OMAP3 Move twl4030 mmc function

Because twl4030 now has its own device files, move and rename
twl4030_mmc_config.

twl4030_mmc_config initializes the twl4030 power setting to
the mmc device.  Because it is in the twl4030 power domain, move
it out of drivers/mmc/omap3_mmc.c and into drivers/power/twl4030.c.

The function was renamed to twl4030_power_mmc_init because all
the functions in this file are to have the format

twl4030_power_<device>_<action>

In this case the suffix is mmc_init so
device : mmc
action : init

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Heiko Schocher <hs@denx.de>

drivers/mmc/omap3_mmc.c

@@ -28,6 +28,7 @@
 #include <mmc.h>
 #include <part.h>
 #include <i2c.h>
+#include <twl4030.h>
 #include <asm/io.h>
 #include <asm/arch/mmc.h>
 
@@ -58,21 +59,11 @@ block_dev_desc_t *mmc_get_dev(int dev)
 	return (block_dev_desc_t *) &mmc_blk_dev;
 }
 
-void twl4030_mmc_config(void)
-{
-	unsigned char data;
-
-	data = DEV_GRP_P1;
-	i2c_write(PWRMGT_ADDR_ID4, VMMC1_DEV_GRP, 1, &data, 1);
-	data = VMMC1_VSEL_30;
-	i2c_write(PWRMGT_ADDR_ID4, VMMC1_DEDICATED, 1, &data, 1);
-}
-
 unsigned char mmc_board_init(void)
 {
 	t2_t *t2_base = (t2_t *)T2_BASE;
 
-	twl4030_mmc_config();
+	twl4030_power_mmc_init();
 
 	writel(readl(&t2_base->pbias_lite) | PBIASLITEPWRDNZ1 |
 		PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,

drivers/power/twl4030.c

@@ -98,3 +98,18 @@ void twl4030_power_init(void)
 			     TWL4030_PM_RECEIVER_VDAC_DEDICATED);
 }
 
+#define VMMC1_VSEL_30		0x02
+
+void twl4030_power_mmc_init(void)
+{
+	unsigned char byte;
+
+	byte = DEV_GRP_P1;
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+			     TWL4030_PM_RECEIVER_VMMC1_DEV_GRP);
+
+	/* 3 Volts */
+	byte = VMMC1_VSEL_30;
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+			     TWL4030_PM_RECEIVER_VMMC1_DEDICATED);
+}

include/configs/omap3_evm.h

@@ -127,6 +127,11 @@
 #define CONFIG_SYS_I2C_BUS_SELECT	1
 #define CONFIG_DRIVER_OMAP34XX_I2C	1
 
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER		1
+
 /*
  * Board NAND Info.
  */

include/twl4030.h

@@ -390,6 +390,9 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
 void twl4030_power_reset_init(void);
 /* For initializing power device */
 void twl4030_power_init(void);
+/* For initializing mmc power */
+void twl4030_power_mmc_init(void);
+
 /*
  * LED
  */