at91sam9/at91cap: move common usb host initialisation to cpu

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

board/atmel/at91sam9263ek/at91sam9263ek.c

@@ -154,15 +154,6 @@ static void at91sam9263ek_macb_hw_init(void)
 }
 #endif
 
-#ifdef CONFIG_USB_OHCI_NEW
-static void at91sam9263ek_uhp_hw_init(void)
-{
-	/* Enable VBus on UHP ports */
-	at91_set_gpio_output(AT91_PIN_PA21, 0);
-	at91_set_gpio_output(AT91_PIN_PA24, 0);
-}
-#endif
-
 #ifdef CONFIG_LCD
 vidinfo_t panel_info = {
 	vl_col:		240,
@@ -273,7 +264,7 @@ int board_init(void)
 	at91sam9263ek_macb_hw_init();
 #endif
 #ifdef CONFIG_USB_OHCI_NEW
-	at91sam9263ek_uhp_hw_init();
+	at91_uhp_hw_init();
 #endif
 #ifdef CONFIG_LCD
 	at91sam9263ek_lcd_hw_init();

cpu/arm926ejs/at91/Makefile

@@ -40,6 +40,7 @@ endif
 ifdef CONFIG_AT91SAM9263
 COBJS-y				+= at91sam9263_serial.o
 COBJS-$(CONFIG_HAS_DATAFLASH)	+= at91sam9263_spi.o
+COBJS-$(CONFIG_USB_OHCI_NEW)	+= at91sam9263_usb.o
 endif
 ifdef CONFIG_AT91SAM9RL
 COBJS-y				+= at91sam9rl_serial.o

cpu/arm926ejs/at91/at91sam9263_usb.c

@@ -0,0 +1,35 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_uhp_hw_init(void)
+{
+	/* Enable VBus on UHP ports */
+	at91_set_gpio_output(AT91_PIN_PA21, 0);
+	at91_set_gpio_output(AT91_PIN_PA24, 0);
+}

include/asm-arm/arch-at91/at91_common.h

@@ -32,5 +32,6 @@ void at91_serial2_hw_init(void);
 void at91_serial3_hw_init(void);
 void at91_spi0_hw_init(unsigned long cs_mask);
 void at91_spi1_hw_init(unsigned long cs_mask);
+void at91_uhp_hw_init(void);
 
 #endif /* AT91_COMMON_H */