123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211 |
- /*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- * (C) Copyright 2007 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
- /*
- * CPU specific code for the MPC512x family.
- *
- * Derived from the MPC83xx code.
- */
- #include <common.h>
- #include <command.h>
- #include <mpc512x.h>
- #include <netdev.h>
- #include <asm/processor.h>
- #if defined(CONFIG_OF_LIBFDT)
- #include <fdt_support.h>
- #endif
- DECLARE_GLOBAL_DATA_PTR;
- int checkcpu (void)
- {
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- ulong clock = gd->cpu_clk;
- u32 pvr = get_pvr ();
- u32 spridr = immr->sysconf.spridr;
- char buf1[32], buf2[32];
- puts ("CPU: ");
- switch (spridr & 0xffff0000) {
- case SPR_5121E:
- puts ("MPC5121e ");
- break;
- default:
- printf ("Unknown part ID %08x ", spridr & 0xffff0000);
- }
- printf ("rev. %d.%d, Core ", SVR_MJREV (spridr), SVR_MNREV (spridr));
- switch (pvr & 0xffff0000) {
- case PVR_E300C4:
- puts ("e300c4 ");
- break;
- default:
- puts ("unknown ");
- }
- printf ("at %s MHz, CSB at %s MHz\n",
- strmhz(buf1, clock),
- strmhz(buf2, gd->csb_clk) );
- return 0;
- }
- int
- do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
- {
- ulong msr;
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
- msr &= ~( MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
- /*
- * Enable Reset Control Reg - "RSTE" is the magic word that let us go
- */
- immap->reset.rpr = 0x52535445;
- /* Verify Reset Control Reg is enabled */
- while (!((immap->reset.rcer) & RCER_CRE))
- ;
- printf ("Resetting the board.\n");
- udelay(200);
- /* Perform reset */
- immap->reset.rcr = RCR_SWHR;
- /* Unreached... */
- return 1;
- }
- /*
- * Get timebase clock frequency (like cpu_clk in Hz)
- */
- unsigned long get_tbclk (void)
- {
- ulong tbclk;
- tbclk = (gd->bus_clk + 3L) / 4L;
- return tbclk;
- }
- #if defined(CONFIG_WATCHDOG)
- void watchdog_reset (void)
- {
- int re_enable = disable_interrupts ();
- /* Reset watchdog */
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- immr->wdt.swsrr = 0x556c;
- immr->wdt.swsrr = 0xaa39;
- if (re_enable)
- enable_interrupts ();
- }
- #endif
- #ifdef CONFIG_OF_LIBFDT
- #ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
- /*
- * fdt setup for old device trees
- * fix up
- * cpu clocks
- * soc clocks
- * ethernet addresses
- */
- static void old_ft_cpu_setup(void *blob, bd_t *bd)
- {
- /*
- * avoid fixing up by path because that
- * produces scary error messages
- */
- /*
- * old device trees have ethernet nodes with
- * device_type = "network"
- */
- do_fixup_by_prop(blob, "device_type", "network", 8,
- "local-mac-address", bd->bi_enetaddr, 6, 0);
- do_fixup_by_prop(blob, "device_type", "network", 8,
- "address", bd->bi_enetaddr, 6, 0);
- /*
- * old device trees have soc nodes with
- * device_type = "soc"
- */
- do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
- "bus-frequency", bd->bi_ipsfreq, 0);
- }
- #endif
- static void ft_clock_setup(void *blob, bd_t *bd)
- {
- char *cpu_path = "/cpus/" OF_CPU;
- /*
- * fixup cpu clocks using path
- */
- do_fixup_by_path_u32(blob, cpu_path,
- "timebase-frequency", OF_TBCLK, 1);
- do_fixup_by_path_u32(blob, cpu_path,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_path_u32(blob, cpu_path,
- "clock-frequency", bd->bi_intfreq, 1);
- /*
- * fixup soc clocks using compatible
- */
- do_fixup_by_compat_u32(blob, OF_SOC_COMPAT,
- "bus-frequency", bd->bi_ipsfreq, 1);
- }
- void ft_cpu_setup(void *blob, bd_t *bd)
- {
- #ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
- old_ft_cpu_setup(blob, bd);
- #endif
- ft_clock_setup(blob, bd);
- #ifdef CONFIG_HAS_ETH0
- fdt_fixup_ethernet(blob);
- #endif
- }
- #endif
- #ifdef CONFIG_MPC512x_FEC
- /* Default initializations for FEC controllers. To override,
- * create a board-specific function called:
- * int board_eth_init(bd_t *bis)
- */
- int cpu_eth_init(bd_t *bis)
- {
- return mpc512x_fec_initialize(bis);
- }
- #endif
|