83xx/85xx/86xx: LBC register cleanup

Currently, 83xx, 86xx, and 85xx have a lot of duplicated code
dedicated to defining and manipulating the LBC registers.  Merge
this into a single spot.

To do this, we have to decide on a common name for the data structure
that holds the lbc registers - it will now be known as fsl_lbc_t, and we
adopt a common name for the immap layouts that include the lbc - this was
previously known as either im_lbc or lbus; use the former.

In addition, create accessors for the BR/OR regs that use in/out_be32
and use those instead of the mismash of access methods currently in play.

I have done a successful ppc build all and tested a board or two from
each processor family.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/cpu/mpc83xx/cpu.c

@@ -157,16 +157,16 @@ int checkcpu(void)
 void upmconfig (uint upm, uint *table, uint size)
 {
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbus = &immap->lbus;
+	volatile fsl_lbc_t *lbc = &immap->im_lbc;
 	volatile uchar *dummy = NULL;
 	const u32 msel = (upm + 4) << BR_MSEL_SHIFT;	/* What the MSEL field in BRn should be */
-	volatile u32 *mxmr = &lbus->mamr + upm;	/* Pointer to mamr, mbmr, or mcmr */
+	volatile u32 *mxmr = &lbc->mamr + upm;	/* ptr to mamr, mbmr, or mcmr */
 	uint i;
 
-	/* Scan all the banks to determine the base address of the device */
+	/* Find the address for the dummy write transaction */
 	for (i = 0; i < 8; i++) {
-		if ((lbus->bank[i].br & BR_MSEL) == msel) {
-			dummy = (uchar *) (lbus->bank[i].br & BR_BA);
+		if ((get_lbc_br(i) & BR_MSEL) == msel) {
+			dummy = (uchar *) (get_lbc_br(i) & BR_BA);
 			break;
 		}
 	}
@@ -180,7 +180,7 @@ void upmconfig (uint upm, uint *table, uint size)
 	*mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
 
 	for (i = 0; i < size; i++) {
-		lbus->mdr = table[i];
+		lbc->mdr = table[i];
 		__asm__ __volatile__ ("sync");
 		*dummy = 0;	/* Write the value to memory and increment MAD */
 		__asm__ __volatile__ ("sync");

arch/powerpc/cpu/mpc83xx/cpu_init.c

@@ -236,8 +236,8 @@ void cpu_init_f (volatile immap_t * im)
 	/* LCRR - Clock Ratio Register (10.3.1.16)
 	 * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description
 	 */
-	clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val);
-	__raw_readl(&im->lbus.lcrr);
+	clrsetbits_be32(&im->im_lbc.lcrr, lcrr_mask, lcrr_val);
+	__raw_readl(&im->im_lbc.lcrr);
 	isync();
 
 	/* Enable Time Base & Decrementer ( so we will have udelay() )*/
@@ -267,80 +267,41 @@ void cpu_init_f (volatile immap_t * im)
 	/* Config QE ioports */
 	config_qe_ioports();
 #endif
+	/* Set up preliminary BR/OR regs */
+	init_early_memctl_regs();
 
-	/*
-	 * Memory Controller:
-	 */
-
-	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
-	 * addresses - these have to be modified later when FLASH size
-	 * has been determined
-	 */
-
-#if defined(CONFIG_SYS_BR0_PRELIM)  \
-	&& defined(CONFIG_SYS_OR0_PRELIM) \
-	&& defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \
-	&& defined(CONFIG_SYS_LBLAWAR0_PRELIM)
-	im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM;
-	im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM;
+	/* Local Access window setup */
+#if defined(CONFIG_SYS_LBLAWBAR0_PRELIM) && defined(CONFIG_SYS_LBLAWAR0_PRELIM)
 	im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM;
 	im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM;
 #else
-#error	CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined
+#error	CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined
 #endif
 
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
-	im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM;
-	im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM)
 	im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM;
 	im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
-	im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM;
-	im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
 	im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM;
 	im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
-	im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM;
-	im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM)
 	im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM;
 	im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
-	im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM;
-	im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM)
 	im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM;
 	im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
-	im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM;
-	im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM)
 	im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM;
 	im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
-	im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM;
-	im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM)
 	im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM;
 	im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
-	im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM;
-	im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM)
 	im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM;
 	im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM;

arch/powerpc/cpu/mpc83xx/nand_init.c

@@ -88,8 +88,8 @@ void cpu_init_f (volatile immap_t * im)
 	&& defined(CONFIG_SYS_NAND_OR_PRELIM) \
 	&& defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \
 	&& defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM)
-	im->lbus.bank[0].br = CONFIG_SYS_NAND_BR_PRELIM;
-	im->lbus.bank[0].or = CONFIG_SYS_NAND_OR_PRELIM;
+	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
+	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
 	im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM;
 	im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM;
 #else

arch/powerpc/cpu/mpc83xx/speed.c

@@ -393,7 +393,7 @@ int get_clocks(void)
 
 	lbiu_clk = csb_clk *
 	           (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
-	lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
+	lcrr = (im->im_lbc.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
 	switch (lcrr) {
 	case 2:
 	case 4:

arch/powerpc/cpu/mpc85xx/cpu.c

@@ -257,8 +257,7 @@ void upmconfig (uint upm, uint * table, uint size)
 {
 	int i, mdr, mad, old_mad = 0;
 	volatile u32 *mxmr;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-	volatile u32 *brp,*orp;
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	volatile u8* dummy = NULL;
 	int upmmask;
 
@@ -281,12 +280,9 @@ void upmconfig (uint upm, uint * table, uint size)
 	}
 
 	/* Find the address for the dummy write transaction */
-	for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8;
-		 i++, brp += 2, orp += 2) {
-
-		/* Look for a valid BR with selected UPM */
-		if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) {
-			dummy = (volatile u8*)(in_be32(brp) & BR_BA);
+	for (i = 0; i < 8; i++) {
+		if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) {
+			dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA);
 			break;
 		}
 	}

arch/powerpc/cpu/mpc85xx/cpu_init.c

@@ -154,7 +154,6 @@ static void corenet_tb_init(void)
 
 void cpu_init_f (void)
 {
-	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	extern void m8560_cpm_reset (void);
 #ifdef CONFIG_MPC8548
 	ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
@@ -177,60 +176,7 @@ void cpu_init_f (void)
 	config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
 #endif
 
-	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
-	 * addresses - these have to be modified later when FLASH size
-	 * has been determined
-	 */
-#if defined(CONFIG_SYS_OR0_REMAP)
-	out_be32(&memctl->or0, CONFIG_SYS_OR0_REMAP);
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
-	out_be32(&memctl->or1, CONFIG_SYS_OR1_REMAP);
-#endif
-
-	/* now restrict to preliminary range */
-	/* if cs1 is already set via debugger, leave cs0/cs1 alone */
-	if (! memctl->br1 & 1) {
-#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
-		out_be32(&memctl->br0, CONFIG_SYS_BR0_PRELIM);
-		out_be32(&memctl->or0, CONFIG_SYS_OR0_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
-		out_be32(&memctl->or1, CONFIG_SYS_OR1_PRELIM);
-		out_be32(&memctl->br1, CONFIG_SYS_BR1_PRELIM);
-#endif
-	}
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
-	out_be32(&memctl->or2, CONFIG_SYS_OR2_PRELIM);
-	out_be32(&memctl->br2, CONFIG_SYS_BR2_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
-	out_be32(&memctl->or3, CONFIG_SYS_OR3_PRELIM);
-	out_be32(&memctl->br3, CONFIG_SYS_BR3_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
-	out_be32(&memctl->or4, CONFIG_SYS_OR4_PRELIM);
-	out_be32(&memctl->br4, CONFIG_SYS_BR4_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
-	out_be32(&memctl->or5, CONFIG_SYS_OR5_PRELIM);
-	out_be32(&memctl->br5, CONFIG_SYS_BR5_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
-	out_be32(&memctl->or6, CONFIG_SYS_OR6_PRELIM);
-	out_be32(&memctl->br6, CONFIG_SYS_BR6_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
-	out_be32(&memctl->or7, CONFIG_SYS_OR7_PRELIM);
-	out_be32(&memctl->br7, CONFIG_SYS_BR7_PRELIM);
-#endif
+       init_early_memctl_regs();
 
 #if defined(CONFIG_CPM2)
 	m8560_cpm_reset();
@@ -263,7 +209,7 @@ void cpu_init_f (void)
 int cpu_init_r(void)
 {
 #ifdef CONFIG_SYS_LBC_LCRR
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 #endif
 
 	puts ("L2:    ");

arch/powerpc/cpu/mpc85xx/cpu_init_nand.c

@@ -25,7 +25,7 @@
 
 void cpu_init_f(void)
 {
-	ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	/*
 	 * LCRR - Clock Ratio Register - set up local bus timing
@@ -34,8 +34,8 @@ void cpu_init_f(void)
 	out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8);
 
 #if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM)
-	out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM);
-	out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM);
+	set_lbc_br(0, CONFIG_NAND_BR_PRELIM);
+	set_lbc_or(0, CONFIG_NAND_OR_PRELIM);
 #else
 #error  CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined
 #endif

arch/powerpc/cpu/mpc85xx/speed.c

@@ -172,10 +172,7 @@ void get_sys_info (sys_info_t * sysInfo)
 	/* We will program LCRR to this value later */
 	lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
 #else
-	{
-	    volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-	    lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
-	}
+	lcrr_div = in_be32(&(LBC_BASE_ADDR)->lcrr) & LCRR_CLKDIV;
 #endif
 	if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
 #if defined(CONFIG_FSL_CORENET)

arch/powerpc/cpu/mpc86xx/cpu.c

@@ -180,22 +180,9 @@ watchdog_reset(void)
  */
 void mpc86xx_reginfo(void)
 {
-	immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	ccsr_lbc_t *lbc = &immap->im_lbc;
-
 	print_bats();
 	print_laws();
-
-	printf ("Local Bus Controller Registers\n"
-		"\tBR0\t0x%08X\tOR0\t0x%08X \n", in_be32(&lbc->br0), in_be32(&lbc->or0));
-	printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", in_be32(&lbc->br1), in_be32(&lbc->or1));
-	printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", in_be32(&lbc->br2), in_be32(&lbc->or2));
-	printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", in_be32(&lbc->br3), in_be32(&lbc->or3));
-	printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", in_be32(&lbc->br4), in_be32(&lbc->or4));
-	printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", in_be32(&lbc->br5), in_be32(&lbc->or5));
-	printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", in_be32(&lbc->br6), in_be32(&lbc->or6));
-	printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7));
-
+	print_lbc_regs();
 }
 
 /*

arch/powerpc/cpu/mpc86xx/cpu_init.c

@@ -46,9 +46,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void cpu_init_f(void)
 {
-	volatile immap_t    *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
-
 	/* Pointer is writable since we allocated a register for it */
 	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
@@ -61,58 +58,8 @@ void cpu_init_f(void)
 
 	setup_bats();
 
-	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
-	 * addresses - these have to be modified later when FLASH size
-	 * has been determined
-	 */
-
-#if defined(CONFIG_SYS_OR0_REMAP)
-	memctl->or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
-	memctl->or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-
-	/* now restrict to preliminary range */
-#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
-	memctl->br0 = CONFIG_SYS_BR0_PRELIM;
-	memctl->or0 = CONFIG_SYS_OR0_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
-	memctl->or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
-	memctl->or2 = CONFIG_SYS_OR2_PRELIM;
-	memctl->br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
+	init_early_memctl_regs();
 
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
-	memctl->or3 = CONFIG_SYS_OR3_PRELIM;
-	memctl->br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
-	memctl->or4 = CONFIG_SYS_OR4_PRELIM;
-	memctl->br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
-	memctl->or5 = CONFIG_SYS_OR5_PRELIM;
-	memctl->br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
-	memctl->or6 = CONFIG_SYS_OR6_PRELIM;
-	memctl->br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
-	memctl->or7 = CONFIG_SYS_OR7_PRELIM;
-	memctl->br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
 #if defined(CONFIG_FSL_DMA)
 	dma_init();
 #endif

arch/powerpc/cpu/mpc86xx/speed.c

@@ -97,10 +97,7 @@ void get_sys_info(sys_info_t *sysInfo)
 	/* We will program LCRR to this value later */
 	lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
 #else
-	{
-		volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-		lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
-	}
+	lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV;
 #endif
 	if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
 		sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2);

arch/powerpc/cpu/mpc8xxx/Makefile

@@ -16,6 +16,7 @@ COBJS-$(CONFIG_PCI)	+= pci_cfg.o
 endif
 
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))

arch/powerpc/cpu/mpc8xxx/fsl_lbc.c

@@ -0,0 +1,84 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_lbc.h>
+
+void print_lbc_regs(void)
+{
+	int i;
+
+	printf("\nLocal Bus Controller Registers\n");
+	for (i = 0; i < 8; i++) {
+		printf("BR%d\t0x%08X\tOR%d\t0x%08X\n",
+		       i, get_lbc_br(i), i, get_lbc_or(i));
+	}
+}
+
+void init_early_memctl_regs(void)
+{
+	uint init_br1 = 1;
+
+#ifdef CONFIG_MPC85xx
+	/* if cs1 is already set via debugger, leave cs0/cs1 alone */
+	if (get_lbc_br(1) & BR_V)
+		init_br1 = 0;
+#endif
+
+	/*
+	 * Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
+	 * preliminary addresses - these have to be modified later
+	 * when FLASH size has been determined
+	 */
+#if defined(CONFIG_SYS_OR0_REMAP)
+	set_lbc_or(0, CONFIG_SYS_OR0_REMAP);
+#endif
+#if defined(CONFIG_SYS_OR1_REMAP)
+	set_lbc_or(1, CONFIG_SYS_OR1_REMAP);
+#endif
+	/* now restrict to preliminary range */
+	if (init_br1) {
+		set_lbc_br(0, CONFIG_SYS_BR0_PRELIM);
+		set_lbc_or(0, CONFIG_SYS_OR0_PRELIM);
+
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+		set_lbc_or(1, CONFIG_SYS_OR1_PRELIM);
+		set_lbc_br(1, CONFIG_SYS_BR1_PRELIM);
+#endif
+	}
+
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+	set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
+	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+	set_lbc_or(4, CONFIG_SYS_OR4_PRELIM);
+	set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+	set_lbc_or(5, CONFIG_SYS_OR5_PRELIM);
+	set_lbc_br(5, CONFIG_SYS_BR5_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+	set_lbc_or(6, CONFIG_SYS_OR6_PRELIM);
+	set_lbc_br(6, CONFIG_SYS_BR6_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+	set_lbc_or(7, CONFIG_SYS_OR7_PRELIM);
+	set_lbc_br(7, CONFIG_SYS_BR7_PRELIM);
+#endif
+}

arch/powerpc/include/asm/config.h

@@ -85,4 +85,10 @@
 /* Relocation to SDRAM works on all PPC boards */
 #define CONFIG_RELOC_FIXUP_WORKS
 
+/* Since so many PPC SOCs have a semi-common LBC, define this here */
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
+	defined(CONFIG_MPC83xx)
+#define CONFIG_FSL_LBC
+#endif
+
 #endif /* _ASM_CONFIG_H_ */

arch/powerpc/include/asm/fsl_lbc.h

@@ -14,6 +14,7 @@
 #define __ASM_PPC_FSL_LBC_H
 
 #include <config.h>
+#include <common.h>
 
 /* BR - Base Registers
  */
@@ -453,49 +454,69 @@
 #define LTESR_CC               0x00000001
 
 #ifndef __ASSEMBLY__
-/*
- * Local Bus Controller Registers.
- */
-typedef struct lbus_bank {
-	u32 br;                 /* Base Register */
-	u32 or;                 /* Option Register */
-} lbus_bank_t;
-
-typedef struct fsl_lbus {
-	lbus_bank_t bank[8];
-	u8 res0[0x28];
-	u32 mar;                /* UPM Address Register */
-	u8 res1[0x4];
-	u32 mamr;               /* UPMA Mode Register */
-	u32 mbmr;               /* UPMB Mode Register */
-	u32 mcmr;               /* UPMC Mode Register */
-	u8 res2[0x8];
-	u32 mrtpr;              /* Memory Refresh Timer Prescaler Register */
-	u32 mdr;                /* UPM Data Register */
-	u8 res3[0x4];
-	u32 lsor;               /* Special Operation Initiation Register */
-	u32 lsdmr;              /* SDRAM Mode Register */
-	u8 res4[0x8];
-	u32 lurt;               /* UPM Refresh Timer */
-	u32 lsrt;               /* SDRAM Refresh Timer */
-	u8 res5[0x8];
-	u32 ltesr;              /* Transfer Error Status Register */
-	u32 ltedr;              /* Transfer Error Disable Register */
-	u32 lteir;              /* Transfer Error Interrupt Register */
-	u32 lteatr;             /* Transfer Error Attributes Register */
-	u32 ltear;               /* Transfer Error Address Register */
-	u8 res6[0xC];
-	u32 lbcr;               /* Configuration Register */
-	u32 lcrr;               /* Clock Ratio Register */
-	u8 res7[0x8];
-	u32 fmr;                /* Flash Mode Register */
-	u32 fir;                /* Flash Instruction Register */
-	u32 fcr;                /* Flash Command Register */
-	u32 fbar;               /* Flash Block Addr Register */
-	u32 fpar;               /* Flash Page Addr Register */
-	u32 fbcr;               /* Flash Byte Count Register */
-	u8 res8[0xF08];
-} fsl_lbus_t;
-#endif /* __ASSEMBLY__ */
+#include <asm/io.h>
+
+extern void print_lbc_regs(void);
+extern void init_early_memctl_regs(void);
+
+#define LBC_BASE_ADDR ((fsl_lbc_t *)CONFIG_SYS_LBC_ADDR)
+#define get_lbc_br(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].br))
+#define get_lbc_or(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].or))
+#define set_lbc_br(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].br, v))
+#define set_lbc_or(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].or, v))
+
+typedef struct lbc_bank {
+	u32     br;
+	u32     or;
+} lbc_bank_t;
 
+/* Local Bus Controller Registers */
+typedef struct fsl_lbc {
+	lbc_bank_t      bank[8];
+	u8	res1[40];
+	u32     mar;            /* LBC UPM Addr */
+	u8      res2[4];
+	u32     mamr;           /* LBC UPMA Mode */
+	u32     mbmr;           /* LBC UPMB Mode */
+	u32     mcmr;           /* LBC UPMC Mode */
+	u8      res3[8];
+	u32     mrtpr;          /* LBC Memory Refresh Timer Prescaler */
+	u32     mdr;            /* LBC UPM Data */
+#ifdef CONFIG_FSL_ELBC
+	u8      res4[4];
+	u32     lsor;
+	u8      res5[12];
+	u32     lurt;           /* LBC UPM Refresh Timer */
+	u8	res6[4];
+#else
+	u8	res4[8];
+	u32     lsdmr;          /* LBC SDRAM Mode */
+	u8	res5[8];
+	u32     lurt;           /* LBC UPM Refresh Timer */
+	u32     lsrt;           /* LBC SDRAM Refresh Timer */
+#endif
+	u8      res7[8];
+	u32     ltesr;          /* LBC Transfer Error Status */
+	u32     ltedr;          /* LBC Transfer Error Disable */
+	u32     lteir;          /* LBC Transfer Error IRQ */
+	u32     lteatr;         /* LBC Transfer Error Attrs */
+	u32     ltear;          /* LBC Transfer Error Addr */
+	u8      res8[12];
+	u32     lbcr;           /* LBC Configuration */
+	u32     lcrr;           /* LBC Clock Ratio */
+#ifdef CONFIG_NAND_FSL_ELBC
+	u8	res9[0x8];
+	u32     fmr;            /* Flash Mode Register */
+	u32     fir;            /* Flash Instruction Register */
+	u32     fcr;            /* Flash Command Register */
+	u32     fbar;           /* Flash Block Addr Register */
+	u32     fpar;           /* Flash Page Addr Register */
+	u32     fbcr;           /* Flash Byte Count Register */
+	u8      res10[0xF08];
+#else
+	u8      res9[0xF28];
+#endif
+} fsl_lbc_t;
+
+#endif /* __ASSEMBLY__ */
 #endif /* __ASM_PPC_FSL_LBC_H */

arch/powerpc/include/asm/immap_83xx.h

@@ -646,7 +646,7 @@ typedef struct immap {
 	u8			res2[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res3[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res4[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -686,7 +686,7 @@ typedef struct immap {
 	u8			res1[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res3[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -721,7 +721,7 @@ typedef struct immap {
 	u8			res1[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res3[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -766,7 +766,7 @@ typedef struct immap {
 	u8			res1[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res3[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -816,7 +816,7 @@ typedef struct immap {
 	u8			res4[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res5[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res6[0x2000];
 	dma83xx_t		dma;		/* DMA */
 	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
@@ -855,7 +855,7 @@ typedef struct immap {
 	u8			res3[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res4[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res5[0x2000];
 	dma83xx_t		dma;		/* DMA */
 	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
@@ -879,6 +879,7 @@ typedef struct immap {
 #endif
 #define CONFIG_SYS_MPC83xx_USB_ADDR \
 			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET)
+#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)
 
 #define CONFIG_SYS_TSEC1_OFFSET		0x24000
 #define CONFIG_SYS_MDIO1_OFFSET		0x24000

arch/powerpc/include/asm/immap_85xx.h

@@ -266,50 +266,6 @@ typedef struct ccsr_duart {
 } ccsr_duart_t;
 #endif
 
-/* Local Bus Controller Registers */
-typedef struct ccsr_lbc {
-	u32	br0;		/* LBC Base 0 */
-	u32	or0;		/* LBC Options 0 */
-	u32	br1;		/* LBC Base 1 */
-	u32	or1;		/* LBC Options 1 */
-	u32	br2;		/* LBC Base 2 */
-	u32	or2;		/* LBC Options 2 */
-	u32	br3;		/* LBC Base 3 */
-	u32	or3;		/* LBC Options 3 */
-	u32	br4;		/* LBC Base 4 */
-	u32	or4;		/* LBC Options 4 */
-	u32	br5;		/* LBC Base 5 */
-	u32	or5;		/* LBC Options 5 */
-	u32	br6;		/* LBC Base 6 */
-	u32	or6;		/* LBC Options 6 */
-	u32	br7;		/* LBC Base 7 */
-	u32	or7;		/* LBC Options 7 */
-	u8	res1[40];
-	u32	mar;		/* LBC UPM Addr */
-	u8	res2[4];
-	u32	mamr;		/* LBC UPMA Mode */
-	u32	mbmr;		/* LBC UPMB Mode */
-	u32	mcmr;		/* LBC UPMC Mode */
-	u8	res3[8];
-	u32	mrtpr;		/* LBC Memory Refresh Timer Prescaler */
-	u32	mdr;		/* LBC UPM Data */
-	u8	res4[8];
-	u32	lsdmr;		/* LBC SDRAM Mode */
-	u8	res5[8];
-	u32	lurt;		/* LBC UPM Refresh Timer */
-	u32	lsrt;		/* LBC SDRAM Refresh Timer */
-	u8	res6[8];
-	u32	ltesr;		/* LBC Transfer Error Status */
-	u32	ltedr;		/* LBC Transfer Error Disable */
-	u32	lteir;		/* LBC Transfer Error IRQ */
-	u32	lteatr;		/* LBC Transfer Error Attrs */
-	u32	ltear;		/* LBC Transfer Error Addr */
-	u8	res7[12];
-	u32	lbcr;		/* LBC Configuration */
-	u32	lcrr;		/* LBC Clock Ratio */
-	u8	res8[3880];
-} ccsr_lbc_t;
-
 /* eSPI Registers */
 typedef struct ccsr_espi {
 	u32	mode;		/* eSPI mode */
@@ -2147,7 +2103,7 @@ typedef struct ccsr_sec {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
 #define CONFIG_SYS_MPC85xx_DDR2_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
-#define CONFIG_SYS_MPC85xx_LBC_ADDR \
+#define CONFIG_SYS_LBC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
 #define CONFIG_SYS_MPC85xx_ESPI_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET)

arch/powerpc/include/asm/immap_86xx.h

@@ -12,6 +12,7 @@
 
 #include <asm/types.h>
 #include <asm/fsl_dma.h>
+#include <asm/fsl_lbc.h>
 #include <asm/fsl_i2c.h>
 
 /* Local-Access Registers and MCM Registers(0x0000-0x2000) */
@@ -190,51 +191,6 @@ typedef struct ccsr_duart {
 	char	res5[2543];
 } ccsr_duart_t;
 
-
-/* Local Bus Controller Registers(0x5000-0x6000) */
-typedef struct ccsr_lbc {
-	uint	br0;		/* 0x5000 - LBC Base Register 0 */
-	uint	or0;		/* 0x5004 - LBC Options Register 0 */
-	uint	br1;		/* 0x5008 - LBC Base Register 1 */
-	uint	or1;		/* 0x500c - LBC Options Register 1 */
-	uint	br2;		/* 0x5010 - LBC Base Register 2 */
-	uint	or2;		/* 0x5014 - LBC Options Register 2 */
-	uint	br3;		/* 0x5018 - LBC Base Register 3 */
-	uint	or3;		/* 0x501c - LBC Options Register 3 */
-	uint	br4;		/* 0x5020 - LBC Base Register 4 */
-	uint	or4;		/* 0x5024 - LBC Options Register 4 */
-	uint	br5;		/* 0x5028 - LBC Base Register 5 */
-	uint	or5;		/* 0x502c - LBC Options Register 5 */
-	uint	br6;		/* 0x5030 - LBC Base Register 6 */
-	uint	or6;		/* 0x5034 - LBC Options Register 6 */
-	uint	br7;		/* 0x5038 - LBC Base Register 7 */
-	uint	or7;		/* 0x503c - LBC Options Register 7 */
-	char	res1[40];
-	uint	mar;		/* 0x5068 - LBC UPM Address Register */
-	char	res2[4];
-	uint	mamr;		/* 0x5070 - LBC UPMA Mode Register */
-	uint	mbmr;		/* 0x5074 - LBC UPMB Mode Register */
-	uint	mcmr;		/* 0x5078 - LBC UPMC Mode Register */
-	char	res3[8];
-	uint	mrtpr;		/* 0x5084 - LBC Memory Refresh Timer Prescaler Register */
-	uint	mdr;		/* 0x5088 - LBC UPM Data Register */
-	char	res4[8];
-	uint	lsdmr;		/* 0x5094 - LBC SDRAM Mode Register */
-	char	res5[8];
-	uint	lurt;		/* 0x50a0 - LBC UPM Refresh Timer */
-	uint	lsrt;		/* 0x50a4 - LBC SDRAM Refresh Timer */
-	char	res6[8];
-	uint	ltesr;		/* 0x50b0 - LBC Transfer Error Status Register */
-	uint	ltedr;		/* 0x50b4 - LBC Transfer Error Disable Register */
-	uint	lteir;		/* 0x50b8 - LBC Transfer Error Interrupt Register */
-	uint	lteatr;		/* 0x50bc - LBC Transfer Error Attributes Register */
-	uint	ltear;		/* 0x50c0 - LBC Transfer Error Address Register */
-	char	res7[12];
-	uint	lbcr;		/* 0x50d0 - LBC Configuration Register */
-	uint	lcrr;		/* 0x50d4 - LBC Clock Ratio Register */
-	char	res8[3880];
-} ccsr_lbc_t;
-
 /* PCI Express Registers(0x8000-0x9000) and (0x9000-0xA000) */
 typedef struct ccsr_pex {
 	uint	cfg_addr;	/* 0x8000 - PEX Configuration Address Register */
@@ -1270,7 +1226,7 @@ typedef struct immap {
 	ccsr_ddr_t		im_ddr1;
 	ccsr_i2c_t		im_i2c;
 	ccsr_duart_t		im_duart;
-	ccsr_lbc_t		im_lbc;
+	fsl_lbc_t		im_lbc;
 	ccsr_ddr_t		im_ddr2;
 	char                    res1[4096];
 	ccsr_pex_t		im_pex1;
@@ -1303,6 +1259,7 @@ extern immap_t  *immr;
 
 #define CONFIG_SYS_TSEC1_OFFSET		0x24000
 #define CONFIG_SYS_MDIO1_OFFSET		0x24000
+#define CONFIG_SYS_LBC_ADDR		(&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)
 
 #define TSEC_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 #define MDIO_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)

board/atum8548/atum8548.c

@@ -47,7 +47,7 @@ int board_early_init_f (void)
 int checkboard (void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 
 	if ((uint)&gur->porpllsr != 0xe00e0000) {

board/esd/vme8349/vme8349.c

@@ -105,7 +105,7 @@ int misc_init_r()
 {
 	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 
-	clrsetbits_be32(&im->lbus.lcrr, LBCR_LDIS, 0);
+	clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0);
 
 	return 0;
 }

board/freescale/mpc8313erdb/sdram.c

@@ -110,7 +110,7 @@ static long fixed_sdram(void)
 phys_size_t initdram(int board_type)
 {
 	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbc = &im->lbus;
+	volatile fsl_lbc_t *lbc = &im->im_lbc;
 	u32 msize;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)

board/freescale/mpc8349emds/mpc8349emds.c

@@ -192,7 +192,7 @@ int checkboard (void)
 void sdram_init(void)
 {
 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbc = &immap->lbus;
+	volatile fsl_lbc_t *lbc = &immap->im_lbc;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	/*

board/freescale/mpc8349itx/mpc8349itx.c

@@ -221,15 +221,14 @@ int misc_init_f(void)
 		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01
 	};
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbus = &immap->lbus;
 
-	lbus->bank[3].br = CONFIG_SYS_BR3_PRELIM;
-	lbus->bank[3].or = CONFIG_SYS_OR3_PRELIM;
+	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
+	set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
 
 	/* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000,
 	   GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000
 	 */
-	lbus->mamr = 0x08404440;
+	immap->im_lbc.mamr = 0x08404440;
 
 	upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0]));
 

board/freescale/mpc8360emds/mpc8360emds.c

@@ -280,7 +280,7 @@ int checkboard(void)
 static int sdram_init(unsigned int base)
 {
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbc = &immap->lbus;
+	fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024;
 	int rem = base % sdram_size;
 	uint *sdram_addr;
@@ -293,8 +293,8 @@ static int sdram_init(unsigned int base)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	immap->lbus.bank[2].br = base | CONFIG_SYS_BR2;
-	immap->lbus.bank[2].or = CONFIG_SYS_OR2;
+	set_lbc_br(2, base | CONFIG_SYS_BR2);
+	set_lbc_or(2, CONFIG_SYS_OR2);
 	immap->sysconf.lblaw[2].bar = base;
 	immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2;
 

board/freescale/mpc8360erdk/nand.c

@@ -82,9 +82,9 @@ static struct fsl_upm_nand fun = {
 
 int board_nand_init(struct nand_chip *nand)
 {
-	fun.upm.mxmr = &im->lbus.mamr;
-	fun.upm.mdr = &im->lbus.mdr;
-	fun.upm.mar = &im->lbus.mar;
+	fun.upm.mxmr = &im->im_lbc.mamr;
+	fun.upm.mdr = &im->im_lbc.mdr;
+	fun.upm.mar = &im->im_lbc.mar;
 
 	upm_setup(&fun.upm);
 

board/freescale/mpc8540ads/mpc8540ads.c

@@ -117,7 +117,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -176,7 +176,7 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	puts("    SDRAM: ");
@@ -185,8 +185,8 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 

board/freescale/mpc8541cds/mpc8541cds.c

@@ -291,7 +291,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -340,7 +340,7 @@ sdram_init(void)
 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
@@ -352,16 +352,11 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
-	asm("msync");
-
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
-
 	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");

board/freescale/mpc8544ds/mpc8544ds.c

@@ -40,7 +40,7 @@
 int checkboard (void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 	u8 vboot;
 	u8 *pixis_base = (u8 *)PIXIS_BASE;

board/freescale/mpc8548cds/mpc8548cds.c

@@ -118,7 +118,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -154,7 +154,7 @@ sdram_init(void)
 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
@@ -166,16 +166,11 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
-	asm("msync");
-
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
-
 	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");

board/freescale/mpc8555cds/mpc8555cds.c

@@ -291,7 +291,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -340,7 +340,7 @@ sdram_init(void)
 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
@@ -352,12 +352,8 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
-	asm("msync");
-
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 

board/freescale/mpc8560ads/mpc8560ads.c

@@ -322,7 +322,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -381,7 +381,7 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	puts("    SDRAM: ");
@@ -390,8 +390,8 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 

board/freescale/mpc8568mds/mpc8568mds.c

@@ -181,7 +181,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -214,7 +214,7 @@ sdram_init(void)
 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint lsdmr_common;
 
@@ -225,16 +225,13 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	asm("msync");
 
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
-
 	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");

board/freescale/mpc8569mds/mpc8569mds.c

@@ -308,7 +308,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;

board/mpc8540eval/mpc8540eval.c

@@ -69,7 +69,7 @@ phys_size_t initdram (int board_type)
 	long dram_size = 0;
 
 #if !defined(CONFIG_RAM_AS_FLASH)
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	sys_info_t sysinfo;
 	uint temp_lbcdll = 0;
 #endif
@@ -110,8 +110,8 @@ phys_size_t initdram (int board_type)
 		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
 		asm("sync;isync;msync");
 	}
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
 	asm("sync");

board/pm854/pm854.c

@@ -134,7 +134,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;

board/pm856/pm856.c

@@ -290,7 +290,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;

board/sbc8349/sbc8349.c

@@ -160,7 +160,7 @@ int checkboard (void)
 void sdram_init(void)
 {
 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbc = &immap->lbus;
+	volatile fsl_lbc_t *lbc = &immap->im_lbc;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	puts("\n   SDRAM on Local Bus: ");

board/sbc8548/sbc8548.c

@@ -116,7 +116,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -152,7 +152,7 @@ sdram_init(void)
 #if defined(CONFIG_SYS_LBC_SDRAM_SIZE)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint lsdmr_common;
 
@@ -163,22 +163,14 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM);
-	asm("msync");
-
-	out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM);
-	asm("msync");
-
-	out_be32(&lbc->or4, CONFIG_SYS_OR4_PRELIM);
-	asm("msync");
-
-	out_be32(&lbc->br4, CONFIG_SYS_BR4_PRELIM);
-	asm("msync");
+	set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
+	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
+	set_lbc_or(4, CONFIG_SYS_OR4_PRELIM);
+	set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);
 
 	out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
 	asm("msync");
 
-
 	out_be32(&lbc->lsrt,  CONFIG_SYS_LBC_LSRT);
 	out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
 	asm("msync");

board/sbc8560/sbc8560.c

@@ -269,7 +269,7 @@ phys_size_t initdram (int board_type)
 
 #if 0
 #if !defined(CONFIG_RAM_AS_FLASH)
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	sys_info_t sysinfo;
 	uint temp_lbcdll = 0;
 #endif
@@ -310,8 +310,8 @@ phys_size_t initdram (int board_type)
 		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
 		asm("sync;isync;msync");
 	}
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
 	asm("sync");

board/sheldon/simpc8313/sdram.c

@@ -129,7 +129,7 @@ void si_read_i2c(u32 lbyte, int count, u8 *buffer)
 phys_size_t initdram(int board_type)
 {
 	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbc= &im->lbus;
+	volatile fsl_lbc_t *lbc = &im->im_lbc;
 	u32 msize;
 
 	if ((__raw_readl(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32) im)

board/sheldon/simpc8313/simpc8313.c

@@ -93,7 +93,7 @@ int misc_init_r(void)
 {
 	int rc = 0;
 	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	fsl_lbus_t *lbus = &immap->lbus;
+	fsl_lbc_t *lbus = &immap->im_lbc;
 	u32 *mxmr = &lbus->mamr;	/* Pointer to mamr */
 
 	/* UPM Table Configuration Code */

board/socrates/socrates.c

@@ -87,8 +87,6 @@ int checkboard (void)
 
 int misc_init_r (void)
 {
-	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-
 	/*
 	 * Adjust flash start and offset to detected values
 	 */
@@ -99,8 +97,10 @@ int misc_init_r (void)
 	 * Check if boot FLASH isn't max size
 	 */
 	if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH0)) {
-		memctl->or0 = gd->bd->bi_flashstart | (CONFIG_SYS_OR0_PRELIM & 0x00007fff);
-		memctl->br0 = gd->bd->bi_flashstart | (CONFIG_SYS_BR0_PRELIM & 0x00007fff);
+		set_lbc_or(0, gd->bd->bi_flashstart |
+			   (CONFIG_SYS_OR0_PRELIM & 0x00007fff));
+		set_lbc_br(0, gd->bd->bi_flashstart |
+			   (CONFIG_SYS_BR0_PRELIM & 0x00007fff));
 
 		/*
 		 * Re-check to get correct base address
@@ -112,8 +112,8 @@ int misc_init_r (void)
 	 * Check if only one FLASH bank is available
 	 */
 	if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) {
-		memctl->or1 = 0;
-		memctl->br1 = 0;
+		set_lbc_or(1, 0);
+		set_lbc_br(1, 0);
 
 		/*
 		 * Re-do flash protection upon new addresses
@@ -148,7 +148,7 @@ int misc_init_r (void)
  */
 void local_bus_init (void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 	sys_info_t sysinfo;
 	uint clkdiv;
@@ -299,26 +299,25 @@ const gdc_regs *board_get_regs (void)
 
 int lime_probe(void)
 {
-	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	uint cfg_br2;
 	uint cfg_or2;
 	int type;
 
-	cfg_br2 = memctl->br2;
-	cfg_or2 = memctl->or2;
+	cfg_br2 = get_lbc_br(2);
+	cfg_or2 = get_lbc_or(2);
 
 	/* Configure GPCM for CS2 */
-	memctl->br2 = 0;
-	memctl->or2 = 0xfc000410;
-	memctl->br2 = (CONFIG_SYS_LIME_BASE) | 0x00001901;
+	set_lbc_br(2, 0);
+	set_lbc_or(2, 0xfc000410);
+	set_lbc_br(2, (CONFIG_SYS_LIME_BASE) | 0x00001901);
 
 	/* Get controller type */
 	type = mb862xx_probe(CONFIG_SYS_LIME_BASE);
 
 	/* Restore previous CS2 configuration */
-	memctl->br2 = 0;
-	memctl->or2 = cfg_or2;
-	memctl->br2 = cfg_br2;
+	set_lbc_br(2, 0);
+	set_lbc_or(2, cfg_or2);
+	set_lbc_br(2, cfg_br2);
 
 	return (type == MB862XX_TYPE_LIME) ? 1 : 0;
 }

board/tqc/tqm834x/tqm834x.c

@@ -253,10 +253,10 @@ static int detect_num_flash_banks(void)
 	debug("Number of flash banks detected: %d\n", tqm834x_num_flash_banks);
 
 	/* set OR0 and BR0 */
-	im->lbus.bank[0].or = CONFIG_SYS_OR_TIMING_FLASH |
-		(-(total_size) & OR_GPCM_AM);
-	im->lbus.bank[0].br = (CONFIG_SYS_FLASH_BASE & BR_BA) |
-		(BR_MS_GPCM | BR_PS_32 | BR_V);
+	set_lbc_or(0, CONFIG_SYS_OR_TIMING_FLASH |
+		   (-(total_size) & OR_GPCM_AM));
+	set_lbc_br(0, (CONFIG_SYS_FLASH_BASE & BR_BA) |
+		   (BR_MS_GPCM | BR_PS_32 | BR_V));
 
 	return (0);
 }

board/tqc/tqm85xx/nand.c

@@ -377,7 +377,7 @@ volatile const u32 *nand_upm_patt;
  */
 static void upmb_write (u_char addr, ulong val)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	out_be32 (&lbc->mdr, val);
 
@@ -393,14 +393,14 @@ static void upmb_write (u_char addr, ulong val)
 /*
  * Initialize UPM for NAND flash access.
  */
-static void nand_upm_setup (volatile ccsr_lbc_t *lbc)
+static void nand_upm_setup (volatile fsl_lbc_t *lbc)
 {
 	uint i, j;
 	uint or3 = CONFIG_SYS_OR3_PRELIM;
 	uint clock = get_lbc_clock ();
 
-	out_be32 (&lbc->br3, 0);	/* disable bank and reset all bits */
-	out_be32 (&lbc->br3, CONFIG_SYS_BR3_PRELIM);
+	set_lbc_br(3, 0);	/* disable bank and reset all bits */
+	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
 
 	/*
 	 * Search appropriate UPM table for bus clock.
@@ -424,7 +424,7 @@ static void nand_upm_setup (volatile ccsr_lbc_t *lbc)
 		/* EAD must be set due to TQM8548 timing specification */
 		or3 |= OR_UPM_EAD;
 
-	out_be32 (&lbc->or3, or3);
+	set_lbc_or(3, or3);
 
 	/* Assign address of table */
 	nand_upm_patt = upm_freq_table[i].upm_patt;
@@ -458,7 +458,7 @@ void board_nand_select_device (struct nand_chip *nand, int chip)
 
 int board_nand_init (struct nand_chip *nand)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	if (!nand_upm_patt)
 		nand_upm_setup (lbc);

board/tqc/tqm85xx/tqm85xx.c

@@ -269,8 +269,6 @@ int checkboard (void)
 
 int misc_init_r (void)
 {
-	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-
 	/*
 	 * Adjust flash start and offset to detected values
 	 */
@@ -281,26 +279,27 @@ int misc_init_r (void)
 	 * Recalculate CS configuration if second FLASH bank is available
 	 */
 	if (flash_info[0].size > 0) {
-		memctl->or1 = ((-flash_info[0].size) & 0xffff8000) |
-			(CONFIG_SYS_OR1_PRELIM & 0x00007fff);
-		memctl->br1 = gd->bd->bi_flashstart |
-			(CONFIG_SYS_BR1_PRELIM & 0x00007fff);
+		set_lbc_or(1, ((-flash_info[0].size) & 0xffff8000) |
+			   (CONFIG_SYS_OR1_PRELIM & 0x00007fff));
+		set_lbc_br(1, gd->bd->bi_flashstart |
+			   (CONFIG_SYS_BR1_PRELIM & 0x00007fff));
 		/*
 		 * Re-check to get correct base address for bank 1
 		 */
 		flash_get_size (gd->bd->bi_flashstart, 0);
 	} else {
-		memctl->or1 = 0;
-		memctl->br1 = 0;
+		set_lbc_or(1, 0);
+		set_lbc_br(1, 0);
 	}
 
 	/*
 	 *  If bank 1 is equipped, bank 0 is mapped after bank 1
 	 */
-	memctl->or0 = ((-flash_info[1].size) & 0xffff8000) |
-		(CONFIG_SYS_OR0_PRELIM & 0x00007fff);
-	memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) |
-		(CONFIG_SYS_BR0_PRELIM & 0x00007fff);
+	set_lbc_or(0, ((-flash_info[1].size) & 0xffff8000) |
+		   (CONFIG_SYS_OR0_PRELIM & 0x00007fff));
+	set_lbc_br(0, gd->bd->bi_flashstart |
+		   (CONFIG_SYS_BR0_PRELIM & 0x00007fff));
+
 	/*
 	 * Re-check to get correct base address for bank 0
 	 */
@@ -341,7 +340,7 @@ int misc_init_r (void)
  */
 static void upmc_write (u_char addr, uint val)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	out_be32 (&lbc->mdr, val);
 
@@ -358,7 +357,7 @@ static void upmc_write (u_char addr, uint val)
 
 uint get_lbc_clock (void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	sys_info_t sys_info;
 	ulong clkdiv = lbc->lcrr & LCRR_CLKDIV;
 
@@ -386,7 +385,7 @@ uint get_lbc_clock (void)
 void local_bus_init (void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint lbc_mhz = get_lbc_clock ()  / 1000000;
 
 #ifdef CONFIG_MPC8548
@@ -502,10 +501,10 @@ void local_bus_init (void)
 	 * set if Local Bus Clock is > 83 MHz.
 	 */
 	if (lbc_mhz > 83)
-		out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD);
+		set_lbc_or(2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD);
 	else
-		out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN);
-	out_be32 (&lbc->br2, CONFIG_SYS_BR2_CAN);
+		set_lbc_or(2, CONFIG_SYS_OR2_CAN);
+	set_lbc_br(2, CONFIG_SYS_BR2_CAN);
 
 	/* LGPL4 is UPWAIT */
 	out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X);

board/xes/xpedite5170/xpedite5170.c

@@ -56,8 +56,6 @@ int checkboard(void)
  */
 static void flash_cs_fixup(void)
 {
-	immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	ccsr_lbc_t *lbc = &immap->im_lbc;
 	int flash_sel;
 
 	/*
@@ -70,11 +68,11 @@ static void flash_cs_fixup(void)
 	printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
 
 	if (flash_sel) {
-		out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM);
-		out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM);
+		set_lbc_br(0, CONFIG_SYS_BR1_PRELIM);
+		set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);
 
-		out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM);
-		out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM);
+		set_lbc_br(1, CONFIG_SYS_BR0_PRELIM);
+		set_lbc_or(1, CONFIG_SYS_OR0_PRELIM);
 	}
 }
 

board/xes/xpedite5200/xpedite5200.c

@@ -38,7 +38,7 @@ extern void ft_board_pci_setup(void *blob, bd_t *bd);
 
 int checkboard(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 	char *s;
 
@@ -65,7 +65,6 @@ int checkboard(void)
 
 static void flash_cs_fixup(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	int flash_sel;
 
 	/*
@@ -78,11 +77,11 @@ static void flash_cs_fixup(void)
 	printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
 
 	if (flash_sel) {
-		out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM);
-		out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM);
+		set_lbc_br(0, CONFIG_SYS_BR1_PRELIM);
+		set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);
 
-		out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM);
-		out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM);
+		set_lbc_br(1, CONFIG_SYS_BR0_PRELIM);
+		set_lbc_or(1, CONFIG_SYS_OR0_PRELIM);
 	}
 }
 

board/xes/xpedite5370/xpedite5370.c

@@ -58,7 +58,6 @@ int checkboard(void)
 
 static void flash_cs_fixup(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	int flash_sel;
 
 	/*
@@ -71,11 +70,11 @@ static void flash_cs_fixup(void)
 	printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
 
 	if (flash_sel) {
-		out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM);
-		out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM);
+		set_lbc_br(0, CONFIG_SYS_BR1_PRELIM);
+		set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);
 
-		out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM);
-		out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM);
+		set_lbc_br(1, CONFIG_SYS_BR0_PRELIM);
+		set_lbc_or(1, CONFIG_SYS_OR0_PRELIM);
 	}
 }
 

drivers/mtd/nand/fsl_elbc_nand.c

@@ -75,7 +75,7 @@ struct fsl_elbc_ctrl {
 	struct fsl_elbc_mtd *chips[MAX_BANKS];
 
 	/* device info */
-	fsl_lbus_t *regs;
+	fsl_lbc_t *regs;
 	u8 __iomem *addr;        /* Address of assigned FCM buffer        */
 	unsigned int page;       /* Last page written to / read from      */
 	unsigned int read_bytes; /* Number of bytes read during command   */
@@ -171,7 +171,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	fsl_lbus_t *lbc = ctrl->regs;
+	fsl_lbc_t *lbc = ctrl->regs;
 	int buf_num;
 
 	ctrl->page = page_addr;
@@ -211,7 +211,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	fsl_lbus_t *lbc = ctrl->regs;
+	fsl_lbc_t *lbc = ctrl->regs;
 	long long end_tick;
 	u32 ltesr;
 
@@ -261,7 +261,7 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	fsl_lbus_t *lbc = ctrl->regs;
+	fsl_lbc_t *lbc = ctrl->regs;
 
 	if (priv->page_size) {
 		out_be32(&lbc->fir,
@@ -295,7 +295,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	fsl_lbus_t *lbc = ctrl->regs;
+	fsl_lbc_t *lbc = ctrl->regs;
 
 	ctrl->use_mdr = 0;
 
@@ -633,7 +633,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	fsl_lbus_t *lbc = ctrl->regs;
+	fsl_lbc_t *lbc = ctrl->regs;
 
 	if (ctrl->status != LTESR_CC)
 		return NAND_STATUS_FAIL;
@@ -697,11 +697,7 @@ static void fsl_elbc_ctrl_init(void)
 	if (!elbc_ctrl)
 		return;
 
-#ifdef CONFIG_MPC85xx
-	elbc_ctrl->regs = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR;
-#else
-	elbc_ctrl->regs = &((immap_t *)CONFIG_SYS_IMMR)->lbus;
-#endif
+	elbc_ctrl->regs = LBC_BASE_ADDR;
 
 	/* clear event registers */
 	out_be32(&elbc_ctrl->regs->ltesr, LTESR_NAND_MASK);

include/mpc85xx.h

@@ -6,8 +6,6 @@
 #ifndef	__MPC85xx_H__
 #define __MPC85xx_H__
 
-#include <asm/fsl_lbc.h>
-
 /* define for common ppc_asm.tmpl */
 #define EXC_OFF_SYS_RESET	0x100	/* System reset */
 #define _START_OFFSET		0

nand_spl/board/freescale/mpc8536ds/nand_boot.c

@@ -34,12 +34,11 @@ void board_init_f(ulong bootflag)
 	int px_spd;
 	u32 plat_ratio, bus_clk, sys_clk;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-	ccsr_lbc_t *lbc = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR;
 
 #if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
 	/* for FPGA */
-	out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM);
-	out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM);
+	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
+	set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
 #else
 #error CONFIG_SYS_BR3_PRELIM, CONFIG_SYS_OR3_PRELIM must be defined
 #endif

nand_spl/nand_boot_fsl_elbc.c

@@ -32,7 +32,7 @@
 
 static void nand_wait(void)
 {
-	fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000);
+	fsl_lbc_t *regs = LBC_BASE_ADDR;
 
 	for (;;) {
 		uint32_t status = in_be32(&regs->ltesr);
@@ -49,7 +49,7 @@ static void nand_wait(void)
 
 static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
 {
-	fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000);
+	fsl_lbc_t *regs = LBC_BASE_ADDR;
 	uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
 	int large = in_be32(&regs->bank[0].or) & OR_FCM_PGS;
 	int block_shift = large ? 17 : 14;