CHANGELOG 42 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279
  1. ======================================================================
  2. Changes for U-Boot 1.0.0:
  3. ======================================================================
  4. * Patch by Yuli Barcohen, 25 Sep 2003:
  5. add support for Zephyr Engineering ZPC.1900 board
  6. * Patch by Anders Larsen, 23 Sep 2003:
  7. add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
  8. implemented for the x86 architecture)
  9. * Patch by Sangmoon Kim, 23 Sep 2003:
  10. fix pll_pci_to_mem_multiplier table for MPC8245
  11. * Patch by Anders Larsen, 22 Sep 2003:
  12. enable timed autoboot on PXA
  13. * Patch by David Müller, 22 Sep 2003:
  14. - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
  15. returns correct libgcc file path
  16. - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
  17. time on s3c24x0 systems
  18. * Patch by Jon Diekema, 19 Sep 2003:
  19. - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
  20. link state to the fault LED.
  21. - In NetLoop, make the Fault LED reflect the link status. The link
  22. status gets updated on entry, and on timeouts.
  23. * Patch by Anders Larsen, 18 Sep 2003:
  24. allow mkimage to build and run on Cygwin-hosted systems
  25. * Patch by Frank Müller, 18 Sep 2003:
  26. use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
  27. cpu/mpc8xx/fec.c
  28. * Patch by Pantelis Antoniou, 16 Sep 2003:
  29. add tool to compute fileds in the PLPRCR register for MPC86x
  30. * Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
  31. * Fix build problems under FreeBSD
  32. * Add generic filesystem image type
  33. * Make fatload set filesize environment variable
  34. * enable basic / medium / high-end configurations for PPChameleonEVB
  35. board; fix NAND code
  36. * enable TFTP client code to specify to the server the desired
  37. timeout value (see RFC-2349)
  38. * Improve SDRAM setup for TRAB board
  39. * Suppress all output with splashscreen configured only if "splashimage"
  40. is set
  41. * Fix problems with I2C support for mpc5200
  42. * Adapt TRAB configuration and auto_update to new memory layout
  43. * Add configuration for wtk board
  44. * Add support for the Sharp LQ065T9DR51U LCD display
  45. * Patch by Rune Torgersen, 17 Sep 2003:
  46. - Fixes for MPC8266 default config
  47. - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
  48. * Patches by Jon Diekema, 17 Sep 2003:
  49. - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
  50. env_common.c)
  51. - sbc8260 tweaks
  52. - adjust "help" output
  53. * Patches by Anders Larsen, 17 Sep 2003:
  54. - fix spelling errors
  55. - set GD_FLG_DEVINIT flag only after device function pointers
  56. are valid
  57. - Allow CFG_ALT_MEMTEST on systems where address zero isn't
  58. writeable
  59. - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
  60. - trigger watchdog while waiting in serial driver
  61. * Add auto-update code for TRAB board using USB memory sticks,
  62. support new configuration with more memory
  63. * disable MPC5200 bus pipelining as workaround for bus contention
  64. * Modify XLB arbiter priorities on MPC5200 so all devices use same
  65. priority; configure critical interrupts to be handled like external
  66. interrupts
  67. * Make IPB clock on MGT5100/MPC5200 configurable in board config file;
  68. go back to 66 MHz for stability
  69. * Patches by Jon Diekema, 15 Sep 2003:
  70. - add description for missing CFG_CMD_* entries in the README file
  71. - sacsng tweaks
  72. * Patch by Gleb Natapov, 14 Sep 2003:
  73. enable watchdog support for all MPC824x boards that have a watchdog
  74. * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
  75. "Non-octet Aligned Frame" errors we see at 100 Mbps
  76. * Patch by Sharad Gupta, 14 Sep 2003:
  77. fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
  78. * Patch by llandre, 11 Sep 2003:
  79. update configuration for PPChameleonEVB board
  80. * Patch by David Müller, 13 Sep 2003:
  81. various changes to VCMA9 board specific files
  82. * Add I2C support for MGT5100 / MPC5200
  83. * Patch by Rune Torgersen, 11 Sep 2003:
  84. Changed default memory option on MPC8266ADS to NOT be Page Based
  85. Interleave, since this doesn't work very well with the standard
  86. 16MB DIMM
  87. * Patch by George G. Davis, 12 Sep 2003:
  88. fix Makefile settings for sk98 driver
  89. * Patch by Stefan Roese, 12 Sep 2003:
  90. - new boards added: DP405, HUB405, PLU405, VOH405
  91. - some esd boards updated
  92. - cpu/ppc4xx/sdram.c: disable memory controller before setting
  93. first values
  94. - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
  95. * Patch by Martin Krause, 11 Sep 2003:
  96. add burn-in tests for TRAB board
  97. * Enable instruction cache on MPC5200 board
  98. * Patch by Denis Peter, 11 Sep 2003:
  99. - fix USB data pointer assignment for bulk only transfer.
  100. - prevent to display erased directories in FAT filesystem.
  101. * Change output format for NAND flash - make it look like for other
  102. memory, too
  103. ======================================================================
  104. Changes for U-Boot 0.4.8:
  105. ======================================================================
  106. <<<<<<< CHANGELOG
  107. <<<<<<< CHANGELOG
  108. <<<<<<< CHANGELOG
  109. * Add I2C and RTC support for RMU board
  110. =======
  111. =======
  112. =======
  113. * Patches by Denis Peter, 9 Sep 2003:
  114. add FAT support for IDE, SCSI and USB
  115. * Patches by Gleb Natapov, 2 Sep 2003:
  116. - cleanup of POST code for unsupported architectures
  117. - MPC824x locks way0 of data cache for use as initial RAM;
  118. this patch unlocks it after relocation to RAM and invalidates
  119. the locked entries.
  120. * Patch by Gleb Natapov, 30 Aug 2003:
  121. new I2C driver for mpc107 bridge. Now works from flash.
  122. * Patch by Dave Ellis, 11 Aug 2003:
  123. - JFFS2: fix typo in common/cmd_jffs2.c
  124. - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
  125. - JFFS2: remove node version 0 warning
  126. - JFFS2: accept JFFS2 PADDING nodes
  127. - SXNI855T: add AM29LV800 support
  128. - SXNI855T: move environment from EEPROM to flash
  129. - SXNI855T: boot from JFFS2 in NOR or NAND flash
  130. * Patch by Bill Hargen, 11 Aug 2003:
  131. fixes for I2C on MPC8240
  132. - fix i2c_write routine
  133. - fix iprobe command
  134. - eliminates use of global variables, plus dead code, cleanup.
  135. * Add support for USB Mass Storage Devices (BBB)
  136. (tested with USB memory sticks only)
  137. * Avoid flicker on TRAB's VFD
  138. >>>>>>> 1.130
  139. * Add support for SK98xx driver
  140. * Add PCI support for SL8245 board
  141. * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
  142. or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
  143. Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
  144. * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
  145. to allow for more accurate baudrate settings
  146. (error now 0.7% at 115 kbps, instead of 3.5% before)
  147. * Patch by Andreas Mohr, 4 Sep 2003:
  148. Fix a lot of spelling errors
  149. * Add support for PPChameleon Eval Board
  150. * Add support for P3G4 board
  151. * Fix problem with MGT5100 FEC driver: add "early" MAC address
  152. initialization
  153. * Patch by Yuli Barcohen, 7 Aug 2003:
  154. check BCSR to detect if the board is configured in PCI mode
  155. ======================================================================
  156. Changes for U-Boot 0.4.7:
  157. ======================================================================
  158. * Patch by Raghu Krishnaprasad, 7 Aug 2003:
  159. add support for Adder II MPC852T module
  160. * Patch by George G. Davis, 19 Aug 2003:
  161. fix TI Innovator/OMAP1510 pin configs
  162. * Patches by Kshitij, 18 Aug 2003
  163. - add support for arm926ejs cpu core
  164. - add support for TI OMAP 1610 Innovator Board
  165. * Patch by Yuli Barcohen, 14 Aug 2003:
  166. add support for bzip2 uncompression
  167. * Add GCC library to examples/Makefile so GCC utility functions will
  168. be resolved, too
  169. >>>>>>> 1.118
  170. * Add I2C and RTC support for RMU board using software I2C driver
  171. (because of better response to iprobe command); fix problem with
  172. "reset" command
  173. * Patch by Matthias Fuchs, 28 Aug 2003:
  174. Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
  175. CONFIG_BOOTP_MAKS (see README).
  176. >>>>>>> 1.112
  177. * Fix ICU862 environment problem
  178. * Fix RAM size detection for RMU board
  179. * Implement "reset" for MGT5100/MPC5200 systems
  180. ======================================================================
  181. Changes for U-Boot 0.4.6:
  182. ======================================================================
  183. * Make Ethernet autonegotiation on INCA-IP work for all clock rates;
  184. allow selection of clock frequency as "make" target
  185. * Implement memory autosizing code for IceCube boards
  186. * Configure network port on INCA-IP for autonegotiation
  187. * Fix overflow problem in network timeout code
  188. * Patch by Richard Woodruff, 8 Aug 2003:
  189. Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
  190. ======================================================================
  191. Changes for U-Boot 0.4.5:
  192. ======================================================================
  193. * Update for TQM board defaults:
  194. disable clocks_in_mhz, enable boot count limit
  195. * Removed tools/gdb from "make all" target. Added make target "gdbtools"
  196. in toplevel directory instead. Removed astest.c from tools/gdb because
  197. it is no longer relevant.
  198. * Fix PCI support for MPC5200 / IceCube Board
  199. * Map ISP1362 USB OTG controller for NSCU board
  200. * Patch by Brad Parker, 02 Aug 2003:
  201. fix sc520_cdp problems
  202. * Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
  203. * Allow erase command to cross flash bank boundaries
  204. * Patch by Scott McNutt, 21 Jul 2003:
  205. Add support for LynuxWorks Kernel Downloadable Images (KDIs).
  206. Both LynxOS and BlueCat linux KDIs are supported.
  207. * Patch by Richard Woodruff, 25 Jul 2003:
  208. use more reliable reset for OMAP/925T
  209. * Patch by Nye Liu, 25 Jul 2003:
  210. fix typo in mpc8xx.h
  211. * Patch by Richard Woodruff, 24 Jul 2003:
  212. Fixes for cmd_nand.c:
  213. - Fixed null dereferece which could result in incorrect ECC values.
  214. - Added support for devices with no Ready/Busy signal hooked up.
  215. - Added OMAP1510 read/write protect handling.
  216. - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
  217. for non-JFFS2.
  218. - Switched default ECC to be JFFS2.
  219. * Allow crc32 to be used at address 0x000
  220. * Provide consistent interface to standalone applications to access
  221. the 'global_data' structure
  222. Provide a doc/README.standalone more useful to users/developers.
  223. * Make IceCube MGT5100 FEC driver work
  224. * Implement new mechanism to export U-Boot's functions to standalone
  225. applications: instead of using (PPC-specific) system calls we now
  226. use a jump table; please see doc/README.standalone for details
  227. * Patch by Dave Westwood, 24 Jul 2003:
  228. added support for Unity OS (a proprietary OS)
  229. * Patch by Detlev Zundel, 23 Jul 2003:
  230. add "imls" command to print flash table of contents
  231. * Fix cold boot detection for log buffer reset
  232. * Return error for invalid length specifiers with "cp.X" etc.
  233. * Fix startup problem on MIPS
  234. * Allow for CONFIG_SPLASH_SCREEN even when no explicit
  235. bitmap support is configured
  236. * Patch by Bill Hargen, 18 Jul 2003:
  237. - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
  238. * Patch by Denis Peter, 18 Jul 2003:
  239. - fix memory configuration for MIP405T
  240. - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
  241. * Cleanup of TQM82xx configurations; use "official" board types
  242. to make selection easier.
  243. * Patch by Martin Krause, 17 Jul 2003:
  244. add delay to get I2C working with "imm" command and s3c24x0_i2c.c
  245. * Patch by Richard Woodruff, 17 July 03:
  246. - Fixed bug in OMAP1510 baud rate divisor settings.
  247. * Patch by Nye Liu, 16 July 2003:
  248. MPC860FADS fixes:
  249. - add MPC86xADS support (uses MPC86xADS.h)
  250. - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
  251. o PLPRCR changes
  252. o BRG changes (EXTAL/XTAL restricted to 10MHz)
  253. o don't trust gclk() software measurement by default, depend on
  254. CONFIG_8xx_GCLK_FREQ
  255. - add DRAM SIMM not installed detection
  256. - use more "correct" SDRAM initialization sequence
  257. - allow different SDRAM sizes (8xxADS has 8M)
  258. - default DER is 0
  259. - remove unused MAMR defines from FADS860T.h (all done in fads.c)
  260. - rename MAMR/MBMR defines to be more consistent. Should eventually
  261. be merged into MxMR to better reflect the PowerQUICC datasheet.
  262. * Patch by Yuli Barcohen, 16 Jul 2003:
  263. support new Motorola PQ2FADS-ZU evaluation board which replaced
  264. MPC8260ADS and MPC8266ADS
  265. ======================================================================
  266. Changes for U-Boot 0.4.4:
  267. ======================================================================
  268. * Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
  269. * Add support for MGT5100 and MPC5200 processors
  270. * Patch by Lutz Dennig, 15 Jul 2003:
  271. update for R360MPI board
  272. ======================================================================
  273. Changes for U-Boot 0.4.3:
  274. ======================================================================
  275. * Patches by Kshitij, 04 Jul 2003
  276. - added support for arm925t cpu core
  277. - added support for TI OMAP 1510 Innovator Board
  278. * Patches by Martin Krause, 14 Jul 2003:
  279. - add I2C support for s3c2400 systems (trab board)
  280. - (re-) add "ping" to command table
  281. * Fix handling of "slow" POST routines
  282. * Patches by Yuli Barcohen, 13 Jul 2003:
  283. - Correct flash and JFFS2 support for MPC8260ADS
  284. - fix PVR values and clock generation for PowerQUICC II family
  285. (8270/8275/8280)
  286. * Patch by Bernhard Kuhn, 08 Jul 2003:
  287. - add support for M68K targets
  288. * Patch by Ken Chou, 3 Jul:
  289. - Fix PCI config table for A3000
  290. - Fix iobase for natsemi.c
  291. (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
  292. * Allow to enable "slow" POST routines by key press on power-on
  293. * Fix temperature dependend switching of LCD backlight on LWMON
  294. * Tweak output format for LWMON
  295. * Patch by Stefan Roese, 11 Jul 2003:
  296. - Fix bug in CONFIG_VERSION_VARIABLE.
  297. - AR405 config updated.
  298. - OCRTC/ORSG: bsp command added.
  299. - ASH405 bsp update.
  300. ======================================================================
  301. Changes for U-Boot 0.4.2:
  302. ======================================================================
  303. * Add support for NSCU board
  304. * Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
  305. * Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
  306. mirror bit flash on TQM8xxM modules
  307. * Patch by Kenneth Johansson, 30 Jun 2003:
  308. get rid of MK_CMD_ENTRY macro; update doc/README.command
  309. * Patch by Seb James, 30 Jun 2003:
  310. Improve documentation of I2C configuration in README
  311. * Fix problems with previous log buffer "fixes"
  312. * Fix minor help text issues
  313. * "log append" did not append a newline
  314. ======================================================================
  315. Changes for U-Boot 0.4.1:
  316. ======================================================================
  317. * Fix some missing commands, cleanup header files
  318. (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
  319. * Rewrite command lookup and help command (fix problems with bubble
  320. sort when sorting command name list). Minor cleanup here and there.
  321. * Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
  322. - Allow to call sysmon function interactively
  323. - PIC on LWMON board needs delay after power-on
  324. - Add missing RSR definitions for MPC8xx
  325. - Improve log buffer handling: guarantee clean reset after power-on
  326. - Add support for EXBITGEN board (aka "genie")
  327. - Add support for SL8245 board
  328. * Code cleanup:
  329. - remove trailing white space, trailing empty lines, C++ comments, etc.
  330. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
  331. * Patches by Kenneth Johansson, 25 Jun 2003:
  332. - major rework of command structure
  333. (work done mostly by Michal Cendrowski and Joakim Kristiansen)
  334. ======================================================================
  335. Changes for U-Boot 0.4.0:
  336. ======================================================================
  337. * Patches by Robert Schwebel, 26 Jun 2003:
  338. - csb226 configuration updated
  339. - credits for logodl port updated
  340. - innokom configuration updated
  341. - logodl tree update, still with coding style inconsistencies
  342. - added OCM for ppc405 warning to README
  343. * Patch by Pantelis Antoniou, 25 Jun 2003:
  344. update NetVia with V2 board support
  345. * Header file cleanup for ARM
  346. * Patch by Murray Jensen, 24 Jun 2003:
  347. - make sure to use only U-boot provided header files
  348. - fix problems with ".rodata.str1.4" section as used by GCC-3.x
  349. * Patch by Stefan Roese, 24 Jun 2003:
  350. - Update esd ASH405 board files.
  351. - Update esd DASA_SIM config file.
  352. - Add ping command to some esd boards.
  353. * Patch by Yuli Barcohen, 23 Jun 2003:
  354. Update for MPC8260ADS board
  355. * Patch by Murray Jensen, 23 Jun 2003:
  356. - cleanup of GCC 3.x compiler warnings
  357. * Patch by Rune Torgersen, 4 Jun 2003:
  358. add large memory support for MPC8266ADS board
  359. * Patch by Richard Woodruff, 19 June 03:
  360. - Enabled standard u-boot device abstraction for ARM
  361. - Enabled console device for ARM
  362. - Initilized bi_baudrate for ARM
  363. * Patch by Bill Hargen, 23 Apr 2003:
  364. fix byte order for 824x I2C addresses (write op)
  365. * Patch by Murray Jensen, 20 Jun 2003:
  366. - hymod update
  367. - cleanup (especially for gcc-3.x compilers)
  368. * Patch by Tom Guilliams, 20 Jun 2003:
  369. added CONFIG_750FX support for IBM 750FX processors
  370. * Patch by Devin Crumb, 02 Apr 2003:
  371. Fix clock divider rounding problem in drivers/serial.c
  372. * Patch by Richard Woodruff, 19 June 03:
  373. - Fixed smc91c111 driver to sync with the u-boot environment
  374. (driver/smc91c111.c).
  375. - Added eth_init error return check in NetLoop (net/net.c).
  376. * Patch by Ken Chou, 19 June 2003:
  377. Added support for A3000 SBC board (Artis Microsystems Inc.)
  378. * Patches by Murray Jensen, 17 Jun 2003:
  379. - Hymod board database mods: add "who" field and new xilinx chip types
  380. - provide new "init_cmd_timeout()" function so code external to
  381. "common/main.c" can use the "reset_cmd_timeout()" function before
  382. entering the main loop
  383. - add DTT support for adm1021 (new file dtt/adm1021.c; config
  384. slightly different. see include/configs/hymod.h for an example
  385. (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
  386. CFG_DTT_ADM1021 defined)
  387. - add new "eeprom_probe()" function which has similar args and
  388. behaves in a similar way to "eeprom_read()" etc.
  389. - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
  390. function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
  391. - gdbtools copyright update
  392. - ensure that set_msr() executes the "sync" and "isync" instructions
  393. after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
  394. - 8260 I/O ports fix: Open Drain should be set last when configuring
  395. - add SIU IRQ defines for 8260
  396. - allow LDSCRIPT override and OBJCFLAGS initialization: change to
  397. config.mk to allow board configurations to override the GNU
  398. linker script, selected via the LDSCRIPT, make variable, and to
  399. give an initial value to the OBJCFLAGS make variable
  400. - 8260 i2c enhancement:
  401. o correctly extends the timeout depending on the size of all
  402. queued messages for both transmit and receive
  403. o will not continue with receive if transmit times out
  404. o ensures that the error callback is done for all queued tx
  405. and rx messages
  406. o correctly detects both tx and rx timeouts, only delivers one to
  407. the callback, and does not overwrite an earlier error
  408. o logic in i2c_probe now correct
  409. - add "vprintf()" function so that "panic()" function can be
  410. technically correct
  411. - many Hymod board changes
  412. * Patches by Robert Schwebel, 14 Jun 2003:
  413. - add support for Logotronic DL datalogger board
  414. - cleanup serial line after kermit binary download
  415. - add debugX macro (debug level support)
  416. - update mach-types.h to latest arm.linux.org.uk master list.
  417. * Patches by David Müller, 12 Jun 2003:
  418. - rewrite of the S3C24X0 register definitions stuff
  419. - "driver" for the built-in S3C24X0 RTC
  420. * Patches by Yuli Barcohen, 12 Jun 2003:
  421. - Add MII support and Ethernet PHY initialization for MPC8260ADS board
  422. - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
  423. configuration word supplied by FPGA on some MPC8260ADS boards
  424. * Patch by Pantelis Antoniou, 10 Jun 2003:
  425. Unify status LED interface
  426. * Add support for DS12887 RTC; add RTC support for ATC board
  427. * Patch by Nicolas Lacressonniere, 11 Jun 2003:
  428. Modifications for Atmel AT91RM9200DK ARM920T based development kit
  429. - Add Atmel DataFlash support for reading and writing.
  430. - Add possibility to boot a Linux from DataFlash with BOOTM command.
  431. - Add Flash detection on Atmel AT91RM9200DK
  432. (between Atmel AT49BV1614 and AT49BV1614A flashes)
  433. - Replace old Ethernet PHY layer functions
  434. - Change link address
  435. * Patch by Frank Smith, 9 Jun 2003:
  436. use CRIT_EXCEPTION for machine check on 4xx
  437. * Patch by Detlev Zundel, 13 Jun 2003:
  438. added implementation of the "carinfo" command in cmd_immap.c
  439. * Fix CONFIG_NET_MULTI support in include/net.h
  440. * Patches by Kyle Harris, 13 Mar 2003:
  441. - Add FAT partition support
  442. - Add command support for FAT
  443. - Add command support for MMC
  444. ----
  445. - Add Intel PXA support for video
  446. - Add Intel PXA support for MMC
  447. ----
  448. - Enable MMC and FAT for lubbock board
  449. - Other misc changes for lubbock board
  450. * Patch by Robert Schwebel, April 02, 2003:
  451. fix for SMSC91111 driver
  452. * Patch by Vladimir Gurevich, 04 Jun 2003:
  453. make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
  454. * Patch by Stefan Roese, 05 Jun 2003:
  455. - PPC4xx: Fix bug for initial stack in data cache as pointed out by
  456. Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
  457. data cache can be used even if the chip select is in use.
  458. - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
  459. (see README for further description).
  460. - Changed config files of CONFIG_EEPRO100 boards to use the
  461. CFG_RX_ETH_BUFFER define.
  462. * Add support for RMU board
  463. * Add support for TQM862L at 100/50 MHz
  464. * Patch by Pantelis Antoniou, 02 Jun 2003:
  465. major reconstruction of networking code;
  466. add "ping" support (outgoing only!)
  467. * Patch by Denis Peter, 04 June 2003:
  468. add support for the MIP405T board
  469. * Patches by Udi Finkelstein, 2 June 2003:
  470. - Added support for custom keyboards, initialized by defining a
  471. board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
  472. - Added support for the RBC823 board.
  473. - cpu/mpc8xx/lcd.c now automatically calculates the
  474. Horizontal Pixel Count field.
  475. * Fix alignment problem in BOOTP (dhcp_leasetime option)
  476. [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
  477. * Patch by Mark Rakes, 14 May 2003:
  478. add support for Intel e1000 gig cards.
  479. * Patch by Nye Liu, 3 Jun 2003:
  480. fix critical typo in MAMR definition (include/mpc8xx.h)
  481. * Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
  482. * Patch by Klaus Heydeck, 2 Jun 2003
  483. Minor changes for KUP4K configuration
  484. * Patch by Marc Singer, 29 May 2003:
  485. Fixed rarp boot method for IA32 and other little-endian CPUs.
  486. * Patch by Marc Singer, 28 May 2003:
  487. Added port I/O commands.
  488. * Patch by Matthew McClintock, 28 May 2003
  489. - cpu/mpc824x/start.S: fix relocation code when booting from RAM
  490. - minor patches for utx8245
  491. * Patch by Daniel Engström, 28 May 2003:
  492. x86 update
  493. * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
  494. add nand flash support to SXNI855T configuration
  495. fix/extend nand flash support:
  496. - fix 'nand erase' command so does not erase bad blocks
  497. - fix 'nand write' command so does not write to bad blocks
  498. - fix nand_probe() so handles no flash detected properly
  499. - add doc/README.nand
  500. - add .jffs2 and .oob options to nand read/write
  501. - add 'nand bad' command to list bad blocks
  502. - add 'clean' option to 'nand erase' to write JFFS2 clean markers
  503. - make NAND read/write faster
  504. * Patch by Rune Torgersen, 23 May 2003:
  505. Update for MPC8266ADS board
  506. * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
  507. instead CFG_MONITOR_LEN is now only used to determine _at_compile_
  508. _time_ (!) if the environment is embedded within the U-Boot image,
  509. or in a separate flash sector.
  510. * Cleanup CFG_DER #defines in config files (wd maintained only)
  511. * Fix data abort exception handling for arm920t CPU
  512. * Fix alignment problems with flash driver for TRAB board
  513. * Patch by Donald White, 21 May 2003:
  514. fix calculation of base address in pci_hose_config_device()
  515. * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
  516. execute "cmd2", even if "cmd1" fails. Note that this is different
  517. to "run var1 var2" where the contents of "var2" will NOT be
  518. executed when a command in "var1" fails.
  519. * Add zero-copy ramdisk support (requires corresponding kernel support!)
  520. * Patch by Kyle Harris, 20 May 2003:
  521. In preparation for an ixp port, rename cpu/xscale and arch-xscale
  522. into cpu/pxa and arch-pxa.
  523. * Patch by Stefan Roese, 23 May 2003:
  524. - IBM PPC405EP port added.
  525. - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
  526. UART0) is used as default U-Boot console. PPC4xx only!
  527. - esd ASH405 board added (PPC405EP based).
  528. - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
  529. - esd CPCI405AB board added.
  530. - esd PMC405 board added.
  531. - Update of some esd boards.
  532. * Patch by Denis Peter, 19 Mai 2003:
  533. add support for the MIP405-3 board
  534. * Patch by Dave Ellis, 22 May 2003:
  535. Fix problem with only partially cleared .bss segment
  536. * Patch by Rune Torgersen, 12 May 2003:
  537. get PCI to work on a MPC8266ADS board; incorporate change to
  538. cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
  539. * Patch by Nye Liu, 1 May 2003:
  540. minor patches for the FADS8xx
  541. * Patch by Thomas Schäfer, 28 Apr 2003:
  542. Fix SPD handling for 256 ECC DIMM on Walnut
  543. * Add support for arbitrary bitmaps for TRAB's VFD command;
  544. allow to pass boot bitmap addresses in environment variables;
  545. allow for zero boot delay
  546. * Patch by Christian Geißinger, 19 May 2002:
  547. On TRAB: wait until the dummy byte has been completely sent
  548. * Patch by David Updegraff, 22 Apr 2003:
  549. update for CrayL1 board
  550. * Patch by Pantelis Antoniou, 21 Apr 2003:
  551. add boot support for ARTOS (a proprietary OS)
  552. * Patch by Steven Scholz, 11 Apr 2003:
  553. Add support for RTC DS1338
  554. * Patch by Rod Boyce, 24 Jan 2003:
  555. Fix counting of extended partitions in diskboot command
  556. * Patch by Christophe Lindheimer, 20 May 2003:
  557. allow the use of CFG_LOADS when CFG_NO_FLASH is set
  558. * Fix SDRAM timing on Purple board
  559. * Add support for CompactFlash on ATC board
  560. (includes support for Intel 82365 and compatible PC Card controllers,
  561. and Yenta-compatible PCI-to-CardBus controllers)
  562. * Patch by Mathijs Haarman, 08 May 2003:
  563. Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
  564. * Fix problem with usage of "true" (undefined in current versions of bfd.h)
  565. * Add support for Promess ATC board
  566. * Patch by Keith Outwater, 28 Apr 2003:
  567. - Miscellaneous corrections and additions to GEN860T board specific code.
  568. - Added GEN860_SC variant to GEN860T.
  569. - Miscellaneous corrections to GEN860T documentation.
  570. - Correct duplicate entry in U-Boot CREDITS file.
  571. - Add GEN860T_SC entry in MAINTAINERS file.
  572. - Update CREDITS file with GEN860T_SC info.
  573. * Update Smiths Aerospace addresses in MAINTAINERS file
  574. * Fix error handling in hush's version of "run" command
  575. * LWMON extensions:
  576. - Splashscreen support
  577. - modem support
  578. - sysmon support
  579. - temperature dependend enabling of LCD
  580. * Allow booting from old "PPCBoot" disk partitions
  581. * Add support for TQM8255 Board / MPC8255 CPU
  582. ======================================================================
  583. Changes for U-Boot 0.3.1:
  584. ======================================================================
  585. * Make sure Block Lock Bits get cleared in R360MPI flash driver
  586. * MPC823 LCD driver: Fill color map backwards, to allow for steady
  587. display when Linux takes over
  588. * Patch by Erwin Rol, 27 Feb 2003:
  589. Add support for RTEMS (this time for real).
  590. * Add support for "bmp info" and "bmp display" commands to load
  591. bitmap images; this can be used (for example in a "preboot"
  592. command) to display a splash screen very quickly after poweron.
  593. * Add support for 133 MHz clock on INCA-IP board
  594. * Patch by Lutz Dennig, 10 Apr 2003:
  595. Update for R360MPI board
  596. * Add new meaning to "autostart" environment variable:
  597. If set to "no", a standalone image passed to the
  598. "bootm" command will be copied to the load address
  599. (and eventually uncompressed), but NOT be started.
  600. This can be used to load and uncompress arbitrary
  601. data.
  602. * Patch by Stefan Roese, 10 Apr 2003:
  603. Changed DHCP client to use IP address from server option field #54
  604. from the OFFER packet in the server option field #54 in the REQUEST
  605. packet. This fixes a problem using a Windows 2000 DHCP server,
  606. where the DHCP-server is not the TFTP-server.
  607. * Set max brightness for MN11236 displays on TRAB board
  608. * Add support for TQM862L modules
  609. ======================================================================
  610. Changes for U-Boot 0.3.0:
  611. ======================================================================
  612. * Patch by Arun Dharankar, 4 Apr 2003:
  613. Add IDMA example code (tested on 8260 only)
  614. * Add support for Purple Board (MIPS64 5Kc)
  615. * Add support for MIPS64 5Kc CPUs
  616. * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
  617. * Patch by Denis Peter, 04 Apr 2003:
  618. - update MIP405-4 board
  619. * Patch by Stefan Roese, 4 Apr 2003:
  620. - U-Boot version environment variable "ver" added
  621. (CONFIG_VERSION_VARIABLE).
  622. - Changed PPC405GPr version from A to B.
  623. - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
  624. * Patches by Denis Peter, 03 April 2003:
  625. - fix PCI IRQs on MPL boards
  626. - fix two more un-relocated pointer problems
  627. * Fix behaviour of "run" command:
  628. - print error message iv variable does not exist
  629. - terminate processing of arguments in case of error
  630. * Patches by Peter Figuli, 10 Mar 2003
  631. - Add support for BTUART on PXA platform
  632. - Add support for WEP EP250 (PXA) board
  633. * Fix flash problems on INCA-IP; add tool to allow bruning images to
  634. flash using a BDI2000
  635. * Implement fix for I2C Edge Conditions problem for all boards that
  636. use the bit-banging driver (common/soft_i2c.c)
  637. * Patch by Martin Winistoerfer, 23 Mar 2003
  638. - Add port to MPC555/556 microcontrollers
  639. - Add support for cmi customer board with
  640. Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
  641. * Patch by Rick Bronson, 28 Mar 2003:
  642. - fix common/cmd_nand.c
  643. * Patch by Arun Dharankar, 24 Mar 2003:
  644. - add threads / scheduler example code
  645. * Add patches by Robert Schwebel, 31 Mar 2003:
  646. - add ctrl-c support for kermit download
  647. - align bdinfo output on ARM
  648. - csb226 board: bring in sync with innokom/memsetup.S
  649. - csb226 board: fix MDREFR handling
  650. - misc doc fixes / extensions
  651. - innokom board: cleanup, MDREFR fix in memsetup.S, config update
  652. - add BOOT_PROGRESS to armlinux.c
  653. * Add CPU ID, version, and clock speed for INCA-IP
  654. * Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
  655. - fix SRAM and SDRAM memory sizing
  656. - add status LED support
  657. - add MAC address for second (SCC1) ethernet port
  658. * Update default environment for TQM8260 board
  659. * Patch by Rick Bronson, 16 Mar 2003:
  660. - Add NAND flash support for reading, writing, and erasing NAND
  661. flash (certain forms of which are called SmartMedia).
  662. - Add support for Atmel AT91RM9200DK ARM920T based development kit.
  663. * Patches by Robert Schwebel, 19 Mar 2003:
  664. - use arm-linux-gcc as default compiler for ARM
  665. - fix i2c fixup code
  666. - fix missing baudrate setting
  667. - added $loadaddr / CFG_LOAD_ADDR support to loadb
  668. - moved "ignoring trailing characters" _before_ u-boot wants to
  669. print out diagnostics messages; removes bogus characters at the
  670. end of transmission
  671. * Patch by John Zhan, 18 Mar 2003:
  672. Add support for SinoVee Microsystems SC8xx boards
  673. * Patch by Rolf Offermanns, 21 Mar 2003:
  674. ported the dnp1110 related changes from the current armboot cvs to
  675. current u-boot cvs. smc91111 does not work. problem marked in
  676. smc91111.c, grep for "FIXME".
  677. * Patch by Brian Auld, 25 Mar 2003:
  678. Add support for STM flash chips on ebony board
  679. * Add PCI support for MPC8250 Boards (PM825 module)
  680. * Patch by Stefan Roese, 25 Mar 2003:
  681. - PCI405 update.
  682. * Patch by Stefan Roese, 20 Mar 2003:
  683. - CPCI4052 update (support for revision 3).
  684. - Set edge conditioning circuitry on PPC405GPr for compatibility
  685. to existing PPC405GP designs.
  686. - Clip udiv to 5 bits on PPC405 (serial.c).
  687. * Extend INCAIP board support:
  688. - add automatic RAM size detection
  689. - add "bdinfo" command
  690. - pass flash address and size to Linux kernel
  691. - switch to 150 MHz clock
  692. * Avoid flicker on the TRAB's VFD by synchronizing the enable with
  693. the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
  694. boards, version 153 for Rev. 200 boards).
  695. * Patch by Vladimir Gurevich, 12 Mar 2003:
  696. Fix relocation problem of statically initialized string pointers
  697. in common/cmd_pci.c
  698. * Patch by Kai-Uwe Blöm, 12 Mar 2003:
  699. Cleanup & bug fixes for JFFS2 code:
  700. - the memory mangement was broken. It caused havoc on malloc by
  701. writing beyond the block boundaries.
  702. - the length calculation for files was wrong, sometimes resulting
  703. in short file reads.
  704. - data copying now optionally takes fragment version numbers into
  705. account, to avoid copying from older data.
  706. See doc/README.JFFS2 for details.
  707. * Patch by Josef Wagner, 12 Mar 2003:
  708. - 16/32 MB and 50/80 MHz support with auto-detection for IP860
  709. - ETH05 and BEDBUG support for CU824
  710. - added support for MicroSys CPC45
  711. - new BOOTROM/FLASH0 and DOC base for PM826
  712. * Patch by Robert Schwebel, 12 Mar 2003:
  713. Fix the chpart command on innokom board
  714. * Name cleanup:
  715. mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
  716. s/PPCBoot/U-Boot/ in some files
  717. s/pImage/uImage/ in some files
  718. * Patch by Detlev Zundel, 15 Jan 2003:
  719. Fix '' command line quoting
  720. * Patch by The LEOX team, 19 Jan 2003:
  721. - add support for the ELPT860 board
  722. - add support for Dallas ds164x RTC
  723. * Patches by David Müller, 31 Jan 2003:
  724. - minimal setup for CardBus bridges
  725. - add EEPROM read/write support in the CS8900 driver
  726. - add support for the builtin I2C controller in the Samsung s3c24x0 chips
  727. - add support for MPL's VCMA9 (Samsung s3c2410 based) board
  728. * Patch by Steven Scholz, 04 Feb 2003:
  729. add support for RTC DS1307
  730. * Patch by Reinhard Meyer, 5 Feb 2003:
  731. fix PLPRCR/SCCR init sequence on 8xx to allow for
  732. changes of EBDF by software
  733. * Patch by Vladimir Gurevich, 07 Feb 2003:
  734. "API-compatibility patch" for 4xx I2C driver
  735. * TRAB fixes / extensions:
  736. - Restore VFD brightness as saved in environment
  737. - add support for Fujitsu flashes
  738. - make sure both buzzers are turned off (drive low level)
  739. * Patches by Robert Schwebel, 06 Mar 2003:
  740. - fix bug in BOOTP code (must use NetCopyIP)
  741. - update of CSB226 port
  742. - clear BSS segment on XScale
  743. - added support for i2c_init_board() function
  744. - update to the Innokom plattform
  745. * Extend support for redundand environments for configurations where
  746. environment size < sector size
  747. * Patch by Rune Torgersen, 13 Feb 2003:
  748. Add support for Motorola MPC8266ADS board
  749. * Patch by Kyle Harris, 19 Feb 2003:
  750. patches for the Intel lubbock board:
  751. memsetup.S - general cleanup (based on Robert's csb226 code)
  752. flash.c - overhaul, actually works now
  753. lubbock.c - fix init funcs to return proper value
  754. * Patch by Kenneth Johansson, 26 Feb 2003:
  755. - Fixed off by one in RFTA calculation.
  756. - No need to abort when LDF is lower than we can program it's only
  757. minimum timing so clamp it to what we can do.
  758. - Takes function pointer to function for reading the spd_nvram. Usefull
  759. for faking data or hardcode a module without the nvram.
  760. - fix other user for above change
  761. - fix some comments.
  762. * Patches by Brian Waite, 26 Feb 2003:
  763. - fix port for evb64260 board
  764. - fix PCI for evb64260 board
  765. - fix PCI scan
  766. * Patch by Reinhard Meyer, 1 Mar 2003:
  767. Add support for EMK TOP860 Module
  768. * Patch by Yuli Barcohen, 02 Mar 2003:
  769. Add SPD EEPROM support for MPC8260ADS board
  770. * Patch by Robert Schwebel, 21 Jan 2003:
  771. - Add support for Innokom board
  772. - Don't complain if "install" fails
  773. - README cleanup (remove duplicated lines)
  774. - Update PXA header files
  775. * Add documentation for existing POST code (doc/README.POST)
  776. * Patch by Laudney Ren, 15 Jan 2003:
  777. Fix handling of redundand environment in "tools/envcrc.c"
  778. * Patch by Detlev Zundel, 28 Feb 2003:
  779. Add bedbug support for 824x systems
  780. * Add support for 16 MB flash configuration of TRAB board
  781. * Patch by Erwin Rol, 27 Feb 2003:
  782. Add support for RTEMS
  783. * Add image information to README
  784. * Patch by Stefan Roese, 18 Feb 2003:
  785. CPCIISER4 configuration updated.
  786. * Patch by Stefan Roese, 17 Feb 2003:
  787. Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
  788. * Patch by Stefan Roese, 13 Feb 2003:
  789. Add "pcidelay" environment variable (in ms, enabled via
  790. CONFIG_PCI_BOOTDELAY).
  791. PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
  792. RST# to respond to configuration cycles (33MHz -> 1s).
  793. * Fix dual PCMCIA slot support (when running with just one
  794. slot populated)
  795. * Add VFD type detection to trab board
  796. * extend drivers/cs8900.c driver to synchronize ethaddr environment
  797. variable with value in the EEPROM
  798. * Patch by Stefan Roese, 10 Feb 2003:
  799. Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
  800. * Add support for MIPS32 4Kc CPUs
  801. * Add support for INCA-IP Board
  802. ======================================================================
  803. Changes for U-Boot 0.2.2:
  804. ======================================================================
  805. * Add dual ethernet support on PM826
  806. * Add support for LXT971 PHY on PM826
  807. * Patch by Tord Andersson, 16 Jan 2003:
  808. Fix flash sector count for TQM8xxL
  809. * Fix I2C EEPROM problem on ICU862 board (would only write the first
  810. 16 bytes out of each 32 byte block)
  811. ======================================================================
  812. Changes for U-Boot 0.2.1:
  813. ======================================================================
  814. * Add support for V37 board
  815. (patch by Jón Benediktsson, 11 Dec 2002)
  816. * Update baudrate in bd_info when it gets changed
  817. * Add watchdog trigger points while waiting for serial port
  818. (so far only 8xx -- needed on LWMON with 100ms watchdog)
  819. * Improve command line tool to access the U-Boot's environment
  820. (figuration of the utility, using a config file)
  821. * Add single quote support for (old) command line parser
  822. * Switch LWMON board default config from FRAM to EEPROM;
  823. in POST, EEPROM shows up on 8 addresses
  824. ======================================================================
  825. Changes for U-Boot 0.2.0:
  826. ======================================================================
  827. * Use 1-byte-read instead of -write for iprobe() function
  828. Add i2c commands to PM826 config
  829. * extend I2C POST code: check for list on known addresses
  830. * Improve log buffer code; use "loglevel" to decide which messages
  831. to log on the console, too (like in Linux); get rid of "logstart"
  832. * Add command line tool to access the U-Boot's environment
  833. (board-specific for TRAB now, to be fixed later)
  834. * Patch by Hans-Joerg Frieden, 06 Dec 2002
  835. Fix misc problems with AmigaOne support
  836. * Patch by Chris Hallinan, 3 Dec 2002:
  837. minor cleanup to the MPC8245 EPIC driver
  838. * Patch by Pierre Aubert , 28 Nov 2002
  839. Add support for external (SIU) interrupts on MPC8xx
  840. * Patch by Pierre Aubert , 28 Nov 2002
  841. Fix nested syscalls bug in standalone applications
  842. * Patch by David Müller, 27 Nov 2002:
  843. fix output of "pciinfo" command for CardBus bridge devices.
  844. * Fix bug in TQM8260 board detection - boards got stuck when board ID
  845. was not readable
  846. * Add LED indication for IDE activity on KUP4K board
  847. * Fix startup problems with VFD display on TRAB
  848. * Patch by Pierre Aubert, 20 Nov 2002
  849. Add driver for Epson SED13806 graphic controller.
  850. Add support for BMP logos in cfb_console driver.
  851. * Added support for both PCMCIA slots (at the same time!) on MPC8xx
  852. * Patch by Rod Boyce, 21 Nov 2002:
  853. fix PCMCIA on MBX8xx board
  854. * Patch by Pierre Aubert , 21 Nov 2002
  855. Add CFG_CPM_POST_WORD_ADDR to make the offset of the
  856. bootmode word in DPRAM configurable
  857. * Patch by Daniel Engström, 18 Nov 2002:
  858. Fixes for x86 port (mostly strings issues)
  859. * Patch by Ken Chou, 18 Nov 2002:
  860. Fix for natsemi NIC cards (DP83815)
  861. * Patch by Pierre Aubert, 19 Nov 2002:
  862. fix a bug for the MII configuration, and some warnings
  863. * Patch by Thomas Frieden, 13 Nov 2002:
  864. Add code for AmigaOne board
  865. (preliminary merge to U-Boot, still WIP)
  866. * Patch by Jon Diekema, 12 Nov 2002:
  867. - Adding URL for IEEE OUI lookup
  868. - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
  869. being defined.
  870. - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
  871. root-on-nfs macros are designed to switch how the default boot
  872. method gets defined.
  873. * Patch by Daniel Engström, 13 Nov 2002:
  874. Add support for i386 architecture and AMD SC520 board
  875. * Patch by Pierre Aubert, 12 Nov 2002:
  876. Add support for DOS filesystem and booting from DOS floppy disk
  877. * Patch by Jim Sandoz, 07 Nov 2002:
  878. Increase number of network RX buffers (PKTBUFSRX in
  879. "include/net.h") for EEPRO100 based boards (especially SP8240)
  880. which showed "Receiver is not ready" errors when U-Boot was
  881. processing the receive buffers slower than the network controller
  882. was filling them.
  883. * Patch by Andreas Oberritter, 09 Nov 2002:
  884. Change behaviour of NetLoop(): return -1 for errors, filesize
  885. otherwise; return code 0 is valid an means no file loaded - in this
  886. case the environment still gets updated!
  887. * Patches by Jon Diekema, 9 Nov 2002:
  888. - improve ADC/DAC clocking on the SACSng board to align
  889. the failing edges of LRCLK and SCLK
  890. - sbc8260 configuration tweaks
  891. - add status LED support for 82xx systems
  892. - wire sspi/sspo commands into command handler; improved error
  893. handlering
  894. - add timestamp support and alternate memory test to the
  895. SACSng configuration
  896. * Patch by Vince Husovsky, 7 Nov 2002:
  897. Add "-n" to linker options to get rid of "Not enough room for
  898. program headers" problem
  899. * Patch by David Müller, 05 Nov 2002
  900. Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
  901. so we can use an already existing name
  902. * Patch by Pierre Aubert, 05 Nov 2002
  903. Hardware relatied improvments in FDC boot code
  904. * Patch by Holger Schurig, 5 Nov 2002:
  905. Make the PXA really change it's frequency
  906. * Patch by Pierre Aubert, 05 Nov 2002
  907. Add support for slave serial Spartan 2 FPGAs
  908. * Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
  909. drivers
  910. * Add support for log buffer which can be passed to Linux kernel's
  911. syslog mechanism; used especially for POST results.
  912. * Patch by Klaus Heydeck, 31 Oct 2002:
  913. Add initial support for kup4k board
  914. * Patch by Robert Schwebel, 04 Nov 2002:
  915. - use watchdog to reset PXA250 systems
  916. - added progress callbacks to (some of the) ARM code
  917. - update for Cogent CSB226 board
  918. * Add support for FPS860 board
  919. * Patch by Guillaume Alexandre,, 04 Nov 2002:
  920. Improve PCI access on 32-bits Compact PCI bus
  921. * Fix mdelay() on TRAB - this was still the debugging version with
  922. seconds instead of ms.
  923. * Patch by Robert Schwebel, 1 Nov 2002:
  924. XScale related cleanup (affects all ARM boards)
  925. * Cleanup of names and README.
  926. ======================================================================
  927. Notes for U-Boot 0.1.0:
  928. ======================================================================
  929. This is the initial version of "Das U-Boot", the Universal Boot Loader.
  930. It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
  931. For information about the history of the project please see the
  932. PPCBoot project page at http://sourceforge.net/projects/ppcboot
  933. ======================================================================