board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS

Signed-off-by: Jon Loeliger <jdl@freescale.com>

board/MAI/AmigaOneG3SE/cmd_boota.c

@@ -119,7 +119,7 @@ int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 	return 0;
 }
-#if defined(CONFIG_AMIGAONEG3SE) && (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
+#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
 U_BOOT_CMD(
 	boota,   3,      1,      do_boota,
 	"boota   - boot an Amiga kernel\n",

board/MAI/menu/cmd_menu.c

@@ -7,7 +7,7 @@ int do_menu( cmd_tbl_t *cmdtp, /*bd_t *bd,*/ int flag, int argc, char *argv[] )
 	return 0;
 }
 
-#if defined(CONFIG_AMIGAONEG3SE) && (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
+#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
 U_BOOT_CMD(
 	menu,   1,      1,      do_menu,
 	"menu    - display BIOS setup menu\n",

board/Marvell/common/serial.c

@@ -145,7 +145,7 @@ void serial_puts (const char *s)
 	}
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 void kgdb_serial_init (void)
 {
 }

board/alaska/alaska.c

@@ -138,7 +138,7 @@ long int initdram (int board_type)
 	size = dramSetup ();
 
 /* if iCache ad dCache is defined */
-#if (CONFIG_COMMANDS & CFG_CMD_CACHE) || defined(CONFIG_CMD_CACHE)
+#if defined(CONFIG_CMD_CACHE)
 /*    setupBat(size);*/
 #endif
 

board/altera/dk1c20/dk1c20.c

@@ -55,7 +55,7 @@ long int initdram (int board_type)
 	return (0);
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
 int ide_preinit (void)
 {
 	nios_pio_t *present = (nios_pio_t *) CFG_CF_PRESENT;
@@ -78,4 +78,4 @@ int ide_preinit (void)
 
 	return 0;
 }
-#endif /* CONFIG_COMMANDS & CFG_CMD_IDE */
+#endif

board/amirix/ap1000/serial.c

@@ -84,7 +84,7 @@ void serial_puts (const char *s)
 	}
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 void kgdb_serial_init (void)
 {
 }

board/at91rm9200dk/at91rm9200dk.c

@@ -62,7 +62,7 @@ int dram_init (void)
 }
 
 #ifdef CONFIG_DRIVER_ETHER
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
 
 /*
  * Name:
@@ -82,14 +82,14 @@ void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
 	p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
 }
 
-#endif	/* CONFIG_COMMANDS & CFG_CMD_NET */
+#endif
 #endif	/* CONFIG_DRIVER_ETHER */
 
 /*
  * Disk On Chip (NAND) Millenium initialization.
  * The NAND lives in the CS2* space
  */
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
 extern ulong nand_probe (ulong physadr);
 
 #define AT91_SMARTMEDIA_BASE 0x40000000	/* physical address to access memory on NCS3 */

board/atc/atc.c

@@ -379,7 +379,7 @@ long int initdram (int board_type)
 	return (psize);
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
+#if defined(CONFIG_CMD_DOC)
 extern void doc_probe (ulong physadr);
 void doc_init (void)
 {

board/atc/ti113x.c

@@ -591,7 +591,7 @@ exit:
 	return rc;
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
 int pcmcia_off (void)
 {
 	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");

board/atmel/atstk1000/eth.c

@@ -27,7 +27,7 @@
 
 extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
 
-#if defined(CONFIG_MACB) && ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET))
+#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
 void atstk1000_eth_initialize(bd_t *bi)
 {
 	int id = 0;

board/bc3450/cmd_bc3450.c

@@ -30,7 +30,7 @@
 /*
  * BC3450 specific commands
  */
-#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
+#if defined(CONFIG_CMD_BSP)
 
 #undef DEBUG
 #ifdef DEBUG

board/bf537-stamp/bf537-stamp.c

@@ -159,7 +159,7 @@ int misc_init_r(void)
 	unsigned char *pMACaddr = (unsigned char *)0x203F0000;
 	u8 SrcAddr[6] = { 0x02, 0x80, 0xAD, 0x20, 0x31, 0xB8 };
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
 	/* The 0xFF check here is to make sure we don't use the address
 	 * in flash if it's simply been erased (aka all 0xFF values) */
 	if (getenv("ethaddr") == NULL && is_valid_ether_addr(pMACaddr)) {
@@ -171,7 +171,7 @@ int misc_init_r(void)
 	if (getenv("ethaddr")) {
 		SetupMacAddr(SrcAddr);
 	}
-#endif				/* CONFIG_COMMANDS & CFG_CMD_NET */
+#endif
 #endif				/* BFIN_BOOT_MODE == BF537_BYPASS_BOOT */
 
 #if defined(CONFIG_BFIN_IDE)

board/bf537-stamp/ether_bf537.c

@@ -42,7 +42,7 @@
 #define DEBUGF(fmt,args...)
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
 
 #define RXBUF_BASE_ADDR		0xFF900000
 #define TXBUF_BASE_ADDR		0xFF800000

board/bf537-stamp/nand.c

@@ -23,7 +23,7 @@
 #include <common.h>
 #include <asm/io.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
 
 #include <nand.h>
 
@@ -103,4 +103,4 @@ void board_nand_init(struct nand_chip *nand)
 	nand->dev_ready = bfin_device_ready;
 	nand->chip_delay = 30;
 }
-#endif				/* (CONFIG_COMMANDS & CFG_CMD_NAND) */
+#endif

board/c2mon/pcmcia.c

@@ -4,11 +4,11 @@
 
 #undef	CONFIG_PCMCIA
 
-#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if	defined(CONFIG_CMD_PCMCIA)
 #define	CONFIG_PCMCIA
 #endif
 
-#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
 #define	CONFIG_PCMCIA
 #endif
 
@@ -165,7 +165,7 @@ int pcmcia_hardware_enable(int slot)
 }
 
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
 int pcmcia_hardware_disable(int slot)
 {
 	volatile immap_t	*immap;

board/cmc_pu2/cmc_pu2.c

@@ -155,7 +155,7 @@ int hw_detect (void)
 }
 
 #ifdef CONFIG_DRIVER_ETHER
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
 
 /*
  * Name:
@@ -175,5 +175,5 @@ void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
 	p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
 }
 
-#endif	/* CONFIG_COMMANDS & CFG_CMD_NET */
+#endif
 #endif	/* CONFIG_DRIVER_ETHER */

board/cogent/serial.c

@@ -90,7 +90,7 @@ int serial_tstc (void)
 
 #endif /* CONS_NONE */
 
-#if ((CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)) && \
+#if defined(CONFIG_CMD_KGDB) && \
     defined(CONFIG_KGDB_NONE)
 
 #if CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX

board/cpc45/cpc45.c

@@ -240,7 +240,7 @@ int sysControlDisplay (int digit,	/* number of digit 0..7 */
 	return (0);
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
 
 #ifdef CFG_PCMCIA_MEM_ADDR
 volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;

board/cpc45/pd67290.c

@@ -772,7 +772,7 @@ exit:
 	return rc;
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
 int pcmcia_off (void)
 {
 	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");

board/cpu86/cpu86.c

@@ -312,7 +312,7 @@ long int initdram (int board_type)
 	return (psize);
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
+#if defined(CONFIG_CMD_DOC)
 extern void doc_probe (ulong physadr);
 void doc_init (void)
 {

board/cpu87/cpu87.c

@@ -321,7 +321,7 @@ long int initdram (int board_type)
 	return (psize);
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
+#if defined(CONFIG_CMD_DOC)
 extern void doc_probe (ulong physadr);
 void doc_init (void)
 {

board/csb637/csb637.c

@@ -57,7 +57,7 @@ int dram_init (void)
 }
 
 #ifdef CONFIG_DRIVER_ETHER
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
 
 /*
  * Name:
@@ -77,5 +77,5 @@ void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
 	p_phyops->AutoNegotiate	 = bcm5221_AutoNegotiate;
 }
 
-#endif	/* CONFIG_COMMANDS & CFG_CMD_NET */
+#endif
 #endif	/* CONFIG_DRIVER_ETHER */