CHANGELOG 6.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203
  1. ======================================================================
  2. Changes since U-Boot 0.2.1:
  3. ======================================================================
  4. * Patch by Stefan Roese, 18 Feb 2003:
  5. CPCIISER4 configuration updated.
  6. * Patch by Stefan Roese, 17 Feb 2003:
  7. Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
  8. * Patch by Stefan Roese, 13 Feb 2003:
  9. Add "pcidelay" environment variable (in ms, enabled via
  10. CONFIG_PCI_BOOTDELAY).
  11. PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
  12. RST# to respond to configuration cycles (33MHz -> 1s).
  13. * Patch by Stefan Roese, 10 Feb 2003:
  14. Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
  15. * Add dual ethernet support on PM826
  16. * Add support for LXT971 PHY on PM826
  17. * Patch by Tord Andersson, 16 Jan 2003:
  18. Fix flash sector count for TQM8xxL
  19. * Fix I2C EEPROM problem on ICU862 board (would only write the first
  20. 16 bytes out of each 32 byte block)
  21. ======================================================================
  22. Changes for U-Boot 0.2.1:
  23. ======================================================================
  24. * Add support for V37 board
  25. (patch by Jón Benediktsson, 11 Dec 2002)
  26. * Update baudrate in bd_info when it gets changed
  27. * Add watchdog trigger points while waiting for serial port
  28. (so far only 8xx -- needed on LWMON with 100ms watchdog)
  29. * Improve command line tool to access the U-Boot's environment
  30. (figuration of the utility, using a config file)
  31. * Add single quote support for (old) command line parser
  32. * Switch LWMON board default config from FRAM to EEPROM;
  33. in POST, EEPROM shows up on 8 addresses
  34. ======================================================================
  35. Changes for U-Boot 0.2.0:
  36. ======================================================================
  37. * Use 1-byte-read instead of -write for iprobe() function
  38. Add i2c commands to PM826 config
  39. * extend I2C POST code: check for list on known addresses
  40. * Improve log buffer code; use "loglevel" to decide which messages
  41. to log on the console, too (like in Linux); get rid of "logstart"
  42. * Add command line tool to access the U-Boot's environment
  43. (board-specific for TRAB now, to be fixed later)
  44. * Patch by Hans-Joerg Frieden, 06 Dec 2002
  45. Fix misc problems with AmigaOne support
  46. * Patch by Chris Hallinan, 3 Dec 2002:
  47. minor cleanup to the MPC8245 EPIC driver
  48. * Patch by Pierre Aubert , 28 Nov 2002
  49. Add support for external (SIU) interrupts on MPC8xx
  50. * Patch by Pierre Aubert , 28 Nov 2002
  51. Fix nested syscalls bug in standalone applications
  52. * Patch by David Müller, 27 Nov 2002:
  53. fix output of "pciinfo" command for CardBus bridge devices.
  54. * Fix bug in TQM8260 board detection - boards got stuck when board ID
  55. was not readable
  56. * Add LED indication for IDE activity on KUP4K board
  57. * Fix startup problems with VFD display on TRAB
  58. * Patch by Pierre Aubert, 20 Nov 2002
  59. Add driver for Epson SED13806 graphic controller.
  60. Add support for BMP logos in cfb_console driver.
  61. * Added support for both PCMCIA slots (at the same time!) on MPC8xx
  62. * Patch by Rod Boyce, 21 Nov 2002:
  63. fix PCMCIA on MBX8xx board
  64. * Patch by Pierre Aubert , 21 Nov 2002
  65. Add CFG_CPM_POST_WORD_ADDR to make the offset of the
  66. bootmode word in DPRAM configurable
  67. * Patch by Daniel Engström, 18 Nov 2002:
  68. Fixes for x86 port (mostly strings issues)
  69. * Patch by Ken Chou, 18 Nov 2002:
  70. Fix for natsemi NIC cards (DP83815)
  71. * Patch by Pierre Aubert, 19 Nov 2002:
  72. fix a bug for the MII configuration, and some warnings
  73. * Patch by Thomas Frieden, 13 Nov 2002:
  74. Add code for AmigaOne board
  75. (preliminary merge to U-Boot, still WIP)
  76. * Patch by Jon Diekema, 12 Nov 2002:
  77. - Adding URL for IEEE OUI lookup
  78. - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
  79. being defined.
  80. - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
  81. root-on-nfs macros are designed to switch how the default boot
  82. method gets defined.
  83. * Patch by Daniel Engström, 13 Nov 2002:
  84. Add support for i386 architecture and AMD SC520 board
  85. * Patch by Pierre Aubert, 12 Nov 2002:
  86. Add support for DOS filesystem and booting from DOS floppy disk
  87. * Patch by Jim Sandoz, 07 Nov 2002:
  88. Increase number of network RX buffers (PKTBUFSRX in
  89. "include/net.h") for EEPRO100 based boards (especially SP8240)
  90. which showed "Receiver is not ready" errors when U-Boot was
  91. processing the receive buffers slower than the network controller
  92. was filling them.
  93. * Patch by Andreas Oberritter, 09 Nov 2002:
  94. Change behaviour of NetLoop(): return -1 for errors, filesize
  95. otherwise; return code 0 is valid an means no file loaded - in this
  96. case the environment still gets updated!
  97. * Patches by Jon Diekema, 9 Nov 2002:
  98. - improve ADC/DAC clocking on the SACSng board to align
  99. the failing edges of LRCLK and SCLK
  100. - sbc8260 configuration tweaks
  101. - add status LED support for 82xx systems
  102. - wire sspi/sspo commands into command handler; improved error
  103. handlering
  104. - add timestamp support and alternate memory test to the
  105. SACSng configuration
  106. * Patch by Vince Husovsky, 7 Nov 2002:
  107. Add "-n" to linker options to get rid of "Not enough room for
  108. program headers" problem
  109. * Patch by David Müller, 05 Nov 2002
  110. Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
  111. so we can use an already existing name
  112. * Patch by Pierre Aubert, 05 Nov 2002
  113. Hardware relatied improvments in FDC boot code
  114. * Patch by Holger Schurig, 5 Nov 2002:
  115. Make the PXA really change it's frequency
  116. * Patch by Pierre Aubert, 05 Nov 2002
  117. Add support for slave serial Spartan 2 FPGAs
  118. * Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
  119. drivers
  120. * Add support for log buffer which can be passed to Linux kernel's
  121. syslog mechanism; used especially for POST results.
  122. * Patch by Klaus Heydeck, 31 Oct 2002:
  123. Add initial support for kup4k board
  124. * Patch by Robert Schwebel, 04 Nov 2002:
  125. - use watchdog to reset PXA250 systems
  126. - added progress callbacks to (some of the) ARM code
  127. - update for Cogent CSB226 board
  128. * Add support for FPS860 board
  129. * Patch by Guillaume Alexandre,, 04 Nov 2002:
  130. Improve PCI access on 32-bits Compact PCI bus
  131. * Fix mdelay() on TRAB - this was still the debugging version with
  132. seconds instead of ms.
  133. * Patch by Robert Schwebel, 1 Nov 2002:
  134. XScale related cleanup (affects all ARM boards)
  135. * Cleanup of names and README.
  136. ======================================================================
  137. Notes for U-Boot 0.1.0:
  138. ======================================================================
  139. This is the initial version of "Das U-Boot", the Universal Boot Loader.
  140. It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
  141. For information about the history of the project please see the
  142. PPCBoot project page at http://sourceforge.net/projects/ppcboot
  143. ======================================================================