global_data.h 5.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196
  1. /*
  2. * (C) Copyright 2002
  3. * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  4. *
  5. * See file CREDITS for list of people who contributed to this
  6. * project.
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License as
  10. * published by the Free Software Foundation; either version 2 of
  11. * the License, or (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21. * MA 02111-1307 USA
  22. */
  23. #ifndef __ASM_GBL_DATA_H
  24. #define __ASM_GBL_DATA_H
  25. #include "asm/types.h"
  26. /*
  27. * The following data structure is placed in some memory wich is
  28. * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
  29. * some locked parts of the data cache) to allow for a minimum set of
  30. * global variables during system initialization (until we have set
  31. * up the memory controller so that we can use RAM).
  32. *
  33. * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
  34. */
  35. typedef struct global_data {
  36. bd_t *bd;
  37. unsigned long flags;
  38. unsigned long baudrate;
  39. unsigned long cpu_clk; /* CPU clock in Hz! */
  40. unsigned long bus_clk;
  41. #if defined(CONFIG_8xx)
  42. unsigned long brg_clk;
  43. #endif
  44. #if defined(CONFIG_CPM2)
  45. /* There are many clocks on the MPC8260 - see page 9-5 */
  46. unsigned long vco_out;
  47. unsigned long cpm_clk;
  48. unsigned long scc_clk;
  49. unsigned long brg_clk;
  50. #ifdef CONFIG_PCI
  51. unsigned long pci_clk;
  52. #endif
  53. #endif
  54. unsigned long mem_clk;
  55. #if defined(CONFIG_MPC83xx)
  56. /* There are other clocks in the MPC83XX */
  57. u32 csb_clk;
  58. #if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
  59. u32 tsec1_clk;
  60. u32 tsec2_clk;
  61. u32 usbdr_clk;
  62. #endif
  63. #if defined (CONFIG_MPC834X)
  64. u32 usbmph_clk;
  65. #endif /* CONFIG_MPC834X */
  66. #if defined(CONFIG_MPC8315)
  67. u32 tdm_clk;
  68. #endif
  69. u32 core_clk;
  70. u32 enc_clk;
  71. u32 lbiu_clk;
  72. u32 lclk_clk;
  73. u32 pci_clk;
  74. #if defined(CONFIG_MPC837X) || defined(CONFIG_MPC831X)
  75. u32 pciexp1_clk;
  76. u32 pciexp2_clk;
  77. #endif
  78. #if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
  79. u32 sata_clk;
  80. #endif
  81. #if defined(CONFIG_MPC8360)
  82. u32 mem_sec_clk;
  83. #endif /* CONFIG_MPC8360 */
  84. #endif
  85. #if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8536)
  86. u32 sdhc_clk;
  87. #endif
  88. #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
  89. u32 lbc_clk;
  90. #endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */
  91. #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
  92. u32 i2c1_clk;
  93. u32 i2c2_clk;
  94. #endif
  95. #if defined(CONFIG_QE)
  96. u32 qe_clk;
  97. u32 brg_clk;
  98. uint mp_alloc_base;
  99. uint mp_alloc_top;
  100. #endif /* CONFIG_QE */
  101. #if defined(CONFIG_FSL_LAW)
  102. u32 used_laws;
  103. #endif
  104. #if defined(CONFIG_MPC5xxx)
  105. unsigned long ipb_clk;
  106. unsigned long pci_clk;
  107. #endif
  108. #if defined(CONFIG_MPC512X)
  109. u32 ips_clk;
  110. u32 csb_clk;
  111. u32 pci_clk;
  112. #endif /* CONFIG_MPC512X */
  113. #if defined(CONFIG_MPC8220)
  114. unsigned long bExtUart;
  115. unsigned long inp_clk;
  116. unsigned long pci_clk;
  117. unsigned long vco_clk;
  118. unsigned long pev_clk;
  119. unsigned long flb_clk;
  120. #endif
  121. phys_size_t ram_size; /* RAM size */
  122. unsigned long reloc_off; /* Relocation Offset */
  123. unsigned long reset_status; /* reset status register at boot */
  124. #if defined(CONFIG_MPC83xx)
  125. unsigned long arbiter_event_attributes;
  126. unsigned long arbiter_event_address;
  127. #endif
  128. unsigned long env_addr; /* Address of Environment struct */
  129. unsigned long env_valid; /* Checksum of Environment valid? */
  130. unsigned long have_console; /* serial_init() was called */
  131. #if defined(CONFIG_SYS_ALLOC_DPRAM) || defined(CONFIG_CPM2)
  132. unsigned int dp_alloc_base;
  133. unsigned int dp_alloc_top;
  134. #endif
  135. #if defined(CONFIG_4xx)
  136. u32 uart_clk;
  137. #endif /* CONFIG_4xx */
  138. #if defined(CONFIG_SYS_GT_6426x)
  139. unsigned int mirror_hack[16];
  140. #endif
  141. #if defined(CONFIG_A3000) || \
  142. defined(CONFIG_HIDDEN_DRAGON) || \
  143. defined(CONFIG_MUSENKI) || \
  144. defined(CONFIG_SANDPOINT)
  145. void * console_addr;
  146. #endif
  147. #ifdef CONFIG_AMIGAONEG3SE
  148. unsigned long relocaddr; /* Start address of U-Boot in RAM */
  149. #endif
  150. #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
  151. unsigned long fb_base; /* Base address of framebuffer memory */
  152. #endif
  153. #if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
  154. unsigned long post_log_word; /* Record POST activities */
  155. unsigned long post_init_f_time; /* When post_init_f started */
  156. #endif
  157. #ifdef CONFIG_BOARD_TYPES
  158. unsigned long board_type;
  159. #endif
  160. #ifdef CONFIG_MODEM_SUPPORT
  161. unsigned long do_mdm_init;
  162. unsigned long be_quiet;
  163. #endif
  164. #if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5)
  165. unsigned long kbd_status;
  166. #endif
  167. #if defined(CONFIG_WD_MAX_RATE)
  168. unsigned long long wdt_last; /* trace watch-dog triggering rate */
  169. #endif
  170. void **jt; /* jump table */
  171. } gd_t;
  172. /*
  173. * Global Data Flags
  174. */
  175. #define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
  176. #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
  177. #define GD_FLG_SILENT 0x00004 /* Silent mode */
  178. #define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
  179. #define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */
  180. #define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */
  181. #define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
  182. #if 1
  183. #define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r2")
  184. #else /* We could use plain global data, but the resulting code is bigger */
  185. #define XTRN_DECLARE_GLOBAL_DATA_PTR extern
  186. #define DECLARE_GLOBAL_DATA_PTR XTRN_DECLARE_GLOBAL_DATA_PTR \
  187. gd_t *gd
  188. #endif
  189. #endif /* __ASM_GBL_DATA_H */