Blackfin: unify bootmode based LDR_FLAGS setup

Unify this convention for all Blackfin boards.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

arch/blackfin/config.mk

@@ -67,6 +67,9 @@ endif
 
 LDR_FLAGS += $(LDR_FLAGS-y)
 
+# Set some default LDR flags based on boot mode.
+LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+
 ifeq ($(wildcard $(TOPDIR)/board/$(BOARD)/u-boot.lds*),)
 LDSCRIPT = $(obj)arch/$(ARCH)/lib/u-boot.lds.S
 endif

board/bct-brettl2/config.mk

@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf536-0.3
 
 CFLAGS_lib += -O2
 CFLAGS_lib/lzma += -O2
-
-# Set some default LDR flags based on boot mode.
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf518f-ezbrd/config.mk

@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf518-0.0
 
 CFLAGS_lib += -O2
 CFLAGS_lib/lzma += -O2
-
-# Set some default LDR flags based on boot mode.
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf526-ezbrd/config.mk

@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf526-0.0
 
 CFLAGS_lib += -O2
 CFLAGS_lib/lzma += -O2
-
-# Set some default LDR flags based on boot mode.
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf527-ad7160-eval/config.mk

@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf527-0.2
 
 CFLAGS_lib += -O2
 CFLAGS_lib/lzma += -O2
-
-# Set some default LDR flags based on boot mode.
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf527-ezkit/config.mk

@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf527-0.0
 
 CFLAGS_lib += -O2
 CFLAGS_lib/lzma += -O2
-
-# Set some default LDR flags based on boot mode.
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf527-sdp/config.mk

@@ -30,4 +30,3 @@ CFLAGS_lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 6
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf533-ezkit/config.mk

@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf533-stamp/config.mk

@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf537-minotaur/config.mk

@@ -26,5 +26,4 @@
 CONFIG_BFIN_CPU = bf537-0.2
 
 # Set some default LDR flags based on boot mode.
-LDR_FLAGS-BFIN_BOOT_UART       := --port g --gpio 6
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6

board/bf537-pnav/config.mk

@@ -24,6 +24,3 @@
 #
 
 CONFIG_BFIN_CPU = bf537-0.2
-
-# Set some default LDR flags based on boot mode.
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf537-srv1/config.mk

@@ -26,5 +26,4 @@
 CONFIG_BFIN_CPU = bf537-0.2
 
 # Set some default LDR flags based on boot mode.
-LDR_FLAGS-BFIN_BOOT_UART       := --port g --gpio 6
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6

board/bf537-stamp/config.mk

@@ -31,4 +31,3 @@ CFLAGS_lib/lzma += -O2
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf538f-ezkit/config.mk

@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf548-ezkit/config.mk

@@ -34,4 +34,3 @@ LDR_FLAGS-BFIN_BOOT_FIFO       := --dma 1
 LDR_FLAGS-BFIN_BOOT_SPI_MASTER := --dma 1
 LDR_FLAGS-BFIN_BOOT_UART       := --dma 1
 LDR_FLAGS-BFIN_BOOT_NAND       := --dma 6
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf561-acvilon/config.mk

@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf561-ezkit/config.mk

@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/blackstamp/config.mk

@@ -24,6 +24,3 @@
 #
 
 CONFIG_BFIN_CPU = bf532-0.5
-
-# Set some default LDR flags based on boot mode.
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/blackvme/config.mk

@@ -24,6 +24,3 @@
 #
 
 CONFIG_BFIN_CPU = bf561-0.5
-
-# Set some default LDR flags based on boot mode.
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/cm-bf527/config.mk

@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf527-0.0
 
 CFLAGS_lib += -O2
 CFLAGS_lib/lzma += -O2
-
-# Set some default LDR flags based on boot mode.
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/cm-bf533/config.mk

@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/cm-bf537e/config.mk

@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/cm-bf537u/config.mk

@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/cm-bf548/config.mk

@@ -33,4 +33,3 @@ LDR_FLAGS-BFIN_BOOT_PARA       := --dma 6
 LDR_FLAGS-BFIN_BOOT_FIFO       := --dma 1
 LDR_FLAGS-BFIN_BOOT_SPI_MASTER := --dma 1
 LDR_FLAGS-BFIN_BOOT_UART       := --dma 1
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/cm-bf561/config.mk

@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/ibf-dsp561/config.mk

@@ -27,4 +27,3 @@ CONFIG_BFIN_CPU = bf561-0.5
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/ip04/config.mk

@@ -31,4 +31,3 @@ CFLAGS_lib/lzma += -O2
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/tcm-bf518/config.mk

@@ -27,6 +27,3 @@ CONFIG_BFIN_CPU = bf518-0.0
 
 CFLAGS_lib += -O2
 CFLAGS_lib/lzma += -O2
-
-# Set some default LDR flags based on boot mode.
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/tcm-bf537/config.mk

@@ -30,4 +30,3 @@ CFLAGS_lib/lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
-LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))