The reason is that current
- implementation requires the POST_ROM testid to fit into lower 16
- bits, and the codec test will never run with POST_ROM hopefully.
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:43:28 2008 +0200
- lwmon5: enable OCM post test on lwmon5 board
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- commit 6e8ec682268493b8d098f99e17b1ce71b4448977
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:42:47 2008 +0200
- POST: OCM test added.
- Added OCM test to POST layer. This version runs before all other tests
- but doesn't yet interrupt post sequence on failure.
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 6891260bdd935a382c95d9fa333922b0dfded68a
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu May 8 15:40:39 2008 +0200
- POST: typo fix
- Signed-off-by: Ilya Yanok <yanok@emcraft.com>
- commit 727f63334676e760877d43bfb8f0e9331ac8b101
- Author: Hebbar <gururajakr@sanyo.co.in>
- Date: Tue May 20 02:16:36 2008 -0700
- common/usb.c: fix incorrect escape sequence
- Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa
- Author: York Sun <yorksun@freescale.com>
- Date: Thu May 15 15:26:27 2008 -0500
- Fix 8313ERDB board configuration
- Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
- Correct TSEC1 vs TSEC2 assignment.
- Define ETHADDR and ETH1ADDR always.
- Signed-off-by: York Sun <yorksun@freescale.com>
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 2c289e320dcfb3760e99cf1d765cb067194a1202
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon May 19 09:47:25 2008 -0500
- mpc86xx: Removed unused and unconfigured memory test code.
- Besides, other common code exists.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 180a90abdae72587c0f679edf8991455e559440d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 19 12:47:11 2008 +0200
- Release v1.3.3
- Update CHANGELOG for release.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 16bedc661de0dae767b1377d8413373a3fbcfa79
- Author: Stefan Roese <sr@denx.de>
- Date: Mon May 19 07:14:38 2008 +0200
- ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
- When SATA is selected (via jumper J6) we need to disable the first PCIe
- node in the device tree, so that Linux doesn't initialize it. Otherwise
- the Linux SATA driver will fail to detect the devices.
- The same goes the other way around too. So if PCIe is selected we need
- to disable the SATA node in the device tree.
- This is because PCIe port 0 and SATA on 460EX share the same pins
- (multiplexed) and we have to configure in U-Boot which peripheral is
- enabled.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3cc27b426aeefe2930f911692e9df3143fb2565f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:58 2008 +0200
- i386: Fix multiple definitions of __show_boot_progress
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 311f3446930c1e64c12026c1cfd00500b05be52d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:57 2008 +0200
- sc530_spunk: add missing SOBJS entry
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a559317143b4f95927b08cd388707e6f077e95fa
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:56 2008 +0200
- sc520_spunk: Fix flash
- flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
- flash.c:398: error: label at end of compound statement
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 91f221317af64191ee8caf303ea9305943158691
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:49 2008 +0200
- drivers/pcmcia: add missing i82365
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit dd223944132f97ffa52977ea95e5a52428f5cc2f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:47 2008 +0200
- i386/bootm: remove unused var
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 18 19:09:45 2008 +0200
- example/gitignore: update with all generated examples
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a38dc3ea8614f8b0c41e432b445a9959b9711295
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu May 15 00:42:45 2008 +0200
- TQM8272: fix out-of-tree building
- ...and add to MAKEALL script
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 14 23:34:53 2008 +0200
- environment: fix bug introduced by commit a8409f4f1ac8
- env_get_char is not a function, but a pointer to one.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf
- Author: Gary Jennejohn <garyj@denx.de>
- Date: Wed May 14 13:39:22 2008 +0200
- ppc4xx: QUAD100HD: Allow the environment to be put into flash.
- After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also
- use a redundant environment.
- Signed-off-by: Gary Jennejohn <garyj@denx.de>
- commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 14 13:55:30 2008 +0200
- Fix config files for out-of-tree building
- Several board/<...>/config.mk files include dynamically built (by
- the Makefile) config files but used the wrong file name of
- $(TOPDIR)/board/$(BOARDDIR)/config.tmp
- instead if the correct
- $(OBJTREE)/board/$(BOARDDIR)/config.tmp
- The bug is nasty because the build result is correct for the (normal)
- in-tree builds, and because 'sinclude' is used no errors get raised
- even for out-of-tree build tests. But out-of-tree builds use an
- incomplete and thus usually incorrect configuration...
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
- Author: Stefan Roese <sr@denx.de>
- Date: Wed May 14 13:40:03 2008 +0200
- ppc4xx: Fix bogus Canyonlands config.mk
- This patch fixes the canyonlands config.mk file to enable correct
- out-of-tree builds. Thanks to Wolfgang Denk for spotting this.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fdd1247a66d788a3446244f6fde9955a93c26322
- Author: Stefan Roese <sr@denx.de>
- Date: Wed May 14 10:32:32 2008 +0200
- ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
- Canyonlands has a file ddr2_fixed.c which needs special treatment when
- building in separate directory. It has to be linked to build directory
- otherwise it is not seen.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a8409f4f1ac84c36273c1a1e341189662521bcfb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 14 12:22:49 2008 +0200
- environment: cleanup prototype declarations of env functions.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cf39b07948015c480b72a6e732cf7d839aa93a9e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 14 12:21:48 2008 +0200
- linkstation_HGLAN: Fix out of tree building.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 085551c05ca09e6c491ea11a1c6727a36776a545
- Author: Stefan Roese <sr@denx.de>
- Date: Wed May 14 10:32:32 2008 +0200
- ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
- Canyonlands has a file ddr2_fixed.c which needs special treatment when
- building in separate directory. It has to be linked to build directory
- otherwise it is not seen.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1510b82d50615f344e89d42533e8224cce067dc0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue May 13 23:15:52 2008 +0200
- Makefile: fix "error: version_autogenerated.h: No such file or directory"
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4
- Author: Stelian Pop <stelian@popies.net>
- Date: Tue May 13 17:31:24 2008 +0200
- Cleanup nand_info[] declaration.
- The nand_info array is declared as extern in several .c files.
- Those days, nand.h contains a reference to the array, so there is
- no need to declare it elsewhere.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 70fab1908fc1734a403711eaabbef546bc4b77dc
- Author: Stefan Roese <sr@denx.de>
- Date: Tue May 13 20:22:01 2008 +0200
- ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 12 01:11:21 2008 +0200
- Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
- This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
- which broke many PowerPC boards.
- commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 12 00:56:28 2008 +0200
- Revert "Avoid initrd and logbuffer area overlaps"
- This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
- which breaks building on all PPC boards that don't use a log buffer.
- commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Sat May 10 14:02:04 2008 -0700
- Fix offset calculation for multi-type legacy images.
- Calculation of tail was incorrect when size % 4 == 0.
- New code removes the conditional and does the same thing but with arithmetic
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 12 00:40:58 2008 +0200
- Revert "Change env_get_char from a global function ptr to a function."
- This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
- which is known to break booting from dataflash and NAND.
- commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 11 23:13:57 2008 +0200
- API: remove duplicate syscall check
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 67e3beb52c320b0a31cf030716c99392cde2d532
- Author: Stelian Pop <stelian@popies.net>
- Date: Fri May 9 21:46:51 2008 +0200
- AT91: Cleanup unused config header file definitions.
- CONFIG_ENV_OVERWRITE is commented out in the config header files,
- so let's cleanup the files by removing the whole definition.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 19883aede2ac0a522493bfb2b35a7dbb200071b1
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 14:52:34 2008 +0200
- Support AT91CAP9 revC CPUs
- The AT91CAP9 revC CPU has a few differences over the previous,
- revB CPU which was distributed in small quantities only (revA was
- an internal Atmel product only).
- The revC silicon needs a special initialisation sequence to
- switch from the internal (imprecise) RC oscillator to the
- external 32k clock.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 098b7b4b441b12c2a64dd517930f43c793542759
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 14:52:33 2008 +0200
- Use custom logo for Atmel boards
- This patch adds a custom vendor logo for the Atmel AT91 boards.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 761c70b80cdd3bead40146b96a8e713d6ae01632
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 14:52:32 2008 +0200
- AT91SAM9RLEK: hook up the ATMEL LCD driver
- This patch makes the necessary adaptations (PIO configurations and
- defines in config header file) to hook up the Atmel LCD driver to the
- AT91SAM9RLEK board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 14:52:31 2008 +0200
- AT91SAM9263EK: hook up the ATMEL LCD driver
- This patch makes the necessary adaptations (PIO configurations and
- defines in config header file) to hook up the Atmel LCD driver to the
- AT91SAM9263EK board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 820f2a958325061a446115f3035e48e4726b3390
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 14:52:30 2008 +0200
- AT91SAM9261EK: hook up the ATMEL LCD driver
- This patch makes the necessary adaptations (PIO configurations and
- defines in config header file) to hook up the Atmel LCD driver to the
- AT91SAM9261EK board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c139b17d20c8371c1e0a8d7fb27c11050cf86304
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 14:52:29 2008 +0200
- AT91CAP9ADK: hook up the ATMEL LCD driver
- This patch makes the necessary adaptations (PIO configurations and
- defines in config header file) to hook up the Atmel LCD driver to the
- AT91CAP9ADK board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 39cf480484fcce5c04a590ee1c30be0c17b02c34
- Author: Stelian Pop <stelian@popies.net>
- Date: Fri May 9 21:57:18 2008 +0200
- Add ATMEL LCD driver
- This patch adds support for the ATMEL LCDC driver which is used on some
- AT91 and AVR platforms.
- Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
- AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2118ebb44dc40f8117c94950fd95799a9ef821b2
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 18:52:25 2008 +0200
- AT91SAM9RLEK support
- This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
- board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8e429b3eee23927c1222679f6b6f53667b21595c
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 18:52:23 2008 +0200
- AT91SAM9263EK support
- This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
- board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d99a8ff66d8ae87e5c87590ed2e4ead629540607
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:22 2008 +0200
- AT91SAM9261EK support
- This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
- board.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 86c8c8a414988c50104a3b02c29f50af2be738c0
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:21 2008 +0200
- AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
- This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
- in order to cope with the changes in DataFlash partitionning scheme
- (cset c3a60cb3).
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 96996ac25d5222611a8888968db6e53a6d3726da
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:20 2008 +0200
- AT91SAM9260EK: Normalize BOOTARGS
- This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
- DataFlash or from NAND), and gives to Linux a fully specified mtdparts
- variable.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:19 2008 +0200
- AT91SAM9260EK: Normalize SPI timings
- This patch changes the SPI timings to closely match the ones
- used by the Linux kernel and the Atmel's own bootstrap project.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:18 2008 +0200
- AT91SAM9260EK: Handle 8 or 16 bit NAND
- The Atmel boards can handle 8 or 16 bit NAND memories. This patch
- makes the support configurable in the board config header file
- (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit ab52640fc01624e208424e527af0b7b3a5a65a12
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:17 2008 +0200
- AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
- This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
- in order to cope with the changes in DataFlash partitionning scheme
- (cset c3a60cb3).
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:16 2008 +0200
- AT91CAP9ADK: Normalize BOOTARGS
- This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
- DataFlash or from NAND), and gives to Linux a fully specified mtdparts
- variable.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 93da48b910511911ce110656e17ed733c8ac4c45
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:15 2008 +0200
- AT91CAP9ADK: Normalize SPI timings
- This patch changes the SPI timings to closely match the ones
- used by the Linux kernel and the Atmel's own bootstrap project.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:14 2008 +0200
- AT91CAP9ADK: Handle 8 or 16 bit NAND
- The Atmel boards can handle 8 or 16 bit NAND memories. This patch
- makes the support configurable in the board config header file
- (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 11b162bae058e96c7929e358d4adff2bee6c2cc4
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:13 2008 +0200
- Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms
- All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
- below avoids the duplication of u-boot.lds by putting the file in the
- cpu directory instead of the board one.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:12 2008 +0200
- Add proper copyright notices in Atmel boards Makefiles
- The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
- copyright notice. This patch adds the missing pieces.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit e817a042cef6164bf26fee86f90326f2ec9e6745
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:11 2008 +0200
- Add copyright information in Atmel boards partition.c
- When Ulf did the dataflash.c cleanup, he didn't add his copyright on
- the new created files. This patch fixes the problem.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 20:52:10 2008 +0200
- Update origin and copyright information in arch-at91sam9 header files
- When doing the AT91CAP9/AT91SAM9 port, a number of header files were
- copied from the Linux kernel sources. This patch explicitly specifies
- this origin for all the copied headers, and for those missing copyright
- information, adds it.
- Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
- in the latest kernel sources by 'at91sam9_smc.h'.
- The copyright information has been confirmed by the AT91 Linux kernel
- maintainer, Andrew Victor <avictor.za@gmail.com>.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 79dd1712689d6a5031d7cbff54957049680751c7
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Thu May 8 16:00:55 2008 +0200
- ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config
- When using dhcp/bootp the "netmask" environment variable is not set
- because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
- desireable, so the following patch adds this this option to the board
- config.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 869d14b4cc2e47de2ddcb117bad0407a44436684
- Author: Stefan Roese <sr@denx.de>
- Date: Sat May 10 10:30:36 2008 +0200
- ppc4xx: Update Makalu defconfig to use device-tree booting as default
- This patch reworks the default environment on Makalu. Now "net_nfs" for
- example uses the device-tree style booting formerly know as "net_nfs_fdt".
- Also the addresses in RAM were changed because of the new image booting
- support, which check for image overwriting. So the addresses needed to
- get adjusted.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f3612a7b199cab3942f60d9c1392eb39d58cc699
- Author: Becky Bruce <bgill@freescale.com>
- Date: Wed May 7 13:28:16 2008 -0500
- PPC: fix map_physmem build warning
- map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
- enabled. This quiets the warning.
- Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
- commit 36f32675f40292002ee1fed252c180a43022d2d4
- Author: Becky Bruce <bgill@freescale.com>
- Date: Wed May 7 13:24:57 2008 -0500
- Update pci code to use phys_addr_t
- Physical addrs need to be represented by phys_addr_t, not
- unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT
- are going to fail mightily.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Thu May 8 22:32:22 2008 -0700
- Support legacy multi-type images without FDT section.
- This patch enables legacy multi-type images containing only a Linux kernel
- and root file system to be loaded, maintaining compatibility with previous
- versions of u-boot.
- This is required when using old image files such as a Linux 2.4 kernel /
- filesystem.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 881031d9732783b7aeae2198fc7eb480ae8974a6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 10 00:38:02 2008 +0200
- Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 10 00:36:09 2008 +0200
- post/cpu/ppc4xx/Makefile: line length cleanup
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 22:52:09 2008 +0200
- Fix @ -> <at> substitution
- When applying the AT91CAP9 patches upstream, something transformed
- the '@' character into the ' <at> ' sequence.
- The patch below restores the original form in all the places where
- it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
- were copied from AT91CAP9, and a couple of other files where the
- ' <at> ' sequence was present).
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 22:52:10 2008 +0200
- Update origin and copyright information in arch-at91sam9 header files
- When doing the AT91CAP9/AT91SAM9 port, a number of header files were
- copied from the Linux kernel sources. This patch explicitly specifies
- this origin for all the copied headers, and for those missing copyright
- information, adds it.
- Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
- in the latest kernel sources by 'at91sam9_smc.h'.
- The copyright information has been confirmed by the AT91 Linux kernel
- maintainer, Andrew Victor <avictor.za@gmail.com>.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 22:52:11 2008 +0200
- Add copyright information in Atmel boards partition.c
- When Ulf did the dataflash.c cleanup, he didn't add his copyright on
- the new created files. This patch fixes the problem.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu May 8 10:09:27 2008 +0200
- mx31ads: fix 32kHz clock handling
- According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
- oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
- Also fix a typo when verifying a jumper configuration. While at it, make
- two needlessly global functions static.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed May 7 13:10:04 2008 +0200
- Avoid initrd and logbuffer area overlaps
- Add logbuffer to reserved LMB areas to prevent initrd allocation
- from overlaping with it.
- Make sure to use correct logbuffer base address.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed May 7 13:08:54 2008 +0200
- ppc: Cleanup get_effective_memsize() use
- Removed duplicated effective memory size calculation code.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 273c37d843d5b581090378016cd12dd9c586907b
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed May 7 09:03:53 2008 +0200
- Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled
- Recent modifcations to LOGBUFFER handling code were incorrecly
- introduced to fit_check_kernel() routine during
- "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
- commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.
- This patch cleans up this merge issue.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit bc11756daff89a3de09ca80adac962b88cf06e6e
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Tue May 6 20:16:15 2008 -0700
- Propagate Error Status to the Shell on fw_printenv Errors
- Changed implementation such that fw_printenv returns failure status
- when one or more specified variables do not exist or when incorrect
- command syntax is used.
- This aids scripting fw_printenv such that the script can key of the
- return status rather than relying on standard error "scraping".
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Tue May 6 16:18:00 2008 -0700
- Fix Compilation Errors with 'tools/env/fw_printenv'
- In the current top-of-tree, 1.3.3.-rc2, the optional tool
- 'tools/env/fw_printenv' fails to compile for two reasons:
- 1) The header watchdog.h cannot be found.
- 2) The header zlib.h is picked up from the tool chain rather than the
- project causing a prototype conflict for crc32.
- This patch addresses both of these issues.
- Platforms Tested On:
- - AMCC "Kilauea"
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- commit 597f6c26a18b389903a64692bacbf9a1ca69355b
- Author: James Yang <James.Yang@freescale.com>
- Date: Mon May 5 10:22:53 2008 -0500
- Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
- When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
- work before relocating to RAM because command history is written into
- a global array that is not writable before relocation. This patch
- defers to the no-editing and no-history code in readline_into_buffer()
- if it is called before relocation.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 726c0f1e5f108dccea052965123b95837d2bd402
- Author: Detlev Zundel <dzu@denx.de>
- Date: Mon May 5 16:11:22 2008 +0200
- cosmetic: Adjust coding style for switch statements to be consistent
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 574b319512b13e10800f0045e39b993f4ca25e42
- Author: Detlev Zundel <dzu@denx.de>
- Date: Mon May 5 16:11:21 2008 +0200
- Fix disk type output in disk/part.c
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
- Author: Vlad Lungu <vlad.lungu@windriver.com>
- Date: Mon May 5 14:20:03 2008 +0300
- Mail address change, documentation modified
- Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
- commit 4d49b28038e2819088e8356a77212fc95a89ce5a
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun May 4 15:42:41 2008 +0200
- microblaze: Repare intc handling
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun May 4 15:17:52 2008 +0200
- include/gitignore: update to all architectures
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1df368aed3b8bc240fe1595d290b0e91b22961da
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Mon May 5 02:12:06 2008 +0200
- ide: Remove spurious second include of io.h
- Removed the second include, with all the #ifdef around as suggested by Wolfgang.
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
- Author: Adrian Filipi <adrian.filipi@eurotech.com>
- Date: Tue May 6 16:46:37 2008 -0400
- Fix some typos
- This patch fixes three typos.
- The first is a repetition of CONFIG_CMD_BSP.
- The second makes the #endif comment match its #if.
- The third is a spelling error.
- Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
- commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
- Author: Grant Erickson <gerickson@nuovations.com>
- Date: Sun May 4 16:45:01 2008 -0700
- Recognize 'powerpc' As an Alias for IH_ARCH_PPC
- Add support for the recognition of 'powerpc' as an alias for the PowerPC
- architecture type since Linux is already trending in that direction,
- preferring 'powerpc' to 'ppc'.
- Signed-off-by: Grant Erickson <gerickson@nuovations.com>
- commit f5a24259190c388c2527bdc49fee34577d862cc7
- Author: Wheatley Travis <Travis.Wheatley@freescale.com>
- Date: Fri May 2 13:35:15 2008 -0700
- 7450 and 86xx L2 cache invalidate bug corrections
- The 7610 and related parts have an L2IP bit in the L2CR that is
- monitored to signal when the L2 cache invalidate is complete whereas the
- 7450 and related parts utilize L2I for this purpose. However, the
- current code does not account for this difference. Additionally the 86xx
- L2 cache invalidate code used an "andi" instruction where an "andis"
- instruction should have been used.
- This patch addresses both of these bugs.
- Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
- Acked-By: Jon Loeliger <jdl@freescale.com>
- commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri May 9 10:16:13 2008 +0200
- Avoid infinite loop "Generating include/autoconf.mk"
- Fix a bogus circular dependency that caused an infinite loop of
- "Generating include/autoconf.mk" again and again.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 567fb852178dbf59529d7301620a3f3732a4b02d
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu May 8 22:52:09 2008 +0200
- Fix @ -> <at> substitution
- When applying the AT91CAP9 patches upstream, something transformed
- the '@' character into the ' <at> ' sequence.
- The patch below restores the original form in all the places where
- it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
- were copied from AT91CAP9, and a couple of other files where the
- ' <at> ' sequence was present).
- Signed-off-by: Stelian Pop <stelian@popies.net>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 73ccb3410a0785593cda7aee455dfc51f790e281
- Author: Gary Jennejohn <gary.jennejohn@freenet.de>
- Date: Mon Apr 28 14:04:32 2008 +0200
- ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
- Signed-off-by: Gary Jennejohn <garyj@denx.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ef2642625cbfb1c3695e3478d08ae515052a4950
- Author: Stefan Roese <sr@denx.de>
- Date: Thu May 8 11:10:46 2008 +0200
- ppc4xx: Kilauea: Fix incorrect FPGA FIFO address
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a00eccfebc954ad9485161efeca7d9aaf626d530
- Author: Stefan Roese <sr@denx.de>
- Date: Thu May 8 11:05:15 2008 +0200
- ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
- This patch adds fdt (flattened device tree) support to all remaining AMCC
- eval boards. Most newer boards already support device tree. With this patch,
- all AMCC boards now enable device tree passing from U-Boot to Linux
- arch/powerpc kernels.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
- Author: Stefan Roese <sr@denx.de>
- Date: Thu May 8 11:01:09 2008 +0200
- ppc4xx: Add weak default ft_board_setup() routine
- This patch adds a default ft_board_setup() routine to the 4xx fdt code.
- This routine is defined as weak and can be overwritten by a board specific
- one if needed.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
- Author: Stefan Roese <sr@denx.de>
- Date: Thu May 8 10:48:58 2008 +0200
- ppc4xx: acadia: Add fdt support and fix section overlap problem
- This patch adds fdt (flattened device tree) support to the AMCC
- Acadia eval board. This increases the image size and it doesn't
- fit anymore into 256kByte. Since we didn't want to remove features
- from the configuration, we decided to increase the U-Boot image size
- (add one flash sector).
- Also changed the default environment definition to make it
- independent of such changes.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4adb3023de75bc150f088c8935db340930ad38c8
- Author: Ira Snyder <iws@ovro.caltech.edu>
- Date: Tue Apr 29 11:18:54 2008 -0700
- ppc4xx: Add device tree support to AMCC Yosemite
- Add support for booting with a device tree blob. This is needed to boot
- ARCH=powerpc kernels. Also add support for setting the eth0 mac address
- via the ethaddr variable.
- Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
- Author: Dave Mitchell <dmitchell@amcc.com>
- Date: Wed May 7 09:00:23 2008 -0700
- ppc4xx: Fix typos in 460GT/EX FBDV array
- Corrected two typos in the 460GT/EX FBDV array.
- Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed May 7 16:54:31 2008 -0500
- 85xx: Limit CPU2 workaround to parts that have the errata
- Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit a5fe514e8ace564300d2c1d73846ddff49654243
- Author: Lee Nipper <lee.nipper@freescale.com>
- Date: Fri Apr 25 15:44:45 2008 -0500
- mpc83xx: system performance settings for MPC8349EMDS.
- These same settings are used on MPC8349ITX, and
- improve performance on MPC8349EMDS.
- Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 49387dba910e485640b575e920ee463b7e611dc3
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue May 6 13:22:52 2008 +0900
- [MIPS] cpu/mips/cache.S: Fix build warning
- Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
- warns illegal global symbol references by bal (and jal also) instruction.
- This does not happen with the latest binutils v2.18.
- Here's an example on gth2_config:
- mips_4KC-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
- stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
- c -EB -c -o cache.o cache.S
- cache.S: Assembler messages:
- cache.S:243: Warning: Pretending global symbol used as branch target is local.
- cache.S:250: Warning: Pretending global symbol used as branch target is local.
- In principle, gas might be sensitive to global symbol references in PIC
- code because they should be processed through GOT (global offset table).
- But if `bal' instruction is used, it results in PC-based offset jump.
- This is the cause of this warning.
- In practice, we know it doesn't matter whether PC-based reference or GOT-
- based. As for this case, both will work before/after relocation. But let's
- fix the code.
- This patch explicitly sets up a target address, then jump there.
- Here's an example of disassembled code with/without this patch.
- 90000668: 1485ffef bne a0,a1,90000628 <mips_cache_reset+0x20>
- 9000066c: ac80fffc sw zero,-4(a0)
- 90000670: 01402821 move a1,t2
- -90000674: 0411ffba bal 90000560 <mips_init_icache>
- -90000678: 01803021 move a2,t4
- -9000067c: 01602821 move a1,t3
- -90000680: 0411ffcc bal 900005b4 <mips_init_dcache>
- -90000684: 01a03021 move a2,t5
- -90000688: 03000008 jr t8
- -9000068c: 00000000 nop
- +90000674: 01803021 move a2,t4
- +90000678: 8f8f83ec lw t7,-31764(gp)
- +9000067c: 01e0f809 jalr t7
- +90000680: 00000000 nop
- +90000684: 01602821 move a1,t3
- +90000688: 01a03021 move a2,t5
- +9000068c: 8f8f81e0 lw t7,-32288(gp)
- +90000690: 01e0f809 jalr t7
- +90000694: 00000000 nop
- +90000698: 03000008 jr t8
- +9000069c: 00000000 nop
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
- Author: Vlad Lungu <vlad.lungu@windriver.com>
- Date: Mon May 5 14:04:00 2008 +0300
- Allow building mips versions with ELDK 3.1.1
- .gpword works only with local symbols on certain binutils versions
- Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
- commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 5 12:52:36 2008 +0200
- MAKEALL: add inka4x0 board
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun May 4 21:34:23 2008 +0200
- kb9202 board: fix build problem.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun May 4 12:10:33 2008 +0200
- Prepare for v1.3.3-rc3
- Update ChNAGELOG, minor white space cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun May 4 00:35:15 2008 +0200
- drivers/net/tsec.c: Fix typo.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Fri May 2 21:45:12 2008 -0400
- version_autogenerated.h: use printf rather than echo -n
- Some systems are dumb and do not implement the -n flag to echo (like OS X).
- Convert the Makefile to use printf as this should work everywhere.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4acc2a108ad0a669165924704a6cb083f9138242
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Fri May 2 18:17:50 2008 -0400
- fix building when saveenv is disabled in some setups
- If you enable environment in the flash, but disable the embedded
- option, and you disable the saveenv command, then the #if nested
- logic will trigger a compile failure:
- env_flash.c: In function 'env_relocate_spec':
- env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
- The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
- Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
- Date: Fri May 2 16:10:04 2008 -0400
- SBC8548: fix address mask to allow 64M flash
- Fix incorrect mask to enable all 64MB of onboard flash.
- Previously U-Boot incorrectly mapped only 8MB of flash, this
- patch correctly maps all the available flash.
- Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
- commit 3648085c464c8c22ef76fab006ca4344d3796124
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri May 2 19:48:56 2008 +0200
- qemu_mips: add README
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6fdd002689190a0022c7b3dbab37fcba724580ce
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Fri May 2 02:35:59 2008 +0200
- Fix misspelled comment
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Thu May 1 04:13:05 2008 -0400
- mkimage: make mmap() checks consistent
- The mmap() related code is full of inconsistent casts/constants when
- it comes to error checking, and may break when building on some
- systems (like ones that do not implicitly define the caddr_t type).
- Let's just avoid the whole mess by writing the code nice and clean in
- the first place.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Thu May 1 09:05:34 2008 +0200
- Fix defined but not used build warning
- - warning: 'srom' defined but not used
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Thu May 1 09:05:26 2008 +0200
- Fix implicit declaration build warnings
- - warning: implicit declaration of function ‘serial_initialize’
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit 9acde129cc3f9c1b3bc11a821480dd446774d618
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Tue Apr 29 19:18:32 2008 +0200
- TSEC: add config options for VSC8601 RGMII PHY
- The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
- and Tx clock lines. They are configured using 2 bits in extended
- register 0x17.
- Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
- been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Acked-by: Andy Fleming <afleming@freescale.com>
- Acked-by: Ben Warren <biggerbadderben@gmail.com>
- --
- drivers/net/tsec.c | 6 ++++++
- drivers/net/tsec.h | 3 +++
- 2 files changed, 9 insertions(+), 0 deletions(-)
- commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 3 23:07:15 2008 +0200
- Revert "ColdFire: Get information from the correct GCC"
- This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
- (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
- commit c4e5f52a58d278eebb87f476e353972c5dacea40
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 3 22:25:00 2008 +0200
- config.mk: use correct (cross) compiler
- Some config.mk files reference $(CC) to test for specific tool chain
- features, so make sure $(CC) gets set before including any such
- config files.
- This patch replaces commit b7166e05a5 ("ColdFire: Get information from
- the correct GCC").
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 27c38689d0cfde0e444239345f97b5eecc9f4067
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu May 1 02:13:44 2008 +0200
- pxa: fix previous definition on cpu init
- start.S:183:1: warning: "ICMR" redefined
- In file included from start.S:33:
- include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
- start.S:187:1: warning: "RCSR" redefined
- ...
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6d12e697de794d700767f22f950e3026ccf4daf6
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu May 1 02:13:43 2008 +0200
- pxa: fix pcmcia operation on 'i' may be undefined
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Apr 30 16:24:35 2008 -0500
- MPC8610HPCD: Drop -O2 from the build flags
- Make the flags use -Os like all other boards
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 30 15:50:39 2008 +0200
- RTC: Fix month offset by one problem in M41T62 RTC driver
- This patch fixes a problem with the month being read and written
- incorrectly (offset by one). This only gets visible by also using
- the Linux driver (rtc-m41t80).
- Tested on AMCC Canyonlands.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 141ba1cad8e6598a2466e7e2976c6a12285df619
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat May 3 13:51:44 2008 +0900
- [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
- Current trick to pick up GNU assembler minor version uses a dot(.) as a
- delimiter, and take the second field to obtain minor version number. But
- as can be expected, this doesn't work with a version string which has
- dots more than needs.
- Here's an example:
- $ mips-linux-gnu-as --version | grep 'GNU assembler'
- GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
- $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
- 2-129) 2
- $
- This patch restricts the version format to 2.XX.XX... This will work
- in most cases.
- $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
- 2.18.50.20080215
- $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
- 18
- $
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit ea638951acead7f1086c908c0b9f086beab82a22
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat May 3 13:51:28 2008 +0900
- [MIPS] cpu/mips/cache.S: Add dcache_enable
- Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
- "allow ports to override bootelf behavior") requires ports to have this
- function.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu May 1 21:30:16 2008 +0200
- onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
- Onenand needs a version of memcpy() which performs 16 bit accesses
- only; make sure the name does not conflict with the standard
- function.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 12bc4e94251c369c529ffa505cf58b148c372f7f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Apr 30 22:38:17 2008 +0200
- cmd_nand: fix warning: str2long ncompatible pointer type
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Apr 4 11:16:11 2008 -0500
- Fix calculation of I2C clock for some 86xx chips
- Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
- There is no pattern that can be used to determine which chips use which
- frequency, so the only way to determine is to look up the actual SOC
- designation and use the right value for that SOC.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Apr 30 12:11:19 2008 -0500
- ColdFire: Fix ethernet hang issue for mcf547x_8x
- The ethernet hang is caused by receiving buffer in DRAM is not
- yet ready due to access cycles require longer time in DRAM.
- Relocate DMA buffer descriptors from DRAM to internal SRAM.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Apr 30 12:10:47 2008 -0500
- ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
- Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Apr 30 12:10:23 2008 -0500
- ColdFire: Get information from the correct GCC
- Signed-off-by: Kurt Mahan <kmahan@freescale.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
- Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
- Date: Wed Apr 30 18:02:59 2008 +0200
- Fix warning in env_nand.c if compiled for DaVinci Schmoogie
- Fix warnings
- nv_nand.c: In function 'saveenv':
- env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
- env_nand.c: In function 'env_relocate_spec':
- env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
- if compiled for davinci_schmoogie_config.
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- Ack by: Sergey Kubushyn <ksi@koi8.net>
- commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Apr 30 13:34:40 2008 +0200
- Fix warnings while compiling net/net.c for MPC8610HPCD board
- MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
- causing overriding default -Os option. New gcc (ver. 4.2.2)
- produces warnings while compiling net/net.c file with -O2
- option. The patch is an attempt to fix this.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 58b575e575c25fdf8c88141e145db201f3092149
- Author: Sascha Laue <Sascha.Laue@gmx.biz>
- Date: Wed Apr 30 15:23:38 2008 +0200
- lwmon5: fix offset error in sysmon0 POST
- Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e7419b243a373de4ee042f7d4f45f66de787240d
- Author: Sascha Laue <Sascha.Laue@gmx.biz>
- Date: Wed Apr 30 15:16:35 2008 +0200
- lwmon5: fix manual merge error in POST
- Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
- commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 30 17:46:26 2008 +0200
- cmd_nand.c: fix another 'incompatible pointer type' warning.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit de109d909707e2dfe806be5efc3cdb103b47c8ad
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 30 17:25:07 2008 +0200
- Makefile: fix parallel builds
- This problem shows up with parallel builds only; it results in
- somewhat cryptic error messages like
- $ JOBS=-j6 MAKEALL netstar
- Configuring for netstar board...
- arm-linux-ld: cannot find -lgeneric
- make[1]: *** [eeprom.srec] Error 1
- A few boards (like netstar and voiceblue) need some libraries for
- building; however, the board Makefile does not contain any such
- dependencies which may cause problems with parallel builds. Adding
- such dependencies is difficult as we would also have to provide build
- rules, which already exist in the respective library Makefiles.
- To solve this, we make sure that all libraries get built before the
- board code.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 30 14:51:36 2008 +0200
- ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
- This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
- used for NAND booting to match the values needed for the new 512MB
- DIMM modules shipped with the productions boards:
- Crucial: CT6464AC667.8FB
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ea9202a659dc75996facf1475f1866a19a9d3129
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 30 10:49:43 2008 +0200
- ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
- This patch fixes a problem with DIMMs that have 8 banks. Now the
- MCIF0_MBxCF register will be setup correctly for this setup too.
- This was noticed with the 512MB DIMM on Canyonlands/Glacier.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Apr 29 23:41:06 2008 +0200
- Prepare v1.3.3-rc2, again.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b7fcc4c13993782342cf5cd20d237a6281648a0b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Apr 29 23:35:24 2008 +0200
- Prepare v1.3.3-rc2
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Apr 29 23:32:20 2008 +0200
- common/env_nand.c: fix one more incompatible pointer type issue
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Apr 29 21:33:08 2008 +0200
- post/board/lwmon5/sysmon.c: fix manual merge error.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Apr 29 12:54:59 2008 -0500
- 85xx: Add -mno-spe to e500/85xx builds
- Newer gcc's might be configured to enable autovectorization by default.
- If we happen to build with one of those compilers we will get SPE
- instructions in random code.
- -mno-spe disables the compiler for automatically generating SPE
- instructions without our knowledge.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Apr 29 10:18:34 2008 -0500
- Update .gitignore for zlib.h
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 45239cf4152109caa925145ccd433529902df887
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Apr 29 10:27:08 2008 -0500
- 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
- All the 85xx and 86xx UM describe the register as timing_cfg_3
- not as ext_refrec.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ef7d30b14394e4c4a153118f5845760cadada02a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Apr 29 10:28:34 2008 -0500
- 85xx/86xx: Rename DDR init address and init extended address register
- Rename init_addr and init_ext_addr to match the docs between
- 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit cf6cc014270549684873a5972d2595052c468cb6
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Apr 28 02:24:04 2008 -0500
- 85xx: Additional fixes and cleanup of MP code
- * adjust __spin_table alignment to match ePAPR v0.94 spec
- * loop over all cpus when determing who is up. This fixes an issue if
- the "boot cpu" isn't core0. The "boot cpu" will already be in the
- cpu_up_mask so there is no harm
- * Added some protection in the code to ensure proper behavior. These
- changes are explicitly needed but don't hurt:
- - Added eieio to ensure the "hot word" of the table is written after
- all other table updates have occurred.
- - Added isync to ensure we don't prefetch loading of table entries
- until we a released
- These issues we raised by Dave Liu.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit b2d527a8b9fb50afccbaf79b5540952585cdc760
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Tue Apr 29 15:06:41 2008 +0200
- lwmon5: minor clean-up to include/configs/lwmon5.h
- LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
- the CFG_DSPIC_TEST_ADDR definition more readable.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit f4c4d21a885ccc222fd0acdf653b683249e85117
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 29 16:08:05 2008 +0200
- ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Tue Apr 29 13:32:45 2008 +0200
- ppc flush_cache: add watch-dog triggering into the loops.
- Some boards (e.g. lwmon5) need rather a frequent watch-dog
- kicking. Since the time it takes for the flush_cache() function
- to complete its job depends on the size of data being flushed, one
- may encounter watch-dog resets on such boards when, for example,
- download big files over ethernet.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit cab99d6f3281ab6784feccf98b9b425daa58418a
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 29 14:44:54 2008 +0200
- ppc4xx: Fix compilation warning in denali_spd_ddr2.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 29 14:12:07 2008 +0200
- ppc4xx: Fix Katmai CFG_MONITOR_LEN
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 29 13:57:07 2008 +0200
- ppc4xx: Complete remove bogus dflush()
- Since the current dflush() implementation is know to have some problems
- (as seem on lwmon5 ECC init) this patch removes it completely and replaces
- it by using clean_dcache_range().
- Tested on Katmai with ECC DIMM.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 29 13:36:51 2008 +0200
- ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
- As it seems the "old" ECC initialization routine by using dflush() didn't
- write all lines in the dcache back to memory on lwmon5. This could lead
- to ECC error upon Linux booting. This patch changes the program_ecc()
- routine to now use clean_dcache_range() instead of dflush().
- clean_dcache_range() uses dcbst which is exactly what we want in this
- case.
- Since dflush() is known is cause problems, this routine will be
- removed completely and replaced by clean_dcache_range() with an
- additional patch.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Mon Apr 28 18:19:34 2008 +0200
- POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
- Author: Markus Brunner <super.firetwister@googlemail.com>
- Date: Mon Apr 28 08:47:47 2008 +0200
- ppc4xx: Fixup ebc clock in FDT for 405GP/EP
- On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
- and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
- doesn't exist.
- Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
- commit 2ef7503a593c77a80c2a054011970227c4b62774
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Apr 24 07:57:17 2008 +0200
- NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
- Move non-inlied functions into specific drivers file
- Set get_prom as weak
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Apr 3 17:04:19 2008 +0200
- net: make ARP timeout configurable
- Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
- On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
- to the boards get lost, which typically are ARP replies. By configuring
- the timeout to a lower value we significantly improve the first network
- transfer time on this board. The timeout is specified in milliseconds,
- later internally it is converted to deciseconds, because it has to be
- converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
- different boards.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Apr 3 13:36:18 2008 +0200
- minor cs8900 driver clean up
- Remove a redundant register definition, clean up some coding style
- violations.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 22:01:04 2008 +0200
- jffs2_1pass.c: fix incompatible pointer type warning
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
- Author: Sascha Laue <Sascha.Laue@gmx.biz>
- Date: Tue Apr 1 10:10:18 2008 +0200
- lwmon5: update dsPIC POST spezification
- The specification for the lwmon5 board dsPIC POST got changed.
- Also add defines for the temperatures and voltages.
- Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
- commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
- Author: Sascha Laue <Sascha.Laue@gmx.biz>
- Date: Tue Apr 1 15:13:03 2008 +0200
- Fix watchdog POST for lwmon5
- If the hardware watchdog detects a voltage error, the watchdog sets
- GPIO62 to low. The watchdog POST has to detect this low level.
- Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit dd5748bcd669f46aeb6686c1b341323843738ccc
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Mon Apr 28 14:37:14 2008 +0200
- rtl8169: fix compiler warnings
- Fix multiple compiler warnings related to argument type mismatch.
- Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Mon Apr 28 14:36:06 2008 +0200
- IDE: fix compiler warnings
- The IDE driver can use 32-bit addresses in LBA mode, in which case it
- spits multiple warnings during compilation. Fix them.
- Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- commit db9084de28c46ac81c8f681722cb0d7411be4d7f
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Mon Apr 28 14:35:57 2008 +0200
- LinkStation: fix compiler warning, add a maintainer
- out_8 wants a pointer to an unsigned as the first argument. Add a
- maintainer for Linkstation boards.
- Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- commit c71abba3cb67b063f789f17abf6c7447727c0cd5
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 14:55:12 2008 +0200
- cmd_nand.c: fix "differ in signedness" problem
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f2c288a35341ad02ac03b1563d786763c9c8f159
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 12:48:47 2008 +0200
- pcnet.c: fix a merge issue
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 12:08:18 2008 +0200
- NAND: fix some strict-aliasing compiler warnings
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Apr 28 11:37:14 2008 +0200
- ppc4xx: Fix compile warning of hcu4 board
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 11:31:23 2008 +0200
- MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Mon Apr 28 00:25:32 2008 +0200
- mx31ads: fix loadaddr environment variable define
- Arithmetic expressions do not get evaluated under stringification. Remove
- default network configuration, add DHCP command support. Thanks to Felix
- Radensky for reporting.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 144eec777ac07bcb12bd38245a5a289f694a7f98
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 10:55:24 2008 +0200
- katmai: fix section overlap problem
- Since we didn't want to remove features from the configuration, we
- decided to increase the U-Boot image size (add one flash sector).
- Also changed the default environment definition to make it
- independent of such changes.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 941d696d25624e3cc65ebf924199541acf52d74e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Apr 28 10:55:24 2008 +0200
- katmai: fix section overlap problem
- Since we didn't want to remove features from the configuration, we
- decided to increase the U-Boot image size (add one flash sector).
- Also changed the default environment definition to make it
- independent of such changes.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Sat Apr 26 11:44:44 2008 -0500
- post: Fix building with O=
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Apr 26 01:55:00 2008 +0200
- Prepare v1.3.3-rc1
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 19cf2ec90d8ce52da60c1693693c4048cb810967
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Apr 26 01:25:39 2008 +0200
- post/Makefile: make sure to use the correct flags
- ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
- messages to be printed.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Apr 26 00:34:42 2008 +0200
- Coding Style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f9204e15173834ff8d123e36279ce49c3c6c74fc
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Sun Apr 20 10:38:12 2008 +0200
- i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
- This patch enables SPI and MC13783/RTC support for the Litekit board.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit f97abbfb47d9e407354e157cae3f6369e460cd37
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Apr 25 01:08:32 2008 -0500
- MPC8544DS: decode pcie3 end-point configuration correctly.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 292188e15523c165c4269403fdcd33c26d89176e
- Author: Roy Zang <tie-fei.zang@freescale.com>
- Date: Fri Apr 25 00:55:09 2008 -0500
- MPC8544DS: Removes the unknown flash message information
- This patch removes the unknown flash message information:
- '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
- This unknown flash message is caused by PromJet.
- Some of the board user is unhappy with this information.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Apr 24 14:07:38 2008 -0500
- mpc83xx: bump loadaddr over fdtaddr to 0x500000
- this seems as a good compromise between human memory, typing,
- and last but not least, to accommodate for current and future kernel bloat.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Acked-by: Dave Liu <daveliu@freescale.com>
- commit be5a7190265a34d968578ff266549c60f6f57654
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Apr 15 13:12:23 2008 +0800
- mpc83xx: clean up the readme for 83xx boards
- 1. correct the typo
- 2. correct the memory map for 837xerdb board
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Apr 15 13:11:11 2008 +0800
- mpc83xx: remove the unused CPM's stuff
- The MPC83xx family never have CPM block, so remove it from 83xx.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit c63ad6325a8ac0097a54b418a3288926b0484b18
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Apr 18 16:29:40 2008 +0200
- cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
- This patch adds a configurable flash auto protection list that can be used
- to make U-Boot protect flash regions in flash_init().
- The idea has been discussed on the u-boot mailing list starting
- on Nov 18th, 2007.
- Even this patch brings a new feature it is used as a bugfix for 4xx
- platforms where flash_init() does not completely protect the
- monitor's flash range in all situations.
- U-Boot protects the flash range from CFG_MONITOR_BASE to
- (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
- include the reset vector at 0xfffffffc.
- Example:
- #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
- This config option will auto protect the last 512k of flash that
- contains the bootloader on board like APC405 and PMC405.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Apr 25 13:59:03 2008 +0200
- ppc4xx: Remove double defines in lwmon5.h
- introduced with latest lwmon5/POST merge
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7590378fb9c686709492ceb142825cd058255956
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Apr 25 13:54:02 2008 +0200
- Use watchdog-aware functions when calculating hashes of images - take two
- Some files didn't get updated properly with the "Use watchdog-aware
- functions when calculating hashes of images" commit, this commit
- fixes this.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8e048c438e20ec89b49da5f085f8f756eba6e587
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Apr 25 12:01:39 2008 +0200
- ppc4xx: Add bootcount limit handling for APC405 boards
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Apr 25 12:10:09 2008 +0200
- Use watchdog-aware functions when calculating hashes of images
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 25 12:44:08 2008 +0200
- USB: fix more GCC 4.2.x aliasing warnings
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- Acked-by: Markus Klotzbuecher <mk@denx.de>
- commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 25 12:41:53 2008 +0200
- lib_generic/crc32.c: add missing #include <watchdog.h>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 25 11:52:21 2008 +0200
- lib_generic/crc32.c: fix compile problem
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 22 12:20:32 2008 +0200
- ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
- The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
- environment variable will now get passed to the Linux kernel by setting
- the device_type property of the PCIe device tree node. For normal root-
- complex configuration it will keep its defaults value of "pci" and for
- endpoint configuration it will get changed to "pci-endpoint".
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu Apr 24 10:30:53 2008 +0200
- lwmon5: watchdog POST fix
- Use the GPT0_MASKx registers as the temporary storage for watch-dog
- timer POST test instead of GPT0_COMPx. The latter
- (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Apr 21 18:10:14 2008 -0500
- lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
- This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
- proven problematic getting right from the start at least on 83xx and
- 4xx.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit a99715b8ebfc500f3f40e01b36b64d473938443d
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Apr 18 14:50:01 2008 +0200
- Realining some header definitions.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 4acbc6c7f993cae409c424615415a3e76820f13d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Apr 24 07:57:16 2008 +0200
- NE2000: coding style cleanup
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit b4aff1ffaf7120032c653357c007faa14f74d29d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Apr 23 00:11:47 2008 +0900
- qemu-mips.h: Add CFI support
- CONFIG_ENV_OVERWRITE is also added.
- This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Apr 22 22:47:27 2008 +0900
- doc/README.mips: Add MIPS notes
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 215b01bba8bc662d35f72b084700b192d367dfb4
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Apr 22 12:27:56 2008 +0200
- Add support for calculating hashes with watchdog triggering
- Implement watchodg-aware variants of hash calculation functions:
- - crc32_wd()
- - md5_wd()
- - sha1_csum_wd()
- The above functions calculate the hash of the input buffer in chunks,
- triggering the watchdog after processing each chunk. The chunk size
- is given as a function call parameter.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Wed Apr 23 11:02:12 2008 +0900
- qemu-mips: Cleanup whitespace, indentation, etc.
- No functional change.
- This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
- Then I re-created from scratch, and changed more lines than the original.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Wed Oct 10 23:02:09 2007 +0300
- Fixed pcnet io_base
- Bus and phys address are not always the same
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Apr 24 23:44:26 2008 +0200
- drivers/net/pcnet.c: Coding Style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Wed Oct 10 23:04:23 2007 +0300
- Added Am79C970A chip id to pcnet
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Sun Apr 20 10:35:03 2008 +0200
- i.MX31: Fix architecture numbers for ADS and Litekit boards
- Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit e7ae84d6c7288790e88639f57cb60daf89c11369
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Sun Apr 20 10:36:36 2008 +0200
- i.MX31: Use symbolic names for Litekit membases.
- Use symbolic names instead of hard coded addresses for Litekit membases.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Apr 19 17:59:20 2008 +0200
- Fix show_boot_progress prototype
- in commit fad634071 "make show_boot_progress () weak."
- show_boot_progress is supposed to be declared as weak but declared as
- inline instead.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit edbed247a14d70b94958010f736621212285de91
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Apr 18 12:39:23 2008 +0200
- Memory footprint optimizations
- As suggested by Wolfgang Denk:
- - image printing functions:
- - remove wrappers
- - remove indentation prefix from functions' signatures
- - merge getenv_verify and getenv_autostart into one parametrized function
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Apr 15 13:33:11 2008 +0200
- MX31ADS environment variable update, spi and rtc support
- Update MX31ADS default environment to better match the flash layout and
- the memory map, support SPI and RTC.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Apr 21 09:28:36 2008 -0500
- 85xx: Round up frequency calculations to get reasonable output
- eg. because of rounding error we can get 799Mhz instead of 800Mhz.
- Introduced DIV_ROUND_UP and roundup taken from linux kernel.
- Signed-off-by: Dejan Minic <minic@freescale.com>
- Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Apr 23 16:58:04 2008 -0500
- fsl_pci: Only modify registers if we have them
- pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 83fe32334337def160b302aa9d152d808bfcc68e
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Wed Apr 23 10:57:33 2008 +0200
- USB: remove a cpu bug workaround for an unsupported architecture.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit f957576cb53e6cfab412709cfc8db1afd39d21c3
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Wed Apr 23 10:53:23 2008 +0200
- USB: fix those pesky aliasing warnings issued by gcc-4.2
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 89cdab788f3716b335fefb60b836ebcf975aceab
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Mar 31 11:02:01 2008 -0400
- crc32: use uint32_t rather than unsigned long
- The envcrc.c does sizeof(unsigned long) when calculating the crc, but
- this is done with the build toolchain instead of the target tool
- chain, so if the build is a 64bit system but the target is 32bits,
- the size will obviously be wrong. This converts all unsigned long
- stuff related to crc32 to uint32_t types. Compile tested only: output
- of ./tools/envcrc when run on a 32bit build system matches that of a
- 64bit build system.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 80c40b765b3642ddb9f3392b7898715aab44a29c
- Author: Dirk Behme <dirk.behme@googlemail.com>
- Date: Wed Mar 26 09:53:29 2008 +0100
- ARM: Davinci: Fix DM644x timer overflow handling and cleanup
- Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
- Changes:
- - Remove *_masked() functions as noted by Wolfgang
- - Adapt register naming to recent TI spec (sprue26, March 2007)
- - Fix reset_timer() handling
- - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
- [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
- - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
- Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
- Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
- commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Wed Apr 9 16:09:41 2008 +0200
- Added watchdog triggering calls in the "mtest" test function.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Sun Apr 6 19:19:14 2008 +0200
- lwmon5 watchdog: limit trigger rate
- Limit the rate of h/w watch-dog triggering on the LWMON5 board by
- the CONFIG_WD_MAX_RATE value.
- Note that an earlier version of this patch which used microseconds
- instead of ticks dis not work. The problem was that we used
- usec2ticks() to convert microseconds into ticks. usec2ticks() uses
- get_tbclk(), which in turn calls get_sys_info(). It turns out that
- this function does a lot of prolonged operations (like divisions)
- which take too much time so we do not trigger the watchdog in time,
- and it resets the system.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 2d2b994a30bb100774dc747ae9865b7f95285a88
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Mon Mar 31 10:51:37 2008 +0200
- POST: move CONFIG_POST to Makefiles
- Introduce the new logical option CONFIG_HAS_POST which is set when the
- platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
- to determine should the POST libs be compiled for the selected target
- platform, or not.
- To avoid breaking u-boot linking process, the empty post/libpost.a file is
- created for platforms which do not have POSTs.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Mon Mar 31 10:49:34 2008 +0200
- POST: preparations for moving CONFIG_POST to Makefiles
- Remove CONFIG_POST ifdefs from the post/ source files.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 22 14:14:20 2008 +0200
- ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
- This patch fixes the Canyonlands and Glacier default environment to better
- fit to the arch/powerpc device-tree kernels. The variables dealing with
- arch/ppc booting are removed, since these boards are supported only in
- arch/powerpc. Glacier uses the same config file as Canyonlands.
- Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 22 14:06:42 2008 +0200
- ppc4xx: Small coding style cleanup for the latest esd patches
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 79941d63bc03aed8c48d7602f18217cc200ee931
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 18:01:07 2008 +0200
- ppc4xx: Update CPU strapping for PMC440 boards
- This patch removes the temporary 'test' strapping option
- of the sbe command. The '667' strapping option now uses
- a PLB/PCI divider of 3.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit f00cf3193a6635355b121e90debb2f54e777e7da
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 14:42:21 2008 +0200
- ppc4xx: Remove unused APC405 strataflash driver
- The APC405 board support has been migrated to use the common
- CFI flash driver.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 1c686676a86473bbd92151f0544e109413f6ed06
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 14:42:17 2008 +0200
- ppc4xx: Update APC405 configuration
- - enable esd's auto_update mechanism
- - support alternative flash layout on rev. 1.8 boards
- - update default environment
- - use common CFI flash driver
- - coding style cleanup
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 0b9872515a521bf7866dc24b85ddce708e60d702
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 14:42:11 2008 +0200
- ppc4xx: Update APC405 board support
- - enable esd's auto_update mechanism
- - fix LCD support on latest hardware revision (uses other LCD controller)
- - support alternative flash layout on rev. 1.8 boards
- - coding style cleanup
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 83975d02e225e231960784972e7820a8b303756b
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 14:42:06 2008 +0200
- ppc4xx: update esd's common auto_update code for 405 boards
- - Coding style cleanup (long lines)
- - improve handling of protected flash regions
- - remove dead code
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit b9233fe5d59cb25d975071616bd1035d6f4c2285
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 14:41:59 2008 +0200
- ppc4xx: Update esd's common LCD code for 405 boards
- - Coding style cleanup (long lines)
- - Add s1d13505 support
- - Make some functions return a result code instead of void
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit dea68189424c3f1242427a8146a3861bf093173c
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 11:36:55 2008 +0200
- ppc4xx: Update FPGA image for APC405 boards
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 2a05b152924acfcec3b037693329e517e6d3578f
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 11:36:08 2008 +0200
- ppc4xx: Update bootlogo for APC405 boards
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Apr 18 16:41:31 2008 +0200
- ppc4xx: Add dcache_enable() for 440
- dcache_enable() was missing for 440 and the patch
- 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
- "] behavior uses this function.
- Note: Currently the cache handling functions like
- d/icache_disable/enable() are NOP's on 440. This may be changed in the
- future.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a49e0d177a0749614b316ec847fb623f09c82c07
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Apr 21 11:19:04 2008 +0200
- video: Add missing free for logo memory
- This patch adds two missing free()s.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
- Author: Troy Kisky <troy.kisky@boundarydevices.com>
- Date: Mon Sep 24 16:41:43 2007 -0700
- PATCH - Fix oob data copied into supplied buffer
- This patch correctly sets the oobavail variable
- and fixes a bug where the oob data was not valid when
- there where multiple groups in oobfree.
- First segment fixes a typo
- Second segment fixes a bug where oob data may be copied incorrectly.
- Third segment adds an error message when exiting due to write protect.
- Forth segment fixes a bug where oobavail may be set incorrectly.
- Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
- commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Apr 18 17:24:32 2008 +0200
- ppc4xx: Fix sys_get_info() for 405GP(r)
- This patch assigns the correct EBC clock for 405GP(r) CPUs
- to PPC4xx_SYS_INFO structure. Without this patch U-Boot
- uses an uninitialized EBC clock in its startup message.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Apr 20 15:39:38 2008 -0700
- Makefile: remove nand_spl/System.map when cleaning up.
- commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Apr 20 15:35:52 2008 -0700
- MAKEALL: sort entries / lists.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0878af169b181868a105b5c33f3a6423e2c9fd60
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Apr 18 11:29:01 2008 -0500
- 85xx: Fix size of cpu-release-addr property
- The cpu-release-addr is defined as always being a 64-bit quanity regardless
- if we are running on a 32-bit or 64-bit machine.
- commit 88353a985109562a639b2f8a0c90d77011bfe374
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Apr 4 11:15:58 2008 -0500
- Fix calculation of I2C clock for some 85xx chips
- Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
- some use CCB/3. There is no pattern that can be used to determine which
- chips use which frequency, so the only way to determine is to look up the
- actual SOC designation and use the right value for that SOC.
- Update immap_85xx.h to include the GUTS PORDEVSR2 register.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 18 11:44:27 2008 -0700
- Fix build breakage casued by commit c0559be371b2
- Change env_get_char from a global function ptr to a function.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 18 10:53:41 2008 -0700
- Coding Style cleanup, update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Apr 8 14:00:57 2008 -0400
- Add support for u-boot in svn and localversion-* files
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit d23ff6827decf121461fbc5622612fd7effe207e
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Apr 3 17:04:22 2008 +0200
- MX31ADS network and flash updates
- This patch allows U-Boot to use buffered writes to the Spansion NOR
- flash installed on this board, and eliminates long delays in network
- transfers after the board startup.
- Also modify flash layout to embed main and redundant environment
- blocks in the U-Boot image.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit b5dc9b304d289831f291843ff88a45cbdf1a6290
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Mon Apr 14 10:53:12 2008 +0200
- Support for the MX31ADS evaluation board from Freescale
- This patch adds support for the MX31ADS evaluation board from Freescale,
- initialization code is copied from RedBoot sources, also provided by
- Freescale.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 8 10:33:29 2008 +0200
- ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 8 10:33:28 2008 +0200
- ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 8 10:33:27 2008 +0200
- ppc4xx: Add Glacier NAND booting target
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 46f373838e384a4c23d13581b1dfa5acb66b5810
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Apr 8 10:31:00 2008 +0200
- nand_spl: Update nand_spl to support 2k page size NAND devices
- This patch adds support for booting from 2k page sized NAND device
- (e.g. Micron 29F2G08AAC).
- Tested on AMCC Canyonlands.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Apr 17 18:18:00 2008 +0200
- Fix crash on sequoia in ppc_4xx_eth_init
- Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
- with cache enabled (TLB Parity exeption). This patch
- fixes the problem.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Apr 17 18:15:27 2008 +0200
- ppc4xx: Fix crash on sequoia with cache enabled
- Currently U-Boot crashes on sequoia board in CPU POST if
- cache is enabled (CONFIG_4xx_DCACHE defined). The cache
- won't be disabled by change_tlb before CPU POST because
- there is an insufficient adress range check since
- CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
- this problem.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 43c509254fab375c49936498da944658117ed07c
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Thu Apr 17 23:35:13 2008 +0900
- Use jr as register jump instruction
- Current assembler codes are inconsistent in the way of register jump
- instruction usage; some use jr, some use j. Of course GNU as allows both
- usages, but as can be expected from `Jump Register' the mnemonic `jr' is
- more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
- at all.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 7ce63709828d37b08866e537339a169bd0db2bd3
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Apr 15 14:15:30 2008 +0200
- RTC driver for MC13783
- MC13783 is a multifunction IS with an SPI interface to the host. This
- driver handles the RTC controller in this chip.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 38254f45b0b412332726c90d3184ad47479fcffb
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Apr 15 14:14:25 2008 +0200
- New i.MX31 SPI driver
- This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
- only implemented and tested on i.MX31, can with a modified register layout
- and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
- controllers too.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
- Author: Magnus Lilja <lilja.magnus@gmail.com>
- Date: Tue Apr 15 19:09:10 2008 +0200
- Fix name of i.MX31 boards in config file header
- Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
- Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
- commit a49864593e083a5d0779fb9ca98e5a0f2053183d
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sun Apr 13 19:42:19 2008 -0400
- allow ports to override go behavior
- Split the arch-specific logic out of the common go code and into a dedicated
- weak function called do_go_exec() that lives in cpu directories. This will
- need review from i386/nios people to make sure I didn't break them.
- commit 017e9b7925f74878d0e9475388cca9bda5ef9482
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sun Apr 13 19:42:18 2008 -0400
- allow ports to override bootelf behavior
- Change the bootelf setup function into a dedicated weak function called
- do_bootelf_exec. This way ports can control the behavior however they
- like before/after calling the ELF entry point.
- commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
- Author: Ulf Samuelsson <ulf@atmel.com>
- Date: Sat Apr 12 20:56:03 2008 +0200
- Reorder ARM boards in Makefile
- Rearrange ARM boards in Makefile so that ARM926EJ-S boards
- are no longer under ARM92xT header.
- Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
- Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
- Author: Ulf Samuelsson <ulf@atmel.com>
- Date: Sat Apr 12 20:29:44 2008 +0200
- Clean up dataflash partitioning
- This patch removes the board dependent parts from
- "drivers/mtd/dataflash.c".
- Each board relying on this, will have the appropriate
- code in a new file, "partition.c" in the board directory.
- board Makefiles updated to use the file.
- The dataflash partitions are aligned on sector/page boundaries.
- The CONFIG_NEW_DF_PARTITION was used to create named partitions
- This is now the default operation, and the CONFIG variable is removed.
- Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
- commit 51ecde946fec511a16346e498204ca10ad71080d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Apr 12 14:08:45 2008 +0200
- gitignore: udpate stgit generated and .patch file
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 18 00:15:36 2008 -0700
- Get rid of redundant copy of renamed header file.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Fri Apr 11 21:20:14 2008 +0300
- Fix dependency generation for older gcc versions
- With gcc 3.3.3 at least, compilation fails with
- Generating include/autoconf.mk
- gcc: compilation of header file requested
- make: *** [include/autoconf.mk] Error 1
- since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit cb1c4896905ab22fcd982e6a8a539f0031942e71
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Apr 11 11:07:49 2008 +0200
- Restore the ability to continue booting after legacy image overwrite
- Before new uImage code was merged, bootm code allowed for the kernel image to
- get overwritten during decompresion. new uImage introduced a check for image
- overwrites and refused to boot the image that got overwritten. This patch
- restores the old behavior. It also adds a warning when the image overwriten is
- a multi-image file, because in such case accessing componentes other than the
- first one will fail.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Apr 11 11:07:43 2008 +0200
- ppc: Fix ftd_blob variable init when processing raw blob
- Set fdt_blob variable before its value is printed out.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 3d36be030043cd841a2551d00a395135e363a64b
- Author: Jason Wessel <jason.wessel@windriver.com>
- Date: Thu Apr 10 14:30:16 2008 -0500
- Remove all the search paths from the .lds files.
- The cross compiler is responsible for providing the correct libraries
- and the logic to find the linking libraries.
- Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
- commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Mon Apr 14 15:44:16 2008 +0200
- Boot-related documentation update
- - document 'bootm_low' and 'bootm_size' environment variables
- - update inaccurate CFG_BOOTMAPSZ entry
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Wed Apr 9 17:34:08 2008 +0200
- Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
- Restore logic reverted by commit
- commit 80767a6cead9990d9e77e62be947843c2c72f469
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed Sep 5 16:04:41 2007 +0100
- Changed API name to coloured_led.h
- Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
- Tidied other cpu/arm920t/start.S code
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Apr 8 10:24:24 2008 -0400
- Remove conflicting NAND ID
- There are two NAND entries with ID 0xDC and this obviously causes problems.
- In the kernel, they punted the first entry, so we should do the same.
- See this upstream e-mail for more info:
- http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
- Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 188e94c370621708d13547d58dbc6ed3c5602aa8
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Tue Apr 8 16:20:35 2008 +0900
- cpu/mips/cpu.c: Fix flush_cache bug
- Cache operations have to take line address (addr), not start_addr.
- I noticed this bug when debugging ping failure.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Thu Apr 3 14:29:01 2008 +0200
- TQM5200: fix default IDE reset level
- Before the first call of ide_reset(), the level of the IDE reset
- signal on the TQM5200 is low (reset asserted). This patch sets the
- default value to high (reset not asserted).
- Currently this patch fixes no real problem, but it is cleaner to
- assert the reset signal only on demand, and not permanently.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit c61e033d6e8abb7b4060ee36060961e1399f6079
- Author: Detlev Zundel <dzu@denx.de>
- Date: Thu Apr 3 14:18:48 2008 +0200
- mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
- Author: Detlev Zundel <dzu@denx.de>
- Date: Thu Apr 3 14:18:47 2008 +0200
- mgcoge, mgsuv: rename 'addcon' to 'addcons'
- The latter name with 13 users is already established, so we will use
- that.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit e175eacc87c3a9e4dad0799fee0e95732520afc7
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Thu Apr 3 13:37:56 2008 +0200
- IDE: fix bug in reset sequence
- According to the ata (ata5) specification the RESET- signal
- shall be asserted for at least 25 us. Without this patch,
- the RESET- signal is asserted on some boards for only < 1 us
- (e. g. on the TQM5200). This patch adds a general delay of
- 25 us to the RESET- signal.
- Without this patch a Platinum 4 GiB CF card is not recognised
- properly on boards with a TQM5200 (STK52xx, TB5200).
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 813bea96a960916c72b4a3a7df840151529c26ce
- Author: Sascha Laue <Sascha.Laue@gmx.biz>
- Date: Thu Apr 3 14:43:11 2008 +0200
- lwmon5: disable CONFIG_ZERO_BOOTDELAY
- Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
- commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Apr 2 08:03:58 2008 +0200
- ds174x: Fix warning on return in rtc_get and rtc_set functions
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a253b38bf50c85227c33ca0febc870ee49d1588e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Apr 2 08:03:57 2008 +0200
- cmd_log.c: Fix assignment differ in signedness
- In function 'logbuff_init_ptrs':
- cmd_log.c:79: warning: pointer targets in assignment differ in signedness
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
- Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
- Date: Wed Apr 2 11:04:43 2008 +0530
- Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
- Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>
- commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Apr 1 14:07:10 2008 +0200
- s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c08fb3ea36d19b1640b7906264581e9105534399
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Tue Apr 15 10:24:14 2008 +0200
- Additional PCI IDs for IDE and network controllers
- These PCI IDs are required by the Linkstation platforms.
- Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- commit c0559be371b2a64b1a817088c3308688e2182f93
- Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
- Date: Mon Apr 14 23:01:50 2008 +0200
- Change env_get_char from a global function ptr to a function.
- This avoids an early global data reference.
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- commit 3e0f331c05d72f140715c1e9fca991927e44d422
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Apr 29 12:35:08 2008 +0000
- Clean up smsc911x driver
- Replace direct register address derefencing with accessor functions.
- Restrict explicitly 32-bit bus-width, extend affected configurations
- respectively.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Tue Apr 15 00:08:20 2008 -0400
- This patch adds a driver for the following smsc network controllers:
- LAN9115
- LAN9116
- LAN9117
- LAN9215
- LAN9216
- LAN9217
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 3dfd4aab929cccddb63d9ea509967861e1333b52
- Author: Sascha Laue <Sascha.Laue@gmx.biz>
- Date: Tue Apr 1 15:13:03 2008 +0200
- Fix watchdog POST for lwmon5
- If the hardware watchdog detects a voltage error, the watchdog sets
- GPIO62 to low. The watchdog POST has to detect this low level.
- Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
- commit 24b448448a917e52806f82660a5c9d47608894fb
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Apr 1 15:22:11 2008 +0800
- ata: update the libata.h from ata.h of linux kernel
- Current libata.h of u-boot is out of sync from linux kernel,
- this patch make it be consistent with linux kernel.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Tor Krill <tor@excito.com>
- commit f8f9dc98883f66f59eb0601da65808e6b139c87c
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Mar 31 11:59:27 2008 -0500
- Allow use of ARCH=powerpc when building
- The linux kernel is now mostly ARCH=powerpc, so to make life easier
- allow use to use ARCH=powerpc and convert it to ARCH=ppc.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Mar 31 10:40:54 2008 +0900
- Add apollon board MAINTAINERS entry
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 77e475cc0ed1832160017d364be32a0be9ff02a9
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Mar 31 10:40:36 2008 +0900
- Fix OneNAND read
- It should access with 16-bit instead of 8-bit
- Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit a9da2b41079d230db3a5641625311983f85ce1fb
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Mar 31 10:40:19 2008 +0900
- Fix OneNAND erase command
- It mis-calculates the block address.
- Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 61525f2ffa156665a66908fda47dbf29d65ea579
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Mon Mar 31 01:32:15 2008 +0200
- Support for LinkStation / KuroBox HD and HG PPC models
- This patch is based on the port by Mihai Georgian (see linkstation.c for
- Copyright information) and implements support for LinkStation / KuroBox HD
- and HG PPC models from Buffalo Technology, whereby HD is deactivated at
- the moment, pending network driver fixing.
- Notice to users: this is pretty much a barebone port. Support for network
- on HG models is already in the U-Boot mainline, but you might also want
- patches to switch fan / phy modes depending on the negotiated ethernet
- parameters. This patch also doesn't support console switching, booting EM
- mode, Buffalo specific ext2 magic number. So, if you want to use any of
- those, you need additional patches. Otherwise this patche provides a fully
- functional u-boot with a network console on your system.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Mar 30 01:22:13 2008 -0500
- Add CONFIG_MII_INIT support to related boards
- Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
- cmd_init.c. Add CONFIG_MII_INIT to board configuration files
- that use mii_init() in cmd_init.c.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: Ben Warren <biggerbadderben@gmail.com>
- commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Mar 30 01:19:06 2008 -0500
- Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
- Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
- CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit e99ccb488181d012248c6be30b2093e950319fc5
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Mar 27 11:46:38 2008 -0500
- Introduce phys_size_t and move phys_addr_t into asm/types.h
- Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
- that have larger physical addresses like 44x, 85xx, and 86xx.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 20a14a42a25f72e379f38460b8a8484667536795
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Apr 2 16:19:07 2008 -0500
- Rename include/md5.h to include/u-boot/md5.h
- Some systems have md5.h installed in /usr/include/. This isn't the
- desired file (we want the one in include/md5.h). This will avoid the
- conflict. This fixes the host tools building problem by creating a new
- directory for U-Boot specific header files.
- [Patch by Andy Fleming, modified to use separate directory by Wolfgang
- Denk]
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- Acked-by: Timur Tabi <timur@freescale.com>
- commit f297b7a1ec87433f66320d89d993e1bc738c66b8
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Mar 27 18:51:17 2008 +0800
- drivers: code clean up
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Mar 27 18:50:41 2008 +0800
- drivers: clean up the ata_piix.h
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit e8f7ba404f1409606962815ecc955a06984b08b3
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Mar 27 18:49:56 2008 +0800
- doc: english polishing for README.sata
- according to gvb's suggestion, polishing for the doc.
- Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 3e3f766a5274d204780460e1879723b565296d34
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Mar 26 18:53:28 2008 -0500
- Fix warnings introduced by I2C bus speed setting patch
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3c735e7437150e8615f26930c7819db85634276d
- Author: eran liberty <eran.liberty@gmail.com>
- Date: Thu Mar 27 00:50:49 2008 +0100
- Altera Stratix II support
- Adds Support for Altera's Stratix II.
- Within your board specific init file you will have to call
- 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
- 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
- Altera_desc* contines (for example):
- {
- Altera_StratixII, /* part type */
- passive_serial, /* interface type */
- 1, /* bytes of data part can accept */
- (void *)(&funcs), /* interface function table */
- 0L, /* base interface address */
- 0 /* implementation specific cookie */
- }
- funcs is the interface. It is of type altera_board_specific_func.
- It looks like this:
- altera_board_specific_func func = {
- pre_fn,
- config_fn,
- status_fn,
- done_fn,
- clk_fn,
- data_fn,
- abort_fn,
- post_fn,
- };
- you will have to implement these functions, which is usually bit
- banging some gpio.
- Signed-off-by: Eran Liberty <liberty@extricom.com>
- commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Apr 13 14:32:54 2008 -0700
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Wed Mar 26 20:41:17 2008 +0100
- Phytec Phycore-i.MX31 support
- This patch adds support for the Phytec Phycore-i.MX31 board
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Wed Mar 26 20:41:09 2008 +0100
- mx31 litekit support
- This patch adds support for the mx31 litekit board
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit cdace0661208754a53019ea0dc7b803a040e0939
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Wed Mar 26 20:40:49 2008 +0100
- add an i2c driver for mx31
- This patch adds an i2c driver for Freescale i.MX processors
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Wed Mar 26 20:40:42 2008 +0100
- core support for Freescale mx31
- This patch adds the core support for Freescale mx31
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 7ec68862a27c8f6f6d566228de8f6724d964a939
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Apr 13 14:19:23 2008 -0700
- Fix compile error
- ...as suggested by Peter Pearse
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Wed Mar 26 20:40:36 2008 +0100
- Separate omap24xx specific code from arm1136
- Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
- to cpu/arm1136/omap24xx.
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Jan 29 18:21:05 2008 -0500
- disable caches before booting an app for Blackfin apps
- It isn't generally save to execute applications outside of U-Boot with caches
- enabled due to the way the Blackfin processor handles caches (requires
- software assistance). This patch disables caches before booting an ELF or
- just booting raw code. The previous discussion on the patch was that we
- wanted to use weaks instead, but that proved to not be feasible when multiple
- symbols are involved, which puts us back at the ifdef solution. I've
- minimized the ugliness by moving the setup step outside of the main function.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Apr 13 10:03:54 2008 -0700
- ppc: Get rid of unused machine type definitions
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Apr 13 09:59:26 2008 -0700
- Coding Style cleanup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
- Author: Larry Johnson <lrj@acm.org>
- Date: Thu Feb 21 13:58:11 2008 -0500
- LM73 bug fix for negative temperatures and cleanup
- When the LM73 temperature sensor measures a temperature below 0 C, the
- current driver does not perform sign extension, so the result returned is
- 512 C too high. This patch fixes the problem, and does general cleanup
- of the code.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 96ef831f713289afba19da0c8f905e99da2b23e0
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Apr 3 13:36:02 2008 +0200
- cfi_flash: Support buffered writes on non-standard Spansion NOR flash
- Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
- series require different addresses for buffered write commands. Define a
- configuration option to support buffered writes on those chips. A more
- elegant solution would be to automatically detect those chips by parsing
- their CFI records, but that would require introduction of a fixup table
- into the cfi_flash driver.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
- Author: Lee Nipper <lee.nipper@freescale.com>
- Date: Thu Apr 10 09:35:06 2008 -0500
- mpc83xx: Update DIMM data bus width test to support 40-bit width
- 32-bit wide ECC memory modules report 40-bit width.
- Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
- Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5fb5a689d822ca61e814bd523fc930af335242fa
- Author: Dave Liu <r63238@freescale.com>
- Date: Mon Mar 31 17:05:12 2008 +0800
- mpc83xx: Fix the bug of serdes initialization
- Currently the serdes will not be initializated due to the
- partid's error.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 2000784818f043db7ca60e2846a72d097766b894
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Apr 3 16:28:29 2008 +0800
- mpc83xx: Fix the SATA clock setting of 837x targets
- Currently the SATA controller clock is configured as CSB clock,
- usually the CSB clock is 400/333/266MHz.
- However, The SATA IP block is only guaranteed to operate up to
- 200 MHz as stated in the HW spec.
- The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
- This patch makes the SATA clock as half of CSB clock.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Apr 2 13:41:21 2008 +0200
- mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Apr 9 04:20:57 2008 -0500
- 85xx: Fix detection of MP cpu spin up
- We were looking at the wrong memory offset to determine of a secondary
- cpu had been spun up or not. Also added a warning message if the
- all the secondary cpus we expect don't spin up.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f3e04bdc3f360c66801a9048956e61e41a16edba
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Apr 8 10:45:50 2008 -0500
- 85xx: Use SVR_SOC_VER instead of SVR_VER
- The recent change introduced by 'Update SVR numbers to expand support'
- now requires that we use SVR_SOC_VER instead of SVR_VER if we want
- to compare against a particular processor id.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
- Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
- Date: Fri Apr 11 10:00:35 2008 -0400
- ppc4xx: Fix power mgt definitions for PPC440
- Corrected DCR addresses of PPC440EP power management registers.
- Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
- commit 950a392464e616b4590bc4501be46e2d7d162dea
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 11 15:11:26 2008 +0200
- Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
- Reverting became necessary after it turned out that the patches in
- the u-boot-arm repo were modified, and in some cases corrupted.
- This reverts the following commits:
- 066bebd6353e33af3adefc3404560871699e9961
- 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
- c88ae20580b2b01487b4cdcc8b2a113f551aee36
- a147e56f03871bba4f05058d5e04ce7deb010b04
- d6674e0e2a6a1f033945f78838566210d3f28c95
- 8c8463cce44d849e37744749b32d38e1dfb12e50
- c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
- 8bf69d81782619187933a605f1a95ee1d069478d
- 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
- a574a73852a527779234e73e17e7597fd8128882
- 1377b5583a48021d983e1fd565f7d40c89e84d63
- 1704dc20917b4f71e373e2c888497ee666d40380
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Apr 11 07:02:29 2008 +0200
- ppc4xx: Update Kilauea defconfig to use device-tree booting as default
- This patch reworks the default environment on Kilauea/Haleakala. Now
- "net_nfs" for exmaple uses the device-tree style booting formerly know
- as "net_nfs_fdt". Also the addresses in RAM were changed because of the
- new image booting support, which check for image overwriting. So the
- addresses needed togeet adjusted.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 9 11:58:02 2008 +0200
- ppc4xx: Fix Canyonlands default environment to work with new image support
- Since the new image support checks for image overwriting, the default
- environment needs to get adjusted to use correct addresses.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit dfc6c7b647dba7ab86749616f0e9e5740deed422
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 9 11:54:11 2008 +0200
- ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
- The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
- closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
- on 4xx systems _start currently cannot be used for this calculation.
- So revert back to the original version for now.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f91374f65eae8b42cac329e06ba1c54728278efb
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 12:49:52 2008 +0100
- microblaze: Sort microblaze boards in MAKEALL script
- commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 11:58:45 2008 +0100
- microblaze: clean microblaze_config.mk
- FLAGS are generated by U-BOOT generator.
- Board specific FLAGS are in board directory
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 12:47:19 2008 +0100
- microblaze: xupv2p fix config file for supporting FDT
- commit 188dc16b189143573b1ed90e584bf866d75cdd12
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 11:53:02 2008 +0100
- microblaze: ml401 fix config file for supporting FDT
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 4c6a6f02e239236261333759997eeaf86b30b54c
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 11:22:48 2008 +0100
- microblaze: ml401 - add ifdef for GPIO
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 12:13:03 2008 +0100
- microblaze: clean uart16550 and uartlite handling
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 0b20f250877441460fb79d72192954abe8498834
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 11:08:31 2008 +0100
- microblaze: Add Emaclite driver to Makefile
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 868cde5310f88234b774878e4f06e79df10a88b3
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 11:08:01 2008 +0100
- microblaze: Add Emac driver to Makefile
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 12:42:29 2008 +0100
- microblaze: add Emac ethernet driver
- commit 89c53891b18cbafd29ab8931b40e27ad231b6085
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 12:41:56 2008 +0100
- microblaze: add Emaclite ethernet driver
- commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 11:04:01 2008 +0100
- microblaze: ML401 and XUPV2P remove emac and emaclite reference
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 10:59:32 2008 +0100
- microblaze: remove old setting for emac driver
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 28 10:58:15 2008 +0100
- microblaze: Clean Makefile from ancient emac driver
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit ab68f921d9c741830f721c3d879c13a0c5597183
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 10:20:43 2008 +0100
- SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 6ed8a43a19bb0275501bc286007daafa923552cf
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Mar 26 23:38:48 2008 +0100
- SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Mar 26 23:34:47 2008 +0100
- SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 10:06:52 2008 +0100
- SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Mar 26 23:26:48 2008 +0100
- SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 10:00:33 2008 +0100
- SPARC: Added support for SPARC LEON2 SOC Processor.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Mar 26 23:00:38 2008 +0100
- SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Mar 26 22:51:29 2008 +0100
- SPARC: Added support for SPARC LEON3 SOC processor.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit bf3d8b31169546fcddb4737391e1893fb12d033a
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 08:29:26 2008 +0100
- SPARC: added SPARC support for new uimage in common code.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 00ab32c85405a4fe65fd4128243086210fc90a21
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Wed Mar 26 22:36:03 2008 +0100
- SPARC: added SPARC board information to the command bdinfo.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit c2f02da21a3f37f0878554eebc785e04fdc4e128
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 09:47:00 2008 +0100
- SPARC: Added generic support for SPARC architecture.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit e54ec0f016803e4d9524ff71f7971bda0c51b287
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Apr 3 14:50:34 2008 +0200
- ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
- This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
- has 2 RGMII instances and we need to configure the 2nd RGMII instance
- for the EMAC2+3 channels.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c2a545ce33b26d80337f80b533828839249fb1c9
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Apr 2 08:03:56 2008 +0200
- MPC8xx: Fix libfdt support introduced in commit 77ff7b74
- fdt.c: In function 'ft_cpu_setup':
- fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
- fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
- fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
- fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Mar 31 20:45:56 2008 -0500
- Fix fdt set command to conform to dts spec
- The fdt set command was treating properties specified as <00> and <0011>
- as byte streams, rather than as an array of cells. As we already have
- syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
- we should use the <> syntax to describe arrays of cells, which are always
- 32-bits per element. If we imagine this likely (IMHO) scenario:
- > fdt set /ethernet-phy@1 reg <1>
- With the old code, this would create a bad fdt, since the reg cell would be
- made to be one byte in length. But the cell must be 4 bytes, so this would
- break mysteriously.
- Also, the dts spec calls for constants inside the angle brackets (<>)
- to conform to C constant standards as they pertain to base.
- Take this scenario:
- > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
- The old fdt command would complain that it couldn't parse that. Or, if you
- wanted to specify that a certain clock ran at 33 MHz, you'd be required to
- do this:
- > fdt set /mydev clock <1f78a40>
- Whereas the new code will accept decimal numbers.
- While I was in there, I extended the fdt command parser to handle property
- strings which are split across multiple arguments:
- > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
- > fdt p /ethernet@f00
- ethernet@f00 {
- interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
- };
- Lastly, the fdt print code was rearranged slightly to print arrays of cells
- if the length of the property is a multiple of 4 bytes, and to not print
- leading zeros.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 2 08:39:33 2008 +0200
- ppc4xx: Canyonlands: Init SATA/PCIe port correctly
- Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
- interface. This usage can be configured with the jumper J6. This patch
- correctly configures the SATA/PCIe PHY for SATA usage when this jumper
- is installed.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6fe2946f198481254a6ee9600d7456b8316a4083
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Mar 28 17:37:49 2008 -0500
- remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
- finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
- "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
- started.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b5873f1732b92a25690e1513b90dfb0d644f6697
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Apr 1 07:30:51 2008 +0200
- dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2d934ea51f276522b532f870a820e844ff480b5b
- Author: Tor Krill <tor@excito.com>
- Date: Fri Mar 28 15:29:45 2008 +0100
- Add Vitesse 8601 support to TSEC driver
- Add phy_info for Vitesse VSC8601.
- Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
- Signed-off-by: Tor Krill <tor@excito.com>
- Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Mon Mar 31 14:25:00 2008 +0000
- SPARC: added SMC91111 driver in and out macros for LEON processors.
- This patch makes SPARC/LEON processors able to read and write
- to the SMC91111 chip using the chip external I/O bus of the memory
- controller. This patchs defines the standard in and out macros
- expected by the SMC9111 driver.
- To access that I/O bus one must set up the memory controller
- (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
- up this correctly when the other MCTRL parameters are set up. It
- can be set up from the board configuration header file.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 18:52:34 2008 +0100
- Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Mar 31 21:31:04 2008 +0200
- AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 18:52:33 2008 +0100
- Add support for AT91SAM9260EK
- Support for booting from internal DataFlash, external DataFlash card
- or NAND flash is available.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 1762f13b4aab88b685b1722f17dada247945624b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Mar 31 21:20:49 2008 +0200
- AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 761712188b353494defb2b644491ff73d0daaa6f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Mar 31 21:12:17 2008 +0200
- AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 20:52:32 2008 +0100
- Port AT91CAP9 to the new headers
- Adapt the existing AT91CAP9 code to the new headers and APIs.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 19:52:31 2008 +0100
- Finish header files reworking
- Replace AT91CAP9.h file with several splitted header files coming
- from the Linux kernel.
- This is part 2 of the replacement: more header imports and edits.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 19:52:30 2008 +0100
- Import several header files from Linux
- Replace AT91CAP9.h file with several splitted header files coming
- from the Linux kernel.
- This is part 1 of the replacement: pristine header files import.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit a8a78f2d99dc1bd30dc3595da118539b506c6118
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 20:52:28 2008 +0100
- Move at91cap9 specific files to at91sam9 directory
- AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
- common infrastructure can be used. Let this infrastructure be
- named after the AT91SAM9 family, and move the existing AT91CAP9
- files to the new place.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 61106a565870ff503f92b251b94bd7afef889a04
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 21:52:27 2008 +0100
- Use timer_init() instead of board supplied interrupt_init()
- The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
- the board, so use timer_init() instead of interrupt_init().
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 21:52:36 2008 +0100
- Cleanup DataFlash partition handling
- DataFlash partition information has become a mess. This patch
- defines a single partition scheme for Atmel DataFlashes. This partition
- scheme will be used by all AT91CAP9 and AT91SAM9 boards.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Fri Mar 28 08:47:45 2008 -0500
- ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
- When the version_string function in start.S is not 4-byte align,
- it will cause the compiler generates "unaligned opcodes detected
- in executable segment". This issue affects all ColdFire CPUs.
- By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
- it is not aligned.
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit bae61eefe15b4d454060a7140e49ae58322be803
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Mar 25 15:41:15 2008 -0500
- ColdFire: Add dspi and serial flash support for MCF5445x
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit 48ead7a7a922fceaf494e352abfab8216a41b417
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Mar 18 17:37:01 2008 -0500
- ColdFire: Remove R5200 board
- This board never went into production
- Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
- Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
- Author: Matthew Fettke <[matthew.fettke@gmail.com]>
- Date: Thu Jan 24 14:02:32 2008 -0600
- ColdFire: Added M5275EVB support.
- Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
- Author: Matthew Fettke <[matthew.fettke@gmail.com]>
- Date: Mon Feb 4 15:38:20 2008 -0600
- ColdFire: Added MCF5275 cpu support.
- Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Mar 17 12:14:11 2008 -0500
- ColdFire: Define bootdelay in configuration file for M52277EVB
- Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
- Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit 77878f16cedee17161ff2336990970fffc6cea35
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Mar 17 12:09:07 2008 -0500
- ColdFire: Fix second memory Chipselect for M5475EVB
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit 43d60642395a550956cb21d287c8cfa563913d28
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Mar 13 14:26:32 2008 -0500
- ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Acked-by: John Rigby <jrigby@freescale.com>
- commit eb14ebe813a0cb5d47905228da446a5ad692473b
- Author: Larry Johnson <lrj@acm.org>
- Date: Sun Mar 30 20:33:04 2008 -0500
- ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 02e3892021112f21067d9ed1d04ae4182725ba52
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Mar 31 12:20:48 2008 +0200
- ppc4xx: Small whitespace fix of esd patches
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 034394abb524785047c815f00dde8cdbdc1593c5
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Sun Mar 30 18:52:44 2008 +0200
- ppc4xx: Cleanup PMC440 board support
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit a6cc6c37188d85c25d167a4515da86f48d9a583e
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Sun Mar 30 18:52:06 2008 +0200
- ppc4xx: Add ptm configuration variables for PMC440
- Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
- environment variables.
- Cleanup pci_target_init.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 7c91f51a2fe296909147f1646a1412729dd10b1d
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Sun Mar 30 18:01:15 2008 +0200
- ppc4xx: Minor updates for DU440 boards
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit d5bffeb868d6b4d462f558dac43011027b6644b7
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Feb 19 00:54:20 2008 -0500
- Blackfin: cleanup and overhaul common board init functions
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit b86b3416f874358acaf07519e7620cdb2145f75b
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Feb 19 00:50:58 2008 -0500
- Blackfin: cleanup lib_blackfin/cache.c
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sun Mar 30 15:46:13 2008 -0400
- Blackfin: unify cpu and boot modes
- All of the duplicated code for Blackfin processors and boot modes have been
- unified. After all, the core is the same for all processors, just the
- peripheral set differs (which gets handled in the drivers).
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 880cc4381ea8360248cddcdf87a64566745a5724
- Author: Stelian Pop <stelian@popies.net>
- Date: Wed Mar 26 22:52:35 2008 +0100
- Fix CFG_NO_FLASH compilation.
- Many Atmel boards have no "real" (NOR) flash on board, and rely only
- on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
- be present in a board configuration file, while still enabling flash
- commands like 'flinfo', 'protect', etc.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Feb 19 00:58:13 2008 -0500
- Blackfin: BF537-stamp: cleanup spi flash driver
- This punts the old spi flash driver for a new/generalized one until the
- common one can be integrated.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sun Mar 30 11:34:34 2008 -0400
- Fix macro typo in common/cmd_mii.c
- This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
- actually applied the wrong patch.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Mar 30 16:39:53 2008 +0200
- use correct at91rm9200 register name in m501sk board
- This fixes a naming bug for at91rm9200 lowlevel init code:
- NOR boot flash is on chipselect 0, not chipselect 2. This
- makes code use the register name from chip datasheets.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
- Author: David Brownell <david-b@pacbell.net>
- Date: Fri Jan 18 12:55:00 2008 -0800
- use correct at91rm9200 register name
- This fixes a naming bug for at91rm9200 lowlevel init code:
- NOR boot flash is on chipselect 0, not chipselect 2. This
- makes code use the register name from chip datasheets.
- Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
- commit a3543d6dc52b0ba9c64016687cf32d600b31a476
- Author: David Brownell <david-b@pacbell.net>
- Date: Fri Jan 18 12:45:45 2008 -0800
- add missing ARM boards to MAKEALL
- Add some missing ARM boards to MAKEALL. These build correctly,
- unlike several of the boards already listed.
- Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
- commit 066bebd6353e33af3adefc3404560871699e9961
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Sun Mar 30 11:34:09 2008 +0100
- Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
- to prevent compilation error.
- Signed-off-by: Peter Pearse <peter.pearse@arm.com>
- commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
- Author: Guennadi Liakhovetski <[lg@denx.de]>
- Date: Sun Mar 30 11:32:30 2008 +0100
- Support for the MX31ADS evaluation board from Freescale
- This patch adds support for the MX31ADS evaluation board from Freescale,
- initialization code is copied from RedBoot sources, also provided by Freescale.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Sun Mar 30 11:32:27 2008 +0100
- Phytec Phycore-i.MX31 support
- This patch adds support for the Phytec Phycore-i.MX31 board
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit a147e56f03871bba4f05058d5e04ce7deb010b04
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Sun Mar 30 11:32:24 2008 +0100
- mx31 litekit support
- This patch adds support for the mx31 litekit board
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit d6674e0e2a6a1f033945f78838566210d3f28c95
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Sun Mar 30 11:32:21 2008 +0100
- add SMSC LAN9x1x Network driver
- This patch adds a driver for the following smsc network controllers:
- LAN9115
- LAN9116
- LAN9117
- LAN9215
- LAN9216
- LAN9217
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 8c8463cce44d849e37744749b32d38e1dfb12e50
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Sun Mar 30 11:32:16 2008 +0100
- add an i2c driver for mx31
- This patch adds an i2c driver for Freescale i.MX processors
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Sun Mar 30 11:30:43 2008 +0100
- core support for Freescale mx31
- This patch adds the core support for Freescale mx31
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 8bf69d81782619187933a605f1a95ee1d069478d
- Author: Sascha Hauer <s.hauer@pengutronix.de>
- Date: Sun Mar 30 11:28:46 2008 +0100
- Separate omap24xx specific code from arm1136
- Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Sun Mar 30 11:23:05 2008 +0100
- Add pmdra into MAKEALL
- Signed-off-by: Peter Pearse <peter.pearse@arm.com>
- commit a574a73852a527779234e73e17e7597fd8128882
- Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
- Date: Sun Mar 30 11:21:58 2008 +0100
- Adds support for the Prodrive PMDRA board, based on a DM6441
- Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
- commit 1377b5583a48021d983e1fd565f7d40c89e84d63
- Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
- Date: Sun Mar 30 11:11:34 2008 +0100
- Removes all board specific code from the arch. part for DM644x (DaVinci) boards
- Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
- commit 1704dc20917b4f71e373e2c888497ee666d40380
- Author: Dirk Behme <dirk.behme@gmail.com>
- Date: Sun Mar 30 11:09:01 2008 +0100
- - Remove *_masked() functions as noted by Wolfgang
- - Adapt register naming to recent TI spec (sprue26, March 2007)
- - Fix reset_timer() handling
- - As reported by Pieter [1] the overflow fix introduced a
- delay of factor 16 (e.g 2 seconds became 32). While the
- overflow fix is basically okay, it missed to divide udelay by
- 16, too. Fix this.
- [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
- - Remove software division of timer count value (DIV(x)
- macro) and do it in hardware (TIM_CLK_DIV).
- Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
- and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
- the hints & testing!
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
- commit ac3315c26e143c31680750c9c13f027efbcc887e
- Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Date: Thu Mar 6 16:45:44 2008 +0100
- new PHY @ e1000 - 2nd try
- Add 82541ER device with latest integrated IGP2 PHY.
- Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 20:22:53 2008 +0100
- SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
- GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
- a debug link (EDCL). The GRETH core is documented in GRIP.pdf
- available at www.gaisler.com.
- If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
- offloading etc.) can be determined by a bit in the control register.
- The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 233a8bcd94997f3f345833a3b82e836222f2a206
- Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Mar 17 17:08:22 2008 -0500
- Add CONFIG_MII_INIT in cmd_mii.c
- Provide common configuration in do_mii() to execute mii_init()
- for all cpu architectures
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit f605479de2deb11e834f31dfdb0af107c86aced6
- Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Mar 17 17:08:16 2008 -0500
- ColdFire: Fix FEC transmit issue for MCF5275
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
- Author: Aras Vaichas <arasv@magtech.com.au>
- Date: Wed Mar 26 09:43:57 2008 +1100
- DHCP request fix for Windows Server 2003
- Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
- delay before sending "DHCP Request" in net/bootp.c. Required to overcome
- interoperability problems with Windows Server 200x DHCP server when U-Boot
- client responds too fast for server to handle.
- Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 97bf85d784fbed485e652eb907589ad0d5cb7262
- Author: Daniel Hellstrom <daniel@gaisler.com>
- Date: Fri Mar 28 20:40:19 2008 +0100
- MTD/CFI: flash_read64 is defined a weak function (for SPARC)
- SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
- SPARC CPUs implement flash_read64 which calls __raw_readq.
- For current SPARC architectures (LEON2 and LEON3) each read from the
- FLASH must lead to a cache miss. This is because FLASH can not be set
- non-cacheable since program code resides there, and alternatively disabling
- cache is poor from performance view, or doing a cache flush between each
- read is even poorer.
- Forcing a cache miss on a SPARC is done by a special instruction "lda" -
- load alternative space, the alternative space number (ASI) is processor
- implementation spcific and can be found by including <asm/processor.h>.
- Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
- commit 70431e8a7393b6b793f77957f95b999fc9a269b8
- Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Date: Fri Mar 28 15:41:25 2008 +0100
- Make MPC83xx one step closer to full relocation.
- Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
- and use GOT relative reference.
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5b2793a3f3de34d439232b05acc8af67a028fd35
- Author: Michael Barkowski <michael.barkowski@freescale.com>
- Date: Thu Mar 27 14:34:43 2008 -0400
- mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
- This patch fixes eeprom page size so that you can now write more than
- 64 bytes at a time.
- It also makes the board take MAC addresses, if found, from EEPROM.
- User should place up to 4 addresses at offset 0x7f00, for
- eth{,1,2,3}addr. Any unused addresses should be zero. This group of
- four six-byte values should have it's CRC at the end. crc32 and
- eeprom commands can be used to accomplish this.
- If CRC fails, MAC addresses come from the environment. If CRC
- succeeds, the environment is overwritten at startup.
- Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8f325cff31f6e745e6540014b131b9a97f61944c
- Author: Michael Barkowski <michael.barkowski@freescale.com>
- Date: Fri Mar 28 15:15:38 2008 -0400
- mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
- Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
- controller on the PCI bus in Linux on the MPC8323ERDB.
- This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
- config file.
- Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Mar 28 10:19:07 2008 -0500
- mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
- in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
- 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
- and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
- REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
- convenience macros.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Mar 28 10:18:53 2008 -0500
- mpc83xx: display ddr frequency in board_add_ram_info banner
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Mar 28 10:18:40 2008 -0500
- mpc83xx: unreinvent mem_clk
- delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
- mem_*_clk for consistency's sake.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Mar 28 14:31:23 2008 -0500
- mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:57:19 2008 +0800
- mpc83xx: enable the SATA interface on mpc837xemds board
- Enable the first two SATA interfaces on MPC837xEMDS board,
- The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:56:36 2008 +0800
- mpc83xx: initialize serdes for MPC837xEMDS boards
- This patch is stolen from Anton Vorontsov's patch
- for mpc837xerdb boards.
- The reference clk and xcorevdd voltage of serdes1/2
- is same between mpc837xemds and mpc837xerdb.
- 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
- 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
- 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit cc8e839abc80887ae832767b5930d40edd6d7eb7
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Mar 28 14:09:04 2008 +0100
- ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
- Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
- interface. This usage can be configured with the jumper J6. This patch
- displays the current configuration upon bootup and changes the PCIe
- init loop, to only initialize the availabel PCIe slots.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 90447ecbbac8572457b6d8903073ac3f120995ba
- Author: Tor Krill <tor@excito.com>
- Date: Fri Mar 28 11:29:10 2008 +0100
- MTD/CFI: Add support for 16bit legacy AMD flash
- Add entry for 512Kx16 AMD flash to jedec_table.
- Read out 16bit device id if chipwidth is 16bit.
- Fixed coding style after Stefans feedback
- Signed-off-by: Tor Krill <tor@excito.com>
- commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Mar 28 11:02:53 2008 +0100
- ppc: Small change to CFG_MEM_TOP_HIDE description
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Mar 27 15:44:12 2008 +0900
- sh: Add support stat structure and stat.h
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
- Author: Mark Jonas <toertel@gmail.com>
- Date: Sat Mar 22 19:27:52 2008 +0100
- sh: Removed warning when compiling drivers/serial/serial_sh.c.
- Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit f309fa38929ffba71230c02330ffa42f4bba6333
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Mar 12 18:02:57 2008 +0900
- sh: Remove disable_ctrlc function from R7780MP
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Mar 12 17:55:15 2008 +0900
- sh: Add maintainer of R7780MP to MAINTAINER file
- Update MAINTAINER entry for R7780MP. And fix maintainer's name.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit f5e2466f7baa887a7df0c536333eea8231333497
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Mar 25 17:11:24 2008 +0900
- sh: Add support Renesas Solutions R2D plus board
- R2D plus is SH reference board used with SH7751R.
- This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
- one PCI bus, VGA, and two Ethernet controller.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit e92c95180bb5bc5fd4051598a9d60beaba48988d
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Mar 12 12:15:29 2008 +0900
- sh: Add support SH4 cache control
- Add support SH4 cache control and flash_cache function
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 28e5efde4d925fcb34901d0030d0648de2da7e89
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Mon Mar 24 01:53:01 2008 +0900
- sh: Add support PCI host driver for SH7751/SH7751R
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Mon Mar 24 02:11:26 2008 +0900
- sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 566933278101c144d75361ea682678a326c1290d
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Mar 12 12:10:28 2008 +0900
- sh: Add support SuperH SH7751/SH7751R
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 3313e0e26224fc9a0c445124f3455058c696df84
- Author: Mark Jonas <toertel@gmail.com>
- Date: Mon Mar 10 11:37:10 2008 +0100
- sh: Added support for SH7720 based board MPR2.
- Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Mar 6 14:05:53 2008 +0900
- sh: Fix receive FIFO level register of SH4A
- Receive FIFO level register is different in SH4A.
- Because register is different, cannot occasionally receive data.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit c133c1fb0b590662206b0eba70f4478ee0300a9a
- Author: Yusuke Goda <goda.yusuke@renesas.com>
- Date: Tue Mar 11 12:55:12 2008 +0900
- sh: Add support Renesas Solutions R7780MP
- Renesas Solutions R7780MP is a reference board on SH7780.
- This board has serial, 10/100 base Ethernet deivice, CF slot
- and VGA devices. This board can set extension board.
- Extension board has 10/100/1000 base Ethernet device, PCI slot,
- S-ATA, iDVR slot.
- Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
- Author: Yusuke Goda <goda.yusuke@renesas.com>
- Date: Wed Mar 5 14:30:02 2008 +0900
- sh: Add support PCI of SuperH and SH7780
- This patch add support PCI of SuperH base code and SH7780 specific code.
- Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit b55523efff2ae11f0b9ae3cc405893c32eb78156
- Author: Yusuke Goda <goda.yusuke@renesas.com>
- Date: Wed Mar 5 14:23:26 2008 +0900
- sh: Add support SH7780
- SH7780 is CPU of Renesas Technology.
- This CPU has
- - CPU clock 400MHz
- - PCI support
- - DDR-SDRAM controller
- - etc ...
- Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit c2042f5952a686c414031309b8f244513bf578f0
- Author: goda.yusuke <goda.yusuke@renesas.com>
- Date: Fri Jan 25 20:46:36 2008 +0900
- sh: Add support Renesas Solutions Migo-R board
- Migo-R is a board based on SH7722 and has may devices.
- In this patch, supported SCIF, NOR flash and Ethernet.
- Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 27 15:06:40 2008 +0100
- Fix host tool build breakage, take two
- Revert commit 87c8431f and fix build breakage so that the build continues
- to work on FC systems.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 19 09:36:47 2008 +0100
- ppc4xx: Enable ECC on LWMON5
- Since all ECC related problems seem to be resolved on LWMON5, this patch
- now enables ECC support.
- We have to write the ECC bytes by zeroing and flushing in smaller
- steps, since the whole 256MByte takes too long for the external
- watchdog.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
- Author: Larry Johnson <lrj@acm.org>
- Date: Mon Mar 17 11:10:35 2008 -0500
- ppc4xx: Updates to Korat-specific code
- This patch contains updates for changes for the Korat PPC440EPx board.
- These changes include:
- (1) Support for "permanent" and "upgradable" copies of U-Boot, as
- described in the new "doc/README.korat" file;
- (2) a new memory map for the registers in the board's CPLD;
- (3) a revised format for manufacturer's data in serial EEPROM; and
- (4) changes to track updates to U-Boot for the Sequoia board.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit f766cdf89b3a2a7634b8c5869f606150e332036c
- Author: Markus Brunner <super.firetwister@gmail.com>
- Date: Thu Mar 27 10:46:25 2008 +0100
- ppc4xx: PPC405EP Set EMAC noise filter bits
- This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
- which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
- disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
- Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
- Author: Mike Nuss <mike@terascala.com>
- Date: Wed Feb 20 11:54:20 2008 -0500
- ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
- On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
- after startup to change the speed of the clocks. This patch adds the
- option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
- initialization code will reconfigure the PLL to run the system with a CPU
- frequency of 667MHz and PLB frequency of 166MHz, without the need for an
- external EEPROM.
- Signed-off-by: Mike Nuss <mike@terascala.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
- Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- Date: Thu Mar 27 09:12:40 2008 +0100
- new-image: Fix host tool build breakage
- Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
- commit 6fb4b640562a10daff0dbe537638d511b5b48650
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 27 10:24:03 2008 +0100
- ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9462732a3ec551c11862450902cd8ee1bedea6d9
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 19 10:23:43 2008 +0100
- ppc4xx: Add fdt support to Prodrive alpr
- Since this board will probably be ported to arch/powerpc in the
- near future, we add device tree support now. This way we are
- "ready" for arch/powerpc from now on.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
- Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
- Date: Mon Mar 17 09:27:56 2008 +0100
- ppc4xx: Enable cache support on the ALPR board
- Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
- commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 26 10:14:11 2008 +0100
- ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
- If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
- memory area will get subtracted from the top (end) of ram and won't get
- "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
- should gets passed the now "corrected" memory size and won't touch it
- either. This should work for arch/ppc and arch/powerpc. Only Linux board
- ports in arch/powerpc with bootwrapper support, which recalculate the
- memory size from the SDRAM controller setup, will have to get fixed
- in Linux additionally.
- This patch enables this config option on some PPC440EPx boards as a workaround
- for the CHIP 11 errata. Here the description from the AMCC documentation:
- CHIP_11: End of memory range area restricted access.
- Category: 3
- Overview:
- The 440EPx DDR controller does not acknowledge any
- transaction which is determined to be crossing over the
- end-of-memory-range boundary, even if the starting address is
- within valid memory space. Any such transaction from any PLB4
- master will result in a PLB time-out on PLB4 bus.
- Impact:
- In case of such misaligned bursts, PLB4 masters will not
- retrieve any data at all, just the available data up to the
- end of memory, especially the 440 CPU. For example, if a CPU
- instruction required an operand located in memory within the
- last 7 words of memory, the DCU master would burst read 8
- words to update the data cache and cross over the
- end-of-memory-range boundary. Such a DCU read would not be
- answered by the DDR controller, resulting in a PLB4 time-out
- and ultimately in a Machine Check interrupt. The data would
- be inaccessible to the CPU.
- Workaround:
- Forbid any application to access the last 256 bytes of DDR
- memory. For example, make your operating system believe that
- the last 256 bytes of DDR memory are absent. AMCC has a patch
- that does this, available for Linux.
- This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
- lwmon5, korat, sequoia
- The other remaining 440EPx board were intentionally not included
- since it is not clear to me, if they use the end of ram for some
- other purpose. This is unclear, since these boards have CONFIG_PRAM
- defined and even comments like this:
- PMC440.h:
- /* esd expects pram at end of physical memory.
- * So no logbuffer at the moment.
- */
- It is strongly recommended to not use the last 256 bytes on those
- boards too. Patches from the board maintainers are welcome.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 27 10:09:05 2008 +0100
- ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d56a3ce179688cde61073a3690e21703d68fafd7
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 25 17:51:13 2008 +0100
- ppc4xx: Correctly pass phyiscal FLASH base address into dtb
- The routine ft_board_setup() configures the EBC NOR mappings for the
- Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
- 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
- problem, we need to pass the corrected address here too.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9ad31989de12ce5c67b07c4867ead47465655c4b
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 19 16:35:12 2008 +0100
- ppc4xx: Fix compilation warning in 4xx_enet.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 19 16:20:49 2008 +0100
- ppc4xx: Add AMCC Glacier 406GT eval board support
- This patch adds support for the AMCC Glacier 460GT eval board.
- The main difference to the Canyonlands board are listed here:
- - 4 ethernet ports instead of 2
- - no SATA port
- - no USB port
- Currently EMAC2+3 are not working. This will be fixed in a later
- release.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 27 08:47:26 2008 +0100
- ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b9670dd85be6e0496ef2e231043c23cad9b1d903
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Mar 26 21:05:43 2008 +0100
- Fix out of tree building issue
- Currently U-Boot building in some external directory
- doesn't work. This patch tries to fix the problem.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Mar 26 18:13:33 2008 +0100
- README: update documentation (availability, links, etc.)
- Fix typo in README
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Mar 26 17:47:44 2008 +0100
- Fix compilation error in cmd_usb.c
- This patch fixes compilation error
- cmd_usb.c: In function 'do_usb':
- cmd_usb.c:552: error: void value not ignored as it ought to be
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit d8c82db482d6b535d12b419d6440b88bf7091c9b
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Mar 14 17:45:29 2008 -0500
- Add support for setting the I2C bus speed in fsl_i2c.c
- Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
- the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
- but fsl_i2c.c ignores it and uses conservative value when programming the
- I2C bus speed.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Mar 27 00:03:57 2008 +0100
- Coding style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:55:32 2008 +0800
- drivers: add the support for Freescale SATA controller
- Add the Freescale on-chip SATA controller driver to u-boot,
- The SATA controller is used on the 837x and 8315 targets,
- The driver can be used to load kernel, fs and dtb.
- The features list:
- - 1.5/3 Gbps link speed
- - LBA48, LBA28 support
- - DMA and FPDMA support
- - Two ports support
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:54:44 2008 +0800
- ata: add the readme for SATA command line
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit cd54081cd479e542fc399b8a40651ff11a1ad849
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:53:24 2008 +0800
- ata: enable the sata initialize on boot up
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:52:36 2008 +0800
- ata: add the fis struct for SATA
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:51:44 2008 +0800
- ata: add the libata support
- add simple libata support in u-boot
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 8e9bb43429e50df55fa41932cbe65841ff579220
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:50:45 2008 +0800
- ata: make the ata_piix driver using new SATA framework
- original ata_piix driver is using IDE framework, not real
- SATA framework. For now, the ata_piix driver is only used
- by x86 sc520_cdp board. This patch makes the ata_piix driver
- use the new SATA framework, so
- - remove the duplicated command stuff
- - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
- - add the CONFIG_CMD_SATA define to sc520_cdp.h
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:49:44 2008 +0800
- ata: add the support for SATA framework
- - add the SATA framework
- - add the SATA command line
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:48:18 2008 +0800
- ata: merge the header of ata_piix driver
- move the sata.h from include/ to drivers/block/ata_piix.h
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 9eef62804d9695425b24c87b46a61a7fa74afee0
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Mar 26 22:47:06 2008 +0800
- ata: merge the ata_piix driver
- move the cmd_sata.c from common/ to drivers/ata_piix.c,
- the cmd_sata.c have some part of ata_piix controller drivers.
- consolidate the driver to have better framework.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Mar 26 18:26:43 2008 +0100
- USB, Storage: fix a bug introduced in commit
- f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
- to only print only information on one storage device, but not for
- multiple.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Wed Mar 26 17:47:44 2008 +0100
- Fix compilation error in cmd_usb.c
- This patch fixes compilation error
- cmd_usb.c: In function 'do_usb':
- cmd_usb.c:552: error: void value not ignored as it ought to be
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Mar 26 08:53:53 2008 -0500
- 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
- Provide a board_lmb_reserve helper function to ensure we reserve
- the page of memory we are using for the boot page translation code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 79679d80021ab095e639e250ca472fe526da02e2
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Mar 26 08:34:25 2008 -0500
- 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
- The following changes are needed to be inline with ePAPR v0.81:
- * r4, r5 and now always set to 0 on boot release
- * r7 is used to pass the size of the initial map area (IMA)
- * EPAPR_MAGIC value changed for book-e processors
- * changes in the spin table layout
- * spin table supports a 64-bit physical release address
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 25eedb2c1958a13110c7de1fc809b624053cc69c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 19 15:02:07 2008 -0500
- FSL: Clean up board/freescale/common/Makefile
- Each file that can be built here now follows some
- CONFIG_ option so that they are appropriately built
- or not, as needed. And CONFIG_ defines were added
- to various board config files to make sure that happens.
- The other board/freescale/*/Makefiles no longer need
- to reach up and over into ../common to build their
- individually needed files any more.
- Boards that are CDS specific were renamed with cds_ prefix.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 22:00:27 2008 -0600
- 85xx: Fix merge duplication
- ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5893b3d0a4084f87a06a5d3dc03db91206818941
- Author: James Yang <James.Yang@freescale.com>
- Date: Tue Feb 12 16:35:07 2008 -0600
- 85xx: Expand CCSR space with more DDR controller registers.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
- Author: James Yang <James.Yang@freescale.com>
- Date: Fri Feb 8 18:05:08 2008 -0600
- 85xx: Speed up get_ddr_freq() and get_bus_freq()
- get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
- called. However, get_sys_info() recalculates extraneous information when
- called each time. Have get_ddr_freq() and get_bus_freq() return memoized
- values from global_data instead.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e9ea679918fbc9a53fa2f2a904aac874ea736036
- Author: James Yang <James.Yang@freescale.com>
- Date: Fri Feb 8 16:46:27 2008 -0600
- 85xx: Show DDR memory data rate in addition to the memory clock frequency.
- Show the DDR memory data rate in addition to the memory clock
- frequency. For DDR/DDR2 memories the memory data rate is 2x the
- memory clock.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 591933ca6eabc440e6ed6967233aaf56fce464a3
- Author: James Yang <James.Yang@freescale.com>
- Date: Fri Feb 8 16:44:53 2008 -0600
- 85xx: get_tbclk() speed up and rounding fix
- Speed up get_tbclk() by referencing pre-computed bus clock
- frequency value from global data instead of sys_info_t. Fix
- rounding of result to nearest; previously it was rounding
- upwards.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Feb 6 01:19:40 2008 -0600
- Update SVR numbers to expand support
- FSL has taken to using SVR[16:23] as an SOC sub-version field. This
- is used to distinguish certain variants within an SOC family. To
- account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
- constants to reflect the larger value. We also add SVR numbers for all
- of the current variants. Finally, to make things neater, rather than
- use an enormous switch statement to print out the CPU type, we create
- and array of SVR/name pairs (using a macro), and print out the CPU name
- that matches the SVR SOC version.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Feb 6 01:12:57 2008 -0600
- Add the Freescale PCI device IDs
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Feb 14 11:04:23 2008 -0600
- 85xx: Added support for multicore boot mechanism
- Added the cpu command that provides a generic mechanism to get status,
- reset, and release secondary cores in multicore processors.
- Added support for using the ePAPR defined spin-table mechanism on 85xx.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 16:48:33 2008 -0600
- 85xx: Added support for multicore boot mechanism
- Added the cpu command that provides a generic mechanism to get status,
- reset, and release secondary cores in multicore processors.
- Added support for using the ePAPR defined spin-table mechanism on 85xx.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f69766e4b5d47ecd3aa58677a8da875694f364f2
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 30 14:55:14 2008 -0600
- 85xx: Add the concept of CFG_CCSRBAR_PHYS
- When we go to 36-bit physical addresses we need to keep the concept of
- the physical CCSRBAR address seperate from the virtual one.
- For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Mar 26 15:38:47 2008 +0100
- Coding style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
- Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Date: Wed Mar 26 13:02:13 2008 +0100
- Add CFG_RTC_DS1337_NOOSC to turn off OSC output
- The default settings for RTC DS1337 keeps the OSC
- output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
- turn it off.
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Mar 26 11:48:46 2008 +0100
- Cleanup coding style, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Mar 26 10:40:12 2008 +0100
- README: update documentation (availability, links, etc.)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
- Author: Aras Vaichas <arasv@magtech.com.au>
- Date: Tue Mar 25 12:09:07 2008 +1100
- USB Storage, add meaningful return value
- This patch changes the "usb storage" command to return success if it
- finds a USB storage device, otherwise it returns error.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 18e69a35efbb078403db0c0063986470dad7d082
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Fri Mar 14 23:20:18 2008 +0300
- 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
- Linux understands "host" (default), "peripheral" and "otg" (broken).
- Though, U-Boot doesn't restrict dr_mode variable to these values (think
- of renames in future).
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c7604783b236e368f225efb7b3efb418fe20b404
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Fri Mar 14 23:20:30 2008 +0300
- tsec: fix link detection for the RTL8211B PHY
- RTL8211B sets link state register after autonegotiation complete,
- so with bootdelay=0 RTL8211B will report lack of the link.
- To fix this, we should wait for aneg to complete, even if the
- link is currently down.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:47:09 2008 +0300
- mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
- device_type = "soc" is being deprecated, newer device trees will use
- "fsl,soc" and/or "fsl,immr" for the soc nodes.
- This patch also adds clock-frequency property for soc nodes (the same
- value as bus-frequency).
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
- Author: Joe D'Abbraccio <ljd015@freescale.com>
- Date: Mon Mar 24 13:00:59 2008 -0400
- Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
- With the original value of 1/2 clock cycle delay, the system ran relatively
- stable except when we run benchmarks that are intensive users of memory.
- When I run samba connected disk with a HDBENCH test, the system locks-up
- or reboots sporadically.
- Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
- commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Mar 24 12:44:13 2008 -0500
- mpc83xx: Set PCI I/O bus-address base to zero.
- The device trees for these boards describe PCI I/O as starting from
- address zero from the device's perspective.
- Placing I/O elsewhere may cause problems with certain PCI boards, and may
- cause problems with Linux.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:47:05 2008 +0300
- mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
- At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
- This patch fixes "system time drifting" problem.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:47:02 2008 +0300
- mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
- This is needed to update /choosen/linux,stdout-path properly.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:47:00 2008 +0300
- mpc83xx: MPC8360E-RDK: add dhcp command
- Plus modify environment to use it and remove bootfile env variable,
- it is internal and CONFIG_BOOTFILE is used for these purposes.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:57 2008 +0300
- mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
- Current DDR setup easily causes memory corruption, this patch fixes it.
- Also fix TIMING_CFG0_MRS_CYC definition.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:53 2008 +0300
- mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
- This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
- controller and FHCI (QE USB).
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 7ad959490962e6842648d87d4bd795ea6cdcce67
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:51 2008 +0300
- mpc83xx: MPC8360E-RDK: add support for NAND
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 9a3e832aeb491861d029991241572ebdf4b5b61b
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:46 2008 +0300
- mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
- This is needed for BCM PHYs to work on this board.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:34 2008 +0300
- uec: add support for Broadcom BCM5481 Gigabit PHY
- This patch adds basic support for Broadcom BCM5481 PHY.
- RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
- Peter Barada <peterb@logicpd.com>.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 6a600c3a1876bc203445df4f0fd6b12648259666
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:28 2008 +0300
- uec: add support for RGMII_RXID interface mode
- PHY drivers will use it to setup software delay between RXD and RXC
- signals.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 20:46:24 2008 +0300
- uec: add support for gbit mii status readings
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 17:40:47 2008 +0300
- 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
- This is primarily for the early console support.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 17:40:43 2008 +0300
- 83xx: initialize serdes for MPC837XRDB boards
- On the MPC8377ERDB: 2 SATA and 2 PCI-E.
- On the MPC8378ERDB: 2 PCI-E
- On the MPC8379ERDB: 4 SATA
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 453316a2a19642d8afcbca7452e40a6b44a197b1
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 17:40:32 2008 +0300
- 83xx: serdes setup routines
- This patch adds few routines to configure serdes on 837x targets.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 17:40:27 2008 +0300
- 83xx: split COBJS onto separate lines
- ..plus get rid of some #ifdefs in the .c files.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Mar 24 17:40:23 2008 +0300
- 83xx: nand support for MPC837XRDB boards
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 82e45a204190593e8613145a928f998fb8c909c4
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Tue Mar 18 21:44:41 2008 -0400
- Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 0fa7a1b4719e325fce332689fb8754ec166191ff
- Author: Michael Barkowski <michael.barkowski@freescale.com>
- Date: Thu Mar 20 13:15:39 2008 -0400
- mpc8323erdb: remove RTC and add EEPROM
- There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
- Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
- Author: Michael Barkowski <michael.barkowski@freescale.com>
- Date: Thu Mar 20 13:15:34 2008 -0400
- mpc8323erdb: Improve the system performance
- The following changes are based on kernel UCC ethernet performance:
- 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
- 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
- switch to enable this setting.
- The following changes are based on the App Note AN3369 and
- verified to improve memory latency using LMbench:
- 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
- 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
- previously.
- 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
- Twr=15ns, and this was already the setting in DDR_MODE)
- 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
- Trp=15ns)
- 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
- Tras=40ns)
- 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
- Trcd=15ns)
- 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
- Trfc=75ns)
- 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
- on Tfaw=50ns)
- 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
- on CL=3 and WL=2).
- Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit fc549c871f43933396a5b3e21d897023d4b31b8d
- Author: Michael Barkowski <michael.barkowski@freescale.com>
- Date: Thu Mar 20 13:15:28 2008 -0400
- mpc8323erdb: use readable DDR config macros
- Use available shift/mask macros to define DDR configuration.
- Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit 89c7784ed90ba50301eec521144f95111e472906
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Feb 8 13:15:55 2008 -0600
- 83xx: Add Vitesse VSC7385 firmware uploading
- Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
- the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
- Cleaned up the board header files to make selecting the VSC7385 easier to
- control.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Feb 8 13:15:54 2008 -0600
- NET: Add Vitesse VSC7385 firmware uploading
- The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
- and other boards. A small firwmare must be uploaded to its on-board memory
- before it can be enabled. This patch adds the code which uploads firmware
- (but not the firmware itself).
- Previously, this feature was provided by a U-Boot application that was
- made available only on Freescale BSPs. The VSC7385 firmware must still
- be obtained separately, but at least there is no longer a need for a separate
- application.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Acked-by: Ben Warren <biggerbadderben@gmail.com>
- commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Mar 26 00:52:10 2008 +0100
- Coding Style cleanyp; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 43ddd9c820fec44816188f53346b464e20b3142d
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Sat Mar 22 14:23:49 2008 -0400
- Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
- These defines embedded the u-boot env variables and/or the bd_t structure
- in the fdt blob. The conclusion of discussion on the u-boot email list
- was that embedding these in the fdt blob is not useful: there are better
- ways of passing the data (in fact, the fdt blob itself replaces the
- bd_t struct).
- The only board that enables these is the stxxtc and they don't appear
- to be used by linux.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit 22ed2285743359fd1fe73e411dff914b2256e68f
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Mar 17 10:49:25 2008 +0100
- rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Mar 17 08:54:06 2008 +0900
- Add Flex-OneNAND booting support
- Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
- using a NOR Flash interface. This on-chip integration enables system designers
- to reduce external system logic and use high-density NAND Flash
- in applications that would otherwise have to use more NOR components.
- Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
- in more flexible way. While MLC area of Flex-OneNAND can be used to store data
- that require low reliability and high density, SLC area of Flex-OneNAND
- to store data that need high reliability and high performance. Flex-OneNAND
- can let users take advantage of storing these two different types of data
- into one chip, which is making Flex-OneNAND more cost- and space-effective.
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit c512389cc4a10253249271ff6c887c6dab1f0db2
- Author: André Schwarz <andre.schwarz@matrix-vision.de>
- Date: Thu Mar 13 13:50:52 2008 +0100
- MPC5200: support setup without FEC
- Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
- defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
- Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit aa3511e422946041ef626f80a05ae5e8bfc700e6
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 5 18:05:46 2008 -0600
- FSL: Move board/mpc8266ads under board/freescale
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7f1d846e5c5754449c286587d099d85246062772
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 5 18:05:47 2008 -0600
- FSL: Move board/mpc7448hpc2 under board/freescale
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 5 18:05:45 2008 -0600
- FSL: Move board/mpc8260ads under board/freescale
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
- Author: goda.yusuke <goda.yusuke@renesas.com>
- Date: Wed Mar 5 17:08:33 2008 +0900
- net: Add support AX88796L ethernet device
- AX88796L is device of NE2000 compatible.
- This patch support AX88796L ethernet device.
- Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
- Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit e0a6140dd381e1eed1ada2291166ef2616d8822b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 25 22:50:41 2008 +0100
- ne2000 driver: change #ifdef to Makefile conditional compilation
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e710185aae90c64d39c2d453e40e58ceefe4f250
- Author: goda.yusuke <goda.yusuke@renesas.com>
- Date: Wed Mar 5 17:08:20 2008 +0900
- net: Divided code of NE2000 ethernet driver
- There are more devices of the NE2000 base.
- A present code is difficult for us to support more devices.
- To support more NE2000 clone devices, separated the function.
- Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
- Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 395bce4f59a507a60a475f7ee46bed47de9482df
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sun Feb 24 23:58:13 2008 -0500
- net/Blackfin: move on-chip MAC driver into drivers/net/
- The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
- directory, but it is not board specific, so relocate it to the drivers dir
- so that other Blackfin ports can utilize it.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sun Feb 24 23:52:35 2008 -0500
- smc91111: use SSYNC() rather than asm(ssync) for Blackfin
- Since the "ssync" instruction may have hardware anomalies associated with
- it, have the smc91111 driver use the SSYNC macro rather than invoking it
- directly. We workaround all the anomalies via this macro.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
- Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
- Date: Sun Feb 17 22:57:47 2008 +0000
- 8xx: Update OF support on 8xx
- This patch does some shifting around of OF support on 8xx.
- Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
- commit 9c666a7db0b2285a270c68810889ce7d5dba304b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Feb 15 15:16:18 2008 -0600
- ppc: Allow boards to specify how much memory they can map
- For historical reasons we limited the stack to 256M because some boards
- could only map that much via BATS. However newer boards are capable of
- mapping more memory (for example 85xx is capble of doing up to 2G).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
- Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
- Date: Fri Feb 15 01:05:58 2008 +0000
- 8xx : Add OF support to Adder875 board port - resubmit
- Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
- commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Feb 14 20:44:42 2008 -0600
- Add setexpr command
- Add a simple expr style command that will set an env variable as the result
- of the command. This allows us to do simple math in shell. The following
- operations are supported: &, |, ^, +, -, *, /.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3f105faa64b9826e088711fdfcaa70cb1230397a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 5 17:27:48 2008 -0600
- FSL: Move board/mpc7448hpc2 under board/freescale
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 449c703374a8868453425e15da7e2f76221b72e4
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 5 17:21:43 2008 -0600
- FSL: Move board/mpc8266ads under board/freescale
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 5863577989ad689427bb750107e9a75f1c1645d2
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Mar 5 16:41:41 2008 -0600
- FSL: Move board/mpc8260ads under board/freescale
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 8a773983957ee6c4aa344469b742f29c7d26afbd
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:08 2008 +0900
- [MIPS] Move gth2_config from ARM section to MIPS
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:07 2008 +0900
- [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:07 2008 +0900
- [MIPS] Fix dcache_status()
- You can't judge UNCACHED by Config.K0 LSB.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:07 2008 +0900
- [MIPS] Introduce _machine_restart
- Handles machine specific functions by using weak functions.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit decaba6f5cf386d569ac3997bebb871b966c6b18
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:07 2008 +0900
- [MIPS] Cleanup CP0 Status initialization
- Add setup_c0_status from Linux. For the moment we disable interrupts, set
- CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
- reset-time configuration and will work well across most processors.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:07 2008 +0900
- [MIPS] Initialize CP0 Cause before setting up CP0 Status register
- Without this change, we'll be suffering from deffered WATCH exception
- once Status.EXL is cleared. Make sure Cause.WP is cleared.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 26138623230ca2bad3c78e05a65527ea70c8b688
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:07 2008 +0900
- [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
- Move things to appropriate place.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:06 2008 +0900
- [MIPS] Implement flush_cache()
- We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
- don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
- function is used not only in U-Boot specfic programs but also at loading
- target binaries.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:06 2008 +0900
- [MIPS] Fix I-/D-cache initialization loops
- Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
- again per a loop for I-cache initialization. But according to 'See MIPS
- Run', we're encouraged to use three separate loops rather than combining
- them *for both I- and D-cache*. This patch tries to fix this.
- In accordance with fixing above, mips_init_[id]cache are separated from
- mips_cache_reset(), and rewrite cache loops are completely rewritten with
- useful macros.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 1898840797c7f50799377bd5b285a8a93a82c419
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:06 2008 +0900
- [MIPS] Replace memory clearance code with f_fill64
- This routine fills memory with zero by 64 bytes, and is 64-bit capable.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 21:30:06 2008 +0900
- [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
- This patch replaces the current function definitions with NESTED, LEAF
- and END macro. They specify some more additional information about the
- function; an alignment of symbol, type of symbol, stack frame usage, etc.
- These information explicitly tells the assembler and the debugger about
- the types of code we want to generate.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 282223a607c611425fa33f5428f8eae6636972bb
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 11:43:17 2008 +0900
- [MIPS] asm headers' updates
- Make some asm headers adjusted to the latest Linux kernel.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Tue Mar 25 11:39:29 2008 +0900
- [MIPS] Request for the 'mips_cache_lock()' removal
- The initial intension of having mips_cache_lock() was to use the cache
- as memory for temporary stack use so that a C environment can be set up
- as early as possible.
- But now mips_cache_lock() follow lowlevel_init(). We've already have the
- real memory initilaized at this point, therefore we could/should use it.
- No reason to lock at all.
- Other problems:
- Cache locking is not consistent across MIPS implementaions. Some imple-
- mentations don't support locking at all. The style of locking varies -
- some support per line locking, others per way, etc. Some parts use bits
- in status registers instead of cache ops. Current mips_cache_lock() is
- not necessarily general-purpose.
- And this is worthy of special mention; once U-Boot/MIPS locks the lines,
- they are never get unlocked, so the code relies on whatever gets loaded
- after U-Boot to re-initialize the cache and clear the locks. We're sup-
- posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
- but leave the situation as it is for a long time.
- For these reasons, I proposed the removal of mips_cache_lock() from the
- global start-up code.
- This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
- *things have changed*. If he wants the same behavior as before, he needs
- to have CFG_INIT_RAM_LOCK_MIPS in his config file.
- If we don't have any regression report through several releases, then
- we'll remove codes entirely.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Acked-by: Andrew Dyer <amdyer@gmail.com>
- commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Mon Mar 24 11:30:54 2008 +0100
- lwmon5 SYSMON POST: fix backlight control
- If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
- run on the board, then the SYSMON POST controls the display backlight
- (doesn't switch backlight ON if POST FAILED, and does switch the
- backlight ON if PASSED).
- If not, then the video driver controls the display backlight (just
- switch ON the backlight upon initialization).
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Mon Mar 24 11:29:14 2008 +0100
- lwmon5 SYSMON POST: fix handling of negative temperatures
- Fix errors in the LWMON5 Sysmon POST for negative temperatures.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Fri Mar 7 16:04:25 2008 +0900
- pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
- In current source code, when the device number of PCI is 0, process PCI
- bridge without fail. However, when the device number is 0, it is not PCI
- always bridge. There are times when device of PCI allocates.
- When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
- use this patch.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Fri Mar 21 09:18:40 2008 +0100
- LWMON5: fix dsPIC POST
- Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
- commit 388b82fddc7c05596f3f615f190da0448227dc82
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 20 23:23:13 2008 +0100
- [new uImage] Enable new uImage support for the pcs440ep board.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 20 23:23:13 2008 +0100
- [new uImage] Do not compile new uImage format support by default
- Disable default building of new uImage format support in preparation
- for merge with the master. Support for new format can be enabled on
- a per-board basis, by defining the following in the board's config file:
- #define CONFIG_FIT 1
- #define CONFIG_OF_LIBFDT 1
- This can be optionally defined to give more verbose output:
- #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit dafaede8a46c7159310239e036c93e31c6374487
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 20 23:20:31 2008 +0100
- [new uImage] Disable debuging output in preparation for merge with master
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit fbe7a155027beacebaee9b32e1ada781fe924bca
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 20 19:38:45 2008 +0100
- [new uImage] Compilation and new uImage handling fixes for imxtract
- Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
- include/config_cmd_default.h. Fix few warnings and handling of new format
- images.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 36cc8cbb3379d5166f882641123521735c469f92
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 20 23:10:19 2008 +0100
- [new uImage] Fix autoscr command used with new uImage format
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 43142e817f0597be412e7cbe19413f5532eafa5d
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Mar 20 23:10:19 2008 +0100
- [new uImage] Fix *.its files location in documentation
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Mar 20 22:01:38 2008 +0100
- lwmon5 POST: remove unreachable code
- plus some coding style cleanup
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu Mar 20 17:56:04 2008 +0300
- LWMON5: POST RTC fix
- Modify the RTC API to provide one a status for the time reported by
- the rtc_get() function:
- 0 - a reliable time is guaranteed,
- < 0 - a reliable time isn't guaranteed (power fault, clock issues,
- and so on).
- The RTC chip drivers are responsible for providing this info if the
- corresponding chip supports such functionality. If not - always
- report that the time is reliable.
- The POST RTC test was modified to detect the RTC faults utilizing
- this new rtc_get() feature.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Mar 19 14:25:14 2008 +0100
- TQM5200B: update MTD partition layout
- - insert partition for dtb blob to TQM5200B MTD layout
- - set env variables dependent on the configured board
- (TQM5200 or TQM5200B)
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit f0105727d132f56a21fa3ed8b162309cca6cac44
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 19 07:09:26 2008 +0100
- CFI: Small cleanup for FLASH_SHOW_PROGRESS
- With this patch we don't need that many #ifdef's in the code. It moves
- the subtraction into the macro and defines a NOP-macro when
- CONFIG_FLASH_SHOW_PROGRESS is not defined.
- Signed-off-by: Stefan Roese <sr@denx.de>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 9a042e9ca512beaaa2cb450274313fc477141241
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Sat Mar 8 13:48:01 2008 -0500
- Flash programming progress countdown.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Mar 19 10:00:06 2008 +0100
- [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Mon Feb 18 18:09:04 2008 +1100
- libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
- Since fdt_node_offset_by_compatible() was converted to the new
- fdt_next_node() iterator, a chunk of initialization code became
- redundant, but was not removed by oversight. This patch cleans it up.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit d0ccb9b140b472039732de102fc14597eedb14df
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Mon Feb 18 18:06:31 2008 +1100
- libfdt: Trivial cleanup for CHECK_HEADER)
- Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
- However, there are a handful of functions (fdt_move, rw_check_header,
- fdt_open_into) from other files which could also use it (currently
- they open-code something more-or-less identical). Therefore, this
- patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
- places.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit fe30a354cdbb808b5f15366a935b151a4ccee74f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 20 14:32:36 2008 -0600
- Fix fdt boardsetup command parsing
- The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 804887e6001e2f00bea11431bf34d6d472512cda
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Feb 15 03:34:36 2008 -0600
- Add sub-commands to fdt
- fdt header - Display header info
- fdt bootcpu <id> - Set boot cpuid
- fdt memory <addr> <size> - Add/Update memory node
- fdt rsvmem print - Show current mem reserves
- fdt rsvmem add <addr> <size> - Add a mem reserve
- fdt rsvmem delete <index> - Delete a mem reserves
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Thu Feb 14 16:50:34 2008 +1100
- libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
- fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
- node which has NOP tags interspersed with its properties. In this
- case fdt_add_subnode_namelen() will put the new subnode before the
- first NOP tag, even if there are properties after it, which will
- result in an invalid blob.
- This patch fixes the bug, and adds a testcase for it.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Tue Feb 12 11:58:31 2008 +1100
- libfdt: Add and use a node iteration helper function.
- This patch adds an fdt_next_node() function which can be used to
- iterate through nodes of the tree while keeping track of depth. This
- function is used to simplify the iteration code in a lot of other
- functions, and is also exported for use by library users.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Fri Jan 11 14:55:05 2008 +1100
- libfdt: Add fdt_set_name() function
- This patch adds an fdt_set_name() function to libfdt, mirroring
- fdt_get_name(). This is a r/w function which alters the name of a
- given device tree node.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit 23e20aa6488e6c0622496549861bfdc74108debe
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Tue Mar 18 13:33:30 2008 +0100
- lwmon5: Fix register test logic to match the specific GDC h/w.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 46bc0a938779aa1d664b847d36b08aa00f22e539
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Tue Mar 18 13:27:57 2008 +0100
- Fix backlight in the lwmon5 POST.
- Backlight was switched on even when temperature was too low.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Wed Feb 6 18:48:36 2008 +0100
- The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
- To enable this, alternative, configuration the U-Boot board configuration
- file for lwmon5 includes the definitions of alternative addresses for header
- (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
- The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
- and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
- lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 17:11:53 2008 +0100
- Add support for the lwmon5 board reset via GPIO58.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 17:09:55 2008 +0100
- Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 14:11:03 2008 +0100
- The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 14:10:42 2008 +0100
- The patch adds new POST tests for the Lwmon5 board. These are:
- * External Watchdog test;
- * dsPIC tests;
- * FPGA test;
- * GDC test;
- * Sysmon tests.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit c2ed33efbfff5767bca236828e021c55fd547b6c
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 14:10:01 2008 +0100
- Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- commit 3a5d1e7f1309998791702b2a559e3126781746b9
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Tue Mar 18 13:33:30 2008 +0100
- lwmon5: Fix register test logic to match the specific GDC h/w.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Tue Mar 18 13:27:57 2008 +0100
- Fix backlight in the lwmon5 POST.
- Backlight was switcehd on even when temperature was too low.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Wed Feb 6 18:48:36 2008 +0100
- The patch introduces the alternative configuration of the log buffer for
- the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
- the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
- PPC440EPX_GPT0_COMP5).
- To enable this, alternative, configuration the U-Boot board configuration
- file for lwmon5 includes the definitions of alternative addresses for header
- (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
- The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
- and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
- lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit ff818b21b069f4bc9cb73373cc5a16014be101b7
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 17:11:53 2008 +0100
- Add support for the lwmon5 board reset via GPIO58.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 17:09:55 2008 +0100
- Some fixes to dspic, fpga, and gdc post tests for lwmon5.
- Disable external watch-dog for now.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit e262efe35742c1ad4b0966ff501efc26f34a0aec
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 14:11:03 2008 +0100
- The patch introduces the CRITICAL feature of POST tests. If the test
- marked as POST_CRITICAL fails then the alternative, post_critical,
- boot-command is used. If this command is not defined then U-Boot
- enters into interactive mode.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 65b20dcefc89618193fa51947968dada91e4c778
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 14:10:42 2008 +0100
- The patch adds new POST tests for the Lwmon5 board.
- These are:
- * External Watchdog test;
- * dsPIC tests;
- * FPGA test;
- * GDC test;
- * Sysmon tests.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
- Author: Yuri Tikhonov <yur@pollux.denx.de>
- Date: Mon Feb 4 14:10:01 2008 +0100
- Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 18 17:35:51 2008 +0100
- HMI1001: fix compile problem.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 1f2a9970109cebf7446e0503b10b71f8673045ee
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 18 05:32:30 2008 -0500
- Blackfin: BF537-stamp: drop board-specific flash driver for CFI
- The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
- for the board specific driver at all. Just use the common CFI driver.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Feb 19 00:36:14 2008 -0500
- Blackfin: add proper ELF markings to some assembly functions
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Feb 19 00:35:17 2008 -0500
- Blackfin: new cplbinfo command for viewing cplb tables
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit aadb72503cd1602349a5fe53356d5f55ecc1b900
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 18 05:37:51 2008 -0500
- Blackfin: update MAINTAINERS list
- Add maintainer information for the Blackfin boards.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 18 05:26:48 2008 -0500
- Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
- Stop tying things to the processor that should be tied to other defines and
- change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
- system to select the -mcpu option.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 86a20fb920bd198105acf7b1191117f566d637ed
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sat Feb 16 07:40:36 2008 -0500
- Blackfin: move bootldr command to common code
- This moves the Blackfin-common bootldr command out of the BF537-STAMP
- specific board directory and into the common directory so that all Blackfin
- boards may utilize it.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit decbe029b2a9d3333d02c433389b1c821eea96d7
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Mar 14 11:05:20 2008 +0100
- mgcoge: update configuration
- Fix configuration for mgcoge board
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit c136724cda0219c49f1d4b346f00da29b14fdf14
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 16 01:22:59 2008 +0100
- drivers/rtc/Makefile: keep list sorted
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
- Author: Tor Krill <tor@excito.com>
- Date: Sat Mar 15 15:40:26 2008 +0100
- Add support for Intersil isl1208 RTC
- Signed-off-by: Tor Krill <tor@excito.com>
- commit 0210cff3d079d97b2156b13685ee8de368e68a1a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Mar 15 17:36:41 2008 +0100
- cramfs: Fix ifdef
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 16 01:12:58 2008 +0100
- Conding style cleanup
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 41712b4e8c95dff23354bcd620e1f9477160c190
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 5 12:31:53 2008 +0100
- ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
- This patch adds USB OHCI support to the Canyonlands board port. It also
- enables EXT2 support.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2596f5b9d353ff3e4387a3325d05740f16958038
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 5 12:29:32 2008 +0100
- usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
- This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
- way a board just needs to define this new option to enable the "force
- NoPowerSwitching mode" instead of adding new CPU/architecture defines
- to the USB source itself.
- This new option will be used first with the new AMCC 460EX Canyonlands
- board port, which will be posted in a few days.
- This patch also fixes a small compilation problem when DEBUG is enabled.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 71665ebf88408ff2acb762af47989fd4365b321a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Mar 3 17:27:02 2008 +0100
- ppc4xx: Add Canyonlands NAND booting support
- 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
- NAND devices. The only bootstrap option for NAND booting is option F for
- 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
- EEPROM needs to be programmed accordingly.
- This patch adds basic NAND booting support for the AMCC Canyonlands aval
- board and also adds support to the "bootstrap" command, to enable NAND
- booting I2C setting.
- Tested with 512 byte page NAND device (32MByte) on Canyonlands.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 16:53:00 2008 +0100
- ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
- This patch adds support for the AMCC Canyonlands 460EX evaluation
- board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 16:52:24 2008 +0100
- ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
- This patch adds support for the AMCC Canyonlands 460EX evaluation
- board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 16:51:17 2008 +0100
- ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
- This patch adds support for the AMCC Canyonlands 460EX evaluation
- board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 15:11:43 2008 +0100
- ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
- This patch adds basic support for the AMCC 460EX/460GT PPC's.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 15:11:18 2008 +0100
- ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
- This patch adds basic support for the AMCC 460EX/460GT PPC's.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 999ecd5aca381984d8ebbeb207ece82a1c275577
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 15:07:10 2008 +0100
- ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
- This patch adds basic support for the AMCC 460EX/460GT PPC's.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 15:05:50 2008 +0100
- ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
- This patch adds basic support for the AMCC 460EX/460GT PPC's.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 15:05:26 2008 +0100
- ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
- This patch adds basic support for the AMCC 460EX/460GT PPC's.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 56e410178375d9f20be25fb24e180974f0ae120b
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 19 22:07:57 2008 +0100
- ppc4xx: interrupt.c reworked
- This patch is a rework of the 4xx interrupt handling done while
- adding the 460EX/GT support. Interrupts are needed on 4xx for the
- EMAC driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 19 22:01:57 2008 +0100
- ppc4xx: program_tlb now uses 64bit physical addess
- This patch changes the physical addess parameter from 32bit to 64bit.
- This is needed for 36bit 4xx platforms to access areas located
- beyond the 4GB border, like SoC peripherals (EBC etc.).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c3307fa186af85771924c434997089b8104c0a46
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 19 21:58:25 2008 +0100
- ppc4xx: miiphy.c reworked
- While adding the 460EX/GT support I reworked the 4xx miiphy code. It
- badly neede some cleanup.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 19 16:21:49 2008 +0100
- rtc: Add M41T62 support
- This patch add support for the STM M41T62 RTC. It is used and tested
- on the AMCC Canyonlands 406EX platform.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 217d383e201adc7f2271145ae345ea5eae2b7170
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Mon Feb 25 18:46:43 2008 +0100
- ppc4xx: Add 405GPr based MCU25 board specific files
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Mon Feb 25 18:46:42 2008 +0100
- ppc4xx: Add 405GPr based MCU25 board config file
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit b05f35436b733a240559e77e46bed8439665ecc5
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Mon Feb 25 18:46:41 2008 +0100
- ppc4xx: Add 405GPr based MCU25 board. Global files
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Mon Feb 25 18:37:02 2008 +0100
- ppc4xx: HCU4/5. remove obsolete hcu_flash.c
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit a079494853cc2bfeddb26673219db0b4b2b31566
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Mon Feb 25 18:37:01 2008 +0100
- ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
- Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
- the FLASH_CFI_LEGACY et al. config options.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit e4170e5a50c8110f792bc37472833ae669d69951
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 11 13:52:25 2008 +0100
- ppc4xx: Fix comment in 405EX DDR2 init code
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Mar 14 16:22:34 2008 +0100
- Add MD5 support to the new uImage format
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 0ede0c383530a418cf98be9122371a86573cd0db
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Mar 14 16:22:34 2008 +0100
- Add the MD5 algorithm
- MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
- calculated using the md5() function -- see include/md5.h for details.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Mar 14 16:04:54 2008 +0100
- tools/setlocalversion: use a git-describe-ish format
- Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
- where 'nnnnn' is the number of commits since the last tag (i.e.,
- 1.3.2-rc3). This makes it much easier to recognize "newer" versions
- and to see how much has been changed since the referenced tag.
- Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c6dc21c84de0f159a1752c5ebd33cff843f63609
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Mar 13 14:32:03 2008 +0100
- HMI1001: add support for MPC5200 Rev. B processors.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Mar 13 14:29:49 2008 +0100
- TQM5200: remove dead code
- This board never used a MGT5100 processor.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 12:14:15 2008 +0100
- [new uImage] Fix build issue on ARM
- ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3310c549a73a949430bfda90876df7552a1dab0c
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 12:13:13 2008 +0100
- [new uImage] Add new uImage format documentation and examples
- Create doc/uImage.FIT documentation directory with the following files:
- - command_syntax_extensions.txt : extended command syntax description
- - howto.txt : short usage howto
- - source_file_format.txt : internal new uImage format description
- Add example image source files:
- - kernel.its
- - kernel_fdt.its
- - multi.its
- Update README appropriately.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 1ec73761d2e247078f4520a265d463e8b73391a2
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:35:52 2008 +0100
- [new uImage] Fix definition of common bootm_headers_t fields
- verify, autostart and lmb fields are used regardless of CONFIG_FIT
- setting, move their definitions to common section.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 1d1cb4270edc6a99276834064069717f9782c491
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:35:51 2008 +0100
- [new uImage] Fix build problems on trab board
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit f773bea8e11f4a11c388dcee956b2444203e6b65
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:35:46 2008 +0100
- [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
- Save FIT configuration provied in the first bootm argument and use it
- when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
- arguments are not specified.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:01 2008 +0100
- [new uImage] More verbose kernel image uncompress error message
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:01 2008 +0100
- [new uImage] Use show_boot_progress() for new uImage format
- This patch allocates a set of show_boot_progress() IDs for new uImage format
- and adds show_boot_progress() calls in new uImage format handling code.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:01 2008 +0100
- [new uImage] Add new uImage fromat support to fpga command
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:01 2008 +0100
- [new uImage] Add new uImage format handling to other bootm related commands
- Updated commands:
- docboot - cmd_doc.c
- fdcboot - cmd_fdc.c
- diskboot - cmd_ide.c
- nboot - cmd_nand.c
- scsiboot - cmd_scsi.c
- usbboot - cmd_usb.c
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:00 2008 +0100
- [new uImage] Add new uImage format support to imgextract command
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:00 2008 +0100
- [new uImage] Add new uImage format support to autoscript routine
- autoscript() routine is updated to accept second argument, which
- is only used for FIT images and provides a FIT subimage unit name.
- autoscript() routine callers must now pass two arguments. For
- non-interactive use (like in cmd_load.c, cmd_net.c), new environment
- variable 'autoscript_uname' is introduced and used as a FIT
- subimage unit name source.
- autoscript command accepts extended syntax of the addr argument:
- addr:<subimg_uname>
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit cd7c596e9f561dbbc17b717277438aee78cde14f
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:33:00 2008 +0100
- [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
- This patch updates architecture specific implementations of
- do_bootm_linux() adding new uImage format handling for
- operations like get kernel entry point address, get kernel
- image data start address.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 3dfe110149311425919e6d6a14b561b4207498f1
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:32:59 2008 +0100
- [new uImage] Add node offsets for FIT images listed in struct bootm_headers
- This patch adds new node offset fields to struct bootm_headers
- and updates bootm_headers processing code to make use of them.
- Saved node offsets allow to avoid repeating fit_image_get_node() calls.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit bc8ed486b125452ba3bd8344f052f437329150c5
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:32:53 2008 +0100
- [new uImage] ppc: Add new uImage format support to FDT handling routines
- Support for new (FIT) format uImages is added to powerpc specific
- boot_get_fdt() routine which now recognizes, sanity checks FIT image
- and is able to access data sections of the requested component image.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit a44a269a905f924b420020506a4d7d7eedcc0eaf
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:14:57 2008 +0100
- [new uImage] Re-enable interrupts for non automatic booting
- Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
- environment variable is not set to 'yes'.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit d985c8498c4e47095820da97aa722381d39172c5
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:14:38 2008 +0100
- [new uImage] Remove unnecessary arguments passed to ramdisk routines
- boot_get_ramdisk() and image_get_ramdisk() do not need all
- cmdtp, flag, argc and argv arguments. Simplify routines definition.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit c87796483bc7c2900470dc747c367f602577608d
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:12:37 2008 +0100
- [new uImage] Add new uImage format support for ramdisk handling
- This patch updates boot_get_ramdisk() routine adding format
- verification and handling for new (FIT) uImages.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Mar 12 10:01:05 2008 +0100
- [new uImage] Add new uImage format support for kernel booting
- New format uImages are recognized by the bootm command,
- validity of specified kernel component image is checked and
- its data section located and used for further processing
- (uncompress, load, etc.)
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Mar 11 12:35:20 2008 +0100
- [new uImage] Add new uImage format support for imls and iminfo commands
- imls and iminfo can now recognize nad print out contents of the new (FIT)
- format uImages.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Mar 11 12:34:47 2008 +0100
- [new uImage] Add support for new uImage format to mkimage tool
- Support for the new uImage format (FIT) is added to mkimage tool.
- Commandline syntax is appropriately extended:
- mkimage [-D dtc_options] -f fit-image.its fit-image
- mkimage (together with dtc) takes fit-image.its and referenced therein
- binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
- final image that can be transferred to the target (e.g., via tftp) and then
- booted using the bootm command in U-Boot.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit eb6175edd6c120d8b89678243e5a2be362ee8e40
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Mon Mar 10 17:53:49 2008 +0100
- [new uImage] Make node unit names const in struct bootm_headers
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Feb 29 21:24:06 2008 +0100
- [new uImage] New uImage low-level API
- Add FDT-based functions for handling new format component images,
- configurations, node operations, property get/set, etc.
- fit_ - routines handling global new format uImage operations
- like get/set top level property, process all nodes, etc.
- fit_image_ - routines handling component images subnodes
- fit_conf_ - routines handling configurations node
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 30f1806f60978d707b0cff2d7bf89d141fc24290
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 16:20:02 2008 +0100
- Release v1.3.2
- Update CHANGELOG for release.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Mar 9 14:52:11 2008 +0100
- SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit db695b78515ddb88a2d4f3357c120345efbf59ec
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Mar 9 10:44:01 2008 +0100
- scb9328: Fix flash warning: type qualifiers ignored on function return type
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 10:50:41 2008 +0100
- esd/common/fpga.c: fix indentation.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cc3843e36453e2b8db65d7e56de938ba045016a0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 10:33:31 2008 +0100
- common/kgdb.c: fix 'dereferencing type-punned pointer' warning
- and get rid of a couple of unneeded casts.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 10:09:53 2008 +0100
- esd/common/fpga.c: fix 'assignment of read-only location' error
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c6fe4dabac066e8758345d249032768496983a3e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 02:13:19 2008 +0100
- Makefile: make build silently again.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 76babc86576f092573599334c85ec543fdbc6015
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 02:07:49 2008 +0100
- m501sk: Fix out of tree building
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 9 00:06:09 2008 +0100
- ADS5121: fix out of tree build
- and simplify Makefile a bit.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Mar 8 22:35:31 2008 +0100
- Release v1.3.2
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 78a90f827df74520e939c794fc7413dace21c4db
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Mar 8 22:35:04 2008 +0100
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Mar 8 21:30:04 2008 +0100
- esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d75469d48c05795144f4b8ba76addbb4920a7bba
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sat Mar 8 09:25:49 2008 +0900
- net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
- When rtl_recv() of rtl8169 is called, OWNbit of status register
- is not enable occasionally.
- rtl_recv() doesn't work normally when the driver doesn't do
- appropriate processing.
- This patch fix this problem.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Mar 7 08:15:28 2008 +0100
- mgsuvd: update board configuration
- initialize the UPIOx controller.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Mar 7 08:13:41 2008 +0100
- mgcoge: update board configuration
- add support for the config Flash.
- initialize the UPIOx controller.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Mar 7 12:27:31 2008 -0600
- mpc83xx: make dtb basename file references equal those of linux
- the dts file basenames were updated in linux - this helps avoid
- inadvertently loading any old dtbs laying around.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Feb 27 16:08:22 2008 -0600
- net: uec_phy: actually increment the timeout counter
- allow u-boot to recover (and, e.g., switch to another interface) in the
- case where a PHY does not report autonegotiation is complete within its
- two second timeout value.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 772003e43957ee0c895abed7cd82cbe72820cbb8
- Author: Markus Brunner <super.firetwister@googlemail.com>
- Date: Wed Mar 5 21:38:12 2008 +0100
- fix taihu soft spi_read
- The taihu board used gpio_read_out_bit which reads the output register and not
- the pin state.
- Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
- commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Mar 7 08:01:43 2008 +0100
- ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit bd4458cb47abecabd406b1210457be96c69fc49d
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Mar 4 16:59:22 2008 +0800
- 837xEMDS: Improve the system performance
- 1. Make the CSB bus pipeline depth as 4, and enable
- the repeat mode;
- 2. Raise the eTSEC emergency priority;
- 3. Use the highest IP blocks clock.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
- Author: Detlev Zundel <dzu@denx.de>
- Date: Thu Mar 6 16:45:53 2008 +0100
- Replace "run load; run update" with conditionalized "run load update".
- The latter version stops when "run load" fails for whatever reasons
- rendering the combination *a lot* more secure.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 6bc113886d7d316df1a4e459bec8baf027518551
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 4 17:40:41 2008 +0100
- net: Print error message upon net usage when no ethernet-interface is found
- This patch fixes a problem seen on PPC4xx boards, when no MAC address is
- defined. Then no ethernet interface is available but a simple "tftp"
- command will return without any error message which is quite confusing.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a30a549a3553032d809e0356306b62de0b125901
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Mar 4 10:03:03 2008 -0600
- Remove erroneous or extra spd.h #includers.
- Many of the spd.h #includers don't need it,
- and wanted to have spd_sdram() declared instead.
- Since they didn't get that, some also had open
- coded extern declarations of it instead or as well.
- Fix it all up by using spd_sdram.h where needed.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a4475386cef14af3fd88f0518b688e755669486d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 4 17:41:28 2008 +0100
- PCS440EP: fix build problems (redundant #define)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 4 17:39:25 2008 +0100
- net: Print error message upon net usage when no ethernet-interface is found
- This patch fixes a problem seen on PPC4xx boards, when no MAC address is
- defined. Then no ethernet interface is available but a simple "tftp"
- command will return without any error message which is quite confusing.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 4 17:38:50 2008 +0100
- W7OLMC/W7OLMG: fix build problems (redundant #define)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f9301e1cda296245ba052d7b08321199c3d0af9d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 4 14:58:31 2008 +0100
- Makefile: fix problem with out-of-tree builds introduced by 5013c09f
- Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
- problem for out-of-tree builds which caused "make clean" to fail.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit dfece9500556bed5d8244b1c15d973cec7c25bfe
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 4 11:58:26 2008 +0100
- examples/Makefile: build "hello_world" on 8xx, too.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 74eb0222594fd23aafdf168e60e872814eea8b62
- Author: Mike Nuss <mike@terascala.com>
- Date: Mon Mar 3 15:27:05 2008 -0500
- PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
- Every now and then a Sequoia board (or equivalent hardware) had
- problems connecting to a Gigabit capable network interface.
- There were differences in the PHY setup between Linux and U-Boot.
- This patch fixes the problem. Apparently "remote fault" is being set,
- which signals to some devices (on the other end of the cable) that a
- fault has occurred, while other devices ignore it. I believe the RF bit
- was causing the issue, but I removed T4 also, to match up with Linux.
- Signed-off-by: Mike Nuss <mike@terascala.com>
- commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
- Author: Timur Tabi <timur@freescale.com>
- Date: Mon Mar 3 09:58:52 2008 -0600
- fix QE firmware uploading limit
- Fix a typo in qe_upload_firmware() that prevented uploading firmware on
- systems with more than one RISC core.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
- Author: Bernhard Nemec <bnemec@ganssloser.com>
- Date: Mon Mar 3 11:57:23 2008 +0000
- Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
- Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
- see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
- Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
- commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
- Author: Kim B. Heino <Kim.Heino@bluegiga.com>
- Date: Mon Mar 3 10:39:13 2008 +0200
- fix copy from ram to dataflash
- If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
- routines instead of dataflash. This is because it checks "if source
- address is not dataflash" instead of target address.
- Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
- commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Mar 3 12:16:44 2008 +0100
- Fix quoting problem (preboot setting) in many board config files.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Mar 3 12:36:49 2008 +0100
- ADS5121: Fix default environment.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Mar 2 16:12:31 2008 +0100
- Makefile: Fix missing unconfig and mkconfig use
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
- Author: michael <trimarchi@gandalf.sssup.it>
- Date: Sun Mar 2 23:33:46 2008 +0100
- Fix checking fat32 cluster size.
- This fixes the cluster size tests in the FAT32 file system.
- The current implementation of VFAT support doesn't work if the
- referred cluster has an offset > 16bit representation, causing
- "fatload" and "fatls" commands etc. to fail.
- Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
- commit 661bad63a076a96c39c64f136915f146725af92b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 2 22:57:23 2008 +0100
- Prepare v1.3.2-rc2 release candidate
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 76957cb3d621bf664311908e5962e151c633c285
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 1 12:11:40 2008 +0100
- ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
- The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
- currently 4k/2k is configured. This patch fixes this issue.
- Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 118978c8eb43803e2794233922df4249fa278b83
- Author: Woodruff, Richard <r-woodruff2@ti.com>
- Date: Fri Feb 29 17:34:35 2008 -0600
- Fix alignment error on ARM for modules
- Fix alignment fault on ARM when running modules. With out an explicit
- linker file gcc4.2.1 will half word align __bss_start's value. The word
- dereference will crash hello_world.
- signed-off-by Richard Woodruff <r-woodruff2@ti.com>
- commit ce1120dd703e6f12c59e4eba9962356a0300b832
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Feb 29 17:45:31 2008 +0800
- fs: Fix ext2 read issue
- The ext2 aligned process will corrupt the key
- data struct, the patch fix this.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Mar 2 22:45:33 2008 +0100
- Makefile: cleanup "clean" target
- Make sure CDPATH settings cannot interfere.
- Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ffda586fc1373243c9794babde69500f6293a8d8
- Author: Li Yang <leoli@freescale.com>
- Date: Fri Feb 29 11:46:05 2008 +0800
- add cscope build target
- Add cscope build target to generate cscope database for code browsing.
- Signed-off-by: Li Yang <leoli@freescale.com>
- commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Feb 27 15:06:39 2008 -0600
- net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
- erratum 5.6 states the autoneg completion bit is functional only if the
- autoneg bit is asserted.
- This fixes any secondarily-issued networking commands on non-gigabit
- links on the mpc8360 mds board.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5f91db7f582ca17b1f19f10189c025696f333d2e
- Author: John Rigby <jrigby@freescale.com>
- Date: Tue Feb 26 09:38:14 2008 -0700
- MPC5121e ADS PCI support take 3
- Adds PCI support for MPC5121
- Tested with drivers/net/rtl8139.c
- Support is conditional since PCI on old silicon does not work.
- ads5121_PCI_config turns on PCI
- In this version, condition compilation of PCI code has been moved
- from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
- suggested by Jean-Christophe PLAGNIOL-VILLARD
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit 44b4dbed4133f657705b7c5193209da9978243a7
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Mon Feb 25 23:53:07 2008 +0100
- Fix warnings while compilation of post/drivers/memory.c
- Fix warnings while compilation with new gcc in eldk-4.2
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Mon Feb 25 20:54:04 2008 +0100
- ppc4xx: Fix problem in 4xx_enet.c driver
- U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
- enabled. To reproduce the problem ensure that 'ethrotate'
- environment variable isn't set to "no" and then run
- "tftp 200000 not_existent_file".
- This patch tries to fix the issue.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Mon Feb 25 20:04:20 2008 +0100
- POST: Disable cache while SPR POST
- Currently (since commit b2e2142c) u-boot crashes on
- sequoia board while SPR test if CONFIG_4xx_DCACHE is
- enabled. This patch disables the cache while SPR test.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Feb 25 17:52:40 2008 +0100
- TQM5200: use automatic fdt memory fixup (part 2)
- Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
- TB5200 and TB5200_B to fixup the /memory node with the memory values
- detected by U-Boot.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 44ceec253ea941b301abf4b079d52324def69d92
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Feb 25 15:17:05 2008 +0100
- TQM5200: use automatic fdt memory fixup
- Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
- TB5200 and TB5200_B to fixup the /memory node with the memory values
- detected by U-Boot.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Feb 25 13:27:52 2008 +0100
- TQM5200: fix bug in SDRAM initialization code
- This patch fixes a bug in the SDRAM initialization code for the
- TQM5200. The hi_addr bit is now set correctly. Without this patch
- the hi_addr bit is always set to 1, if the second SDRAM bank is
- not populated.
- For other MPC5200 boards a correspondig patch has already been applied
- some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- --
- Forget the first patch please. I confused flash with SDRAM in
- the comment ...
- commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Feb 25 00:03:12 2008 +0100
- mx1fs2/flash: Fix multiple compiler warnings
- "pointer targets in assignment differ in signedness"
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Feb 25 00:03:11 2008 +0100
- arm-imx: Fix register definitions
- Sync register definitions with linux
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Feb 25 00:03:10 2008 +0100
- actua1/actua2/actua3: Fix multiple unused variable warnings
- - actua1:
- actux1.c: In function 'checkboard':
- actux1.c:92: warning: unused variable 'revision'
- - actua2:
- actux2.c: In function 'checkboard':
- actux2.c:100: warning: unused variable 's'
- actux2.c:99: warning: unused variable 'revision'
- actux2.c: In function 'reset_phy':
- actux2.c:130: warning: unused variable 'i'
- - actua3:
- actux3.c: In function 'checkboard':
- actux3.c:114: warning: unused variable 'revision'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sun Feb 24 11:44:29 2008 +0900
- Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
- The previous patch was lacking of i386, microblaze, nios and nios2. This
- patch tries to fix them.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Feb 29 22:22:46 2008 +0100
- [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
- Do not use global fdt blob pointer, calculate blob size from routine
- argument blob pointer.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit d1cc52879c8966507dad9fb575481e6d3985e64e
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Tue Feb 12 00:58:31 2008 +1100
- libfdt: Add and use a node iteration helper function.
- This patch adds an fdt_next_node() function which can be used to
- iterate through nodes of the tree while keeping track of depth. This
- function is used to simplify the iteration code in a lot of other
- functions, and is also exported for use by library users.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit 8cf30809a82902a471866d2f07725ce3b8a22291
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Feb 29 16:00:24 2008 +0100
- [new uImage] Add libfdt support to mkimage
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Feb 29 16:00:23 2008 +0100
- [new uImage] Add sha1.o object to mkimage binary build
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit df6f1b895c997978f03afe04502ee76b7ba34ab9
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Feb 29 16:00:06 2008 +0100
- [new uImage] Fix component handling for legacy multi component images
- Use uint32_t when accessing size table in image_multi_count() and
- image_multi_getimg() for multi component images.
- Add missing uimage_to_cpu() endianness conversion.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Feb 29 15:59:59 2008 +0100
- [new uImage] Share common uImage code between mkimage and U-boot
- This patch adds the following common routines:
- 1) Dedicated mkimage print_header() is replaced with common
- image_print_contents()
- image_print_contents_noindent()
- 2) Common os/arch/type/comp fields name <--> id translation routines
- genimg_get_os_name()
- genimg_get_arch_name()
- genimg_get_type_name()
- genimg_get_comp_name()
- genimg_get_os_id()
- genimg_get_arch_id()
- genimg_get_type_id()
- genimg_get_comp_id()
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Feb 29 14:58:34 2008 +0100
- [new uImage] Update naming convention for bootm/uImage related code
- This patch introduces the following prefix convention for the
- image format handling and bootm related code:
- genimg_ - dual format shared code
- image_ - legacy uImage format specific code
- fit_ - new uImage format specific code
- boot_ - booting process related code
- Related routines are renamed and a few pieces of code are moved around and
- re-grouped.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:51 2008 -0600
- [new uImage] Respect autostart setting in linux bootm
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:50 2008 -0600
- [new uImage] Provide ability to restrict region used for boot images
- Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
- to restrict what memory range is used for bootm.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:49 2008 -0600
- [new uImage] Use lmb for bootm allocations
- Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
- functions over to using lmb for allocation of the ramdisk, command line
- and kernel bd info.
- Convert PPC specific fdt_relocate() to use lmb for allocation of the device
- tree.
- Provided a weak function that board code can call to do additional
- lmb reserves if needed.
- Also introduce the concept of bootmap_base to specify the offset in
- physical memory that the bootmap is located at. This is used for
- allocations of the cmdline, kernel bd, and device tree as they should
- be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f5614e7926863bf0225ec860d9b319741a9c4004
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:48 2008 -0600
- [new uImage] Add autostart flag to bootm_headers structure
- The autostart env variable was dropped as part of the initial new uImage
- cleanup. Add it back here so the arch specific code can decide if it
- wants to really boot or not.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:47 2008 -0600
- [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
- Introduce the LMB lib used on PPC in the kernel as a clean way to manage
- the memory spaces used by various boot images and structures. This code
- will allow us to simplify the code in bootm and its support functions.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Feb 19 22:03:47 2008 -0600
- [new uImage] ppc: Allow boards to specify effective amount of memory
- For historical reasons we limited the stack to 256M because some boards
- could only map that much via BATS. However newer boards are capable of
- mapping more memory (for example 85xx is capable of doing up to 2G).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:46 2008 -0600
- [new uImage] rework error handling so common functions don't reset
- Changed image_get_ramdisk() to just return NULL on error and have
- get_ramdisk() propogate that error to the caller. It's left to the
- caller to call do_reset() if it wants to.
- Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
- to a common location. In the future we will change get_fdt() and
- fdt_relocate() to return success/failure and not call do_reset() at all.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit d2bc095a639672def11d5d043b5688d0dbd692ec
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:45 2008 -0600
- [new uImage] ppc: Re-order ramdisk/fdt handling sequence
- Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
- however it does mean we have to go in and fixup the initrd info since
- we don't know where it will be.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 27953493ef025fb698d68c5dee39b36f01f4d530
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:44 2008 -0600
- [new uImage] ppc: Determine if we are booting an OF style
- If we are bootin OF style than we can skip setting up some things
- that are used for the old boot method.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 21:51:43 2008 -0600
- [new uImage] Don't pass kdb to ramdisk_high since we may not have one
- We don't actually need the kdb param as we are just using it to get
- bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
- boot via OF we might not actually fill out a kdb.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Acked-by: Marian Balakowicz <m8@semihalf.com>
- commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 27 16:30:47 2008 -0600
- 85xx: Don't icbi when unlocking the cache
- There is no reason to icbi when invalidating the temporary stack in
- the d-cache. Its impossible on e500 to have the i-cache contain
- any addresses in the temp stack and it can be problematic in generating
- transactions on the bus to non-valid addresses.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Feb 27 15:50:50 2008 -0600
- Fix source for ECM error IVPR
- The source vector for the ECM was being set to 2,
- but that's what the source vector for DDR was being
- set to. Change it to 1.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Feb 27 14:29:58 2008 -0600
- Invalidate INIT_RAM TLB mappings
- Commit 0db37dc... (and some others) changed the INIT_RAM TLB
- mappings to be unguarded. This collided with an existing "bug"
- where the mappings for the INIT_RAM were being kept around.
- This meant that speculative loads to those addresses were
- succeeding in the TLB, and going out to the bus, where they
- were causing an exception (there's nothing at that address). The
- Flash code was coincidentally causing such a speculative load.
- Rather than go back to mapping the INIT RAM as guarded, we fix
- it so that the entries for the INIT_RAM are invalidated. Thus
- the speculative loads will fail in the TLB, and have no effect.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 22:56:17 2008 +0100
- sbc8548: Fix Revision reading and unused variable 'path'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 495d162374c472f46454453553382ad0735dc725
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 22:56:16 2008 +0100
- sbc8548: Fix cfi flash bank declaration
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4efbe9dbb129f857f27856936112c8c02f016be6
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Feb 27 11:02:26 2008 +0100
- [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
- Dual format image code must properly handle all three FDT passing methods:
- - raw FDT blob passed
- - FDT blob embedded in the legacy uImage
- - FDT blob embedded in the new uImage
- This patch enables proper raw FDT handling when no FIT imaeg support
- is compiled in. This is a bit tricky as we must dected FIT format even
- when FIT uImage handling is not enabled as both FIT uImages and raw FDT
- blobs use tha same low level format (libfdt).
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Feb 27 11:02:26 2008 +0100
- [new uImage] POWERPC: Add image_get_fdt() routine
- FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
- (3) or embedded in the new uImage. For the (2) case embedding image must be
- verified before we get FDT from it. This patch factors out legacy image
- specific verification routine to the separate helper routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit 1efd43601f90de21ec6c0ebb9880823e822927b1
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Feb 27 11:02:07 2008 +0100
- [new uImage] Add image_get_kernel() routine
- Legacy image specific verification is factored out to a separate helper
- routine to keep get_kernel() generic and simple.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Feb 27 11:01:04 2008 +0100
- [new uImage] Move image verify flag to bootm_headers structure
- Do not pass image verification flag directly to related routines.
- Simplify argument passing and move it to the bootm_header structure which
- contains curently processed image specific data and is already being passed
- on the argument list.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit 823afe7cefe00dafefc6696c1cc7aa828c394234
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Feb 27 11:00:47 2008 +0100
- [Makefile] Sort COBJS in lib_<arch> Makefiles
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Feb 27 11:00:47 2008 +0100
- [new uImage] Optimize gen_get_image() flow control
- When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
- to do, update its control flow to better reflect that simple case.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Mon Feb 4 08:28:17 2008 +0100
- [new uImage] POWERPC: Split get_fdt() into get and relocate routines
- PPC specific FDT blob handling code is divided into two separate routines:
- get_fdt() - find and verify a FDT blob (either raw or image embedded)
- fdt_relocate() - move FDT blob to within BOOTMAP if needed
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Kumar Gala <galak@kernel.crashing.org>
- commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Feb 25 13:13:37 2008 -0600
- 86xx: Fix renamed GUR symbols in sbc8641d board.
- Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
- (86xx: Fix GUR PCI config registers properly), we should have
- changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
- symbols in the sbc8641d board as well. Fix this oversight.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 64cd594e623c39f73964d18787763e4533f791f7
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Feb 25 16:50:48 2008 +0100
- ppc4xx: Fix acadia_nand build problem
- Don't include testdram() on NAND-booting target acadia_nand. This saves
- a few bytes and makes the target build clean again.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 14e099e698d41e8179d05c2b2dbcf704a236f748
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 24 23:03:12 2008 +0000
- mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 724902c8464e610642b3a170278b99710325888e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 24 23:03:11 2008 +0000
- arm-imx: Fix registers definition
- Sync registers definition with linux
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 4cd288b589ea1178947c6e364453c32b3dede6b7
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 24 23:03:10 2008 +0000
- actua1/actua2/actua3: Fix multipleunused variable
- - actua1:
- actux1.c: In function 'checkboard':
- actux1.c:92: warning: unused variable 'revision'
- - actua2:
- actux2.c: In function 'checkboard':
- actux2.c:100: warning: unused variable 's'
- actux2.c:99: warning: unused variable 'revision'
- actux2.c: In function 'reset_phy':
- actux2.c:130: warning: unused variable 'i'
- - actua3:
- actux3.c: In function 'checkboard':
- actux3.c:114: warning: unused variable 'revision'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit d5934ad7756f038a393a9cfab76a4fe306d9d930
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Mon Feb 4 08:28:09 2008 +0100
- [new uImage] Add dual format uImage support framework
- This patch adds framework for dual format images. Format detection is added
- and the bootm controll flow is updated to include cases for new FIT format
- uImages.
- When the legacy (image_header based) format is detected appropriate
- legacy specific handling is invoked. For the new (FIT based) format uImages
- dual boot framework has a minial support, that will only print out a
- corresponding debug messages. Implementation of the FIT specific handling will
- be added in following patches.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit b29661fc1151077776454288051bc9a488351ce8
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Feb 24 15:21:36 2008 +0100
- Coding style cleanup. Prepare v1.3.2-rc2 release candidate
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 00b48a48424894daa589d166d73277830b1c6ac4
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Feb 23 12:15:56 2008 +0100
- ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit b075d74efb70ff68c49a2532f26b56d6703b69c1
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Feb 23 17:24:16 2008 +0900
- Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
- ----------------------------------------------------------------
- Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
- Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
- 32bit targets.
- GCC can be made to warn about usage of long long types with ISO C90
- (-ansi), but only with -pedantic. You can write this in a way that even
- then it doesn't cause warnings, namely by:
- #ifdef __GNUC__
- __extension__ typedef __signed__ long long __s64;
- __extension__ typedef unsigned long long __u64;
- #endif
- The __extension__ keyword in front of this switches off any pedantic
- warnings for this expression.
- Signed-off-by: Olaf Hering <olh@suse.de>
- Cc: <linux-arch@vger.kernel.org>
- Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- ----------------------------------------------------------------
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 208acd112e6517b21fc30c420396902b103563ac
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Feb 23 17:07:57 2008 +0900
- cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
- This will reduce the build time.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Feb 23 17:05:00 2008 +0900
- cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
- This will reduce the build time.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Feb 23 16:58:41 2008 +0900
- cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
- This reduces the build time by ~10%. Here's the gth2_config example.
- BEFORE AFTER
- real 0m31.441s 0m27.833s
- user 0m24.766s 0m23.045s
- sys 0m10.425s 0m7.468s
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
- Author: Marcel Moolenaar <marcelm@juniper.net>
- Date: Fri Feb 22 10:48:07 2008 -0800
- make define2mk.sed work on FreeBSD
- In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
- the define2mk.sed script was identified as the source of the link
- failure on FreeBSD. The problem is that sed(1) does not always support
- the '+' operator. It isn't on FreeBSD. The attach patch implements the
- equivalent, using the '*' operator instead and should work everywhere.
- Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
- commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Feb 22 17:21:32 2008 +0100
- Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
- The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
- final traces of long-deprecated "ramdisk" kernel parm") makes these
- changes neccessary.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
- Author: Larry Johnson <lrj@acm.org>
- Date: Thu Feb 21 13:58:16 2008 -0500
- LM75 bug fix for negative temperatures
- When the LM75 temperature sensor measures a temperature below 0 C, the
- current driver does not perform sign extension, so the result returned is
- 256 C too high. This patch fixes the problem.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 5a910c224b13e413bda41922379add6d75c32da3
- Author: Heiko Schocher <hs@denx.de>
- Date: Thu Feb 21 18:33:45 2008 +0100
- IDS8247: update MAINTAINER entry.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
- Author: Heiko Schocher <hs@denx.de>
- Date: Thu Feb 21 18:31:15 2008 +0100
- Fix device tree for mgsuvd board.
- Rename the "scc" node in "ethernet" for the mgsuvd board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu Feb 21 14:23:42 2008 +0100
- lwmon5: enable hardware watchdog
- Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
- causing it to reboot the board if U-Boot does a long busy-wait with
- udelay(). Thus, for these boards we have to restart WD more
- frequently.
- This patch splits the busy-wait udelay() into smaller, predefined,
- intervals, so that the watchdog timer may be resetted with the
- configurable (CONFIG_WD_PERIOD) interval.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Feb 21 12:52:29 2008 +0100
- ppc4xx: Support for ATI Radeon 9200 card on sequoia
- Adds configuration option for ATI Radeon 9200 card
- support to sequoia config file. If CONFIG_VIDEO
- is enabled, TEXT_BASE should be changed to 0xFFF80000.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Feb 18 08:18:07 2008 -0600
- Remove duplicate defines for ARRAY_SIZE
- A few duplicate of the ARRAY_SIZE macro sneaked in since we put
- the define in common.h.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Feb 18 08:09:37 2008 -0600
- ppc: Allow boards to specify effective amount of memory
- For historical reasons we limited the stack to 256M because some boards
- could only map that much via BATS. However newer boards are capable of
- mapping more memory (for example 85xx is capable of doing up to 2G).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 18 05:24:13 2008 -0500
- include autoconf.mk before any other .mk files
- This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
- those .mk files can have make if statements based on the current config.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 18 05:10:07 2008 -0500
- error check autoconf.mk generation
- If any of the steps for generating autoconf.mk fail currently, they go
- unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
- This is simpler and more robust than placing '|| exit $$?' after every line.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 019895a8dee71a9f00da05c03e379f45d581b0fe
- Author: Stefano Babic <sbabic@denx.de>
- Date: Mon Feb 18 08:03:51 2008 +0100
- Fix bug in dependency checking
- By adding VERSION_FILE to the PHONY targets the script
- /tools/setlocalversion is always called and version_autogenerated.h
- is replaced only if the script find a modified source file.
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 98ba144ccc912eee90dd42699f023c497ce774c6
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Feb 18 14:35:43 2008 +0900
- Fix GPMC CS2 memory setup at apollon
- It disables the current map first
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 23:52:46 2008 +0100
- uli526x: Fix multiple differ in signedness and parentheses around comparison
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 16:58:04 2008 +0100
- MIPS: Fix CFG_NO_FLASH support
- - Fix flash_init call when CFG_NO_FLASH is used
- - Remove no more needed flash.c for qemu-mips
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sat Feb 16 02:40:18 2008 -0500
- easylogo: clean up some more and add -r (rgb) support
- Michael Hennerich added support for outputting an image in RGB format rather
- than forcing YUYV all the time. This makes obvious sense if the display you
- have takes RGB input rather than YUYV.
- Rather than hack in support for options, I've converted it to use getopt and
- cleaned up the argument parsing in the process.
- Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit f65c98129ccada3f7caf97d80395a95b84e911de
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Sat Feb 16 02:12:37 2008 -0500
- Makefile: add target for $(LDSCRIPT)
- If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
- then change into the board directory and try and create it. This allows you
- to generate the linker script on the fly based upon board defines (like the
- Blackfin boards do).
- There should be no regressions due to this change as the normal case is to
- already have a u-boot.lds file. If that's the case, then there's nothing to
- generate, and so make will always exit. The fix here is that if the linker
- script does not exist, the implicit rules take over and attempt to guess how
- to generate the file.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 5583cbf736474ef754e128a54fb78632f57b48fd
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Feb 21 17:27:49 2008 +0100
- [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 2242f5369822bc7780db95c47985bb408ea9157b
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Feb 21 17:27:41 2008 +0100
- [new uImage] Rename and move print_image_hdr() routine
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Feb 21 17:20:20 2008 +0100
- [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
- Introducing routines for parsing new uImage format bootm arguments:
- [<addr>]#<conf> - configuration specification
- [<addr>]:<subimg> - subimage specification
- New format images can contain multiple subimages of the same type. For example
- a single new format image file can contain three kernels, two ramdisks and a
- couple of FDT blobs. Subimage and configuration specifications are extensions
- to bootm (and other image-related commands) arguments' syntax that allow to
- specify which particular subimage should be operated on.
- Subimage specification is used to denote a particular subimage. Configurations
- are a bit more complex -- they are used to define a particualr booting setup,
- for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
- etc.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Feb 21 17:20:19 2008 +0100
- [new uImage] Add gen_get_image() routine
- This routine assures that image (whether legacy or FIT) is not
- in a special dataflash storage.
- If image address is a dataflash address image is moved to system RAM.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Feb 21 17:20:18 2008 +0100
- [new uImage] Pull in libfdt if CONFIG_FIT is enabled
- New uImage format (Flattened Image Tree) requires libfdt
- functionality, print out error message if CONFIG_OF_LIBFDT
- is not defined.
- New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
- This commit turns it on by default.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Mon Feb 18 23:16:35 2008 +0100
- CFI: Do not use uninitialized cmd_reset
- Do not use uninitialized cmd_reset; issue both AMD and Intel reset
- commands instead
- From a short test, it looks like AMD-style flash roms treat *any* unknown
- command write as a reset, at least when in CFI Query mode, so issuing the
- Intel reset command to AMD-style flashs seems safe (from the small sample I
- have), plus the 3-cycle magic sequence should kick the state machine into
- the right state even without a reset command. Since the AMD-style flashs
- require the unlock sequence for real operation, I chose to try the AMD reset
- command first, so that Intel flashs do no see an invalid command prior to
- the CFI query.
- I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
- plus Intel StrataFlash.
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Thu Feb 21 11:56:44 2008 +0100
- API: Add (c) and licensing notice to the public API header.
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Thu Feb 21 11:06:07 2008 +0100
- Fix CPU POST test failure
- The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
- ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
- by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
- This patch just saves the CR value before running the test code, so allowing
- it to do anything it wants with CR.
- Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
- Acked-by: Yuri Tikhonov <yur@emcraft.com>
- --
- commit d5908b093955415f3d340706378b991f911af671
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Feb 20 15:26:51 2008 -0600
- 8610HPCD: Document the flashbank selection switches.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a551cee99ad1d1da20fd23ad265de47448852f56
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Feb 20 14:22:26 2008 -0600
- 86xx: Fix GUR PCI config registers properly.
- Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
- I tried to "8610HPCD: Fix typos in two PCI setup registers", I
- botched it due to not realizing that 8610 and 8641 had different
- Global Utility Register defintions, one of which was like 85xx,
- and the other wasn't. Correct this problem by introducing two
- symbols, one for each 86xx SoC, but neither of which is named
- anything like 85xx.
- My bad. Lovely Wednesday with git bisect. You know.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit cb06eb961bdffc8728b38c242473d802e83ab2b4
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Feb 20 12:24:11 2008 -0600
- 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
- Without an actual supported video card hooked up, enabling
- the CONFIG_VIDEO by default just makes it look broken by
- routing all console output to the video card. Don't.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4d264eff4312f230776b913edade7ceb75f1b1e0
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jan 30 15:08:15 2008 -0600
- ColdFire: Fix missing code flash size for M5485EVB
- Signed-off-by: James Mahan <kmahan@freescale.com>
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Jan 30 15:04:42 2008 -0600
- ColdFire: Fix 5282 and 5271 interrupt mask bit
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Feb 19 12:31:08 2008 -0600
- 8610HPCD: Fix typos in two PCI setup registers.
- The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
- were erroneously present as 85xx names and values, leftover from
- the clone wars. Fix this by removing the 85xx cruft from the
- 86xx codebase.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Feb 18 14:01:56 2008 -0600
- 86xx: Convert sbc8641d to use libfdt.
- This is the proper fix for a missing closing brace in the function
- ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
- The ft_cpu_setup() function in mpc8641hpcn.c should have been
- removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
- but was missed. Only, the sbc8641d was nominally still using it.
- It all got ripped out, and the funcality that was in ft_board_setup()
- was refactored to remove the CPU portions into the new file
- cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
- Based loosely on an original patch from joe.hamman@embeddedspecialties.com
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 04efddc87c50c84f85dad5c331c634a6ce830a83
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 23:35:31 2008 +0100
- mpc86xx: Fix unused variable 'config' and 'immap'
- and remove useless CONFIG_DDR_INTERLEAVE
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 23:03:36 2008 +0100
- mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit b6f29c84c208a091f95a10cbc9852d729659ba20
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 14:15:31 2008 +0100
- s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 14:15:32 2008 +0100
- pxa: fix assignment from incompatible pointer type
- fix mmc_bread function prototype
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 64d792063fff90b8118179b092feee09fe5cae13
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 17 14:15:30 2008 +0100
- at91cap9adk: fix implicit declaration of function 'eth_init'
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Feb 17 15:43:44 2008 +0100
- Remove files added by mistake, update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
- Author: Mike Nuss <mike@terascala.com>
- Date: Wed Feb 6 11:10:11 2008 -0500
- PPC440EPx: Optionally enable second I2C bus
- The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
- PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
- code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
- Signed-off-by: Mike Nuss <mike@terascala.com>
- Cc: Stefan Roese <sr@denx.de>
- commit ef5b4f221c22d05770878513951745f236b5b43f
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Tue Feb 5 10:26:44 2008 +0100
- ppc4xx: HCU4/5. Cleanup configs
- - hcu4.h: Removed define of CONFIG_PPC405GPr
- - Corrected phy addresses
- - Fix boot variables
- - Respect line length of 80 chars
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 74973126d1be63ac75bdc192f46234dca3a7c421
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Tue Feb 5 11:31:28 2008 +0100
- ppc4xx: HCU4/5. Cleanups
- - Fix some coding style violations.
- - Use in/out_u16/32 where appropriate.
- - Use register names from ppc405.h.
- - Fix trace useage for Lauterbach.
- - Remove obsolete generation HCU2.
- - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Tue Feb 5 10:26:41 2008 +0100
- ppc4xx: PPC405GPr fix missing register definitions
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 214398d9cb22268d9d4f7563359edca0f78297a2
- Author: Larry Johnson <lrj@acm.org>
- Date: Fri Jan 18 21:49:05 2008 -0500
- ppc4xx: Beautify configuration files for Sequoia and Korat boards
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 30c6a241e88499f536e86d325759e29ba00ff67f
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Feb 15 20:09:01 2008 +0100
- Wipe out assembler warnings while compiling x86 biosemu
- This patch tries to get rid of some assembler warnings about
- changed .got2 section type while compiling x86 bios emulator
- code.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Feb 15 00:57:09 2008 +0100
- Prepare v1.3.2-rc1 release candidate
- commit f33e9653c9c09868995d788511d573771c209fe5
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Feb 15 00:13:20 2008 +0100
- Fix compile warning on lib_ppc/board.c
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Feb 14 18:22:04 2008 +0100
- Add Radeon Mobility 9200 pci device id to the radeon driver
- This patch extends PCI device id table of the
- radeon driver so that the driver will also support
- Radeon Mobility 9200 (M9+) based boards.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 1b8607e1f7143548c6062c28371449ec69588c00
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Feb 14 18:19:50 2008 +0100
- Extend ATI Radeon driver to support more video modes
- Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
- 800x600, 640x480 at 24, 16 and 8 bpp.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 4124382de029d361162a4b8cecc773eb8f26e2a8
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Feb 10 17:05:20 2008 +0100
- xsengine: fix typo and few coding style
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Fri Feb 8 21:25:58 2008 +0100
- Fix wrong memory limit calculation in memory-test
- If the length of the memory address range passed to the "mtest" command is
- not of the form 2^x - 1, not all address lines are tested. This bug is
- inherited from the original software at
- http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
- this.
- Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Feb 15 00:11:39 2008 +0100
- Coding STyle cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f6921e3dc331293c873ec4d109fd5517a42a90b3
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Feb 5 13:30:43 2008 +0900
- sh: Fix register address of SH7722
- The address of SH7722 is wrong by old document.
- This patch fixes this problem.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 17:44:23 2008 -0500
- only update version header as needed
- Constantly rebuilding the version header will force useless relinking, so we
- simply need to compare the new header with the existing one before updating
- it.
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 208447f8e953f347425eb92c8e28d59e6d911363
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Jan 28 05:56:19 2008 -0500
- Do not specify a CROSS_COMPILE default when executing size
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- Date: Wed Feb 13 11:19:19 2008 +0100
- Fix return value of mtest when CFG_ALT_MEMTEST set
- Fix a missing return statement from a non-void function.
- Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
- Author: Timur Tabi <timur@freescale.com>
- Date: Wed Jan 9 14:35:26 2008 -0600
- 85xx, 86xx: Determine I2C clock frequencies and store in global_data
- Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
- Update the get_clocks() function in 85xx and 86xx to determine the I2C
- clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Feb 14 23:18:01 2008 +0100
- TQM834x: clean up configuration
- Get board name consistent with Linux and elsewhere;
- get rid of local network definitions etc.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 38cc09c55b1d7f233789052c6fc462e5377669a9
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Feb 14 08:02:12 2008 +0100
- TFTP: fix search of ':' in BootFile
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0bc9efada170096c6b273f19165e32936d330d80
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Feb 14 22:46:55 2008 +0100
- Coding style cleanup; update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Feb 14 22:43:22 2008 +0100
- PPC: Use r2 instead of r29 as global data pointer
- R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
- will refuse to use load/store multiple insns; instead, it issues a
- list of simple load/store instructions upon function entry and exit,
- resulting in bigger code size, which in turn makes the build for a
- few boards fail.
- Use r2 instead.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3c234efa693bc59906c2be55c7918ecbb55392ea
- Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
- Date: Wed Jan 30 09:08:49 2008 +0100
- ARM: make the machid configurable via the environment
- If the variable "machid" exists, let do_bootm_linux use that instead
- of bd->bi_arch_number.
- Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
- commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Wed Jan 23 16:34:46 2008 +0200
- Use #ifdef CONFIG_FSLDMAFEC
- MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
- fails
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit 26c7bab81e08dc7bd696c48f753428a829629bd8
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Jan 19 10:25:59 2008 +0900
- common/miiphyutil.c: Cleanup MII_DEBUG and debug()
- Current MII_DEBUG is confusing in two ways. One is useless define-then-
- undef at the top of the file. The other is there is only one debug() in
- this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
- While there are many useful printf()/puts() debug codes, but they are for
- DEBUG, not for MII_DEBUG.
- This patch tries to put them all together into MII_DEBUG and debug().
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 751b9b5189f3274b03c809172631316d6b002c82
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Thu Jan 17 16:43:25 2008 +0900
- OneNAND Initial Program Loader (IPL) support
- This patch enables the OneNAND boot within U-Boot.
- Before this work, we used another OneNAND IPL called X-Loader based
- on open source. With this work, we can build the oneboot.bin image
- without other program.
- The build sequence is simple.
- First, it compiles the u-boot.bin
- Second, it compiles OneNAND IPL
- Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
- The mechanism is similar with NAND boot except it boots from itself.
- Another thing is that you can only use the OneNAND IPL only to work
- other bootloader such as RedBoot and so on.
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 21f6f9636f0e978397548751347425fbf8d42bb3
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Jan 16 13:06:59 2008 -0600
- Fix CONFIG_MMC usage in fat code
- A #if statement in fat.c depended on CONFIG_MMC, instead of
- defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
- as "1" rather than just defined. Now it's better.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Tue Jan 15 12:52:31 2008 +0100
- ppc: Refactor cache routines, so there is only one common set.
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jan 23 15:55:02 2008 -0600
- 86xx: Fix compilation warning in sys_eprom.c
- sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 65230107025733e89e28fd5e5cfd916d4953c28a
- Author: Haavard Skinnemoen <hskinnemoen at>
- Date: Fri Feb 22 11:40:50 2008 +0000
- Move AT91RM9200DK board support under board/atmel
- We already have a vendor subdir for Atmel, so we should use it.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
- commit 6d0943a6be99977d6d853d51749e9963d68eb192
- Author: Andreas Engel <andreas.engel@ericsson.com>
- Date: Mon Jan 14 09:06:52 2008 +0000
- ARM: cleanup duplicated exception handlingcode
- Move duplicated exception handling code into lib_arm.
- Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
- commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
- Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
- Date: Fri Feb 1 10:09:03 2008 +0000
- Support for Artila M-501 starter kit
- Kimmo Leppala / Sysart and
- Timo Tuunainen / Sysart
- commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
- Author: Stelian Pop <stelian@popies.net>
- Date: Mon Feb 11 10:50:19 2008 +0000
- AT91CAP9 support
- ---------------------------------
- read_dataflash() takes a signed char pointer as a parameter. Silence a
- few warnings dues to incorrect parameter types in env_dataflash.c.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu Feb 7 09:42:57 2008 +0000
- AT91CAP9 support : move board files to Atmel vendor directory.
- AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 7263ef191b87da94768f762c7093bedeb70db98f
- Author: Stelian Pop <stelian at>
- Date: Thu Jan 3 21:15:56 2008 +0000
- AT91CAP9 support : MACB changes
- Signed-off-by: Stelian Pop <stelian <at> popies.net>
- Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
- commit 6afcabf11d7321850f4feaadfee841488ace54c5
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu Feb 7 16:37:54 2008 +0000
- AT91CAP9 support : board/ files
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
- Author: Stelian Pop <stelian at>
- Date: Wed Jan 30 21:15:54 2008 +0000
- AT91CAP9 support : cpu/ files
- Signed-off-by: Stelian Pop <stelian <at> popies.net>
- commit fa506a926cec348805143576c941f8e61b333cc0
- Author: Stelian Pop <stelian@popies.net>
- Date: Thu Jan 31 21:15:53 2008 +0000
- AT91CAP9 support : include/ files
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit 20b197c6f2799af399a68f96a1aff543a75621b8
- Author: Stelian Pop <stelian@popies.net>
- Date: Sun Jan 20 19:49:21 2008 +0000
- AT91CAP9 support : build integration
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
- Author: Stelian Pop <stelian@popies.net>
- Date: Sun Jan 20 21:07:00 2008 +0000
- Improve DataFlash CS definition.
- Use a structure instead of the error prone unnamed array to
- define the possible dataflash banks.
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit a6cdd21b56014208706238712a853a9e9a0a2290
- Author: Stelian Pop <stelian@popies.net>
- Date: Sat Jan 19 21:09:35 2008 +0000
- Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
- Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
- cpu/arm926ejs/start.o: In function `cpu_init_crit':
- .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Fri Feb 1 16:50:24 2008 +0000
- Fix timer overflow in DaVinci
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Fri Feb 1 16:49:08 2008 +0000
- Update board NetStar
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- commit b7f6193e76651e1fd606e46eb11915b53cb6618b
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Tue Feb 5 10:26:42 2008 +0100
- ppc4xx: HCU4/5. Fix make O=../xx
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
- Author: Larry Johnson <lrj@acm.org>
- Date: Tue Jan 22 08:51:59 2008 -0500
- ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit fe891ecf4d187e9d11dde869ed4623af52b54451
- Author: Hiroshi Ito <ito@mlb.co.jp>
- Date: Thu Jan 31 18:35:04 2008 +0900
- NFS Timeout with large files.
- Retry to send NFS packet before reaching timeout.
- Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
- commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
- Author: Johannes Stezenbach <js@sig21.net>
- Date: Tue Jan 29 00:11:25 2008 +0100
- Add dependencies to avoid race conditions with parallel make.
- Signed-off-by: Johannes Stezenbach <js@sig21.net>
- commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Jan 28 05:46:01 2008 -0500
- Mark board_init_[fr] as noreturn
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 161b2af4d7b48fd602ce333c355a4df0337892bb
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Jan 28 05:28:50 2008 -0500
- Only use TEXT_BASE if defined by the board
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 1b769881750030f10743808b9d6013e11f559350
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Jan 25 07:54:47 2008 +0100
- Fix remaining CONFIG_COMMANDS
- update comments
- Fix coding style
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Mon Jan 21 16:46:00 2008 +0100
- Add *~ to .gitignore
- One should never add a backup file ending in with ~ to the git repository.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 00:02:10 2008 -0600
- Remove duplicate defines for ARRAY_SIZE
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c77ce474b1c57b13e9d36d9830f147966c143694
- Author: Stelian Pop <stelian@popies.net>
- Date: Mon Jan 14 22:08:14 2008 +0100
- Fix incorrect address test in AT91F_DataflashSelect().
- Signed-off-by: Stelian Pop <stelian@popies.net>
- commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Feb 13 15:09:58 2008 -0600
- Fix building of fdt_support.c if DEBUG set
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Feb 12 14:53:28 2008 -0600
- Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
- These replace direct structure references for IMMR sections.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit c62776be8dca4097ca03d4f9415f08d4887b45d0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Feb 12 00:45:06 2008 +0100
- Get rid of "#undef DEBUG" from board config files.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Jan 15 17:09:41 2008 -0600
- Remove #undef DEBUG from MPC83xx board header files
- Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
- The inclusion of this line makes it impossible to enable debug code in
- other source files, because "#define DEBUG" typically needs to be defined
- before any header files are included.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 69018ce2e086e9caf35b914d675b82bc4888f077
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 08:25:45 2008 -0600
- QE: Move FDT support into a common file
- Move the flat device tree setup for QE related devices into
- a common file shared between 83xx & 85xx platforms that have QE's.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5cf746c303710329f8040d9c62ee354313e3e91f
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:59:09 2008 +0100
- [new uImage] Move kernel data find code to get_kernel() routine
- Verification of the kernel image (in old format) and finding kernel
- data is moved to a dedicated routine. The routine will also hold
- support for, to be added, new image format.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 7b325454fd231d4273de3fe373850f777fb086bf
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:58:20 2008 +0100
- [new uImage] Cleanup FDT handling in PPC do_boot_linux()
- Move FDT blob finding and relocation to a dedicated
- get_fdt() routine. It increases code readability and
- will make adding support for new uImage format easier.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:58:13 2008 +0100
- [new uImage] Cleanup do_botm_linux() boot allocations
- This patch moves common pre-boot allocation steps shared between PPC
- and M68K to a helper routines:
- common:
- - get_boot_sp_limit()
- - get_boot_cmline()
- - get_boot_kbd()
- platform:
- - set_clocks_in_mhz()
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:57:17 2008 +0100
- [new uImage] Move ramdisk loading to a common routine
- Ramdisk loading code, including initrd_high variable handling,
- was duplicated for PPC and M68K platforms. This patch creates
- common helper routine that is being called from both platform
- do_bootm_linux() routines.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:55:53 2008 +0100
- [new uImage] Removed dead ramdisk code on microblaze architectures
- Microblaze do_bootm_linux() includes ramdisk processing code but
- the ramdisk does not get used anywhere later on.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 5ad03eb3854c162684222a718b44c0716ea0db03
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:55:39 2008 +0100
- [new uImage] Factor out common image_get_ramdisk() routine
- Architecture specific do_bootm_linux() routines share common
- ramdisk image processing code. Move this code to a common
- helper routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:08 2008 +0100
- [new uImage] Move FDT error printing to common fdt_error() routine
- FDT error handling in PPC do_bootm_linux() shares the same message format.
- This patch moves error message printing to a helper fdt_error() routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 42b73e8ee00d48004791dea64b8093fb974c57e1
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:07 2008 +0100
- [new uImage] Factor out common routines for getting os/arch/type/comp names
- Move numeric-id to name translation for image os/arch/type/comp header
- fields to a helper routines: image_get_os_name(), image_get_arch_name(),
- image_get_type_name(), image_get_comp_name().
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit e99c26694a384221d336f6448c06a57479c0baa4
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:07 2008 +0100
- [new uImage] Remove standalone applications handling from boootm
- Standalone applications are supposed to be run using the "go" command.
- This patch removes standalone images handling from the do_bootm().
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:07 2008 +0100
- [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
- Support for OF_FLAT_TREE is to be obsoleted in the near future,
- remove related code from the bootm routines.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 82850f3d32a2661868ec6876bed7a22c55cef718
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:06 2008 +0100
- [new uImage] Use image API in SH do_bootm_linux() routine
- Introduce image handling API for lately added Hitachi SH architecture.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 4a995edec1ac163d9326d143ffe2b47e7543407f
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:06 2008 +0100
- [new uImage] Rename architecture specific bootm code files
- Implementation of the do_bootm_linux() and other bootm helper routines is
- architecture specific code. As such it resides in lib_<arch> directories
- in files named <arch>_linux.c
- This patch renames those files to a more clear and accurate
- lib_<arch>/bootm.c form.
- List of the renamed files:
- lib_arm/armlinux.c -> lib_arm/bootm.c
- lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
- lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
- lib_i386/i386_linux.c -> lib_i386/bootm.c
- lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
- lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
- lib_mips/mips_linux.c -> lib_mips/bootm.c
- lib_nios/nios_linux.c -> lib_nios/bootm.c
- lib_nios2/nios_linux.c -> lib_nios2/bootm.c
- lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
- lib_sh/sh_linux.c -> lib_sh/bootm.c
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 7582438c285bf0cef82909d0f232de64ec567a8a
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:20:06 2008 +0100
- [new uImage] Return error on image move/uncompress overwrites
- Check for overwrites during image move/uncompress, return with error
- when the original image gets corrupted. Report clear message to the user
- and prevent further troubles when pointer to the corrupted images is passed
- to do_bootm_linux routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit f13e7b2e993c61fed1f607962501e051940d6e80
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:12:17 2008 +0100
- [new uImage] Cleanup image header pointer use in bootm code
- - use single image header pointer instead of a set of auxilliary variables.
- - add multi component image helper routines: get component size/data address
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:17:10 2008 +0100
- [new uImage] Cleanup cmd_bootm.c
- - sort and cleanup headers, declarations, etc.
- - group related routines
- - cleanup indentation, white spaces
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit af13cdbc01eaf88880978bfb4f603e012818ba24
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:45 2008 +0100
- [new uImage] Add memmove_wd() common routine
- Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:44 2008 +0100
- [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 15158971f49255ccef54f0979a942cfd3de2ae52
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:44 2008 +0100
- [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
- Use image header copy instead of a (possibly corrupted) pointer to
- a initial image location.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:44 2008 +0100
- [new uImage] Remove I386 uImage fake_header() routine
- I386 targets are not using a uImage format, instead fake header
- is added to ram image before it is further processed by bootm.
- Remove this fixup and force proper uImage use for I386.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 559316faf7eae0614c91d77f509b57d6c4c091ba
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:44 2008 +0100
- [new uImage] Move CHUNKSZ definition to image.h
- CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
- move this definition to a common header.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:43 2008 +0100
- [new uImage] Move gunzip() common code to common/gunzip.c
- Move gunzip(), zalloc() and zfree() to a separate file.
- Share zalloc() and zfree() with cramfs uncompress routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit d45d5a18b6b36688f2365623f9d550566c664b5b
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:43 2008 +0100
- [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
- Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
- readable in PPC variant of do_bootm_linux() routine.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:11:43 2008 +0100
- [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
- PPC implementation of do_bootm_linux() routine is moved to
- a dedicated file lib_ppc/ppc_linux.c
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Tue Jan 8 18:14:09 2008 +0100
- [new uImage] Define a API for image handling operations
- - Add inline helper macros for basic header processing
- - Move common non inline code common/image.c
- - Replace direct header access with the API routines
- - Rename IH_CPU_* to IH_ARCH_*
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit ed29bc4e8142b46b626f67524207b36e43d9aad6
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Jan 31 13:19:58 2008 +0100
- Add missing cmd_ximg.o to common/Makefile
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Mon Jan 28 10:15:02 2008 +0100
- ADS5121e: DDR2 init/timing update.
- Signed-off-by: John Rigby <jrigby@freescale.com>
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit ac9152830d7fdebace8a260b7737ef2870c21ca0
- Author: John Rigby <jrigby@freescale.com>
- Date: Wed Jan 30 13:36:57 2008 -0700
- Device tree updates
- Changes to match 5121 device tree going mainline in 2.6.25.
- Change OF_SOC from "soc5121" to plain "soc".
- Remove unneeded "ref-frequency" fixups.
- Remove "address" enetaddr fixup.
- Add bus-frequency fixup for old OF_SOC so old
- kernels with old device trees will work with new
- u-boot with 66MHz IPS clock
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit de55d18df3ff2ea614624e74793de7c43520e0e7
- Author: John Rigby <jrigby@freescale.com>
- Date: Wed Jan 30 13:36:56 2008 -0700
- Change IPS freq to 66MHz
- Recommended frequency is 66MHz
- Change divider from 4 to 3.
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Jan 14 22:38:55 2008 +0100
- xsengine: rename board_post_init to board_late_init
- missing migration from "Cleanup of some init functions"
- in c837dcb1a316745092567bfe4fb266d0941884ff
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8dafa87476b0d7170e219c2f5e3842c833a91807
- Author: Larry Johnson <lrj@acm.org>
- Date: Sat Jan 12 23:35:33 2008 -0500
- Add attribute POST_PREREL to ECC memory POST
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 08:25:45 2008 -0600
- QE: Move FDT support into a common file
- Move the flat device tree setup for QE related devices into
- a common file shared between 83xx & 85xx platforms that have QE's.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit d38da537943cd36356b9d3d9d9b60533554b81d8
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed Jan 23 17:20:14 2008 +0100
- AVR32: Make SDRAM refresh rate configurable
- The existing code assumes the SDRAM row refresh period should always
- be 15.6 us. This is not always true, and indeed on the ATNGW100, the
- refresh rate should really be 7.81 us.
- Add a refresh_period member to struct sdram_info and initialize it
- properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
- panic() until the refresh_period member is updated properly.
- Big thanks to Gerhard Berghofer for pointing out this issue.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 61151cccb660cdb06a07fb283de6089913d7bde0
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Apr 19 10:10:11 2007 +0200
- ATSTK1000: Fix potential flash programming bug
- The (now obsolete) atngw100 flash programming code was having problems
- programming the onboard at49bv642 chip. The atstk1000 flash
- programming code may have the same bug, so import fix for this problem
- from the AVR32 Linux BSP.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Nov 22 17:04:13 2007 +0100
- ATSTK1004: Fix comment about default load address
- The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
- wouldn't have worked anyway since the board can only access 4MB of
- SDRAM.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 8269ab53608d8db2aa06969c337ab0b0518211e5
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Nov 22 17:01:24 2007 +0100
- ATSTK1002: Use SDRAM + 4MB as default load address
- Many people run into problems when they compile a big kernel and load
- the uImage at the default SDRAM + 2MB address as the kernel will
- overwrite the uImage as it is being unpacked. Increase the default
- load address so that we can load a 4MB kernel image without any
- problems.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 2bcacc2d841b77f3d2d3910db722003742727e9f
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Nov 22 16:51:39 2007 +0100
- ATNGW100: Fix default mtest range
- Let mtest cover the whole SDRAM except the last megabyte, which is
- where u-boot lives.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jan 22 15:31:56 2008 +0900
- sh: Fix register address of SH7722.
- The address of SH7722 is wrong by old document.
- This patch fixes this problem.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:57 2008 -0500
- new command for displaying strings at specified memory locations
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:57 2008 -0500
- rewrite/cleanup Blackfin RTC driver
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:57 2008 -0500
- generate u-boot.ldr for Blackfin targets
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit b779f7a59530436040f157f7841db7ab796542df
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:57 2008 -0500
- scrub unused symbols
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit cc2977acc3bbbb7850f16645dd1081f95335868d
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:57 2008 -0500
- move Blackfin cpu object list to respective cpu directories
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:57 2008 -0500
- interface to Blackfin on-chip One-Time-Programmable memory
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:56 2008 -0500
- add support for memory commands with Blackfin L1 instruction memory
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:56 2008 -0500
- use C code rather than inline assembly
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:56 2008 -0500
- add Blackfin-specific reginfo command
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 0858b835e7ea501ea084d34cef75932f098342bb
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:55 2008 -0500
- add support for Blackfin symbol prefixes to examples
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 8dc48d71a4be753ea9f84956cd33600de35fad04
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:55 2008 -0500
- add Blackfin-specific bdinfo command
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:55 2008 -0500
- move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:55 2008 -0500
- unify the Blackfin board targets
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit d4d7730853e5d675f76ec666807da3028c91d592
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:55 2008 -0500
- punt Blackfin VDSP headers and import sanitized/auto-generated ones
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:54 2008 -0500
- always pull in asm/blackfin.h for Blackfin ports
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:54 2008 -0500
- add missing __raw versions of Blackfin read/write io functions
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:54 2008 -0500
- add the default Blackfin logo used by Blackfin boards with splash screens
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:54 2008 -0500
- add some more Blackfin docs
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:54 2008 -0500
- make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit 4087bc88cebec75c432a7fe9f6afb545b0919831
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:54 2008 -0500
- fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit b45264ee85cbd92020640a32e02fb434fd557108
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Feb 4 19:26:53 2008 -0500
- add gitignores for Blackfin pieces
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Jan 18 01:14:03 2008 +0100
- TFTP: add host ip addr support
- allow to use a different server as set in serverip
- add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
- if not defined the max length will be at 128
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit e56b4b494cd92def577969f9678395aa22d34c9f
- Author: Timur Tabi <timur@freescale.com>
- Date: Wed Jan 9 14:35:26 2008 -0600
- 85xx,86xx: Determine I2C clock frequencies and store in global_data
- Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
- Update the get_clocks() function in 85xx and 86xx to determine the I2C
- clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Dec 27 10:56:54 2007 +0100
- OMAP5912: fix FIFO handling in UART driver
- According to the OMAP5912 Serial Interfaces Reference Guide (see
- http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
- FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
- changed when the baud clock is not running, i. e. when both DLL and
- DLH are set to 0.
- Thus make sure that DLL and DLH are 0 when writing the FCR.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 15:10:52 2007 +0100
- ARM: S3C24x0 SoC NAND controller support
- This patch adds NAND support to the S3C24x0 SoC code in u-boot
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 14:24:40 2007 +0100
- ARM: s3c24xx: Multiple serial port support
- This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit a25f72f1f73a11de68251fb88c89991e202e68fa
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 14:16:57 2007 +0100
- ARM: arm920t: Allow use of 'gd' pointer from IRQ
- This patch allows us to use the 'gd' pointer (and thus environment
- and everything else associated with it) from interrupt context on
- arm920t.
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit be19bd5cd0f454b63298844a0b5377e029b2caad
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 14:19:38 2007 +0100
- ARM: arm920/s3c24xx: IRQ demulitplexer callback
- This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
- plus a stub implementation of it for the S3C2410.
- The purpose is to allow arm920t implementations such as the s3c24x0 to
- implement interrupt handlers in u-boot without having to touch core
- arm920t code.
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
- Author: Hebbar <gururajakr@sanyo.co.in>
- Date: Tue Dec 18 16:03:07 2007 -0800
- ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
- Add ifdef to bdinfo command to display ethernet information
- only if CONFIG_CMD_NET is defined for arm modules.
- Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
- Author: Hebbar <gururajakr@sanyo.co.in>
- Date: Tue Dec 18 16:00:54 2007 -0800
- ARM: add I2C init function call in lib_arm/board.c
- Adds I2C init func call to init sequence for ARM boards. This is
- present in ppc,blackfin and other processor init sequence.
- Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
- commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Feb 1 09:38:29 2008 +0100
- ppc4xx: Fix ndfc HW ECC byte order
- The current ndfc HW ECC implementation swaps the first two ECC bytes.
- But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
- so this swapping in the HW ECC driver is bogus. This patch fixes this
- problem and now really uses the SMC ECC byte order.
- Thanks to Sean MacLennan for pointing this out.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 30 15:35:50 2008 +0100
- ppc4xx: Fix GPIO configuration for pcs440ep
- The SRD0_PFC0 register was not configured correctly to enable the GPIO's
- 49-63 for GPIO. They have been configured as trace signals. This patch
- fixes this by clearing the corresponding bit.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 30 14:48:28 2008 +0100
- ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
- Author: Ladislav Michl <ladis@linux-mips.org>
- Date: Fri Dec 7 00:42:32 2007 +0100
- ARM: Board voiceblue update
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
- Author: Ladislav Michl <ladis@linux-mips.org>
- Date: Thu Dec 6 23:24:57 2007 +0100
- ARM: AT91RM9200 based boards config cleanup
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
- indentation.
- commit 481f28b1db5cd21deb55f69399ba240e107af4c7
- Author: Ladislav Michl <ladis@linux-mips.org>
- Date: Thu Dec 6 22:59:16 2007 +0100
- ARM: Fix at91rm9200dk base address
- Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
- renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
- with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
- However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
- CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
- I'm sending this patch 4th (!) time in hope it produces at least some
- reaction.
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Fix at91rm9200dk base and environment address.
- commit c95219fae2a7add7daa2f91aedca65b1698465c7
- Author: stefano babic <sbabic@denx.de>
- Date: Tue Nov 20 10:40:24 2007 +0100
- MMC for PXA 27X (resubmit)
- MMC support for X_Scale PXA is broken and does not work.
- Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
- There were already some patches around the world but none of them was
- merged into the official u-boot tree.
- This patch makes order fixing this issue. Resubmit after code cleanup.
- Applied and tested on PXA 270 (TrizepsIV module).
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
- Author: stefano babic <sbabic@denx.de>
- Date: Tue Nov 20 10:37:04 2007 +0100
- Fix gcc issues in pxa-regs.h
- Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
- issues generates wrong code.
- (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
- This patch fixes the problem and solves the gcc-4 issues as the linux
- kernel does.
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
- commit 7047b388876e7b905b2ec4edb8010543e3641b85
- Author: Jens Gehrlein <sew_s@tqs.de>
- Date: Tue Jan 29 08:45:03 2008 +0100
- TQM834x: enable DHCP
- Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
- Author: Jens Gehrlein <sew_s@tqs.de>
- Date: Tue Jan 29 08:45:02 2008 +0100
- TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
- Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8931ab176025b03cfc320b3fd1eca432a88ed560
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Sat Jan 26 23:41:19 2008 -0500
- Fix conditional compilation of mpx8xxx_spi driver
- This driver should only compile if CONFIG_MPC8XXX_SPI is set
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 63f732d3d3880feb531f48af247c025bf01462b0
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Tue Jan 29 17:00:34 2008 +0100
- API: Provide dummy halt() in the glue layer.
- This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Tue Jan 29 16:57:38 2008 +0100
- API: Convert conditional building to the new scheme.
- This fixes a build breakage with CONFIG_API enabled, which appeared after
- the recent changes in the U-Boot build system.
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit 98b742489c09780be6a832eeaa4e5eff824792bb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jan 25 09:56:17 2008 +0100
- inka4x0: remove dead code
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:06 2008 -0600
- 86xx: Add reginfo command
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit ddcebcb638715a6278da93b553d5016f99823816
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:05 2008 -0600
- 86xx: Add print_laws function to fsl_law.c
- This can be used for debug, and will be used by board code
- to help implement reginfo.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:04 2008 -0600
- 86xx: Remove old-style law setup code
- This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 713d8186649dae874613d495b0cecaa039a98b30
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:03 2008 -0600
- 86xx: Convert sbc8641d to use new law setup code.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 031976f6364b93833e989f57e9f1e023e0be8c4c
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:02 2008 -0600
- 86xx: Convert mpc8610hpcd to new law setup method.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 4933b91f8a49e436681f163df3173beb91cac44a
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:01 2008 -0600
- 86xx: Support new law setup method and convert mpc8641
- Adds the support code in cpu/mpc86xx for the new law setup code
- recently created fsl_law.c, and changes the MPC8641HPCN config
- to use this code.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
- Author: Becky Bruce <becky.bruce@freescale.com>
- Date: Wed Jan 23 16:31:00 2008 -0600
- 86xx: Rearrange the sequence in start.S
- * split the BAT initialization so that only 2 BATs (for the boot page
- and stack) are programmed very early on. The rest are initialized later.
- * Move other BAT setup, ccsrbar setup, and law setup later in the code
- after translation has been enabled.
- These changes will facilitate the moving of law and BAT initialization
- to C code, and will aid with 36-bit physical addressing support.
- Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
- commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 23 14:41:37 2008 +0100
- Coding Style Cleanup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 23 14:31:17 2008 +0100
- Coding Style Cleanup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Jan 18 10:07:04 2008 +0800
- mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
- The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
- cause the 83xx immap broken, so the DMA and PCI will
- be failed.
- The patch fix the struct spi8xxx and rm struct spi83xx.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Apr 14 17:11:49 2007 +0200
- AVR32: ATNGW100 board support
- Add support for the ATNGW100 Network Gateway reference design,
- including flash, ethernet and MMC support.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit e006927a0b9a54e8ee7685d8ac748aaad6801862
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Nov 24 18:15:31 2007 +0100
- AVR32: Initialize ipaddr, loadaddr and bootfile at startup
- I don't know why the relevant layers can't do this by itself, but this
- is what ppc does.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 799891ef7b1b3432032ec23466df6b665a797fa4
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Fri Jan 18 00:04:28 2008 +0100
- Add AcTux board support
- Hi,
- The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
- files that
- contain changes for multiple boards, the board-specific files follow as
- separate patches.
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- commit 66a4344a4d910a11125df7768899ad529719855e
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Wed Jan 16 19:53:23 2008 +0100
- add AcTux-4 board support
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- commit bc24345e4101a5c996d6b48ce497b09c53025dc6
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Wed Jan 16 19:51:55 2008 +0100
- add AcTux-3 board support
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- commit aebf00fc4d1343b24715373893f7b20bf462d1e9
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Wed Jan 16 19:51:14 2008 +0100
- add AcTux-2 board support
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- commit ea99e8f05b7240fd657739e286664664ae160abe
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Wed Jan 16 19:50:37 2008 +0100
- add AcTux-1 board support
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Jan 14 19:20:08 2008 +0100
- ARM: remove useless function board_post_init
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 96bd462942022e4569b582c072a0ed26de1cd19b
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Thu Jan 10 14:59:46 2008 +0100
- IXP: enable RTS
- enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
- No handshaking is done, but the active RTS signal allows to
- connect to the target using a PC which is using RTS/CTS
- handshake, and does no harm if the PC is set to ignore RTS.
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Jan 7 08:41:34 2008 +0100
- IXP: add dynamic microcode addr
- allow to load the microde from flash or ram by download it through
- the serial or other.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Sat Nov 10 15:44:12 2007 +0100
- load ixp42x NPE firmware from separate flash block, remove dead code
- Hi,
- the following patch adds support to move the IXP42X NPE firmware to a
- separate flash block, whose start address is defined in
- CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
- NPE-enabled u-boot without copyright problems due to the NPE firmware.
- I hope the patch applies, I get whitespace-related differences in the NPE
- files due to trailing whitespace in the original versions.
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 14:15:46 2008 -0600
- ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 14:02:49 2008 -0600
- ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 777d1abd9796f1c2e148417cc10657e847d318ce
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 14:00:25 2008 -0600
- ColdFire: Add MCF547x_8x FEC driver
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 13:54:09 2008 -0600
- ColdFire: Add MCF547x_8x dma code and header files
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 13:52:03 2008 -0600
- ColdFire: Add MCF547x_8x dma code - 2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 13:48:52 2008 -0600
- ColdFire: Add MCF547x_8x dma code - 1
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 13:39:44 2008 -0600
- ColdFire: Add MCF547x_8x related header files
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Tue Jan 15 13:37:34 2008 -0600
- ColdFire: Add MCF547x_8x cpu arch
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit e2756f4b54aba0e0523b81dd145666829cf7fd59
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:47:23 2008 -0600
- ColdFire: Add MCF5227x cpu and M52277EVB support-3
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit c87581027994c148131b2f11aa75501f782ec19a
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:46:19 2008 -0600
- ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:43:33 2008 -0600
- ColdFire: Add MCF5227x cpu and M52277EVB support-1
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:35:44 2008 -0600
- ColdFire: Fix CFI Flash low level Read/Write macro
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:23:08 2008 -0600
- ColdFire: Add M5373EVB platform support - 2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:19:54 2008 -0600
- ColdFire: Add M5373EVB platform support - 1
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:17:03 2008 -0600
- ColdFire: Update FlexBus CS for MCF532x
- Definition update and change from 16bit to 32bit
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:11:47 2008 -0600
- ColdFire: PCI and misc updates for MCF5445x
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 17:06:55 2008 -0600
- ColdFire: MCF5445x header files cleanup
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 16:59:42 2008 -0600
- ColdFire: MCF532x header files cleanup
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Signed-off by: John Rigby <jrigby@freescale.com>
- commit 7af7751d047e74b2ec58400f97b879c56446b3e8
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jan 14 15:30:15 2008 -0600
- ColdFire: Add modules header files
- Add CF specific modules header files
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Jan 17 12:48:00 2008 -0600
- codingstyle cleanup for spi driver
- ..and rm unused CONFIG_FSL_SPI define
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit d59feffb42c9f174116db7a82a311df98983dfce
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Wed Jan 16 17:12:12 2008 -0500
- FSL: Fix common EEPROM_data structure definition
- - Fix EEPROM_data structure definition according to System EEPROM Data Format.
- - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
- bd->bi_ethaddr.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit 6bee764bd6da510a4aad614880300c968bc7318d
- Author: Timur Tabi <timur@freescale.com>
- Date: Wed Jan 16 15:48:12 2008 -0600
- 86xx: enable command-line editing
- Enable command-line editing for all MPC86xx boards.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Wed Jan 16 22:37:42 2008 -0500
- Implement hard SPI driver on MPC8349EMDS
- This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
- This board has an ST M25P40 4Mbit EEPROM on its SPI bus
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Wed Jan 16 22:37:35 2008 -0500
- Add support for a Freescale non-CPM SPI controller
- This patch adds support for the SPI controller found on Freescale PowerPC
- processors such as the MCP834x family. Additionally, a new config option,
- CONFIG_HARD_SPI, is added for general purpose SPI controller use.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit a8cb43a89be6cfd283257a603dd9841503ccce0f
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 17 18:23:19 2008 +0800
- mpc83xx: Fix the fatal conflict of merge
- The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
- will cause the mpc8315erdb board can't boot up.
- The patch fix that bug, and remove the duplicated #ifdef
- CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
- MPC8313E processor.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 3259eeaa4148125a81417477f62c05bd67f60587
- Author: Larry Johnson <lrj@acm.org>
- Date: Thu Jan 17 08:50:09 2008 -0500
- Merge Sequoia beautification into Korat code
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit e16925773211291b562e77187061e9dd1d757217
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Jan 17 07:45:05 2008 +0100
- net: add 'ethrotate' environment variable
- [PATCH] net: add 'ethrotate' environment variable
- This patch replaces the buildtime configuration option
- CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
- configuration veriable. See README.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 17 14:29:04 2008 +0100
- ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Jan 17 18:07:32 2008 +0900
- sh: Remove CONFIG_COMMANDS from MS7720SE config file
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 055606bd25e88c0cd04ad348a679a04b1b616bee
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Wed Jan 16 18:39:20 2008 +0100
- ppc4xx: Netstal HCU4 board: added various fixes and POST
- - Moved some common code to netstal/common/nm_bsp.c.
- - sdram initialisation goes go netstal/common/fixed_sdram.c.
- - Added support for POST.
- - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 69b0634a4ee98c9791815600d43b99f626a952f3
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Thu Jan 17 12:53:56 2008 +0100
- ppc4xx: netstal/common define routines used by all boards
- Added some routines used by all Netstal boards:
- - nm_bsp.c: - nm_show_print and
- - common_misc_init_r
- - set_params_for_sw_install. Very specific code to handle our SW
- installation procedure
- - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
- to handle sdram initialization.
- - nm.h: Common header
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Wed Jan 16 18:39:18 2008 +0100
- ppc4xx: Netstal HCU5 board: added various fixes and POST
- - Moved some common code to nestal/common/nm_bsp.c.
- - Added support for the vxWorks EDR.
- - Enable trace for Lauterbach, if present.
- - Added support for POST.
- - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 4371090e5da77edc7bf9f296364db4801639d9c4
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Wed Jan 16 18:39:08 2008 +0100
- ppc4xx: Netstal HCU5 board. Added POST. Various fixes
- - Various fixes
- - Reduced rom_size from 384 to 320 kB
- - Environment is now in flash
- - Added POST
- - Support for OF
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Wed Jan 16 18:37:50 2008 +0100
- ppc4xx: Netstal HCU4 board. Added POST. Various fixes
- - Various fixes
- - Reduced rom_size from 384 to 320 kB
- - Environment is now in flash
- - Added POST
- - Support for OF
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Jan 17 10:53:08 2008 +0100
- ppc4xx: Complete DU440 board support
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Jan 17 10:52:30 2008 +0100
- ppc4xx: Add DU440 board support
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit ac331da07db3860f11fa1d0fd3db7c810bce1198
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Jan 17 15:53:52 2008 +0900
- sh: Update SuperH SCIF driver
- This patch fixed wrong SH7720 CPU macro and changed macro that
- calculated value of SCBRR register.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Wed Jan 16 15:12:47 2008 +0100
- Set ips dividor to 1/4 of csb clock.
- Previous setting cause ips clock to be out of spec. This bug was found by John
- Rigby from Freescale.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 02:19:18 2008 -0600
- 85xx: Get ride of old TLB setup code
- Now that all boards have been converted, remove old config code and the
- config option for the new style.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 02:02:10 2008 -0600
- 85xx: Convert TQM85xx to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 74121b470c14f7eaf284ee838bffca6f9521069e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 01:56:32 2008 -0600
- 85xx: Convert STXGP3 & STXSSA to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 01:44:34 2008 -0600
- 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 818218bac6a11591e2542c344d2330e0f4e1968b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 01:31:34 2008 -0600
- 85xx: Convert PM854/PM856 to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 01:25:33 2008 -0600
- 85xx: Convert MPC8540EVAL to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 01:12:22 2008 -0600
- 85xx: Convert MPC8568 MDS to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 01:01:09 2008 -0600
- 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 00:52:29 2008 -0600
- 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 17 00:32:17 2008 -0600
- 85xx: Convert ATUM8548 to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 23:11:57 2008 -0600
- 85xx: Convert MPC8544 DS to new TLB setup
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 22:38:34 2008 -0600
- 85xx: Reworked initial processor init
- Reworked the initial processor initialzation sequence:
- * introduced cpu_early_init_f that is run in address space 1 (AS=1)
- * Moved TLB/LAW and CCSR init into cpu_early_init_f()
- * Reworked initial asm code to do most of the core init before TLBs
- The main reasons for these changes are to allow handling of 36-bit phys
- addresses in the future and some of the issues that will exist when we
- do that.
- There are a few caveats on what can be initialized via the LAW and TLB
- static tables:
- * TLB entry 14/15 can't be initialized via the TLB table
- * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
- the code that is currently executing.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 44a23cfd6360a68eaa41f945190618a55519eac3
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 22:33:22 2008 -0600
- 85xx: Introduce new tlb API
- Add a set of functions to manipulate TLB entries:
- * set_tlb() - write a tlb entry
- * invalidate_tlb() - invalidate a tlb array
- * disable_tlb() - disable a variable size tlb entry
- * init_tlbs() - setup initial tlbs based on static table
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit be88b1699863c262818f3af7f60173b4d48df8fc
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 17 07:50:17 2008 +0100
- ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 10:04:42 2008 -0600
- 85xx: Use proper defines for PCI addresses
- We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
- While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
- be used for configuring the PCI ATMU.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 54a5070115eff38e9b324b78abdfa0b4520580b9
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 09:22:29 2008 -0600
- 85xx: Remove old style of LAW init
- All boards are now using the new fsl_law code so we can drop the old version.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 09:15:29 2008 -0600
- 85xx: convert remaining 85xx boards over to use new LAW init code
- Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
- to use new LAW init code.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 572b13afc42710f2957c382a710360429c0e099b
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 09:11:53 2008 -0600
- 85xx: convert STXGP3/STXSSA over to use new LAW init code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 45f2166ac0233a9263058378f39612bd11f61196
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 09:06:48 2008 -0600
- 85xx: convert PM854/PM856 over to use new LAW init code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 09:05:27 2008 -0600
- 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 01:45:10 2008 -0600
- 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 01:32:06 2008 -0600
- 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 01:16:16 2008 -0600
- 85xx: convert MPC8544 DS over to use new LAW init code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 83d40dfd79fe868796275802f60116d84b9e4395
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Jan 16 01:13:58 2008 -0600
- 85xx: Move LAW init code into C
- Move the initialization of the LAWs into C code and provide an API
- to allow modification of LAWs after init.
- Board code is responsible to provide a law_table and num_law_entries.
- We should be able to use the same code on 86xx as well.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit bed8ce838a609aaab136d43b25e6df2a520bc854
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Dec 22 15:03:12 2007 +0100
- qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0764c164fed6277d359cf132d55187ea34290114
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Wed Jan 16 19:27:51 2008 +0200
- MIPS:Target support for qemu -M mips
- With serial, NE2000, IDE support. Tested in big-endian mode.
- Memory size hard-coded to 128M for now, so don't play with
- the -m option.
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Jan 11 00:01:37 2008 +0100
- Fix nfs command help to reflect that the serverip is optional
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Mon Dec 10 22:32:14 2007 +0100
- bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
- and move is_valid_ether_addr board file
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit c2f896b8fc4722e36915903e1942e138e68ce804
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Wed Jan 16 16:13:31 2008 +0900
- drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
- rx_status on the memory is basically in LE, but needs to be handled in CPU
- endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
- it'll work fine.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Cc: Masami Komiya <mkomiya@sonare.it>
- Cc: Lucas Jin <lucasjin@gmail.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 96a236746fe6a7b84802afb4ed31536696d34812
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Wed Jan 16 16:12:26 2008 +0900
- drivers/net/rtl8139.c: Fix cache coherency issues
- Current driver is meant for cache coherent systems. This patch adds
- flush_cache() routines to support cache non-coherent systems.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Cc: Masami Komiya <mkomiya@sonare.it>
- Cc: Lucas Jin <lucasjin@gmail.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit d1276c76c1e2b5035296689280ba1acb2c425104
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Wed Jan 16 16:11:14 2008 +0900
- drivers/net/rtl8139.c: Fix tx timeout
- "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
- does, the condition "(currticks() < to)" becomes invalid and immediately
- leads to tx timeout error. This patch introduces the fine-graded udely(10)
- loops to ease the impact of wrapping around.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Cc: Masami Komiya <mkomiya@sonare.it>
- Cc: Lucas Jin <lucasjin@gmail.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Jan 11 18:45:28 2008 +0800
- TSEC: Add the support for RealTek RTL8211B PHY
- Add the support of RealTek RTL8211B PHY, the RTL8211B
- PHY only supports RGMII and MII mode.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 84a3047b72b70e862b0b7a8e2058077457f89a32
- Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Date: Wed Jan 16 09:40:41 2008 +0100
- Remove annoying debug printout for PHY less boards.
- PHY less board prints out lots of "read wrong ...":
- read wrong value : mii_id 3,mii_reg 2, base e0102320
- read wrong value : mii_id 3,mii_reg 3, base e0102320
- UEC: PHY is Generic MII (ffffffff)
- read wrong value : mii_id 3,mii_reg 4, base e0102320
- read wrong value : mii_id 3,mii_reg 0, base e0102320
- read wrong value : mii_id 3,mii_reg 1, base e0102320
- read wrong value : mii_id 3,mii_reg 1, base e0102320
- read wrong value : mii_id 3,mii_reg 5, base e0102320
- read wrong value : mii_id 3,mii_reg 1, base e0102320
- read wrong value : mii_id 3,mii_reg 1, base e0102320
- read wrong value : mii_id 3,mii_reg 5, base e0102320
- FSL UEC0: Full Duplex
- FSL UEC0: Speed 100BT
- FSL UEC0: Link is up
- Using FSL UEC0 device
- Make this printout depend on UEC_VERBOSE_DEBUG and
- remove its definition in uec_phy.c
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 15 14:11:00 2008 -0600
- net: reduce boot latency on QE UEC based boards
- actually polling for PHY autonegotiation to finish enables us to remove the
- 5 second boot prompt latency present on QE based boards.
- call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
- uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
- code shamelessly stolen from tsec driver.
- also rm unused CONFIG_RMII_MODE code.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
- Author: michael.firth@bt.com <michael.firth@bt.com>
- Date: Wed Jan 16 11:40:51 2008 +0000
- TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
- The current TSEC driver limits MDIO access to the devices that have been configured as attached
- to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
- Signed-off-by: Michael Firth <michael.firth@bt.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jan 16 00:38:05 2008 -0600
- Add support for the MPC837xERDB
- MPC837xERDB board support includes:
- * DDR2 330MHz hardcoded (soldered on the board)
- * Local Bus NOR Flash
- * I2C, UART and RTC
- * eTSEC RGMII (TSEC0 - RTL8211B with MII;
- * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
- * load)
- Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
- Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jan 16 12:06:16 2008 -0600
- mpc83xx: add support for more system clock performance controls
- System registers that are modified are the Arbiter Configuration
- Register (ACR), the System Priority Control Register (SPCR), and the
- System Clock Configuration Register (SCCR).
- Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
- Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 16c3cde050e2d243e62b37486f1558570787beb8
- Author: James Yang <james.yang@freescale.com>
- Date: Wed Jan 16 11:58:08 2008 -0600
- FSL: Generalize PIXIS reset command parsing.
- Before, the order of arguments to the pixis_reset
- command needed to be supplied in a hard-coded order.
- Generalize the command parsing to allow any order.
- Signed-off-by: James Yang <james.yang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit ad8f8687b78c3e917b173f038926695383c55555
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jan 15 13:42:41 2008 -0600
- FSL: Convert board/freescale/common/Makefile to use CONFIG_
- Convert the board/freescale/common/Makefile to use
- CONFIG_* options to select which files to conditionally
- compile into the board/freescale/common library rather
- than conditionally compiling entire files.
- Now handles::
- CONFIG_FSL_PIXIS
- CONFIG_FSL_DIU_FB
- CONFIG_PQ_MDS_PIB
- CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7c2221eb230372a9e537c4f6636b147b0909325f
- Author: Roy Zang <tie-fei.zang@freescale.com>
- Date: Tue Jan 15 16:38:38 2008 +0800
- Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
- Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
- Remove unused ethernet CONFIG_ options.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 711a7946277d2e29af481011e8635e9975c54e45
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 15 14:05:14 2008 -0600
- mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
- continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 363eea9ff7f19a2cba17f262bd17559f166e134e
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 15 09:51:12 2008 -0600
- mpc83xx: clean up mpc8360emds.c warnings
- mpc8360emds.c: In function 'ft_board_setup':
- mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
- mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
- mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
- mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
- mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
- mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Jan 14 16:14:46 2008 -0600
- mpc83xx: fix phy-connection-type fixup code
- use tree passed to us in local blob, not global fdt.
- Also use fdt_path_offset to convert to relative offset, since absolute
- reference is needed to check for rgmii-id mode string value.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 2b4c952be7c4357a13e839d48df80853820c33eb
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Jan 14 09:01:40 2008 -0600
- mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e1d8ed2c08da14b168658cc5fa78529d461aea70
- Author: Poonam Aggrwal <b10812@freescale.com>
- Date: Mon Jan 14 09:41:14 2008 +0530
- Changes in uboot DDR configuration for MPC8313eRDB
- These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
- DDR configuration in u-boot code. Some are related to performance, some
- affect stability and some correct few basic errors in the current
- configuration.
- The changes have been tested and found to give better memory latency
- figures on MPC8313eRDB.LMBench figures prove it.
- The changes are:
- - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
- (this may improve performance for application with many read
- or write to open pages).
- - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
- 001 (activating all the CS when only one is used may cause
- unwanted noise on the system)
- - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
- Tras=45ns)
- - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
- - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
- comply with the 3 ODT clk requirements)
- - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
- - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
- - DDR_SDRAM_MODE[AL]changed from 0 to 1.
- - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
- - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
- - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
- The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
- The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
- Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
- Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
- Cc: Razzaz Mazyar <MRazzaz@freescale.com>
- Cc: Josep P J <PJ.Joseph@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Sat Jan 12 13:24:14 2008 -0500
- Enable the isdram command on the MPC8360EMDS board
- The isdram command prints out decoded information the "serial presence
- detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
- debugging memory configuration problems.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8bd522ce4afda3d4868ee8c913f5394094326be1
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Jan 11 18:48:24 2008 +0800
- mpc83xx: Add the support for MPC8315ERDB board
- The features list:
- - Boot from NOR Flash
- - DDR2 266MHz hardcoded configuration
- - Local bus NOR Flash R/W operation
- - I2C, UART, MII and RTC
- - eTSEC0/1 support
- - PCI host
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b05884efa614e4d8a9413158fc228e0dc02ab704
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Jan 11 18:46:50 2008 +0800
- mpc83xx: Add config of eTSEC emergency priority in SPCR
- The TSEC emergency priority definition of 831x/837x
- is different than the definition of 834x in SPCR register.
- Add the other config of TSEC emergency priority into
- cpu_init.c
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Jan 11 18:42:19 2008 +0800
- mpc83xx: Remove cache config from MPC8360ERDK.h
- The MPC8360ERDK board support patch is added before
- the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
- so, miss clean up it.
- The patch clean up the miss cache config.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit cd9d23053d435c08fc8695017b5cb9003fcda786
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Jan 14 23:09:32 2008 +0300
- nand: FSL UPM NAND driver
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 6cb2239ae76faee64434286c4f8fc71374702dd2
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Tue Jan 15 08:59:44 2008 +0900
- OneNAND: Separate U-Boot dependent code from OneNAND
- OneNAND: Separate U-Boot dependent code from OneNAND
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Jan 16 10:33:46 2008 +0100
- ppc4xx: Sequoia coding style cleanup and beautification
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
- Author: Larry Johnson <lrj@acm.org>
- Date: Tue Jan 15 14:35:58 2008 -0500
- ppc4xx: Refactor ECC POST for AMCC Denali core
- The ECC POST reported intermittent failures running after power-up on
- the Korat PPC440EPx board. Even when the test passed, the debugging
- output occasionally reported additional unexpected ECC errors.
- This refactoring has three main objectives: (1) minimize the code
- executed with ECC enabled during the tests, (2) add more checking of the
- results so any unexpected ECC errors would cause the test to fail, and
- (3) use synchronization (only) where required by the processor.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 2465665b73ac2f688af945b1ed510752afa816a4
- Author: David Saada <David.Saada@ecitele.com>
- Date: Tue Jan 15 10:40:24 2008 +0200
- QE UEC: Extend number of supported UECs to 4
- This patch extends the number of supported UECs to 4. Note that the
- problem of QE thread resources exhaustion is resolved by setting the
- correct number of QE threads according to Ethernet type (GBE or FE).
- Signed-off-by: David Saada <david.saada@ecitele.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 16 00:01:01 2008 +0100
- LWMON5: enable hush shell as command line parser
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Jan 15 17:22:28 2008 +0100
- ADS5121: disable watchdog; enable image timestamps
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Jan 15 17:21:28 2008 +0100
- TK885D: fixes for bigger flash sector sizes on new modules;
- adjust default environment;
- disable SCC ethernet (not used on this board).
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jan 15 17:48:13 2008 +0900
- pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jan 15 23:25:25 2008 +0900
- sh: Add support SH7710/SH7712
- SH7710/SH7712 of SH3 CPU are supported.
- SH771X is called SH-Ether, and has the Ether controller in CPU.
- The driver of Ether is not included in this patch.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 63a11be68306870e04d3851ed9fa41955cdf4894
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Tue Jan 15 23:06:17 2008 +0900
- sh: Add support of map_physmem() and unmap_physmem() to SuperH
- This patch add the support of map_physmem() and unmap_physmem()
- used with Common Flash Interface(CFI) driver.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Jan 9 14:42:27 2008 +0900
- sh: Add maintainer of MS7720SE to the MAINTAINER file
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Jan 9 14:39:58 2008 +0900
- sh: Fix board name in MS7720SE's config.mk
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit c0a04d93734d768b39dbb72fb501b65614c8615d
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Wed Jan 9 14:37:36 2008 +0900
- sh: Add MS7720SE to MAKEALL
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Mon Dec 3 22:58:50 2007 +0900
- sh: Add support for MS7720RP02 board
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Wed Jan 9 14:30:02 2008 +0900
- sh: Add support for SH7720 in serial_sh driver.
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
- Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- Date: Mon Dec 3 22:58:45 2007 +0900
- sh: Add support SH3 and SH7720
- Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jan 15 10:11:02 2008 +0100
- ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 17bef68097ab3692500a36fb31115bff7910aa99
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Mon Jan 14 14:04:42 2008 +0100
- ppc_4xx: Fix post spr.c for PPC405
- post/cpu/ppc4xx/spr.c contained a few checks for registers only present
- for PPC440 and derivates processor.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 06c428bcd4413014b43236e77765022071424fa6
- Author: Dave Liu <r63238@freescale.com>
- Date: Mon Jan 14 11:12:01 2008 +0800
- QE: fix compile warning
- qe.c: In function 'qe_upload_firmware':
- qe.c:390: warning: pointer targets in passing argument 2
- uec.c: In function 'uec_initialize':
- uec.c:1236: warning: 'uec_info' may be used uninitialized
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit a0dd99d51efa55fe023e19c97ead92683725eb11
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jan 14 10:05:05 2008 +0100
- ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
- Now that bit 29 is the USB PHY reset bit, update the Kilauea port
- to remove the USB PHY reset after powerup. The CPLD will keep the
- USB PHY in reset (active low) until the bit is set to 1 in
- board_early_init_f().
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 23:26:45 2008 +0100
- ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 23:37:50 2008 +0100
- ADS5121: Fix typo in ads5121.c, adjust default environment
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
- Author: John Rigby <jrigby@freescale.com>
- Date: Fri Aug 24 18:18:43 2007 -0600
- ADS5121: MAX slew rate for PATA pins
- Signed-off-by: John Rigby <jrigby@freescale.com>
- commit dd531aac34aaad138f16cacdb51d61908d59c0e2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 21:05:52 2008 +0100
- Fix Makefile dependency problem with parallel builds.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 19:51:39 2008 +0100
- MPC8544DS: fix board Makefile for silent build (with -s)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 16:44:08 2008 +0100
- PMC440 board: fix board Makefile for out-of-tree building
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 16:07:44 2008 +0100
- Makalu: fix compile warning
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Jan 13 12:36:12 2008 +0100
- cmd_nand : fix compiler warning.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
- Author: Michael Schwingen <rincewind@discworld.dascon.de>
- Date: Sat Jan 12 20:29:47 2008 +0100
- CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 02:19:44 2008 +0100
- MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 02:19:13 2008 +0100
- MPC8xx FEC driver: fix compiler warning.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 00:59:21 2008 +0100
- Fix Makefile dependencies issues; allow silent build
- - get rid of "version" target whichdidn't really work
- - make autoconf.mk depend on version_autogenerated.h to make sure
- to rebuild files as needed
- - add XECHO macro to allow for silent build using "make -s"
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 00:55:47 2008 +0100
- ADS5121e: fix compile warning
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f2b6f4610627fe3d607620e25082916a01538875
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Jan 13 00:55:18 2008 +0100
- MUNICes: fix board Makefile for remote build directory
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
- Author: Oliver Weber <almoeli@gmx.de>
- Date: Wed Jan 9 17:04:38 2008 +0100
- MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
- Signed-off-by: Oliver Weber <almoeli@gmx.de>
- commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
- Author: Andreas Engel <andreas.engel@ericsson.com>
- Date: Wed Jan 9 17:10:56 2008 +0100
- Make bootretry work when command line editing is enabled
- Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
- This patch fixes the problem.
- Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
- commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
- Author: Larry Johnson <lrj@acm.org>
- Date: Fri Jan 11 23:26:18 2008 -0500
- Refactor code for "i2c sdram" command
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 0df6b8446c4721b91ce311548114891130371083
- Author: Larry Johnson <lrj@acm.org>
- Date: Thu Jan 10 22:23:39 2008 -0500
- Fix "i2c sdram" command for DDR2 DIMMs
- Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
- "i2c sdram" command. This patch provides correct alternative
- interpretations when DDR2 memory is detected.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 64134f011254123618798ff77c42ba196b2ec485
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jan 12 20:31:39 2008 +0100
- Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
- With recent toolchain versions, some boards would not build because
- or errors like this one (here for ocotea board when building with
- ELDK 4.2 beta):
- ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
- For many boards, the .bss section is big enough that it wraps around
- at the end of the address space (0xFFFFFFFF), so the problem will not
- be visible unless you use a 64 bit tool chain for development. On
- some boards however, changes to the code size (due to different
- optimizations) we bail out with section overlaps like above.
- The fix is to add the NOLOAD attribute to the .bss and .sbss
- sections, telling the linker that .bss does not consume any space in
- the image.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3afac79ec27b91df185f090b31dad9620779f440
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Fri Jan 11 20:42:58 2008 -0600
- USB: Add Philips 1561 PCI-OHCI ids
- (needed for M5475EVB)
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 5e8def6731cd7bec74bff42a16b139de04010353
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jan 12 15:51:34 2008 +0100
- Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
- boards.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Fri Jan 11 12:03:43 2008 +0100
- MPC512X: Cleanup bus clock names.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Tue Jan 8 17:16:59 2008 +0100
- MPC512X: Fixed typo in macro name.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Tue Jan 8 17:16:15 2008 +0100
- ads5121: Added support for FDT.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jan 12 01:05:50 2008 +0100
- Coding Style cleanup; update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 15:15:17 2008 +0100
- Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 15:15:16 2008 +0100
- MUNICes: Set the right CFG_DEFAULT_MBAR value.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 15:15:15 2008 +0100
- added the config File for the MUNICes board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 15:15:14 2008 +0100
- added basic support for the MUNICes board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jan 12 00:39:37 2008 +0100
- Update CHANGELOG and MAINTAINERS files.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5ba7390c3cb579172be66888a371707b47b5be4e
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Jan 11 02:15:02 2008 +0100
- Fix compilation problem in common/cmd_bmp.c
- common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
- isn't defined. This patch fix this.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 01:12:09 2008 +0100
- Fix defaultconfig for the mgcoge board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit ac9db066b26935f31bff15c98168b19faeb603f3
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 01:12:08 2008 +0100
- Added support for the mgcoge board from keymile.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 01:12:07 2008 +0100
- Enable SMC microcode relocation patch for SMC1.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
- Author: Heiko Schocher <hs@denx.de>
- Date: Fri Jan 11 01:12:06 2008 +0100
- Added support for the mgsuvd board from keymile.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit bf05293973b348f6946c9df92cd3c65ece42d0be
- Author: James Yang <james.yang@freescale.com>
- Date: Thu Jan 10 16:02:07 2008 -0600
- Fix 64-bit vsprintf.
- There were some size and unsigned problems.
- Also add support for "ll" size modifier in format string like glibc
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 92fa37eac530860643afa26ae347af3d23d67309
- Author: Larry Johnson <lrj@acm.org>
- Date: Wed Jan 9 12:42:35 2008 -0500
- Remove superfluous preprocessor conditionals from LM73 driver
- (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
- (2) Use conditional Makefile.o.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit efc6f447c1b940d1650c4b854c5598a595ddc3da
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Jan 10 17:59:07 2008 +0100
- Add support for the TK885D baseboard from TELE-DATA
- The TK885D board uses a TQM885D module from TQ, this port adds an
- own configuration file and adds a last_stage_init() method to
- configure the two PHYs, depending on the phy_auto_nego environment
- variable.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Jan 10 02:22:05 2008 -0600
- Fix compiler warning
- main.c: In function 'readline_into_buffer':
- main.c:927: warning: unused variable 'p_buf'
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Jan 11 14:30:01 2008 +0100
- Add Fujitsu CoralP/Lime video driver
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Jan 11 02:39:47 2008 +0100
- Fix video console newline and carriage return handling
- Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
- are not displayed correctly. This is an attempt to fix
- this issue. Also add carriage return handling.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jan 11 15:53:58 2008 +0100
- ppc4xx: Fix sdram init on Sequoia boards
- Clear possible errors in MCSR resulting from data-eye-search.
- If not done, then we could get an interrupt later on when
- exceptions are enabled.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d610a60730b7464f6f659db49d264d89a7c71061
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Fri Jan 11 15:31:09 2008 +0100
- ppc4xx: Rework Lime support for lwmon5
- Rework Lime support for lwmon5 using new video driver
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Jan 11 14:55:16 2008 +0100
- ppc4xx: Update PMC440 config file
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Jan 11 14:55:08 2008 +0100
- ppx4xx: Fix sdram init on PMC440 boards
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 061aad4d320dddce26247699dcf2875ee2ea1366
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:09:33 2008 +0800
- mpc83xx: Fix the bug of 266MHz data rate DDR
- The DDR doesn't work on the 266MHz data rate,
- the patch fix the bug.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ded08317ad9e340b887bf2eb46e9565a0f610a93
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:08:26 2008 +0800
- mpc83xx: Make the code more readable
- Format the code, make it more readable
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:07:23 2008 +0800
- mpc83xx: Reduce the latency of DDR
- Reduce the AL from 2 to 1 clock to improve the performance.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:06:05 2008 +0800
- mpc83xx: Fix the wrong definition of MPC8315E
- According to the latest user manual of MPC8315E,
- 1) The SVCOD of HRCWL is different than 837x
- 2) The SCCR has changes
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ec2638ea08a537a1bd409db873aaaa33a053ebae
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:05:00 2008 +0800
- mpc83xx: Fix the typo in mpc83xx.h
- The SPCR about TSEC priority is wrong.
- Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
- Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:04:13 2008 +0800
- mpc83xx: Fix the typo in global data struct
- Fix the typo in global_data.h
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 2c5b48fc205c3e2752910da8f39209ed075929e5
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Jan 10 23:03:03 2008 +0800
- mpc83xx: Remove cache config from config.h
- clean up the cache config from configs.h of board
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit fab6f556bbbbd1bb35a5433161f7f173c18df559
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Wed Jan 9 20:57:47 2008 +0300
- mpc83xx: add support for the MPC8360E-RDK
- This is MPC8360E based board with:
- - 256MB fixed SDRAM;
- - 8MB Intel Strata NOR flash;
- - StMICRO 64MiB NAND flash;
- - two 10/100/1000 ethernet ports connected via Broadcom
- BCM5481 PHYs;
- - two 10/100 ethernet ports connected via National
- DP83848 PHYs;
- - one PCI and one miniPCI slots;
- - four serial ports (two NS16550-compatible, two UCCs);
- - four USB ports working through MPC8360E "FHCI" USB controller;
- - Fujitsu MB86277 graphics controller;
- - Analog to Digital Converter/Touchscreen controller, AD7843
- connected to SPI.
- Features not supported in this patch are:
- - StMICRO 64MiB NAND flash (patch sent);
- - MINT framebuffer initialization (patch is pending);
- - Fetching production information from the EEPROM via I2C;
- - FHCI USB;
- - Two slow UCCs used as RS-485 UARTs.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Wed Jan 9 20:57:40 2008 +0300
- mpc83xx: add "fsl, qe" compatible fixups
- New device trees will use "fsl,qe" compatible properties.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 977b57583a7c34010e566a09a679ec3c1836f996
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jan 9 15:24:06 2008 -0600
- mpc83xx: add missing CONFIG_HAS_ETH0 defines
- the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
- is defined; add the define to the missing board configs.
- Thanks to Emilian Medve for finding this.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b830b7f1635984ba607219fcbd78597c28eeb529
- Author: Becky Bruce <bgill@freescale.com>
- Date: Thu Jan 10 14:00:28 2008 -0600
- 86xx: Support 2GB DIMMs
- Configure the number of bits used to address the banks inside the SDRAM
- device. The default register value of 0 means 2 bits to address 4 banks.
- Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
- Signed-off-by: Becky Bruce <bgill@freescale.com>
- commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Thu Jan 10 18:50:33 2008 +0100
- ppc4xx: Make Sequoia boot vxWorks
- vxWorks expects in
- TLB 0 a entry for the Machine Check interrupt
- TLB 1 a entry for the RAM
- TLB 2 a entry for the EBC
- TLB 3 a entry for the boot flash
- After changing the baudrate to 9600 I had no problems to boot the
- vxWorks image as distributed by WindRiver (Revision 2.0/1 from
- June 18, 2007)
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Wed Jan 9 23:10:27 2008 -0500
- ppc4xx: Fix dflush() to restore DVLIM register
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 252f60b068d1f94190b5bcfda169db582387e15e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Jan 10 03:52:44 2008 -0500
- Nios2: remove common/cmd_bdinfo.c unused variable.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Scott McNutt <smcnutt@psyent.com>
- commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
- Author: Ben Warren <biggerbadderben@gmail.com>
- Date: Wed Jan 9 18:15:53 2008 -0500
- Fix Ethernet init() return codes
- Change return values of init() functions in all Ethernet drivers to conform
- to the following:
- >=0: Success
- <0: Failure
- All drivers going forward should return 0 on success. Current drivers that
- return 1 on success were left as-is to minimize changes.
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Acked-by: Stefan Roese <sr@denx.de>
- Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Acked-By: Timur Tabi <timur@freescale.com>
- commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jan 10 00:55:14 2008 +0100
- Coding Style cleanup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jan 9 16:56:54 2008 -0600
- Add QE brg freq and correct qe bus freq fdt update code
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 890dfef06c2d169a3356359596890754dfb8ee1c
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Jan 9 16:34:51 2008 -0600
- Remove cache config from ATUM8548 and sbc8548 configs
- These boards weren't updated by Kumar's config patch because they
- weren't in the tree, yet.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
- Author: Timur Tabi <timur@freescale.com>
- Date: Mon Jan 7 13:31:19 2008 -0600
- 85xx: add ability to upload QE firmware
- Define the layout of a binary blob that contains a QE firmware and instructions
- on how to upload it. Add function qe_upload_firmware() to parse the blob and
- perform the actual upload. Add command-line command "qe fw" to take a firmware
- blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
- 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
- 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Jan 8 01:22:21 2008 -0600
- 85xx: Remove cache config from configs.h
- Either use the standard defines in asm/cache.h or grab the information
- at runtime from the L1CFG SPR.
- Also, minor cleanup in cache.h to make the code a bit more readable.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
- Author: robert lazarski <robertlazarski@gmail.com>
- Date: Fri Dec 21 10:39:27 2007 -0500
- mpc85xx: Add support for ATUM8548 (updated)
- Add support for Instituto Atlantico's ATUM8548 board
- Signed-off-by: robert lazarski <robertlazarski@gmail.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
- Author: robert lazarski <robertlazarski@gmail.com>
- Date: Fri Dec 21 10:36:37 2007 -0500
- mpc85xx: Add support for ATUM8548 (updated)
- Add support for Instituto Atlantico's ATUM8548 board
- Signed-off-by: robert lazarski <robertlazarski@gmail.com>
- commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Thu Dec 13 06:45:14 2007 -0600
- mpc85xx: Add support for SBC8548 (updated)
- Add support for Wind River's SBC8548 reference board.
- Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Thu Dec 13 06:45:08 2007 -0600
- mpc85xx: Add support for SBC8548 (updated)
- Add support for Wind River's SBC8548 reference board.
- Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Signed-off by: Andy Fleming <afleming@freescale.com>
- commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Oct 22 19:58:19 2007 +0400
- MPC8568E-MDS: set up QE pario for UART1
- To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
- be set up appropriately.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit ad162249cb371e9e38971676f09be791e5f3cf4a
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Mon Oct 22 18:12:46 2007 +0400
- MPC8568E-MDS: reset UCCs to use them reliably
- In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
- UCCs.
- p.s Similar code exists in the Linux kernel board file (for capability
- reasons with older U-Boots), but should be removed some day.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit 2146cf56821c3364786ca94a7306008c5824b238
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Dec 19 01:18:15 2007 -0600
- Reworked FSL Book-E TLB macros to be more readable
- The old macros made it difficult to know what WIMGE and perm bits
- were set for a TLB entry. Actually use the bit masks for these items
- since they are only a single bit.
- Also moved the macros into mmu.h out of e500.h since they aren't specific
- to e500.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 1d47273d46925929f8f2c1913cd96d7257aade88
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Dec 18 23:21:51 2007 -0600
- Use FSL Book-E MMU macros from Linux Kernel
- Grab the FSL Book-E MAS register macros from Linux. Also added
- defines for page sizes up to 4TB and removed SHAREN since it doesnt
- really exist.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Jan 9 13:51:32 2008 -0600
- Fix my own merge stupidity
- Way back in August I merged Heiko's patch:
- 566a494f592: [PCS440EP] upgrade the PCS440EP board
- with Jon's CONFIG_COMMANDS patches.
- This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
- However, in the process, I left out some of Heiko's good changes.
- Now Heiko's and Jon's patches are properly merged in fat_register_device()
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
- Author: James Yang <James.Yang@freescale.com>
- Date: Wed Jan 9 11:17:49 2008 -0600
- Expose parse_line() globally.
- Add new function readline_into_buffer() that allows the
- output of readline to be put into a pointer to char buffer.
- This refactoring allows other functions besides the
- main command loop to also use the same input mechanism.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Wed Jan 9 01:15:25 2008 +0100
- trivial: fix consequences of a bad merge
- Fix what looks like a merge artifact.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Thu Jan 3 10:51:15 2008 +0800
- Add Ctrl combo key support to usb keyboard driver.
- Ctrl combo key support is added, which is very useful to input Ctrl-C
- for interrupt current job.
- Also add usb_event_poll() calling to usb_kbd_testc(), which can get
- key input when tstc() is called.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Sun Dec 30 03:30:56 2007 +0100
- fix various comments
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit 7817cb2083d982923752fe0f12b67c0e7c09a027
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Sun Dec 30 03:30:46 2007 +0100
- fix comments with new drivers organization
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit a9b410dc7d2a4721c408b13abfc037988150f145
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Fri Dec 28 12:50:59 2007 +0900
- Remove the obsolete terse version of do_mii()
- We now have more useful version of do_mii() and everybody use it.
- Gerald Van Baren says:
- > When I originally wrote the mii command 6(!) years ago, I wrote a
- > verbose version that printed human readable decomposition of the flags,
- > etc., and a terse one that didn't print as much stuff and thus had a
- > smaller memory footprint.
- >
- > It sounds like the terse version has withered and died, apparently
- > people are only using the verbose version (which is very understandable,
- > I do myself).
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 01c687aa6e065bd4faf80f723361e798941dd6b0
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Thu Dec 27 13:42:56 2007 -0500
- Do not reference sha1.c when building mkimage.
- remove sha1.o from mkimage linking since it isn't actually used.
- Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
- commit b9173af73e524d37c812f210173cf83385c5171a
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Thu Dec 27 15:39:54 2007 +0900
- common/cmd_mii.c: Add sanity argc check
- If type mii command without arguments, we suffer from uninitialized argv[]
- entries; for example we MIPS get stuck by TLB error.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 500856eb1707ed17d9204baa61dd59948d3b2899
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Wed Jan 9 19:39:36 2008 +0100
- API for external applications.
- This is an API for external (standalone) applications running on top of
- U-Boot, and is meant to be more extensible and robust than the existing
- jumptable mechanism. It is similar to UNIX syscall approach. See api/README
- for more details.
- Included is the demo application using this new framework (api_examples).
- Please note this is still an experimental feature, and is turned off by
- default.
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Jan 9 12:14:55 2008 -0600
- 86xx: Remove cache config from configs.h
- Just use the standard defines in asm/cache.h.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 26a41790f8eba19ad450e18ae91351daf485b3e2
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Wed Jan 9 18:05:27 2008 +0100
- Globalize envmatch()
- The newly introduced API (routines related to env vars) will need to call
- it.
- Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
- commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Jan 4 12:07:27 2008 -0600
- Convert MPC8610HPCD to use libfdt.
- Assumes the presence of the aliases node in the DTS to
- locate the pci and serial nodes for fixups.
- Use consistent fdtaddr and fdtfile in environment variables.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Jan 4 11:58:23 2008 -0600
- 8610: Fix lingering compile warnings.
- Turn off DEBUG.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 9 15:14:46 2008 +0100
- Coding Style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Dec 18 04:29:55 2007 -0500
- fix easylogo on big endian dev systems
- didnt realize how out of shape easylogo actually was until i tried using it.
- this patch does byte swapping as need be on the input tga header since the tga
- is in little endian but the host could just as well be big endian. i didnt
- bother using bswap macros or such stuff from system headers as nothing in
- POSIX dictates byte swapping functionality.
- Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
- commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Tue Dec 18 03:23:25 2007 -0500
- cleanup easylogo
- - make the Makefile not suck
- - include proper headers for prototypes
- - fix obvious broken handling of strchr() when handling '.' in filenames
- Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
- commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
- Author: raptorbrino@aim.com <raptorbrino@aim.com>
- Date: Thu Dec 13 21:23:28 2007 -0500
- Fix build problems under Cygwin
- This patch allows u-boot to build without error in a cygwin
- environment. Cygwin does not define __u64 in it's
- include/asm/types.h file. The -idirafter flag in the u-boot
- build causes the inclusion of the cygwin types.h file as opposed
- to u-bot/include/asm/types.h file which does define __u64.
- Subsequently, sha1.c compile fails due to unknown symbol.
- Signed-off-by: Brian Miller <raptorbrino@netscape.net>
- commit 43ef1c381f9195504a2488f5cb909227eb97d475
- Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- Date: Fri Nov 30 17:29:59 2007 +0100
- cmd_bmp: Add support for displaying gzip compressed bmps
- The existing code can show information about a gzip compressed BMP
- image, but can't actually display it.
- Therefore, move the decompression code out of bmp_info() and use it in
- bmp_display() as well in order to display a compressed BMP image.
- Also, clean things up a bit and fix a memory leak while we're at it.
- [hskinnemoen@atmel.com: a bit of refactoring]
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit d197ffd8172c6fdef38733424640a9a47295d6e9
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Thu Nov 29 21:15:56 2007 +0100
- Fix and optimize MII operations on FEC (MPC8xx) controllers
- This patch fixes several issues at least on a MPC885 based system with two
- FEC interfaces used in MII mode.
- 1. PHY discovery should first read PHY_PHYIDR2 register and only then
- PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
- otherwise the values read are wrong. Also notice, that PHY discovery
- cannot work on MPC88x / MPC87x in setups with both FECs active at all
- in its present form, because for both interfaces the registers from FEC
- 1 are used to communicate over MII.
- 2. Remove code duplication for resetting the FEC by isolating it into a
- separate function.
- 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
- 4. Optimize mii_init() to only reset the FEC 1 controller once.
- 5. Fix a typo in mii_init() using index i instead of j thus potentially
- leading to unpredictable results.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Nov 20 13:14:20 2007 +0100
- Fix endianness conversions in rtl8169 driver
- It is unclear on what platforms this driver has been tested, since
- noone up to now defines CONFIG_RTL8169 in the board configuration
- header. Now it has been fixed for a big-endian mpc8241 based
- linkstation platform. This patch presents the necessary endianness
- conversion fixes.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Thu Jan 3 10:51:15 2008 +0800
- Add Ctrl combo key support to usb keyboard driver.
- Ctrl combo key support is added, which is very useful to input Ctrl-C
- for interrupt current job.
- Also add usb_event_poll() calling to usb_kbd_testc(), which can get
- key input when tstc() is called.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 9 13:43:38 2008 +0100
- Coding Style clenaup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 17:13:11 2007 +0100
- Remove bit swapping in Xilinx Spartan bitfile loading
- This patch removes the unnecessary bit swapping when
- booting .bit files with the 'fpga loadb' command.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 437fc7327f0611f82937858f2d80e4cd61b40984
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 17:13:05 2007 +0100
- Fix MSB check in Xilinx Spartan slave serial mode
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 3bff4ffa33729a42645e328a21e8d16488872958
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 17:12:56 2007 +0100
- Add new Xilinx Spartan FPGA types
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 17:12:43 2007 +0100
- Add pre and post configuration callbacks for Spartan FPGAs
- This patch adds a post configuration callback for Spartan2/3 FPGAs.
- pre and post configuration callback are now optional and
- not called when the function pointer is set to NULL.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 17:12:34 2007 +0100
- Improve configuration of FPGA subsystem
- This patch removes the FPGA subsystem configuration through
- the CONFIG_FPGA bitmask configuration option.
- See README for the new options:
- CONFIG_FPGA,
- CONFIG_FPGA_<vendor>,
- CONFIG_FPGA_<family>
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 95c6bc7d4a3588b452baca610f8c795a83630477
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 16:55:17 2007 +0100
- Add Epson RX8025 RTC support
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 16:57:23 2007 +0100
- serial: Make default_serial_console() a weak function
- With this patch it is possible to reimplement default_serial_console()
- in board specific code. This will be done in the upcomming PMC440
- U-Boot port. This also allows the lwmon board maintainer to
- remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 14:14:47 2007 +0100
- add 'terminal program' functionality
- This patch adds a 'cu' like serial terminal command to u-boot
- using which you can access other serial ports from the system console.
- OpenMoko uses this in their Neo1973 phones to get access to the GSM
- Modem and GPS chip from the bootloader.
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 14:12:53 2007 +0100
- Re-introduce the 'nand read.oob' and 'nand write.oob' commands
- that used to exist with the legacy NAND code
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit f540c42d9564854b19ce9bbb70affe172529fe70
- Author: Harald Welte <laforge@openmoko.org>
- Date: Wed Dec 19 14:09:58 2007 +0100
- Fix building with CRAMFS but not JFFS2 support
- Signed-off-by: Harald Welte <laforge@openmoko.org>
- commit 23d0baf967fecdaf1804f045f6339337c5607eec
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Dec 22 15:52:58 2007 +0100
- Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 23776ff292966a85d811126933830bed48211826
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Dec 11 10:53:12 2007 +0100
- ARM: support board-specific ethernet PHY init
- Add until the new phylib will be arrived
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Dec 8 16:34:08 2007 +0100
- IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Dec 9 11:01:10 2007 +0100
- Add missing file in gitignore and comments
- based on Linux source tree's .gitignore files
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 9 11:36:21 2008 +0100
- Coding Style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b2e2142c500c48a57f18f9dd30e66c13caea0971
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 9 10:38:58 2008 +0100
- POST: Execute SPR test after relocation
- On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
- self modifying code and this doesn't work with stack in d-cache, since
- I can't move the code from d-cache to i-cache. We move the SPR test to
- be executed a little later, after relocation. Then stack is located in
- SDRAM and this self-modifying code is no problem anymore.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 9 10:28:20 2008 +0100
- ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
- This patch configures the LWMON5 port to use d-cache as init-ram and
- the unused GPT0_COMP6 as POST WORD storage.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1754f50b710194f886b6f2831803d8960171a14d
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 9 10:25:46 2008 +0100
- ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
- The privious 4xx POST implementation only supported storing the POST
- WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
- we need to store the POST WORD in some other non volatile location.
- This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
- a location.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 9 10:23:16 2008 +0100
- ppc4xx: Add 44x cache locking to better support init-ram in d-cache
- This patch adds support for locking the init-ram/stack in d-cache,
- so that other regions may use d-cache as well
- Note, that this current implementation locks exactly 4k of d-cache,
- so please make sure that you don't define a bigger init-ram area. Take
- a look at the lwmon5 440EPx implementation as a reference.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0ddb89601a8d29e808db450366752ffdc6267c53
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 9 10:16:33 2008 +0100
- Fix memset bug in ext2fs_read_file()
- ext2fs_read_file() had the function arguments swapped.
- Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Tue Jan 5 08:17:15 1988 +0100
- Fix problems with usb storage devices on MPC5200 /TQM5200
- The MPC5200 OHCI controller operates in big endian, so
- CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Jan 8 22:58:27 2008 +0100
- Fix compile problem with new env code.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 64b3727b9779d86127cd576e392a987de5ebb9fd
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Tue Nov 27 10:23:20 2007 +0100
- tools: fix fw_printenv tool to compile again
- This patch updates the fw_printenv/fw_setenv userspace tool to include
- the correct MTD header in order to compile against current kernel
- headers. Backward compatibility is preserved by introducing an option
- MTD_VERSION which can be set to "old" for compilation using the old MTD
- headers. Along with this a number of warnings are fixed.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Jan 8 15:40:09 2008 +0100
- ppc4xx: assign PCI interrupts on seuqoia boards
- Some operating systems rely on assigned PCI interrupts.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Jan 8 15:50:49 2008 +0100
- ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
- This patch allows the use of 4xx interrupt vector number defines
- in board specific code outside cpu/ppc4xx.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Jan 8 15:39:01 2008 +0100
- ppc4xx: Fix UIC2 vector number base
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Jan 8 12:49:58 2008 +0100
- ppc4xx: Update PLB/PCI divider for PMC440 board
- This patch updates the PLB/PCI divider when running at
- 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Jan 8 11:13:09 2008 +0100
- ppc4xx: Disable error message when no NAND chip is installed on PMC440
- Add CFG_NAND_QUIET_TEST option to disable error message when
- no NAND chip is installed on PMC440 boards.
- Disable a couple of config defines that are only used for NAND_U_BOOT.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Jan 8 22:58:27 2008 +0100
- Fix compile problem with new env code.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6de66b35426312a21174a9bf0576a094e2904bea
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Tue Nov 27 10:23:20 2007 +0100
- tools: fix fw_printenv tool to compile again
- This patch updates the fw_printenv/fw_setenv userspace tool to include
- the correct MTD header in order to compile against current kernel
- headers. Backward compatibility is preserved by introducing an option
- MTD_VERSION which can be set to "old" for compilation using the old MTD
- headers. Along with this a number of warnings are fixed.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit ad3006fe7e84667021753b74247b0bafd97ba35f
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Mon Jan 7 23:47:32 2008 -0500
- LIBFDT: use memmove() instead of memcpy()
- This is partial patch from the DTC/libfdt
- commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Wed Nov 21 11:56:14 2007 +1100
- The patch also fixes one genuine bug caught by valgrind -
- _packblocks() in fdt_rw.c was using memcpy() where it should have been
- using memmove().
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit aec7135bc300e3340d18f203347ee00c5b5f68c0
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Mon Dec 17 14:42:07 2007 +1100
- libfdt: Add more documentation (patch the seventh)
- This patch adds more documenting comments to libfdt.h. Specifically,
- these document the read/write functions (not including fdt_open_into()
- and fdt_pack(), for now).
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
- Author: David Gibson <david@gibson.dropbear.id.au>
- Date: Mon Dec 17 14:41:52 2007 +1100
- libfdt: Add more documentation (patch the sixth)
- This patch adds some more documenting comments to libfdt.h.
- Specifically this documents all the write-in-place functions.
- Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Dec 29 22:45:27 2007 -0500
- Fine grained per property /chosen updating.
- Implement a suggestion by Scott Wood to make the /chosen handling fine
- grained. Don't overwrite pre-existing properties on a per-property basis,
- so if /chosen exists but a necessary /chosen/property doesn't, it gets
- created. If a /chosen property exists, it is NOT overwritten unless the
- "force" flag is true.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Jan 5 15:33:29 2008 -0500
- Improve the FDT help message.
- Add a note that "fdt copy" makes the new address active.
- Remove most of the extra hints at the end of the fdt help.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Jan 5 14:52:04 2008 -0500
- Support setting FDT properties with optional values.
- Fix a bug found and documented by Bartlomiej Sieka where the optional
- value on "fdt set <path> <prop> [<val>]" wasn't optional.
- => fdt mknode / testnode
- => fdt print /testnode
- testnode {
- };
- => fdt set /testnode testprop
- => fdt print /testnode
- testnode {
- testprop;
- };
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 22fb2246df91bfc840d87f0c5910818bad55577a
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 11:56:30 2007 +0100
- Add fdt_find_and_setprop() to fdt_support.h
- fdt_find_and_setprop() is used by several 4xx boards and it's
- missing in the appropriate header. This patch eliminates a
- warning when building U-Boot for such boards.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 802b769bac17b0560d3535a42c502469ee190cd1
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jan 8 18:39:30 2008 +0100
- ppc4xx: Return 0 on success in 4xx ethernet driver
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6775c68683a53c7abc778774641aac6f833a2cbf
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 8 09:59:49 2008 -0600
- mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Dec 20 16:28:34 2007 -0600
- mpc83xx: rm remaining FLAT_TREE code
- ..in board pci.c files
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit b3458d2cd55d01732e30a76d898afd99e871cd67
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Dec 20 15:57:28 2007 -0600
- mpc83xx: remove FLAT_TREE code
- need to rm it from pci code, too!
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5b8bc606c61456566af6912f818a153b6b06f242
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Dec 20 14:09:22 2007 -0600
- mpc83xx: convert to using do_fixup_*()
- convert to using simpler mpc85xx style fdt update code; streamline by
- eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
- the old school FLAT_TREE code from 83xx (since the sbc8349 was just
- converted over to using libfdt).
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Thu Dec 20 12:58:51 2007 -0500
- sbc8349: enable libfdt by default on WRS SBC8349 board.
- Make libfdt the default for the WRS SBC8349 board.
- Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
- done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Thu Dec 20 12:58:16 2007 -0500
- sbc8349: migrate board to libfdt
- This adds libfdt support code for the Wind River sbc8349 board.
- Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
- the other Freescale 83xx boards.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Thu Dec 20 12:56:19 2007 -0500
- sbc8349: Remove board specific ECC code
- ECC code is now shared for all 83xx boards, so remove board specific one.
- See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Dec 20 01:30:48 2007 -0600
- mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
- continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ccf21c311e68d48399eff1e72936052885f6e3f7
- Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Date: Thu Dec 6 16:43:40 2007 +0100
- Add support CONFIG_UEC_ETH3 in MPC83xx
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- commit e6af9932d31171e35db880e7b2f29f903b1b7660
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Nov 26 11:00:54 2007 -0600
- Remove CONFIG options related to OF that we dont use
- The MPC8360E MDS config defined:
- CONFIG_OF_HAS_BD_T
- CONFIG_OF_HAS_UBOOT_ENV
- Which we don't use or ever needed. This seems like copy-paste feature creep.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f602082b4b7ed4ee16432067cc67a0a24fedc715
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Dec 10 14:16:22 2007 -0600
- mpc83xx: supress compiler warning
- mpc8360emds.c: In function ‘ft_board_setup’:
- mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
- mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Nov 27 14:17:29 2007 -0600
- mpc83xx: fix remaining fdt_find_node_by_path references
- rename to fdt_path_offset
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 921d4b19ad1be704df58725485d9292dc0414adf
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Nov 19 12:30:09 2007 -0600
- mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
- Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
- This change guarantees that the environment will be located on the
- first flash sector after the U-Boot image.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Nov 9 14:28:08 2007 -0600
- mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
- u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
- properties in the device tree so the PHY gets configured for internal delay on
- RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Sep 18 12:41:15 2007 +0800
- mpc83xx: update the CREDITS and MAINTAINERS
- update the CREDITS and MAINTAINERS.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit b21add4b42af7b767448251b599b91066a160e0d
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Sep 18 12:40:21 2007 +0800
- mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
- Add the MAINTAINER and MAKEALL entries for mpc837xemds
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit f8900ce9094c462355eb792eea264ff16ac8fd16
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Sep 18 12:38:53 2007 +0800
- mpc83xx: Add the MPC837xEMDS board readme
- Add the README.mpc837xemds to /doc
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Sep 18 12:37:57 2007 +0800
- mpc83xx: Add the support of MPC837xEMDS board
- The MPC837xEMDS board support:
- * DDR2 400MHz hardcoded and SPD init
- * Local bus NOR Flash
- * I2C, UART, MII and RTC
- * eTSEC RGMII
- * PCI host
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 555da61702771fe0f76f3de23b4e7590f3704161
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Sep 18 12:36:58 2007 +0800
- mpc83xx: Add the support of MPC8315E SoC
- The MPC8315E SoC including e300c3 core and new IP blocks,
- such as TDM, PCI Express and SATA controller.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 03051c3d35c9981ceaa059005660e699f3eacf1c
- Author: Dave Liu <r63238@freescale.com>
- Date: Tue Sep 18 12:36:11 2007 +0800
- mpc83xx: Add the support of MPC837x SoC
- The MPC837x SoC including e300c4 core and new IP blocks,
- such as SDHC, PCI Express and SATA controller.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
- Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- Date: Wed Nov 14 18:54:53 2007 +0300
- MPC8360E-MDS: configure and enable second UART
- Despite user manual, BCSR9.7 is negated (high) on HRST, so
- UART2 is disabled. Fix that and configure QE pins properly.
- Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- commit b2893e1fcb28fad8c8b317104df8cee0142c7631
- Author: Timur Tabi <timur@freescale.com>
- Date: Mon Nov 5 09:34:06 2007 -0600
- 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
- Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
- currently-defined 83xx boards. This change guarantees that the environment
- will be located on the first flash sector after the U-Boot image.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e05329516a13616b53240cd85b739217c2bf87f1
- Author: Larry Johnson <lrj@acm.org>
- Date: Fri Jan 4 13:27:02 2008 -0500
- ppc4xx: Remove weak binding from common Denali data-eye search code
- Now that there are no board-specific versions of
- "denali_core_search_data_eye()", the weak binding on the common version
- can be removed.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 5ba576c01602fd328800a427964c36a0a05c5dce
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 5 09:13:46 2008 +0100
- ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 5 09:12:41 2008 +0100
- ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
- On Katmai the complete auto-calibration somehow doesn't seem to
- produce the best results, meaning optimal values for RQFD/RFFD.
- This was discovered by GDA using a high bandwidth scope,
- analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
- so now on Katmai "only" RFFD is auto-calibrated.
- This patch also adds RDCC calibration as mentioned on page 7 of
- the AMCC PowerPC440SP/SPe DDR2 application note:
- "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 49db47b8ae6afff2b898be312948ff501357dc80
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Jan 2 16:48:42 2008 +0100
- ppc4xx: Remove sdram.h from PMC440 board
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Jan 2 16:48:34 2008 +0100
- ppc4xx: use common denali core defines and data eye search code for PMC440
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Jan 2 12:05:14 2008 +0100
- ppc4xx: More cleanup for esd's LCD code
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jan 4 12:00:01 2008 +0100
- ppc4xx: Fix Sequoia NAND booting target
- The Sequoia NAND booting target now uses the recently extracted
- cpu/ppc4xx/denali_data_eye.c file too.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
- Author: Lawrence R. Johnson <lrj@acm.org>
- Date: Thu Jan 3 15:02:02 2008 -0500
- ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
- Author: Lawrence R. Johnson <lrj@acm.org>
- Date: Fri Jan 4 02:11:56 2008 -0500
- ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
- Note: this patch changes the configuration of some GPIO registers:
- Register Old Value New Value
- --------------- ---------- ----------
- DCR GPIO0_TCR 0x0000000F 0x0000F0CF
- DCR GPIO0_TSRH 0x55005000 0x00000000
- DCR GPIO1_TCR 0xC2000000 0xE2000000
- DCR GPIO1_TSRL 0x0C000000 0x00200000
- DCR GPIO1_ISR2L 0x00050000 0x00110000
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 5ab884b254ca2e707ab50545cd705f30108cf491
- Author: Lawrence R. Johnson <lrj@acm.org>
- Date: Thu Jan 3 18:54:00 2008 -0500
- ppc4xx: Add functionality to GPIO support
- This patch makes two additions to GPIO support:
- First, it adds function gpio_read_in_bit() to read the a bit from the
- GPIO Input Register (GPIOx_IR) in the same way that function
- gpio_read_out_bit() reads a bit from the GPIO Output Register
- (GPIOx_OR).
- Second, it modifies function gpio_set_chip_configuration() to provide
- an additional option for configuring the GPIO from the
- "CFG_4xx_GPIO_TABLE".
- According to the 440EPx User's Manual, when an alternate output is used,
- the three-state control is configured in one of two ways, depending on
- the particular output. The first option is to select the corresponding
- alternate three-state control in the GPIOx_TRSH/L registers. The second
- option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
- the GPIOx_TRSH/L registers, and set the corresponding bit in the
- GPIOx_TCR register to enable the output. For example, the Manual
- specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
- the alternate three-state control (first option), and specifies
- configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
- enabled in the GPIOx_TCR register (second option).
- Currently, gpio_set_chip_configuration() configures all alternate signal
- outputs to use the first option. This patch allow the second option to
- be selected by setting the "out_val" element in the table entry to
- "GPIO_OUT_1". The first option is used when the "out_val" element is
- set to "GPIO_OUT_0". Because "out_val" is not currently used when an
- alternate signal is selected, and because all current GPIO tables set
- "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
- not change any existing configurations.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 196404cdc1de495d6182e84731c200fc5748df15
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sun Dec 30 01:01:54 2007 -0500
- PPC4xx: Remove sdram.h from board/lwmon5
- These definitions are now in "include/ppc440.h".
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sun Dec 30 01:01:32 2007 -0500
- PPC4xx: Use common code for LWMON5 board SDRAM support
- This patch also modifies the functionality of the code so that the data-eye
- search is now done with with the cache disabled.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 62cc3951ab72135d9c101f1845b794e63a0fa189
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sun Dec 30 01:01:14 2007 -0500
- PPC4xx: Remove sdram.h from board/amcc/sequoia
- These definitions are now in "include/ppc440.h".
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sun Dec 30 01:00:50 2007 -0500
- PPC4xx: Use common code for Sequoia board SDRAM support
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 8b0c5c127690335758100c25eaec2b84db97c101
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 16:58:41 2007 +0100
- net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
- When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
- networking stack does not automatically switch to
- another interface. This patch does not touch the default
- behavior.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
- Author: Upakul Barkakaty <upakul@gmail.com>
- Date: Thu Nov 29 12:16:13 2007 +0530
- NET: Proper return code handling in eth_init() function in file eth.c
- This patch modifies the return code handling in the eth_init()
- function, to be compatible with the handling of the return codes in
- the other network stack files. It now returns a 0 on Success and -1 on
- error.
- Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 5ca2d0953e4579a80810966cca2077e20d912c97
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Mon Nov 19 20:27:04 2007 +0900
- net/eth.c: Fix env_enetaddr signed overflow
- Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
- warned as below:
- U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
- DRAM: 256 MB
- Flash: 32 MB
- In: serial
- Out: serial
- Err: serial
- Net: NEC-Candy
- Warning: NEC-Candy MAC addresses don't match:
- Address in SROM is 00:00:4C:80:92:A2
- Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
- This patch changes env_enetaddr type from `char' to `unsigned char'.
- Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit f85b60710571b37293d2233933b76e2aa3db5635
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Thu Dec 27 18:19:02 2007 +0100
- Introduce new eth_receive routine
- The purpose of this routine is receiving a single network frame, outside of
- U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
- U-Boot will let them utilise networking facilities. For sending a raw frame
- the already existing eth_send() can be used.
- The direct consumer of this routine is the newly introduced API layer for
- external applications (enabled with CONFIG_API).
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- commit 5c740711f0ea5b51414b341b71597c4a0751be74
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Jan 3 10:41:04 2008 -0600
- 8610: Move include of config.h earlier.
- Include config.h earlier in the set of #includes
- so as to avoid a incidental and duplicate definition
- of CFG_CACHELINE_SIZE.
- Signed-off-by: Jon Loeliger
- commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Dec 4 10:53:34 2007 -0600
- Don't slam #undef DEBUG in the 8641HPCN config file.
- Doing so prevents it from being individually set
- and useful in other files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Nov 28 14:47:18 2007 -0600
- Convert MPC8641HPCN to use libfdt.
- Assumes the presence of the aliases node in the DTS to
- locate the ethernet, pci and serial nodes for fixups.
- Use consistent fdtaddr and fdtfile in environment variables.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ce37422d0002e10490e268392e0c4e3028e52cec
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 2 14:06:26 2008 +0100
- cfi_flash: Fix bug in flash_isset() to use correct 32bit function
- This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
- flash chips connected to a 32bit wide port.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 2 15:58:44 2008 +0100
- Fix compile problem introduced by "cleanup" commit 3dfd708c
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 2 15:54:45 2008 +0100
- Make scripts and Makefiles POSIX compliant
- The bash builtin versions of the "test" (resp. "[") command allow
- using "==" for string comparisons, but POSIX compatible implemen-
- tations (like /usr/bin/test) insist on using "=" only. On such systems
- you will see:
- $ /usr/bin/test a == a && echo OK
- /usr/bin/test: ==: binary operator expected
- This patch fixes Makefiles and scripts to use POSIX style.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 2 14:05:37 2008 +0100
- cfi_flash: Fix bug in flash_isset() to use correct 32bit function
- This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
- flash chips connected to a 32bit wide port.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jan 2 12:38:43 2008 +0100
- Minor coding style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e174ac34adf5d5653df12bc3cf19c52063a71269
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 28 17:29:56 2007 +0100
- ppc4xx: Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 17:07:24 2007 +0100
- ppc4xx: Complete PMC440 board support
- This patch brings the PMC440 board configuration file.
- Finally it enables the PMC440 board support.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 407843a582560fc5231299561ab3c2b6b6cd3397
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 17:07:18 2007 +0100
- ppc4xx: Add FPGA support and BSP commands for PMC440 boards
- This patch adds some BSP commands and FPGA booting support
- for esd's PMC440 boards.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 17:07:14 2007 +0100
- ppc4xx: Add initial esd PMC440 board files
- This patch adds the first files for the new esd PMC440 boards.
- The next two patches will complete the PMC440 board support.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 17:10:36 2007 +0100
- ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
- - add EEPROM write protection for esd PLU405 boards.
- - initialize NAND GPIOs
- - use correct io accessors
- - cleanup
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 77660c4b59055d621d2a8595bd4c18bb277268fc
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 17:10:44 2007 +0100
- ppc4xx: use correct io accessors for esd's LCD code
- This patch fixes esd's LCD dectection code to work correctly with
- newer gcc versions.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 28 17:10:42 2007 +0100
- ppc4xx: Maintenance patch for VOH405 boards
- - add EEPROM write protection
- - initialize NAND GPIOs
- - use correct io accessors
- - slow down I2C clock to 100kHz
- - enable ext. I2C bus
- - cleanup
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit c05569066dbcba3fdf36d4d1943df265dc316a86
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 28 16:08:08 2007 +0100
- ppc4xx: Enable 405EP PCI arbiter per default on all boards
- In an attmemt to clean up the 4xx start.S file, I removed the enabling
- of the internal 405EP PCI arbiter. This is needed for multiple other
- 405EP platforms, like most of the esd 405EP. Now the internal PCI
- arbiter is enabled again per default as it has been before.
- Signed-off-by: Stefan Roese <sr@denx.de>
- Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 28 15:53:46 2007 +0100
- ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
- Signed-off-by: Stefan Roese <sr@denx.de>
- Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 28 06:06:04 2007 +0100
- ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
- Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
- platforms mentioned above.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b568fd25574181a3b12ae3d66b2913903442cb83
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Dec 27 17:03:46 2007 +0100
- Remove CPCI440 board
- This board never left prototyping state and it
- became a millstone round my neck. So remove it.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit c591dffe0cbacd896ccbad06011fe6d6afa080da
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Thu Dec 27 11:28:51 2007 -0500
- Add support for Korat PPC440EPx board
- These patches add support for the PPC440EPx-based "Korat" board to
- U-Boot. They are based primarily on support for the Sequoia board.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:16:25 2007 -0500
- Add configuration file for Korat board
- This patch supplies the configuration file for the Korat PPC440EPx-
- processor board.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:16:11 2007 -0500
- Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit aba19604d848b2838cfb9ebe818909e6a216058e
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Thu Dec 27 10:54:48 2007 -0500
- Add 440EPx DDR2 SPD DIMM support
- This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
- controller. It should also work on the 440GRx. It is based on the DDR2
- SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
- This code has been tested on prototype Korat boards with three Kingston
- DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
- (two ranks). The Korat board has a single DIMM socket, but support has
- been provided (though not tested) for boards with two DIMM sockets.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:15:30 2007 -0500
- Copy 440EPx/GRx SDRAM data-eye search to common directory
- This patch creates a non-board-specific file for performing the SDRAM
- data-eye search. It also adds ECC error checking to the test of valid
- data on readback when ECC is enabled.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit c46f53333b22b1f9098676bea8884fc7db820cf3
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:15:13 2007 -0500
- Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
- This patch adds the Denali SDRAM controller definitions to "ppc440.h".
- It also fixes two typos in the definitions, so the board-specific
- "sdram.h" files containing these definitions are also fixed to avoid
- compiler warnings.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit c348578bf612d0c56d8d376d23cae16defbd86af
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Thu Dec 27 10:50:55 2007 -0500
- Add Ethernet 1000BASE-X support for PPC4xx
- This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
- is defined, the PHY will advertise it's capabilities for autonegotiation
- based on the capabilities shown in the PHY's status registers, including
- 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
- advertise hard-coded capabilities, as before.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Thu Dec 27 09:52:17 2007 -0500
- Add driver for National Semiconductor LM73 temperature sensor
- This driver is based on the driver for the LM75.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 12618278688ea9b3d76536960a5ad2e3790fac40
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:14:00 2007 -0500
- Add driver for STMicroelectronics M41T60 RTC
- This driver is based on the driver for the M41T11. In the intended
- application, the RTC will be powered by a large capacitor, rather than a
- battery. The driver therefore checks to see whether the RTC has lost
- power. The chip's OUT bit is normally reset from its power-up state. If
- the OUT bit is read as set, or if the date and time are not valid, then the
- RTC is assumed to have lost power, and its date and time are reset to
- 1900-01-01 00:00:00.
- Support for adjusting the speed of the clock to improve accuracy is
- provided through an environment variable.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit d3471173e14b7544bb60339eda8d3d3906694b0a
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:34:39 2007 -0500
- Use out_be32() and friends to access memory-mapped registers in sequoia.c
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit c68f59fe3ec16769f82b5fca7421983c336d3aac
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:34:20 2007 -0500
- Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Dec 22 15:23:50 2007 -0500
- Cosmetic changes to ECC POST for AMCC Denali core
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 2e583d6c81034f80a267b89fa55498ae063ccef1
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Dec 26 20:20:19 2007 +0100
- ppc4xx: Fix compilation problem in 405 cache POST test
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Dec 22 12:20:09 2007 +0100
- ppc4xx: Move virtual address of POST cache test to bigger address
- On Sequoia & LWMON5 the virtual address of the POST cache test is now
- moved to a bigger address. This enables usage of more memory on those
- boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d91722102cf63f77a0148ed3f3d54a26d87575e9
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Dec 22 12:18:26 2007 +0100
- ppc4xx: Fix problem in 44x cache POST routine
- As repoted by Larry Johnson, running "diag run cache" caused a crash
- in U-Boot. This problem was introduced by a patch that removed the
- TLB entry for the cache test after the test has completed. Since this
- TLB was only setup once, a 2nd attempt to run this cache test
- failed with a crash. Now this TLB entry is created every time the
- routine is called.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b0265b576bb8fa9465f99e99c323768b562fadc2
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 21 07:51:29 2007 +0100
- ppc4xx: Update Makalu fdt support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Dec 19 09:05:40 2007 +0100
- ppc4xx: Add fdt support to AMCC Katmai eval board
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 328a340392a5df9aaf00792be989df73e750859e
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Dec 18 08:44:51 2007 +0100
- ppc4xx: fdt: Cleanup setup of cpu node setup
- Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
- without using the absolute path to the cpu node. This makes it possible
- to use this U-Boot version with both versions of cpu-node naming
- "cpu@0" and the former "PowerPC,440EPx@0".
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Dec 17 17:26:21 2007 +0100
- ppc4xx: Fix lwmon5 compilation problem
- Now that the 440EPx ECC test is not board specific anymore
- remove this Makefile.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
- Author: Anatolij Gustschin <agustschin@t-online.de>
- Date: Wed Dec 5 17:43:20 2007 +0100
- Fix ppc4xx clear_bss() code
- ppc4xx clear_bss() fails if BSS segment size is not
- divisible by 4 without remainder. This patch provides
- fix for this problem.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Nov 30 18:35:11 2007 +0100
- PPC4xx: Minimal changes to add vxWorks support
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 052440b022ca8981d39b6f8c10d1aa6326f47480
- Author: Markus Klotzbücher <mk@denx.de>
- Date: Fri Nov 23 13:09:18 2007 +0100
- ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
- When using dhcp/bootp the "netmask" environment variable is not
- set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
- desireable, so the following patch adds this this option to the board
- config.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Oct 27 12:48:15 2007 -0400
- Fix/enhance ECC POST for 440EPx/GRx
- This patch allows the ECC POST to be used for different boards with the
- PPC440 Denali SDRAM controller. Modifications include skipping the test
- if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
- to prevent timing errors.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Sat Oct 27 12:48:05 2007 -0400
- PPC4xx: Move/rename ECC POST for 440EPx/GRx
- Signed-off-by: Larry Johnson <lrj@acm.org>
- commit c29d2d3680046d430022c55e50fcb27f5866517e
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 14 11:20:33 2007 +0100
- ppc4xx: use correct io accessors for 4xx ethernet POST
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit ba79fde58a48c0a6ff8e2a96caba951594142203
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Dec 14 11:19:56 2007 +0100
- ppc4xx: fix flush + invalidate_dcache_range arguments
- flush + invalidate_dcache_range() expect the start and stop+1 address.
- So the stop address is the first address behind (!) the range.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 14 08:41:29 2007 +0100
- ppc4xx: fdt: use fdt_fixup_ethernet()
- By using aliases in the dts file, the ethernet node fixup is
- much easier with the recently added functions.
- Please note that the dts file needs the aliases for this to work.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 136288847e3b04f2ff357a067ad45e10afa0a24c
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Dec 13 14:52:53 2007 +0100
- ppc4xx: Bring 4xx fdt support up-to-date
- This patch update the 4xx fdt support. It enabled fdt booting
- on the AMCC Kilauea and Sequoia for now. More can follow later
- quite easily.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Dec 27 07:50:54 2007 +0100
- cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
- The check for an sufficiently erased destination was missing in the
- buffered write function of the cfi flash driver (when
- CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
- writing to such a region will fail with the currect error message.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Nov 12 10:56:17 2007 +0100
- Some configuration updates for the TQM5200 based TB5200 board:
- - enable command line history
- - increase malloc space (because of bigger flash sectors)
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit e318d9e9021a0af7508171f84ed09d0e79f0284e
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Thu Sep 27 11:10:08 2007 +0200
- TQM8xx: use the CFI flash driver on all TQM8xx boards
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 11d9eec479b470eab9242ab937fca70a876d9376
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Sep 26 17:55:56 2007 +0200
- TQM885D: adjust for doubled flash sector size + some minor fixes
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
- Author: Jens Gehrlein <jens.gehrlein@tqs.de>
- Date: Wed Sep 26 17:55:54 2007 +0200
- TQM885D: Exchanged SDRAM timing by a more relaxed timing.
- CAS-Latency=2, Write Recovery Time tWR=2
- The max. supported bus frequency is 66 MHz. Therefore, changed
- threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit b988b8cd443989be65161888eea0127ad03f846f
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Sep 26 17:55:56 2007 +0200
- TQM885D: use calculated cpuclk instead of measuring it
- On the TQM885D the measurement of cpuclk with the PIT reference
- timer ist not necessary. Since all module variants use the same
- external 10 MHz oscillator, the cpuclk only depends on the PLL
- configuration - which is readable by software.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 492c7049869348d31168de8dad89651315e468e0
- Author: Jens Gehrlein <jens.gehrlein@tqs.de>
- Date: Thu Sep 27 14:54:46 2007 +0200
- TQM885D: fix SDRAM refresh
- At 133 MHz the current SDRAM refresh rate is too fast
- (measured 4 * 1.17 us).
- CFG_MAMR_PTA changes from 39 to 128. This result
- in a refresh rate of 4 * 7.8 us at the default clock
- 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
- This is a compromise until a new method is found to
- adjust the refresh rate.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit dabad4b9bc46908e301f73ce76b38b23626a96e9
- Author: Jens Gehrlein <jens.gehrlein@tqs.de>
- Date: Thu Sep 27 14:54:46 2007 +0200
- TQM860M: Support for 10col SDRAMs, max. 128 MiB
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 61fb15c516fef5631e305f1976d7b3a679725856
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Dec 27 01:52:50 2007 +0100
- Fix coding style issues; update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 467bcee11fe26ad422f2de971aa70866079870f2
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Dec 14 15:36:18 2007 +0100
- cfi_flash: Add manufacturer-specific fixups
- Run fixups based on the JEDEC manufacturer ID independent of the
- command set ID.
- This changes current behaviour: Previously, geometry reversal for AMD
- chips were done based on the command set ID, while they are now done
- based on the JEDEC manufacturer and device ID.
- Also add fixup for top-boot Atmel chips. A fixup is needed for
- AT49BV6416(T) too, but since u-boot currently only reads the low byte
- of the device ID, there's no way to tell it apart from AT49BV642D,
- which should not have this fixup. Since AT49BV642D support is
- necessary to get ATNGW100 board support into mainline, I've commented
- out the fixup for now.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Dec 14 15:36:17 2007 +0100
- cfi_flash: Add cmdset-specific init functions
- Move things like reading JEDEC IDs and fixing up geometry reversal
- into separate functions. The geometry reversal fixup is now performed
- by altering the qry structure directly, which makes the sector init
- code slightly cleaner.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit e23741f4a6d8047520ef0d4971762749b3587d32
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Dec 14 15:36:16 2007 +0100
- cfi_flash: Read whole QRY structure in one go
- Read out the whole CFI Standard Query structure after successful cfi
- identification. This allows subsequent code to access this information
- directly without having to go through flash_read_uchar() and friends.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Dec 17 11:02:44 2007 +0100
- AVR32: Fix logic inversion in disable_interrupts()
- disable_interrupts() should return nonzero if interrupts were
- _enabled_ before, not disabled.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit acac475212cbedb17b321a363a1c878e2b47b37f
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Dec 14 16:51:22 2007 +0100
- AVR32: Enable interrupts at bootup
- The timer code depends on the timer interrupt to keep track of the
- upper 32 bits of the cycle counter. This obviously doesn't work when
- interrupts are disabled the whole time.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 9570bcd87f4db255514f43b6701746c412f8fef0
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Nov 15 10:03:45 2007 +0100
- AVR32: Fix wrong pin setup for USART3
- As reported by Gerhard Berghofer:
- in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
- instead of PB18 and PB19.
- which is obviously correct. There's currently no code that uses
- USART3, but custom boards may run into problems.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Nov 1 12:44:20 2007 +0100
- README: Remove ATSTK1000 daughterboard list
- As noted by Kim Phillips, these lists tend to become out of date.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit c81cbbad21cb0ae983e2e796211202234cdc8be2
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Tue Oct 30 14:56:36 2007 +0100
- Add ATSTK100[234] to MAINTAINERS
- Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
- "mother". Also update the entry for ATSTK1000 to be not only about the
- AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 64ff2357b1727213803591813dbc779c924bf772
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Oct 29 13:02:54 2007 +0100
- AVR32: Add support for the ATSTK1004 board
- ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
- which is a derivative of AT32AP7000.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 667568db157f374b85abd7e03596ddd1f0b25681
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Oct 29 13:02:54 2007 +0100
- AVR32: Add support for the ATSTK1003 board
- ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
- which is a derivative of AT32AP7000.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 5fee84a794a51ec830548cda485a770efb018b92
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Oct 29 13:23:33 2007 +0100
- AVR32: Make some AT32AP700x peripherals optional
- Add a chip-features file providing definitions of the form
- AT32AP700x_CHIP_HAS_<peripheral>
- to indicate the availability of the given peripheral on the currently
- selected chip.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 36f28f8a9605ee5dcfa330482cfc62171261af97
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Oct 29 13:09:56 2007 +0100
- AVR32: Rename at32ap7000 -> at32ap700x
- The SoC-specific code for all the AT32AP700x CPUs is practically
- identical; the only difference is that some chips have less features
- than others. By doing this rename, we can add support for the AP7000
- derivatives simply by making some features conditional.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Jun 29 18:22:34 2007 +0200
- atmel_mci: Show SR when block read fails
- Show controller status as well as card status when an error occurs
- during block read.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Dec 13 14:52:53 2007 +0100
- ppc4xx: Bring 4xx fdt support up-to-date
- This patch update the 4xx fdt support. It enabled fdt booting
- on the AMCC Kilauea and Sequoia for now. More can follow later
- quite easily.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 12d30aa79779c2aa7a998bbae4c075f822a53004
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Dec 13 12:56:34 2007 +0100
- cfi_flash: Use map_physmem() and unmap_physmem()
- Use map_physmem() and unmap_physmem() to convert from physical to
- virtual addresses. This gives the arch a chance to provide an uncached
- mapping for flash accesses.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 4d7d6936eb29af7cca330937808312aa5f61454d
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Dec 13 12:56:33 2007 +0100
- Introduce map_physmem() and unmap_physmem()
- map_physmem() returns a virtual address which can be used to access a
- given physical address without involving the cache. unmap_physmem()
- should be called when the virtual address returned by map_physmem() is
- no longer needed.
- This patch adds a stub implementation which simply returns the
- physical address cast to a uchar * for all architectures except AVR32,
- which converts the physical address to an uncached virtual mapping.
- unmap_physmem() is a no-op on all architectures, but if any
- architecture needs to do such mappings through the TLB, this is the
- hook where those TLB entries can be invalidated.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Dec 13 12:56:32 2007 +0100
- cfi_flash: Introduce read and write accessors
- Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
- them to access the flash memory. This makes it clearer when the flash
- is actually being accessed; merely dereferencing a volatile pointer
- looks just like any other kind of access.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 812711ce6b3a386125dcf0d6a59588e461abbb87
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Dec 13 12:56:31 2007 +0100
- Implement __raw_{read,write}[bwl] on all architectures
- This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
- m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
- from Linux.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Oct 6 18:55:36 2007 +0200
- cfi_flash: Reorder functions and eliminate extra prototypes
- Reorder the functions in cfi_flash.c so that each function only uses
- functions that have been defined before it. This allows the static
- prototype declarations near the top to be eliminated and might allow
- gcc to do a better job inlining functions.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Dec 13 12:56:29 2007 +0100
- cfi_flash: Make some needlessly global functions static
- Make functions not declared in any header file static.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 7e5b9b471518c5652febc68ba62b432193d6abf4
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Dec 13 12:56:28 2007 +0100
- cfi_flash: Break long lines
- This patch tries to keep all lines in the cfi_flash driver below 80
- columns. There are a few lines left which don't fit this requirement
- because I couldn't find any trivial way to break them (i.e. it would
- take some restructuring, which I intend to do in a later patch.)
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Dec 11 13:59:57 2007 +0100
- CFI: synchronize command offsets with Linux CFI driver
- Fixes non-working CFI Flash on the Inka4x0 board.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Dec 7 12:17:34 2007 -0600
- Handle MPC85xx PCIe reset errata (PCI-Ex 38)
- On the MPC85xx boards that have PCIe enable the PCIe errata fix.
- (MPC8544DS, MPC8548CDS, MPC8568MDS).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Dec 7 12:04:30 2007 -0600
- Update Freescale MPC85xx ADS/CDS/MDS board config
- * Enabled CONFIG_CMD_ELF
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit d435793229ce29a42797c1edc39f5b34f987f91a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Fri Dec 7 04:59:26 2007 -0600
- Handle Asynchronous DDR clock on 85xx
- The MPC8572 introduces the concept of an asynchronous DDR clock with
- regards to the platform clock.
- Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
- mode.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 10:34:28 2007 -0600
- Update Freescale MPC85xx ADS/CDS/MDS board config
- * Removed some misc environment setup
- * Enabled CONFIG_CMDLINE_EDITING
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 10:47:44 2007 -0600
- Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
- Minor path corrections needed to ensure buildability.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 10:16:18 2007 -0600
- Move the MPC8540 ADS board under board/freescale.
- Minor path corrections needed to ensure buildability.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 870ceac5b3a3486c109396e005af81ae762b5710
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 10:14:50 2007 -0600
- Move the MPC8560 ADS board under board/freescale.
- Minor path corrections needed to ensure buildability.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 10:13:47 2007 -0600
- Move the MPC8568 MDS board under board/freescale.
- Minor path corrections needed to ensure buildability.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a853d56c59b33415304531443633808736acfc6e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 02:18:59 2007 -0600
- Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
- We already had defines for LAWAR_TRGT_IF_* that we should use
- rather than creating new ones. Also, added some missing defines for
- PCIE targets.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 04db400892da37b76a585e332a0c137954ad2015
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 02:10:09 2007 -0600
- Stop using immap_t on 85xx
- In the future the offsets to various blocks may not be in same location.
- Move to using CFG_MPC85xx_*_ADDR as the base of the registers
- instead of getting it via &immap.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 2714223f8e04ab3e4133ff65872eef366d90bfea
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 01:23:09 2007 -0600
- Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit c480861bf000156e6a3e932c258db59ff2212dd3
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 01:06:19 2007 -0600
- Update MPC8568 MDS to use libfdt
- Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Wed Nov 14 15:52:06 2007 -0500
- Add PCI Express support on MPC8568MDS
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit b90d25497625b90ffa3f2911a0895ca237556ff5
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 00:11:44 2007 -0600
- Update MPC85xx CDS to use libfdt
- Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 28 22:54:27 2007 -0600
- Update MPC8540 ADS to use libfdt
- Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5ce715802f6c50dc78b3405b92f184b1e3710519
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 28 22:40:31 2007 -0600
- Update MPC8560 ADS to use libfdt
- Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 28 00:36:33 2007 -0600
- Stop using immap_t for cpm offset on 85xx
- In the future the offsets to various blocks may not be in same location.
- Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
- instead of getting it via &immap->im_cpm.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Nov 27 23:25:02 2007 -0600
- Stop using immap_t for guts offset on 85xx
- In the future the offsets to various blocks may not be in same location.
- Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
- instead of getting it via &immap->im_gur.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 50c03c8cf494d91cdec39670d95337c743e16ec9
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Nov 27 22:42:34 2007 -0600
- Update MPC8544 DS config
- * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
- * Removed some misc environment setup
- * Moved to using fdtfile & fdtaddr as fdt env var names
- * Enabled CONFIG_CMDLINE_EDITING
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit addce57e2e4c49e77ffb2020a84690713bb18b47
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Nov 26 17:12:24 2007 -0600
- Update MPC8544DS to use libfdt
- Updated the MPC8544DS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Nov 29 00:15:30 2007 -0600
- Add libfdt based ft_cpu_setup for mpc85xx
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Dec 11 13:38:19 2007 +0100
- ppc4xx: Correct GPIO offset in gpio_config()
- Thanks to Gary Jennejohn for pointing this out.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8809a2713b1ceaf3da55d9d785470294f15de06a
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Dec 11 11:46:01 2007 +0100
- rtc: Fix merging problem
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Dec 8 14:47:34 2007 +0100
- ppc4xx: 405EX: Correctly enable USB pins
- This patch selects the USB data pins in the 405EX GPIO and MFC (multi
- function control) registers. This is done for the AMCC Kilauea and
- Makalu eval boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Dec 8 08:25:09 2007 +0100
- CFI: Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
- Author: Michael Schwingen <michael@schwingen.org>
- Date: Fri Dec 7 23:35:02 2007 +0100
- CFI: support JEDEC flash roms in CFI-flash framework
- The following patch adds support for non-CFI flash ROMS, by hooking into the
- CFI flash code and using most of its code, as recently discussed here in the
- thread "Mixing CFI and non-CFI flashs".
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c01b17dd856fa120b2970f50d9598546a4927ec3
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Wed Nov 28 21:24:50 2007 -0500
- Conditionally compile fdt_fixup_ethernet()
- Fix compiler warnings: On boards that don't have ethernets defined,
- don't compile fdt_fixup_ethernet().
- commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Nov 27 21:59:46 2007 -0600
- Convert boards that set memory node to use fdt_fixup_memory()
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Nov 26 17:06:15 2007 -0600
- Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
- We use a combination of the serialN alias and CONFIG_CONS_INDEX to
- determine which serial alias we should set linux,stdout-path to.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Nov 26 14:57:45 2007 -0600
- Add common memory fixup function
- Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Nov 26 11:19:12 2007 -0600
- Conditionally compile fdt_support.c
- Modify common/Makefile to conditionally compile fdt_support.c based
- on CONFIG_OF_LIBFDT.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit d88e7ba0980773479e1a64badb293116071b7ef0
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Nov 26 10:41:40 2007 -0600
- Fix build breakage due to libfdt import
- The IDS8247 got lost in the update and need an API update
- do to rename of functions in libfdt.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Fri Nov 23 19:43:20 2007 -0500
- Add spaces around the = in the fdt print format.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Fri Dec 7 01:25:38 2007 +0900
- sh: Moved driver of the SuperH dependence
- The composition of the directory in the drivers/ changed.
- I moved SuperH serial driver and marubun PCMCIA driver.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Dec 6 10:21:19 2007 +0100
- Release v1.3.1
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Dec 6 10:21:03 2007 +0100
- ADS5121 Board: fix compile problem.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a27044b14a9e93678a82d7b35f202b93e7687abc
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Dec 6 05:58:43 2007 +0100
- ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
- This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
- setting the FIXD bit in the SDR0_MFR register. Here a description of the
- symptoms:
- Problem Description
- ------------------------------
- If a DMA is performed between memory and PCI with the DMA 1 Controller
- using prefetch, and as a result uses a special purpose buffer selected by
- the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
- the first part of the transfer sequence is performed twice. The
- PPC440SPe PCI Controller requests more data than was needed such that in
- the case of enforce memory protection, a host CPU exception can occur.
- No data is corrupted, because data transfer is stopped in the PCI
- Controller. Prefetch enable is specified by setting DMA Configuration
- Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
- Behavior that may be observed in a running system
- ---------------------------------------------------------------------------
- 1. DMA performance is decreased because of the double access on the PCI bus
- interface.
- 2. If an illegal access to some address on the PCI bus is detected at the
- system level, a machine check or similar system error may occur.
- Workarounds Available
- ----------------------------------
- 1. Do not program prefetch. Note that a prefetch command cannot be programmed
- without selecting a special purpose buffer.
- 2. To avoid crossing a physical boundary of the PCI slave device, add 512
- bytes of address to the PCI address range.
- This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
- from AMCC and slighly changed.
- Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Dec 4 16:29:48 2007 +0100
- ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Dec 3 00:15:28 2007 +0100
- Prepare for 1.3.1-rc1
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e15e33433e7c05111968dc9b434a52fd42cbd221
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Nov 30 07:15:41 2007 +0100
- ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
- This manual PCIe reset triggering solves the problem seen with the
- Intel EPRO/1000 card, which was not detected (link not established)
- upon power-up reset.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 260eea5676ca46903a335686cc020b29c4ca46fe
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Nov 29 01:21:54 2007 +0900
- sh: Add SuperH boards maintainer to MAINTAINERS file
- Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Thu Nov 29 00:13:04 2007 +0900
- sh: Add ms7750se support in MAKEALL
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit c7144373427a178332bf9754131c8c34c52c200a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Nov 27 09:44:53 2007 +0100
- sh: Add sh3 and sh4 support in MAKEALL
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 130080874a3d28450098481a262c5f7c855e908d
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Nov 25 02:51:17 2007 +0900
- sh: Add document for SuperH.
- This document is a summary of information concerning SuperH of U-Boot.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Nov 25 02:39:31 2007 +0900
- sh: Add marubun's pcmcia driver
- Marubun pcmcia is a chip for PCMCIA used with SuperH.
- Of course, this can be used even by other architectures.
- When use this driver, came to be able to use CompactFlash
- and Ethernet.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit febd86b969b975289ed948f1ac0eb9722da41ced
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Nov 25 02:32:13 2007 +0900
- sh: Update SuperH SCIF driver
- - Changed volatile unsigned to vu_.
- - Changed Makefile for kconfig.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 8be760903645af09871be50ad0a6f9ebb62b311d
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 27 11:57:35 2007 +0100
- ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
- After an error in the AMCC 405EX users manual now correctly configure
- IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
- usage.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Nov 26 19:18:21 2007 +0100
- Cleanup coding style; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Nov 25 22:39:25 2007 +0100
- MAKEALL: add missing 512x boards in ppc
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit a340c325e668ca7386c2276387681720be9c3757
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Nov 25 18:45:47 2007 +0100
- Makefile : fix tags ctags etags with new drivers organization
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 26 15:06:14 2007 +0100
- ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
- As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
- operation.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ca1ce226287270bb01e25b8e3674c701f12edf19
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 26 15:01:45 2007 +0100
- ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Nov 25 18:45:47 2007 +0100
- Makefile : fix tags ctags etags with new drivers organization
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 59829cc189378c142c13d2aa8d9a897d8bef3961
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 21:26:56 2007 +0100
- drivers/mtd : move mtd drivers to drivers/mtd
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 318c0b90431f2648552e5ade78833f42652ce859
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 21:17:55 2007 +0100
- drivers/misc : move misc drivers to drivers/misc
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 33daf5b7858807cb4ce4158c2c56524671c14c08
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 21:13:59 2007 +0100
- drivers/block : move block drivers to drivers/block
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 0c698dcaa70275eb8814f665b545547cee013892
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 20:59:50 2007 +0100
- drivers/rtc : move rtc drivers to drivers/rtc
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f868cc5a50757d94f36c312395481cb0f187d9e6
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 20:14:44 2007 +0100
- drivers/hwmon : move hardware monitor drviers to drivers/hwmon
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 19:46:45 2007 +0100
- drivers/input : move input drivers to drivers/input
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit e4558666293364fc3af1c1d9381ca933fa0f1275
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 19:40:11 2007 +0100
- drivers/usb : move usb drivers to drivers/usb
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 24 19:33:38 2007 +0100
- drivers/serial : move serial drivers to drivers/serial
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Nov 21 21:19:24 2007 +0100
- drivers/net : move net drivers to drivers/net
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 352d259130b349fe9593b8dada641bd78a9659e5
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Nov 20 20:41:48 2007 +0100
- drivers/video : move video drivers to drivers/video
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 73646217186aa17afc8e305c5f06f06dd335eaad
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Nov 20 20:33:09 2007 +0100
- drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Nov 20 20:28:09 2007 +0100
- drivers/pci : move pci drivers to drivers/pci
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 9162352817579840d7802da6d85872b3ca003c97
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Thu Nov 22 17:23:23 2007 -0500
- Fix fdt printing for updated libfdt
- Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 21 13:30:15 2007 -0600
- Add additional fdt fixup helper functions
- Added the following fdt fixup helpers:
- * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
- * do_fixup_by_compat{_u32} - Find matching nodes by compat
- The _u32 variants work the same only the property they are setting
- is know to be a 32-bit integer instead of a byte buffer.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 21 11:11:03 2007 -0600
- Add fdt_fixup_ethernet helper to set mac addresses
- Added a fixup helper that uses aliases to set mac addresses
- in the device tree based on the bd_t
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit dbaf07ce620aab249e3502b20a986234a6af1d3a
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 21 14:07:46 2007 -0600
- Fix warnings from import of libfdt
- cmd_fdt.c: In function fdt_print:
- cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
- cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
- cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
- cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 8d04f02f6224e6983f4812ea4da704950ec8539c
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Oct 24 11:04:22 2007 -0500
- Update libfdt from device tree compiler (dtc)
- Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
- the device tree compiler (dtc) project.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e93becf80d732b64aef81b23e8b6ece02c40533d
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Sat Nov 3 19:46:28 2007 -0500
- Move do_fixup* for libfdt into common code
- Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
- into common/fdt_support.c and renamed:
- do_fixup() -> do_fixup_by_path()
- do_fixup_u32() -> do_fixup_by_path_u32()
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f738b4a75998f42a7408defadc9baac7a31c92db
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Oct 25 16:15:07 2007 -0500
- Make no options to fdt print default to '/'
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Oct 24 10:21:57 2007 -0500
- Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
- Removed:
- fdt_node_is_compatible
- fdt_find_node_by_type
- fdt_find_compatible_node
- To ease merge of newer libfdt as we aren't using them anywhere at this time.
- Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
- reason.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 98e2867cc85409b919f862e6c16026461ec955df
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Wed Nov 21 09:19:37 2007 -0700
- [BUILD] Remove libraries when updating autoconf.mk
- Fix library problems caused by conditional compilation. Using
- autoconf.mk to decide which files to compile has caused a problem when
- changing configuration from one board to another without clearing out
- the library (*.a) files.
- It used to be that the linker was always passed the same list of .o
- files when building the .a files. However, that is not longer true
- with conditional compilation. Now, a different board config will have
- a different file list passed to the linker. The problem occurs when
- a library has already been built and the board config is changed.
- Since the linker will update instead of replace a preexisting library,
- then if the file list changes to remove some object files the old
- objects will still exist in the library.
- The solution is to remove all old library files when autoconf.mk is
- made.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Nov 21 08:49:50 2007 -0600
- [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
- Modify libfdt/Makefile to conditionally compile the *.c files based
- on the board config.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 4a43719a7738712811d822ca8125427b27a55cdc
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:31 2007 -0600
- [BUILD] conditionally compile common/cmd_*.c in common/Makefile
- Modify common/Makefile to conditionally compile the cmd_*.c files based
- on the board config.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:31 2007 -0600
- [BUILD] Generate include/autoconf.mk from board config files
- Use cpp and sed to postprocess config.h and import the defined values
- into include/autoconf.mk. autoconf.mk is then included by config.mk to
- give 'make' access to the board configuration.
- Doing this enables conditional compilation at the Makefile level instead
- of by wrapping every .c file with #ifdef/#endif wrappers.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 68b88999da87ab88e71e1306192905be3450198e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Nov 20 15:02:26 2007 -0600
- 8610HPCD: Enable the 8610 Display Interface Unit
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Nov 20 15:00:53 2007 -0600
- Move 8610 DIU interface structure definitions to header file.
- These two structures are still needed during the
- initialization and setup of the DIU hardware.
- So move them to the fsl_diu_fb.h file for now.
- Official "blah".
- Noticed-by: York Sun <yorksun@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 080c646dbf474a109c3f85718fb01ce042a38c45
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Nov 20 20:14:18 2007 +0100
- drivers/i2c : move i2c drivers to drivers/i2c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 9a337ddc154a10a26f117fd147b009abcdeba75a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Nov 19 22:20:24 2007 +0100
- Prepare for 1.3.0 release.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit f30ad49b16bf998b03c1a5228b6c86369d61c258
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Mon Nov 19 10:02:13 2007 -0500
- Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
- CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit f8c320609366176b31104d9bf5e295232e1c7f1d
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Mon Nov 19 11:14:16 2007 +0900
- [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
- lowlevel_init.S: Assembler messages:
- lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
- Looking at codes, the `memtest' and `clearmem' are intentional mixed
- use of `global symbols' and `label' for debugging purpose. To make it
- build, just disable global-symbols-use for now. As a result `memtest'
- still remains as unused, but leave it be...
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Nov 19 12:59:14 2007 +0100
- Fix build problems with mp2usb board
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6bf4c686afca1e86e1c384d59218f914605713bf
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Nov 18 18:36:11 2007 +0100
- s3c24x0: Fix usb_ohci.c missing in Makefile
- and usb_ohci.c warning differ in signedness
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6073f61e078da5ddb521b56256bcc36508589883
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Nov 18 12:55:02 2007 +0100
- pb1x00 board: Fix u16 status declaration when PCMCIA is defined
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Nov 18 17:11:09 2007 +0100
- Fix compiler warnings for ARM systems.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Nov 18 16:36:27 2007 +0100
- Fix compiler warnings for PPC systems. Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 653811a3c2b35856bf12e196dcc8c4694e28e420
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Nov 18 14:44:44 2007 +0100
- ppc4xx: Correct 405EX PCIe UTL register mapping
- Map 4k mem space for UTL registers for each port.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Nov 17 11:31:10 2007 +0100
- Fix warning differ in signedness in net/net.c and net/nfs.c
- commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Nov 17 20:42:45 2007 +0900
- gth2.c: Fix a warning on gth2 build.
- gth2.c: In function 'misc_init_r':
- gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 2309c130aa4c84b91bd874a41269c923eb61b555
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Nov 17 07:58:25 2007 +0100
- Fix warning differ in signedness in common/cmd_scsi.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9ea61b57968554eaf0f474ec7e088b17d367f474
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Nov 17 14:52:29 2007 +0100
- ppc4xx: Update AMCC Kilauea config file
- - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Nov 17 20:05:26 2007 +0900
- [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
- Current trick to pick up GNU assembler minor version does not work with the
- latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
- "(GNU Binutils) ".
- $ sde-as --version |grep "GNU assembler"
- GNU assembler 2.15.94 mipssde-6.02.02-20050602
- $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
- 2.15.94
- $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
- 15
- $
- $ mips-linux-as --version |grep "GNU assembler"
- GNU assembler (GNU Binutils) 2.18
- $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
- (GNU
- $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
- (no output)
- $
- As a result of above, you'll see many noises with such binutils:
- make -C cpu/mips/
- /bin/sh: line 0: [: : integer expression expected
- /bin/sh: line 0: [: : integer expression expected
- make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
- mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
- /bin/sh: line 0: [: : integer expression expected
- mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
- /bin/sh: line 0: [: : integer expression expected
- mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
- /bin/sh: line 0: [: : integer expression expected
- This patch simplifies the trick and makes it work with both versions of gas.
- I also replace an expensive `awk (or gawk)' with `cut'.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 16664f72850846e645616da1c0fa5afcd6d15f15
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Nov 17 20:05:26 2007 +0900
- [MIPS] Remove useless instructions for initializing $gp.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 03c031d5660ea946c39af6e2e16267da857c609f
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Oct 27 15:27:06 2007 +0900
- [MIPS] MIPS 4K core: Coding style cleanups
- No logical changes.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Nov 17 20:05:20 2007 +0900
- [MIPS] gth2.c: Fix a warning on gth2 build.
- gth2.c: In function 'misc_init_r':
- gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 4fbd0741b2b6441da10be93e10267122581b7079
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Oct 27 15:22:33 2007 +0900
- [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
- au1x00_eth.c: In function 'au1x00_miiphy_write':
- au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit f01320459736f156707425cf8112f98606301aa4
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Oct 27 15:00:25 2007 +0900
- [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
- au1x00_eth.c: In function 'au1x00_enet_initialize':
- au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
- au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
- au1x00_eth.c:246: error: for each function it appears in.)
- au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
- au1x00_eth.c: In function 'au1x00_miiphy_write':
- au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
- make[1]: *** [au1x00_eth.o] Error 1
- Fixed by moving these two functions forward.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit b09258c5393edd1087c5f39ae68338f16b49f8b3
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Oct 27 15:00:25 2007 +0900
- MAKEALL: Added missing pb1000 board
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Oct 27 15:00:24 2007 +0900
- [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Sat Oct 27 15:00:24 2007 +0900
- [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit 5947f6999aafa7c54c1390983d264a8463dfea8e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Nov 17 02:34:38 2007 +0100
- Update CHANGELOIG, prepare for -rc4
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
- Author: Luotao Fu <l.fu@pengutronix.de>
- Date: Wed Nov 14 18:58:33 2007 +0100
- Fix the i2c frequency and default address in rsdproto board
- rsdproto board support has wrong I2C frequency and wrong return value
- handling.
- Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
- commit 429c180edad038f91c989cb14b478228092e7054
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Nov 17 01:45:38 2007 +0100
- powerpc: Backout relocation changes for MPC5121, too.
- Apply Grant Likely's backout to MPC5121 code, too.
- Pointed out by Rafal Jaworowski <raj@semihalf.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Nov 13 22:18:33 2007 -0700
- powerpc: Backout relocation changes.
- Ugh. I *hate* to back this change out, but these compiler flags don't
- work for relocation on all versions of GCC. I've not been able to
- reproduce the environment in my setup (and hence, not been able to
- find a combination that *does* work), so I've got no choice but to go
- back to the old gcc flags and linker script.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Tue Nov 13 09:11:05 2007 +0100
- Fixed mips_io_port_base build errors.
- This patch has been sent on:
- - 29 Sep 2007
- Although mips_io_port_base is currently a part of IDE command, it is quite
- fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
- it to MIPS general part, and introduce `set_io_port_base()' from Linux.
- This patch is triggered by multiple definition of `mips_io_port_base' build
- error on gth2 (and tb0229 also needs this fix.)
- board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
- /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
- common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
- make: *** [u-boot] Error 1
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Nov 17 01:30:40 2007 +0100
- Fix a bug in the slave serial programming mode for the Xilinx
- Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
- the most significant bit was set, which did not work on any
- architecture where "char" defaulted to be an unsigned type.
- Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Nov 1 12:23:29 2007 -0500
- 86xx: Fix broken variable reference when #def DEBUGing.
- Sometimes you can't reference the DDR2 controller variables.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Oct 26 18:32:00 2007 +0800
- make 8610 board use pixis reset
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Mon Oct 29 19:26:21 2007 +0800
- Unify pixis_reset altbank across board families
- Basically, refactor the CFG_PIXIS_VBOOT_MASK values
- into the separate board config files.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 64bf555465c7926be13e1046ac0d0f05ac72829c
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Nov 7 08:19:21 2007 +0100
- Fix warning: pointer targets in assignment differ in signedness
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 7a60ee7c6248a958c5757d3660a1702723a2786d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Nov 7 08:19:19 2007 +0100
- Fix warning differ in signedness in common/cmd_ide.c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Nov 16 14:16:54 2007 +0100
- ppc4xx: Enable 405EX PCIe UTL register configuration
- Till now the UTL registers on 405EX were not initialized but left with
- their default values. This patch new initializes some of the UTL
- registers on 405EX.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Nov 16 14:00:59 2007 +0100
- ppc4xx: Update AMCC Makalu for board rev 1.1
- This patch adds changes needed for Makalu rev 1.1:
- - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
- - Enable 2nd ethernet port EMAC1
- - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
- - Reset PCIe ports via GPIO upon bootup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4d4faae65e115e327425cd514c1a35146a85166b
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:31 2007 -0600
- Group PCI and PCMCIA drivers in drivers/Makefile
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5798f87dc10a496d79d3177b9f5a76488987fd35
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:31 2007 -0600
- Group block/flash drivers in drivers/Makefile
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit df58c81551700f058b44cacf55a7997fa63bfe0a
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:31 2007 -0600
- Group USB drivers in drivers/Makefile
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:30 2007 -0600
- Group i2c drivers in drivers/Makefile
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit ec00c76de0e5971273905998d62d6bb119324218
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:30 2007 -0600
- Group console drivers in drivers/Makefile
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 754f230aa01b8c789fc31f8013c2487954073300
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:30 2007 -0600
- Group network drivers in drivers/Makefile
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f0037c56b0d12cd46215124667b9f83d60ef9391
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:30 2007 -0600
- Build: split COBJS value into multiple lines
- This change is in preparation for condtitionial compile support in the
- build system. By spliting them all into seperate lines now, subsequent
- patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
- be less invasive and easier to review
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Mon Sep 24 09:05:30 2007 -0600
- Add .gitignore files
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit 955413f35f054a82e40042f1dbcf501c6a05719b
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:27:52 2007 -0700
- Revert "Correct relocation fixup for mpc5xx"
- This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit e15633888a058aacb31a62d2cf1278e1e4c236ab
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:24:32 2007 -0700
- Revert "Correct fixup relocation for MPC5xxx"
- This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:21:04 2007 -0700
- Revert "Correct fixup relocation for mpc8220"
- This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 70922342369e5e39b286fe21e768a239ca07a514
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:20:57 2007 -0700
- Revert "Correct fixup relocation for mpc824x"
- This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:20:50 2007 -0700
- Revert "Correct fixup relocation for mpc8260"
- This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:20:43 2007 -0700
- Revert "Correct fixup relocation for mpc83xx"
- This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Nov 15 08:20:25 2007 -0700
- Revert "[MPC512x] Correct fixup relocation"
- This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Nov 15 14:25:09 2007 +0100
- ppc4xx: Small AMCC Kilauea cleanup
- Remove not needed pci_target_init() function.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit aee747f19b460a0e9da20ff21e90fdaac1cec359
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Nov 15 14:23:55 2007 +0100
- ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
- - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
- - Cleanup of the 4xx GPIO functions
- - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Nov 15 14:20:08 2007 +0100
- ppc4xx: AMCC Taihu board config file cleanup
- This patch makes the AMCC Taihu a little more compatible to the other
- AMCC eval boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Nov 15 13:37:28 2007 +0100
- [INKA4x0] NG hardware: flash support
- Disabled and remove inka4x0 custom flash driver, use CFI flash
- driver instead.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 5fb6d7191e206cdde0e23140fd8111caed93a595
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Nov 15 13:29:55 2007 +0100
- [INKA4x0] NG hardware: SDRAM support
- Add support for three new DDR chips that may be present on a NG
- INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
- Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit f23cb34c367bb27585a4fdb8a75277370e7d0596
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Thu Nov 15 13:24:43 2007 +0100
- [INKA4x0] NG hardware: platform code update
- - Cleanup compile warnings.
- - Add missing '\0' in default environment.
- - Increase CFG_MONITOR_LEN to 256 KiB.
- - Add required CFG_USE_PPCENV.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Thu Nov 15 08:58:00 2007 +0000
- Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
- Remove warnings re onenand_read() & write()
- commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Thu Nov 15 08:45:13 2007 +0000
- Correction patch
- commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
- Author: Roy Zang <tie-fei.zang@freescale.com>
- Date: Thu Sep 13 18:52:28 2007 +0800
- Enable ULi1575 Ethernet support in 8610HPCD config
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 13 08:18:20 2007 +0100
- ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 13 08:06:11 2007 +0100
- ppc4xx: Fix 405EX PCIe UTLSET register setup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1ce55151c85d068f70317a8d65c61058b891afb4
- Author: Heiko Schocher <hs@denx.de>
- Date: Tue Nov 13 07:50:29 2007 +0100
- [UC101] SRAM now with 2 MB working.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 2d14684341109a69616e4d6016cd61402d55086f
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Nov 9 15:37:53 2007 +0100
- ppc4xx: Use generic usb-ohci driver for sequoia board
- This patch makes the sequoia board use the generic usb-ohci driver
- instead of cpu/ppc4xx/usb_ohci.c.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Nov 9 15:37:23 2007 +0100
- ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
- This patch disables the 44x d-cache on 'usb start' and
- reenables it on 'usb stop'. This should be seen as a
- temporary fix until the generic usb-ohci driver can
- life with d-cache enabled.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Nov 9 15:36:44 2007 +0100
- ppc4xx: Remove redundant code from 4xx network driver
- This patch removes some redundant code and decrements the end
- address of cache flush and invalidate by 1.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5ca9881aad8c413ac2a82868a5e3719178254502
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Fri Nov 9 15:24:26 2007 +0000
- Add apollon board support
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit b53313dbfc74525d85f1e7e0102f902d5c863beb
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Nov 9 12:19:58 2007 +0100
- ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c7f69c340277935a6c19a956421852da944a365f
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Nov 9 12:18:54 2007 +0100
- ppc4xx: Make output a little shorter on I2C bootrom detection
- Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
- already print a line with the information which I2C bootrom is
- used for bootstrap configuration. So we don't need this extra line
- with "I2C boot EEPROM en-/dis-abled".
- This patch also has a little code cleanup integrated.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8d737a28152ec12873f8544cca1fb39a49e5e693
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Nov 8 12:50:18 2007 -0600
- ColdFire: MCF5329 - Remove reset registers from CCM
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Nov 8 12:31:11 2007 -0600
- ColdFire: MCF5329 - Add Reset structure to immap_5329.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Nov 8 12:19:01 2007 -0600
- ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 225a24b5e062ad94627424508ae814f51dbe1a34
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Nov 7 18:00:54 2007 -0600
- ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 248c7c14835f34d5d910b45e5600050e58ca6cab
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Nov 7 17:56:15 2007 -0600
- ColdFire: MCF532x - Update do_reset() using core reset
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Nov 7 17:51:00 2007 -0600
- ColdFire: Update cpu flag for 4.2-xx compiler
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 070ba56115b4da63b46e974287fa4550d4023386
- Author: York Sun <yorksun@freescale.com>
- Date: Wed Oct 31 14:59:04 2007 -0500
- 8610: Add console frame buffer support to FSL 8610 DIU driver.
- Add cfb console support to FSL 8610 DIU driver.
- Inspect board version from PIXIS to obtain correct pixel format.
- Use #define CONFIG_VIDEO in config file to enable fb console.
- To switch monitor, set monitor variable to
- 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
- followed by "diufb init".
- Preserve logo bitmap at the top of the fb console.
- Signed-off-by: York Sun <yorksun@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a877880c6949e948bd63cd6ea4e216573d2f53dd
- Author: York Sun <yorksun@freescale.com>
- Date: Mon Oct 29 13:58:39 2007 -0500
- 8610: Add 8610 DIU display driver
- 1280x1024 and 1024x768 @ 32 bpp are supported now.
- DVI, Single-link LVDS, Double-link LVDS are all supported.
- Environmental variable "monitor" is used to specify monitor port.
- A new command "diufb" is introduced to reinitialize monitor
- and display a BMP file in the memory. So far, 1-bit, 4-bit,
- 8-bit and 24-bit BMP formats are supported.
- diufb init
- - initialize the diu driver
- Enable the port specified in the environmental variable "monitor"
- diufb addr
- - display bmp file in memory.
- The bmp image should be no bigger than the resolution, 1280x1024
- for DVI and double-link LVDS, 1024x768 for single-link LVDS.
- Note, this driver allocate memory but doesn't free it after use
- It is written on purpose -- to avoid a failure of reallocation
- due to memory fragement.
- ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
- Signed-off-by: York Sun <yorksun@freescale.com>
- Signed-off-by: Jon loeliger <jdl@freescale.com>
- commit 52e5ddfecdda308f75782fae206b677b1810f5f9
- Author: York Sun <yorksun@freescale.com>
- Date: Wed Oct 31 10:43:59 2007 -0500
- FSL: Add a freescale bitmap logo.
- This Freescale logo is a 340 x 128 x 4bpp BMP file
- that can be displayed by the DIU Framebuffer driver.
- Signed-off-by: York Sun <yorksun@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
- Author: York Sun <yorksun@freescale.com>
- Date: Mon Oct 29 13:57:53 2007 -0500
- 8610: Make some extra debug environment variables conditional.
- One may #define ENV_DEBUG to get them back again.
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Mon Oct 29 19:26:21 2007 +0800
- 8610: Actually enable pixis_reset CONFIGs
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit f3bceaab230b4748d0afc4109b6837308f018b40
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Oct 26 18:31:59 2007 +0800
- Fix the BAT definition of PCI IO on 8610 board
- The address in the BAT register is aligned with the BAT size.
- The original definition actually did not define BAT for PCIE2 IO.
- This patch fix this.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Mon Oct 29 19:26:21 2007 +0800
- Unify pixis_reset altbank across board families
- Basically, refactor the CFG_PIXIS_VBOOT_MASK values
- into the separate board config files.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Oct 26 18:32:00 2007 +0800
- make 8610 board use pixis reset
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Nov 1 12:23:29 2007 -0500
- 86xx: Fix broken variable reference when #def DEBUGing.
- Sometimes you can't reference the DDR2 controller variables.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
- Author: Roy Zang <tie-fei.zang@freescale.com>
- Date: Mon Nov 5 17:39:24 2007 +0800
- Implement general ULi 526x Ethernet driver support in U-boot
- This patch implements general ULi 526x Ethernet driver.
- Until now, it is the only native Ethernet port on
- MPC8610HPCD board, but it could be used on other boards
- with ULi 526x Ethernet port as well.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Thu Nov 1 08:46:50 2007 -0500
- NET: Add Ethernet 1000BASE-X support for PPC4xx
- This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
- "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
- returns non-zero iff the PHY registers are configured for 1000BASE-X. The
- "mii info" command is modified to distinguish between 1000BASE-T and -X.
- Signed-off-by: Larry Johnson <lrj@acm.org>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 298035df4948b113d29ac0e694717d34b95bc5dc
- Author: Larry Johnson <lrj@arlinx.com>
- Date: Wed Oct 31 11:21:29 2007 -0500
- NET: Cosmetic changes
- Signed-off-by: Larry Johnson <lrj@acm.org>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 654f38b3a387886996a5a75771fbfc29cb4f225e
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 5 07:43:05 2007 +0100
- ppc4xx: Make output a little shorter on PCIe detection
- Now not max 3 lines but 2 lines are printed per PCIe port.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 992742a5b09d9040adbd156fb90756af66ade310
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Nov 3 23:09:27 2007 +0100
- Cleanup coding style; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e881cb563e32f45832b7b6db77bdcd017adcbb41
- Author: Bruce Adler <bruce.adler@ccpu.com>
- Date: Fri Nov 2 13:15:42 2007 -0700
- fix wording in README
- Changed the wording to properly describe the shadowing
- of the environment from ROM to RAM
- Signed-off-by: Bruce Adler <bruce.adler@acm.org>
- commit ad845beef06245426c57b53dcdc01b7dc70e0d45
- Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Date: Wed Oct 31 02:18:15 2007 +0900
- blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- commit ec22755799466c8a103664bb3a5e647bf9c238f4
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Thu Oct 25 16:08:14 2007 +0300
- Trimmed some variables in ne2000.c
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Thu Oct 25 17:51:27 2007 +0800
- Fix the issue of usb_kbd driver missing the scan code of key 'z'.
- The scan code of the key 'z' is 0x1d, which should be handled.
- The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
- controller.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Thu Oct 25 17:30:04 2007 +0800
- Fix USB support issue for MPC8641HPCN board.
- The configuration file has already enabled USB, but it
- missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
- on MPC8641HPCN can not work because of the wrong USB
- register endian.
- And add the USB command to U-Boot commands list.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit 4e62041023dc3de9d98d977bb080235bc6d035e0
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Wed Oct 24 18:16:01 2007 +0200
- Use config_cmd_default.h instead of config_cmd_all.h
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 56622f87857439b1c221e9deef11a9d5bb5d4308
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Oct 24 01:37:36 2007 +0200
- TQM5200: Call usb_cpu_init() during board init
- usb_cpu_init() configures GPS USB pins, clocks, etc. and
- is required for proper operation of kernel USB subsystem.
- This setup was previously done in the kernel by the fixup
- code which is being removed, thus low level init must be
- done by U-boot now.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Oct 23 16:25:50 2007 +0200
- Fix typo in nfs.c
- An obvious typo. Originally fixed in linkstation u-boot port.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
- Author: Guennadi Liakhovetski <lg@denx.de>
- Date: Tue Oct 23 14:35:05 2007 +0200
- Fix a typo in cpu/mpc824x/interrupts.c
- Since December 2003 the timer_interrupt_cpu() function in
- cpu/mpc824x/interrupts.c contains what seems to be a superfluous
- parameter. Remove it.
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
- Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
- Date: Wed Oct 17 11:13:51 2007 +0200
- add ft_cpu_setup(..) on mpc8260
- Add ft_cpu_setup(..)-function to adapt it for use with libfdt
- based on code from mpc5xxx
- Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
- --
- commit 6abd82e19ae93c0b4d104e50165e235915ec0875
- Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
- Date: Wed Oct 17 11:18:42 2007 +0200
- changes for IDS8247 board support
- To get the IDS8247 board working following are done:
- - FCC2 is deactivated
- - FCC1 is activated
- - I2C is activated
- - CFI driver is activated
- - Adapted for use with LIBFDT
- Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
- --
- commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Nov 3 12:08:28 2007 +0100
- ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
- This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
- Again, only one image supports both targets.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed Oct 24 15:48:37 2007 +0200
- ATSTK1002: Remove default ethernet addresses
- Wolfgang is right: It's not a good idea to set up default initial
- ethernet addresses for a board, even though they belong to the local
- range.
- This will change the failure mode from "IT manager screams at you for
- using duplicate ethernet addresses" to a nice error message explaining
- that the ethernet address hasn't been set properly.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit e5c794e491a57d829b6d8733e2ed8368a2269abf
- Author: Justin Flammia <jflammia@savantav.com>
- Date: Mon Oct 29 17:40:35 2007 -0400
- DHCP Client Fix
- This is a multi-part message in MIME format.
- commit e6e505eae94ed721e123e177489291fc4544b7b8
- Author: Justin Flammia <jflammia@savantav.com>
- Date: Mon Oct 29 17:19:03 2007 -0400
- Found a bug in the way the DHCP Request packet is built, where the IP address
- that is offered by the server is bound to prematurely. This patch is a fix of
- that bug where the IP address offered by the DHCP server is not used until
- after the DHCP ACK from the server is received.
- Signed-off-by: Justin Flammia <jflammia@savantav.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 5d96d40d3f36da33348e68f9ea993f383e11f997
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 20:58:34 2007 +0100
- ppc4xx: Fix acadia_nand build problem
- Since the cache handling functions were moved from start.S into cache.S
- the acadia NAND booting Makfile needs to be adapted accordingly.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 20:57:11 2007 +0100
- ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
- This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
- and to the Sequoia TLB init code. Now the cache can be enabled on 44x
- boards by defining CONFIG_4xx_DCACHE in the board config file. This
- option will disappear, when more boards use is successfully and no
- more known problems exist.
- This is tested successfully on Sequoia and Katmai. The only problem that
- needs to be fixed is, that USB is not working on Sequoia right now, since
- it will need some cache handling code too, similar to the 4xx EMAC driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 20:51:10 2007 +0100
- ppc4xx: Enable CPU POST test for 4xx with dcache enabled
- Now with caches enabled (i- and d-cache) on 44x, we need a chance to
- disable the cache for the CPU POST tests, since these tests consist
- of self modifying code. This is done via the new change_tlb() function.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f71b2888b4b3c870909a0341427b2a914246f81f
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 20:47:26 2007 +0100
- ppc4xx: Change 4xx POST ethernet test to handle cached memory too
- This patch enables the 4xx EMAC POST driver to work too, when dcache is
- enabled.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a2685904061b35a17583d65fe47cdc2686a69eaa
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 20:45:53 2007 +0100
- ppc4xx: Remove temporary TLB entry in POST cache test only for 440
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ff768cb168d8157c24a25016dbfbeb465e47f420
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 18:01:24 2007 +0100
- ppc4xx: Change 4xx ethernet driver to handle cached memory too
- This patch enables the 4xx EMAC driver to work too, when dcache is
- enabled.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 483e09a223c666269ef81d3573a6591b1046b0ef
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 17:59:22 2007 +0100
- ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
- This function is used to either turn cache on or off in a specific
- memory area.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 17:57:52 2007 +0100
- ppc4xx: Remove cache definition from 4xx board config files
- All 4xx board config files don't need the cache definitions anymore.
- These are now defined in common headers.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9b94ac61d2176185c30adf0793e079ec30e68687
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 31 17:55:58 2007 +0100
- ppc4xx: Rework 4xx cache support
- New cache handling functions added and all existing functions
- moved from start.S into seperate cache.S.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 06713773da4ac3d390c63d82641eb553224b27c2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 18:03:12 2007 +0200
- ppc4xx: Remove compiler warning from previous commit
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 14:40:30 2007 +0200
- ppc4xx: Remove temporary TLB entry in POST cache test
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1338e6a81834099ba19733b69aafd8ef5f098094
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 14:05:08 2007 +0200
- ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
- I lately noticed, that newer 4xx board with GBit support sometimes don't
- finish link autonegotiation in 4 seconds. Changing this timeout to 5
- seconds seems fine here.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 14:03:17 2007 +0200
- ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
- This patch changes all in32/out32 calls to use the recommended in_be32/
- out_be32 macros instead.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Oct 25 12:24:59 2007 +0200
- ppc4xx: Fix POST ethernet test for Haleakala
- The POST ethernet test needed to be changed to dynamically determine
- the count of ethernet devices. This code is cloned from the 4xx
- ethernet driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 11:31:05 2007 +0200
- ppc4xx: Correct UART input clock calculation and passing to fdt
- We now use a value in the gd (global data) structure for the UART input
- frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
- in get_sys_info().
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 10:10:08 2007 +0200
- ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
- The Haleakala is nearly identical with the Kilauea eval board. The only
- difference is that the 405EXr only supports one EMAC and one PCIe
- interface. This patch adds support for the Haleakala board by using
- the identical image for Kilauea and Haleakala. The distinction is done
- by comparing the PVR.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9f798766aa85e62eb8fa8c721e148df609b78137
- Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
- Date: Tue Oct 23 08:29:10 2007 +0200
- ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
- This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
- Note:
- As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
- DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
- modules are still plugged in. So it is recommended to remove the DIMM
- modules while using the NAND booting code with the fixed SDRAM setup!
- Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 16:24:44 2007 +0200
- ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3248f63ad89cb031491edb7016587fe6e9a238b9
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 16:22:40 2007 +0200
- ppc4xx: Rework of 4xx serial driver (4)
- Change 4xx_uart.c:
- - Use in_8/out_8 macros instead of in8/out8
- - No need for UART_BASE marco anymore, now really handled via function
- parameter
- - serial_init_common() introduced
- - Further coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e61cb8163a66b8a135696ae232e2bead1ce0a049
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 15:45:49 2007 +0200
- ppc4xx: Rework of 4xx serial driver (3)
- Change all linker scripts to reference the changed driver name iop480_uart.o.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 882ae41274921f9016131806bdeb27e19606f47a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 15:44:39 2007 +0200
- ppc4xx: Rework of 4xx serial driver (2)
- Change all linker scripts to reference the changed driver name 4xx_uart.o.
- Note: In most cased all these explicit referencing of these object files
- in the linker scripts is not neccessary. Only for manually embedded
- environment into the U-Boot image, which is not done is most cases.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ad31e40bed042cb670d0036fea96435007afb838
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 15:09:59 2007 +0200
- ppc4xx: Rework of 4xx serial driver (1)
- This patch starts the rework of the PPC4xx serial driver. First we split
- the file into two seperate files, one 4xx_uart.c with the 405/440 UART
- handling code and the other one iop480_uart.c with the UART code for the
- PLX-Tech IOP480 PPC (PPC403 based).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 764e7417ee5f6e25b1715720e7d7dd3487109385
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 10:30:38 2007 +0200
- ppc4xx: Correct UART input clock calculation and passing to fdt
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 07:34:34 2007 +0200
- ppc4xx: Add initial AMCC Makalu 405EX support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fa8aea20456e6f1dba43f46bcc72024dd9499998
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 22 07:33:52 2007 +0200
- ppc4xx: Add freqUART to CPU speed detection
- This value is needed later for the device tree configuration of
- the uart clock.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Oct 21 14:26:29 2007 +0200
- ppc: Small Kilauea cleanup of config file
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 758c037aeead34b49631b8da3a90b1bba14c0410
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Oct 21 08:16:12 2007 +0200
- rtc: Add Xicor/Intersil X1205 RTC support
- This patch adds support for the Xicor/Intersil X1205 RTC used on the
- AMCC Makalu eval board. This driver is basically cloned from the Linux
- driver version (2.6.23).
- This patch also introduces the Linux bcd.h header for the BCD2BIN/
- BIN2BCD conversions. In the future some of the other U-Boot RTC driver
- should be converted to also use this header instead of implementing
- their own local copy of these functions/macros.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Oct 21 08:12:41 2007 +0200
- ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
- This patch moves some common 4xx macros and the PPC405_SYS_INFO/
- PPC440_SYS_INFO structure into the common ppc4xx.h header.
- Lot's of other macros are good candidates to be consolidated this way
- in the future.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 770c7af5800f598d22730d1f4b70f16c9b33512e
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Oct 21 08:05:18 2007 +0200
- ppc4xx: Fix size setup in Kilauea DDR2 init routine
- The size was initilized wrong. Instead of 256MB, the DDR2 controller
- was setup to 512MB. Now the correct values is used.
- This patch also does a little cleanup and adds a comment here.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
- Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
- Date: Thu Oct 18 17:29:04 2007 +0200
- ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
- CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
- number is used to access system registers.
- Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c36c68160333ac5fe41ec3db12a728b7075b3912
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Oct 18 07:42:27 2007 +0200
- ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
- On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
- is the internal SRAM. Since I now ported and tested this endpoint mode
- on Kilauea successfully to map to 0 (SDRAM), I also changed this for
- Katmai.
- Yucca will stay at internal SRAM for now. Not sure if somebody relies on
- this setup.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5cb4af4791f61843432155142b6cfac901f66c10
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Oct 18 07:39:38 2007 +0200
- ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
- This patch adds endpoint support for the AMCC Kilauea eval board. It can
- be tested by connecting a reworked PCIe cable (only 1x lane singles
- connected) to another root-complex.
- In this test setup, a 64MB inbound window is configured at BAR0 which maps
- to 0 on the PLB side. So accessing this BAR0 from the root-complex will
- access the first 64MB of the SDRAM on the PPC side.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 13 16:43:23 2007 +0200
- ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
- This patch adds support for dynamic configuration of PCIe ports for the
- AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
- boards Yucca & Katmai and the 405EX board Kilauea.
- This dynamic configuration is done via the "pcie_mode" environement
- variable. This variable can be set to "EP" or "RP" for endpoint or
- rootpoint mode. Multiple values can be joined via the ":" delimiter.
- Here an example:
- pcie_mode=RP:EP:EP
- This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
- as endpoint.
- Per default Yucca will be configured as:
- pcie_mode=RP:EP:EP
- Per default Katmai will be configured as:
- pcie_mode=RP:RP:REP
- Per default Kilauea will be configured as:
- pcie_mode=RP:RP
- Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Oct 11 11:15:59 2007 +0200
- ppc4xx: Enable device tree support (fdt) on Kilauea per default
- This patch enables the fdt support on the AMCC Kilauea eval board.
- Additionally now EBC ranges fdt fixup is included to support NOR
- FLASH mapping via the Linux physmap_of driver.
- This Kilauea port now support booting arch/ppc and arch/powerpc
- Linux kernels. The default environment "net_nfs" is for arch/ppc
- and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
- support will be removed.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Oct 11 11:11:45 2007 +0200
- ppc4xx: Add additional debug info to 4xx fdt support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 21:28:58 2007 +0200
- ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1941cce71b1ae975602854045061e82f94ecd012
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 17:35:10 2007 +0200
- ppc4xx: Fix small merge problem in 4xx_enet.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 17:11:30 2007 +0200
- ppc4xx: Add initial AMCC Kilauea 405EX support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit dbbd125721aea6645fdb962f36bd41f59e272f9d
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 17:10:59 2007 +0200
- ppc4xx: Add PPC405EX support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 17:09:36 2007 +0200
- ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 17:07:50 2007 +0200
- ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 17:04:57 2007 +0200
- POST: Add 405EX support to 4xx UART POST test
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 15:10:02 2007 +0200
- DTT: Prepare DS1775 driver for use of different I2C addresses
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 19e93b1e16d267220440d827b920fbad8abfa70f
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 14:23:43 2007 +0200
- ppc4xx: 4xx_pcie: Change PCIe status output to match common style
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ff68f66bcb0da847845aa2fac11eba6c25938c99
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 09:22:33 2007 +0200
- ppc4xx: 4xx_pcie: Disable debug output as default
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 09:18:23 2007 +0200
- ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4dbee8a90df613eb517aadbecebd70f168913d30
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Oct 5 07:57:20 2007 +0200
- ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
- 128MB seems to be the smallest possible value for the memory size
- for on PCIe port. With this change now the BAR's of the PCIe cards
- are accessible under U-Boot.
- One big note: This only works for PCIe port 0 & 1. For port 2 this
- currently doesn't work, since the base address is now 0xc0000000
- (0xb0000000 + 2 * 0x08000000), and this is already occupied by
- CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
- to change the base addresses completely and this change would have
- too much impact right now.
- This patch adds debug output to the 4xx pcie driver too.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 3 21:16:32 2007 +0200
- ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 3 15:01:02 2007 +0200
- ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
- These files were introduced with the IBM 405GP but are currently used on all
- 4xx PPC platforms. So the name doesn't match the content anymore. This patch
- renames the files to 4xx_pci.c/h.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 3 14:14:58 2007 +0200
- ppc4xx: Add a comment for 405EX PCIe endpoint configuration
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 3 10:38:09 2007 +0200
- ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
- (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
- the SDR registers of the PCIe ports. This makes the overall design
- clearer, since it removed a lot of switch statements which are not
- needed anymore.
- Also, the functions ppc4xx_init_pcie_rootport() and
- ppc4xx_init_pcie_entport() are merged into a single function
- ppc4xx_init_pcie_port(), since most of the code was duplicated.
- This makes maintainance and porting to other 4xx platforms
- easier.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 026f71106871f31d17d0ea0db9a7547ff92934bc
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 3 07:48:09 2007 +0200
- ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
- This patch is the first patch of a series to make the 440SPe PCIe code
- usable on different 4xx PPC platforms. In preperation for the new 405EX
- which is also equipped with PCIe interfaces.
- (2) This patch renames the functions from 440spe_ to 4xx_ with a
- little additional cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c7c6da23028f146d912514b95aefa3da7cf37699
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 3 07:34:10 2007 +0200
- ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
- This patch is the first patch of a series to make the 440SPe PCIe code
- usable on different 4xx PPC platforms. In preperation for the new 405EX
- which is also equipped with PCIe interfaces.
- (1) This patch renames the files from 440spe_pcie to 4xx_pcie
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Oct 24 01:37:36 2007 +0200
- TQM5200: Call usb_cpu_init() during board init
- usb_cpu_init() configures GPS USB pins, clocks, etc. and
- is required for proper operation of kernel USB subsystem.
- This setup was previously done in the kernel by the fixup
- code which is being removed, thus low level init must be
- done by U-boot now.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit b5af773f8d92677e06f3295b45557c9d0a487c24
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Thu Oct 25 17:51:27 2007 +0800
- Fix the issue of usb_kbd driver missing the scan code of key 'z'.
- The scan code of the key 'z' is 0x1d, which should be handled.
- The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
- controller.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
- Author: Rodolfo Giometti <giometti@enneenne.com>
- Date: Mon Oct 15 11:59:17 2007 +0200
- PXA USB OHCI: "usb stop" implementation.
- Some USB keys need to be switched off before loading the kernel
- otherwise they can remain in an undefined status which prevents them
- to be correctly recognized by the kernel.
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 31548249decf18a6b877a18436b6139dd483fe4a
- Author: Justin Flammia <jflammia@savantav.com>
- Date: Mon Oct 29 17:40:35 2007 -0400
- DHCP Client Fix
- This is a multi-part message in MIME format.
- commit e6e505eae94ed721e123e177489291fc4544b7b8
- Author: Justin Flammia <jflammia@savantav.com>
- Date: Mon Oct 29 17:19:03 2007 -0400
- Found a bug in the way the DHCP Request packet is built, where the IP address
- that is offered by the server is bound to prematurely. This patch is a fix of
- that bug where the IP address offered by the DHCP server is not used until
- after the DHCP ACK from the server is received.
- Signed-off-by: Justin Flammia <jflammia@savantav.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Oct 25 17:16:22 2007 -0500
- ColdFire 54455: Fix correct boot location for atmel and intel
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Oct 25 17:14:00 2007 -0500
- ColdFire: Fix build error when CONFIG_WATCHDOG is defined
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit c67e12e705b204cfe914e3e3e693d69a445dcabf
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Oct 25 17:12:36 2007 -0500
- ColdFire 5329: Assign correct SDRAM size and fix cache
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Oct 25 17:10:23 2007 -0500
- ColdFire 5253: Assign correct SDRAM size
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 2acefa72ee0026f862ab65597ca687428f63a973
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Oct 25 17:09:17 2007 -0500
- ColdFire 5282: Fix external flash boot and return dramsize
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Oct 25 17:20:01 2007 +0200
- TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Oct 24 08:42:25 2007 +0200
- TQM5200: fix spurious characters on second serial interface
- With this patch PSC3 is configured as UART. This is done, because if
- the pins of PSC3 are not configured at all (-> all pins are GPI),
- due to crosstalk, spurious characters may be send over the RX232_2_TXD
- signal line.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit be4a87f11e297a5cededbf7dd71c0248f3874acd
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Oct 24 08:41:27 2007 +0200
- TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
- Some commands for the STK52xx base board try to access the SM501 grafic
- controller. But the TQM5200S has no grafic controller (only the TQM5200
- and the TQM5200B have). This patch deactivates the commands accessing
- the SM501 for the TQM5200S.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit b31f64343ead9482cd439b1adbe4c34026a641b1
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Oct 22 16:45:53 2007 +0200
- TQM5200: fix spurious characters on second serial interface
- With this patch PSC3 is configured as UART. This is done, because if
- the pins of PSC3 are not configured at all (-> all pins are GPI),
- due to crosstalk, spurious characters may be send over the RX232_2_TXD
- signal line.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Oct 22 16:40:06 2007 +0200
- TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
- Some commands for the STK52xx base board try to access the SM501 grafic
- controller. But the TQM5200S has no grafic controller (only the TQM5200
- and the TQM5200B have). This patch deactivates the commands accessing
- the SM501 for the TQM5200S.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sun Oct 21 09:14:28 2007 +0200
- Mips: Fix string functions differ prototype declaration
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Oct 19 17:51:40 2007 -0500
- fsl_pci_init enable COMMAND_MEMORY if inbound window
- Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
- to pciauto_setup_device has the side effect of not getting
- COMMAND_MEMORY set.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit e9d0d527992566ebef9826962ff1745b2f082b92
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Oct 19 10:55:24 2007 +0200
- delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Oct 19 08:10:15 2007 +0200
- fix warning: no return statement in function returning non-void
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit e78220f6e514206757acfe247297fc9a328a881f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Oct 19 06:33:45 2007 +0200
- xsengine: Fix no partition type specified, use DOS as default
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Oct 19 00:24:59 2007 +0200
- lubbock: Fix no partition type specified, use DOS as default
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Oct 23 16:50:03 2007 +0200
- Coding style: keep lists sorted; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 58b74b05c621e2835ecf4e2d3243042cf4186777
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Oct 19 00:09:05 2007 +0200
- Fix missing drivers makefile entries ds1722.c mw_eeprom.c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 96455bfebc9887837095c9051d216f53c61b5f10
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Fri Oct 19 00:07:39 2007 +0200
- Fix warning differ in signedness in board/innokom/innokom.c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
- Author: Marcel Ziswiler <marcel@ziswiler.com>
- Date: Fri Oct 19 00:25:33 2007 +0200
- fix pxa255_idp board
- The pxa255_idp being an old unmaintained board showed several issues:
- 1. CONFIG_INIT_CRITICAL was still defined.
- 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
- 3. Symbol flash_addr was undeclared.
- 4. The boards lowlevel_init function was still called memsetup.
- 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
- 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
- 'target CPU does not support interworking' warnings on recent compilers.
- 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
- indexes rather than the register definitions from the pxa-regs header
- file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
- avoid any ambiguities.
- 8. There were several redefinition warnings concerning ICMR, OSMR3,
- OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
- 9. The board configuration file was rather outdated.
- 10. The part header file defined the vendor, product and revision arrays
- as unsigned chars instead of just chars in the block_dev_desc_t
- structure.
- Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
- commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
- Author: Rune Torgersen <runet@innovsys.com>
- Date: Wed Oct 17 11:56:31 2007 -0500
- Make MPC8266ADS command selection more robust
- Fix MPC8266 command line definition so it won't break when new commands
- are added to u-boot.
- Signed-off-by Rune Torgersen <runet@innovsys.com>
- commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Oct 23 13:14:10 2007 +0200
- Motion-PRO: Update configuration to accomodate next generation board.
- New board has faster oscillator and a different Flash chip. This affects:
- - CFG_MPC5XXX_CLKIN
- - SDRAM timings
- - Flash CS configuration (timings)
- - Flash sector size, and thus MTD partition layout
- - malloc() arena size (due to bigger Flash sectors)
- - smaller memory test range (due to bigger malloc() arena)
- This patch also enables more extensive memory testing via "mtest".
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit eff501904df2bf1724a750062628ba2c51dbb1f8
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Oct 23 11:36:07 2007 +0200
- Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
- Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
- register must be written a value of 0x00000004 as the first step of the
- SDRAM contorller configuration.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Oct 23 10:22:16 2007 +0100
- Move PL01* serial drivers to drivers/serial and adjust Makefiles.
- commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 23 10:17:42 2007 +0200
- ppc4xx: lwmon5: Some further GPIO config changes
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Sun Oct 21 22:10:10 2007 +0900
- [MIPS] Fix UNCACHED_SDRAM
- PHYSADDR is for physical address, KSEG1ADDR is for uncached.
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 00101dd7a32d12f698150123e47e4b3420279f86
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Sun Oct 21 21:30:42 2007 +0900
- [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit eb700636db017d310edaeb559b13d82588560674
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Sun Oct 21 10:55:37 2007 +0900
- [MIPS] u-boot.lds: Define _gp in a standard manner
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Sun Oct 21 10:55:36 2007 +0900
- [MIPS] Fix $gp usage
- Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
- As a general principle, we should use _gp for $gp.
- Thanks to linker script's help we fortunately have _gp which equals to
- _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
- be able to access to GOT entires, global variables and procedure entry
- points. The right thing to do is to use _gp.
- This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
- which holds the offset from _gp. When updating GOT entries, we use this
- offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
- This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
- I made some change to leave over num_got_entries.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Cc: Vlad Lungu <vlad@comsys.ro>
- commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Sun Oct 21 10:55:36 2007 +0900
- [MIPS] u-boot.lds: Fix __got_start and __got_end
- Ensure that __got_start points to top of the `.got', and __got_end points
- to bottom as well, so that we never fail to count num_got_entries.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Sun Oct 21 10:55:36 2007 +0900
- [MIPS] u-boot.lds: Remove duplicated .sdata section
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Oct 21 01:01:17 2007 +0200
- Minor coding style cleanup; update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
- Author: Vlad Lungu <vlad@comsys.ro>
- Date: Thu Oct 4 20:47:10 2007 +0300
- Fix NE2000 driver:
- Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
- to do anything in eth_stop() if eth_init() was not called.
- Simplified RX path in order to avoid timeouts on really really
- fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
- clever enough to cope with 1 packet per eth_rx().
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- commit df90968b48fb34fa9072fab150db2ac89678f537
- Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
- Date: Mon Sep 24 13:32:13 2007 -0400
- Setting MSR[DE] in do_reset
- Hello,
- This patch ensures the soft reset of the board for the 85xx boards
- by setting the MSR[DE] in the do_reset function.
- Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
- commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
- Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
- Date: Mon Sep 24 13:36:01 2007 -0400
- MSR overwrite fix
- Hello,
- This patch fixes the MSR overwrite in the start.S when moving out of
- the last 4K page.
- Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
- commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
- Author: Dan Wilson <dwilson@fulcrummicro.com>
- Date: Fri Oct 19 11:33:48 2007 -0500
- tsec driver should clear RHALT on startup
- This was causing problems for some people.
- Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
- Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Oct 11 00:29:18 2007 -0500
- Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
- On the MPC85xx CDS we have two issues:
- 1. The device tree fixup code did not check to see if the property we are
- trying to update is actually found. Its possible that it would update
- random memory starting at 0.
- 2. Newer Linux kernel's have moved the location of the PCI nodes to be
- sibilings of the soc node and not children. The explicit PATH to the PCI
- node would not be found for these device trees. Add the ability to handle
- both paths. In the future we shouldn't handle such fixups by explicit path.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit a3063eec775719b7e91023bbec3f64b3118791df
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Oct 11 00:18:48 2007 -0500
- Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
- On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
- console. Make it so we match that config what we tell Linux as the early
- STDOUT console.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit e1ce3cb617bb06f91f82f98915391175addf3e82
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Oct 2 11:12:27 2007 -0500
- Remove magic numbers from cache related operations for mpc85xx
- The mpc85xx start code uses some magic numbers that we actually
- have #defines for in <config.h> so use those instead.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Oct 19 16:47:26 2007 +0200
- Fix two typos.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 281df457c1aa50d2752165d0c5c3282d4027b974
- Author: Tony Li <tony.li@freescale.com>
- Date: Thu Oct 18 17:47:19 2007 +0800
- mpc83xx: Add configure entry for MPC83xx ATM support
- Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
- Makfile and MAKEALL
- Signed-off-by: Tony Li <tony.li@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit d2646554f529a9577515eceb0ec5eceee18244ba
- Author: Tony Li <tony.li@freescale.com>
- Date: Thu Oct 18 17:44:38 2007 +0800
- mpc83xx: pq-mds-pib.c typo error
- Correct to val8 from val.
- Signed-off-by: Tony Li <tony.li@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 3e11ae80fec1ee12194940955431186abf6009c2
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Oct 17 15:40:19 2007 +0200
- ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 16 15:27:43 2007 -0500
- Initial mpc8610hpcd Makefile files.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 16 15:26:51 2007 -0500
- Initial mpc8610hpcd cpu/, README and include/ files.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 16 13:54:01 2007 -0500
- Initial mpc8610hpcd board files.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
- Author: runet@innovsys.com <runet@innovsys.com>
- Date: Tue Oct 16 14:50:40 2007 -0500
- Make MPC8266ADS board compile again.
- Signed-off-by: Runet Torgersen <runet@innovsys.com>
- commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Aug 27 12:41:03 2007 -0500
- 86xx: Allow for fewer DDR slots per memory controller.
- As a direct correlation exists between DDR DIMM slots
- and SPD EEPROM addresses used to configure them, use
- the individually defined SPD_EEPROM_ADDRESS* values to
- determine if a DDR DIMM slot should have its SPD
- configuration read or not.
- Effectively, this now allows for 1 or 2 DIMM slots
- per memory controller.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4d4a945e189a2f384c66432316da2788a0ac1607
- Author: Rodolfo Giometti <giometti@enneenne.com>
- Date: Mon Oct 15 11:59:17 2007 +0200
- PXA USB OHCI: "usb stop" implementation.
- Some USB keys need to be switched off before loading the kernel
- otherwise they can remain in an undefined status which prevents them
- to be correctly recognized by the kernel.
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit e2e93442e558cf1500e92861f99713b2f045ea22
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 15 11:39:00 2007 +0200
- ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
- The I2C bootstrap values that can be setup via the "bootstrap" command,
- were setup incorrect regarding the generation of the internal sync PCI
- clock. The values for PLB clock == 133MHz were slighly incorrect and the
- values for PLB clock == 166MHz were totally incorrect. This could
- lead to a hangup upon booting while PCI configuration scan.
- This patch fixes this issue and configures valid PCI divisor values
- for the sync PCI clock, with respect to the provided external async
- PCI frequency.
- Here the values of the formula in the chapter 14.2 "PCI clocking"
- from the 440EPx users manual:
- AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
- 33MHz async PCI frequency:
- PLB = 133:
- => 32 <= 44.3 <= 65 (div = 3)
- PLB = 166:
- => 32 <= 55.3 <= 65 (div = 3)
- 66MHz async PCI frequency:
- PLB = 133:
- => 65 <= 66.5 <= 132 (div = 2)
- PLB = 166:
- => 65 <= 83 <= 132 (div = 2)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Oct 15 11:29:33 2007 +0200
- ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
- The BCSR status bit for the 66MHz PCI operation was correctly
- addressed (MSB/LSB problem). Now the correct currently setup
- PCI frequency is displayed upon bootup.
- This patch also fixes this problem on Rainier & Yellowstone, since these
- boards use the same souce code as Sequoia & Yosemite do.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Sep 26 17:55:56 2007 +0200
- TQM860M: adjust for doubled flash sector size.
- Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
- doubled sector size.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
- Author: Jens Gehrlein <jens.gehrlein@tqs.de>
- Date: Wed Sep 26 17:55:54 2007 +0200
- TQM8xx: Fix CAN timing.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit d43e489baf02afae49077791fb22332d240d8656
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Thu Sep 27 14:54:36 2007 +0200
- TQM866M: fix SDRAM refresh
- At 133 MHz the current SDRAM refresh rate is too fast
- (measured 4 * 1.17 us).
- CFG_MAMR_PTA changes from 39 to 97. This result
- in a refresh rate of 4 * 7.8 us at the default clock
- 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
- This is a compromise until a new method is found to
- adjust the refresh rate.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 9ef57bbee1c67cc01da2026c242c4692db32be36
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Wed Sep 26 17:55:55 2007 +0200
- TQM866M: adjust for doubled flash sector size.
- Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
- doubled sector size.
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Oct 14 16:12:29 2007 +0200
- [FIX] XUPV2P change command handling
- and remove code violation
- commit 636400198228d96983c06657b17f760f5989958e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Oct 14 00:13:19 2007 +0200
- Prepare for 1.3.0-rc3 release
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Sat Sep 29 13:41:37 2007 +0200
- Fix warning differ in signedness in cpu/pxa/mmc.c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit fc19e36f741e8bc727c0a330170b3b5db90399ef
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Oct 13 23:51:14 2007 +0200
- Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Oct 13 21:15:39 2007 +0200
- Coding Style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e1893815b0999410d7a327589611c7b38e95299e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Oct 12 15:49:39 2007 +0200
- GP3 SSA: enable RTC
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8002012041f1ff9f997a5727abe5015f70cd2e46
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Tue Oct 9 13:58:24 2007 +0200
- [ads5121] EEPROM support added.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Oct 6 18:55:35 2007 +0200
- AVR32: Initialize bi_flash* in board_init_r
- The ATSTK1000-specific flash driver intializes bi_flashstart,
- bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
- driver, don't.
- Initialize these in board_init_r instead so that things will still be
- set up correctly when we switch to the CFI driver.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Fri Oct 5 10:40:54 2007 +0200
- tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit 92869195ef8210758d2176230c0a36897afd50ed
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Oct 5 09:46:06 2007 +0200
- CM5200: Fix missing null-termination in hostname manipulation code
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Tue Oct 2 19:09:01 2007 +0200
- Fix memtest breakage
- CFG_MEMTEST_START uses weird magic involving gd, which fails to
- compile. Use hardcoded values instead (we actually know how much RAM
- we have on board.)
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 2 11:44:46 2007 +0200
- ppc4xx: Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 2 11:44:19 2007 +0200
- ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Mon Oct 1 09:51:50 2007 +0200
- Program EPLD to force full duplex mode for PHY.
- EPLD forces modes of PHY operation. By default full duplex is turned off.
- This fix turns it on.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
- Author: Timo Ketola <timo.ketola@exertus.fi>
- Date: Mon Sep 24 14:50:32 2007 +0300
- Bugfix: Use only one PTD for one endpoint
- Original isp116x-hcd code prepared multiple PTDs for longer than 16
- byte transfers for one endpoint. That is unnecessary because the
- ISP116x is able to split long data from one PTD into multiple
- transactions based on the buffer size of the endpoint. It also caused
- serious problems if the endpoint NAKed some of the transactions. In
- that case ISP116x wouldn't notice that the other PTDs were for the same
- endpoint and would try the other PTDs possibly out of order. That would
- break the whole transfer.
- This patch makes isp116x_submit_job to use one PTD for one transfer.
- Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 86ec86c04326c3913178a7679aa910de071da75d
- Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Date: Thu Sep 27 23:27:47 2007 +0200
- Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Sep 11 14:12:55 2007 +0200
- ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Sep 26 16:35:54 2007 -0500
- 85xx io out functions need sync after write.
- This fixes the mc146818 rtc_read/write functions for 85xx.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Sep 25 15:48:05 2007 -0600
- Fpga: fix incorrect test of CFG_FPGA_XILINX macro
- CFG_FPGA_XILINX is a bit value used to test against the value in
- CONFIG_FPGA. Testing for a value will always return TRUE. I don't
- think that is the intention in this code.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:41:30 2007 +0200
- [FIX] change command handling and removing code violation
- commit f240356507038e5ce55e8a24cb2607e9eae6d10c
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:36:06 2007 +0200
- [FIX] change sets of commands
- because changing of command handling brings
- compilation problems
- commit cb1bc63b75a232571eb69aa2c8aa919321655845
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:30:42 2007 +0200
- [FIX] Email reparation & Copyright
- Both codes are written by myself without any
- support from CTU
- commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:25:11 2007 +0200
- [PATCH] Change macro name for UartLite
- because PowerPC 405 can use UartLite as console
- commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:21:19 2007 +0200
- [PATCH] Add support for design without interrupt controller
- Polling timer
- commit 0731933ec8ec45d02ba89b52df673d526873cdde
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:19:48 2007 +0200
- [FIX] resolve problem with cpu without barrel shifter
- commit db14d77995ce515b728b178b63f82babe60e3d56
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:18:46 2007 +0200
- [FIX] repair email address
- commit 481d4328618804add1f818a6c96296121cd0528e
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:17:42 2007 +0200
- [FIX] repair MFSL commands
- commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Sep 24 00:08:37 2007 +0200
- synchronizition with mainline
- commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Sep 23 02:42:38 2007 +0900
- sh: Add support command of ide with sh
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Sep 23 02:38:42 2007 +0900
- sh: Update Makefile
- Add support MS7722SE01 to Makefile.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Sep 23 02:31:13 2007 +0900
- sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Sep 23 02:19:24 2007 +0900
- sh: Update MS7750SE01 platform
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 516ad760db3553766267ada01b7d5d727faa4bbd
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Sep 23 02:17:08 2007 +0900
- sh: Remove comment out code from include/asm-sh/cpu_sh4.h
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit b02bad128669e567fce87d8df823b06a0144b8db
- Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Date: Sun Sep 23 02:12:30 2007 +0900
- sh: Update core code of SuperH.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Sep 20 00:04:14 2007 +0200
- v1.3.0-rc2
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 135e19bc2773ebca487e9a8371f67e1ba202313a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 18 21:36:35 2007 +0200
- Avoid compiler warning.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8a783a65851bc7421ab69f442261215e21b8891a
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Sep 18 12:24:57 2007 -0600
- Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
- /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
- nulls in a string differently. For example, the following statement:
- echo "this is a string\0" > afile
- Will produce the following with /bin/bash:
- "this is a string\0"
- But with /bin/dash, will produce:
- "this is a string
- Bug fixed by moving the embedded null out of the makefile and into the
- config header. Also renamed the macro to avoid usage colision with the same
- macro used by other board ports.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Sep 18 17:40:27 2007 +0200
- MCC200: fix build warning
- The MCC200 board config file includes version.h for some customer-
- specific setting, which causes warnings with "make depend"; build
- version.h before depend.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit bd86220f58b99d6896198c385fda132f0c980915
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Sep 18 13:07:54 2007 +0100
- Move coloured led API to status_led.h
- Improve indentation in drivers/at45.c
- commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
- Author: Eirik Aanonsen <eaa@wprmedical.com>
- Date: Tue Sep 18 08:47:20 2007 +0200
- Update atstk1002 bootargs.
- Updates to atstk1002 U-Boot header file:
- - Changed bootargs:
- * Set the bootargs for at1002 to point to the SD-card partition instead
- * ... of the boot flash.
- * Removing the rootfstype since that argument are not needed.
- Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
- Author: Eirik Aanonsen <eaa@wprmedical.com>
- Date: Wed Sep 12 13:32:37 2007 +0200
- Add some comments to clocks in atstk1002.h
- This patch applies some clarifying comments to how the different
- clocks are setup according to atstk1002.h Some of the previous
- comments where stating wrongful information.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 97213f32416ead885deafea86774e912ffd60ad0
- Author: David Saada <David.Saada@ecitele.com>
- Date: Mon Sep 17 17:04:47 2007 +0200
- Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
- Signed-off-by: David Saada <david.saada@ecitele.com>
- commit 30363e98fa470fbecea5e8bc0f1443352754f303
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Sep 17 08:20:47 2007 +0200
- Small whitespace cleanup of OneNAND patch
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Sep 10 17:15:14 2007 +0900
- OneNAND support (take #2)
- [PATCH 3/3] OneNAND support (take #2)
- OneNAND support at U-Boot
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 17aa2800457df0c06b41516f46f126712c196219
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Sep 10 17:14:34 2007 +0900
- OneNAND support (take #2)
- [PATCH 2/3] OneNAND support (take #2)
- OneNAND support at U-Boot
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Sep 10 17:13:49 2007 +0900
- OneNAND support (take #2)
- [PATCH 1/3] OneNAND support (take #2)
- OneNAND support at U-Boot
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Sep 16 20:51:57 2007 +0200
- [FIX] remove files form repository
- commit 67c31036acaaaa992fc346cc89db0909a7e733c4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Sep 16 17:10:04 2007 +0200
- TQM8xx[LM]: Fix broken environment alignment.
- With recent toolchains, the environment sectors were no longer aligned to
- sector boundaries. The reason was a combination of two bugs:
- 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
- for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
- this gets defined, is not included here (and cannot be included
- without causing lots of problems).
- Added a new #define CFG_USE_PPCENV for all boards which really
- want to put the environment is a ".ppcenv" section.
- 2) The linker scripts just include environment.o, silently assuming
- that the objects in that file are really in the order in which
- they are coded in the C file, i. e. "environment" first, then
- "redundand_environment", and "env_size" last. However, current
- toolchains (GCC-4.x) reorder the objects, causing the environment
- data not to start on a flash sector boundary:
- Instead of: we got:
- 40008000 T environment 40008000 T env_size
- 4000c000 T redundand_environment 40008004 T redundand_environment
- 40010000 T env_size 4000c004 T environment
- Note: this patch fixes just the first part, and cures the alignment
- problem by making sure that "env_size" gets placed correctly. However,
- we still have a potential issue because primary and redundant
- environment sectors are actually swapped, i. e. we have now:
- 40008000 T redundand_environment
- 4000c000 T environment
- 40010000 T env_size
- This shall be fixed in the next version.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit eb6da8050797c204c9d010548424186c7ce32fc1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Sep 16 02:39:35 2007 +0200
- TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cd2d1602c54cc6957bdef3872272a4b264893960
- Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
- Date: Mon Sep 10 14:54:56 2007 -0400
- Typo fix in tsec.c
- Fixup for the break statement in wrong place.
- [Patch by urwithsughosh@gmail.com]
- Acked-by: Andy Fleming <afleming@freescale.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Sep 11 17:04:00 2007 +0200
- Fix do_div() usage in nand process output
- Fix usage of do_div() in nand erase|read|write process output.
- The last patch to nand_util.c introduced do_div() instead of libgcc's
- implementation. But do_div() returns the quotient in its first
- macro parameter and not as result.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit c750d2e6692a000a82f29de7bf24e3dc21239161
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Sep 12 12:36:53 2007 +0200
- NAND: Add CFG_NAND_QUIET option
- This config option sets the default for the progress information
- output behavior that can also be configured through the 'quiet'
- environment variable.
- The legacy NAND code does not print the current progress info
- on the console. So this option is for backward compatibility for
- units that are in the field and where setting the quiet variable
- is not an option. With CFG_NAND_QUIET set to '1' the console
- progress info is turned off. This can still be overwritten
- through the environment variable.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit dcb88630290d2bcd803386dd4c2be73142994c4f
- Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
- Date: Thu Sep 13 16:06:05 2007 -0700
- ColdFire: fix build error becasue of bad type of mii_init()
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
- Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
- Date: Thu Sep 13 16:04:05 2007 -0700
- ColdFire: Fix build error caused by pixis.c
- Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit e21659e30660a1377c42af135a6114efe39801d9
- Author: Sam Sparks <SSparks@twacs.com>
- Date: Fri Sep 14 11:14:42 2007 -0600
- Update MPC8349ITX*_config to place config.tmp in right place.
- MPC834ITX*_config does not store config.tmp at the correct locatation,
- causing MPC8349ITXGP to have the wrong TEXT_BASE.
- Signed-off-by: Sam Sparks <SSparks@twacs.com>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 1218abf1b5817a39a82399b4b928b00750575bda
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Sep 15 20:48:41 2007 +0200
- Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 66b3f24d665be678a9dbb125b1e84185400f63b5
- Author: Dirk Behme <dirk.behme@googlemail.com>
- Date: Sat Sep 15 11:55:42 2007 +0200
- Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
- As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
- function local.
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
- commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Sep 15 00:03:35 2007 +0200
- Synchronize with U-BOOT mainline
- commit d7fee32b7e61fe11c64e371cde79faa4768e8350
- Author: Sam Sparks <SSparks@twacs.com>
- Date: Fri Sep 14 11:14:42 2007 -0600
- Update MPC8349ITX*_config to place config.tmp in right place.
- MPC834ITX*_config does not store config.tmp at the correct locatation,
- causing MPC8349ITXGP to have the wrong TEXT_BASE.
- Signed-off-by: Sam Sparks <SSparks@twacs.com>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Sep 13 18:21:48 2007 +0200
- cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Sep 13 16:33:59 2007 +0200
- tqm5200: Restore customary env. variable boot commands for powerpc kernels
- - update default definitions of kernel_addr and fdt_addr env. variables
- - make arch/powerpc booting the default scenario
- - update MTD partition layout to match the above
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit f34024d4a328e6edd906456da98d2c537155c4f7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Sep 12 00:48:57 2007 +0200
- Fix memory corruption problem on STX GP3 SSA Board.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Sep 11 15:35:01 2007 +0100
- Final tidy
- commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Tue Sep 11 15:42:11 2007 +0200
- [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
- scan on second pci bus.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Tue Sep 11 12:57:52 2007 +0200
- [ppc4xx] Individual handling of sdram.c for bamboo_nand build
- Bamboo has a file sdram.c which needs special treatment when building in
- separate directory. It has to be linked to build directory otherwise it is
- not seen.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit d45963854eff39d575124d859419bb4953ce2c87
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue Sep 11 00:37:04 2007 +0200
- [FIX] Microblaze ML401 - repare FLASH handling
- commit 38c1ef728d19950414a8ab1ccfc53767848fa346
- Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
- Date: Mon Sep 10 16:55:59 2007 +0100
- Allocate CPU Architecture Code for STMicroelectronics' ST200.
- Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
- ---------------------------------------------------
- commit 754bac48156f8958d8f6a53a51eda88ab5758929
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Sep 10 20:42:31 2007 +0200
- Update version to match current state.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Mon Sep 10 17:39:08 2007 +0200
- [MPC512x] Streamline frame handling in the FEC driver
- - convert frame size settings to be derived from a single base
- - set frame size to the recommended default value
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
- Author: Kyungmin Park <kmpark@infradead.org>
- Date: Mon Sep 10 11:34:00 2007 +0900
- Remove compiler warning: target CPU does not support interworking
- Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
- commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Sep 9 21:21:33 2007 +0200
- Fix compile error in spc1920 config.
- Signed-off-by: Markus Klotzbücher <mk@denx.de>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Fri Sep 7 09:25:07 2007 -0600
- Bugfix: make bootm+libfdt compile on boards with no flash
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Fri Sep 7 18:35:37 2007 +0200
- [PPC440SPe] PCIe environment settings for Katmai and Yucca
- - 'pciconfighost' is set by default in order to be able to scan bridges
- behind the primary host/PCIe
- - 'pciscandelay' env variable is recognized to allow for user-controlled
- delay before the PCIe bus enumeration; some peripheral devices require a
- significant delay before they can be scanned (e.g. LSI8408E); without the
- delay they are not detected
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 7f1913938984ef6c6a46cb53e003719196d9c5de
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Fri Sep 7 18:20:23 2007 +0200
- [PPC440SPe] Improve PCIe configuration space access
- - correct configuration space mapping
- - correct bus numbering
- - better access to config space
- Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
- first device on the first bus. We now allow to configure up to 16 buses;
- also, scanning for devices behind the PCIe-PCIe bridge is supported, so
- peripheral devices farther in hierarchy can be identified.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Fri Sep 7 17:46:18 2007 +0200
- [PPC440SPe] Convert machine check exceptions handling
- Convert using fixup mechanism to suppressing MCK for the duration of config
- read/write transaction: while fixups work fine with the case of a precise
- exception, we identified a major drawback with this approach when there's
- an imprecise case. In this scenario there is the following race condition:
- the fixup is (by design) set to catch the instruction following the one
- actually causing the exception; if an interrupt (e.g. decrementer) happens
- between those two instructions, the ISR code is executed before the fixup
- handler the machine check is no longer protected by the fixup handler as it
- appears as within the ISR code. In consequence the fixup approach is being
- phased out and replaced with explicit suppressing of MCK during a PCIe
- config read/write cycle.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit ff7640c9ead8806b5d827f2b29f9cb2632add729
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Sep 7 17:43:36 2007 +0200
- Fix typo in MAKEALL script.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Fri Sep 7 17:09:21 2007 +0200
- [MPC512x] Proper handling of larger frames in the FEC driver
- When frame larger than local RX buffer is received, it is split and handled
- by two buffer descriptors. Prior to this patch the FEC driver discarded
- contents of a buffer descriptor without the 'LAST' bit set, so the first
- part of the frame was lost in case of larger frames. This fix allows to
- safely combine the two pieces into the whole frame.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Fri Sep 7 17:05:36 2007 +0200
- [MPC512x] Correct fixup relocation
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit a89cbbd27a60e6740772000fd0688ffba1c2576a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Sep 7 01:21:25 2007 +0200
- Update CHANGELOG, minor coding style cleanup.
- commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
- Author: stefano babic <sbabic@denx.de>
- Date: Thu Aug 30 23:01:49 2007 +0200
- PXA270: Added support for TrizepsIV board.
- This patch add support for the Trizeps IV module (520Mhz).
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
- Author: stefano babic <sbabic@denx.de>
- Date: Thu Aug 30 22:57:04 2007 +0200
- PXA270: Add support for multiple serial ports.
- This patch adds support for multiple serial ports to the PXA target.
- FFUART, BTUART and STUART are supported.
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
- Author: stefano babic <sbabic@denx.de>
- Date: Thu Aug 30 22:48:47 2007 +0200
- PXA270: fix compile issue (invalid lvalue)
- Code is broken for PXA270 due to "invalid lvalue in assignment".
- This patch fix it in pxa-regs.h
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Thu Aug 30 18:19:05 2007 +0800
- Add BUILD_DIR support for bios emulator.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit b4d8a55145442f136982634862341a3e02002bda
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Fri Aug 31 14:41:51 2007 +0900
- [MIPS] Remove inline asm string functions
- Stop using inline string functions on MIPS as other ARCHs do so,
- since the optimized inline asm versions are not small.
- This change is triggered by a following MIPS build error:
- common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
- common/exports.c:32: undefined reference to `strcmp'
- make: *** [u-boot] Error 1
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Fri Aug 31 14:41:45 2007 +0900
- [MIPS] Update asm string header
- This patches contains several bugfixes and cleanups in the latest upstream:
- - Don't include linux/config.h
- - Remove buggy inline version of memscan.
- - Merge with Linux 2.6.11-rc3.
- - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
- - Goodbye mips64. 31704 lines of code bite the dust.
- - Replace extern inline with static inline.
- - Fix return value of strncpy.
- - Remove a bunch more "$1" clobbers.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Sep 4 17:31:22 2007 +0200
- Fix do_bootm_linux() so that multi-file images with FDT blob boot.
- Fix incorrect blob address calculation in do_bootm_linux() that prevents
- booting the kernel from a multi-file image (kernel + initrd + blob).
- Also, make minor updates to the U-Boot's output and to the coding style.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 041a2554ad619e80dce520c1a33210affcb6a3f2
- Author: Gary Jennejohn <gary.jennejohn@freenet.de>
- Date: Fri Aug 31 14:29:04 2007 +0200
- Add support for Sil680 IDE controller.
- o add drivers/sil680.c to support the Sil680 IDE-controller.
- o drivers/Makefile: add sil680.o.
- Signed-off-by: Gary Jennejohn <garyj@denx.de>
- commit e79021223bc339df655e360645a52c457a74b067
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Sep 6 09:47:40 2007 -0600
- bootm/fdt: Only process the fdt if an fdt address was provided
- Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
- kernels using the board info structure (instead of passing a device tree)
- This change allows the old style booting to be used if the fdt argument
- was not passed to 'bootm'.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
- commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Sep 6 09:46:23 2007 -0600
- Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
- Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
- Tested on: lite5200b
- Note: the fixup functions have not been moved to a common place. This
- patch is targeted for immediate merging as in solves a build issue, but
- the final name/location of the fixups is still subject to debate. I
- propose to merge this now, and move the fixups in the next merge window
- to be usable by all targets.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 41bb76e941929f54a73206fb132f7a4c275543a3
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Thu Sep 6 09:46:17 2007 -0600
- libfdt: add convenience function fdt_find_and_setprop()
- Given the path to a node, fdt_find_and_setprop() allows a property value
- to be set directly.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 80767a6cead9990d9e77e62be947843c2c72f469
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed Sep 5 16:04:41 2007 +0100
- Changed API name to coloured_led.h
- Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
- Tidied other cpu/arm920t/start.S code
- commit 56a9270521baaa00e12639a978302a67f61ef060
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Aug 30 16:18:18 2007 -0500
- Fix ULI RTC support on MPC8544 DS
- The RTC on the M1575 ULI chipset requires a dummy read before
- we are able to talk to the RTC. We accomplish this by adding a
- second memory region to the PHB the ULI is on and read from it.
- The second region is added to maintain compatiabilty with Linux's
- view of the PCI memory map.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Thu Aug 30 01:58:48 2007 -0500
- ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
- pcie is now differentiated from pci. Add 8641 bus-range updates.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Sep 4 16:18:38 2007 +0100
- Add coloured led interface for ARM boards.
- Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
- commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Sep 4 14:49:28 2007 +0100
- Move include/led.h to board/at91rm9200dk
- commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Sep 4 14:25:51 2007 +0100
- Ran Lindent on drivers/at45.c
- commit 557ab89d294f08dd532f21d19861b40093200a33
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Sep 4 14:23:50 2007 +0100
- Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
- commit 81b73dec16fd1227369a191e725e10044a9d56b8
- Author: Gary Jennejohn <garyj@denx.de>
- Date: Fri Aug 31 15:21:46 2007 +0200
- ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
- The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
- set to non-zero, because it doesn't support MRM (memory-read-
- multiple) correctly. We now added the possibility to configure
- this register in the board config file, so that the default value
- of 8 can be overridden.
- Here the details of this patch:
- o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
- board-specific settings. As an example the sequoia board requires 0.
- Idea from Stefan Roese <sr@denx.de>.
- o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
- PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
- o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
- CFG_PCI_CACHE_LINE_SIZE to 0.
- Signed-off-by: Gary Jennejohn <garyj@denx.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 60174746c668b309378a91488dded898e9553eae
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Aug 31 10:01:51 2007 +0200
- Fix TFTP OACK code for short packets.
- The old code had a loop limit overflow bug which caused a semi-
- infinite loop for small packets, because in "i<len-8", "i" was signed,
- but "len" was unsigned, and "len-8" became a huge number for small
- values of "len".
- This is a workaround which replaces broken commit 8f1bc284.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
- Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- Date: Thu Aug 30 15:03:05 2007 +0200
- Reduce BOOTDELAY variable to 1 second by default for STK1002
- Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
- Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- Date: Thu Aug 30 15:03:04 2007 +0200
- Remove double quotation marks around MAC address for STK1002
- Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit ff13ac8c7bbebb238e339592de765c546dba1073
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Aug 30 14:42:15 2007 +0200
- Backout commit 8f1bc284 as it causes TFTP to fail.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Thu Aug 30 02:26:17 2007 -0500
- Revert "Fix MPC8544DS PCIe3 scsi."
- This reverts commit 9468e680.
- Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Wed Aug 29 18:26:24 2007 -0600
- tftp: don't implicity trust the format of recevied packets
- The TFTP OACK code trusts that the incoming packet is formated as
- ASCII text and can be processed by string functions. It also has a
- loop limit overflow bug where if the packet length is less than 8, it
- ends up looping over *all* of memory to find the 'blksize' string.
- This patch solves the problem by forcing the packet to be null
- terminated and using strstr() to search for the sub string.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Aug 29 16:31:18 2007 +0200
- ppc4xx: Change lwmon5 default environment to support Linux RTC
- The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
- to supply the RTC I2C address as bootline parameter. This patch
- adds support for this rtc probing parameter to the bootargs:
- "rtc-pcf8563.probe=0,0x51"
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 29 09:06:05 2007 -0500
- sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
- this had slipped through the cracks, since the sbc board was added
- after I wrote the original patch to remove all these symbols, and
- before it was merged.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Aug 29 14:05:30 2007 +0200
- Add mii_init() prototype
- to get rid of a *lot* of compiler warnings.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Aug 29 13:35:03 2007 +0200
- Disable network support on cmi_mpc5xx board
- ..because it caused compiler errors and there seems to be no
- board maintainer to take care of this.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Mon Aug 20 09:44:00 2007 -0500
- Fix MPC8544DS PCIe3 scsi.
- <ed.swarthout@freescale.com>
- The problem is pciauto_setup_device() getting called from fsl_pci_init.c
- is allocating memory space it doesn't need.
- Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Tue Aug 21 09:38:59 2007 -0500
- 8548cds fixes
- Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
- correct consoledev needed for linux boot.
- Standardize on fdt{file,addr} var to hold dtb file name.
- Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Thu Aug 23 15:20:54 2007 -0400
- Enable L2 cache for MPC8568MDS board
- The L2 cache size is 512KB for 8568, print out the correct informaiton.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Wed Aug 22 17:54:49 2007 +0800
- Remove the bios emulator binary files from MAI board
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Aug 21 17:00:17 2007 -0500
- support board vendor-common makefiles
- if a board/$(VENDOR)/common/Makefile exists, build it.
- also add the first such case, board/freescale/common/Makefile, to
- handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
- dictated by board configuration.
- thusly get rid of alternate build dir errors such as:
- FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
- by putting the common/ mkdir command in its proper place (the common
- Makefile). Common bits from existing individual board Makefiles have
- been removed.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
- Author: stefano babic <sbabic@denx.de>
- Date: Tue Aug 21 15:52:33 2007 +0200
- Fix: TFTP is not working on little endian systems
- TFTP does not work anymore after multicast tftp
- patch was applied on little endian systems.
- This patch fix it.
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 5f470948570526e9186f053a3003da7719604e90
- Author: stefano babic <sbabic@denx.de>
- Date: Tue Aug 21 15:50:33 2007 +0200
- Fix MAC address setting in DM9000 driver.
- The logic to check if there is a correct MAC address in the DM9000
- EEPROM, added in the last patch, is wrong. Now the MAC address is
- always taken from the environment, even if a suitable MAC is present
- in the EEPROM.
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Tue Aug 21 12:40:34 2007 +0200
- MPC5xxx: fix some compiler warnings in USB code
- Fix the following warnings:
- - usb.c:xx: warning: function declaration isn't a prototype
- - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
- from pointer wihtout a cast
- Signed-off-by: Martin Krause <martin.krase@tqs.de>
- commit 16e23c3f5dab6937f5109365416808c7f15c122b
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Mon Aug 20 23:55:33 2007 -0500
- fsl_pci_init - Remove self PCSRBAR allocation
- CPU physical address space was being wasted by allocating a
- PCSRBAR PCI inbound region to it's memory space.
- As a rule, PCSRBAR should be left alone since it does not affect
- transactions from self and other masters may have changed it.
- Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
- commit 0e700ce03a23bb1921149bc77008ace7103d5289
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Mon Aug 20 13:56:47 2007 +0200
- Fix compiler warning in include/s3c2410.h
- This patch fixes the "type qualifiers ignored on fuction return tpye"
- warning for include/s3c2410.h
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
- Author: Dirk Behme <dirk.behme@googlemail.com>
- Date: Mon Aug 20 07:09:05 2007 +0200
- Fix compilation error for omap2420h4_config.
- omap2420h4 switched to cfi, so remove old (already disabled) flash.c
- and flash_probe() calls in env_flash.c.
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Aug 10 14:34:14 2007 -0500
- fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
- and make some minor corrections to the FDT part of the README.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Aug 29 01:32:05 2007 +0200
- Minor coding style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Tue Aug 28 17:40:33 2007 +0200
- [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit f98984cb194bb34dbe1db9429d3b51133af30d07
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Tue Aug 28 17:39:14 2007 +0200
- IDE: - make ide_inb () and ide_outb () "weak", so boards can
- define there own I/O functions.
- (Needed for the pcs440ep board).
- - The default I/O Functions are again 8 Bit accesses.
- - Added CONFIG_CMD_IDE for the pcs440ep Board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
- Author: Semih Hazar <semih.hazar@indefia.com>
- Date: Mon Aug 20 19:00:01 2007 +0300
- AVR32: Change prototype of memset
- Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 9c02defc29b57945b600714cf61ddfd02b02fb14
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Sat Aug 25 05:07:16 2007 +0200
- POST: limit memory test area to not touch global data anymore
- As experienced on lwmon5, on some boards the POST memory test can
- corrupt the global data buffer (bd). This patch fixes this issue
- by checking and limiting this area.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 75e1a84d483e36be10e206e539b028c4889e1158
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 24 15:41:42 2007 +0200
- ppc4xx: Add RTC POST test to lwmon5 board configuration
- Since this RTC POST test is taking quite a while to complete
- it's only initiated upon special keypress same as the complete
- memory POST.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d7bfa620037a6d2210159387571bdf93aa32c162
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 24 15:19:10 2007 +0200
- ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 23 11:02:37 2007 +0200
- ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
- This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
- board. Now the "eeprom" command can be used to read/write from/to this
- device. Additionally a new command was added "eepromwp" to en-/disable
- the write-protect of this 2nd EEPROM.
- The 1st EEPROM is not affected by this write-protect command.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c64fb30e4c5976007d56fc1789c7a0666082b536
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Aug 22 08:56:09 2007 +0200
- ppc4xx: Remove unused option CFG_INIT_RAM_OCM
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 21 16:27:57 2007 +0200
- ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
- This patch adds support for the matrix keyboard on the lwmon5 board.
- Since the implementation in the dsPCI is kind of compatible with the
- "old" lwmon board, most of the code is copied from the lwmon
- board directory.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 19 10:27:34 2007 +0200
- Fix some build errors.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Aug 18 22:00:38 2007 +0200
- Update CHANGELOG.
- commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Aug 16 22:52:39 2007 -0500
- lib_ppc: make board_add_ram_info weak
- platforms wishing to display RAM diagnostics in addition to size,
- can do so, on one line, in their own board_add_ram_info()
- implementation.
- this consequently eliminates CONFIG_ADD_RAM_INFO.
- Thanks to Stefan for the hint.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
- Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Date: Fri Aug 17 12:43:44 2007 +0900
- PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
- This patch has been sent on:
- - 6 Jun 2007
- Many users of PCI config read routines tend to ignore the function
- ret value, and are only concerned about the contents of *val. Based
- on this, pci_hose_read_config_{byte,word}_via_dword should initialize
- the *val on dword read error.
- Without this fix, for example, we'll go on scanning bus with vendor or
- header_type uninitialized. This brings many unnecessary config trials.
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Aug 18 14:37:52 2007 +0200
- ColdFire: Fix some remaining problems with CFG_CMD_
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8280f6a1c43247616b68224675188e5ccd124650
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Aug 18 14:33:02 2007 +0200
- Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Aug 16 19:23:50 2007 -0500
- ColdFire: Add M5235EVB Platform for MCF523x
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Aug 17 09:30:00 2007 -0500
- mpc83xx: fix typo in DDR2 programming
- introduced in the implement board_add_ram_info patch as I was cleaning out the
- magic numbers. sorry.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e58fe95784d2514fc9c21028dc59f2b319a35d80
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Aug 16 22:53:09 2007 -0500
- mpc83xx: move freescale boards to boards/freescale
- includes build fixes.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Aug 16 22:52:59 2007 -0500
- mpc83xx: suppress unused variable 'val8' warning
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit bbea46f76f767b919070b4829bf34c86bd223248
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Aug 16 22:52:48 2007 -0500
- mpc83xx: implement board_add_ram_info
- add board_add_ram_info, to make memory diagnostic output more
- consistent. u-boot banner output now looks like:
- DRAM: 256 MB (DDR1, 64-bit, ECC on)
- and for boards with SDRAM on the local bus, a line such as this is
- added:
- SDRAM: 64 MB (local bus)
- also replaced some magic numbers with their equivalent define names.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 14778585d1389d86d5846efec29e5fce892680ce
- Author: Tony Li <tony.li@freescale.com>
- Date: Fri Aug 17 10:35:59 2007 +0800
- mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
- The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
- And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
- Signed-off-by Tony Li <tony.li@freescale.com>
- commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Aug 16 15:05:11 2007 -0500
- ColdFire: Add M54455EVB for MCF5445x
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Aug 16 13:20:50 2007 -0500
- ColdFire: Add M5253EVBE platform for MCF52x2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit a605aacd8324094199402816cc6d9124aba57b8d
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Aug 16 05:04:31 2007 -0500
- ColdFire: Add M5249EVB platform for MCF52x2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 20:32:06 2007 -0500
- ColdFire: Update Freescale MCF52x2 platforms
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:55:10 2007 -0500
- ColdFire: Update EB+MCF-EV123 platform
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:46:38 2007 -0500
- ColdFire: update TASREG platform for MCF52x2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:45:51 2007 -0500
- ColdFire: update r5200 platform for MCF52x2
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:43:20 2007 -0500
- ColdFire: idmr platform MCF52x2 update
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:41:06 2007 -0500
- ColdFire: cobra5272 platform for MCF52x2 update
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 56115665b4a64c10c01440c57749b265e0908fa4
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:38:15 2007 -0500
- ColdFire: MCF52x2 Header files update
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 19:21:21 2007 -0500
- ColdFire: MCF52x2 update
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 18:46:11 2007 -0500
- ColdFire: MCF5329 update cache
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 7171977fb8fd77cfb6676953fa9a05789c450513
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 15:40:20 2007 -0500
- ColdFire: MCF5329 header file clean up
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Wed Aug 15 15:39:17 2007 -0500
- ColdFire: MCF5329 Update and cleanup
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 10327dc5541f947c0cf7e31fef86c4706169607a
- Author: Andy Fleming <afleming@freescale.com>
- Date: Thu Aug 16 16:35:02 2007 -0500
- Add CONFIG_HAS_ETH0 to all boards with TSEC
- The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
- to update TSEC1's device-tree node, so we need to add it
- to all the boards with TSECs. Do this for 83xx and 86xx, too,
- since they will eventually do something similar.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Aug 16 15:05:04 2007 -0500
- Update MPC8544 DS PCI memory map
- The PCIe bus that the ULI M1575 is connected to has no possible way of
- needing more than the fixed amount of IO & Memory space needed by the ULI.
- So make it use far less IO & memory space and have it use the shared LAW. This
- free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
- by each bus.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ea5877e31ed63ade948fd1293895ec23fe01472e
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Thu Aug 16 11:01:21 2007 -0500
- Fix up some fdt issues on 8544DS
- It looks like we had a merge issue that duplicated a bit of code
- in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
- the MAC address properly set in the device tree on boot for TSEC1
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Thu Aug 16 15:16:03 2007 +0200
- PPC4xx:HCU4/5 cleanup
- Minor cleanups to confirm to the u-boot coding style.
- Some german expressions -> english.
- HCU5 enforces a unique IP adress for a given slot in the rack.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Thu Aug 16 15:16:02 2007 +0200
- PPC4xx:HCU4/5 cleanup ecc/sdram init
- Make ecc initialisation robust, as DDR2-ECC errors may be generated
- while zeroing the RAM.
- Return 16 bytes (a cacheline) less than the available memory, as the
- board and/or PPC440EPx might have problems accessing the last bytes.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit d35b508a55508535b6e8445b718585d27df733d3
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:29:56 2007 -0500
- fdt: suppress unused variable 'bd' warning
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 82bd9ee77490588d4da785d75829ca63d0176baf
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Aug 15 20:06:50 2007 -0500
- Fix warnings from of_data copy fix
- Forgot to cast of_flat_tree to ulong.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 7613afda77d5eec0f47d303025b0c661b70e4c73
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Aug 15 20:03:44 2007 -0500
- Don't wait for disconnected TSECs
- The TSEC driver's PHY code waits a long time for autonegotiation to
- complete, even if the link is down. The PHY knows the link is
- down or up before autonegotiation completes, so we can short-circuit
- the process if the link is down.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit b96c83d4ae475a70ef2635cd0e748174c44c8601
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Aug 15 20:03:34 2007 -0500
- Fix numerous bugs in the 8568 UEC support
- Actually, fixed a large bug in the UEC for *all* platforms.
- How did this ever work?
- uec_init() did not follow the spec for eth_init(), and returned
- 0 on success. Switch it to return the link like tsec_init()
- (and 0 on error)
- The immap for the 8568 was defined based on MPC8568, rather than
- CONFIG_MPC8568
- CONFIG_QE was off
- CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
- Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
- enabled
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 3a79013e2adda53332dfd0b511066a805e929a9d
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Aug 15 20:03:25 2007 -0500
- Define tsec flag values in config files
- The tsec_info structure and array has a "flags" field for each
- ethernet controller. This field is the only reason there are
- settings. Switch to defining TSECn_FLAGS for each controller
- in the config header, and we can greatly simplify the array, and
- also simplify the addition of future boards.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit ec7238229507e7f47533a611ea8c53319d234cf3
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Aug 15 20:03:13 2007 -0500
- Add support for building all boards with a TSEC
- Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
- Now we can do a MAKEALL test on all of them!
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Aug 15 17:30:56 2007 -0500
- Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
- The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
- neglected to *also* put the code inside the similar #ifdef
- for CONFIG_OF_FLAT_TREE.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 78f9fef7f406078c8bf7191e665a73f795157746
- Author: Scott Wood <scottwood@freescale.com>
- Date: Wed Aug 15 15:46:46 2007 -0500
- mpc885ads: Don't define CONFIG_BZIP2.
- bzip2 requires a significant chunk of malloc space, and there isn't
- enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
- and a downloaded image at 0x400000.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 002275a3ed8b114885f6702d6d544d0780dfe689
- Author: Michal Simek <Monstr@seznam.cz>
- Date: Thu Aug 16 08:54:10 2007 +0200
- Bios emulator - fix microblaze toolchain problem
- microblaze CPU have problem with bios_emulator code.
- Microblaze toolchain doesn't support PRAGMA PACK.
- Signed-off-by: Michal Simek <monstr@monstr.eu>
- commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Aug 16 11:51:04 2007 +0200
- Minor Coding Style fix; Update CHANGELOG file.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 16 11:21:49 2007 +0200
- ppc4xx: Remove #warning in esd auto_update.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2d78074d2e806edc380c1464eb9e5df335ece65e
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 22 17:32:28 2007 +0200
- ppc7xx: Update CPCI750 board
- This small CPCI750 update extends the board specific command
- "show_config" to display the Marvell strapping registers and
- extends the PCI IDE controller.
- Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
- Author: Michal Simek <monstr@monstr.eu>
- Date: Thu Aug 16 10:46:28 2007 +0200
- [FIX] Changes for bios_emulator code for others architecture
- commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
- Author: Michal Simek <monstr@monstr.eu>
- Date: Thu Aug 16 10:45:09 2007 +0200
- [FIX] Remove unused include file
- commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 16 10:18:33 2007 +0200
- ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 16 09:54:51 2007 +0200
- Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 02ba7022f62bb75908296c58c63866e1d294b69a
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 16 09:52:29 2007 +0200
- ppc4xx: Update Sequoia/Rainier bootstrap command
- As suggested by David Mitchell, here an update for the Sequoia/Rainier
- bootstrap command.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 35cc4e4823668e8745854899cfaedd4489beb0ef
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:30:39 2007 -0500
- mpc83xx: enable libfdt by default on freescale boards
- this enables libfdt code by default for the
- freescale mpc8313erdb, mpc832xemds, mpc8349emds,
- mpc8349itx and gp boards.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 3fde9e8b22cfbd7af489214758f9839a206576cb
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:30:33 2007 -0500
- mpc83xx: migrate remaining freescale boards to libfdt
- this adds libfdt support code for the freescale
- mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
- and gp boards.
- Boards remain compatible with OF_FLAT_TREE.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:30:26 2007 -0500
- mpc83xx: move common /memory node update mechanism to cpu.c
- also adds common prototypes to include/common.h.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:30:19 2007 -0500
- mpc83xx: remaining 8360 libfdt fixes
- PCI clocks and QE frequencies weren't being updated, and the core clock
- was being updated incorrectly. This patch also adds a /memory node if
- it doesn't already exist prior to update.
- plus some cosmetic trimming to single line comments.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:30:12 2007 -0500
- mpc83xx: fix UEC2->1 typo in libfdt setup code
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Aug 15 22:30:05 2007 -0500
- mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
- and reorder the existing 83xx maintainers alpha.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5b4de9309d7a03aa1db2e5391ab696363391f460
- Author: Michal Simek <monstr@monstr.eu>
- Date: Wed Aug 15 21:15:05 2007 +0200
- [FIX] Resolve problem with warnings
- microblaze toolchain don't support PRAGMA PACK.
- commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
- Author: Michal Simek <monstr@monstr.eu>
- Date: Wed Aug 15 21:05:07 2007 +0200
- [FIX] Correction command setting for Microblaze boards
- commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
- Author: Michal Simek <monstr@monstr.eu>
- Date: Wed Aug 15 21:03:41 2007 +0200
- [FIX] Correction command definition
- commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Aug 15 11:55:35 2007 -0500
- 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
- Remove a leftover in net/tftp.c while we're at it.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Aug 15 12:20:40 2007 -0500
- Move the MPC8641HPCN board under board/freescale.
- Minor path corrections needed to ensure buildability.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 8662577fe36fdb6a44b55b998d9daac6392a736a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Aug 15 11:46:22 2007 -0500
- 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
- Remove a leftover in net/tftp.c while we're at it.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 210f463c71917b7a4495c2103c228b9c179ae64d
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Wed Aug 15 11:13:15 2007 -0400
- Fix where the #ifdef CFG_BOOTMAPSZ is placed.
- Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
- interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
- when it should have gone inside of the conditional. As a result, it
- broke non-LIBFDT board builds.
- Also added a missing "not." to the comment.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 0e19209767194a97cec6d93dba9e64d1da8d548e
- Author: Niklaus Giger <niklaus.giger@netstal.com>
- Date: Wed Aug 15 12:14:23 2007 +0200
- PPC4xx:HCU4/5-Board fix compile warning
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Tue Aug 14 14:06:45 2007 -0500
- Fix malloc size error in ahci_init_one.
- Typically this causes scsi init to corrupt the
- devlist and break the coninfo command.
- Fix a compiler size warning.
- Signed-off-by: Jason Jin <jason.jin@freescale.com>
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit b361acd64fd2525c081b9b288b0804efe209c0e9
- Author: ksi@koi8.net <ksi@koi8.net>
- Date: Tue Aug 14 10:02:16 2007 -0700
- TI DaVinci - fix unsupported %hhx format
- Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
- commit f01dbb5424a81453c81190dd30e945891466f621
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 14 18:42:36 2007 +0200
- Coding style cleanup. Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Aug 14 10:32:59 2007 -0500
- Fix initrd/dtb interaction
- The original code would wrongly relocate the blob to be right before
- the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
- if it is defined. So we make two changes:
- 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
- 2) If the blob is being relocated, relocate it before kbd, not initrd
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit e54b970173769307a116bd34028b6d0c2eea2a4e
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Aug 14 15:40:00 2007 +0100
- Supply spi interface in at45.c
- commit 4ce846ec59f36b85d6644a769690ad3feb667575
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 14 15:12:01 2007 +0200
- POST: Fix merge problem
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 14 15:03:17 2007 +0200
- Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 779e975117a75e91fcebe226a63104dbfb924ab1
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 14 14:44:41 2007 +0200
- ppc4xx: Add initial Zeus (PPC405EP) board support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c5a172a5fd636c12467429e3f7910e53773979c6
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 14 14:41:55 2007 +0200
- POST: Add option for external ethernet loopback test
- When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
- is not done using an internal loopback connection, but by assuming
- that an external loopback connector is plugged into the board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit eb2b4010ae426245172988804ee8d9193fb41038
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 14 14:39:44 2007 +0200
- POST: Add ppc405 support to cache and UART POST
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Aug 14 10:46:32 2007 +0100
- Replace lost end of at45.c.
- commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Aug 14 10:30:06 2007 +0100
- Update Makefiles for merged and split at45.c.
- commit 3454cece2db57cb9eb7087995f7e73066a163f71
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Aug 14 10:21:06 2007 +0100
- Delete the merged files.
- commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Aug 14 10:14:05 2007 +0100
- Add the files.
- commit d4fc6012fd0a5c211b825691f44b06f8032c0551
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Aug 14 10:10:52 2007 +0100
- Add MACH_TYPE records for several AT91 boards.
- Merge to two at45.c files into a common file, split to at45.c and spi.c
- Fix spelling error in DM9161 PHY Support.
- Initialize at91rm9200 board (and set LED).
- Add PIO control for at91rm9200dk LEDs and Mux.
- Change dataflash partition boundaries to be compatible with Linux 2.6.
- Signed-off-by: Peter Pearse <peter.pearse@arm.com>
- Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
- commit 4ef35e53c693556c54b0c22d6f873de87bade253
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 14 09:54:46 2007 +0200
- Coding style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 14 09:47:27 2007 +0200
- Coding style cleanup; rebuild CHANGELOG
- commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
- Author: Randy Vinson <rvinson@linuxbox.(none)>
- Date: Tue Feb 27 19:42:22 2007 -0700
- 85xxCDS: Add make targets for legacy systems.
- The PCI ID select values on the Arcadia main board differ depending
- on the version of the hardware. The standard configuration supports
- Rev 3.1. The legacy target supports Rev 2.x.
- Signed-off-by Randy Vinson <rvinson@mvista.com>
- commit e41094c7e38177c755fbd9b182018069614f080d
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Aug 14 01:50:09 2007 -0500
- 85xxCDS: Enable the VIA PCI-to-ISA bridge.
- Author: Randy Vinson <rvinson@linuxbox.(none)>
- Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
- Arcadia main board.
- Signed-off-by: Randy Vinson <rvinson@mvista.com>
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Aug 14 00:14:25 2007 -0500
- Add support for UEC to 8568
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit c59e4091ffe0148398b9e9ff14a019ea038b7432
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Tue Jun 19 14:18:34 2007 -0400
- Add PCI support for MPC8568MDS board
- This patch is against u-boot-mpc85xx.git of www.denx.com
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
- commit d111d6382c99fdea08c2312eeeae8786945e189a
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Tue Jun 19 14:18:32 2007 -0400
- Empirically set cpo and clk_adjust for mpc85xx DDR2 support
- This patch is against u-boot-mpc85xx.git of www.denx.com
- Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
- both MPC8548CDS board and MPC8568MDS board, especially for supporting
- 533MHz DDR2.
- Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
- DDR2 on all current board versions especially ver 1.92 or later to bring
- up.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit 3db0bef59eab1155801618cef5c481e97553b597
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Aug 7 18:07:27 2007 -0500
- Use an absolute address when jumping out of 4k boot page
- On e500 when we leave the 4k boot page we should use an absolute address since
- we don't know where the board code may want us to be really running at.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Aug 13 14:49:59 2007 -0500
- MPC85xx BA bits not set for 3-bit bank address DIMM
- The current implementation does not set the number of bank address bits
- (BA) in the processor. The default assumes 2 logical bank bits. This
- works fine for a DIMM that uses devices with 4 internal banks (SPD
- byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
- devices with 8 internal banks (SPD byte17 = 0x8).
- Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
- commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Aug 13 14:38:06 2007 -0500
- Fix minor 85xx warnings
- Some patches had inserted warnings into the build:
- * mpc8560ads declared data without using it
- * cpu_init declared ecm and immap without using it in all CONFIGs
- * MPC8548CDS.h had its default filenames changed so that they contained
- "\m" in the paths. Made the defaults not Windows-specific (or
- anything-specific)
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit f2cff6b104f82b993bef6086ce0c97159bbe1add
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:52 2007 -0500
- 8548cds PCIE support.
- Make the early L1 cache stack region guarded to prevent speculative
- fetches outside the locked range.
- Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
- init.S whitespace cleanup.
- Allow TEXT_BASE value to be specified on command line. This allows it
- to be set to 0xfffc0000 which cuts the uboot binary in half.
- Clear and enable lbc and ecm errors.
- Update last_busno in device-tree for pci and pcie.
- Remove load of obsolete cpu/mpc85xx/pci.0
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:51 2007 -0500
- 8544ds PCIE support
- PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
- Enable LBC and ECM errors and clear error registers.
- Add tftpflash env var to get uboot from tftp server and flash it.
- Add pci/pcie convenience env vars to display register space:
- "run pcie3regs" to see all pcie3 ccsr registers
- "run pcie3cfg" to see all cfg registers
- Whitespace cleanup and MPC8544DS.h
- Enable CONFIG_INTERRUPTS.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Aug 14 01:34:21 2007 -0500
- 85xx start.S cleanup and exception support
- From: Ed Swarthout <Ed.Swarthout@freescale.com>
- Support external interrupts from platform to eliminate system hangs.
- Define CONFIG_INTERRUPTS board configure option to enable.
- Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
- Remove extra cpu initialization redundant with hardware initialization.
- Whitespace cleanup.
- Define and use _START_OFFSET consistent with other processors using
- ppc_asm.tmpl
- Move additional code from .text to boot page to make room for
- exception vectors at start of image.
- Handle Machine Check, External and Critical exceptions.
- Fix e500 machine check error determination in traps.c
- TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Aug 14 01:33:18 2007 -0500
- Add MPC8544DS README
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:48 2007 -0500
- 85xx allow debugger to configure ddr.
- Only check for mpc8548 rev 1 when compiled for 8548.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:47 2007 -0500
- mpc85xx L2 cache reporting and SRAM relocation option.
- Allow debugger to override flash cs0/cs1 settings to enable alternate
- boot regions
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:46 2007 -0500
- e500 needs ppc_asm.tmp MCK_EXCEPTION
- Always define MCK_EXCEPTION macro - so e500 can use it too.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 53a5c424bf8655b7b4e2c305a441963259a26a81
- Author: David Updegraff <dave@cray.com>
- Date: Mon Jun 11 10:41:07 2007 -0500
- multicast tftp: RFC2090
- Implemented IETF RFC2090, Multicast TFTP. Initial implementation
- on Realtek RTL8139 and Freescale TSEC.
- Signed-off-by: David Updegraff <dave@cray.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
- Author: Wilson Callan <wcallan@savantav.com>
- Date: Sat Jul 28 10:56:13 2007 -0400
- New CONFIG_BOOTP_SERVERIP option
- Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
- from the bootp server
- Signed-off-by: Wilson Callan <wcallan@savantav.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
- Author: Mike Rapoport <mike@compulab.co.il>
- Date: Sun Aug 12 08:48:27 2007 +0300
- Add ability to take MAC address from the environment to DM9000 driver
- Signed-off-by: Mike Rapoport <mike@compulab.co.il>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit be5d72d10d47609326226225181e301fb9a33b58
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 13 21:57:53 2007 +0200
- Minor coding style cleanup. Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Sat Aug 11 06:54:58 2007 -0500
- Modify SBC8641D to use new Freescale PCI routines
- PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
- adapter.
- Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Signde-off-by: Jon Loeliger <jdl@freescale.com>
- commit a08458303e7f9db67f296980036d3292c35cb45c
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Jun 29 18:38:51 2007 +0200
- atmel_mci: Fix data timeout value
- Calculate the data timeout based on values from the CSD instead of
- just using a hardcoded DTOR value. This is a backport of a similar fix
- in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
- instead of down.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Aug 13 17:22:31 2007 +0200
- AVR32: Include <div64.h> instead of <asm/div64.h>
- include/asm-avr32/div64.h was recently moved to include/div64.h, but
- cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
- the patch was merged perhaps?)
- This patch updates cpu/at32ap/interrupts.c so that the avr32 port
- compiles again.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed Jun 27 13:34:26 2007 +0200
- atmel_mci: Use 512 byte blocksize if possible
- Instead of always using the largest blocksize the card supports, check
- if it can support smaller block sizes and use 512 bytes if possible.
- Most cards do support this, and other parts of u-boot seem to have
- trouble with block sizes different from 512 bytes.
- Also enable underrun/overrun protection.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
- commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Aug 13 09:05:33 2007 +0200
- ppc4xx: Fix problem in PLL clock calculation
- This patch was originall provided by David Mitchell <dmitchell@amcc.com>
- and fixes a bug in the PLL clock calculation.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 21:34:50 2007 +0200
- Update CHANGELOG
- commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 21:34:34 2007 +0200
- Minor alignment of output, 2nd try.
- Also update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6b309f22a724fad8418e811751a0741b893419cf
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 20:35:49 2007 +0200
- Minor alignment of output
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 18:28:18 2007 +0200
- Cleanup output on ADS5121 board
- Signed-off-by: Wolfgang Denk
- commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 15:11:38 2007 +0200
- Adapt board configuration and fix kernel crash on MCC200 board.
- The update procedure was modified to turn off the USB subsystem
- before exit for MCC200 and TRAB. This is necessary as otherwise the
- USB controller continues to write periodically to system memory!
- MCC200-specific notes:
- - the patch disables the magic key check for MCC200
- - the patch contains the configuration changes made
- for the new revision of the board.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 14:47:54 2007 +0200
- Adjust default configuration of ADS5121 board.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sun Aug 12 14:27:39 2007 +0200
- Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5fe6be6208dda852c3564e384bd78d75784dea3e
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue Aug 7 21:14:22 2007 -0400
- Improve error print messages.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jul 17 13:57:04 2007 -0500
- fdt: allow for builds that don't want env and bd_t nodes
- protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
- area.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 91148bf7aeba142d6f348805db7625db7da64d6f
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jul 17 13:56:53 2007 -0500
- fdt: do board setup based on fdt address specified on bootm line
- The last fdt patch to bootm did board setup based on the address
- specified by a prior fdt address command invocation. The bootm
- code, as its call to fdt_chosen does, should use the fdt specified
- by the user on the bootm command. Note this restores full
- functionality for the 8360's existing default boot environment
- values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
- before booting a kernel).
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e125a2ffc209dd34794e326c7175658253beadf3
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue Jul 10 20:40:39 2007 -0400
- Call ft_board_setup() from the bootm command.
- In the patch titled "Create new fdt boardsetup command..." I removed the
- call to ft_board_setup() from the routine fdt_chosen(), but I forgot
- to add a direct call back into cmd_bootm.c
- This fixes the oversight by adding the direct call to the bootm command.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Mon Jun 25 23:25:28 2007 -0400
- Create new fdt boardsetup command, fix bug parsing [] form of set values.
- Previously ft_board_setup() was called by fdt_chosen() which was not
- really correctly structured. This splits ft_board_setup() out by creating
- a new fdt boardsetup command.
- Fix a bug when parsing fdt set command values which have the square
- bracket form [00 11 22 33] - the length was updated incorrectly in when
- parsing that form.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 6f35ded9e85493595e0eb66a82b502a95326d049
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Mon Jun 25 20:55:58 2007 -0400
- Tighten up the error messages.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit c45874b05aae897a6c29d1a97d4bb708fca2756c
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Mon Jun 25 19:52:23 2007 -0400
- Asthetic improvements: error messages and line lengths.
- Tighten up the error messages, split overlength lines.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Fri May 25 22:08:57 2007 -0400
- Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
- The fdt_chosen() function was adding/seting some properties ad-hoc
- improperly and duplicated (poorly) what was done in ft_board_setup()
- Clean up long lines (setting properties, printing errors).
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 06e19a07701c968f15d72c083b5872a1a11c7b01
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Mon May 21 23:27:16 2007 -0400
- For fdt_find_node_by_path(), handle the root path properly.
- Also removes the special case root path detection in cmd_fdt.c since it
- is no longer necessary.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Thu May 17 23:54:36 2007 -0400
- Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 1a861169bc3758f9de3aead62b058736c6891246
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Wed Jun 6 22:47:58 2007 -0400
- Replace fdt_node_offset() with fdt_find_node_by_path().
- The new name matches more closely the kernel's name, which is also
- a much better description.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Wed May 16 22:39:59 2007 -0400
- Fix cmd_fdt line lengths, refactor code.
- Break lines that were greater than 80 characters in length.
- Move the fdt print and property parsing code to separate static functions
- to reduce coding clutter in the fdt_cmd handling body.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 25114033ab21788810c48ba4df103b649da1223b
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat May 12 09:47:25 2007 -0400
- FDT command improvements.
- Fix "fdt set" so that it will create a non-existing property.
- Add "fdt mknode" to create nodes.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 38eb508e8e811e2e57628f445de3a24a23c7d804
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat May 12 09:45:46 2007 -0400
- Reorganize and fix problems (returns) in the bootm command.
- Do *NOT* return after the "point of no return" has been passed.
- If something goes wrong, the board must be reset after that point.
- Move the "Transferring control to Linux" debug message back to where it
- belongs: just before transferring control to linux.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 89c8757d8f213c47709bdc4efe0695263a6080a6
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Tue May 8 21:27:35 2007 -0400
- Fix bugs in the CONFIG_OF_LIBFDT
- Stupid coding mistakes (identified by Timur Tabi, thanks).
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Wed Apr 25 22:47:15 2007 -0400
- Improve fdt move length handling.
- Make the length parameter optional: if not specified, do the move using
- the current size unchanged.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Wed Apr 25 22:23:36 2007 -0400
- Minor code clean up.
- Declare the variable fdt properly as extern.
- Call the "set_fn" function pointer the "short way" without the full
- dereferencing syntax.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Wed Apr 25 21:24:27 2007 -0400
- Improve error messages, more informative.
- Print more than the raw libfdt error message strings. This is especially
- useful for cluing in the user when the bootm command aborts due to
- blob problems.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Fri Apr 20 22:46:53 2007 -0400
- libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
- This is the way u-boot reduces configured-out code. At Wolfgang
- Grandegger and Wolfgang Denk's request, make libfdt conform.
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- commit 923efd286411ed052d9e074f59f8986d6081061c
- Author: Bruce Adler <bruce.adler@ccpu.com>
- Date: Fri Aug 10 14:54:47 2007 -0700
- add image size and descriptors for Spartan 3E FPGA chips
- Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
- Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
- commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Aug 10 15:34:48 2007 -0500
- make MAKEALL more immune to merge conflicts
- ..by placing board entries one per line, as suggested by jdl.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Fri Aug 10 13:28:25 2007 -0500
- README: Remove outdated cpu type, board type, and NAME_config lists
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 49bb59912d21aacb507eb81fd21fb7af650c706c
- Author: Dave Liu <r63238@freescale.com>
- Date: Fri Aug 10 15:48:59 2007 +0800
- mpc83xx: Suppress the warning 'burstlen'
- suppress the warning 'burstlen' of spd_sdram.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit c646bba6465a45c60746d4cc1602cd06c1960f2d
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Thu Aug 9 15:11:03 2007 -0500
- Add support for SBC8641D. Config files.
- Add support for Wind River's SBC8641D reference board.
- Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Acked-by: Wolfgang Denk <wd@denx.de>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 8ac273271d57321f90505c7a51cdb1ef2113b628
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Thu Aug 9 15:10:53 2007 -0500
- Add support for SBC8641D. Board files.
- Add support for Wind River's SBC8641D reference board.
- Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Acked-by: Wolfgang Denk <wd@denx.de>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit c2c0ab4aff86622b837a48a0e560351f9afafb95
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 10 20:34:58 2007 +0200
- Conding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
- Author: Sergey Kubushyn <ksi@koi8.net>
- Date: Fri Aug 10 20:26:18 2007 +0200
- [ARM] TI DaVinci support, hopefully final
- Add support for the following DaVinci boards:
- - DV_EVM
- - SCHMOOGIE
- - SONATA
- Changes:
- - Split into separate board directories
- - Removed changes to MTD_DEBUG (or whatever it's called)
- - New CONFIG_CMD party line followed
- - Some cosmetic fixes, cleanup etc.
- - Patches against the latest U-Boot tree as of now.
- - Fixed CONFIG_CMD_NET in net files.
- - Fixed CONFIG_CMD_EEPROM for schmoogie.
- - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
- DV_EVM. Can't check if it works on SONATA, don't have a board any more,
- but it at least compiles.
- Here is an excerpt from session log on SCHMOOGIE...
- U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
- DRAM: 128 MB
- NAND: 128 MiB
- In: serial
- Out: serial
- Err: serial
- ARM Clock : 297MHz
- DDR Clock : 162MHz
- ETH PHY : DP83848 @ 0x01
- U-Boot > iprobe
- Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
- U-Boot > ping 192.168.253.10
- host 192.168.253.10 is alive
- U-Boot >
- Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
- Acked-by: Dirk Behme <dirk.behme@gmail.com>
- Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:45 2007 -0500
- fsl_pci_init cleanup.
- Do not enable normal errors created during probe (master abort, perr,
- and pcie Invalid Configuration access).
- Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Fri Jul 27 01:50:44 2007 -0500
- pciauto_setup_device bars_num fix
- Passing bars_num=0 to pciauto_setup_device should assign no bars.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Aug 6 17:39:44 2007 -0500
- 8641hpcn: Do correct sized pointer math.
- When I rebased Ed's patch and cleaned up a few compilation
- problems, I apparently rebased my brain on crack first.
- Fix that by doing (char *) sized pointer math as needed.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit cfc7a7f5bb3273c9951173c788001d45118f141f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Aug 2 14:42:20 2007 -0500
- cpu/86xx fixes.
- Remove rev 1 fixes.
- Always set PICGCR_MODE.
- Enable machine check and provide board config option
- to set and handle SoC error interrupts.
- Include MSSSR0 in error message.
- Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 10 10:42:25 2007 +0200
- Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
- Author: Dirk Behme <dirk.behme@googlemail.com>
- Date: Thu Aug 2 17:42:08 2007 +0200
- Make use of generic 64bit division in nand_util.c
- Use generic 64bit division in nand_util.c. This makes nand_util.c
- independent of any toolchain 64bit division.
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit f7c086e94e8ce9aad7268af97f73aa6884686f27
- Author: Dirk Behme <dirk.behme@googlemail.com>
- Date: Thu Aug 2 17:41:14 2007 +0200
- Move 64bit division from avr32 to generic lib
- Move the 64bit division from lib_avr32 to lib_generic. With this, all
- boards can do_div/__div64_32 if needed, not only avr one. Code is put
- to lib_generic, so no larger memory footprint if not used. No code
- modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
- Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
- commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:31:22 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:30:33 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit e8397fc78c9394d71de233a4d810fbc9047e4c76
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:38:26 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: common files
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:28:44 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: make related
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 137fdd9f474ecb853efdace5200576308c67f18d
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:28:03 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:27:15 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:25:31 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: READMEs
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Fri Jul 27 11:37:40 2007 +0200
- Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
- This series of patches adds support for 2 boards from Netstal Maschinen.
- The HCU4 has a PPC405Gpr and
- the HCU5 has a PPC440EPX.
- The HCU4 has a somehow complicated flash setup, as the booteprom is
- only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
- elegant solution.
- The HCU5 has only a booteprom as the whole code will be downloaded from a
- different board which has HD, CD-ROM, etc and where all code is stored.
- This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
- Thanks them a lot.
- Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
- commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Aug 10 08:42:55 2007 +0200
- ppc4xx: Update lwmon5 POST configuration
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
- Author: Yuri Tikhonov <yur@emcraft.com>
- Date: Fri Aug 10 08:25:22 2007 +0200
- POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
- The patch adds support for UART POST on ppc44x-based boards with no
- external serial clocks installed.
- Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Aug 6 18:18:34 2007 -0500
- mpc83xx: fix ITX[GP] O=builddir builds
- make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
- Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
- "BUILD_DIR=<some dir> ./MAKEALL ..."
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Aug 1 15:00:59 2007 +0800
- mpc83xx: Correct the README for DDR ECC
- Update the README for DDR ECC, change the name
- to README.mpc83xx.ddrecc.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Aug 1 15:00:15 2007 +0800
- mpc83xx: Consolidate the ECC support of 83xx
- Remove the duplicated source code of ecc command on the <board>.c,
- for reused, move these code to cpu/mpc83xx directory.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 036575c544cf1b69654d8fb334bda69c6ff3da36
- Author: Dave Liu <r63238@freescale.com>
- Date: Sat Aug 4 13:37:39 2007 +0800
- mpc83xx: Correct the burst length for DDR2 with 32 bits
- The burst length should be 4 for DDR2 with 32 bits bus
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jul 25 19:25:33 2007 -0500
- mpc83xx: add support for the MPC8323E RDB
- MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
- five 10/100 ethernet ports connected via an ICPlus IP175C
- switch, one PCI slot, and serial. Features not supported
- in this patch are SD card interface, 2 USB ports, and the
- two phone ports.
- Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jul 25 19:25:28 2007 -0500
- mpc83xx: fixup generic pci for libfdt
- add libfdt support to the generic 83xx pci code
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit f57ac7a7b37109245b69db80839ebee26179966a
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jul 25 19:25:22 2007 -0500
- mpc83xx: fix 8360 and cpu functions to update fdt being passed
- ..and not the global fdt. Rename local fdt vars to blob so as not to
- be confused with the global var with the same three-letter name.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Wed Jul 4 21:34:24 2007 -0400
- mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
- Several node strings were not correct (trailing slashes and properties
- in the strings)
- Added setting of the timebase-frequency.
- Improved error messages and use debug() instead of printf().
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 26d02c9bbac1751c5e19294f000100b48d43a920
- Author: Jerry Van Baren <gvb.uboot@gmail.com>
- Date: Wed Jul 4 21:27:30 2007 -0400
- mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
- The new name matches more closely the kernel's name, which is also
- a much better description.
- These are the mpc83xx changes made necessary by the function name change.
- Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
- Acked-by: Gerald Van Baren <vanbaren@cideas.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 9be39a67c9f8fef7107f5df09d673005f04d0963
- Author: Dave Liu <daveliu@freescale.com>
- Date: Mon Jun 25 10:41:56 2007 +0800
- mpc83xx: Add support for the display of reset status
- 83xx processor family has many reset sources, such as
- power on reset, software hard reset, software soft reset,
- JTAG, bus monitor, software watchdog, check stop reset,
- external hard reset, external software reset.
- sometimes, to figure out the fault of system, we need to
- know the cause of reset early before the prompt of
- u-boot present.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
- Author: Dave Liu <daveliu@freescale.com>
- Date: Mon Jun 25 10:41:04 2007 +0800
- mpc83xx: Fix the align bug of SDMA buffer
- According to the latest user manual, the SDMA temporary
- buffer base address must be 4KB aligned.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
- Author: Dave Liu <daveliu@freescale.com>
- Date: Mon Jun 25 13:21:12 2007 +0800
- mpc83xx: Revise the MPC8360EMDS readme doc
- When the rev2.x silicon mount on the MPC8360EMDS baord,
- and if you are using the u-boot version after the commit
- 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
- to make the ethernet interface usable, we have to setup
- the jumpers correctly.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Jul 3 13:46:32 2007 -0500
- FSL I2C driver programs the two I2C busses differently
- The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
- The second I2C bus has its slave address programmed incorrectly and is
- missing a 5-us delay.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Jul 3 13:04:34 2007 -0500
- Update SCCR programming in cpu_init_f() to support all 83xx processors
- Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
- bitfields for all 83xx processors. The code to update some bitfields was
- compiled only on some processors. Now, the bitfields are programmed as long
- as the corresponding CFG_SCCR option is defined in the board header file.
- This means that the board header file should not define any CFG_SCCR macros
- for bitfields that don't exist on that processor, otherwise the SCCR will be
- programmed incorrectly.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 9546266999f0b9b51372636614211b88d90f0f25
- Author: Martin Krause <martin.krause@tqs.de>
- Date: Fri Jun 22 13:04:22 2007 +0200
- TQM834x: cleanup configuraton
- Remove irritating #undef DEBUG
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
- Author: david.saada <David.Saada@ecitele.com>
- Date: Mon Jun 18 09:09:53 2007 -0700
- MPC83xx: Fix makefile to generate config.h file in the build directory
- MPC83xx: Fix the Makefile config sections to generate the include/config.h
- file in the build directory instead of the source directory.
- Signed-off-by: David Saada <david.saada@ecitele.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
- Author: Lee Nipper <Lee.Nipper@freescale.com>
- Date: Thu Jun 14 20:07:33 2007 -0500
- mpc83xx: Add support for 8360 silicon revision 2.1
- This change adds 8360 silicon revision 2.1 support to u-boot.
- Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Wed Aug 8 04:14:28 2007 -0500
- Treat ppc64 host as ppc
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 0dc4279b08ff82472bec2e2c90858602459febe8
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Wed Aug 8 09:01:46 2007 +0800
- Minor fix for bios emulator makefile
- Add $(obj) to LIB avoiding objects be built in the source dir
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Wed Aug 8 08:33:11 2007 +0800
- Add CONFIG_BIOSEMU define to guard all the bios emulator code
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- This patch fix the compile issue on the board that did not enable the bios emulator
- commit ed8106433522f2ea8933e9808346860d061d7731
- Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
- Date: Tue Jul 31 12:27:25 2007 -0500
- tsec: fix multiple PHY support
- The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
- broke multiple PHY support in tsec.c. This fixes it.
- Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Thu Aug 9 09:08:18 2007 -0500
- tsec: Allow Ten Bit Interface address to be configurable
- Allow the address of the Ten Bit Interface (TBI) to be changed in the
- event of a conflict with another device.
- Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Aug 8 09:54:26 2007 +0200
- Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a41de1f0d373e09c782dea558385a06247111ba5
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 05:15:18 2007 -0500
- Port enabled for I2C signals and chipselects port configuration.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 04:31:18 2007 -0500
- Added NAND support
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 04:11:20 2007 -0500
- Added I2C support
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 99c03c175d2689093176facf17c58ce2cb320001
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 03:58:52 2007 -0500
- Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 03:55:21 2007 -0500
- Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 03:43:30 2007 -0500
- Moved sync() from board file to include/asm-m68k/io.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 03:30:44 2007 -0500
- Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 9998bd37ead85e93953559720710d3b0685c81e6
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Sun Aug 5 03:19:10 2007 -0500
- Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Tue Aug 7 16:17:06 2007 +0800
- Add CONFIG_BIOSEMU define to guard all the bios emulator code
- This patch fix the compile issue on the board that did not enable the bios emulator
- commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Aug 7 16:02:13 2007 +0200
- Fix missing brace error in fs/fat/fat.c
- [pointed out by Roderik Wildenburg]
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 706714d97a0d08d59eda4de2268c39f504688329
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Aug 6 23:41:53 2007 +0200
- [FIX] remove cute code
- commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Aug 6 23:35:26 2007 +0200
- [FIX] Fix romfs code
- commit ab4b956d3143f8f8174089053f5dfabbb04762b0
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Aug 6 23:31:49 2007 +0200
- [FIX] Coding style cleanup - Wolfgang's suggestions
- commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 6 23:21:05 2007 +0200
- Fixed typo in README (pointed out by Martin Jost).
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 537223afa61f64480df31ce440a9cb386df4a814
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Aug 6 21:10:17 2007 +0200
- ppc4xx: Update AMCC Bamboo README doc/README.bamboo
- As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
- here an updated Bamboo README.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 6 02:17:36 2007 +0200
- Coding style cleanup. Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 221838cc7eb178370ff62aa05920a582e12ac322
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Tue Jul 10 09:03:22 2007 +0800
- Remove the bios emulator from MAI board.
- The bios emulator in the MAI board can not pass compile
- and have a lot of crap in it. remove it and will have a
- clean and small bios emulator in the drivers directory
- which can be uesed for every board.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 5618332409bb96f4448d1712899369fc80c0b489
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Jul 13 12:14:59 2007 +0800
- Fix some compile issues for MAI board.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 0f460a1ee148b648ee242c3157650287d4296260
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Jul 13 12:14:58 2007 +0800
- Configurations for ATI video card BIOS emulator
- This patch add definition of the BIOS emulator and the ATI framebuffer
- driver for MPC8641HPCN board.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit ece92f85053b8df613edcf05b26a416cbc3d629c
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Jul 6 08:34:56 2007 +0800
- This is a BIOS emulator, porting from SciTech for u-boot, mainly for
- ATI video card BIOS. and can be used for x86 code emulation by some
- modifications.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 5072188acabde3178fac7f5a597150e6e74fd40c
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Jul 6 08:33:33 2007 +0800
- This is a framebuffer driver for ATI video card, can work for PCI9200,
- X300, X700, X800 ATI video cards.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 5728be389e65fd47f34b33c2596271eb4db751ae
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Aug 6 01:01:49 2007 +0200
- Coding style cleanup. Update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8092fef4c29b395958bb649647da7e3775731517
- Author: Martin Krause <Martin.Krause@tqs.de>
- Date: Tue Dec 12 14:26:01 2006 +0100
- Add functions to list of exported functions
- Additionally export the following fuctions (to make trab_config build again):
- - simple_strtol()
- - strcmp()
- Also bump the ABI version to reflect this change
- Signed-off-by: Martin Krause <martin.krause@tqs.de>
- commit 63cec5814fab5d2b1c86982327433807a5ac0249
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Thu Aug 2 14:09:49 2007 -0500
- Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
- All of the PCI/PCI-Express driver and initialization code that
- was in the MPC8641HPCN port has now been moved into the common
- drivers/fsl_pci_init.c. In a subsequent patch, this will be
- utilized by the 85xx ports as well.
- Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
- Also enable the second PCI-Express controller on 8641
- by getting its BATS and CFG_ setup right.
- Fixed a u16 vendor compiler warning in AHCI driver too.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a274ca4f6d68830e7c916f897561cff8c4101c38
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Aug 5 22:33:05 2007 +0200
- [FIX] Coding style cleanup
- commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Aug 5 16:13:31 2007 +0200
- [FIX] Xilinx Uartlite driver
- Because PPC405 can use UARTLITE serial interface and
- Microblaze can use Uart16550 serial interface not only Uartlite.
- commit 98889edd50aadf862071eb5664747ad0d568a20e
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Aug 5 15:54:53 2007 +0200
- [FIX] Change configuration for XUPV2P Microblaze board
- commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Aug 5 15:53:50 2007 +0200
- [PATCH] Added support for Xilinx Emac community driver
- commit 86b116b1b1e165ca4840daefed36d2e3b8460173
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Aug 3 12:08:16 2007 +0200
- cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
- Add the ability for modules from the Schindler cm5200 family to use a
- single U-Boot image:
- - rename cm1_qp1 to cm5200
- - add run-time module detection
- - parametrize SDRAM configuration according to the module we are running on
- Few minor, board-specific fixes included in this patch:
- - better MAC address handling
- - updated default environment ('update' command uses +{filesize} now)
- - improved error messages in the auto-update code
- - allow booting U-Boot from RAM (CFG_RAMBOOT)
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
- Author: Andy Fleming <afleming@freescale.com>
- Date: Fri Aug 3 04:05:25 2007 -0500
- Add Marvell 1149 PHY support to the TSEC
- commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Aug 2 21:27:46 2007 +0200
- Coding style cleanup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 63e22764d2f8653f68888c667eb65b3996b52680
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Aug 2 10:11:18 2007 +0200
- Minor cleanup of <board>_nand build rules.
- commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Aug 2 08:33:56 2007 +0200
- ppc4xx: Code cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit c92409812206ac67a7fa7aae298539a9c3804a46
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Tue Jul 31 18:51:48 2007 +0200
- [ppc440SPe] Graceful recovery from machine check during PCIe configuration
- During config transactions on the PCIe bus an attempt to scan for a
- non-existent device can lead to a machine check exception with certain
- peripheral devices. In order to avoid crashing in such scenarios the
- instrumented versions of the config cycle read routines are introduced, so
- the exceptions fixups framework can gracefully recover.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- Acked-by: Rafal Jaworowski <raj@semihalf.com>
- commit dec99558b9ea75a37940d07f41a3565a50b54ad1
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Tue Jul 31 18:19:54 2007 +0200
- [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
- This brings back separate settings for PCIe bus numbers depending on chip
- revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
- commit. 440SPe rev. A does NOT work properly with the same settings as for
- the rev. B (no devices are seen on the bus during enumeration).
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Aug 2 00:48:45 2007 +0200
- Fix build errors and warnings / code cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
- Author: Eugene OBrien <eugene.obrien@advantechamt.com>
- Date: Tue Jul 31 10:24:56 2007 +0200
- ppc4xx: Update AMCC Bamboo 440EP support
- Changed storage type of cfg_simulate_spd_eeprom to const
- Changed storage type of gpio_tab to stack storage
- (Cannot access global data declarations in .bss until afer code relocation)
- Improved SDRAM tests to catch problems where data is not uniquely addressable
- (e.g. incorrectly programmed SDRAM row or columns)
- Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
- Fixed AM29LV320DT (OpCode Flash) sector map
- Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jul 31 08:37:01 2007 +0200
- ppc4xx: Update 440EPx lwmon5 board support
- - Clear ECC status regs after ECC POST test
- - Set dcbz for ECC generation with caches enabled as default
- - Code cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 30 11:04:57 2007 +0200
- ppc4xx: Only print ECC related info when the error bis are set
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e36220a4baf1f188ba60f17e9d0f043069b1362a
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Fri Jul 27 16:44:31 2007 +0200
- new FPGA image for PLU405 board
- new FPGA image for PLU405 board with improved CompactFlash timing
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Fri Jul 27 14:43:59 2007 +0200
- [ADS5121] Support for the ADS5121 board
- The following MPC5121e subsystems are supported:
- - low-level CPU init
- - NOR Boot Flash (common CFI driver)
- - DDR SDRAM
- - FEC
- - I2C
- - Watchdog
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- Signed-off-by: Jan Wrobel <wrr@semihalf.com>
- commit 1863cfb7b100ba0ee3401799457a01dc058745f8
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Fri Jul 27 14:22:04 2007 +0200
- [PPC] Remove unused MSR_USER definition
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit d4024bb72dd81695ec099b2199eda0d27c623e62
- Author: John Otken <john@softadvances.com>
- Date: Thu Jul 26 17:49:11 2007 +0200
- ppc4xx: Add support for AMCC 405EP Taihu board
- Signed-off-by: John Otken <john@softadvances.com>
- commit b66091de6c7390620312c2501db23d8391e7cabb
- Author: Anatolij Gustschin <agust@denx.de>
- Date: Thu Jul 26 15:08:01 2007 +0200
- ppc4xx: lwmon5: Update Lime initialization
- Change Lime SDRAM initialization to now support 100MHz and
- 133MHz (if enabled). Also the framebuffer is initialized to
- display a blue rectangle with a white border.
- Signed-off-by: Anatolij Gustschin <agust@denx.de>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9f24a808f17fc0f37b7fb4805f734741335caecc
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jul 24 09:52:52 2007 +0200
- ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
- The used Intel NOR FLASH chips have internally two dies, and are now
- treated as two seperate chips.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit aedf5bde179ecfbd0a96130d18996a96518b785f
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jul 24 07:20:09 2007 +0200
- ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
- As suggested by Hakan Eryigit, here an updated setup for the lwmon5
- interrupt controller.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a71d96eac8130b53a91f93cd10c70fca0db18d52
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 20 15:03:44 2007 +0200
- ppc4xx: Fix bug with default GPIO output value
- As spotted by Matthias Fuchs, the default output values for all GPIO1
- outputs were not setup correctly. This patch fixes this issue.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 531e3e8b831f357056448fa573137d5fb37000fd
- Author: Pavel Kolesnikov <concord@emcraft.com>
- Date: Fri Jul 20 15:03:03 2007 +0200
- POST: Add ECC POST for the lwmon5 board
- This patch adds ECC Post test for the Lwmon5 board based
- on PPC440EPx to U-Boot.
- Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
- Acked-by: Yuri Tikhonov <yur@emcraft.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit cc3023b9f95d7ac959a764471a65001062aecf41
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Thu Jul 19 17:12:28 2007 +0200
- Fix breakage of 8xx boards from recent commit.
- This patch fixes the negative consequences for 8xx of the recent
- "ppc4xx: Clean up 440 exceptions handling" commit.
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 16 13:11:12 2007 +0200
- Coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 16 10:02:12 2007 +0200
- ppc4xx: Code cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 16 10:01:38 2007 +0200
- ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 16 10:00:43 2007 +0200
- ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
- The new boardspecific DDR2 controller configuration is used for the Yucca
- board. Now the Yucca board with 440SPe Rev. A chips is also supported.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 16 09:57:00 2007 +0200
- ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
- The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
- support non default, boardspecific DDR(2) controller configuration.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5743a9207a370b90f09b20ebd61167c806b937f3
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 16 08:53:51 2007 +0200
- ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
- The new function remove_tlb() can be used to remove the TLB's used to
- map a specific memory region. This is especially useful for the DDR(2)
- setup routines which configure the SDRAM area temporarily as a cached
- area (for speedup on auto-calibration and ECC generation) and later
- need this area uncached for normal usage.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon Jul 16 00:31:07 2007 +0200
- [PATCH] Support for Xilinx EmacLite controller
- commit 3a6cab844cf74f76639d795e0be8717e02c86af7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Jul 14 22:51:02 2007 +0200
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Jul 14 13:11:28 2007 +0200
- [FIX] support for simply measuring time
- commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Jul 14 12:41:23 2007 +0200
- [FS] Added support for ROMFS
- commit 011595307731a7a67a7445d107c279d031e8ab97
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Sat Jul 14 01:06:58 2007 +0200
- [PCS440EP] - fix compile error, if BUILD_DIR is used
- commit 5a2f1098d81ad58b309e5e558d0492643166a799
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Jul 14 00:18:48 2007 +0200
- [PATCH] Support time without timer
- commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 13 21:43:55 2007 +0200
- [PATCH] Remove problem with disabled BARREL SHIFTER
- commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Jul 13 21:41:44 2007 +0200
- [FIX] correct help for rspr
- commit fad63407154f46246ce80d53a9c669a44362ac67
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Fri Jul 13 09:54:17 2007 +0200
- make show_boot_progress () weak.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 907902472391b6ca1876ec300687562ecaf459b1
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Fri Jul 13 08:26:05 2007 +0200
- [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
- - fix compile error, if BUILD_DIR is used
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jul 12 16:32:08 2007 +0200
- ppc4xx: Change receive buffer handling in the 4xx emac driver
- This change fixes a bug in the receive buffer handling, that
- could lead to problems upon high network traffic (broadcasts...).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 12 01:45:34 2007 +0200
- Update CHANGELOG, minor coding style cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
- Author: Andy Fleming <afleming@freescale.com>
- Date: Fri Jun 8 16:41:18 2007 -0500
- Remove erroneous errata code from Marvel 88E1111S driver
- The Marvel 88E1111S driver for the TSEC was copied from the
- 88E1101 driver, and included a fix for an erratum which does not
- exist on that part. Now it is removed
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue Jun 5 16:38:44 2007 -0500
- From: eran liberty <eran.liberty@gmail.com>
- adds the reset register to 85xx immap
- Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
- Author: Andy Fleming <afleming@freescale.com>
- Date: Thu May 10 17:50:01 2007 -0500
- Polished the 85xx ADS config files
- Made the boot commands use device trees by default.
- Also moved the ramdisk to 1000000 (I think the previous address
- was getting overridden during boot).
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed May 9 11:03:32 2007 -0500
- 8544ds: Fix Makefile after moving pixis to board/freescale.
- The OBJTREE != SRCTREE build scenario was broken.
- This fixes it.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed May 9 00:54:20 2007 -0500
- tsec: Fix PHY code to match first driver
- Jarrold Wen noticed that the generic PHY code always matches
- under the current implementation. Change it so the first match
- wins, and *only* unknown PHYs trigger the generic driver
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit ccc091aac61a38cd998d575d92f7232e256d6312
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue May 8 17:27:43 2007 -0500
- Add support for CPM device tree configuration to 8560 ADS
- * Adds code to modify CPM frequencies
- * Cleans up the config file to #define TSEC and (for now) #undef FCC
- * Adds the MII command for all 8560 ADS configurations
- * Updates config file to provide convenience commands for booting
- with a device tree
- Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
- Author: Andy Fleming <afleming@freescale.com>
- Date: Tue May 8 17:23:02 2007 -0500
- Fix Marvell 88e1145 PHY init code
- Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
- where the reset was being done after the errata code instead of
- before.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 5dc210dec5bace98a50b6ba905347890091a9bb0
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Jul 11 14:52:16 2007 -0500
- Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Jul 11 14:52:08 2007 -0500
- pciauto setup bridge
- The P2P bridge bus numbers programmed into the device are relative to
- hose->first_busno.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 571f49fa717004ca4268b4e24057efc7bf9f987b
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Jul 11 14:52:01 2007 -0500
- Support PCIe extended config registers
- FSL PCIe block has extended cfg registers in the 100 and 400 range.
- For example, to read the LTSSM register: pci display <busn>.0 404 1
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit ba5feb12581bb2912ce301e4866b71f846e9fc07
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Jul 11 14:51:48 2007 -0500
- Minor improvements to drivers/pci_auto.c
- - Make pciauto_{pre,post}scan_setup_bridge non-static
- - Added physical address display in debug messages.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 40e81addab7bb74d20ddf681ce9babc880a828ee
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Jul 11 14:51:35 2007 -0500
- Start pci hose scan from hose->current_busno.
- Ensure hose->current_busno is not less than first_busno. This fixes
- broken board code which leaves current_busno=0 when first_busno is
- greater than 0 for the cases with multiple controllers.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 3865b1fb7843a08ad49a6319a36415752276ff48
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jul 11 12:13:53 2007 +0200
- Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit fa1df308926a6f70e3504c57514ef27ac31fd13a
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Jul 11 20:11:07 2007 +0200
- CM1.QP1: Support for the Schindler CM1.QP1 board.
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Wed Jul 11 18:39:11 2007 +0200
- [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
- - now the Flash ST M29W040B is supported (not tested)
- - fix the "led" command
- - fix compile error, if BUILD_DIR is used
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Jul 8 13:44:27 2007 +0200
- Fix malloc problem introduced with the relocation fixup for the PPC platform
- The relocation fixup didn't handle the malloc pointer initialization
- correctly. This patch fixes this problem. Tested successfully on 4xx.
- The relocation fixup patches for 4xx will follow soon.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0dca874db62718e41253659e60f3a1de7eb418ce
- Author: TsiChung <tcliew@Goku.(none)>
- Date: Tue Jul 10 15:45:43 2007 -0500
- Cache update and added CFG_UNIFY_CACHE
- Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
- Signed-off-by: TsiChung <tcliew@Goku.(none)>
- commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:36:16 2007 -0500
- Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
- Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:31:25 2007 -0500
- Update header files
- Include immap.h and renamed mcfrtc.h to rtc.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 2870e98ac8e5553e9187b12a47e5f46babb53990
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:29:21 2007 -0500
- Add mcffec_initialize()
- Added mcffec_initialize() in eth_initialize()
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:27:40 2007 -0500
- Update header file and clean up
- Include immap.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 0cee9c66318602c856a899ae5fa7579ccba6443a
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:23:15 2007 -0500
- New uart structure and defines
- Seperated from mcfuart.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit a90e79de8d99e9c9d69d60bfff9f24c337165900
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:22:31 2007 -0500
- New timer structure and defines
- Seperated from mcftimer.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit e04acb2eba4782489417240eff76e20e176aec10
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:21:09 2007 -0500
- Rename mcfrtc to rtc
- Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:17:36 2007 -0500
- Rename mcfserial.c. Update include header
- Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:13:58 2007 -0500
- Header file update, clean up and cache handling
- Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:10:40 2007 -0500
- Create interrupts.c and modify Makefile
- interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit ddd104f1ed655eda50c06ba636237a83ed943f34
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:06:55 2007 -0500
- Enable Icache
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit b9bf3de377b2bae70c983c9b97feae914999e735
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:05:31 2007 -0500
- Update header file and some clean up
- Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 84a015b52ec820a5ae173717d78516de731c89c2
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:03:28 2007 -0500
- Update header file and enable icache
- Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 23:01:22 2007 -0500
- Update header file and removed interrupt_init()
- Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 3b635492c95bd0d6e08f93f699821cba1f602a64
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:57:46 2007 -0500
- Update for flash.o and mii.o
- Removed flash.o and added mii.o
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit c5ded275d839e4ff79f41718d50a835d989f57bc
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:56:19 2007 -0500
- MII functions calls.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 427c814104560e29bda14955c67703245aaaa5b4
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:54:42 2007 -0500
- Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
- The removed MII routines will be placed in mii.c.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:51:05 2007 -0500
- Duplicate code
- There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 2744354a8437b8f78db178e30660215688bff570
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:46:38 2007 -0500
- Seperate old structure defines and new structure defines
- Removed new uart structure and defines to uart.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:45:01 2007 -0500
- Seperate old structure defines and new structure defines
- New timer structure and defines will move to new timer.h
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:42:23 2007 -0500
- Clean up
- Removed whitespace
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:41:24 2007 -0500
- Clean up
- Replaced whitespace with tabs
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:39:07 2007 -0500
- Create new header file and move peripherals base address from configs file to new header file.
- Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
- Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- Date: Thu Jul 5 22:24:58 2007 -0500
- Revert file mode
- Changed MAKEALL file mode to executable, removed executable file mode from Makefile
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
- commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 11:19:50 2007 -0500
- disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 11:13:21 2007 -0500
- drivers/: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f40a7f3e3888b42a43674b099e5470022c8c544c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 11:07:56 2007 -0500
- fs/: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 11:05:02 2007 -0500
- net/: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 902531788376046da212afd1661cffb62f3daa1c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 11:02:44 2007 -0500
- common/: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit d39b57415838c73fb0a37eca84de3c68ba990586
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 10:48:22 2007 -0500
- board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 77a318545d57aefa844752465b94c7e09a3f26d0
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 10:39:10 2007 -0500
- board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
- Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
- Those always evaluated TRUE, and thus were always compiled
- even when IDE really wasn't defined/wanted.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 10:27:39 2007 -0500
- cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 079a136c3588814784561d6e4856970ee82d6e2a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 10:12:10 2007 -0500
- include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
- Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
- used to be included but CONFIG_BOOTP_MASK was not defined.
- Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 09:38:02 2007 -0500
- include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
- Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
- used to be included but CONFIG_BOOTP_MASK was not defined.
- Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 09:29:01 2007 -0500
- include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
- Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
- used to be included but CONFIG_BOOTP_MASK was not defined.
- Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 09:22:23 2007 -0500
- include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
- Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
- used to be included but CONFIG_BOOTP_MASK was not defined.
- Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 09:10:49 2007 -0500
- include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
- Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
- used to be included but CONFIG_BOOTP_MASK was not defined.
- Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Jul 10 09:02:57 2007 -0500
- include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
- Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
- used to be included but CONFIG_BOOTP_MASK was not defined.
- Remove lingering references to CFG_CMD_* symbols.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 22:08:34 2007 -0500
- Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
- All of the choices for CONFIG_BOOTP_ are now documented in
- the README file. You must now individually select exactly
- the set that you want using a series of
- #define CONFIG_BOOTP_<x>
- statements in the board port config files now.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit d3b8c1a743dcd31625c99e6a44590f207eb00028
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 21:57:31 2007 -0500
- include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 2fd90ce575b02d189cbf443c85309bcd001aa393
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 21:48:26 2007 -0500
- include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 37d4bb70586659dedef1658ce1bed071be098aec
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 21:38:02 2007 -0500
- include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 18225e8dd1950bd6dbf35011e436db7f474c187d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 21:31:24 2007 -0500
- include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 21:24:19 2007 -0500
- include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 21:16:53 2007 -0500
- include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 19:12:30 2007 -0500
- Retire CONFIG_COMMANDS finally.
- Strip old CFG_CMD_* symbols out.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b5501f7d720fed99ab0b42c83f5dea52868ce007
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 19:10:03 2007 -0500
- Update README.* to reference new CONFIG_CMD_* names now.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 19:06:00 2007 -0500
- cpu/m*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:57:22 2007 -0500
- cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ab3abcbabd840928fb1eb5122118ca466b5e5013
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:45:16 2007 -0500
- board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:38:39 2007 -0500
- board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit c508a4cefd8a953fc64957650506a035e6e3d9d1
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:31:28 2007 -0500
- board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:24:55 2007 -0500
- board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit fcec2eb93e126400009729328e797f12bc94f1fd
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:19:09 2007 -0500
- board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a593814f2be0c9cdc3133cd550b167b8a988328f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:10:50 2007 -0500
- rtc/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 67350568f9d46e66c21829f3513b3db0caeb948b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:05:38 2007 -0500
- lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7def6b34f910f08d7ef0a14646da067719237ca2
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 18:02:11 2007 -0500
- lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:56:50 2007 -0500
- fs/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit c91898bbc505aff3e12a807af88e76da18efb7ee
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:46:09 2007 -0500
- tools/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:45:14 2007 -0500
- net/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:39:42 2007 -0500
- drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:30:01 2007 -0500
- drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:22:37 2007 -0500
- disk/: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 639221c76c88215bd55af83ad174fc30d1940f8f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Jul 9 17:15:49 2007 -0500
- include/: Remove obsolete references to CONFIG_COMMANDS
- Mostly removed from comments here.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Jul 10 00:01:28 2007 +0200
- Coding style cleanup; update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit c8603cfbd4573379a6076c9c208545ba2bbf019a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jul 9 11:00:24 2007 +0200
- Small coding style cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Jul 9 10:10:08 2007 +0200
- Migrate esd 405EP boards to new NAND subsystem
- Remove unused CFG_NAND_LEGACY define
- These boards to not have NAND.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Jul 9 10:10:06 2007 +0200
- Migrate esd 405EP boards to new NAND subsystem
- Migrate esd 405EP boards to new NAND subsystem
- -cleanup
- -use correct io accessors (in/out_be32())
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit e09f7ab5749c345f924da272bea0521a73af5b11
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Mon Jul 9 10:10:04 2007 +0200
- Migrate esd 405EP boards to new NAND subsystem
- This patch prepares the migration from the legacy NAND driver
- to U-Boot's new NAND subsystem for esd boards.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit c3517f919d0f61650cf3027fd4faf0f631142f6c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 18:10:08 2007 -0500
- common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 18:05:39 2007 -0500
- common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit c76fe47425afc7d5d670ff0539823c85d65d9c42
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 18:02:23 2007 -0500
- common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit baa26db4113679b80970ff447d91cc10217742a6
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 17:51:39 2007 -0500
- common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 17:02:01 2007 -0500
- Clear up confusion over the CMD_POST and POST_DIAG mess.
- For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
- when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
- Clear this mess up some.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b3631487105a57ab7cbadfc26efbaf9676275018
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 15:45:08 2007 -0500
- Remove references to the old cmd_confdefs.h include file.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 15:42:59 2007 -0500
- include/configs: Catch some CONFIG_CMD_* conversion stragglers.
- Use new CONFIG_CMD_* in lwmon5.h board config file.
- Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a5562901661bd428f7e5feb333f796372cb81019
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 15:31:57 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 15:02:44 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various S* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 15:12:40 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various R* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 14:55:07 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 14:49:44 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various P* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 14:21:43 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 14:14:17 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various M* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 348f258f24253433e4a2302a0bbceb6740a67246
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 13:46:18 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sun Jul 8 10:09:35 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various H* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 60a0876b5106b34220e459c208bbf648073306c0
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sat Jul 7 21:04:26 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit dcaa71562826a2466e894c868d132509dcda8444
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sat Jul 7 20:56:05 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various E* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 3c3227f3c737502311b25b72084573901cbbf17d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Sat Jul 7 20:40:43 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various D* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Jul 5 19:52:35 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various C* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Jul 5 19:32:07 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various B* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 498ff9a228485bd4b9f23d066bada268f9add1dd
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Jul 5 19:13:52 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various A* named board config files.
- Since ADS860.h includes "board/fads/fads.h" with ramifications
- on the CONFIG_COMMAND treatment, it too has to be adjusted to
- exclude already configured commands in this same commit.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 10e038932f22ee80ebd53de312531e70e6590a2f
- Author: Thomas Knobloch <knobloch@siemens.com>
- Date: Fri Jul 6 14:58:39 2007 +0200
- [NAND] Bad block skipping for command nboot
- The old implementation of command nboot does not support reading the image from
- NAND flash with skipping of bad blocks. The patch implements a new version of
- the nboot command: by calling nboot.jffs2 from the u-boot command line the
- command will load the image from NAND flash with respect to bad blocks (by using
- nand_read_opts()). This is similar to e.g. the NAND read command: "nand
- read.jffs2 ...".
- Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 6 12:26:51 2007 +0200
- ppc4xx: Update lwmon5 default environment
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5d187430a055d62f17ca84d75e7245439d1f7e75
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 6 11:48:24 2007 +0200
- ppc4xx: Update lwmon5 board
- Add unlock=yes environment variable to default variables to unlock
- the CFI flash by default.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jul 6 09:45:47 2007 +0200
- Fix problem with get/setdcr commands introduced by cfg patches
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jul 6 02:50:19 2007 +0200
- Code cleanup and default config update for STC GP3 SSA board.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit e4dbe1b215f5c6c462e76909d240bd96472b84de
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 5 17:56:27 2007 +0200
- Fixing some typos etc. introduced mainly by cfg patches.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Jul 5 11:12:16 2007 +0200
- Minor coding style cleanup. Update CHANGELOG.
- commit dca3b3d6d6396b67e5e84af53452164923c73443
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:46 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:38 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:30 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various s* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:23 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 26a34560d56a9df5bc2ae23525d9229736134757
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:17 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various p* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a5cb23092a7d31490a33d4ec871468b63babfa3c
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:13 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various o* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:07 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various n* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:33:01 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various m* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:57 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various l* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:51 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:32 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various i* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:25 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various h* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:19 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various g* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:10 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various e* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:32:03 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various d* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:31:56 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various c* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:31:49 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various b* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 0b361c916617aff79e647b40f0e43361e0bbaccf
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:31:42 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various a* named board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b730cda82e362df6a22f4c59c0a9b97e885b1014
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:31:35 2007 -0500
- include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit d794cfefead5fc177cf4f41164e80382e9c9484a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:31:15 2007 -0500
- include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:31:07 2007 -0500
- include/configs: Use new CONFIG_CMD_* in STx board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:30:58 2007 -0500
- include/configs: Use new CONFIG_CMD_* in sbc* board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 2694690e285acaa34922f55f4b5ae030da60c55a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:30:50 2007 -0500
- include/configs: Use new CONFIG_CMD_* in TQM board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1cc4c458329765b58e584a19821e796b3c10e976
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:30:28 2007 -0500
- include/configs: Use new CONFIG_CMD_* in 82xx board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jul 4 22:30:06 2007 -0500
- include/configs: Use new CONFIG_CMD_* in 83xx board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b44896215a09c60fa40cae906f7ed207bbc2c492
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Thu Jul 5 08:17:37 2007 +0200
- Merged POST framework with the current TOT.
- Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
- commit b24629fa377214d63bb40d1360e354b6d3e4af56
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jun 13 13:23:15 2007 -0500
- mpc86xx: Remove old CFG_CMD_* references.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jun 13 13:22:54 2007 -0500
- Add MPC8568MDS to MAKEALL 85xx target.
- It was missing from the original port submission.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jun 13 13:22:08 2007 -0500
- include/configs: Use new CONFIG_CMD_* in 85xx board config files.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 56b304ac2091689506088a9ae67f63fd6300cf16
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jun 13 13:21:37 2007 -0500
- Fix #if typo in CONFIG_CMD_* changes.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f780b83316d9af1f61d71cc88b1917b387b9b995
- Author: Niklaus Giger <niklausgiger@gmx.ch>
- Date: Wed Jun 27 18:11:38 2007 +0200
- resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
- Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
- commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jul 4 10:06:30 2007 +0200
- ppc4xx: Update lwmon5 board
- - Add optional ECC generation routine to preserve existing
- RAM values. This is needed for the Linux log-buffer support
- - Add optional DDR2 setup with CL=4
- - GPIO50 not used anymore
- - Lime register setup added
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6810a34677dbc446334f5e451f1682426dd33b49
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:17:28 2007 -0600
- Fix Makefile to use $(MKCONFIG) macro for all board ports
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:17:28 2007 -0600
- Fix Makefile to use $(MKCONFIG) macro for all board ports
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 057004f4a4863554d56cc56268bfa7c7d9738e27
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:49 2007 -0600
- Correct fixup relocation for mpc83xx
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:44 2007 -0600
- Correct fixup relocation for mpc8260
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f3a52fe05923935db86985daf9438e2f70ac39aa
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:39 2007 -0600
- Correct fixup relocation for mpc824x
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:34 2007 -0600
- Correct fixup relocation for mpc8220
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:29 2007 -0600
- Correct fixup relocation for MPC5xxx
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 3649cd99ba815b6601868735765602f00ef3692b
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:24 2007 -0600
- Correct relocation fixup for mpc5xx
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:19 2007 -0600
- Don't set gd->reloc_off if relocation of .fixup works correctly
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:14 2007 -0600
- Remove obsolete mpc83xx linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:09 2007 -0600
- Consolidate mpc8260 linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:34:04 2007 -0600
- Remove obsolete mpc824x linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:59 2007 -0600
- Remove obsolete mpc824x linker scripts (3 of 4)
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit a71c084f3ac7fedf144537db2b2da47323068833
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:53 2007 -0600
- Remove obsolete mpc824x linker scripts (2 of 4)
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f670a15468d1365241d40022b9408e1004181f5e
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:48 2007 -0600
- Remove obsolete mpc824x linker scripts (1 of 4)
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 09555bd45a04c0e54f172528d21bc18896550d28
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:43 2007 -0600
- Remove obsolete mpc8220 linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5efb992f046e51225c93d52f80fecbe433abd789
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:38 2007 -0600
- Remove obsolete mpc5xxx linker scripts (3 of 3)
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 07c13dfef65b31647e69d8b61daa1eec598add1a
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:33 2007 -0600
- Remove obsolete mpc5xxx linker scripts (2 of 3)
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:28 2007 -0600
- Remove obsolete mpc5xxx linker scripts (1 of 3)
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit b7d8e05f8675249b5f208aa73babeed384a4519d
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:23 2007 -0600
- Remove obsolete mpc5xx linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:18 2007 -0600
- Consolidate mpc83xx linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:13 2007 -0600
- Consolidate mpc8260 linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:08 2007 -0600
- Consolidate mpc824x linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 9c757b789a59a855db57b448dd825329c4e9c4a0
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:33:03 2007 -0600
- Consolidate mpc8220 linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit d181c9a15cd41863fe24840d17848429f27d3c8c
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:32:58 2007 -0600
- Consolidate mpc5xxx linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 287ac924adb7291bebe5086652a362a30ab28b13
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Jul 3 00:32:53 2007 -0600
- Consolidate mpc5xx linker scripts
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 4 00:43:53 2007 +0200
- Fix a few file permission problems.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jul 4 00:38:38 2007 +0200
- Minor coding style cleanup. Rebuild CHANGELOG file.
- commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:44 2007 -0500
- configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 602ad3b33d9ceef83dbab46be68646d645d637ee
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:39 2007 -0500
- README: Rewrite command line config to use CONFIG_CMD_* names.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 72a074cec68e5bad60d63206c050974e08afd804
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:34 2007 -0500
- include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:28 2007 -0500
- tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 9107ebe0d352420895ab69b715697bdebc8caf50
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:23 2007 -0500
- board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 5e378003d592ea828ec69d6defcd4de79096dd5c
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:19 2007 -0500
- board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 737184114ec9c9e0ab94d6713536126073bd2472
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:15 2007 -0500
- cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f48070fe5fe440dfb5ee5268c920de70e48ea327
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:08 2007 -0500
- cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:03:03 2007 -0500
- lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:58 2007 -0500
- lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 98b79003c21c2578206003256de4e781d6b36ca8
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:53 2007 -0500
- rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 6e2115acb6a892d53a6881bf253ae41d3df39156
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:49 2007 -0500
- net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 45cdb9b72c94655c7308b464a2666057c0b286e0
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:34 2007 -0500
- disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:20 2007 -0500
- fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit d5be43de93ff905c465e509d45a3164ef48d26e7
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:10 2007 -0500
- drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b453960d4fdb87b3970d96119b90df2ed024fc4a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:02:05 2007 -0500
- common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:01:54 2007 -0500
- common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit a76adc8142c1d956385a109e0b70f9319ede4d66
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:01:43 2007 -0500
- common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
- This is a compatibility step that allows both the older form
- and the new form to co-exist for a while until the older can
- be removed entirely.
- All transformations are of the form:
- Before:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
- After:
- #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Mon Jun 11 19:01:34 2007 -0500
- Introduce initial versions of new Command Config files.
- Derive three new files from cmd_confdefs.h:
- config_bootp.h - Has BOOTP related config options, not commands
- config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
- config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
- For now, include "config_bootp.h" for compatability until all
- users of it directly include it properly.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1f2a05898658900dc5717761e27abf2052e67e13
- Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
- Date: Sat Jun 30 18:50:48 2007 +0200
- Fix S-ATA support.
- Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
- commit a5d71e290f3673269be8eefb4ec44f53412f9461
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Mon Jun 25 19:11:37 2007 +0200
- [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
- Author: Niklaus Giger <niklaus.giger@nestal.com>
- Date: Mon Jun 25 17:03:13 2007 +0200
- ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
- This patch prints the DDR status registers upon machine check
- interrupt on the 440EPx/GRx. This can be useful especially when
- ECC support is enabled.
- I added some small changes to the original patch from Niklaus to
- make it compile clean.
- Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 807018fb7faceb429ce0cb47baa2073746b33a4e
- Author: Niklaus Giger <niklaus.giger@nestal.com>
- Date: Mon Jun 25 16:50:55 2007 +0200
- ppc4xx: Fix O=buildir builds
- This patch fixes the problem to assemble cpu/ppc4xx/start.S
- experienced last week where building failed having specified
- O=../build.sequoia.
- Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
- commit 466fff1a7bb5fe764a06450626f6098219f446b8
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jun 25 15:57:39 2007 +0200
- ppc4xx: Add pci_pre_init() for 405 boards
- This patch removes the CFG_PCI_PRE_INIT option completely, since
- it's not needed anymore with the patch from Matthias Fuchs with
- the "weak" pci_pre_init() implementation.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6f35c53166213c24a5a0e2390ed861136ff73870
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Sun Jun 24 17:41:21 2007 +0200
- ppc4xx: Maintenance patch for esd's CPCI405 derivats
- -add pci_pre_init() for pci interrupt fixup code
- -disable phy sleep mode via reset_phy() function
- -use correct io accessors
- -cleanup
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Sun Jun 24 17:23:41 2007 +0200
- ppc4xx: Add pci_pre_init() for 405 boards
- This patch adds support for calling a plattform dependant
- pci_pre_init() function for 405 boards. This can be used to
- move the current pci_405gp_fixup_irq() function into the
- board code.
- This patch also makes the CFG_PCI_PRE_INIT define obsolete.
- A default function with 'weak' attribute is used when
- a board specific pci_pre_init() is not implemented.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jun 22 23:59:00 2007 +0200
- Coding stylke cleanup; rebuild CHANGELOG
- commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
- Author: Igor Lisitsin <igor@emcraft.com>
- Date: Wed Apr 18 14:55:19 2007 +0400
- Adapt log buffer code to support Linux 2.6
- A new environment variable, "logversion", selects the log buffer
- behaviour. If it is not set or set to a value other than 2, then the
- old, Linux 2.4.4, behaviour is selected.
- Signed-off-by: Igor Lisitsin <igor@emcraft.com>
- --
- commit a11e06965ec91270c51853407ff1261d3c740386
- Author: Igor Lisitsin <igor@emcraft.com>
- Date: Wed Mar 28 19:06:19 2007 +0400
- Extend POST support for PPC440
- Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
- Signed-off-by: Igor Lisitsin <igor@emcraft.com>
- --
- commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Fri Jun 22 19:11:54 2007 +0200
- [PCS440EP] upgrade the PCS440EP board:
- - Show on the Status LEDs, some States of the board.
- - Get the MAC addresses from the EEProm
- - use PREBOOT
- - use the CF on the board.
- - check the U-Boot image in the Flash with a SHA1
- checksum.
- - use dynamic TLB entries generation for the SDRAM
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 3a1f5c81b0b9557817a789bece839905581c2205
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 22 16:58:40 2007 +0200
- ppc4xx: Fix problem with extended program_tlb() funtion
- The recently extended program_tlb() function had a problem when
- multiple TLB's had to be setup (for example with 512MB of SDRAM). The
- virtual address was not incremented. This patch fixes this issue
- and is tested on Katmai with 512MB SDRAM.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
- Author: Rafal Jaworowski <raj@semihalf.com>
- Date: Fri Jun 22 14:58:04 2007 +0200
- [ppc] Fix build breakage for all non-4xx PowerPC variants.
- - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
- - minor 4xx cleanup
- commit d677b32855f577ae2690dcd64a172cdd706e0ffc
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Fri Jun 22 10:34:12 2007 +0200
- [patch] add nand_init() prototype to nand.h
- since nand_init() is expected to be called by other parts of u-boot, there
- should be a prototype for it in nand.h
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jun 20 18:14:24 2007 +0200
- Coding style cleanup. Refresh CHANGELOG.
- commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jun 19 17:22:44 2007 +0200
- ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
- This patch adds a board command to configure the I2C bootstrap EEPROM
- values. Right now 533 and 667MHz are supported for booting either via NOR
- or NAND FLASH. Here the usage:
- => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
- => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jun 19 16:42:31 2007 +0200
- [ppc4xx] Fix problem with NAND booting on AMCC Acadia
- The latest changes showed a problem with the location of the NAND-SPL
- image in the OCM and the init-data area (incl. cache). This patch
- fixes this problem.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 86ba99e34194394052d24c04dc40d1263d29a26f
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jun 19 16:40:58 2007 +0200
- [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
- Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- Date: Mon Jun 18 13:50:13 2007 -0500
- Added M5329AFEE and M5329BFEE Platforms
- Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
- drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
- include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
- rtc/mcfrtc.c
- Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
- common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
- include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
- include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
- include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
- lib_m68k/time.c, net/eth.c and rtc/Makefile
- Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Jun 17 19:04:11 2007 +0200
- [fix] email reparation
- commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Jun 17 19:03:21 2007 +0200
- [FIX] fix microblaze file permitission
- commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 15 11:33:41 2007 +0200
- [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
- Now CONFIG_440 has to be defined in all PPC440 board config files.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit efa35cf12d914d4caba942acd5a6c45f217de302
- Author: Grzegorz Bernacki <gjb@semihalf.com>
- Date: Fri Jun 15 11:19:28 2007 +0200
- ppc4xx: Clean up 440 exceptions handling
- - Introduced dedicated switches for building 440 and 405 images required
- for 440-specific machine instructions like 'rfmci' etc.
- - Exception vectors moved to the proper location (_start moved away from
- the critical exception handler space, which it occupied)
- - CriticalInput now serviced (with default handler)
- - MachineCheck properly serviced (added a dedicated handler and return
- subroutine)
- - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
- unhandled and those not relevant for 4xx were eliminated)
- - Eliminated Linux leftovers, removed dead code
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 15 08:18:01 2007 +0200
- [ppc4xx] Add initial lwmon5 board support
- This patch adds initial support for the Liebherr lwmon5 board euqipped
- with an AMCC 440EPx PowerPC.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 85f737376d5ff3d5f0d45a8b657686326d175307
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 15 07:39:43 2007 +0200
- [ppc4xx] Extend 44x GPIO setup with default output state
- The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
- is extended with the default GPIO output state (level).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jun 14 11:14:32 2007 +0200
- [ppc4xx] Extend program_tlb() with virtual & physical addresses
- Now program_tlb() allows to program a TLB (or multiple) with
- different virtual and physical addresses. With this change, now one
- physical region (e.g. SDRAM) can be mapped 2 times, once with caches
- diabled and once with caches enabled.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
- Author: Detlev Zundel <dzu@denx.de>
- Date: Wed May 23 19:02:41 2007 +0200
- Change 'repeatable' attribute of some commands to sensible values.
- Most prominently this changes 'erase' to be non-repeatable.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 5afb202093f6a001797db92cf695b93a70ea9ab4
- Author: Detlev Zundel <dzu@denx.de>
- Date: Wed May 23 18:47:48 2007 +0200
- Fix 'run' not to continue after interrupted command
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 9b7464a2c88614e1061f509c48930a3d240d1a35
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Mon Jun 11 15:14:24 2007 +0200
- USB: This patch fix readl in ohci swap reg access.
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Jun 8 14:52:22 2007 +0200
- TQM5200: Add Flat Device Tree support, update default env. accordingly.
- Signed-off-by: Jan Wrobel <wrr@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 9045f33c023f698660a2e45d1b2194c0711abebc
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Jun 8 10:24:58 2007 +0200
- Fix config problems on SC3 board; make ide_reset_timeout work.
- commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
- Author: Benoît Monin <bmonin@adeneo.eu>
- Date: Fri Jun 8 09:55:24 2007 +0200
- [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
- Set the correct value in GPIOx_TCR when configuring the gpio
- with CFG_440_GPIO_TABLE.
- Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f539edc076cfe52bff919dd512ba8d7af0e22092
- Author: Vadim Bendebury <vbendeb@google.com>
- Date: Thu May 24 15:52:25 2007 -0700
- cosmetic changes to bcm570x driver
- This is a cosmetic only changes submission.
- It affects files relevant to bcm570x driver.
- the commands used to generate this change was
- cd drivers
- Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
- The BMW target (the only one using this chip so far) builds cleanly, the
- `before and after' generated object files for drivers/bcm570x.c and
- drivers/tigon3.o are identical as reported by objdump -d
- Signed-off-by: Vadim Bendebury <vbendeb@google.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Jun 6 16:26:56 2007 +0200
- Coding Style cleanup; generate new CHANGELOG file.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Jun 6 11:49:44 2007 +0200
- TRAB, USB: update trab board configuration for use of generic ohci driver
- commit dace45acd1c1357daa9322099d07c9a9e08b0024
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Jun 6 11:49:43 2007 +0200
- USB: ohci fixes and cleanup for ppc4xx and yosemite board.
- commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Jun 6 11:49:43 2007 +0200
- USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
- commit fc43be478f2aa37ce38acd85355038866e4162af
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Jun 6 11:49:35 2007 +0200
- USB/OHCI: endianness cleanup in the generic ohci driver
- commit c440bfe6d6d92d66478a7e84402b31f48413617b
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jun 6 11:42:13 2007 +0200
- ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
- This patch adds NAND booting support for the AMCC Acadia eval board.
- Please make sure to configure jumper J7 to position 2-3 when booting
- from NOR, and to position 1-2 when booting for NAND.
- I also added a board command to configure the I2C bootstrap EEPROM
- values. Right now only 267MHz is support for booting either via NOR
- or NAND FLASH. Here the usage:
- => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
- => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
- Author: Rodolfo Giometti <giometti@linux.it>
- Date: Wed Jun 6 10:08:14 2007 +0200
- Files include/linux/byteorder/{big,little}_endian.h define
- __BIG_ENDIAN and __LITTLE_ENDIAN.
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Wed Jun 6 10:08:14 2007 +0200
- Add USB PCI-OHCI, USB keyboard and event poll support to the
- MPC8641HPCN board config file.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Wed Jun 6 10:08:14 2007 +0200
- USB PCI-OHCI, interrupt pipe and usb event poll support
- This patch added USB PCI-OHCI chips support, interrupt pipe support
- and usb event poll support. For supporting the USB interrupt pipe, the
- globe urb_priv is moved to purb in ed struct. Now, we can process
- several urbs at one time. The interrupt pipe support codes are ported
- from Linux kernel 2.4.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit fdcfaa1b02268b2899e374b35adf936c911a47eb
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Wed Jun 6 10:08:13 2007 +0200
- USB event poll support
- This patch adds USB event poll support, which could be used in usbkbd
- and other usb devices driver when the asynchronous interrupt
- processing is supported.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com
- commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
- Author: Rodolfo Giometti <giometti@linux.it>
- Date: Wed Jun 6 10:08:12 2007 +0200
- ISP116x: delay for crappy USB keys
- Using some (very) slow USB keys cause the USB host controller buffers
- are not ready to be read by the CPU so we need an extra delay before
- reading the USB storage data.
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit 09444143670c9c2243cb7aba9f70b3713d33bed1
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Jun 6 10:08:12 2007 +0200
- Change duplicate usb_cpu_init_fail to usb_board_init_fail
- Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
- this out.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Tue Jun 5 12:30:52 2007 -0500
- mpc8641 image size cleanup
- e600 does not have a bootpg restriction.
- Move the version string to beginning of image at fff00000.
- Resetvec.S is not needed.
- Update flash copy instructions.
- Add tftpflash env variable
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
- Author: Benoît Monin <bmonin@adeneo.eu>
- Date: Mon Jun 4 08:36:05 2007 +0200
- [PATCH] Fix ppc4xx bootstrap letter displayed on startup
- The attached patch is mainly cosmetic, allowing u-boot to
- display the correct bootstrap option letter according to the
- datasheets.
- The original patch was extended with 405EZ support by Stefan
- Roese.
- Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5b1313fb2758ffce8b624457f777d8cc6709608d
- Author: Nikita V. Youshchenko <yoush@debian.org>
- Date: Wed May 23 12:45:19 2007 +0400
- fix compilation problem for mpc8349itx CFG_RAMBOOT
- Current include/configs/MPC8349ITX.h does contain some support for building
- image that will be started from memory (without putting in into flash).
- It could be triggered by building with TEXT_BASE set to a low value.
- However, this support is incomplete: using of low TEXT_BASE causes
- defining configuration macros in inconsistent way, which later leads
- to compilation errors. In particular. flash support is being disabled,
- but then flash structures get referenced.
- This patch fixes this, making it possible to build with low TEXT_BASE.
- Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 8a364f0970de49949d635e60accf463c6443ef8c
- Author: Nikita V. Youshchenko <yoush@debian.org>
- Date: Wed May 23 12:45:25 2007 +0400
- add missing 'console' var to default mpc8349itx config
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 16:18:17 2007 +0200
- ppc4xx: Add missing file for Bamboo NAND booting support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:58:19 2007 +0200
- ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
- This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
- suggested by AMCC it is not recommended to dynamically change the EBC
- speed after bootup. So we undo this change to be on the safe side.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:29:04 2007 +0200
- ppc4xx: Update Sequoia NAND booting support with ECC
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:27:11 2007 +0200
- ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
- This patch adds NAND booting support for the AMCC Bamboo eval board.
- Since the NAND-SPL boot image is limited to 4kbytes, this version
- only supports the onboard 64MBytes of DDR. The DIMM modules can't be
- supported, since the setup code for I2C DIMM autodetection and
- configuration is too big for this NAND bootloader.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 42be56f53c8b107868e6125c8524ae84293e95a7
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:23:04 2007 +0200
- NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
- The U-Boot NAND booting support is now extended to support ECC
- upon loading of the NAND U-Boot image.
- Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a471db07fbb65a841ffc9f4f112562b945230f98
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:19:29 2007 +0200
- ppc4xx: Prepare Bamboo port for NAND booting support
- This patch updates the "normal" Bamboo NOR booting port, so
- that it is compatible with the coming soon NAND booting
- Bamboo port.
- It also enables the 2nd NAND flash on the Bamboo.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:16:58 2007 +0200
- ppc4xx: Update in_be32() functions and friends to latest Linux version
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:15:12 2007 +0200
- NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
- This patch adds hardware ECC support to the NDFC driver. It also
- changes the register access from using the "simple" in32/out32
- functions to the in_be32/out_be32 functions, which make sure
- that the access is correctly synced. This is the only recommended
- access to SoC registers in the current Linux kernel.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:12:15 2007 +0200
- NAND: Update nand_ecc.c to latest Linux version
- This patch updates the nand_ecc code to the latest Linux version.
- The main reason for this is the more compact code. This makes
- it possible to include the ECC code into the NAND bootloader
- image (NAND_SPL) for PPC4xx.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 15:09:50 2007 +0200
- ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 13:45:24 2007 +0200
- ppc4xx: Change Luan config file to support ECC
- With the updated 44x DDR2 driver the Luan board now supports
- ECC generation and checking.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7187db73491c8de0fb56efb5e5134ba5ec443089
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jun 1 13:45:00 2007 +0200
- ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
- Add config option for 180 degree advance clock control as needed
- for the AMCC Luan eval board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ee1529838abbfaa35f14e3ffbeaaba693159475f
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu May 31 17:20:09 2007 +0200
- Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 7049288fb1f16f1b317140226cdebd07bd416395
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 17:26:46 2007 +0200
- Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 4520fd4d2c450da49637216aa0e53739b61c60ac
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 17:06:36 2007 +0200
- Motion-PRO: Add support for redundant environment.
- Enable redundant environment, add a MTD partition for it; also add env.
- variable command for passing MTD partitions to the kernel command line.
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit a26eabeec31746f06d309103690892805696e344
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 17:05:11 2007 +0200
- Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
- Allow passing longer command line to the kernel - useful especially
- for passing MTD partition layout.
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 9160b96f71483a116de81c68985e8ee306d36764
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 17:04:18 2007 +0200
- Fix: Add missing NULL termination in strings expanded by macros parser.
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 630ec84aef7228fc1dbfb38dec78541403a786cd
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 17:03:37 2007 +0200
- Motion-PRO: Update EEPROM's page write bits and write delay.
- Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
- have a page write capability of two bytes", and "This device offers fast (1ms)
- byte write". Add 3ms of extra delay.
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit c00125e07c1ebc125bab40e1e18bceed8be0c162
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 16:58:45 2007 +0200
- MPC5XXX, Motion-PRO: Fix PHY initialization problem.
- After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
- networking does not function. This commit switches PHY to TX mode by clearing
- the FX_SEL bit of Mode Control Register. It also reverses commit
- 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 16:57:15 2007 +0200
- Motion-PRO: Add support for the temperature sensor.
- Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 16:55:23 2007 +0200
- Motion-PRO: Add displaying of CPLD revision information during boot.
- Signed-off-by: Jan Wrobel <wrr@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit c99512d6bd3973f01ca2fc4896d829b46e68f150
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 16:53:43 2007 +0200
- MPC5xxx: Change names of defines related to IPB and PCI clocks.
- Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
- them does not cause PCI or IPB clocks to run at the specified speed.
- Instead, they configure divisors used to calculate said clocks. This
- patch renames the defines according to their real function.
- Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit a11c0b85dc3664bb3c1e781137118730c8f619ab
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sun May 27 16:51:48 2007 +0200
- Motion-PRO: Add LED support.
- Signed-off-by: Jan Wrobel <wrr@semihalf.com>
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Acked-by: Bartlomiej Sieka <tur@semihalf.com>
- commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
- Author: Ulf Samuelsson <ulf@atmel.com>
- Date: Thu May 24 12:12:47 2007 +0200
- [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
- Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d756894722c888d09a9fa1df8323753772d3dcce
- Author: Stefan Roese <sr@denx.de>
- Date: Thu May 24 09:49:00 2007 +0200
- ppc4xx: Fix small 405EZ OCM initilization bug in start.S
- As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
- fixes a small bug in the 405EZ OCM initialization. Thanks for
- spotting.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5d4a179013d59a76446462e1eb0a969fba63eb81
- Author: Stefan Roese <sr@denx.de>
- Date: Thu May 24 08:22:09 2007 +0200
- ppc4xx: Update AMCC Acadia support for board revision 1.1
- This patch updates the Acadia (405EZ) support for the new 1.1 board
- revision. It also adds support for NAND FLASH via the 4xx NDFC.
- Please note that the jumper J7 must be in position 2-3 for this
- NAND support. Position 1-2 is for NAND booting only. NAND booting
- support will follow later.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 822d55365bb557e084d0e33625a6dedcc866110b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed May 23 14:09:46 2007 -0500
- Add LIST_86xx MAKEALL target for PowerPC builds.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 9f0077abd69f7a7c756a915b961037302be3e6f2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue May 22 12:48:09 2007 +0200
- ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6f3dfc139a838b0841c151efe00ad47db2366e79
- Author: Stefan Roese <sr@denx.de>
- Date: Tue May 22 12:46:10 2007 +0200
- ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
- This patch adds support for 405 PPC's to the 4xx NAND driver
- ndfc.c. This is in preparation for the new AMCC 405EZ.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 10603d76767426be803dadd4fb688b97eb69481c
- Author: Stefan Roese <sr@denx.de>
- Date: Mon May 21 07:41:22 2007 +0200
- ppc4xx: Fix problem in 405EZ OCM initialization
- As spotted by Bruce Adler this patch fixes an initialization problem
- for the 405EZ OCM.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Fri May 18 16:47:03 2007 +0100
- Reduce line lengths to 80 characters max.
- commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Fri May 18 14:34:07 2007 +0100
- Makefile permissions
- commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Fri May 18 14:33:11 2007 +0100
- Makefile permissions
- commit 255a3577c848706441daee0174543efe205a77f8
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed May 16 16:52:19 2007 -0500
- Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
- For all practical u-boot purposes, TSECs don't differ throughout the
- mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 70124c2602ae2d4c5d3dba05b482d91548242de8
- Author: Stefano Babic <sbabic@denx.de>
- Date: Wed May 16 14:49:12 2007 +0200
- Fix compile problem cause my Microblaze merge
- Signed-off-by: Stefano Babic <sbabic@denx.de>
- commit ada4697d0230d6da552867777f98a67ec3ba2579
- Author: Jeffrey Mann <mannj@embeddedplanet.com>
- Date: Wed May 16 13:23:10 2007 +0200
- [PATCH] Run new sequoia boards with an EBC speed of 83MHz
- Because the Sequoia board does not boot with an EBC faster than 66MHz,
- the clock divider are changed after the initial boot process.
- This allows for maximum clocking speeds to be achieved on newer boards.
- Sequoia boards with 666.66 MHz processors require that the EBC divider
- be set to 3 in order to start the initial boot process at a slower EBC
- speed. After the initial boot process, the divider can be set back to 2,
- which will cause the boards to run at 83.333MHz. This is backward
- compatible with boards with 533.33 MHz processors, as these boards will
- already be set with an EBC divider of 2.
- Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- commit a7676ea7732f3c596805079fed7e5c9fac652cfc
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 16 01:16:53 2007 +0200
- Minor Coding Style cleanup, update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit d62f64cc23a940eafe712c776b3249e4160753d1
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed May 16 00:13:33 2007 +0200
- Coding Style Cleanup, new CHANGELOG
- commit 3162eb836903c8b247fdc7470dd39bfa6996f495
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue May 15 23:38:05 2007 +0200
- Minor coding style cleanup.
- commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
- Author: mushtaq khan <mushtaq_k@procsys.com>
- Date: Fri Apr 20 14:23:02 2007 +0530
- Add driver for S-ATA-controller on Intel processors with South
- Bridge, ICH-5, ICH-6 and ICH-7.
- Implementation:
- 1. Code is divided in to two files. All functions, which are
- controller specific are kept in "drivers/ata_piix.c" file and
- functions, which are not controller specific, are kept in
- "common/cmd_sata.c" file.
- 2. Reading and Writing from the S-ATA drive is done using PIO method.
- 3. Driver can be configured for 48-bit addressing by defining macro
- CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
- addressing.
- 4. S-ATA read function is hooked to the File system, commands like
- ext2ls and ext2load file can be used. This has been tested.
- 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
- controller and identifies the S-ATA drives connected to it.
- 6. U-Boot command "sata" is added, which is used to read/write, print
- partition table and get info about the drives present. This I have
- implemented in same way as "ide" command is implemented in U-Boot.
- 7. This driver is for S-ATA in native mode.
- 8. This driver does not support the Native command queuing and
- Hot-plugging.
- Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
- commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
- Author: mushtaq khan <mushtaq_k@procsys.com>
- Date: Mon Apr 30 15:57:22 2007 +0530
- Fixes bug clearing the bss section for i386
- Hi,
- There is a bug in the code of clearing the bss section for processor
- i386.(File: cpu/i386/start.S)
- In the code, bss_start addr (starting addr of bss section) is put into
- the register %eax, but the code which clears the bss section refers to
- the addr pointed by %edi.
- This patch fixes this bug by putting bss_start into %edi register.
- Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
- commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
- Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
- Date: Mon Apr 30 16:47:28 2007 -0500
- Add support for BCM5464 Quad Phy
- Added support for Broadcom's BCM5464 Quad Phy
- Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
- commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
- Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
- Date: Wed May 9 08:10:57 2007 +0800
- Search the exception table with linear algorithm
- Search the exception table with linear algorithm instead of
- bisecting algorithm.
- Because the exception table might be unsorted.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
- Author: Aubrey.Li <aubrey.adi@gmail.com>
- Date: Mon May 14 11:47:35 2007 +0800
- Fix compilation issues on MACOSX
- Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
- Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
- commit 56fd7162985c412317bbf763a225fba23c64fd31
- Author: Stephen Williams <steve@icarus.com>
- Date: Tue May 15 07:55:42 2007 -0700
- Fix for compile of JSE target
- The attached patch fixes the compile of the JSE board in the
- denx git as of 14 may 2007. It is an extremely simple patch,
- it just adds the missing define of CFG_SYSTEMACE_WIDTH.
- Fix to compile JSE against 20070514 git of u-boot
- commit 69df3c4da0c93017cceb25a366e794570bd0ed98
- Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
- Date: Sun May 13 21:01:03 2007 +0900
- sh: MS7750SE support.
- This adds support for the Hitachi MS7750SE.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
- Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
- Date: Sun May 13 20:58:00 2007 +0900
- sh: First support code of SuperH.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
- Author: Stefan Roese <sr@denx.de>
- Date: Fri May 11 12:01:49 2007 +0200
- ppc4xx: Add mtcpr/mfcpr access macros
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 343c48bd84606c4025c8a7c7263fda465d6e284c
- Author: Stefan Roese <sr@denx.de>
- Date: Fri May 11 12:01:06 2007 +0200
- ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
- Author: Piotr Kruszynski <ppk@semihalf.com>
- Date: Thu May 10 16:55:52 2007 +0200
- [Motion-PRO] Add MTD and JFFS2 support, also add default partition
- definition.
- commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed May 9 11:42:44 2007 +0100
- Add the board directory for SMN42
- commit 160131bf965785419626df6c388729fe0b597992
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed May 9 11:41:58 2007 +0100
- Add the files for the SMN42 board
- commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed May 9 11:40:34 2007 +0100
- Remove the deleted files for the SMN42 patch
- commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed May 9 11:37:56 2007 +0100
- New board SMN42 branch
- commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Wed May 9 10:24:38 2007 +0100
- Makefile permissions
- commit b84289b595731e8851df46e893845cc1322c9b9b
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Tue May 8 14:17:07 2007 -0500
- 8641hpcn: Fix Makefile after moving pixis to board/freescale.
- The OBJTREE != SRCTREE build scenario was broken.
- This fixes it.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue May 8 15:57:43 2007 +0200
- add: reading special purpose registers
- commit 1a50f164beb065f360fbddb76029607d6b099698
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue May 8 14:52:52 2007 +0200
- add: Microblaze V5 exception handling
- commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue May 8 14:39:11 2007 +0200
- add: FSL control read and write
- commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
- Author: Piotr Kruszynski <ppk@semihalf.com>
- Date: Tue May 8 13:05:44 2007 +0200
- [Motion-PRO] Add support for I2C, EEPROM and RTC.
- commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue May 8 10:23:56 2007 +0200
- [Motion-PRO] Add ATA support. Add CF-booting commands to the default
- environment.
- commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue May 8 09:39:12 2007 +0200
- [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
- eliminates networking problems in Linux (timeouts).
- commit 1f1369c34b629be94702684d41d3fddf0f6193e7
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue May 8 09:21:57 2007 +0200
- [Motion-PRO] Enable Flat Device Tree support and modify default environment
- to allow booting of FDT-expecting kernels.
- commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 23:58:31 2007 +0200
- new: USE_MSR_INTR support
- commit 008861a2f3ef2c062744d733787c7e530a1b8761
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Mon May 7 22:36:15 2007 +0200
- [MPC5xxx] There are networking problems on the Motion-PRO board with
- current PHY initalization code (tftp timeouts all the time). This commit
- temporarily disables PHY initalization sequence to make the networking
- operational, until a fix is found.
- commit abca901869c3760b6c5fecb825db6c1d91a78a93
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 7 22:10:36 2007 +0200
- Get rid of duplicated file (see include/configs/sbc8560.h instead)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon May 7 22:07:08 2007 +0200
- Get rid of duplicated file (see doc/README.SBC8560 instead)
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 19:43:10 2007 +0200
- fix: read and write MSR - repair number of parameters
- commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
- Author: Jeffrey Mann <mannj@embeddedplanet.com>
- Date: Mon May 7 19:42:49 2007 +0200
- [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
- A '3' got cut off in the formatting of the last patch to automatically
- change the clock speed of the system clock on sequoia board.
- Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 19:33:51 2007 +0200
- new: fsl interrupt support
- FSL_Has_data is connected to INTC.
- commit 792032baa7d625e34c981ab6df521911bd8dc861
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 19:30:12 2007 +0200
- fix: interrupt handler
- remove asm code
- commit f3f001a341ef185d0f13841be5b5dc3395aacc31
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 19:25:08 2007 +0200
- fix: remove asm code
- commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 19:12:43 2007 +0200
- fix: clean interrupt
- commit 42efed6130c8fcf7da881385b5427065d2801757
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 17:22:25 2007 +0200
- fix: interrupt handler for multiple sources
- commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
- Author: Michal Simek <monstr@monstr.eu>
- Date: Mon May 7 17:11:09 2007 +0200
- new: add writing to msr register
- commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon May 7 16:43:56 2007 +0200
- Fix an ancient CHANGELOG conflict
- commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
- Author: Timur Tabi <timur@freescale.com>
- Date: Sat May 5 08:12:30 2007 +0200
- 5xxx: write MAC address to mac-address and local-mac-address
- Some device trees have a mac-address property, some have local-mac-address,
- and some have both. To support all of these device trees, ftp_cpu_setup()
- should write the MAC address to mac-address and local-mac-address, if they
- exist.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
- Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
- Date: Sun Apr 29 14:01:54 2007 +0200
- [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
- MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
- message. Use PVR to distinguish between the two variants, and print proper CPU
- information.
- Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
- Author: Ladislav Michl <ladis@linux-mips.org>
- Date: Wed Apr 25 16:01:26 2007 +0200
- [PATCH] simplify silent console
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Acked-by: Stefan Roese <sr@denx.de>
- commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
- Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
- Date: Mon Apr 23 15:30:39 2007 +0200
- [PATCH] Avoid assigning PCI resources from zero address
- If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
- core complains and IDE drivers fails to work. Also, assigning zero to a BAR
- was illegal according to PCI 2.1 (the later revisions seem to have excluded the
- sentence about "0" being considered an invalid address) -- so, use a reasonable
- starting value of 0x1000 (that's what the most Linux archs are using).
- Alternatively, one might have fixed the calls to pci_set_region() individually
- (some code even seems to have taken care of this issue) but that would have
- been a lot more work. :-)
- Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
- Author: Jeffrey Mann <mannj@embeddedplanet.com>
- Date: Mon Apr 23 14:00:11 2007 +0200
- [patch] setenv(...) can delete environmentalvariables
- update setenv() function so that entering a NULL value for the
- variable's value will delete the environmental variable
- Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Apr 23 13:54:24 2007 +0200
- [patch] use unsigned char in smc91111 driver for mac
- the v_mac variable in the smc91111 driver is declared as a signed char ...
- this causes problems when one of the bytes in the MAC is "signed" like 0xE0
- because when it gets printed out, you get a display like:
- 0xFFFFFFE0 and that's no good
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit ffc50f9bb194343c6303517a517708457a5eb6b8
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat May 5 18:54:42 2007 +0200
- new: FSL and MSR support #2
- commit f7e2e0eb0668136305f78bb9c21be79b48a34247
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat May 5 18:27:16 2007 +0200
- new: FSL and MSR support
- commit 2f15278c2eb911c668b4fe562130b78cf554d139
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 5 18:23:11 2007 +0200
- Coding stylke cleanup; update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 5 18:05:02 2007 +0200
- Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat May 5 17:15:50 2007 +0200
- Make "file" command happy with some config.mk files; update CHANGELOG
- commit e3b8c78bc2489c27ae020986ef0eaca684866cef
- Author: Jeffrey Mann <mannj@embeddedplanet.com>
- Date: Sat May 5 08:32:14 2007 +0200
- ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
- The AMCC Secquoia board has been changed in a new revision from using a
- 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
- indicates the difference. This patch reads that bit and uses the correct
- clock speed for the board. This code is backward compatable will all
- prior boards. All prior boards will be read as 33.000.
- Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
- Author: Stefan Roese <sr@denx.de>
- Date: Sat May 5 08:29:01 2007 +0200
- ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
- Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
- for the 4k NAND boot image so define bus_frequency to 133MHz here
- which is save for the refresh counter setup.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2f550ab976405300f5b07bf2890800840d0aa05f
- Author: Timur Tabi <timur@freescale.com>
- Date: Sat May 5 08:12:30 2007 +0200
- 5xxx: write MAC address to mac-address and local-mac-address
- Some device trees have a mac-address property, some have local-mac-address,
- and some have both. To support all of these device trees, ftp_cpu_setup()
- should write the MAC address to mac-address and local-mac-address, if they
- exist.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit a79886590593ba1d667c840caa4940c61639f18f
- Author: Thomas Knobloch <knobloch@siemens.com>
- Date: Sat May 5 07:04:42 2007 +0200
- NAND: Wrong calculation of page number in nand_block_bad()
- In case that there is no memory based bad block table available the
- function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
- nand_block_bad() directly. When parameter 'getchip' is set to zero,
- nand_block_bad() will not right shift the offset to calculate the
- correct page number.
- Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri May 4 10:02:33 2007 +0200
- Fix initrd length corruption in bootm command.
- When using FDT Images, the length of an inital ramdisk was
- overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
- Patches by Timur Tabi & Johns Daniel.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu May 3 19:43:52 2007 -0500
- mpc83xx: fix trivial error in MAKEALL
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu May 3 16:34:41 2007 +0200
- Update board configuration for STX GP3SSA board:
- Enable hush shell, environment in flash rather in EEPROM,
- more user-friendly default environment, etc.
- The simple EEPROM environment can be selected easily in the board
- config file.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Apr 24 14:37:49 2007 +0200
- Cleanup STX GP3SSA code; fix build and compile problems.
- commit 35171dc04e028ecacc23ad916a66295472555dbf
- Author: Dan Malek <dan@embeddedalley.com>
- Date: Fri Jan 5 09:15:34 2007 +0100
- Add support for STX GP3SSA (stxssa) Board
- Signed-off-by Dan Malek, <dan@embeddedalley.com>
- commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed May 2 13:31:53 2007 +0200
- macb: Don't restart autonegotiation if we already have link
- Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
- link is already up.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 04fcb5d38bc90779cd9a710d60702075986f0e29
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed May 2 13:22:38 2007 +0200
- macb: Introduce a few barriers when dealing with DMA descriptors
- There were a few theoretical possibilities that the compiler might
- optimize away DMA descriptor reads and/or writes and thus cause
- synchronization problems with the hardware. Insert barriers where
- we depend on reads/writes actually hitting memory.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit ffa621a0d12a1ccd81c936c567f8917a213787a8
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sat Feb 24 01:08:13 2007 -0600
- Cleaned up some 85xx PCI bugs
- * Cleaned up the CDS PCI Config Tables and added NULL entries to
- the end
- * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
- * Fixed 85xx PCI code to assign powar region sizes based on the
- config values (rather than hard-coding them)
- * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 6743105988fc44d5b0d30388c790607835aae7a6
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Apr 23 02:54:25 2007 -0500
- Add support for the 8568 MDS board
- This included some changes to common files:
- * Add 8568 processor SVR to various places
- * Add support for setting the qe bus-frequency value in the dts
- * Add the 8568MDS target to the Makefile
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
- Author: David Updegraff <dave@cray.com>
- Date: Fri Apr 20 14:34:48 2007 -0500
- Add support for treating unknown PHYs as generic PHYs.
- When bringing up u-boot on new boards, PHY support sometimes gets
- neglected. Most PHYs don't really need any special support,
- though. By adding a generic entry that always matches if nothing
- else does, we can provide support for "unsupported" PHYs for the
- tsec.
- The generic PHY driver supports most PHYs, including gigabit.
- Signed-off-by: David Updegraff <dave@cray.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit a75af9bfd8fff0499efdbb90601cec5a2afef117
- Author: James Yang <James.Yang@freescale.com>
- Date: Wed Feb 7 15:28:04 2007 -0600
- Conditionalize 8641 Rev1.0 MCM workarounds
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
- Author: Timur Tabi <timur@freescale.com>
- Date: Mon Apr 30 13:59:50 2007 -0500
- Fix memory initialization on MPC8349E-mITX
- Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
- This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
- on some ITX boards, notably those with a revision 3.1 CPU.
- Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
- ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Acked-by: Michael Benedict <MBenedict@twacs.com>
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Mon Apr 30 15:26:21 2007 -0500
- mpc83xx: replace elaborate boottime verbosity with 'clocks' command
- and fix CPU: to align with Board: display text.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit c1ab82669d9525998c34e802a12cad662723f22a
- Author: James Yang <James.Yang@freescale.com>
- Date: Fri Mar 16 13:02:53 2007 -0500
- Rewrote picos_to_clk() to avoid rounding errors.
- Clarified that conversion is to DRAM clocks rather than platform clocks.
- Made function static to spd_sdram.c.
- Signed-off-by: James Yang <James.Yang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 8b39501d28754e72726ce7fb02310e56dbdf116a
- Author: Stefan Roese <sr@denx.de>
- Date: Sun Apr 29 14:13:01 2007 +0200
- ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
- Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
- Date: Sun Apr 29 14:01:54 2007 +0200
- [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
- MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
- message. Use PVR to distinguish between the two variants, and print proper CPU
- information.
- Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 5c5d3242935cf3543af01142627494434834cf98
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Apr 25 12:34:38 2007 -0500
- mpc83xx: minor fixups for 8313rdb introduction
- commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
- Author: Ladislav Michl <ladis@linux-mips.org>
- Date: Wed Apr 25 16:01:26 2007 +0200
- [PATCH] simplify silent console
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 144876a380f5756f57412caf74c1d6dc201dd796
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue Apr 24 23:01:02 2007 +0200
- [PATCH] MTD partition support, JFFS2 support
- commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Apr 24 14:03:45 2007 +0200
- ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Apr 23 02:37:47 2007 -0500
- Reworked 85xx speed detection code
- Changed the code to read the registers and calculate the clock
- rates, rather than using a "switch" statement.
- Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 81f481ca708ed6a56bf9c410e3191dbad581c565
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Apr 23 02:24:28 2007 -0500
- Enable 8544 support
- * Add support to the Makefile
- * Add 8544 configuration support to the tsec driver
- * Add 8544 SVR numbers to processor.h
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
- Author: Andy Fleming <afleming@freescale.com>
- Date: Fri Feb 23 17:12:25 2007 -0600
- Support 1G size on 8548
- e500v2 and newer cores support 1G page sizes.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
- Author: Andy Fleming <afleming@freescale.com>
- Date: Fri Feb 23 17:11:16 2007 -0600
- Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
- The other pagesz constants use one letter to specify order of
- magnitude. Also change the one reference to it in mpc8548cds/init.S
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 1f9a318cea14272edd10d63739e2d326c90f430e
- Author: Andy Fleming <afleming@freescale.com>
- Date: Fri Feb 23 16:28:46 2007 -0600
- Only set ddrioovcr for 8548 rev1.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
- Author: Andy Fleming <afleming@freescale.com>
- Date: Sat Feb 24 01:16:45 2007 -0600
- Tweak DDR ECC error counter
- Enable single-bit error counter when memory was cleared by ddr controller.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
- Author: Timur Tabi <timur@freescale.com>
- Date: Mon Feb 12 13:34:55 2007 -0600
- 85xx: write MAC address to mac-address and local-mac-address
- Some device trees have a mac-address property, some have local-mac-address,
- and some have both. To support all of these device trees, ftp_cpu_setup()
- should write the MAC address to mac-address and local-mac-address, if they
- exist.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Apr 23 01:44:44 2007 -0500
- Some 85xx cpu cleanups
- * Cleaned up the TSR[WIS] clearing
- * Cleaned up DMA initialization
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
- Author: Andy Fleming <afleming@freescale.com>
- Date: Mon Apr 23 01:32:22 2007 -0500
- Add cpu support for the 8544
- Recognize new SVR values, and add a few register definitions
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Acked-by: Andy Fleming <afleming@freescale.com>
- commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Apr 11 16:51:02 2007 -0500
- Add MPC8544DS basic port board files.
- Add board port under new board/freescale directory
- structure and reuse existing PIXIS FPGA support there.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Apr 11 16:50:57 2007 -0500
- Add MPC8544DS main configuration file.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
- Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
- Date: Wed Dec 27 22:07:15 2006 +0300
- Fix PCI I/O space mapping on Freescale MPC85x0ADS
- The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
- 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
- describing the local address window used for the PCI I/O space accesses -- fix
- this and carry over the necessary changes into the MPC8560ADS code since the
- PCI I/O space mapping was also broken for this board (by the earlier commit
- 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
- the PCI I/O space must be mapped to all the MPC85xx board config. headers.
- Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
- board/mpc8540ads/init.S | 4 ++--
- board/mpc8560ads/init.S | 4 ++--
- include/configs/MPC8540ADS.h | 5 ++---
- include/configs/MPC8541CDS.h | 2 +-
- include/configs/MPC8548CDS.h | 2 +-
- include/configs/MPC8560ADS.h | 8 ++++----
- 6 files changed, 12 insertions(+), 13 deletions(-)
- commit 96629cbabdb727d4a5e62542deefc01d498db6dc
- Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
- Date: Tue Dec 5 16:42:30 2006 +0800
- u-boot: Fix e500 v2 core reset bug
- The following patch fixes the e500 v2 core reset bug.
- For e500 v2 core, a new reset control register is added to reset the
- processor.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 63247a5acd58032e6cf33f525bc3923b467bac88
- Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
- Date: Wed Dec 20 11:01:00 2006 +0800
- u-boot: v2: Remove the fixed TLB and LAW entrynubmer
- Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
- entry number to control the loop. This can reduce the potential risk
- for the 85xx processor increasing its TLB adn LAW entry number.
- Signed-off-by: Swarthout Edward <swarthout@freescale.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
- Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
- Date: Mon Dec 18 17:01:04 2006 +0800
- u-boot: Fix the 85xxcds tsec bug
- Fix the 85xxcds tsec bug.
- When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 7337b237ffc4aaf1b9467024fe472a880d852598
- Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
- Date: Fri Dec 15 14:43:31 2006 +0800
- u-boot: Fix CPU2 errata on MPC8548CDS board
- This patch apply workaround of CPU2 errata on MPC8548CDS board.
- Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
- commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
- Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
- Date: Mon Dec 18 16:25:15 2006 +0800
- u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
- This patch disables MPC8548CDS 2T_TIMING for DDR by default.
- Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
- commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
- Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
- Date: Thu Dec 14 14:14:55 2006 +0800
- u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
- Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
- board.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 96b8a05432f346f36493535c85320b70ec9c7c1b
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:54:15 2007 -0500
- mpc83xx: Add MPC8313ERDB support.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 49ea3b6eafe606285ae4d5c378026153dde53200
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:34:21 2007 -0500
- mpc83xx: Add generic PCI setup code.
- Board code can now request the generic setup code rather than having to
- copy-and-paste it for themselves. Boards should be converted to use this
- once they're tested with it.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:34:19 2007 -0500
- mpc83xx: Add 831x support to speed.c.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:34:18 2007 -0500
- mpc83xx: Add 831x support to global_data.h
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:34:16 2007 -0500
- mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
- Rather than misleadingly define PVR_83xx as the specific type of 83xx
- being built for, the PVR of each core revision is defined. checkcpu() now
- prints the core that it detects, rather than aborting if it doesn't find
- what it thinks it wants.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:34:15 2007 -0500
- mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit d87c57b201b4572d16f1b642998faa00c9912b16
- Author: Scott Wood <scottwood@freescale.com>
- Date: Mon Apr 16 14:31:55 2007 -0500
- mpc83xx: Add register definitions for MPC831x.
- Signed-off-by: Scott Wood <scottwood@freescale.com>
- commit 7fc4c71a143be8666d70803fb25ae60379c95622
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Apr 23 15:39:59 2007 +0200
- Fix file mode
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 38257988abfe74d459ca2ad748b109ca04e4efe1
- Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
- Date: Mon Apr 23 15:30:39 2007 +0200
- [PATCH] Avoid assigning PCI resources from zero address
- If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
- core complains and IDE drivers fails to work. Also, assigning zero to a BAR
- was illegal according to PCI 2.1 (the later revisions seem to have excluded the
- sentence about "0" being considered an invalid address) -- so, use a reasonable
- starting value of 0x1000 (that's what the most Linux archs are using).
- Alternatively, one might have fixed the calls to pci_set_region() individually
- (some code even seems to have taken care of this issue) but that would have
- been a lot more work. :-)
- Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit afb903a2eb9436baa9270ccc0c27082d86497d89
- Author: Jeffrey Mann <mannj@embeddedplanet.com>
- Date: Mon Apr 23 14:00:11 2007 +0200
- [patch] setenv(...) can delete environmentalvariables
- update setenv() function so that entering a NULL value for the
- variable's value will delete the environmental variable
- Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- Acked-by: Stefan Roese <sr@denx.de>
- commit 36f104e5caa747d568eff26b369565af57c2ffa6
- Author: Mike Frysinger <vapier@gentoo.org>
- Date: Mon Apr 23 13:54:24 2007 +0200
- [patch] use unsigned char in smc91111 driver for mac
- the v_mac variable in the smc91111 driver is declared as a signed char ...
- this causes problems when one of the bytes in the MAC is "signed" like 0xE0
- because when it gets printed out, you get a display like:
- 0xFFFFFFE0 and that's no good
- Signed-off-by: Mike Frysinger <vapier@gentoo.org>
- commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
- Author: Rodolfo Giometti <giometti@enneenne.com>
- Date: Mon Apr 23 13:10:52 2007 +0200
- USB: (Another) delay for crappy USB keys.
- Some USB keys are slow in giving back an answer when the Root HUB
- enables power lines.
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Apr 23 12:00:22 2007 +0200
- Remove BOARDLIBS usage completely
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 32556443840f127170e4baa8bdd5b567039f6c36
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Apr 21 21:07:22 2007 +0200
- [PATCH] SystemACE support for Microblaze
- commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Apr 21 21:02:40 2007 +0200
- 16bit read/write little endian
- commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sat Apr 21 20:53:31 2007 +0200
- Change ML401 parameters - Xilinx BSP
- commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Feb 28 05:37:29 2007 -0600
- mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Fri Jan 19 10:42:37 2007 +0800
- Enable LAWs for MPC8641 PCI-Ex2.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit bd7851ce1e1f140665b520026abf1042968b1102
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Apr 20 14:12:26 2007 -0500
- mpc86xx; Write MAC address to mac-address and local-mac-address
- Some device trees have a mac-address property, some have local-mac-address,
- and some have both. To support all of these device trees, ftp_cpu_setup()
- should write the MAC address to mac-address and local-mac-address, if they
- exist.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7dbdf28b8bd855a8530dc3292e4982575a197060
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Apr 20 14:11:38 2007 -0500
- mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 14da5f7675bbb427c469e3f45006e027b6e21db9
- Author: Wolfgang Denk <wd@denx.de>
- Date: Fri Apr 20 17:43:28 2007 +0200
- Cleanup compiler warnings, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 6923565db12af34fd5e02d354ee65a8c78ac460f
- Author: Detlev Zundel <dzu@denx.de>
- Date: Fri Apr 20 12:01:47 2007 +0200
- Fix breakage of NC650 board with respect to nand support.
- Signed-off-by: Detlev Zundel <dzu@denx.de>
- commit 39f23cd90947639ac278a18ff277ec786b5ac167
- Author: Domen Puncer <domen.puncer@telargo.com>
- Date: Fri Apr 20 11:13:16 2007 +0200
- [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
- G2 core reference manual says decrementer and time base
- are decreasing/increasing once every 4 bus clock cycles.
- Lets fix it, so time in Linux won't run twice as fast
- Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Thu Apr 19 23:14:39 2007 -0400
- Fix serious pointer bug with bootm and reserve map.
- What was suppose to be a stack variable was declared as a pointer,
- overwriting random memory.
- Also moved the libfdt.a requirement into the main Makefile. That is
- The U-Boot Way.
- commit d21686263574e95cb3e9e9b0496f968b1b897fdb
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Apr 19 09:53:52 2007 +0200
- ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
- Previous versions used full wait states for the chip select #1 which
- is connected to the Xilinix SystemACE controller on the AMCC Katmai
- evaluation board. This leads to really slow access and therefore low
- performance. This patch now sets up the chip select a lot faster
- resulting in much better read/write performance of the Linux driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 37837828d89084879bee2f2b8c7c68d4695940df
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 18 17:49:29 2007 +0200
- Clenaup, update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 18 17:20:58 2007 +0200
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 18 17:07:26 2007 +0200
- Cleanup, update CHANGELOG
- Sigend-off-by: Wolfgang Denk <wd@denx.de>
- commit 5f6c732affea9647762d27a4617a2ae64c52dceb
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 18 16:17:46 2007 +0200
- Update CHANGELOG
- commit ad4eb555671d97f96dc56eab55103b1f86874b01
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 18 14:30:39 2007 +0200
- MCC200 board: remove warning which is obsolete after PSoC firmware changes
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 3747a3f010b2b1442dec3e871c69788b6017aaae
- Author: Domen Puncer <domen.puncer@telargo.com>
- Date: Wed Apr 18 12:11:05 2007 +0200
- [PATCH] icecube/lite5200b: document wakeup from low-power support
- Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
- commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 18 12:07:47 2007 +0200
- ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Apr 18 12:05:59 2007 +0200
- ppc4xx: Add output for bootrom location to 405EZ ports
- Now 405EZ ports also show upon bootup from which boot device
- they are configured to boot:
- U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
- CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
- Bootstrap Option E - Boot ROM Location EBC (32 bits)
- 16 kB I-Cache 16 kB D-Cache
- Board: Acadia - AMCC PPC405EZ Evaluation Board
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
- Author: Peter Pearse <peter.pearse@arm.com>
- Date: Tue Apr 17 13:30:33 2007 +0100
- Move ppearse to ARM board list
- Add Konstantin Kletschke for scb9328.
- Signed-off-by: Peter Pearse <peter.pearse@arm.com>
- commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
- Author: Domen Puncer <domen.puncer@telargo.com>
- Date: Mon Apr 16 14:00:13 2007 +0200
- [PATCH] icecube/lite5200b: wakeup from low-power support
- U-Boot part of Lite5200b low power mode support.
- Puts SDRAM out of self-refresh and transfers control to
- address saved at physical 0x0.
- Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sun Apr 15 13:54:26 2007 -0400
- Fix the ft_cpu_setup() property settings.
- Use "setter" functions instead of flags, cleaner and more flexible.
- It also fixes the problem noted by Timur Tabi that the ethernet MAC
- addresses were all being set incorrectly to the same MAC address.
- commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Apr 14 22:51:24 2007 -0400
- Improve the bootm command for CONFIG_OF_LIBFDT
- In bootm, create the "/chosen" node only if it doesn't already exist
- (better matches the previous behavior).
- Update for proper reserved memory map handling for initrd.
- commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Apr 14 22:46:41 2007 -0400
- Add some utilities to manipulate the reserved memory map.
- commit 8048cdd56f04a756eeea4951f402bf5cc33785db
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Apr 14 21:16:54 2007 +0200
- Update CHANGELOG
- commit 8e6875183cdca91c134408d119d4abcd48ef6856
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 18:56:46 2006 +0100
- AVR32: Enable MMC support
- Set up the portmux for the MMC interface and enable the MMC driver
- along with support for DOS partitions, ext2 and FAT filesystems.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit fc26c97bb6df41b4a95662c34054fe912387bf38
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Jan 20 10:03:53 2006 +0100
- Atmel MCI driver
- Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
- The AT91 ARM-based CPUs use basically the same hardware, so it should
- be possible to share this driver, but no effort has been made so far.
- Hardware documentation can be found in the AT32AP7000 data sheet,
- which can be downloaded from
- http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 18:55:37 2006 +0100
- AVR32: Add clk and gpio infrastructure for mmci
- Implement functions for configuring the mmci pins, as well as
- functions for getting the clock rate of the mmci controller.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 7fac3f69e9f05c5e5326681976c35d129324c4de
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 18:53:56 2006 +0100
- Enable partition support with MMC
- Include implementations of init_part() and get_partition_info() when
- CONFIG_MMC is set.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 17:14:30 2006 +0100
- AVR32: Enable networking
- Implement MACB initialization for AVR32 and ATSTK1000, and turn
- everything on, including the MACB driver.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Fri Jan 20 10:03:34 2006 +0100
- Atmel MACB ethernet driver
- Driver for the Atmel MACB on-chip ethernet controller.
- This driver has been tested on the ATSTK1000 board with a AT32AP7000
- CPU. It should probably work on AT91SAM926x as well with some minor
- modifications.
- Hardware documentation can be found in the AT32AP7000 data sheet,
- which can be downloaded from
- http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 16:56:14 2006 +0100
- AVR32: Add clk and gpio infrastructure for macb0 and macb1
- Implement functions for configuring the macb0 and macb1 pins, as
- well as functions for getting the clock rate of the various
- busses the macb ethernet controllers are connected to.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit d5acb95b16a0a74c643524342c3437e765426d05
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 15:39:15 2006 +0100
- AVR32: Implement simple DMA memory allocator
- Implement dma_alloc_coherent() which returns cache-aligned
- uncacheable memory.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 91975b0fea773c9e681fea8cf3349669f27685ee
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 15:46:02 2006 +0100
- Import <linux/mii.h> from the Linux kernel
- Instead of creating yet another set of MII register definitions
- in the macb driver, here's a complete set of definitions for everyone
- to use.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 1b804b229556a4d862da93c0ec94e79419364b2c
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed Mar 21 19:47:36 2007 +0100
- AVR32: Include more commands for ATSTK1000
- Include the imi, imls and jffs commands sets by default on ATSTK1000.
- Also define CONFIG_BOOTARGS to something more useful, define
- CONFIG_BOOTCOMMAND and enable autoboot by default.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed Mar 21 19:44:48 2007 +0100
- AVR32: Provide a definition of struct stat
- Copy the definition of struct stat from the Linux kernel.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 12f099c08167a7a51aeee623bc16dafd0841271c
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Dec 17 14:46:06 2006 +0100
- AVR32: Use initdram() instead of board_init_memories()
- Conform to the "standard" interface and use initdram() instead of
- board_init_memories() on AVR32. This enables us to get rid of the
- sdram_size member of the global_data struct as well.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Mon Nov 20 15:53:10 2006 +0100
- AVR32: Relocate u-boot to SDRAM
- Relocate the u-boot image into SDRAM like everyone else does. This
- means that we can handle much larger .data and .bss than we used to.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit df548d3c3e2bbc40258713167859ffc2ce99a900
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sun Nov 19 18:06:53 2006 +0100
- AVR32: Resource management rewrite
- Rewrite the resource management code (i.e. I/O memory, clock gating,
- gpio) so it doesn't depend on any global state. This is necessary
- because this code is heavily used before relocation to RAM, so we
- can't write to any global variables.
- As an added bonus, this makes u-boot's memory footprint a bit smaller,
- although some functionality has been left out; all clocks are enabled
- all the time, and there's no checking for gpio line conflicts.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Nov 18 18:01:13 2006 +0100
- AVR32: Clean up memory-map.h for at32ap7000
- Convert spaces to tabs (must have missed this one last time around),
- sort the entries by address and group them together by bus
- connectivity.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 28c699ef69f4b6cdf252e4747b7b590028a88981
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Nov 18 17:32:31 2006 +0100
- AVR32: Build position-independent u-boot
- Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
- position independent. This will make relocation a lot easier.
- -mno-init-got means that gcc shouldn't emit code to load the GOT
- address into r6 in every function prologue. We do it once and for
- all in the early startup assembly code, so enabling this option
- makes u-boot a bit faster and smaller.
- The assembly parts have always been position-independent, so no code
- changes should be necessary.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Nov 18 17:24:31 2006 +0100
- AVR32: Use avr32-linux- cross-compilation prefix by default
- It doesn't really matter which toolchain you use to compile u-boot,
- but the avr32-linux one is probably what most people have installed.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Sat Nov 18 17:15:30 2006 +0100
- AVR32: Split start_u_boot into board_init_f and board_init_r
- Split the avr32 initialization code into a function to run before
- relocation, board_init_f and a function to run after relocation,
- board_init_r. For now, board_init_f simply calls board_init_r
- at the end.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Sat Apr 14 05:26:48 2007 +0200
- [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
- clear the Display after reset.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
- Author: Denis Peter <d.peter@mpl.ch>
- Date: Fri Apr 13 09:13:33 2007 +0200
- [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
- Fix bug introduced by "Fix get_partition_info() parameter error in all
- other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
- to use diskboot or scsiboot form another device than 0.
- Signed-off-by: Denis Peter <d.peter@mpl.ch>
- commit 0b94504d22e70f537c17a0d38c87edb6e370977d
- Author: Greg Lopp <lopp@pobox.com>
- Date: Fri Apr 13 08:02:24 2007 +0200
- [PATCH] Fix use of "void *" for block dev read/write buffer pointers
- Signed-of-by: Greg Lopp <lopp@pobox.com>
- Acked-by: Grant Likely <grant.likely@secretlab.ca>
- commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
- Author: Xie Xiaobo <r63061@freescale.com>
- Date: Fri Mar 9 19:08:25 2007 +0800
- Fix two bugs for MPC83xx DDR2 controller SPD Init
- There are a few bugs in the cpu/mpc83xx/spd_sdram.c
- the first bug is that the picos_to_clk routine introduces a huge
- rounding error in 83xx.
- the second bug is that the mode register write recovery field is
- tWR-1, not tWR >> 1.
- commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
- Author: Jeffrey Mann <mannj@embeddedplanet.com>
- Date: Thu Apr 12 14:15:59 2007 +0200
- ppc4xx: Fix i2c divisor calcularion for PPC4xx
- This patch fixes changes the i2c_init(...) function to use the function
- get_OPB_freq() rather than calculating the OPB speed by
- sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
- specific per processor. The prior method was not and so was calculating
- the wrong speed for some PPC4xx processors.
- Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 11 17:25:01 2007 +0200
- Update CHANGELOG
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 51056dd9863e6a1bc363afbbe1775c58cd967418
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 11 17:22:55 2007 +0200
- Update for SC3 board
- * Make IDE timeout configurable through ide_reset_timeout variable.
- * Use Newline as "password" string
- * Use just a single partition in NAND flash
- commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Mon Jan 22 12:37:30 2007 -0600
- Add PIXIS FPGA support for MPC8641HPCN board.
- Move the 8641HPCN's PIXIS code to the new directory
- board/freescale/common/ as it will be shared by
- future boards not in the same processor family.
- Write a "pixis_reset" command that utilizes the FPGA
- reset sequencer to support alternate soft-reset options
- such as using the "alternate" flash bank, enabling
- the watch dog, or choosing different CPU frequencies.
- Add documentation for the pixis_reset to README.mpc8641hpcn.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Fri Apr 6 14:19:43 2007 -0400
- Moved fdt command support code to fdt_support.c
- ...in preparation for improving the bootm command's handling of fdt blobs.
- Also cleaned up some coding sloppiness.
- commit 6679f9299534e488a171a9bb8f9bb891de247aab
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Fri Apr 6 14:17:14 2007 -0400
- libfdt: Make fdt_check_header() public
- Changed _fdt_check_header() to fdt_check_header() and made it part of
- the interface - it is a useful routine.
- Also did some asthetics cleanup to the include files (headers).
- commit c0707ce65677650b5ceab0500ee50ae5168afef2
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:34:06 2007 +0800
- [Blackfin][PATCH] Kill off a bunch of common local prototypes
- commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:33:04 2007 +0800
- [Blackfin][PATCH] Fix dynamic CPLB generation issue
- commit 0445e3a264251d75b1be45ef713c70726a2952f0
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:31:47 2007 +0800
- [Blackfin][PATCH] minior cleanup
- commit 155fd766573981090e638b493d5857562151862e
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:31:18 2007 +0800
- [Blackfin][PATCH] Fix copyright and update license
- commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:30:25 2007 +0800
- [Blackfin][PATCH] Add BF537 EMAC driver initialization
- commit 889256e8604e0c68db1d866d720894dffede9df6
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:29:55 2007 +0800
- [Blackfin][PATCH] call real the system synchronize instruction
- commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:29:17 2007 +0800
- [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
- commit dfeeab2cd680df047e68e723b246adf6f33bb556
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Thu Apr 5 18:28:34 2007 +0800
- [Blackfin][PATCH]: fix flash unaligned copy issue
- commit 443feb740584e406efa203af909fe2926608e8d5
- Author: Igor Marnat <marny@rambler.ru>
- Date: Wed Mar 21 09:55:01 2007 +0300
- Update usage of 'nc' in README.NetConsole
- Added information about usage of NetConsole on systems where the -l and -p
- switches are mutually exclusive.
- Signed-off-by: Igor Marnat <marny@rambler.ru>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 31c98a88228021b314c89ebb8104fb6473da4471
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 4 02:09:30 2007 +0200
- Minor coding style cleanup.
- commit 94abd7c0583ebe01e799b25f451201deeaab550d
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Apr 4 01:49:15 2007 +0200
- Minor cleanup.
- commit 822af351ad2babc7d99033361a5fcacd30f6bc78
- Author: Rodolfo Giometti <giometti@enneenne.com>
- Date: Tue Apr 3 14:27:18 2007 +0200
- Support for the Philips ISP116x HCD (Host Controller Driver)
- Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
- commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue Apr 3 14:27:08 2007 +0200
- USB: cleanup monahans usb support. Remove dead code.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit a65c5768e5537530bd1780af3d3fddc3113a163c
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Apr 2 10:09:30 2007 +0200
- ppc4xx: Change SysACE address on Katmai
- With this new base address of the Xilinx SystemACE controller
- the Linux driver will be easier to adapt, since it can now be
- mapped via the "normal" ioremap() call.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 14:30:53 2007 -0400
- Fix some minor whitespace violations.
- commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 12:23:51 2007 -0400
- Add a flattened device tree (fdt) command (2 of 2)
- Modifications to the existing code to support the new fdt command.
- commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 12:22:10 2007 -0400
- Add a flattened device tree (fdt) command (1 of 2)
- The fdt command uses David Gibson's libfdt library to manipulate as well
- as print the flattened device tree. This patch is the new command,
- the second part is the modifications to the existing code.
- commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 12:13:43 2007 -0400
- libfdt: Enhanced and published fdt_next_tag()
- Enhanced the formerly private function _fdt_next_tag() to allow stepping
- through the tree, used to produce a human-readable dump, and made
- it part of the published interface.
- Also added some comments.
- commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 12:05:39 2007 -0400
- libfdt: Customizations for use by u-boot.
- Changes to David Gibson's original source to fit into u-boot's
- environment. No functionality changes.
- commit 35748177c64a4a83a00057e93bb33e40278a2a96
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 12:00:56 2007 -0400
- libfdt: Import libfdt source (2 of 2)
- This adds the applicable libfdt source files (unmodified) and a README
- to explain where the source came from.
- commit 7cd5da0fe877e7171a4cdd44880bce783132871a
- Author: Gerald Van Baren <vanbaren@cideas.com>
- Date: Sat Mar 31 11:59:59 2007 -0400
- libfdt: Import libfdt source (1 of 2)
- This adds the applicable libfdt source files (unmodified) and a README
- to explain where the source came from.
- commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 31 13:16:23 2007 +0200
- ppc4xx: Update Katmai bootstrap command
- Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
- is selected.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cabee756a6532986729477c3cc1ea16ef8517ad2
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 31 13:15:06 2007 +0200
- ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
- Additional RAM information is now printed upon powerup, like
- DDR2 frequency and CAS latency.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 60723803431ac75cad085690789e433d5ab9174e
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 31 08:48:36 2007 +0200
- ppc4xx: Change Yucca config file to support ECC
- With the updated 44x DDR2 driver the Yucca board now supports
- ECC generation and checking.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 490e5730c674b20d708b783a2c5ffd7208f83873
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 31 08:47:34 2007 +0200
- ppc4xx: Fix "bootstrap" command for Katmai board
- The board specific "bootstrap" command is now fixed and can
- be used for the AMCC Katmai board to configure different
- CPU/PLB/OPB frequencies.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 31 08:46:08 2007 +0200
- ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
- Fix a bug in the auto calibration routine. This driver now runs
- more reliable with the tested modules. It's also tested with
- 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 342cd097be1e7affe82f42ab3da220959a699e64
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 30 22:52:09 2007 +0200
- [PATCH] Clean include dependence
- commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
- Author: Michal Simek <monstr@monstr.eu>
- Date: Fri Mar 30 22:42:45 2007 +0200
- [CLEAN] Remove inefficient Suzaku code
- commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 28 15:03:16 2007 +0200
- Merge some AMCC make targets to keep the top-level Makefile smaller
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 28 14:52:12 2007 +0200
- i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
- The "old" i2c commands (iprobe, imd...) are now compiled in again,
- even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
- config option.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
- Author: Michal Simek <monstr@monstr.eu>
- Date: Tue Mar 27 00:32:16 2007 +0200
- PATCH: Resolve GPL license problem
- commit ae00bb4b2944dc64a485ed72a19754b11af7c223
- Author: Rodolfo Giometti <giometti@enneenne.com>
- Date: Mon Mar 26 12:03:36 2007 +0200
- PXA: pxa27x USB OHCI support
- Signed-off-by: Rodolfo Giometti <giometti@linux.it>
- commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon Mar 26 11:21:05 2007 +0200
- USB: remove the S3C24X0_merge #define, which was introduced while
- merging OHCI drivers.
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 1798049522f594013aea29457d46794298c6ae15
- Author: Michal Simek <root@monstr.eu>
- Date: Mon Mar 26 01:39:07 2007 +0200
- Support for XUPV2P board
- Reset support
- BSP autoconfig support
- commit 0d974d5297349504a2ddfa09314be573b5df320a
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 24 15:57:09 2007 +0100
- [PATCH] Add 4xx GPIO functions
- This patch adds some 4xx GPIO functions. It also moves some of the
- common code and defines into a common 4xx GPIO header file.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 24 15:55:58 2007 +0100
- [PATCH] Small Sequoia cleanup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Mar 24 15:45:34 2007 +0100
- [PATCH] Clean up 40EZ/Acadia support
- This patch cleans up all the open issue of the preliminary
- Acadia support.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Dec 12 11:02:20 2006 -0600
- Fix 8641HPCN problem with ld version 2.16
- (Dot outside sections problem).
- This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Thu Dec 7 10:35:55 2006 -0600
- Set Rev 2.x 86xx PIC in mixed mode.
- Prevent false interrupt from hanging Linux as MSR[EE] is set
- to enable interrupts by changing the PIC out of the default
- pass through mode into mixed mode.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
- Author: Jason Jin <jason.jin@freescale.com>
- Date: Thu Dec 7 10:32:35 2006 -0600
- Add flash cmd function to 8641HPCN ramboot
- Also fixes some commmand for 8641 HPCN ramboot case.
- Signed-off-by: Jason Jin <jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
- Author: Ed Swarthout <ed.swarthout@freescale.com>
- Date: Thu Dec 7 10:34:14 2006 -0600
- Add support for 8641 Rev 2 silicon.
- Without this patch, I am unable to get to the prompt on rev 2 silicon.
- Only set ddrioovcr for rev1.
- Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 44ba464b99001f8bd1c456a1e9d59726252f707a
- Author: Wolfgang Denk <wd@denx.de>
- Date: Thu Mar 22 00:13:12 2007 +0100
- Code cleanup / re-insert previous Copyright entries.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Mar 21 23:26:15 2007 +0100
- Code cleanup. Update CHANGELOG
- commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 21 14:54:29 2007 +0100
- ppc4xx: Fix file mode of include/configs/acadia.h
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d5f4614c9350d9333e575100fb250aab774d0258
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Wed Mar 21 14:41:46 2007 +0100
- SPC1920: fix small clock routing bug
- Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 21 13:39:57 2007 +0100
- [PATCH] Add AMCC Acadia (405EZ) eval board support
- This patch adds support for the new AMCC Acadia eval board.
- Please note that this Acadia/405EZ support is still in a beta stage.
- Still lot's of cleanup needed but we need a preliminary release now.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e01bd218b00af73499331a1a701625a852cd286f
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 21 13:38:59 2007 +0100
- [PATCH] Add AMCC PPC405EZ support
- This patch adds support for the new AMCC 405EZ PPC. It is in
- preparation for the AMCC Acadia board support.
- Please note that this Acadia/405EZ support is still in a beta stage.
- Still lot's of cleanup needed but we need a preliminary release now.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Wed Mar 21 08:45:17 2007 +0100
- [PATCH] TQM8272: dont change the bits given from the HRCW
- for the SIUMCR and BCR Register.
- Fix the calculation for the EEprom Size
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 654589873dbafcf104dff133ce0d03a4506e9cc3
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Tue Mar 20 18:16:24 2007 +0800
- [Blackfin][PATCH] Add BF561 EZKIT board support
- commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Mon Mar 19 22:55:58 2007 +0800
- [Blackfin][PATCH] minor cleanup
- commit 389b6bb50f745bf5038ce030300d8a8512e96f79
- Author: Wolfgang Denk <wd@denx.de>
- Date: Mon Mar 19 13:10:08 2007 +0100
- Remove obsoleted POST files.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Mon Mar 19 01:26:11 2007 +0800
- [PATCH] Add flash chip M29W320ET/B support
- commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Mon Mar 19 01:24:52 2007 +0800
- [Blackfin][PATCH] Add BF537 stamp board support
- commit 8423e5e31a7235d05a482627315fb11d49c17bd7
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Mar 16 21:11:42 2007 +0100
- [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
- Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
- DDR memory are dynamically programmed matching the total size
- of the equipped memory (DIMM modules).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 76d1466f918b881cda2d259254761e73885093c2
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Tue Mar 13 13:38:05 2007 +0100
- [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
- boards in terms of unification.
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Mar 13 16:05:55 2007 +0100
- Make SC3 board build with 'make O='; use 'addcons' consistently
- (SC3 and Jupiter used to use 'addcon' instead).
- Signed-off-by: Wolfgang Denk wd@denx.de
- commit 8502e30a28e492c756ea2d7df0ace026388fce4b
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Tue Mar 13 09:40:59 2007 +0100
- [PATCH] update board config for jupiter Board:
- added Hush Shell,
- CONFIG_CMDLINE_EDITING,
- CFG_ENV_ADDR_REDUND activated
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Mon Mar 12 12:11:55 2007 +0800
- [Blackfin][PATCH] minor cleanup
- commit bfa5754a58477ac917d21527cd0f079d87cf188e
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Mon Mar 12 01:42:06 2007 +0800
- [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
- commit 8440bb14581a294375c34b91b42512f9753d1130
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Mon Mar 12 00:25:14 2007 +0800
- [Blackfin][PATCH] code cleanup
- commit cfc67116a706fd18b8f6a9c11a16753c5626d689
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Mar 11 13:48:24 2007 +0100
- [Microblaze][PATCH] part 2
- timer support
- interrupt controller support
- flash support
- ethernet support
- cache support
- board information support
- env support
- booting image support
- adding support for Xilinx ML401
- commit 76316a318de91f6184e7c22a10e02d275ade2441
- Author: Michal Simek <monstr@monstr.eu>
- Date: Sun Mar 11 13:42:58 2007 +0100
- [Microblaze][PATCH]
- timer support
- interrupt controller support
- flash support
- ethernet support
- cache support
- board information support
- env support
- booting image support
- adding support for Xilinx ML401
- commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
- Author: Aubrey Li <aubrey.adi@gmail.com>
- Date: Sat Mar 10 23:49:29 2007 +0800
- [Blackfin][PATCH] code cleanup
- commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
- Author: Aubrey.Li <aubrey.adi@gmail.com>
- Date: Fri Mar 9 13:40:56 2007 +0800
- [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
- commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
- Author: Aubrey.Li <aubrey.adi@gmail.com>
- Date: Fri Mar 9 13:38:44 2007 +0800
- [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
- commit 992423ab43c2bcf6b704853bd00af77450915e20
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 8 23:00:08 2007 +0100
- ppc4xx: Fix file mode of sequoia.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit eb92f613556800f7483666db09d9a237ad911d4a
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Thu Mar 8 22:52:51 2007 +0100
- Minor cleanup.
- commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
- Author: John Otken john@softadvances.com <john@softadvances.com>
- Date: Thu Mar 8 09:39:48 2007 -0600
- ppc4xx: Clear Sequoia/Rainier security engine reset bits
- Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
- commit 650a330dd2539130c8c324791e2f9f75aed79d4e
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Mar 8 16:26:52 2007 +0100
- [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit d9fc703246840c4b268debf48c334ba55c597dc0
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Mar 8 16:25:47 2007 +0100
- [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit ced5b9029043397348cdc88e0cfcd6b1f629250b
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Mar 8 16:23:11 2007 +0100
- [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Thu Mar 8 16:20:32 2007 +0100
- [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit f9fc6a5852a6335840882fa2111925010eea1abe
- Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Date: Wed Mar 7 15:32:01 2007 +0100
- fixed ethernet phy configuration for plu405 board
- Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- commit 769104c9356594deb2092e204a39c05b33202d6c
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Thu Mar 8 21:49:27 2007 +0100
- Minor cleanup
- commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 8 10:13:16 2007 +0100
- [PATCH] Update AMCC Luan 440SP eval board support
- The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
- inititializition. This includes DDR auto calibration and support
- for different DIMM modules, instead of the fixed setup used in
- the earlier version.
- This patch also enables the cache in FLASH for the startup
- phase of U-Boot (while running from FLASH). After relocating to
- SDRAM the cache is disabled again. This will speed up the boot
- process, especially the SDRAM setup, since there are some loops
- for memory testing (auto calibration).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2f5df47351910a2936c7741cf111855829200943
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 8 10:10:18 2007 +0100
- [PATCH] Update AMCC Yucca 440SPe eval board support
- The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
- inititializition. This includes DDR auto calibration and support
- for different DIMM modules, instead of the fixed setup used in
- the earlier version.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2721a68a9ea91f1e494649ce68b2577261f578e2
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 8 10:07:18 2007 +0100
- ppc4xx: Small AMCC Katmai 440SPe update
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit df294497479b1dca6dd86318b2a912f72fede0df
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 8 10:06:09 2007 +0100
- ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 83853178bd36bca6f0f8f1331476620c84a587fc
- Author: Ed Swarthout <Ed.Swarthout@freescale.com>
- Date: Wed Mar 7 12:14:50 2007 -0600
- net - Support ping reply when processing net-loop
- Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
- This permits the ping command to test the phy interface when the phy
- is put in loopback mode (typically by setting register 0 bit 14).
- It also allows the port to respond to an external ping when u-boot is
- processing some other net command (such as tftp). This is useful when
- tftp appears to hang.
- Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit fa1aef15bcd47736687be1af544506e90fba545d
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 7 16:43:00 2007 +0100
- [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
- Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
- DDR memory are dynamically programmed matching the total size
- of the equipped memory (DIMM modules).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e2ebe696818939e2b974628be9c921ea3fe9de13
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Mar 7 16:39:36 2007 +0100
- [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
- This patch fixes a problem that occurs when 2 DIMM's are
- used. This problem was first spotted and fixed by Gerald Jackson
- <gerald.jackson@reaonixsecurity.com> but this patch fixes the
- problem in a little more clever way.
- This patch also adds the nice functionality to dynamically
- create the TLB entries for the SDRAM (tlb.c). So we should
- never run into such problems with wrong (too short) TLB
- initialization again on these platforms.
- As this feature is new to the "old" 44x SPD DDR driver, it
- has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 39218433983417b9df087976a79e3f80dd5e83d6
- Author: Wolfgang Denk <wd@denx.de>
- Date: Wed Mar 7 16:33:44 2007 +0100
- UC101: fix compiler warnings
- commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Mar 7 16:19:46 2007 +0100
- HMI1001: fix build error, cleanup compiler warnings.
- commit ad5bb451ade552c44bef9119d907929ebc2c126f
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Mar 6 18:08:43 2007 +0100
- Restructure POST directory to support of other CPUs, boards, etc.
- commit a5284efd125967675b2e9c6ef7b95832268ad360
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Mar 6 18:01:47 2007 +0100
- Fix HOSTARCH handling.
- Patch by Mike Frysinger, Mar 05 2007
- commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Mar 6 07:47:04 2007 +0100
- [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
- As provided by the AMCC applications team, this patch optimizes the
- DDR2 setup for 166MHz bus speed. The values provided are also save
- to use on a "normal" 133MHz PLB bus system. Only the refresh counter
- setup has to be adjusted as done in this patch.
- For this the NAND booting version had to include the "speed.c" file
- from the cpu/ppc4xx directory. With this addition the NAND SPL image
- will just fit into the 4kbytes of program space. gcc version 4.x as
- provided with ELDK 4.x is needed to generate this optimized code.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sun Mar 4 01:36:05 2007 +0100
- Some code cleanup.
- commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Feb 28 00:02:04 2007 -0600
- mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
- (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
- commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Feb 27 23:51:42 2007 -0600
- mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
- The config value for:
- * CFG_ACR_PIPE_DEP
- * CFG_ACR_RPTCNT
- * CFG_SPCR_TSEC1EP
- * CFG_SPCR_TSEC2EP
- * CFG_SCCR_TSEC1CM
- * CFG_SCCR_TSEC2CM
- Were not being used when setting the appropriate register
- Added:
- * CFG_SCCR_USBMPHCM
- * CFG_SCCR_USBDRCM
- * CFG_SCCR_PCICM
- * CFG_SCCR_ENCCM
- To allow full config of the SCCR.
- Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
- that were just bogus.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit d51b3cf371cd441030460ef19d36b2924c361b1a
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Feb 22 20:06:57 2007 -0600
- mpc83xx: update [local-]mac-address properties on UEC based devices
- 8360 and 832x weren't updating their [local-]mac-address
- properties. This patch fixes that.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- commit 61f4f912acbe60776c5e00df1ec94094ce672957
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Feb 13 10:41:42 2007 -0600
- mpc83xx: write MAC address to mac-address and local-mac-address
- Some device trees have a mac-address property, some have local-mac-address,
- and some have both. To support all of these device trees, this patch
- updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
- This function already updates local-mac-address.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 22d71a71f57fd5d38b27ac3848e50d790360a598
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Feb 27 18:41:08 2007 -0600
- mpc83xx: add command line editing by default
- commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Feb 14 19:50:53 2007 -0600
- mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
- Disable G1TXCLK, G2TXCLK h/w buffers. This patch
- fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
- Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
- Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
- commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
- Author: Xie Xiaobo <r63061@freescale.com>
- Date: Wed Feb 14 18:27:17 2007 +0800
- mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
- The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
- it pass DDR/DDR2 compliance tests.
- Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
- commit b110f40bd180c6b560276589beedf753e97c46ce
- Author: Xie Xiaobo <r63061@freescale.com>
- Date: Wed Feb 14 18:27:06 2007 +0800
- mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
- MPC8360E rev2.0 have new spridr,and PVR value,
- The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
- Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
- commit 8d172c0f0d85998a256a95b7459a5403a30380ed
- Author: Xie Xiaobo <r63061@freescale.com>
- Date: Wed Feb 14 18:26:44 2007 +0800
- mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
- MPC8349E rev3.1 have new spridr,and PVR value,
- The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
- Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
- commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
- Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
- Date: Wed Jan 31 11:04:19 2007 +0100
- mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
- Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
- which is used to se if an slave will ACK after receiving its address.
- Correct i2c probing to use this method as the old method could upset
- a slave as it wrote a data byte to it.
- Add a small delay in i2c_init() to let the controller
- shutdown any ongoing I2C activity.
- Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
- Author: Timur Tabi <timur@freescale.com>
- Date: Wed Jan 31 15:54:29 2007 -0600
- mpc83xx: Add support for the MPC8349E-mITX-GP
- Add support for the MPC8349E-mITX-GP, a stripped-down version of the
- MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
- HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit fab16807adad350f618024350c6950165c247c72
- Author: Timur Tabi <timur@freescale.com>
- Date: Wed Jan 31 15:54:20 2007 -0600
- mpc83xx: Delete sdram_init() for MPC8349E-mITX
- There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
- never does anything. This patch deletes it.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
- Author: Dave Liu <daveliu@freescale.com>
- Date: Fri Jan 19 10:43:26 2007 +0800
- mpc83xx: Fix the LAW1/3 bug
- The patch solves the alignment problem of the local bus access windows to
- render accessible the memory bank and PHY registers of UPC 1 (starting at
- 0xf801 0000). What we actually did was to adjust the sizes of the bus
- access windows so that the base address alignment requirement would be met.
- Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
- Signed-off-by: Gridish Shlomi <gridish@freescale.com>
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 97c4b397dce236a7318b304667bf89e59d08b17c
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 30 16:15:31 2007 -0600
- mpc83xx: don't hang if watchdog configured on 8360, 832x
- don't hang if watchdog configured on 8360, 832x
- The watchdog programming model is the same across all 83xx devices;
- make the code reflect that.
- commit b70047478570e371ce7223be342ce98afea0f7d6
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 30 16:15:21 2007 -0600
- mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
- protect memcpy to bad address if a local-mac-address is missing from dt
- commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Jan 30 16:15:04 2007 -0600
- mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
- make 8360 default environment fdt be 8360 (not 8349)
- commit a28899c910024a0226331df07207b1038c300c93
- Author: Emilian Medve <Emilian.Medve@freescale.com>
- Date: Tue Jan 30 16:14:50 2007 -0600
- mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
- The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
- be used for busy-waiting since it strips the 'volatile' property from
- the bd variable. gcc3 was working by pure luck.
- This is a follow on patch to "Fix the UEC driver bug of QE"
- commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Jan 30 14:08:30 2007 -0600
- mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
- The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
- MPC834X class processors. Change the protections from CONFIG_MPC8349 to
- CONFIG_MPC834X so they are more generic.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Jan 25 13:40:55 2007 -0600
- mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
- commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Jan 24 17:18:37 2007 -0600
- mpc83xx: sort Makefile targets
- reordered targets alphabetically
- commit 91e25769771c1164ed63ffca0add49f934ae3343
- Author: Paul Gortmaker <paul.gortmaker@windriver.com>
- Date: Tue Jan 16 11:38:14 2007 -0500
- mpc83xx: U-Boot support for Wind River SBC8349
- I've redone the SBC8349 support to match git-current, which
- incorporates all the MPC834x updates from Freescale since the 1.1.6
- release, including the DDR changes.
- I've kept all the SBC8349 files as parallel as possible to the
- MPC8349EMDS ones for ease of maintenance and to allow for easy
- inspection of what was changed to support this board. Hence the SBC8349
- U-Boot has FDT support and everything else that the MPC8349EMDS has.
- Fortunately the Freescale updates added support for boards using CS0,
- but I had to change spd_sdram.c to allow for board specific settings for
- the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
- default if the board doesn't specify a value.)
- Hopefully this should be mergeable as-is and require no whitespace
- cleanups or similar, but if something doesn't measure up then let me
- know and I'll fix it.
- Thanks,
- Paul.
- commit 05031db456ab227f3e3752f37b9b812b65bb83ad
- Author: Sam Song <samsongshu@yahoo.com.cn>
- Date: Thu Dec 14 19:03:21 2006 +0800
- mpc83xx: Remove a redundant semicolon in mpc8349itx.c
- A redundant semicolon existed in mpc8349itx.c
- should be removed.
- Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
- commit f35f358241c549be3f75cfe2eaa642914275b7ba
- Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
- Date: Wed Dec 6 21:23:55 2006 -0500
- mpc83xx: Put the version (and magic) after the HRCW.
- Put the version (and magic) after the HRCW. This puts it in a fixed
- location in flash, not at the start of flash but as close as we can get.
- Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
- commit 48aecd969171a6e99a55fae04933857787f9a5bd
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Dec 7 21:14:51 2006 +0800
- mpc83xx: Add the MPC832XEMDS board readme
- Add the MPC832XEMDS board readme
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 24c3aca3f1358b113d3215adb5433b156e99f72b
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Dec 7 21:13:15 2006 +0800
- mpc83xx: Add support for the MPC832XEMDS board
- This patch supports DUART, ETH3/4 and PCI etc.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit e080313c32322e15ab5a18eb896a252858c57284
- Author: Dave Liu <r63238@freescale.com>
- Date: Thu Dec 7 21:11:58 2006 +0800
- mpc83xx: streamline the 83xx immr head file
- For better format and style, I streamlined the 83xx head files,
- including immap_83xx.h and mpc83xx.h. In the old head files, 1)
- duplicated macro definition appear in the both files; 2) the structure
- of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
- macro definition put inside the each structure. So, I cleaned up the
- structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
- moved the macro definition to mpc83xx.h, Just like MPC8260.
- CHANGELOG
- *streamline the 83xx immr head file
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
- Author: Dave Liu <r63238@freescale.com>
- Date: Wed Dec 6 11:38:17 2006 +0800
- mpc83xx: Fix the UEC driver bug of QE
- The patch prevents the GCC tool chain from striping useful code for
- optimization. It will make UEC ethernet driver workable, Otherwise the
- UEC will fail in tx when you are using gcc4.x. but the driver can work
- when using gcc3.4.3.
- CHANGELOG
- *Prevent the GCC from striping code for optimization, Otherwise the UEC
- will tx failed when you are using gcc4.x.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 1 21:11:36 2007 +0100
- [PATCH] Update AMCC Katmai 440SPe eval board support
- This patch updates the recently added Katmai board support. The biggest
- change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
- driver.
- Please note, that still some problems are left with some memory
- configurations. See the driver for more details.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Mar 1 07:03:25 2007 +0100
- [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ccbc7036648e465697ca298ba51e0e76dda352a0
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Feb 28 01:28:53 2007 +0100
- SC3: fix typo in default environment
- commit e344568b1b46af85ec32d815586f91bc115d6223
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Tue Feb 27 20:15:30 2007 +0300
- MCC200: Fixes for update procedure
- - fix logic error in image type handling
- - make sure file system images (cramfs etc.) get stored in flash
- with image header stripped so they can be mounted through MTD
- commit 743571145b37182757d4e688a77860b36ee77573
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Feb 27 14:26:04 2007 +0100
- Minor code cleanup.
- commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Tue Feb 27 12:40:16 2007 +0300
- MCC200 update - add LCD Progress Indicator
- commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Feb 22 07:43:34 2007 +0100
- [PATCH] get_dev() now unconditionally uses manual relocation
- Since the relocation fix is not included yet and we're not sure how
- it will be added, this patch removes code that required relocation
- to be fixed for now.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Feb 22 07:40:23 2007 +0100
- [PATCH] Change systemace driver to select 8 & 16bit mode
- As suggested by Grant Likely this patch enables the Xilinx SystemACE
- driver to select 8 or 16bit mode upon startup.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Wed Feb 21 16:52:31 2007 +0100
- [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
- Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
- is fully finished. The sync() is defined in each CPU's io.h file. For
- those CPUs which do not need sync for now, a dummy sync() is defined in
- their io.h as well.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit da04995c7dc6772013a9a0dc5c767f190c402478
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Feb 21 13:44:34 2007 +0100
- [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 751bb57107d78978ae08e697c3deba816f5be091
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 13:21:57 2007 +0100
- [PATCH] Fix relocation problem with "new" get_dev() function
- This patch enables the "new" get_dev() function for block devices
- introduced by Grant Likely to be used on systems that still suffer
- from the relocation problems (manual relocation neede because of
- problems with linker script).
- Hopefully we can resolve this relocation issue soon for all platform
- so we don't need this additional code anymore.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d93e2212f962668b3dce091ff5edc33f2347fe37
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 13:17:42 2007 +0100
- [PATCH] Update SystemACE driver for 16bit access
- This patch removes some problems when the Xilinx SystemACE driver
- is used with 16bit access on an big endian platform (like the
- AMCC Katmai).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 13:15:40 2007 +0100
- [PATCH] Clean up Katmai (440SPe) linker script
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 10:57:08 2007 +0100
- [PATCH] Add support for the AMCC Katmai (440SPe) eval board
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 10:51:26 2007 +0100
- [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
- This patch switches to the desired I2C bus when the date/dtt
- commands are called. This can be configured using the
- CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 10:43:34 2007 +0100
- [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
- This patch adds support for the DDR2 controller used on the
- 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
- board and works fine with the following DIMM modules:
- - Corsair CM2X512-5400C4 (512MByte per DIMM)
- - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
- - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
- This patch also adds the nice functionality to dynamically
- create the TLB entries for the SDRAM (tlb.c). So we should
- never run into such problems with wrong (too short) TLB
- initialization again on these platforms.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 36d830c9830379045f5daa9f542ac1c990c70068
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 10:35:42 2007 +0100
- [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
- Since the existing 4xx SPD SDRAM initialization routines for the
- 405 SDRAM controller and the 440 DDR controller don't have much in
- common this patch splits both drivers into different files.
- This is in preparation for the 440 DDR2 controller support (440SP/e).
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Feb 20 10:27:08 2007 +0100
- [PATCH] PPC4xx: Add support for multiple I2C busses
- This patch adds support for multiple I2C busses on the PPC4xx
- platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
- to make use of this feature.
- It also merges the 405 and 440 i2c header files into one common
- file 4xx_i2c.h.
- Also the 4xx i2c reset procedure is reworked since I experienced
- some problems with the first access on the 440SPe Katmai board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit eb867a76238fb38e952c37871b16d0d7fd61c95f
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:45 2007 +0100
- [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
- Block device read/write is anonymous data; there is no need to use a
- typed pointer. void * is fine. Also add a hook for block_read functions
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 53758fa20e935cc87eeb0519ed365df753a6f289
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:38 2007 +0100
- [PATCH 8_9] Add block_write hook to block_dev_desc_t
- Preparation for future patches which support block device writing
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f4852ebe6ca946a509667eb68be42026f837be76
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:31 2007 +0100
- [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
- Register read/write does not need to be wrapped in a full function. The
- patch replaces them with macros.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:23 2007 +0100
- [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
- The code in this file is not a command; it is a device driver. Put it in
- the correct place. There are zero functional changes in this patch, it
- only moves the file.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:16 2007 +0100
- [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
- This patch is in preparation of additional changes to the sysace driver.
- May as well take this opportunity to fixup the inconsistent whitespace since
- this file is about to undergo major changes anyway.
- There are zero functional changes in this patch. It only cleans up the
- the whitespace.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 80ba981d940471fe7e539e64fa3d2bd80002beda
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:07 2007 +0100
- [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
- isprint is already defined in ctype.c
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:05:00 2007 +0100
- [PATCH 3_9] Move buffer print code from md command to common function
- Printing a buffer is a darn useful thing. Move the buffer print code
- into print_buffer() in lib_generic/
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:04:52 2007 +0100
- [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
- Change the xilinx device drivers and board code to include config.h
- instead of xparameters.h directly. config.h always includes the
- correct xparameters file. This change reduces the posibility of
- including the wrong file when adding a new xilinx board port
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Feb 20 09:04:34 2007 +0100
- [PATCH 1_4] Merge common get_dev() routines for block devices
- Each of the filesystem drivers duplicate the get_dev routine. This change
- merges them into a single function in part.c
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Mon Feb 19 23:09:51 2007 +0100
- MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
- as root file system images.
- commit 489c696ae7211218961d159e43e722d74c36fcbc
- Author: Sergei Poselenov <sposelenov@emcraft.com>
- Date: Wed Feb 14 14:30:28 2007 +0300
- MCC200: Extensions to Software Update Mechanism
- Update / extend Software Update Mechanism for MCC200 board:
- - Add support for rootfs image added. The environment variables
- "rootfs_st" and "rootfs_nd" can be used to override the default
- values of the image start and end.
- - Remove excessive key check code.
- - Code cleanup.
- commit 4be23a12f23f1372634edc3215137b09768b7949
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Feb 19 08:23:15 2007 +0100
- [PATCH] Update Sequoia EBC configuration (NOR FLASH)
- As spotted by Matthias Fuchs, the READY input should not be
- enabled for the NOR FLASH on the Sequoia board.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2605e90bf676d48123afe5719a846d2b52b24aac
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Fri Feb 16 07:57:42 2007 +0100
- [PATCH] Added support for the jupiter board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 497d012e5be0194e1084073d0081eb1a844796b2
- Author: Gary Jennejohn <garyj@pollux.denx.de>
- Date: Mon Feb 12 13:11:50 2007 +0100
- LPC2292: patch from Siemens.
- commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Feb 10 08:49:31 2007 +0100
- [PATCH] Add missing p3mx.h file to repository (ups)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Fri Feb 9 10:45:42 2007 +0100
- [Motion-PRO] Preliminary support for the Motion-PRO board.
- commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Feb 7 16:51:08 2007 +0100
- [PATCH] Update some AMCC 4xx board config files (set initrd_high)
- Some boards that can have more than 768MBytes of SDRAM need to
- set "initrd_high", so that the initrd can be accessed by the
- Linux kernel.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 7372ca68227930d03cffa548310524cad5b96733
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Feb 2 12:44:22 2007 +0100
- [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
- Previously the strapping DCR/SDR was read to determine if the internal PCI
- arbiter is enabled or not. This strapping bit can be overridden, so now
- the current status is read from the correct DCR/SDR register.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2aa54f651a42d198673318f07a20c89a43e4d197
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Feb 2 12:42:08 2007 +0100
- [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Feb 1 13:22:41 2007 +0100
- [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
- When PCI PNP is enabled the pci pnp configuration routine is called
- which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
- problems with some PCI cards. For now disable the PCI PNP configuration.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 2902fadade3be7659467e8d074048c6b7068f5c0
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 31 16:56:10 2007 +0100
- [PATCH] Update 440EPx/440GRx cpu detection
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d5ea287b02a6945c3977410e364a879dd1a555c8
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 31 16:38:04 2007 +0100
- [PATCH] Update esd cpci5200 files
- Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 31 16:37:34 2007 +0100
- [PATCH] Add support for esd mecp5200 board
- Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Jan 31 12:38:50 2007 +0100
- [PATCH] Remove unneccessary yellowstone board config file
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e802594b6fa1b166308820c276b96dc0d7cc731c
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jan 30 17:06:10 2007 +0100
- [PATCH] Update Sequoia (440EPx) config file
- The config file now handles the 2nd target, the Rainier (440GRx)
- evaluation board better. Additionally the PPC input clock was
- adjusted to match the correct value of 33.0 MHz.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 700200c67e73b83751418abe7815840dca8fd6cb
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jan 30 17:04:19 2007 +0100
- [PATCH] Merge Yosemite & Yellowstone board ports
- Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
- share one config file and all board specific files. This way we
- don't have to maintain two different sets of files for nearly
- identical boards.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jan 30 15:01:49 2007 +0100
- [PATCH] Update Prodrive SCPU (PDNB3 variant) board
- SCPU doesn't use redundant environment in flash.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Jan 30 12:51:07 2007 +0100
- [PATCH] alpr: Update alpr board config file
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f8db84f132b1e335f20f96138a1f09ed97b08664
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Jan 30 00:50:40 2007 +0100
- LPC2292 SODIMM port coding style cleanup.
- commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
- Author: Gary Jennejohn <garyj@pollux.denx.de>
- Date: Wed Jan 24 12:16:56 2007 +0100
- Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
- commit 2daf046ba627f85f44195815778140039636244e
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Jan 23 17:22:06 2007 +0100
- [iDMR] Add MTD and JFFS2 support, also add default partition definition.
- commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Jan 23 14:21:14 2007 +0100
- [iDMR] Flash driver on initialisation write-protects some sectors,
- currently sectors 0-3. Sector 3 does not need to be protected, though
- (U-boot occupies sectors 0-1 and the environment sector 2). This commit
- fixes this, i.e., only sectors 0-2 are protected.
- commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Jan 23 14:11:22 2007 +0100
- [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
- "mii device" results in "Unexpected exception"). Fixing this properly
- requires some clean-up in the FEC drivers infrastructure for ColdFire, so
- this commit disables MII commads for now.
- commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Tue Jan 23 13:25:22 2007 +0100
- [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
- Identification Register (CIR).
- commit fdef388758506765d4d6a7155c8f1584c63ff581
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Mon Jan 22 13:19:21 2007 +0800
- use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
- The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
- fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
- mpc7448hpc2 board.
- commit a4012396645533aef218354eeba754dff0deace8
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Fri Jan 19 23:08:39 2007 +0100
- Minor code cleanup.
- commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Fri Jan 19 19:57:10 2007 +0100
- [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Fri Jan 19 18:05:26 2007 +0100
- [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
- if you must swap the bytes between reading/writing.
- (Needed for the SC3 board)
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 18 16:05:47 2007 +0100
- [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 18 11:54:52 2007 +0100
- [PATCH] Update Prodrive P3Mx support
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 34167a36c29ee946b727465db5c014746a08e978
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 18 11:48:10 2007 +0100
- [PATCH] Add missing Taishan config file
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Thu Jan 18 11:28:51 2007 +0100
- [PATCH] Fix: Compilerwarnings for SC3 board.
- The EBC Configuration Register is now by CFG_EBC_CFG definable
- Added JFFS2 support for the SC3 board.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
- Author: Stefan Roese <sr@denx.de>
- Date: Thu Jan 18 10:25:34 2007 +0100
- [PATCH] Add support for AMCC Taishan PPC440GX eval board
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Jan 16 18:30:50 2007 +0100
- Raname solidcard3 into sc3; add redundant env for sc3
- commit 1bbbbdd20fcec9933697000dcf55ff7972622596
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Jan 16 12:46:35 2007 +0100
- Update default environment for Solidcard3
- commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Jan 15 09:46:29 2007 +0100
- [PATCH] Fix 440SPe rev B detection from previous patch
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a443d31410c571ee8f970da819a44d698fdd6b1f
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Sun Jan 14 13:35:31 2007 +0100
- [FIX] correct I2C Writes for the LM81 Sensor.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 0bba5452835f19a61204edcda3a58112fd8e2208
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sat Jan 13 11:17:10 2007 +0100
- Undo commit 3033ebb2: reset command does not take any arguments
- Haiying Wang's modification to the reset command was broken, undo it.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
- commit 95981778cff0038fd9941044d6a3eda810e33258
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 13 08:01:03 2007 +0100
- [PATCH] Update 440SP(e) cpu revisions
- Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 13 07:59:56 2007 +0100
- [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
- Now the board revision and the current PCI bus speed are printed after
- the board message.
- Also the EBC initialising is now done via defines in the board config
- file.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 36adff362c2c0141ff8a810d42a7e478f779130f
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 13 07:59:19 2007 +0100
- [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
- Now the board revision and the current PCI bus speed are printed after
- the board message.
- Also the EBC initialising is now done via defines in the board config
- file.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 13 07:57:51 2007 +0100
- [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
- Now the board revision and the current PCI bus speed are printed after
- the board message.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ca43ba18e910206ef8063e4b22d282630bff3fd2
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Thu Jan 11 15:44:44 2007 +0100
- Added support for the SOLIDCARD III board from Eurodesign
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
- Author: Reinhard Thies <Reinhard.Thies@web.de>
- Date: Wed Jan 10 14:41:14 2007 +0100
- Adjusted default environment for cam5200 board.
- commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Jan 10 15:35:52 2007 +0100
- Update CHANGELOG
- commit 787fa15860a57833e50bd30555079a9cd4e519b8
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Jan 10 01:28:39 2007 +0100
- Fix auto_update for MCC200 board.
- The invocation of do_auto_update() is moved to the end of the
- misc_init_r() function, after the flash mappings have been
- initialized. Please find attached a patch that implements that
- change.
- Also correct the decoding of the keypad status. With this update, the
- key that will trigger the update is Column 2, Row 2.
- commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Wed Jan 10 00:26:15 2007 +0100
- CAM5200 flash driver modifications:
- - use CFI driver (replaces custom flash driver) for main 'cam5200' target
- - add second build target 'cam5200_niosflash' which still uses custom driver
- commit 67fea022fa957f59653b5238c7496f80a6b70432
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue Jan 9 16:02:48 2007 +0100
- SPC1920: cleanup memory contoller setup
- commit 8fc2102faa23593c80381437c09f7745a14deb40
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue Jan 9 14:57:14 2007 +0100
- Fix the cpu speed setup to work with all boards.
- commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue Jan 9 14:57:13 2007 +0100
- SPC1920: add support for the FM18L08 Ramtron FRAM
- commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue Jan 9 14:57:13 2007 +0100
- SPC1920: update the HPI register addresses to work with the second
- generation of hardware
- commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
- Author: Markus Klotzbuecher <mk@creamnet.de>
- Date: Tue Jan 9 14:57:13 2007 +0100
- Miscellanious spc1920 related cleanups
- commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue Jan 9 14:57:12 2007 +0100
- SPC1920 GO/NOGO led should be set to color red in U-Boot
- commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
- Author: Markus Klotzbuecher <mk@creamnet.de>
- Date: Tue Jan 9 14:57:12 2007 +0100
- Add support for the DS3231 RTC
- commit 8139567b60d678584b05f0718a681f2047c5e14f
- Author: Markus Klotzbuecher <mk@creamnet.de>
- Date: Tue Jan 9 14:57:11 2007 +0100
- SMC1 uses external CLK4 instead of BRG on spc1920
- commit d8d9de1a02fbd880b613d607143d1f57342affc7
- Author: Markus Klotzbuecher <mk@creamnet.de>
- Date: Tue Jan 9 14:57:10 2007 +0100
- Update the SPC1920 CMB PLD driver
- commit 3f34f869162750e5e999fd140f884f5de952bcfe
- Author: Markus Klotzbuecher <mk@creamnet.de>
- Date: Tue Jan 9 14:57:10 2007 +0100
- Add / enable I2C support on the spc1920 board
- commit d28707dbce1e9ac2017ad051da4133bf22b4204f
- Author: Markus Klotzbuecher <mk@creamnet.de>
- Date: Tue Jan 9 14:57:10 2007 +0100
- Add support for the tms320671x host port interface (HPI)
- commit f4eb54529bb3664c3a562e488b460fe075f79d67
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sun Jan 7 00:13:11 2007 +0100
- Prepare for release 1.2.0
- commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 6 15:58:09 2007 +0100
- [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
- This patch fixes a problem with an incorrect setup for the refresh
- timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit f16c1da9577f06c5fc08651a4065537407de4635
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Jan 6 15:56:13 2007 +0100
- [PATCH] Update ALPR board files
- This update brings the ALPR board support to the newest version.
- It also fixes a problem with the NAND driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cd1d937f90250a32988c37b2b4af8364d25de8ed
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jan 5 11:46:05 2007 +0100
- [PATCH] nand: Fix problem with oobsize calculation
- Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
- The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
- returns a 0x15. In the code fragment below bits [1:0] determine the
- page size, it is ANDed via "(extid & 0x3)" then shifted out. The
- next field is also ANDed with 0x3. However this is a one bit field
- as defined in the Hynix and Samsung parts in the 4th ID byte that
- determins the oobsize, not a two bit field. It works on Samsung as
- bits[3:2] are 01. However for the Hynix there is a 11 in these two
- bits, so the oob size gets messed up.
- I checked the correct linux code and the suggested fix from Brian is
- also available in the linux nand mtd driver.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jan 5 10:40:36 2007 +0100
- [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
- This fix will make the MAL burst disabling patch for the Linux
- EMAC driver obsolete.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 023889838282b6237b401664f22dd22dfba2c066
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Jan 5 10:38:05 2007 +0100
- [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
- This code will optimize the DDR2 controller setup on a board specific
- basis.
- Note: This code doesn't work right now on the NAND booting image for the
- Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cce4acbb68398634b8d011ed7bb0d12269c84230
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Thu Dec 28 19:08:21 2006 +0100
- Few V38B changes:
- - fix a typo in V38B config file
- - move watchdog initialisation earlier in the boot process
- - add "wdt=off" to default kernel command line (disables kernel watchdog)
- commit 92eb729bad876725aeea908d2addba0800620840
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Dec 27 01:26:13 2006 +0100
- Fix bug in adaption of Stefano Babic's CFI driver patch.
- commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sun Dec 24 01:42:57 2006 +0100
- Minor code cleanup.
- commit d784fdb05900ada3686d5778783e1fb328e9fb66
- Author: Stefano Babic <sbabic@denx.de>
- Date: Tue Dec 12 00:22:42 2006 +0100
- Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
- commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
- Author: Stefan Roese <sr@denx.de>
- Date: Fri Dec 22 14:29:40 2006 +0100
- [PATCH] Fix sequoia flash autodetection (finally correct)
- Now 32MByte and 64MByte FLASH is know to work and other
- configurations should work too.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 82e5236a8b719543643fd26d5827938ab2b94818
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Fri Dec 22 10:30:26 2006 +0100
- Minor code cleanup; update CHANGELOG.
- commit fa23044564091f05d9695beb7b5b9a931e7f41a4
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Thu Dec 21 17:17:02 2006 +0100
- Added support for the TQM8272 board from TQ
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
- Author: Heiko Schocher <hs@pollux.denx.de>
- Date: Thu Dec 21 16:14:48 2006 +0100
- [PATCH] Add support for the UC101 board from MAN.
- Signed-off-by: Heiko Schocher <hs@denx.de>
- commit c84bad0ef60e7055ab0bd49b93069509cecc382a
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Dec 20 00:29:43 2006 +0100
- Fix to make the baudrate changes immediate for the MCF52x2 family.
- commit daa6e418bcc0c717752e8de939c213c790286096
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Dec 20 00:27:32 2006 +0100
- Preliminary support for the iDMR board (ColdFire).
- commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
- Author: Andrei Safronov <safronov@pollux.denx.de>
- Date: Fri Dec 8 16:23:08 2006 +0100
- automatic update mechanism
- commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Mon Dec 4 17:56:59 2006 +0800
- Slight code clean up.
- Add comments, delete duplicate define and remove spaces.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Mon Dec 4 17:54:21 2006 +0800
- Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
- multiplier table can not refect the real PLL clock behavior of these
- processors. Please refer to the hardware specification for detailed
- information of the corresponding processors.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Mon Dec 4 14:46:23 2006 +0800
- Remove the static MAC address, ip address, server ip, netmask and
- gateway ip for network setting.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Mon Dec 4 14:33:08 2006 +0800
- Remove the duplicate memory test code for mpc744ihpc2 board.
- If a memory test is needed, please use the functions in
- post/memory.c or memtest command.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Fri Dec 1 19:01:25 2006 +0800
- Fix the exception occuring in RAM table search issue.
- The original search_one_table() function code can only processes the search
- for the exception occurring in FLASH/ROM, because the exception and fixup
- table usually locate in FLASH. If the exception address is also in
- FLASH, it will be OK.
- If the exception occurs in RAM, after the u-boot relocation, a
- relocation offset should be added.
- clean up the code in cpu/74xx_7xx/cpu.c
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit ee311214e0d216f904feea269599d0934bf71f23
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Fri Dec 1 11:47:36 2006 +0800
- Clean up the code according to codestyle:
- (1) remove some C++ comments.
- (2) remove trailing white space.
- (3) remove trailing empty line.
- (4) Indentation by table.
- (5) remove {} in one line condition.
- (6) add space before '(' in function call.
- Remove some weird printf () output.
- Add necessary comments.
- Modified Makefile to support building in a separate directory.
- commit dd520bf314c7add4183c5191692180f576f96b60
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Thu Nov 30 18:02:20 2006 +0100
- Code cleanup.
- commit 8d9a8610b8256331132227e9e6585c6bd5742787
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Thu Nov 30 01:54:07 2006 +0100
- Code cleanup. Update CHANGELOG.
- commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Wed Nov 29 16:23:42 2006 +0100
- [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
- The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
- not the XLB frequency.
- This patch depends on the previous patches for MPC52xx device tree support
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
- commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Nov 29 15:42:37 2006 +0100
- [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
- This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
- and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
- quite similar and share the same board directory "prodrive/p3mx"
- and the same config file "p3mx.h".
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Nov 29 12:53:15 2006 +0100
- [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
- In the bootvx command the load address was only read from the env
- variable "loadaddr" and not optionally passed as paramter as described
- in the help. This is fixed with this patch. The behaviour is now the
- same as in the bootelf command.
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Nov 29 12:03:57 2006 +0100
- [PATCH] include/ppc440.h minor error affecting interrupts
- Fixed include/ppc440.c for UIC address Bug
- Corrects bug affecting the addresses for the universal interrupt
- controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
- Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
- Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Date: Tue Nov 28 16:17:27 2006 -0600
- Make fsl-i2c not conflict with SOFT I2C
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 14198bf768fdc958e3c1afd2404e5262208e98d7
- Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Date: Tue Nov 28 16:17:18 2006 -0600
- Fix I2C master address initialization.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Nov 28 23:31:19 2006 -0600
- Assign maintainers for mpc8349emds and mpc8360emds
- Dave for mpc8360emds, and me for mpc8349emds.
- commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Tue Nov 28 23:28:33 2006 -0600
- Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
- give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
- since they are passed by reference to ucc_get_cmxucr_reg and assigned.
- commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Nov 28 12:09:35 2006 -0600
- mpc83xx: Miscellaneous code style fixes
- Implement various code style fixes and similar changes.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 28 17:55:49 2006 +0100
- [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
- This patch adds the code and configuration necessary to boot with an
- arch/powerpc Linux kernel.
- Signed-off-by: Grant Likely <grant.likely@gmail.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit e732faec95a83cb468b4850ae807c8301dde8f6a
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 28 16:09:24 2006 +0100
- [PATCH] PPC4xx: 440SP Rev. C detection added
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 28 11:04:45 2006 +0100
- [PATCH] nand: Fix patch merge problem
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Nov 28 11:04:45 2006 +0100
- [PATCH] nand: Fix patch merge problem
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Mon Nov 27 22:53:53 2006 +0100
- Update CHANGELOG
- commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 17:43:25 2006 +0100
- [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
- Patch below corrects the setting of the zmiifer register, it was
- overwritting the register rather than ORing the settings.
- Signed-off-by: Neil Wilson <NWilson@airspan.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit d1a72545296800b7e219f93104ad5836f0003d66
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 17:34:10 2006 +0100
- [PATCH] Select NAND embedded environment from board configuration
- The current NAND Bootloader setup forces the environment
- variables to be in line with the bootloader. This change
- enables the configuration to be made in the board include
- file instead so that it can be individually enabled.
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 15784862857c3c2214498defcfed84ff137fb81e
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 17:22:19 2006 +0100
- [PATCH] nand_wait() timeout fixes
- Two fixes for the nand_wait() function in
- drivers/nand/nand_base.c:
- 1. Use correct timeouts. The original timeouts in Linux
- source are 400ms and 20ms not 40s and 20s
- 2. Return correct error value in case of timeout. 0 is
- interpreted as OK.
- Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit da5553b095bf04f4f109ad7e565dae3aba47b230
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 17:04:06 2006 +0100
- [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
- This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
- arguments to bootm. It removes the getenv("disable_of") test that used
- to be used for this purpose.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit a9398e018593782c5fa7d0741955fc1256b34c1e
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Mon Nov 27 15:32:42 2006 +0100
- Minor code cleanup. Update CHANGELOG.
- commit 1729b92cde575476684bffe819d0b7791b57bff2
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 14:52:04 2006 +0100
- [PATCH] 4xx: Fix problem with board specific reset code (now for real)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 14:49:51 2006 +0100
- [PATCH] alpr: remove unused board specific flash driver
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 14:48:41 2006 +0100
- [PATCH] 4xx: Fix problem with board specific reset code
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit ec0c2ec725aec9524a177a77ce75559e644a931a
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 14:46:06 2006 +0100
- [PATCH] Remove testing 4xx enet PHY setup
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 27 14:12:17 2006 +0100
- [PATCH] Update Prodrive ALPR board support (440GX)
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 58b485776698c3d71ec5a215e392123b4c15afa3
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon Nov 27 11:51:21 2006 +0100
- Add a small README with information on the generic ohci driver.
- commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon Nov 27 11:46:46 2006 +0100
- Fix some endianness issues related to the generic ohci driver
- commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon Nov 27 11:44:58 2006 +0100
- Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
- to choose between the old and the generic OHCI drivers.
- commit 53e336e9ffc51035bdc4e5867631b3378761b4df
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon Nov 27 11:43:09 2006 +0100
- Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
- and adapted board configs TQM5200 and yosemite accordingly. This commit
- also makes the maximum number of root hub ports configurable
- (CFG_USB_OHCI_MAX_ROOT_PORTS).
- commit 78d620ebb5871d252270dedfad60c6568993b780
- Author: Wolfgang Denk <wd@atlas.denx.de>
- Date: Thu Nov 23 22:58:58 2006 +0100
- Updates for TQM5200 modules:
- - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
- - simplify "udate" definitions
- commit 2053283304eeddf250d109e6791eb6fa4cad14f7
- Author: Stefan Roese <sr@denx.de>
- Date: Wed Nov 22 13:20:50 2006 +0100
- [PATCH] PPC4xx start.S: Fix for processor errata
- Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
- errata 1.12: 440_33 by moving patch up in code.
- Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 4ef6251403f637841000e0fef9e832aa01339822
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 20 20:39:52 2006 +0100
- [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Mon Nov 20 10:28:30 2006 +0100
- Update CHANGELOG
- commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
- Author: Stefan Roese <sr@denx.de>
- Date: Mon Nov 13 13:55:24 2006 +0100
- [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
- * Adds support for AMD command set Top Boot flash geometry reversal
- * Adds support for reading JEDEC Manufacturer ID and Device ID
- * Adds support for displaying command set, manufacturer id and
- device ids (flinfo)
- * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
- * Removes outdated change history (refer to git log instead)
- Signed-off-by: Tolunay Orkun <listmember@orkun.us>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit b21b511d4c50408f4853f46f06b601272196223f
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sun Nov 12 21:13:23 2006 +0100
- Update CHANGELOG
- commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sat Nov 11 22:48:22 2006 +0100
- Disable the watchdog in the default config for the V38B board.
- commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Sat Nov 11 22:43:00 2006 +0100
- Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
- group is enabled for USB earlier (in cpu_init_f() instead of
- usb_lowlevel_init()).
- commit 91650b3e4de688038d4f71279c44858e3e2c6870
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Mon Nov 6 17:06:36 2006 +0100
- Sequential accesses to non-existent memory must be synchronized,
- at least on G2 cores.
- This fixes get_ram_size() problems on MPC5200 Rev. B boards.
- commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Nov 3 19:15:00 2006 -0600
- mpc83xx: Update 83xx to use fsl_i2c.c
- Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
- cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
- Added multiple I2C bus support to fsl_i2c.c.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit d239d74b1c937984bc519083a8e7de373a390f06
- Author: Timur Tabi <timur@freescale.com>
- Date: Fri Nov 3 12:00:28 2006 -0600
- mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
- Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
- tree matches the other 8xxx trees.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit f7fb2e703ec9688541416962724adff70a7322cb
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Thu Nov 2 19:47:11 2006 -0600
- mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
- commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
- Author: Dave Liu <daveliu@freescale.com>
- Date: Thu Nov 2 18:05:50 2006 -0600
- mpc83xx: Fix the incorrect dcbz operation
- The 834x rev1.x silicon has one CPU5 errata.
- The issue is when the data cache locked with
- HID0[DLOCK], the dcbz instruction looks like no-op inst.
- The right behavior of the data cache is when the data cache
- Locked with HID0[DLOCK], the dcbz instruction allocates
- new tags in cache.
- The 834x rev3.0 and later and 8360 have not this bug inside.
- So, when 834x rev3.0/8360 are working with ECC, the dcbz
- instruction will corrupt the stack in cache, the processor will
- checkstop reset.
- However, the 834x rev1.x can work with ECC with these code,
- because the sillicon has this cache bug. The dcbz will not
- corrupt the stack in cache.
- Really, it is the fault code running on fault sillicon.
- This patch fix the incorrect dcbz operation. Instead of
- CPU FP writing to initialise the ECC.
- CHANGELOG:
- * Fix the incorrect dcbz operation instead of CPU FP
- writing to initialise the ECC memory. Otherwise, it
- will corrupt the stack in cache, The processor will checkstop
- reset.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Nov 1 00:10:40 2006 -0600
- mpc83xx: add OF_FLAT_TREE bits to 83xx boards
- add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
- STDOUT_PATH configuration bits to mpc8349emds,
- mpc8349itx, and mpc8360emds board code.
- redo environment to use bootm with the fdtaddr
- for booting ARCH=powerpc kernels by default,
- and provide default fdtaddr values.
- commit 48041365b3420589ad464ebc7752e0053538b729
- Author: Kim Phillips <kim.phillips@freescale.com>
- Date: Wed Nov 1 00:07:25 2006 -0600
- mpc83xx: change ft code to modify local-mac-address property
- Update 83xx OF code to update local-mac-address properties
- for ethernet instead of the obsolete 'address' property.
- commit 9ca880a250870a7d55754291b5591d2b5fe89b54
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Oct 31 21:23:16 2006 -0600
- mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
- This patch also adds an improved I2C set_speed(), which handles all clock
- frequencies.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit ac4b5622ce050b5ee1e154b98df630d778661632
- Author: Dave Liu <daveliu@freescale.com>
- Date: Tue Oct 31 19:54:59 2006 -0600
- mpc83xx: add the README.mpc8360emds
- add doc/README.mpc8360emds to accompany the new board support
- commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
- Author: Dave Liu <daveliu@freescale.com>
- Date: Fri Nov 3 12:11:15 2006 -0600
- mpc83xx: add QE ethernet support
- this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
- commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
- Author: Dave Liu <daveliu@freescale.com>
- Date: Fri Nov 3 19:33:44 2006 -0600
- mpc83xx: Add MPC8360EMDS basic board support
- Add support for the Freescale MPC8360EMDS board.
- Includes DDR, DUART, Local Bus, PCI.
- commit 23892e49352de74f7fac36ff90bb1be143d195e3
- Author: Dave Liu <daveliu@freescale.com>
- Date: Tue Oct 31 19:30:40 2006 -0600
- mpc83xx: add the QUICC Engine (QE) immap file
- common QE immap file. Also required for 8360.
- commit b701652a4992bdcc62fb1a6038a85beef9e55da4
- Author: Dave Liu <daveliu@freescale.com>
- Date: Tue Oct 31 19:25:38 2006 -0600
- mpc83xx: Add 8360 specifics to 83xx immap
- Mainly add QE device dependencies, with appropriate 8360 protection.
- Lindent also run.
- commit 988833324a7fda482c8ac3ca23eb539f8232e404
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Oct 31 19:14:41 2006 -0600
- mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
- PREREQUISITE PATCHES:
- * This patch can only be applied after the following patches have been applied:
- 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
- 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
- CHANGELOG:
- * For the 8349E-mITX, fix some size values in pci_init_board(), enable
- the clock for the 2nd USB board (Linux kernel will hang otherwise),
- and fix the CONFIG_BOOTARGS macro.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Oct 31 18:44:42 2006 -0600
- mpc83xx: Add support for the MPC8349E-mITX
- PREREQUISITE PATCHES:
- * This patch can only be applied after the following patches have been applied:
- 1) DNX#2006090742000024 "Add support for multiple I2C buses"
- 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
- 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
- 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
- 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
- CHANGELOG:
- * Add support for the Freescale MPC8349E-mITX reference design platform.
- The second TSEC (Vitesse 7385 switch) is not supported at this time.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 183da6d9b446cc12123455844ad1187e2375626f
- Author: Ben Warren <bwarren@qstreams.com>
- Date: Tue Sep 12 10:15:53 2006 -0400
- Additional MPC8349 support for multibus i2c
- Hello,
- Here is a patch for a file that was accidentally left out of a previous
- attempt.
- It accompanies the patch with ticket DNX#2006090742000024
- CHANGELOG:
- Change PCI initialization to use new multi-bus I2C API.
- regards,
- Ben
- commit b24f119d672b709d153ff2ac091d4aa63ec6877d
- Author: Ben Warren <bwarren@qstreams.com>
- Date: Thu Sep 7 16:51:04 2006 -0400
- Multi-bus I2C implementation of MPC834x
- Hello,
- Attached is a patch implementing multiple I2C buses on the MPC834x CPU
- family and the MPC8349EMDS board in particular.
- This patch requires Patch 1 (Add support for multiple I2C buses).
- Testing was performed on a 533MHz board.
- /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- CHANGELOG:
- Implemented driver-level code to support two I2C buses on the
- MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
- are 50kHz, 100kHz and 400kHz on each bus.
- regards,
- Ben
- commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
- Author: Ben Warren <bwarren@qstreams.com>
- Date: Thu Sep 7 16:50:54 2006 -0400
- Add support for multiple I2C buses
- Hello,
- Attached is a patch providing support for multiple I2C buses at the
- command level. The second part of the patch includes an implementation
- for the MPC834x CPU and MPC8349EMDS board.
- /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- Overview:
- 1. Include new 'i2c' command (based on USB implementation) using
- CONFIG_I2C_CMD_TREE.
- 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
- the commands to change bus number and speed are only available under the
- new 'i2c' command mentioned in the first bullet.
- 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
- systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
- of an array of bus-device pairs. Otherwise, it is an array of uchar.
- CHANGELOG:
- Added new 'i2c' master command for all I2C interaction. This is
- conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
- setting I2C bus speed as well as changing the active bus if the board
- has more than one (conditionally compiled with
- CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
- Updated README.
- regards,
- Ben
- commit bed85caf872714ebf53013967a695c9d63acfc68
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Oct 31 18:13:36 2006 -0600
- mpc83xx: Add support for Errata DDR6 on MPC 834x systems
- CHANGELOG:
- * Errata DDR6, which affects all current MPC 834x processors, lists changes
- required to maintain compatibility with various types of DDR memory. This
- patch implements those changes.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit afd6e470f639883002c7c59d562690a5cb0f4865
- Author: Timur Tabi <timur@freescale.com>
- Date: Wed Oct 25 18:45:23 2006 -0500
- mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
- commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
- Author: Timur Tabi <timur@freescale.com>
- Date: Tue Aug 22 17:07:00 2006 -0500
- mpc83xx: Add support for variable flash memory sizes on 83xx systems
- CHANGELOG:
- * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
- window registers, instead of using a hard-coded value of 8MB.
- Signed-off-by: Timur Tabi <timur@freescale.com>
- commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
- Author: Tanya Jiang <tanya.jiang@freescale.com>
- Date: Thu Aug 3 18:38:13 2006 +0800
- mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
- Unified TQM834x variable names with 83xx and consolidated macro
- in preparation for the 8360 and other upcoming 83xx devices.
- Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
- commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
- Author: Dave Liu <daveliu@freescale.com>
- Date: Wed Oct 25 14:41:21 2006 -0500
- mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
- Incorporated the common unified variable names and the changes in preparation
- for releasing mpc8360 patches.
- Signed-off-by: Dave Liu <daveliu@freescale.com>
- commit 3894c46c27c64891f93ac04edde86a9fa9758d92
- Author: Tanya Jiang <tanya.jiang@freescale.com>
- Date: Thu Aug 3 18:36:02 2006 +0800
- mpc83xx: Fix missing build for mpc8349emds pci.c
- Make pci build for mpc8349emds
- Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
- commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
- Author: Tanya Jiang <tanya.jiang@freescale.com>
- Date: Thu Aug 3 18:39:49 2006 +0800
- mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
- Removed unused file resetvec.S for mpc83xx cpu
- Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
- commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
- Author: Nick Spence <Nick.Spence@freescale.com>
- Date: Sat Sep 30 00:32:59 2006 -0700
- NAND Flash verify across block boundaries
- This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
- defined
- and the write crosses a block boundary. The pointer to the verification
- buffer (bufstart) is not being updated to reflect the starting of the
- new
- block so the verification of the second block fails.
- CHANGELOG:
- * Fix NAND FLASH page verification across block boundaries
- commit f484dc791a3932537213c43c654cc1295c64b84c
- Author: Nick Spence <nick.spence@freescale.com>
- Date: Thu Sep 7 07:39:46 2006 -0700
- Added RGMII support to the TSECs and Marvell 881111 Phy
- Added a phy initialization to adjust the RGMII RX and TX timing
- Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
- Signed-off-by: Nick Spence <nick.spence@freescale.com>
- commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Fri Nov 3 13:10:00 2006 +0800
- Remove some unused CFG define.
- undef CFG_DRAM_TEST
- commit 99c09c4dec34f77c243bf51bea532e3f339410ad
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Fri Nov 3 13:07:36 2006 +0800
- Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
- Both work. 0xFF000000 seems more reasonable.
- commit c59200443072353044aa4bf737a5a60f9a9af231
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Thu Nov 2 15:15:01 2006 +0100
- Release U-Boot 1.1.6
- commit c1fbe4103a0d6c8957f912af902d705ba67836f2
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 19:14:48 2006 +0800
- This patch comes from Yuli's posted patch on 8/8/2006
- titled "CFI Driver Little-Endian write Issue".
- http://sourceforge.net/mailarchive/message.php?msg_id=36311999
- If that patch applied, please discard this one.
- Until now , I do not see his patch is applied. So please apply this one.
- Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit b825f158e449e1e9cf74c08e572955e122394c96
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 19:12:31 2006 +0800
- Tsi108 on chip i2c support.
- The i2c Interface provides a master-only, serial interface that can be
- used for initializing Tsi108/Tsi109 registers from an EEPROM after a
- device reset.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 19:11:06 2006 +0800
- Tsi108 on chip pci controller support.
- If there is no pci card, the tsi108/109 pci configure read will
- cause a machine check exception to the processor. PCI error should
- also be cleared after the read.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit d1927cee977126e547ceeba23e4f978f377cfb8f
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 19:08:55 2006 +0800
- Tundra tsi108 on chip Ethernet controller support.
- The following is a brief description of the Ethernet controller:
- The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
- Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
- to manage the two physical connection devices (PHYs). Each Ethernet port
- has its own statistics monitor that tracks and reports key interface
- statistics. Each port supports a 256-entry hash table for address
- filtering. In addition, each port is bridged to the Switch Fabric
- through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
- Each Ethernet port also has a pair of internal Ethernet DMA channels to
- support the transmit and receive data flows. The Ethernet DMA channels
- use descriptors set up in memory, the memory map of the device, and
- access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
- handles arbitration for the Switch Fabric. The Controller also
- has a register businterface for register accesses and status monitor
- control.
- The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
- modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
- The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
- data flows to and from the Ethernet Controller through the Switch Fabric.
- Each Ethernet port uses its transmit and receive DMA channels to manage
- data flows through buffer descriptors that are predefined by the
- system (the descriptors can exist anywhere in the system memory map).
- These descriptors are data structures that point to buffers filled
- with data ready to transmit over Ethernet, or they point to empty
- buffers ready to receive data from Ethernet.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 19:01:33 2006 +0800
- Tundra tsi108 header file.
- The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
- PowerPC processors that offers numerous system interconnect options for
- embedded application designers. The Tsi108 can interconnect 60x or
- MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
- and Flash. Provided the macro define for tsi108 chip.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 87c4db09699c6b89176b31004afcb83eb1585d47
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 18:59:15 2006 +0800
- Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
- mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 27801b8ab11c61b577e45742a515bb3b23b80241
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 18:57:21 2006 +0800
- Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
- Make ,config.mk and link file for the mpc7448hpc2 board.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 18:55:04 2006 +0800
- Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
- The mpc7448hpc2 board support header file.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 625bb5ddb50b243f931262ca8c46956409471917
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 18:52:21 2006 +0800
- Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
- The mpc7448hpc2 board support low level assemble language init code.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 4c52783b3d024e153c4972b97332e314bc3bdc46
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 18:49:51 2006 +0800
- General code modification for mpc7448hpc2 board support.
- 1. Add 7447A and 7448 processor support.
- 2. Add the following flags.
- CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
- (such as by switch on board), this flag should be set.
- CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
- relocates to RAM, this flag should be set.
- CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
- system hang in exception, this flag should be set.
- There is a design issue for tsi108/109 pci configure read. When pci scan
- the slots, if there is no pci card, the tsi108/9 will cause a machine
- check exception for mpc7448 processor.
- Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
- Author: roy zang <tie-fei.zang@freescale.com>
- Date: Thu Nov 2 18:34:47 2006 +0800
- Add README file for mpc7448hpc2 board.
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Nov 1 02:04:38 2006 +0100
- Finish up support for MarelV38B board
- - add watchdog support
- - enable GPIO_WKUP_7 pin for input
- - code cleanup
- commit ffa150bc90c943ca265170bd1be3f293674dd5c7
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Nov 1 01:45:46 2006 +0100
- - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
- * remove warnings when compiling ethaddr.c
- * adjust linker script (fixes a crash resulting from incorrect
- definition of __u_boot_cmd_start)
- - Some MarelV38B code cleanup.
- commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Nov 1 01:38:16 2006 +0100
- - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
- MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
- Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
- MPC5XXX_WU_GPIO_DATA_O for affected boards.
- - Add defintions for some MPC5XXX GPIO pins.
- commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
- Author: Bartlomiej Sieka <tur@semihalf.com>
- Date: Wed Nov 1 01:34:29 2006 +0100
- Changed MarelV38B board make target to lowercase. Config file cleanup.
- commit 1954be6e9c9421b45d0a9d05b10356acc7563150
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sun Oct 29 01:03:51 2006 +0200
- Automatically adjust ARFLAGS so "make -s" is really silent.
- commit fae684e89844856383bdf101440889557df3e6b1
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 28 16:45:00 2006 +0200
- [PATCH] omap925.c: Remove unused functions
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 28 17:12:58 2006 +0200
- [PATCH] Add some missing machtypes for netstar & voiceblue boards
- Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
- numbers in code.
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 856f054410cef52d868feb330168b2a4c4091328
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 28 15:55:52 2006 +0200
- [PATCH] NAND: Partition name support added to NAND subsystem
- chpart, nboot and NAND subsystem related commands now accept also partition
- name to specify offset.
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
- commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sat Oct 28 02:29:44 2006 +0200
- Update CHANGELOG.
- commit 2751a95abd1b96911081c357e96a12fa97b40dee
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sat Oct 28 02:29:14 2006 +0200
- Enable commandline editing and hush shell on all TQM boards.
- commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sat Oct 28 02:28:02 2006 +0200
- README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
- commit 471a7be7a042e95e440f5de969c9765214ae8d6e
- Author: Wolfgang Denk <wd@denx.de>
- Date: Sat Oct 28 01:14:32 2006 +0200
- Check for illegal character '=' in environment variable names.
- Make sure the string passed as variable name does not contain a '='
- character. This not only prevents the common error or typing
- "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
- also closes a backdoor which allowed to delete write-protected
- environment variables, for example by using "setenv ethaddr=".
- commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Sat Oct 28 00:38:39 2006 +0200
- Minor code cleanup.
- commit e11887a77d81077416a2d1c5e0354916fee8c034
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Thu Oct 26 17:55:31 2006 +0200
- Don't pass any debug options directly to the assembler
- When passing the -g option to gcc, gcc automatically selects a
- suitable --g<format> option to pass on to the assembler.
- Thus, there's no point in forcing a specific debug option on the
- assembler using the -Wa mechanism.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Oct 27 07:47:22 2006 -0500
- MPC86xx: Cleaned up unused and conditionally used local variables.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Fri Oct 27 11:55:21 2006 +0200
- Fix "ar" flags in some Makefiles to allow for silent "make -s"
- commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
- Author: Ben Warren <bwarren@qstreams.com>
- Date: Thu Oct 26 14:38:25 2006 -0400
- Fix TSEC driver (now for real): avoid crashes if PHY is not attached
- to a TSEC (e.g. a switch is connected via RMII) or
- if the PHY is defective/incorrectly configured.
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
- Author: Ben Warren <bwarren@qstreams.com>
- Date: Thu Oct 26 14:38:25 2006 -0400
- Fix TSEC driver: avoid crashes if PHY is not attached
- to a TSEC (e.g. a switch is connected via RMII) or
- if the PHY is defective/incorrectly configured.
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
- commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Thu Oct 26 16:24:31 2006 +0200
- Code cleanup.
- commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
- Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Date: Wed Oct 25 15:48:59 2006 +0200
- Finish up support for the ATSTK1000/ATSTK1002 boards
- Add atstk1002_config target to Makefile and move the AVR32 section
- down below Blackfin so that it doesn't end up in the middle of
- MIPS.
- Drop the autogenerated linker script thing for now. Will have to
- revisit how to handle chips with different flash and RAM layout
- later.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
- Author: Kumar Gala <galak@kernel.crashing.org>
- Date: Tue Oct 24 23:47:37 2006 -0500
- Added support for Multi-Image files that contain a device tree
- If a Multi-Image file contains a third image we try to use it as a
- device tree. The device tree image is assumed to be uncompressed in the
- image file. We automatically allocate space for the device tree in memory
- and provide an 8k pad to allow more than a reasonable amount of growth.
- Additionally, a device tree that was contained in flash will now automatically
- get copied to system memory as part of boot. Previously an error was
- reported if one tried to boot a device tree that was in flash.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
- Author: Wolfgang Denk <wd@denx.de>
- Date: Tue Oct 24 21:35:55 2006 +0200
- Switch to automatically generated CHANGELOG file.
- (use "make CHANGELOG" to update it from time to time)
- commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 24 18:06:48 2006 +0200
- Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
- Patch by Stefan Roese, 24 Oct 2006
- commit 8ae3b713b2286e0c3213b7802062e4c1599010de
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 17:24:55 2006 +0200
- Merge with /home/wd/git/u-boot/master
- commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 15:32:57 2006 +0200
- Code cleanup
- commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 14:51:36 2006 +0200
- Move atstk1000 files into vendor specific directory.
- Patch by Haavard Skinnemoen, 12 Sep 2006
- commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 14:42:37 2006 +0200
- Add ATSTK1000 and ATSTK1002 board support
- Patch by Haavard Skinnemoen, 06 Sep 2006
- This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
- daughterboard.
- ATSTK1000 is a full-featured development board for AT32AP CPUs. It
- has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
- and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
- CompactFlash cards. For more information, please see this page:
- http://www.atmel.com/dyn/products/tools.asp?family_id=682
- The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
- AT32AP7000 chip.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit f93ae788c3640fcde5db383471d45548ff4060d0
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 14:31:24 2006 +0200
- Add common serial driver for Atmel AT32 and AT91 chips
- Patch by Haavard Skinnemoen, 06 Sep 2006
- This is a first attempt at creating a common serial driver for Atmel
- chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
- be possible to support AT91RM9200 and other ARM-based chips with some
- minor modifications.
- There's nothing fundamentally AVR32-specific in this driver, but it
- does use some features which are currently only defined for the
- AT32AP CPU port:
- * pm_get_clock_freq: Obtain the clock frequency of a given domain
- * gd->console_uart: A "struct device" containing information about
- register mappings, gpio resources and clocks associated with the
- UART device.
- For more information about these features, please see the "AT32AP
- CPU" patch.
- commit 72a087e04705c26cad982879ebd06b5281bf825a
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 14:27:35 2006 +0200
- Add AT32AP CPU and AT32AP7000 SoC support
- Patch by Haavard Skinnemoen, 06 Sep 2006
- This patch adds support for the AT32AP CPU family and the AT32AP7000
- chip, which is the first chip implementing the AVR32 architecture.
- The AT32AP CPU core is a high-performance implementation featuring a
- 7-stage pipeline, separate instruction- and data caches, and a MMU.
- For more information, please see the "AVR32 AP Technical Reference":
- http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
- In addition to this, the AT32AP7000 chip comes with a large set of
- integrated peripherals, many of which are shared with the AT91 series
- of ARM-based microcontrollers from Atmel. Full data sheet is
- available here:
- http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 7b64fef33c66be648826c0ff9758298ef13d0604
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 14:21:16 2006 +0200
- Add AVR32 architecture support
- Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
- This patch adds common infrastructure code for the Atmel AVR32
- architecture. See doc/README.AVR32 for details.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- commit 2da2d9a4766063b9848f3a35ad6025499cf87265
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 13:57:33 2006 +0200
- Use -g instead of -gstabs in AFLAGS_DEBUG
- Patch by Haavard Skinnemoen, 30 Aug 2006
- In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
- matter what the target's preferred debugging format is. This patch
- simply replaces -gstabs with -g, so that the default debugging format
- for the architecture is used.
- commit 965829872169c2996023840d98e1d85ad148d629
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Tue Oct 24 13:55:18 2006 +0200
- Fix/workaround broken dependency handling with make 3.81
- Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
- commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
- Author: Marian Balakowicz <m8@semihalf.com>
- Date: Mon Oct 23 22:17:05 2006 +0200
- Fix sequoia separate object direcory building problems.
- commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Oct 20 17:16:35 2006 -0500
- Use generic I2C register block on 85xx and 86xx.
- Replace private IMMAP I2C structures with generic reg block
- and allow 86xx to have multiple I2C device busses.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Oct 20 15:54:34 2006 -0500
- Fix compilation warnings on a few 85xx boards.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Oct 20 15:50:15 2006 -0500
- Converted all 85xx boards to use a common FSL I2C driver.
- Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
- And removed hard i2c path from a few u-boot.lds scipts too.
- Minor whitespace cleanups along the way.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4d45f69e362b05892c9e92a7907e5820995612aa
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Oct 19 12:02:24 2006 -0500
- Rewrite a series of goto statements as a sequences of
- conditional expressions instead.
- Use consistent return code 0/-1 for good/bad indicators.
- Include one fewer file if the driver isn't used at all.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 7237c033b02fe295880435f1eb80819a0c987532
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Oct 19 11:02:16 2006 -0500
- Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
- in an effort to begin to unify the umpteen FSL I2C drivers that
- are all otherwise very similar.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Oct 19 11:33:52 2006 -0500
- * Fix a bunch of compiler warnings for gcc 4.0
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Oct 17 06:14:31 2006 +0200
- Add monitor functions for indirect access to PPC440 DCR's
- Patch by Leonid Baryudin, 12 Oct 2006
- commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Fri Oct 13 16:47:53 2006 -0500
- Fixed leading whitespace issues.
- Removed spurious LAWAR thing.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Oct 12 10:42:36 2006 -0500
- Remove unneeded include files and local variable.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
- Author: Grant Likely <grant.likely@secretlab.ca>
- Date: Tue Oct 10 00:23:32 2006 -0600
- Fix possible uninitialized variable compiler warning.
- When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
- do_bootm_linux() may be uninitialized. There is no possibility in the
- current code that len will get used uninitialized, but this fix follows
- the existing convention of setting both len and data to zero at the same
- time.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Oct 11 15:13:01 2006 -0500
- * Fix a bunch of compiler warnings for gcc 4.0
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit bf651baa365e5447246aad6a633ccd667cf24a39
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Oct 11 10:10:43 2006 -0500
- Move "ar" flags to config.mk to allow for silent "make -s"
- commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 10 17:19:03 2006 -0500
- Coding style changes to remove local varible blocks
- and reformat a bit nicer.
- commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 10 17:16:04 2006 -0500
- Fix whitespace issues.
- commit 7b382b7125f2397cce63253df62f183e3dfa2770
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 10 17:14:45 2006 -0500
- Fix whitespace issues.
- commit e10390ddd736b0dad1528eec4b0fe35c0827139a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 10 17:06:53 2006 -0500
- Fix whitespace issues.
- commit 89875e96ba3f023157bf50d5f8e33bf254964a76
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 10 17:03:43 2006 -0500
- Ran lindent and cleaned up whitespace issues.
- Format for 80-columns too.
- commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Oct 10 17:02:22 2006 -0500
- Fix whitespace and 80-col issues.
- commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 7 11:36:51 2006 +0200
- CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
- Patch by Stefan Roese, 07 Oct 2006
- commit 5bc528fa4da751d472397b308137238a6465afd2
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 7 11:35:25 2006 +0200
- Update ALPR code (NAND support working now)
- Patch by Stefan Roese, 07 Oct 2006
- commit 77d5034847d328753b80c46b83f960a14a26f40e
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 7 11:33:03 2006 +0200
- Remove compile warnings in fpga code
- Patch by Stefan Roese, 07 Oct 2006
- commit f3443867e90d2979a7dd1c65b0d537777e1f9850
- Author: Stefan Roese <sr@denx.de>
- Date: Sat Oct 7 11:30:52 2006 +0200
- Add CONFIG_BOARD_RESET to configure board specific reset function
- Patch by Stefan Roese, 07 Oct 2006
- commit f55df18187e7a45cb73fec4370d12135e6691ae1
- Author: John Traill <john.traill@freescale.com>
- Date: Fri Sep 29 08:23:12 2006 +0100
- Fix missing tCycle/modfreq calculation.
- Signed-off-by: John Traill <john.traill@freescale.com>
- commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Sep 13 10:33:35 2006 -0500
- Updated config headers to add default FDT-based booting
- commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Sep 13 10:34:18 2006 -0500
- Add support for eTSEC 3 & 4 on 8548 CDS
- * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
- This will only work on rev 1.3 boards (but doesn't break older boards)
- * Cleaned up some comments to reflect the expanded role of tsec
- in other systems
- commit 084d648b109c8984f83674043c1a7fa3885ef801
- Author: Andy Fleming <afleming@freescale.com>
- Date: Wed Sep 13 10:33:56 2006 -0500
- Added code to support 2.6.18 PCI changes in u-boot
- * Added code to swizzle the IRQ map for the PCI
- commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Sep 19 09:34:10 2006 -0500
- Modified makefile for new build mechanism.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit d14ba6a798beb753e7a864500414fcc2d198b8bc
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Sep 14 08:40:36 2006 -0500
- Handle 86xx SVR values according to the new Reference Manual.
- Both 8641 and 8641D have SVR == 0x8090, and are distinguished
- by the byte in bits 16-23 instead.
- Thanks to Jason Jin for noticing.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Mon Aug 28 14:25:31 2006 +0800
- Fixed an OF-tree off-by-one bug when adding a new property name.
- This bug will cause the kernel booting to pause a long time.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
- commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 29 11:05:09 2006 -0500
- Remove trailing empty lines.
- commit cd6d73d5b895a5935ac4fde0a356288142a584e0
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 29 09:48:49 2006 -0500
- Remove bogus msync and use volatile asm.
- commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 29 08:17:14 2006 -0500
- Add myself as maintainer for MPC8641HPCN.
- commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Mon Aug 28 14:25:31 2006 +0800
- Fixed an OF-tree off-by-one bug when adding a new property name.
- This bug will cause the kernel booting to pause a long time.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Fri Aug 25 14:38:34 2006 -0400
- Change ramdiskaddr and dtbaddr
- Remove PEX fluff commands.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Aug 23 13:32:45 2006 -0500
- * Another small fix for booting with disable_of
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Aug 23 11:04:43 2006 -0500
- Cleanup and lindent new AHCI driver.
- commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
- Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
- Date: Wed Aug 23 19:15:12 2006 +0800
- Add AHCI define and sata support for MPC8641HPCN board.
- Signed-off-by:Jason Jin<jason.jin@freescale.com>
- commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
- Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
- Date: Wed Aug 23 19:10:44 2006 +0800
- Add AHCI support to u-boot
- Add AHCI support in u-boot, enable the sata disk controllers which
- following the AHCI protocol.
- Signed-off-by:Jason Jin<jason.jin@freescale.com>
- commit d8ea2acf5f137cae99417df4f573d036ee384668
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Wed Aug 23 17:54:32 2006 +0800
- Add dtb boot-up parameter to default boot commands.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit b93775c2036b99baa390ea425c4771895bbc63c4
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 22 18:26:08 2006 -0500
- Cleanup even more poorly introduced whitespace.
- commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 22 18:07:00 2006 -0500
- Cleanup more poorly introduced whitespace.
- commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 22 17:54:05 2006 -0500
- Cleanup poorly introduced whitespace.
- commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 22 12:25:27 2006 -0500
- General indent and whitespace cleanups.
- commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 22 12:06:18 2006 -0500
- General indent and whitespace cleanups.
- commit 41a0e8b304d3ff55fe27a230507aac79684016ac
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue Aug 22 10:42:21 2006 -0500
- Cleanup compiler warnings.
- commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
- Author: Matthew McClintock <msm@freescale.com>
- Date: Tue Aug 22 09:31:59 2006 -0500
- Fix disable_of booting
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit 87a449c8ac396420cb24260f717ea9e6faa82047
- Author: Matthew McClintock <msm@freescale.com>
- Date: Tue Aug 22 09:23:55 2006 -0500
- Support for FDT in uImage format, error when using FDT from flash
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit 75c299c38369d01addd5e054b8a16217b70f4a86
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Tue Aug 15 15:12:55 2006 -0400
- Unlock cache before kernel starts up for MPC86xx
- commit 67256678f00c09b0a7f19e862e5c1847553d31bc
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Tue Aug 15 15:13:15 2006 -0400
- Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
- commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Tue Aug 15 15:12:55 2006 -0400
- Unlock cache before kernel starts up for MPC86xx
- commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Tue Aug 15 15:13:15 2006 -0400
- Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
- commit 86c8e17f25e972a7e272950a0735fad84e082b88
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Aug 16 13:59:47 2006 -0500
- * Fix disable_of booting
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Aug 16 10:54:09 2006 -0500
- * Support for FDT in uImage format, error when using FDT from flash
- Signed-off-by: Matthew McClintock <msm@freescale.com>
- commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 15 14:22:35 2006 +0200
- Add initial support for the ALPR board from Prodrive
- NAND needs some additional testing
- Patch by Heiko Schocher, 15 Aug 2006
- commit f0ff4692ff3372dec55074a8eb444943ab095abb
- Author: Stefan Roese <sr@denx.de>
- Date: Tue Aug 15 14:15:51 2006 +0200
- Add FPGA Altera Cyclone 2 support
- Patch by Heiko Schocher, 15 Aug 2006
- commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon Aug 14 15:33:38 2006 -0500
- Fix BAT0 to actually be cacheable, non-guarded as documented.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 40bc83559db5745681909fd7382ae509567e116d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Aug 9 15:32:16 2006 -0500
- Removed MPC8641HPCN DTS source file from build.
- It is no longer linked into U-Boot; its sources are
- now located in the kernel tree.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:47:03 2006 -0500
- * Switched default PCI speed for 8540 ADS back to 33MHz
- * Added comments and a printf to warn that PCI-X won't
- work at 33MHz
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:46:35 2006 -0500
- * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:46:13 2006 -0500
- * Added VIA configuration table
- * Added support for PCI2 on CDS
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit c88f9fe66b64247e5b6a38410ba315ca25596d16
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:45:41 2006 -0500
- * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 97074ed9655309b64231bc2cee69fe85399f8055
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:45:17 2006 -0500
- * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:44:49 2006 -0500
- * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit a4e11558b810ef2cddffdf7b9d86bc1130441960
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:44:23 2006 -0500
- * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:43:36 2006 -0500
- * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:43:00 2006 -0500
- * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
- commit 5498d90312aad9f6bdbf047986027c35b03cd163
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:42:24 2006 -0500
- * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
- commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:41:37 2006 -0500
- * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
- commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
- Author: John Traill <john.traill@freescale.com>
- Date: Wed Aug 9 14:33:50 2006 +0100
- Add Rapidio support for the MPC8641HPCN
- Signed-off-by: John Traill <john.traill@freescale.com>
- commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
- Author: John Traill <john.traill@freescale.com>
- Date: Tue Aug 8 11:32:43 2006 +0100
- Fix caslat calculation
- Signed-off-by: John Traill <john.traill@freescale.com>
- commit 709d3073e74153278e7904a70819bbef7df50e1a
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Aug 3 16:17:56 2006 -0500
- Convert to mac-address in ethernet nodes.
- commit 71748af833ca1017edf1415be376366ff2937d17
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Fri Jul 28 12:41:35 2006 -0400
- Correct the irq value of DUART2
- commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Fri Jul 28 12:41:41 2006 -0400
- Change the space size of PEX IO in README
- commit 239db37c94f7a92941c4465feceb867c609241c5
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Fri Jul 28 12:41:18 2006 -0400
- Move get_board_sys_clk to board directory
- commit 492900b985439fbce1a118afde1e35def870db03
- Author: John Traill <john.traill@freescale.com>
- Date: Fri Jul 28 09:03:54 2006 +0100
- Fix 8641HPCN pollution
- commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
- Author: John Traill <john.traill@freescale.com>
- Date: Fri Jul 28 08:16:06 2006 +0100
- Fix 8641HPCN timebase
- commit c86360b830f1eecd7a72208575dde4f57879faea
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Fri Jul 28 00:01:34 2006 +0800
- Fixed OF device tree of mpc86xxhpcn board.
- The changes works in with kernel irq mapping rework.
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- commit bea3f28d285942bf3f7ab339ce85178ded544225
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Wed Jul 12 10:48:05 2006 -0400
- Add support for reading and writing mac addresses to or from ID EEPROM.
- Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
- With attached patch, we can use command "mac/mac read/mac save/"
- to read and write EEPROM under u-boot prompt.
- U-boot will calculate the checksum of EEPROM while bootup,
- if it is right, then u-boot will check whether the mac address
- of eTSEC0/1/2/3 is availalbe (non-zero).
- If there is mac address availabe in EEPROM, u-boot will use it,
- otherewise, u-boot will use the mac address defined in
- MPC8641HPCN.h. This matches the requirement to set unique mac address
- for each TSEC port.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Signed-off-by: York Sun <yorksun@freescale.com>
- commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
- Author: Jin Zhengxiong <Jason.Jin@freescale.com>
- Date: Thu Jul 13 10:35:10 2006 -0500
- Fixed initrd issue by define big RAM
- Signed-off-by:Jason Jin <Jason.jin@freescale.com>
- commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
- Author: Jason Jin <Jason.jin@freescale.com>
- Date: Fri Jul 7 10:01:45 2006 -0500
- We made a u-boot patch to fix the hang up issue
- when booting filesystem from ramdisk.
- Signed-off-by:Jason Jin <Jason.jin@freescale.com>
- commit 38433ccc5850ee70549af0b2bc5b920355ef5388
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:47:03 2006 -0500
- * Switched default PCI speed for 8540 ADS back to 33MHz
- * Added comments and a printf to warn that PCI-X won't
- work at 33MHz
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:46:35 2006 -0500
- * Fixed a bug where 8555 PCI code used the old variable and
- function names
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:46:13 2006 -0500
- * Added VIA configuration table
- * Added support for PCI2 on CDS
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:45:41 2006 -0500
- * Fixed PCI memory definitions
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 087454609e47295443af793a282cddcd91a5f49c
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:45:17 2006 -0500
- * Added support for initializing second PCI bus on 85xx
- Patch by Andy Fleming 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:44:49 2006 -0500
- * Added PCI-X #defines for PCI-X initialization
- Patch by Andy Fleming on 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:44:23 2006 -0500
- * Made sure the code which disables prefetch for PCI devices
- sets the size of the prefetch region to 0
- Patch by Andy Fleming on 17-Mar-2006
- Signed-off-by: Andy Fleming <afleming@freescale.com>
- commit 40d5fa35d02df22580593bf0039ab173367e8ef0
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:43:36 2006 -0500
- * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
- Patch by Jon Loeliger 17-Jan-2006
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit be7e8b0cb5a0c49dc180075b96df296a893bf146
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:43:00 2006 -0500
- * Removed the oftree.dts for stxxtx in light of the changes
- to the flat device tree handling code
- Patch by Matthew McClintock 26-June-2006
- commit 1b380ec225665e73959677f3893dc658c5925e05
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:42:24 2006 -0500
- * Patch to modify ft_build.c to update flat device trees in place
- Patch by Matthew McClintock 26-June-2006
- commit 98a9c4d468a942a09ebe8979bec508017f3e4462
- Author: Matthew McClintock <msm@freescale.com>
- Date: Wed Jun 28 10:41:37 2006 -0500
- * Modify bootm command to support booting with flat device trees
- Patch by Matthew McClintock 26-June-2006
- commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
- Author: Jin Zhengxiong <Jason.Jin@freescale.com>
- Date: Wed Jun 28 08:43:56 2006 -0500
- Change Id to symbolic name for RTL8139
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
- Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
- Date: Tue Jun 27 18:12:10 2006 +0800
- Fix RTL8139 in big endian
- signed-off-by: Jason Jin <Jason.Jin@freescale.com>
- signed-off-by: Wei Zhang <wei.zhang@freescale.com>
- commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
- Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
- Date: Tue Jun 27 18:12:23 2006 +0800
- Fix Tsec bug when no link
- When tftp a non-exist file from the tftp server, u-boot will check
- the link of all eth port. The original file will return wrong link
- state on the no link ports.
- signed-off-by: Jason Jin <Jason.Jin@freescale.com>
- commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
- Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
- Date: Tue Jun 27 18:12:02 2006 +0800
- Fix bug for io_bar size during pci scan
- During the pci scan process, Some devices return bar_reponse with the
- highest bytes 0, such as the pci bridge in uli1575 return bar_response
- with 0xffffff, So the bar_size should be manually set under 64K.
- Signed-off-by: Jason Jin <jason.jin@freescale.com>
- commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
- Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
- Date: Tue Jun 27 18:11:54 2006 +0800
- Enable PCIE1 for MPC8641HPCN board
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- commit 99d70e3a47affb9bae041a2caece7cd516e213b3
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Mon Jun 26 11:06:00 2006 +0200
- More code cleanup
- commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Jun 22 08:51:46 2006 -0500
- Fix bug in 8641hpcn reset command with no args.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
- Author: Zhang Wei <wei.zhang@freescale.com>
- Date: Tue Jun 20 17:47:15 2006 +0800
- Reworked IRQ mapping in OF-tree.
- commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Jun 15 21:33:37 2006 -0500
- Do not enable address translation on secondary CPUs.
- Do not set up BATs on secondary CPUs. Let Linux do the nasty.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 386eda022473394ad8f36b86f2bdc9b4cb816291
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Jun 14 18:14:56 2006 +0200
- Code cleanup
- commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
- Author: Wolfgang Denk <wd@pollux.denx.de>
- Date: Wed Jun 14 17:45:53 2006 +0200
- Various USB related patches
- - Add support for mpc8xx USB device.
- - Add support for Common Device Class - Abstract Control Model USB console.
- - Add support for flow control in USB slave devices.
- - Add support for switching between gserial and cdc_acm using environment.
- - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
- - Update usbcore slightly to ease host enumeration.
- - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
- - Add AdderUSB_config as a defconfig to enable usage of the USB console
- by default with the Adder87x U-Boot port.
- Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
- commit 8ecc971618f56029ad99d3516f8b297a6ed58971
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jun 7 10:53:55 2006 -0500
- Fix a get_board_sys_clk() use-before-def warning.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
- commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed Jun 7 10:52:49 2006 -0500
- Allow DTC path to be passed in.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
- commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
- Author: Haiying Wang <haiying.wang@freescale.com>
- Date: Tue Jun 6 16:54:29 2006 -0400
- Modify the IRQ of DUART2
- commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed May 31 13:55:35 2006 -0500
- Review cleanups.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed May 31 12:44:44 2006 -0500
- White space cleanup.
- Some 80-column cleanups.
- Convert printf() to puts() where possible.
- Use #include "spd_sdram.h" as needed.
- Enhanced reset command usage message a bit.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed May 31 11:39:34 2006 -0500
- Removed unneeded local_bus_init() from 8641HPCN board.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit 4d3d729c16c392d2982d3266b659d333c927697d
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed May 31 11:24:28 2006 -0500
- Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit b2a941de060350ad15878d8219825f4950e9bb8e
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Wed May 31 10:07:28 2006 -0500
- Remove dead debug code.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
- commit 126aa70f10ba3d20e0a6f4d32328250513b77770
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue May 30 17:47:00 2006 -0500
- Move mpc86xx PIXIS code to board directory
- First cut at moving the PIXIS platform code out of
- the 86xx cpu directory and into board/mpc8641hpcn
- where it belongs.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
- commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue May 30 16:56:14 2006 +0200
- Support generic OHCI support for the s3c24x0 cpu.
- commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Tue May 30 09:10:32 2006 -0500
- Improve "reset" command's interaction with watchdog.
- "reset altbank" will reset another bank WITHOUT watch dog timer enabled
- "reset altbank wd" will reset another bank WITH watch dog enabled
- "diswd" will disable watch dog after u-boot boots up successfully
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Tue May 30 08:51:19 2006 -0500
- Fix two SDRAM setup bugs.
- Fix ECC setup bug.
- Enable 1T/2T based on number of DIMMs present.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit d11fec5015334deb2010e36ce00bb118cc5429a5
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Fri May 26 10:24:48 2006 -0500
- Add first draft of the MPC8641HPCN doc/README.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
- commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Fri May 26 10:13:04 2006 -0500
- Added pci@8000 block.
- Updated ethernet interrupt mappings (moved up 48).
- Cleaned up a few comments.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
- commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Fri May 26 10:01:16 2006 -0500
- Allow args on reset command.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
- commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue May 23 13:38:35 2006 +0200
- Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
- fixes to the latter.
- commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Tue May 23 10:33:11 2006 +0200
- More cleanup for the delta board and the generic usb_ohci driver. Added
- CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
- initialization and cleanup hooks respectively.
- commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
- Author: Markus Klotzbuecher <mk@denx.de>
- Date: Mon May 22 16:33:54 2006 +0200
- This patch adds USB storage support for the delta board. This is the first
- board to make use of a generic OHCI driver, that calls hooks for board
- dependant initialization.
- commit 14e37081ff3cac7ebe6e93836523429853b6b292
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Fri May 19 13:28:39 2006 -0500
- Change arbitration to round-robin for SMP linux.
- commit 9a655876e5995be80f49054e2509500e871e4d3a
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Fri May 19 13:26:34 2006 -0500
- Enable dual DDR controllers and interleaving.
- commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Fri May 19 13:22:44 2006 -0500
- Update 86xx address map and LAWBARs.
- commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Fri May 19 13:14:15 2006 -0500
- Remove L2 Cache invalidate polling.
- commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
- Author: Jon Loeliger <jdl@jdl.com>
- Date: Fri May 19 12:33:09 2006 -0500
- Enable 2nd CPU and I2C.
- commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Mon May 15 07:26:56 2006 -0500
- Update interrupt mapping.
- commit 6cfea33477b04b63ed47386ed1629529484c33ba
- Author: Haiying Wang <Haiying.Wang@freescale.com>
- Date: Wed May 10 09:38:06 2006 -0500
- Remove unneeded INIT_RAM_LOCK cache twiddling.
- Correctly tracks r29 as global data pointer now.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed May 10 09:33:07 2006 -0500
- Remove unnecessary flash.c file.
- commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Tue May 9 08:23:49 2006 -0500
- Get MPC8641HPCN flash images working.
- Enable the CFI driver.
- Remove bogus LAWBAR7 cruft.
- Use correct TEXT_BASE, Fixup load script.
- Enable SPD EEPROM during DDR setup.
- Use generic RFC 1918 IP addresses by default.
- commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Apr 27 10:15:16 2006 -0500
- Cleanup whitespaces and style issues.
- Removed //-style comments.
- Use 80-column lines.
- Remove trailing whitespace.
- Remove dead code and debug cruft.
- commit a2320a6bf8113a09544c42d160d10ac69d049a03
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Thu Apr 27 08:22:39 2006 -0500
- Revert bad PCI prefetch limit change.
- commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
- Author: Jon Loeliger <jdl@freescale.com>
- Date: Wed Apr 26 17:58:56 2006 -0500
- Initial support for MPC8641 HPCN board.
|
