12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485 |
- /* By Thomas.Lange@Corelatus.com 001025
- $Revision: 1.6 $
- Definitions for EEPROM/VOLT METER DS2438
- Copyright (C) 2000-2001 Corelatus AB */
- #ifndef INCeedevh
- #define INCeedevh
- #define E_DEBUG(fmt,args...) if( Debug ) printk(KERN_DEBUG"EE: " fmt, ##args)
- #define PORT_B_PAR ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbpar
- #define PORT_B_ODR ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbodr
- #define PORT_B_DIR ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdir
- #define PORT_B_DAT ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat
- #define SET_PORT_B_INPUT(Mask) PORT_B_DIR &= ~(Mask)
- #define SET_PORT_B_OUTPUT(Mask) PORT_B_DIR |= Mask
- #define WRITE_PORT_B(Mask,Value) { \
- if (Value) PORT_B_DAT |= Mask; \
- else PORT_B_DAT &= ~(Mask); \
- }
- #define WRITE_PORT(Value) WRITE_PORT_B(PB_EEPROM,Value)
- #define READ_PORT (PORT_B_DAT&PB_EEPROM)
- /* 64 bytes chip */
- #define EE_CHIP_SIZE 64
- /* We use this resistor for measuring the current drain on 3.3V */
- #define CURRENT_RESISTOR 0.022
- /* microsecs
- Pull line down at least this long for reset pulse */
- #define RESET_LOW_TIME 490
- /* Read presence pulse after we release reset pulse */
- #define PRESENCE_TIMEOUT 100
- #define PRESENCE_LOW_TIME 200
- #define WRITE_0_LOW 80
- #define WRITE_1_LOW 2
- #define TOTAL_WRITE_LOW 80
- #define READ_LOW 2
- #define READ_TIMEOUT 10
- #define TOTAL_READ_LOW 80
- /*** Rom function commands ***/
- #define READ_ROM 0x33
- #define MATCH_ROM 0x55
- #define SKIP_ROM 0xCC
- #define SEARCH_ROM 0xF0
- /*** Memory_command_function ***/
- #define WRITE_SCRATCHPAD 0x4E
- #define READ_SCRATCHPAD 0xBE
- #define COPY_SCRATCHPAD 0x48
- #define RECALL_MEMORY 0xB8
- #define CONVERT_TEMP 0x44
- #define CONVERT_VOLTAGE 0xB4
- /* Chip is divided in 8 pages, 8 bytes each */
- #define EE_PAGE_SIZE 8
- /* All chip data we want are in page 0 */
- /* Bytes in page 0 */
- #define EE_P0_STATUS 0
- #define EE_P0_TEMP_LSB 1
- #define EE_P0_TEMP_MSB 2
- #define EE_P0_VOLT_LSB 3
- #define EE_P0_VOLT_MSB 4
- #define EE_P0_CURRENT_LSB 5
- #define EE_P0_CURRENT_MSB 6
- /* 40 byte user data is located at page 3-7 */
- #define EE_USER_PAGE_0 3
- #define USER_PAGES 5
- #endif /* INCeedevh */
|