AT91: Board fix for AT91SAM9261-EK

Fix board part of AT91SAM9261-EK according to the new scheme

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Makefile

@@ -802,29 +802,6 @@ M5485HFE_config :	unconfig
 ## ARM926EJ-S Systems
 #########################################################################
 
-at91sam9261ek_nandflash_config \
-at91sam9261ek_dataflash_cs0_config \
-at91sam9261ek_dataflash_cs3_config \
-at91sam9261ek_config \
-at91sam9g10ek_nandflash_config \
-at91sam9g10ek_dataflash_cs0_config \
-at91sam9g10ek_dataflash_cs3_config \
-at91sam9g10ek_config	:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring 9g10,$@)" ] ; then \
-		echo "#define CONFIG_AT91SAM9G10EK 1"	>>$(obj)include/config.h ; \
-	else \
-		echo "#define CONFIG_AT91SAM9261EK 1"	>>$(obj)include/config.h ; \
-	fi;
-	@if [ "$(findstring _nandflash,$@)" ] ; then \
-		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
-	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
-		echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"	>>$(obj)include/config.h ; \
-	else \
-		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
-	fi;
-	@$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
-
 at91sam9263ek_norflash_config \
 at91sam9263ek_norflash_boot_config \
 at91sam9263ek_nandflash_config \

board/atmel/at91sam9261ek/at91sam9261ek.c

@@ -23,6 +23,7 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
 #include <asm/arch/at91sam9261.h>
 #include <asm/arch/at91sam9261_matrix.h>
 #include <asm/arch/at91sam9_smc.h>
@@ -31,7 +32,6 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
 #include <lcd.h>
 #include <atmel_lcdc.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
@@ -49,44 +49,48 @@ DECLARE_GLOBAL_DATA_PTR;
 #ifdef CONFIG_CMD_NAND
 static void at91sam9261ek_nand_hw_init(void)
 {
+	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	unsigned long csa;
 
 	/* Enable CS3 */
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA,
-		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+	csa = readl(&matrix->ebicsa);
+	csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
+
+	writel(csa, &matrix->ebicsa);
 
 	/* Configure SMC CS3 for NAND/SmartMedia */
 #ifdef CONFIG_AT91SAM9G10EK
-	at91_sys_write(AT91_SMC_SETUP(3),
-		       AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
-		       AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
-	at91_sys_write(AT91_SMC_PULSE(3),
-		       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) |
-		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7));
-	at91_sys_write(AT91_SMC_CYCLE(3),
-		       AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+	writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
+		AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+		&smc->cs[3].setup);
+	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(7) |
+		AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(7),
+		&smc->cs[3].pulse);
+	writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
+		&smc->cs[3].cycle);
 #else
-	at91_sys_write(AT91_SMC_SETUP(3),
-		       AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
-		       AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
-	at91_sys_write(AT91_SMC_PULSE(3),
-		       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
-		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-	at91_sys_write(AT91_SMC_CYCLE(3),
-		       AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+		AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+		&smc->cs[3].setup);
+	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+		AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+		&smc->cs[3].pulse);
+	writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+		&smc->cs[3].cycle);
 #endif
-	at91_sys_write(AT91_SMC_MODE(3),
-		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-		       AT91_SMC_EXNWMODE_DISABLE |
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+		       AT91_SMC_MODE_EXNW_DISABLE |
 #ifdef CONFIG_SYS_NAND_DBW_16
-		       AT91_SMC_DBW_16 |
+		       AT91_SMC_MODE_DBW_16 |
 #else /* CONFIG_SYS_NAND_DBW_8 */
-		       AT91_SMC_DBW_8 |
+		       AT91_SMC_MODE_DBW_8 |
 #endif
-		       AT91_SMC_TDF_(2));
+		       AT91_SMC_MODE_TDF_CYCLE(2),
+		       &smc->cs[3].mode);
 
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
+	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
 
 	/* Configure RDY/BSY */
 	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
@@ -102,35 +106,37 @@ static void at91sam9261ek_nand_hw_init(void)
 #ifdef CONFIG_DRIVER_DM9000
 static void at91sam9261ek_dm9000_hw_init(void)
 {
+	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+
 	/* Configure SMC CS2 for DM9000 */
 #ifdef CONFIG_AT91SAM9G10EK
-	at91_sys_write(AT91_SMC_SETUP(2),
-		       AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) |
-		       AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0));
-	at91_sys_write(AT91_SMC_PULSE(2),
-		       AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) |
-		       AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8));
-	at91_sys_write(AT91_SMC_CYCLE(2),
-		       AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20));
-	at91_sys_write(AT91_SMC_MODE(2),
-		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-		       AT91_SMC_EXNWMODE_DISABLE |
-		       AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
-		       AT91_SMC_TDF_(1));
+	writel(AT91_SMC_SETUP_NWE(3) | AT91_SMC_SETUP_NCS_WR(0) |
+		AT91_SMC_SETUP_NRD(3) | AT91_SMC_SETUP_NCS_RD(0),
+		&smc->cs[2].setup);
+	writel(AT91_SMC_PULSE_NWE(6) | AT91_SMC_PULSE_NCS_WR(8) |
+		AT91_SMC_PULSE_NRD(6) | AT91_SMC_PULSE_NCS_RD(8),
+		&smc->cs[2].pulse);
+	writel(AT91_SMC_CYCLE_NWE(20) | AT91_SMC_CYCLE_NRD(20),
+		&smc->cs[2].cycle);
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+		       AT91_SMC_MODE_EXNW_DISABLE |
+		       AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 |
+		       AT91_SMC_MODE_TDF_CYCLE(1),
+		       &smc->cs[2].mode);
 #else
-	at91_sys_write(AT91_SMC_SETUP(2),
-		       AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
-		       AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
-	at91_sys_write(AT91_SMC_PULSE(2),
-		       AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) |
-		       AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
-	at91_sys_write(AT91_SMC_CYCLE(2),
-		       AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
-	at91_sys_write(AT91_SMC_MODE(2),
-		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-		       AT91_SMC_EXNWMODE_DISABLE |
-		       AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
-		       AT91_SMC_TDF_(1));
+	writel(AT91_SMC_SETUP_NWE(3) | AT91_SMC_SETUP_NCS_WR(0) |
+		AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+		&smc->cs[2].setup);
+	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(8) |
+		AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(8),
+		&smc->cs[2].pulse);
+	writel(AT91_SMC_CYCLE_NWE(16) | AT91_SMC_CYCLE_NRD(16),
+		&smc->cs[2].cycle);
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+		       AT91_SMC_MODE_EXNW_DISABLE |
+		       AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 |
+		       AT91_SMC_MODE_TDF_CYCLE(1),
+		       &smc->cs[2].mode);
 #endif
 
 	/* Configure Reset signal as output */
@@ -156,7 +162,7 @@ vidinfo_t panel_info = {
 	vl_vsync_len:	1,
 	vl_upper_margin:1,
 	vl_lower_margin:0,
-	mmio:		AT91SAM9261_LCDC_BASE,
+	mmio:		ATMEL_BASE_LCDC,
 };
 
 void lcd_enable(void)
@@ -171,6 +177,8 @@ void lcd_disable(void)
 
 static void at91sam9261ek_lcd_hw_init(void)
 {
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
 	at91_set_A_periph(AT91_PIN_PB1, 0);	/* LCDHSYNC */
 	at91_set_A_periph(AT91_PIN_PB2, 0);	/* LCDDOTCK */
 	at91_set_A_periph(AT91_PIN_PB3, 0);	/* LCDDEN */
@@ -194,12 +202,11 @@ static void at91sam9261ek_lcd_hw_init(void)
 	at91_set_B_periph(AT91_PIN_PB27, 0);	/* LCDD22 */
 	at91_set_B_periph(AT91_PIN_PB28, 0);	/* LCDD23 */
 
-	at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
+	writel(AT91_PMC_HCK1, &pmc->scer);
 
-#ifdef CONFIG_AT91SAM9G10EK
-	gd->fb_base = CONFIG_AT91SAM9G10_LCD_BASE;
-#else
-	gd->fb_base = AT91SAM9261_SRAM_BASE;
+	/* For 9G10EK, let U-Boot allocate the framebuffer in SDRAM */
+#ifdef CONFIG_AT91SAM9261EK
+	gd->fb_base = ATMEL_BASE_SRAM;
 #endif
 }
 
@@ -217,7 +224,7 @@ void lcd_show_board_info(void)
 	lcd_printf ("(C) 2008 ATMEL Corp\n");
 	lcd_printf ("at91support@atmel.com\n");
 	lcd_printf ("%s CPU at %s MHz\n",
-		CONFIG_SYS_AT91_CPU_NAME,
+		ATMEL_CPU_NAME,
 		strmhz(temp, get_cpu_clk_rate()));
 
 	dram_size = 0;
@@ -246,9 +253,9 @@ int board_init(void)
 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
 #endif
 	/* adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-	at91_serial_hw_init();
+	at91_seriald_hw_init();
 #ifdef CONFIG_CMD_NAND
 	at91sam9261ek_nand_hw_init();
 #endif
@@ -273,8 +280,9 @@ int board_eth_init(bd_t *bis)
 
 int dram_init(void)
 {
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+		CONFIG_SYS_SDRAM_SIZE);
+
 	return 0;
 }
 

board/atmel/at91sam9261ek/config.mk

@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000

board/atmel/at91sam9261ek/led.c

@@ -26,12 +26,15 @@
 #include <asm/arch/at91sam9261.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/io.h>
 
 void coloured_LED_init(void)
 {
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
 	/* Enable clock */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA);
+	writel(ATMEL_ID_PIOA, &pmc->pcer);
 
 	at91_set_gpio_output(CONFIG_RED_LED, 1);
 	at91_set_gpio_output(CONFIG_GREEN_LED, 1);

boards.cfg

@@ -77,6 +77,12 @@ at91cap9adk                  arm         arm926ejs   -                   atmel
 at91sam9260ek_nandflash      arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9260,SYS_USE_NANDFLASH
 at91sam9260ek_dataflash_cs0  arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS0
 at91sam9260ek_dataflash_cs1  arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS1
+at91sam9261ek_nandflash      arm         arm926ejs   at91sam9261ek       atmel          at91        at91sam9261ek:AT91SAM9261,SYS_USE_NANDFLASH
+at91sam9261ek_dataflash_cs0  arm         arm926ejs   at91sam9261ek       atmel          at91        at91sam9261ek:AT91SAM9261,SYS_USE_DATAFLASH_CS0
+at91sam9261ek_dataflash_cs3  arm         arm926ejs   at91sam9261ek       atmel          at91        at91sam9261ek:AT91SAM9261,SYS_USE_DATAFLASH_CS3
+at91sam9g10ek_nandflash      arm         arm926ejs   at91sam9261ek       atmel          at91        at91sam9261ek:AT91SAM9G10,SYS_USE_NANDFLASH
+at91sam9g10ek_dataflash_cs0  arm         arm926ejs   at91sam9261ek       atmel          at91        at91sam9261ek:AT91SAM9G10,SYS_USE_DATAFLASH_CS0
+at91sam9g10ek_dataflash_cs3  arm         arm926ejs   at91sam9261ek       atmel          at91        at91sam9261ek:AT91SAM9G10,SYS_USE_DATAFLASH_CS3
 at91sam9g20ek_nandflash      arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH
 at91sam9g20ek_dataflash_cs0  arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0
 at91sam9g20ek_dataflash_cs1  arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1

include/configs/at91sam9261ek.h

@@ -27,52 +27,62 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_AT91_LEGACY
-
 /* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* 18.432 MHz crystal */
-#define CONFIG_SYS_HZ		1000
+#define CONFIG_SYS_HZ			1000
 
-#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
-#ifdef CONFIG_AT91SAM9G10EK
-#define CONFIG_AT91SAM9G10	1	/* It's an Atmel AT91SAM9G10 SoC*/
+#ifdef CONFIG_AT91SAM9G10
+#define CONFIG_AT91SAM9G10EK		/* It's an Atmel AT91SAM9G10 EK*/
 #else
-#define CONFIG_AT91SAM9261	1	/* It's an Atmel AT91SAM9261 SoC*/
+#define CONFIG_AT91SAM9261EK		/* It's an Atmel AT91SAM9261 EK*/
 #endif
+
+#include <asm/hardware.h>
+
 #define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
 
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	1
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_ATMEL_LEGACY
+#define CONFIG_SYS_TEXT_BASE		0x21f00000
+
 /*
  * Hardware drivers
  */
-#define CONFIG_AT91_GPIO	1
-#define CONFIG_ATMEL_USART	1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* gpio */
+#define CONFIG_AT91_GPIO
+#define CONFIG_AT91_GPIO_PULLUP		1
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
+#define CONFIG_USART_ID			ATMEL_ID_SYS
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200, 57600, 38400, 19200, 9600}
 
 /* LCD */
-#define CONFIG_LCD			1
+#define CONFIG_LCD
 #define LCD_BPP				LCD_COLOR8
-#define CONFIG_LCD_LOGO			1
+#define CONFIG_LCD_LOGO
 #undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO			1
-#define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CONFIG_SYS_WHITE_ON_BLACK		1
-#define CONFIG_ATMEL_LCD		1
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_LCD
 #ifdef CONFIG_AT91SAM9261EK
-#define CONFIG_ATMEL_LCD_BGR555		1
-#else
-#define	CONFIG_AT91SAM9G10_LCD_BASE		0x23E00000	/* LCD is no more in SRAM */
+#define CONFIG_ATMEL_LCD_BGR555
 #endif
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /* LED */
 #define CONFIG_AT91_LED
@@ -85,10 +95,10 @@
 /*
  * BOOTP options
  */
-#define CONFIG_BOOTP_BOOTFILESIZE	1
-#define CONFIG_BOOTP_BOOTPATH		1
-#define CONFIG_BOOTP_GATEWAY		1
-#define CONFIG_BOOTP_HOSTNAME		1
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
@@ -101,33 +111,35 @@
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_SOURCE
 
-#define CONFIG_CMD_PING		1
-#define CONFIG_CMD_DHCP		1
-#define CONFIG_CMD_NAND		1
-#define CONFIG_CMD_USB		1
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_USB
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM			0x20000000
-#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
+#define CONFIG_SYS_SDRAM_BASE		0x20000000
+#define CONFIG_SYS_SDRAM_SIZE		0x04000000
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH		1
+#define CONFIG_HAS_DATAFLASH
 #define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* CS3 */
-#define AT91_SPI_CLK			15000000
-#define DATAFLASH_TCSS			(0x1a << 16)
-#define DATAFLASH_TCHS			(0x1 << 24)
+#define AT91_SPI_CLK				15000000
+#define DATAFLASH_TCSS				(0x1a << 16)
+#define DATAFLASH_TCHS				(0x1 << 24)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			0x40000000
-#define CONFIG_SYS_NAND_DBW_8			1
+#define CONFIG_SYS_NAND_DBW_8
 /* our ALE is AD22 */
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 22)
 /* our CLE is AD21 */
@@ -138,24 +150,24 @@
 #endif
 
 /* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH			1
+#define CONFIG_SYS_NO_FLASH
 
 /* Ethernet */
-#define CONFIG_NET_MULTI		1
-#define CONFIG_DRIVER_DM9000		1
+#define CONFIG_NET_MULTI
+#define CONFIG_DRIVER_DM9000
 #define CONFIG_DM9000_BASE		0x30000000
 #define DM9000_IO			CONFIG_DM9000_BASE
 #define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
-#define CONFIG_DM9000_USE_16BIT		1
-#define CONFIG_DM9000_NO_SROM		1
+#define CONFIG_DM9000_USE_16BIT
+#define CONFIG_DM9000_NO_SROM
 #define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_RESET_PHY_R		1
+#define CONFIG_RESET_PHY_R
 
 /* USB */
 #define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW		1
-#define CONFIG_DOS_PARTITION		1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9261_UHP_BASE */
 #ifdef CONFIG_AT91SAM9G10EK
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9g10"
@@ -163,18 +175,18 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9261"
 #endif
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE		1
-#define CONFIG_CMD_FAT			1
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_FAT
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
-#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END			0x23e00000
 
 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_ENV_IS_IN_DATAFLASH
 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 #define CONFIG_ENV_OFFSET	0x4200
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
@@ -188,7 +200,7 @@
 #elif CONFIG_SYS_USE_DATAFLASH_CS3
 
 /* bootstrap + u-boot + env + linux in dataflash on CS3 */
-#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_ENV_IS_IN_DATAFLASH
 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
 #define CONFIG_ENV_OFFSET	0x4200
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
@@ -202,7 +214,7 @@
 #else /* CONFIG_SYS_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0x60000
 #define CONFIG_ENV_OFFSET_REDUND	0x80000
 #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
@@ -216,22 +228,19 @@
 
 #endif
 
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
-
 #define CONFIG_SYS_PROMPT		"U-Boot> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP		1
-#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 
-#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+#define CONFIG_STACKSIZE		(32*1024)	/* regular stack */
 
 #ifdef CONFIG_USE_IRQ
 #error CONFIG_USE_IRQ not supported