CHANGELOG 22 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657
  1. ======================================================================
  2. Changes since U-Boot 0.3.1:
  3. ======================================================================
  4. * Patch by Stefan Roese, 05 Jun 2003:
  5. - PPC4xx: Fix bug for initial stack in data cache as pointed out by
  6. Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
  7. data cache can be used even if the chip select is in use.
  8. - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
  9. (see README for further description).
  10. - Changed config files of CONFIG_EEPRO100 boards to use the
  11. CFG_RX_ETH_BUFFER define.
  12. * Patch by Denis Peter, 04 June 2003:
  13. add support for the MIP405T board
  14. * Patches by Udi Finkelstein, 2 June 2003:
  15. - Added support for custom keyboards, initialized by defining a
  16. board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
  17. - Added support for the RBC823 board.
  18. - cpu/mpc8xx/lcd.c now automatically calculates the
  19. Horizontal Pixel Count field.
  20. * Fix alignment problem in BOOTP (dhcp_leasetime option)
  21. [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
  22. * Patch by Mark Rakes, 14 May 2003:
  23. add support for Intel e1000 gig cards.
  24. * Patch by Nye Liu, 3 Jun 2003:
  25. fix critical typo in MAMR definition (include/mpc8xx.h)
  26. * Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
  27. * Patch by Klaus Heydeck, 2 Jun 2003
  28. Minor changes for KUP4K configuration
  29. * Patch by Marc Singer, 29 May 2003:
  30. Fixed rarp boot method for IA32 and other little-endian CPUs.
  31. * Patch by Marc Singer, 28 May 2003:
  32. Added port I/O commands.
  33. * Patch by Matthew McClintock, 28 May 2003
  34. - cpu/mpc824x/start.S: fix relocation code when booting from RAM
  35. - minor patches for utx8245
  36. * Patch by Daniel Engström, 28 May 2003:
  37. x86 update
  38. * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
  39. add nand flash support to SXNI855T configuration
  40. fix/extend nand flash support:
  41. - fix 'nand erase' command so does not erase bad blocks
  42. - fix 'nand write' command so does not write to bad blocks
  43. - fix nand_probe() so handles no flash detected properly
  44. - add doc/README.nand
  45. - add .jffs2 and .oob options to nand read/write
  46. - add 'nand bad' command to list bad blocks
  47. - add 'clean' option to 'nand erase' to write JFFS2 clean markers
  48. - make NAND read/write faster
  49. * Patch by Rune Torgersen, 23 May 2003:
  50. Update for MPC8266ADS board
  51. * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
  52. instead CFG_MONITOR_LEN is now only used to determine _at_compile_
  53. _time_ (!) if the environment is embedded within the U-Boot image,
  54. or in a separate flash sector.
  55. * Cleanup CFG_DER #defines in config files (wd maintained only)
  56. * Fix data abort exception handling for arm920t CPU
  57. * Fix alignment problems with flash driver for TRAB board
  58. * Patch by Donald White, 21 May 2003:
  59. fix calculation of base address in pci_hose_config_device()
  60. * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
  61. execute "cmd2", even if "cmd1" fails. Note that this is different
  62. to "run var1 var2" where the contents of "var2" will NOT be
  63. executed when a command in "var1" fails.
  64. * Add zero-copy ramdisk support (requires corresponding kernel support!)
  65. * Patch by Kyle Harris, 20 May 2003:
  66. In preparation for an ixp port, rename cpu/xscale and arch-xscale
  67. into cpu/pxa and arch-pxa.
  68. * Patch by Stefan Roese, 23 May 2003:
  69. - IBM PPC405EP port added.
  70. - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
  71. UART0) is used as default U-Boot console. PPC4xx only!
  72. - esd ASH405 board added (PPC405EP based).
  73. - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
  74. - esd CPCI405AB board added.
  75. - esd PMC405 board added.
  76. - Update of some esd boards.
  77. * Patch by Denis Peter, 19 Mai 2003:
  78. add support for the MIP405-3 board
  79. * Patch by Dave Ellis, 22 May 2003:
  80. Fix problem with only partially cleared .bss segment
  81. * Patch by Rune Torgersen, 12 May 2003:
  82. get PCI to work on a MPC8266ADS board; incorporate change to
  83. cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
  84. * Patch by Nye Liu, 1 May 2003:
  85. minor patches for the FADS8xx
  86. * Patch by Thomas Schäfer, 28 Apr 2003:
  87. Fix SPD handling for 256 ECC DIMM on Walnut
  88. * Add support for arbitrary bitmaps for TRAB's VFD command;
  89. allow to pass boot bitmap addresses in environment variables;
  90. allow for zero boot delay
  91. * Patch by Christian Geißinger, 19 May 2002:
  92. On TRAB: wait until the dummy byte has been completely sent
  93. * Patch by David Updegraff, 22 Apr 2003:
  94. update for CrayL1 board
  95. * Patch by Pantelis Antoniou, 21 Apr 2003:
  96. add boot support for ARTOS (a proprietary OS)
  97. * Patch by Steven Scholz, 11 Apr 2003:
  98. Add support for RTC DS1338
  99. * Patch by Rod Boyce, 24 Jan 2003:
  100. Fix counting of extended partitions in diskboot command
  101. * Patch by Christophe Lindheimer, 20 May 2003:
  102. allow the use of CFG_LOADS when CFG_NO_FLASH is set
  103. * Fix SDRAM timing on Purple board
  104. * Add support for CompactFlash on ATC board
  105. (includes support for Intel 82365 and compatible PC Card controllers,
  106. and Yenta-compatible PCI-to-CardBus controllers)
  107. * Patch by Mathijs Haarman, 08 May 2003:
  108. Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
  109. * Fix problem with usage of "true" (undefined in current versions of bfd.h)
  110. * Add support for Promess ATC board
  111. * Patch by Keith Outwater, 28 Apr 2003:
  112. - Miscellaneous corrections and additions to GEN860T board specific code.
  113. - Added GEN860_SC variant to GEN860T.
  114. - Miscellaneous corrections to GEN860T documentation.
  115. - Correct duplicate entry in U-Boot CREDITS file.
  116. - Add GEN860T_SC entry in MAINTAINERS file.
  117. - Update CREDITS file with GEN860T_SC info.
  118. * Update Smiths Aerospace addresses in MAINTAINERS file
  119. * Fix error handling in hush's version of "run" command
  120. * LWMON extensions:
  121. - Splashscreen support
  122. - modem support
  123. - sysmon support
  124. - temperature dependend enabling of LCD
  125. * Allow booting from old "PPCBoot" disk partitions
  126. * Add support for TQM8255 Board / MPC8255 CPU
  127. ======================================================================
  128. Changes for U-Boot 0.3.1:
  129. ======================================================================
  130. * Make sure Block Lock Bits get cleared in R360MPI flash driver
  131. * MPC823 LCD driver: Fill color map backwards, to allow for steady
  132. display when Linux takes over
  133. * Patch by Erwin Rol, 27 Feb 2003:
  134. Add support for RTEMS (this time for real).
  135. * Add support for "bmp info" and "bmp display" commands to load
  136. bitmap images; this can be used (for example in a "preboot"
  137. command) to display a splash screen very quickly after poweron.
  138. * Add support for 133 MHz clock on INCA-IP board
  139. * Patch by Lutz Dennig, 10 Apr 2003:
  140. Update for R360MPI board
  141. * Add new meaning to "autostart" environment variable:
  142. If set to "no", a standalone image passed to the
  143. "bootm" command will be copied to the load address
  144. (and eventually uncompressed), but NOT be started.
  145. This can be used to load and uncompress arbitrary
  146. data.
  147. * Patch by Stefan Roese, 10 Apr 2003:
  148. Changed DHCP client to use IP address from server option field #54
  149. from the OFFER packet in the server option field #54 in the REQUEST
  150. packet. This fixes a problem using a Windows 2000 DHCP server,
  151. where the DHCP-server is not the TFTP-server.
  152. * Set max brightness for MN11236 displays on TRAB board
  153. * Add support for TQM862L modules
  154. ======================================================================
  155. Changes for U-Boot 0.3.0:
  156. ======================================================================
  157. * Patch by Arun Dharankar, 4 Apr 2003:
  158. Add IDMA example code (tested on 8260 only)
  159. * Add support for Purple Board (MIPS64 5Kc)
  160. * Add support for MIPS64 5Kc CPUs
  161. * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
  162. * Patch by Denis Peter, 04 Apr 2003:
  163. - update MIP405-4 board
  164. * Patch by Stefan Roese, 4 Apr 2003:
  165. - U-Boot version environment variable "ver" added
  166. (CONFIG_VERSION_VARIABLE).
  167. - Changed PPC405GPr version from A to B.
  168. - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
  169. * Patches by Denis Peter, 03 April 2003:
  170. - fix PCI IRQs on MPL boards
  171. - fix two more un-relocated pointer problems
  172. * Fix behaviour of "run" command:
  173. - print error message iv variable does not exist
  174. - terminate processing of arguments in case of error
  175. * Patches by Peter Figuli, 10 Mar 2003
  176. - Add support for BTUART on PXA platform
  177. - Add support for WEP EP250 (PXA) board
  178. * Fix flash problems on INCA-IP; add tool to allow bruning images to
  179. flash using a BDI2000
  180. * Implement fix for I2C Edge Conditions problem for all boards that
  181. use the bit-banging driver (common/soft_i2c.c)
  182. * Patch by Martin Winistoerfer, 23 Mar 2003
  183. - Add port to MPC555/556 microcontrollers
  184. - Add support for cmi customer board with
  185. Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
  186. * Patch by Rick Bronson, 28 Mar 2003:
  187. - fix common/cmd_nand.c
  188. * Patch by Arun Dharankar, 24 Mar 2003:
  189. - add threads / scheduler example code
  190. * Add patches by Robert Schwebel, 31 Mar 2003:
  191. - add ctrl-c support for kermit download
  192. - align bdinfo output on ARM
  193. - csb226 board: bring in sync with innokom/memsetup.S
  194. - csb226 board: fix MDREFR handling
  195. - misc doc fixes / extensions
  196. - innokom board: cleanup, MDREFR fix in memsetup.S, config update
  197. - add BOOT_PROGRESS to armlinux.c
  198. * Add CPU ID, version, and clock speed for INCA-IP
  199. * Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
  200. - fix SRAM and SDRAM memory sizing
  201. - add status LED support
  202. - add MAC address for second (SCC1) ethernet port
  203. * Update default environment for TQM8260 board
  204. * Patch by Rick Bronson, 16 Mar 2003:
  205. - Add NAND flash support for reading, writing, and erasing NAND
  206. flash (certain forms of which are called SmartMedia).
  207. - Add support for Atmel AT91RM9200DK ARM920T based development kit.
  208. * Patches by Robert Schwebel, 19 Mar 2003:
  209. - use arm-linux-gcc as default compiler for ARM
  210. - fix i2c fixup code
  211. - fix missing baudrate setting
  212. - added $loadaddr / CFG_LOAD_ADDR support to loadb
  213. - moved "ignoring trailing characters" _before_ u-boot wants to
  214. print out diagnostics messages; removes bogus characters at the
  215. end of transmission
  216. * Patch by John Zhan, 18 Mar 2003:
  217. Add support for SinoVee Microsystems SC8xx boards
  218. * Patch by Rolf Offermanns, 21 Mar 2003:
  219. ported the dnp1110 related changes from the current armboot cvs to
  220. current u-boot cvs. smc91111 does not work. problem marked in
  221. smc91111.c, grep for "FIXME".
  222. * Patch by Brian Auld, 25 Mar 2003:
  223. Add support for STM flash chips on ebony board
  224. * Add PCI support for MPC8250 Boards (PM825 module)
  225. * Patch by Stefan Roese, 25 Mar 2003:
  226. - PCI405 update.
  227. * Patch by Stefan Roese, 20 Mar 2003:
  228. - CPCI4052 update (support for revision 3).
  229. - Set edge conditioning circuitry on PPC405GPr for compatibility
  230. to existing PPC405GP designs.
  231. - Clip udiv to 5 bits on PPC405 (serial.c).
  232. * Extend INCAIP board support:
  233. - add automatic RAM size detection
  234. - add "bdinfo" command
  235. - pass flash address and size to Linux kernel
  236. - switch to 150 MHz clock
  237. * Avoid flicker on the TRAB's VFD by synchronizing the enable with
  238. the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
  239. boards, version 153 for Rev. 200 boards).
  240. * Patch by Vladimir Gurevich, 12 Mar 2003:
  241. Fix relocation problem of statically initialized string pointers
  242. in common/cmd_pci.c
  243. * Patch by Kai-Uwe Blöm, 12 Mar 2003:
  244. Cleanup & bug fixes for JFFS2 code:
  245. - the memory mangement was broken. It caused havoc on malloc by
  246. writing beyond the block boundaries.
  247. - the length calculation for files was wrong, sometimes resulting
  248. in short file reads.
  249. - data copying now optionally takes fragment version numbers into
  250. account, to avoid copying from older data.
  251. See doc/README.JFFS2 for details.
  252. * Patch by Josef Wagner, 12 Mar 2003:
  253. - 16/32 MB and 50/80 MHz support with auto-detection for IP860
  254. - ETH05 and BEDBUG support for CU824
  255. - added support for MicroSys CPC45
  256. - new BOOTROM/FLASH0 and DOC base for PM826
  257. * Patch by Robert Schwebel, 12 Mar 2003:
  258. Fix the chpart command on innokom board
  259. * Name cleanup:
  260. mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
  261. s/PPCBoot/U-Boot/ in some files
  262. s/pImage/uImage/ in some files
  263. * Patch by Detlev Zundel, 15 Jan 2003:
  264. Fix '' command line quoting
  265. * Patch by The LEOX team, 19 Jan 2003:
  266. - add support for the ELPT860 board
  267. - add support for Dallas ds164x RTC
  268. * Patches by David Müller, 31 Jan 2003:
  269. - minimal setup for CardBus bridges
  270. - add EEPROM read/write support in the CS8900 driver
  271. - add support for the builtin I2C controller in the Samsung s3c24x0 chips
  272. - add support for MPL's VCMA9 (Samsung s3c2410 based) board
  273. * Patch by Steven Scholz, 04 Feb 2003:
  274. add support for RTC DS1307
  275. * Patch by Reinhard Meyer, 5 Feb 2003:
  276. fix PLPRCR/SCCR init sequence on 8xx to allow for
  277. changes of EBDF by software
  278. * Patch by Vladimir Gurevich, 07 Feb 2003:
  279. "API-compatibility patch" for 4xx I2C driver
  280. * TRAB fixes / extensions:
  281. - Restore VFD brightness as saved in environment
  282. - add support for FGujitsu flashes
  283. - make sure both buzzers are turned off (drive low level)
  284. * Patches by Robert Schwebel, 06 Mar 2003:
  285. - fix bug in BOOTP code (must use NetCopyIP)
  286. - update of CSB226 port
  287. - clear BSS segment on XScale
  288. - added support for i2c_init_board() function
  289. - update to the Innokom plattform
  290. * Extend support for redundand environments for configurations where
  291. environment size < sector size
  292. * Patch by Rune Torgersen, 13 Feb 2003:
  293. Add support for Motorola MPC8266ADS board
  294. * Patch by Kyle Harris, 19 Feb 2003:
  295. patches for the Intel lubbock board:
  296. memsetup.S - general cleanup (based on Robert's csb226 code)
  297. flash.c - overhaul, actually works now
  298. lubbock.c - fix init funcs to return proper value
  299. * Patch by Kenneth Johansson, 26 Feb 2003:
  300. - Fixed off by one in RFTA calculation.
  301. - No need to abort when LDF is lower than we can program it's only
  302. minimum timing so clamp it to what we can do.
  303. - Takes function pointer to function for reading the spd_nvram. Usefull
  304. for faking data or hardcode a module without the nvram.
  305. - fix other user for above change
  306. - fix some comments.
  307. * Patches by Brian Waite, 26 Feb 2003:
  308. - fix port for evb64260 board
  309. - fix PCI for evb64260 board
  310. - fix PCI scan
  311. * Patch by Reinhard Meyer, 1 Mar 2003:
  312. Add support for EMK TOP860 Module
  313. * Patch by Yuli Barcohen, 02 Mar 2003:
  314. Add SPD EEPROM support for MPC8260ADS board
  315. * Patch by Robert Schwebel, 21 Jan 2003:
  316. - Add support for Innokom board
  317. - Don't complain if "install" fails
  318. - README cleanup (remove duplicated lines)
  319. - Update PXA header files
  320. * Add documentation for existing POST code (doc/README.POST)
  321. * Patch by Laudney Ren, 15 Jan 2003:
  322. Fix handling of redundand environment in "tools/envcrc.c"
  323. * Patch by Detlev Zundel, 28 Feb 2003:
  324. Add bedbug support for 824x systems
  325. * Add support for 16 MB flash configuration of TRAB board
  326. * Patch by Erwin Rol, 27 Feb 2003:
  327. Add support for RTEMS
  328. * Add image information to README
  329. * Patch by Stefan Roese, 18 Feb 2003:
  330. CPCIISER4 configuration updated.
  331. * Patch by Stefan Roese, 17 Feb 2003:
  332. Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
  333. * Patch by Stefan Roese, 13 Feb 2003:
  334. Add "pcidelay" environment variable (in ms, enabled via
  335. CONFIG_PCI_BOOTDELAY).
  336. PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
  337. RST# to respond to configuration cycles (33MHz -> 1s).
  338. * Fix dual PCMCIA slot support (when running with just one
  339. slot populated)
  340. * Add VFD type detection to trab board
  341. * extend drivers/cs8900.c driver to synchronize ethaddr environment
  342. variable with value in the EEPROM
  343. * Patch by Stefan Roese, 10 Feb 2003:
  344. Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
  345. * Add support for MIPS32 4Kc CPUs
  346. * Add support for INCA-IP Board
  347. ======================================================================
  348. Changes for U-Boot 0.2.2:
  349. ======================================================================
  350. * Add dual ethernet support on PM826
  351. * Add support for LXT971 PHY on PM826
  352. * Patch by Tord Andersson, 16 Jan 2003:
  353. Fix flash sector count for TQM8xxL
  354. * Fix I2C EEPROM problem on ICU862 board (would only write the first
  355. 16 bytes out of each 32 byte block)
  356. ======================================================================
  357. Changes for U-Boot 0.2.1:
  358. ======================================================================
  359. * Add support for V37 board
  360. (patch by Jón Benediktsson, 11 Dec 2002)
  361. * Update baudrate in bd_info when it gets changed
  362. * Add watchdog trigger points while waiting for serial port
  363. (so far only 8xx -- needed on LWMON with 100ms watchdog)
  364. * Improve command line tool to access the U-Boot's environment
  365. (figuration of the utility, using a config file)
  366. * Add single quote support for (old) command line parser
  367. * Switch LWMON board default config from FRAM to EEPROM;
  368. in POST, EEPROM shows up on 8 addresses
  369. ======================================================================
  370. Changes for U-Boot 0.2.0:
  371. ======================================================================
  372. * Use 1-byte-read instead of -write for iprobe() function
  373. Add i2c commands to PM826 config
  374. * extend I2C POST code: check for list on known addresses
  375. * Improve log buffer code; use "loglevel" to decide which messages
  376. to log on the console, too (like in Linux); get rid of "logstart"
  377. * Add command line tool to access the U-Boot's environment
  378. (board-specific for TRAB now, to be fixed later)
  379. * Patch by Hans-Joerg Frieden, 06 Dec 2002
  380. Fix misc problems with AmigaOne support
  381. * Patch by Chris Hallinan, 3 Dec 2002:
  382. minor cleanup to the MPC8245 EPIC driver
  383. * Patch by Pierre Aubert , 28 Nov 2002
  384. Add support for external (SIU) interrupts on MPC8xx
  385. * Patch by Pierre Aubert , 28 Nov 2002
  386. Fix nested syscalls bug in standalone applications
  387. * Patch by David Müller, 27 Nov 2002:
  388. fix output of "pciinfo" command for CardBus bridge devices.
  389. * Fix bug in TQM8260 board detection - boards got stuck when board ID
  390. was not readable
  391. * Add LED indication for IDE activity on KUP4K board
  392. * Fix startup problems with VFD display on TRAB
  393. * Patch by Pierre Aubert, 20 Nov 2002
  394. Add driver for Epson SED13806 graphic controller.
  395. Add support for BMP logos in cfb_console driver.
  396. * Added support for both PCMCIA slots (at the same time!) on MPC8xx
  397. * Patch by Rod Boyce, 21 Nov 2002:
  398. fix PCMCIA on MBX8xx board
  399. * Patch by Pierre Aubert , 21 Nov 2002
  400. Add CFG_CPM_POST_WORD_ADDR to make the offset of the
  401. bootmode word in DPRAM configurable
  402. * Patch by Daniel Engström, 18 Nov 2002:
  403. Fixes for x86 port (mostly strings issues)
  404. * Patch by Ken Chou, 18 Nov 2002:
  405. Fix for natsemi NIC cards (DP83815)
  406. * Patch by Pierre Aubert, 19 Nov 2002:
  407. fix a bug for the MII configuration, and some warnings
  408. * Patch by Thomas Frieden, 13 Nov 2002:
  409. Add code for AmigaOne board
  410. (preliminary merge to U-Boot, still WIP)
  411. * Patch by Jon Diekema, 12 Nov 2002:
  412. - Adding URL for IEEE OUI lookup
  413. - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
  414. being defined.
  415. - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
  416. root-on-nfs macros are designed to switch how the default boot
  417. method gets defined.
  418. * Patch by Daniel Engström, 13 Nov 2002:
  419. Add support for i386 architecture and AMD SC520 board
  420. * Patch by Pierre Aubert, 12 Nov 2002:
  421. Add support for DOS filesystem and booting from DOS floppy disk
  422. * Patch by Jim Sandoz, 07 Nov 2002:
  423. Increase number of network RX buffers (PKTBUFSRX in
  424. "include/net.h") for EEPRO100 based boards (especially SP8240)
  425. which showed "Receiver is not ready" errors when U-Boot was
  426. processing the receive buffers slower than the network controller
  427. was filling them.
  428. * Patch by Andreas Oberritter, 09 Nov 2002:
  429. Change behaviour of NetLoop(): return -1 for errors, filesize
  430. otherwise; return code 0 is valid an means no file loaded - in this
  431. case the environment still gets updated!
  432. * Patches by Jon Diekema, 9 Nov 2002:
  433. - improve ADC/DAC clocking on the SACSng board to align
  434. the failing edges of LRCLK and SCLK
  435. - sbc8260 configuration tweaks
  436. - add status LED support for 82xx systems
  437. - wire sspi/sspo commands into command handler; improved error
  438. handlering
  439. - add timestamp support and alternate memory test to the
  440. SACSng configuration
  441. * Patch by Vince Husovsky, 7 Nov 2002:
  442. Add "-n" to linker options to get rid of "Not enough room for
  443. program headers" problem
  444. * Patch by David Müller, 05 Nov 2002
  445. Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
  446. so we can use an already existing name
  447. * Patch by Pierre Aubert, 05 Nov 2002
  448. Hardware relatied improvments in FDC boot code
  449. * Patch by Holger Schurig, 5 Nov 2002:
  450. Make the PXA really change it's frequency
  451. * Patch by Pierre Aubert, 05 Nov 2002
  452. Add support for slave serial Spartan 2 FPGAs
  453. * Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
  454. drivers
  455. * Add support for log buffer which can be passed to Linux kernel's
  456. syslog mechanism; used especially for POST results.
  457. * Patch by Klaus Heydeck, 31 Oct 2002:
  458. Add initial support for kup4k board
  459. * Patch by Robert Schwebel, 04 Nov 2002:
  460. - use watchdog to reset PXA250 systems
  461. - added progress callbacks to (some of the) ARM code
  462. - update for Cogent CSB226 board
  463. * Add support for FPS860 board
  464. * Patch by Guillaume Alexandre,, 04 Nov 2002:
  465. Improve PCI access on 32-bits Compact PCI bus
  466. * Fix mdelay() on TRAB - this was still the debugging version with
  467. seconds instead of ms.
  468. * Patch by Robert Schwebel, 1 Nov 2002:
  469. XScale related cleanup (affects all ARM boards)
  470. * Cleanup of names and README.
  471. ======================================================================
  472. Notes for U-Boot 0.1.0:
  473. ======================================================================
  474. This is the initial version of "Das U-Boot", the Universal Boot Loader.
  475. It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
  476. For information about the history of the project please see the
  477. PPCBoot project page at http://sourceforge.net/projects/ppcboot
  478. ======================================================================