board/adp-ag102: add board specific files

Add board specific files.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

board/AndesTech/adp-ag102/Makefile

@@ -0,0 +1,43 @@
+#
+# Copyright (C) 2011 Andes Technology Corporation
+# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= adp-ag102.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+$(LIB):	$(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/AndesTech/adp-ag102/adp-ag102.c

@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+
+#include <faraday/ftsdc010.h>
+#ifdef CONFIG_FTSMC020
+#include <faraday/ftsmc020.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscellaneous platform dependent initializations
+ */
+
+int board_init(void)
+{
+	/*
+	 * refer to BOOT_PARAMETER_PA_BASE within
+	 * "linux/arch/nds32/include/asm/misc_spec.h"
+	 */
+	gd->bd->bi_arch_number = MACH_TYPE_ADPAG102;
+	gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
+
+#if !defined(CONFIG_SYS_NO_FLASH)
+	ftsmc020_init();	/* initialize Flash */
+#endif /* CONFIG_SYS_NO_FLASH */
+	return 0;
+}
+
+int dram_init(void)
+{
+	unsigned long sdram_base = PHYS_SDRAM_0;
+	unsigned long expected_size = PHYS_SDRAM_0_SIZE;
+	unsigned long actual_size;
+
+	actual_size = get_ram_size((void *)sdram_base, expected_size);
+
+	gd->ram_size = actual_size;
+
+	if (expected_size != actual_size) {
+		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
+				actual_size >> 20, expected_size >> 20);
+	}
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bd)
+{
+	return ftgmac100_initialize(bd);
+}
+
+#if !defined(CONFIG_SYS_NO_FLASH)
+ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
+{
+	if (banknum == 0) {	/* non-CFI boot flash */
+		info->portwidth = FLASH_CFI_8BIT;
+		info->chipwidth = FLASH_CFI_BY8;
+		info->interface = FLASH_CFI_X8;
+		return 1;
+	} else {
+		return 0;
+	}
+}
+#endif /* CONFIG_SYS_NO_FLASH */
+
+#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
+void pci_init_board(void)
+{
+	/* should be pci_ftpci100_init() */
+	extern void pci_ftpci_init();
+
+	pci_ftpci_init();
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	ftsdc010_mmc_init(0);
+	return 0;
+}
+#endif