| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980 |
- /*
- * Copyright 2007 Freescale Semiconductor, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License Version 2. This file is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
- #ifndef _CONFIG_CMD_ALL_H
- #define _CONFIG_CMD_ALL_H
- /*
- * Alphabetical list of all possible commands.
- */
- #define CONFIG_CMD_ASKENV /* ask for env variable */
- #define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
- #define CONFIG_CMD_BDI /* bdinfo */
- #define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
- #define CONFIG_CMD_BMP /* BMP support */
- #define CONFIG_CMD_BOOTD /* bootd */
- #define CONFIG_CMD_BSP /* Board Specific functions */
- #define CONFIG_CMD_CACHE /* icache, dcache */
- #define CONFIG_CMD_CDP /* Cisco Discovery Protocol */
- #define CONFIG_CMD_CONSOLE /* coninfo */
- #define CONFIG_CMD_DATE /* support for RTC, date/time...*/
- #define CONFIG_CMD_DHCP /* DHCP Support */
- #define CONFIG_CMD_DIAG /* Diagnostics */
- #define CONFIG_CMD_DISPLAY /* Display support */
- #define CONFIG_CMD_DOC /* Disk-On-Chip Support */
- #define CONFIG_CMD_DTT /* Digital Therm and Thermostat */
- #define CONFIG_CMD_ECHO /* echo arguments */
- #define CONFIG_CMD_EEPROM /* EEPROM read/write support */
- #define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */
- #define CONFIG_CMD_ENV /* saveenv */
- #define CONFIG_CMD_EXT2 /* EXT2 Support */
- #define CONFIG_CMD_FAT /* FAT support */
- #define CONFIG_CMD_FDC /* Floppy Disk Support */
- #define CONFIG_CMD_FDOS /* Floppy DOS support */
- #define CONFIG_CMD_FLASH /* flinfo, erase, protect */
- #define CONFIG_CMD_FPGA /* FPGA configuration Support */
- #define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */
- #define CONFIG_CMD_I2C /* I2C serial bus support */
- #define CONFIG_CMD_IDE /* IDE harddisk support */
- #define CONFIG_CMD_IMI /* iminfo */
- #define CONFIG_CMD_IMLS /* List all found images */
- #define CONFIG_CMD_IMMAP /* IMMR dump support */
- #define CONFIG_CMD_IRQ /* irqinfo */
- #define CONFIG_CMD_ITEST /* Integer (and string) test */
- #define CONFIG_CMD_JFFS2 /* JFFS2 Support */
- #define CONFIG_CMD_KGDB /* kgdb */
- #define CONFIG_CMD_LOADB /* loadb */
- #define CONFIG_CMD_LOADS /* loads */
- #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
- #define CONFIG_CMD_MFSL /* FSL support for Microblaze */
- #define CONFIG_CMD_MII /* MII support */
- #define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
- #define CONFIG_CMD_MMC /* MMC support */
- #define CONFIG_CMD_NAND /* NAND support */
- #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
- #define CONFIG_CMD_NFS /* NFS support */
- #define CONFIG_CMD_PCI /* pciinfo */
- #define CONFIG_CMD_PCMCIA /* PCMCIA support */
- #define CONFIG_CMD_PING /* ping support */
- #define CONFIG_CMD_PORTIO /* Port I/O */
- #define CONFIG_CMD_REGINFO /* Register dump */
- #define CONFIG_CMD_REISER /* Reiserfs support */
- #define CONFIG_CMD_RUN /* run command in env variable */
- #define CONFIG_CMD_SAVES /* save S record dump */
- #define CONFIG_CMD_SCSI /* SCSI Support */
- #define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
- #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
- #define CONFIG_CMD_SNTP /* SNTP support */
- #define CONFIG_CMD_SPI /* SPI utility */
- #define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
- #define CONFIG_CMD_USB /* USB Support */
- #define CONFIG_CMD_VFD /* VFD support (TRAB) */
- #define CONFIG_CMD_XIMG /* Load part of Multi Image */
- #endif /* _CONFIG_CMD_ALL_H */
|
