cosmetic: spell fixes etc.

Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Acked-by: Detlev Zundel <dzu@denx.de>

README

@@ -1723,12 +1723,12 @@ The following options need to be configured:
 		=>
 
 		If you now switch to the new I2C Bus 3 with "i2c dev 3"
-		u-boot sends First the Commando to the mux@70 to enable
-		channel 6, and then the Commando to the mux@71 to enable
+		u-boot first sends the command to the mux@70 to enable
+		channel 6, and then the command to the mux@71 to enable
 		the channel 4.
 
 		After that, you can use the "normal" i2c commands as
-		usual, to communicate with your I2C devices behind
+		usual to communicate with your I2C devices behind
 		the 2 muxes.
 
 		This option is actually implemented for the bitbanging

arch/arm/include/asm/global_data.h

@@ -24,7 +24,7 @@
 #ifndef	__ASM_GBL_DATA_H
 #define __ASM_GBL_DATA_H
 /*
- * The following data structure is placed in some memory wich is
+ * The following data structure is placed in some memory which is
  * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
  * some locked parts of the data cache) to allow for a minimum set of
  * global variables during system initialization (until we have set

common/cmd_eeprom.c

@@ -250,7 +250,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 
 		/*
 		 * For a FRAM device there is no limit on the number of the
-		 * bytes that can be ccessed with the single read or write
+		 * bytes that can be accessed with the single read or write
 		 * operation.
 		 */
 #if !defined(CONFIG_SYS_I2C_FRAM)

common/cmd_i2c.c

@@ -1397,8 +1397,8 @@ static int i2c_mux_get_busid (void)
 	return tmp;
 }
 
-/* Analyses a Muxstring and sends immediately the
-   Commands to the Muxes. Runs from Flash.
+/* Analyses a Muxstring and immediately sends the
+   commands to the muxes. Runs from flash.
  */
 int i2c_mux_ident_muxstring_f (uchar *buf)
 {

drivers/i2c/omap24xx_i2c.c

@@ -399,7 +399,7 @@ static void wait_for_bb (void)
 	int timeout = I2C_TIMEOUT;
 	u16 stat;
 
-	writew(0xFFFF, &i2c_base->stat);	 /* clear current interruts...*/
+	writew(0xFFFF, &i2c_base->stat);	/* clear current interrupts...*/
 	while ((stat = readw (&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
 		writew (stat, &i2c_base->stat);
 		udelay(1000);

include/altera.h

@@ -51,18 +51,18 @@ typedef enum {				/* typedef Altera_iface */
 	passive_parallel_asynchronous,	/* parallel data */
 	passive_serial_asynchronous,	/* serial data w/ internal clock (not used)	*/
 	altera_jtag_mode,		/* jtag/tap serial (not used ) */
-	fast_passive_parallel,	/* fast passive parallel (FPP) */
+	fast_passive_parallel,		/* fast passive parallel (FPP) */
 	fast_passive_parallel_security,	/* fast passive parallel with security (FPPS) */
 	max_altera_iface_type		/* insert all new types before this */
 } Altera_iface;				/* end, typedef Altera_iface */
 
 typedef enum {			/* typedef Altera_Family */
-    min_altera_type,		/* insert all new types after this */
-    Altera_ACEX1K,		/* ACEX1K Family */
-    Altera_CYC2,		/* CYCLONII Family */
+	min_altera_type,	/* insert all new types after this */
+	Altera_ACEX1K,		/* ACEX1K Family */
+	Altera_CYC2,		/* CYCLONII Family */
 	Altera_StratixII,	/* StratixII Familiy */
 /* Add new models here */
-    max_altera_type		/* insert all new types before this */
+	max_altera_type		/* insert all new types before this */
 } Altera_Family;		/* end, typedef Altera_Family */
 
 typedef struct {		/* typedef Altera_desc */