123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211 |
- /*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
- #include <common.h>
- #include <asm/io.h>
- #include <asm/i8254.h>
- #include <asm/ibmpc.h>
- static volatile unsigned long system_ticks;
- static int timer_init_done =0;
- static void timer_isr(void *unused)
- {
- system_ticks++;
- }
- unsigned long get_system_ticks(void)
- {
- return system_ticks;
- }
- #define TIMER0_VALUE 0x04aa /* 1kHz 1.9318MHz / 1000 */
- #define TIMER2_VALUE 0x0a8e /* 440Hz */
- int timer_init(void)
- {
- system_ticks = 0;
-
- irq_install_handler(0, timer_isr, NULL);
-
- /* initialize timer 0 and 2
- *
- * Timer 0 is used to increment system_tick 1000 times/sec
- * Timer 1 was used for DRAM refresh in early PC's
- * Timer 2 is used to drive the speaker
- * (to stasrt a beep: write 3 to port 0x61,
- * to stop it again: write 0)
- */
-
- outb(PIT_CMD_CTR0|PIT_CMD_BOTH|PIT_CMD_MODE2, PIT_BASE + PIT_COMMAND);
- outb(TIMER0_VALUE&0xff, PIT_BASE + PIT_T0);
- outb(TIMER0_VALUE>>8, PIT_BASE + PIT_T0);
- outb(PIT_CMD_CTR2|PIT_CMD_BOTH|PIT_CMD_MODE3, PIT_BASE + PIT_COMMAND);
- outb(TIMER2_VALUE&0xff, PIT_BASE + PIT_T2);
- outb(TIMER2_VALUE>>8, PIT_BASE + PIT_T2);
- timer_init_done = 1;
-
- return 0;
- }
- #ifdef CFG_TIMER_GENERIC
- /* the unit for these is CFG_HZ */
- /* FixMe: implement these */
- void reset_timer (void)
- {
- system_ticks = 0;
- }
- ulong get_timer (ulong base)
- {
- return (system_ticks - base);
- }
- void set_timer (ulong t)
- {
- system_ticks = t;
- }
- static u16 read_pit(void)
- {
- u8 low;
- outb(PIT_CMD_LATCH, PIT_BASE + PIT_COMMAND);
- low = inb(PIT_BASE + PIT_T0);
- return ((inb(PIT_BASE + PIT_T0) << 8) | low);
- }
- /* this is not very exact */
- void udelay (unsigned long usec)
- {
- int counter;
- int wraps;
-
- if (!timer_init_done) {
- return;
- }
- counter = read_pit();
- wraps = usec/1000;
- usec = usec%1000;
-
- usec*=1194;
- usec/=1000;
- usec+=counter;
- if (usec > 1194) {
- usec-=1194;
- wraps++;
- }
- while (1) {
- int new_count = read_pit();
-
- if (((new_count < usec) && !wraps) || wraps < 0) {
- break;
- }
-
- if (new_count > counter) {
- wraps--;
- }
- counter = new_count;
- }
-
- }
- #if 0
- /* this is a version with debug output */
- void _udelay (unsigned long usec)
- {
- int counter;
- int wraps;
-
- int usec1, usec2, usec3;
- int wraps1, wraps2, wraps3, wraps4;
- int ctr1, ctr2, ctr3, nct1, nct2;
- int i;
- usec1=usec;
- if (!timer_init_done) {
- return;
- }
- counter = read_pit();
- ctr1 = counter;
- wraps = usec/1000;
- usec = usec%1000;
-
- usec2 = usec;
- wraps1 = wraps;
-
- usec*=1194;
- usec/=1000;
- usec+=counter;
- if (usec > 1194) {
- usec-=1194;
- wraps++;
- }
- usec3 = usec;
- wraps2 = wraps;
-
- ctr2 = wraps3 = nct1 = 4711;
- ctr3 = wraps4 = nct2 = 4711;
- i=0;
- while (1) {
- int new_count = read_pit();
- i++;
- if ((new_count < usec && !wraps) || wraps < 0) {
- break;
- }
-
- if (new_count > counter) {
- wraps--;
- }
- if (ctr2==4711) {
- ctr2 = counter;
- wraps3 = wraps;
- nct1 = new_count;
- } else {
- ctr3 = counter;
- wraps4 = wraps;
- nct2 = new_count;
- }
-
- counter = new_count;
- }
-
- printf("udelay(%d)\n", usec1);
- printf("counter %d\n", ctr1);
- printf("1: wraps %d, usec %d\n", wraps1, usec2);
- printf("2: wraps %d, usec %d\n", wraps2, usec3);
- printf("new_count[0] %d counter %d wraps %d\n", nct1, ctr2, wraps3);
- printf("new_count[%d] %d counter %d wraps %d\n", i, nct2, ctr3, wraps4);
- printf("%d %d %d %d %d\n",
- read_pit(), read_pit(), read_pit(),
- read_pit(), read_pit());
- }
- #endif
- #endif
|