Patches by Stephan Linz, 30 Jan 2004:

1: - board/altera/common/flash.c:flash_erase():
     o allow interrupts befor get_timer() call
     o check-up each erased sector and avoid unexpected timeouts
   - board/altera/dk1c20/dk1s10.c:board_early_init_f():
     o enclose sevenseg_set() in cpp condition
   - remove the ASMI configuration for DK1S10_standard_32 (never present)
   - fix some typed in mistakes in the NIOS documentation
2: - split DK1C20 configuration into several header files:
     o two new files for each NIOS CPU description
     o U-Boot related part is remaining in DK1C20.h
3: - split DK1S10 configuration into several header files:
     o two new files for each NIOS CPU description
     o U-Boot related part is remaining in DK1S10.h
4: - Add support for the Microtronix Linux Development Kit
     NIOS CPU configuration at the Altera Nios Development Kit,
     Stratix Edition (DK-1S10)
5: - Add documentation for the Altera Nios Development Kit,
     Stratix Edition (DK-1S10)
6: - Add support for the Nios Serial Peripharel Interface (SPI)
     (master only)
7: - Add support for the common U-Boot SPI framework at
     RTC driver DS1306

CHANGELOG

@@ -2,6 +2,30 @@
 Changes since U-Boot 1.0.1:
 ======================================================================
 
+* Patches by Stephan Linz, 30 Jan 2004:
+  1: - board/altera/common/flash.c:flash_erase():
+       o allow interrupts befor get_timer() call
+       o check-up each erased sector and avoid unexpected timeouts
+     - board/altera/dk1c20/dk1s10.c:board_early_init_f():
+       o enclose sevenseg_set() in cpp condition
+     - remove the ASMI configuration for DK1S10_standard_32 (never present)
+     - fix some typed in mistakes in the NIOS documentation
+  2: - split DK1C20 configuration into several header files:
+       o two new files for each NIOS CPU description
+       o U-Boot related part is remaining in DK1C20.h
+  3: - split DK1S10 configuration into several header files:
+       o two new files for each NIOS CPU description
+       o U-Boot related part is remaining in DK1S10.h
+  4: - Add support for the Microtronix Linux Development Kit
+       NIOS CPU configuration at the Altera Nios Development Kit,
+       Stratix Edition (DK-1S10)
+  5: - Add documentation for the Altera Nios Development Kit,
+       Stratix Edition (DK-1S10)
+  6: - Add support for the Nios Serial Peripharel Interface (SPI)
+       (master only)
+  7: - Add support for the common U-Boot SPI framework at
+       RTC driver DS1306
+
 * Patch by Rahul Shanbhag, 28 Jan 2004:
   Fix flash protection/locking handling for OMAP1610 innovator board.
 

MAKEALL

@@ -177,7 +177,7 @@ LIST_x86="${LIST_I486}"
 
 LIST_nios="	\
 	DK1C20 DK1C20_standard_32					\
-	DK1S10 DK1S10_standard_32					\
+	DK1S10 DK1S10_standard_32 DK1S10_mtx_ldk_20			\
 "
 
 #-----------------------------------------------------------------------

Makefile

@@ -1064,6 +1064,7 @@ DK1C20_config:	unconfig
 
 DK1S10_safe_32_config		\
 DK1S10_standard_32_config	\
+DK1S10_mtx_ldk_20_config	\
 DK1S10_config:	unconfig
 	@ >include/config.h
 	@[ -z "$(findstring _safe_32,$@)" ] || \
@@ -1074,6 +1075,10 @@ DK1S10_config:	unconfig
 		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
 		  echo "... NIOS 'standard_32' configuration" ; \
 		}
+	@[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
+		{ echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>include/config.h ; \
+		  echo "... NIOS 'mtx_ldk_20' configuration" ; \
+		}
 	@[ -z "$(findstring DK1S10_config,$@)" ] || \
 		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
 		  echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \

board/altera/common/flash.c

@@ -71,7 +71,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
 	volatile CFG_FLASH_WORD_SIZE *addr2;
 	int prot, sect;
-	int any = 0;
 	unsigned oldpri;
 	ulong start;
 
@@ -94,6 +93,12 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 		printf ("\n");
 	}
 
+#ifdef DEBUG
+	for (sect = s_first; sect <= s_last; sect++) {
+		printf("- Erase: Sect: %i @ 0x%08x\n", sect,  info->start[sect]);
+	}
+#endif
+
 	/* NOTE: disabling interrupts on Nios can be very bad since it
 	 * also disables the LO_LIMIT exception. It's better here to
 	 * set the interrupt priority to 3 & restore it when we're done.
@@ -114,27 +119,26 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			*addr = 0xaa;
 			*addr = 0x55;
 			*addr2 = 0x30;
-			any = 1;
-		}
-	}
-
-	/* Now just wait for 0xff & provide some user feedback while
-	 * we wait.
-	 */
-	if (any) {
-		addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
-		start = get_timer (0);
-		while (*addr2 != 0xff) {
-			udelay (1000 * 1000);
-			putc ('.');
-			if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
-				printf ("timeout\n");
-				return 1;
+			/* Now just wait for 0xff & provide some user
+			 * feedback while we wait. Here we have to grant
+			 * timer interrupts. Otherwise get_timer() can't
+			 * work right. */
+			ipri(oldpri);
+			start = get_timer (0);
+			while (*addr2 != 0xff) {
+				udelay (1000 * 1000);
+				putc ('.');
+				if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+					printf ("timeout\n");
+					return 1;
+				}
 			}
+			oldpri = ipri (3); /* disallow non important irqs again */
 		}
-		printf ("\n");
 	}
 
+	printf ("\n");
+
 	/* Restore interrupt priority */
 	ipri (oldpri);
 

board/altera/dk1c20/dk1c20.c

@@ -33,8 +33,10 @@ void _default_hdlr (void)
 
 int board_early_init_f (void)
 {
+#if	defined(CONFIG_SEVENSEG)
 	/* init seven segment led display and switch off */
 	sevenseg_set(SEVENSEG_OFF);
+#endif
 	return 0;
 }
 

board/altera/dk1s10/dk1s10.c

@@ -33,14 +33,24 @@ void _default_hdlr (void)
 
 int board_early_init_f (void)
 {
+#if	defined(CONFIG_SEVENSEG)
 	/* init seven segment led display and switch off */
 	sevenseg_set(SEVENSEG_OFF);
+#endif
 	return 0;
 }
 
 int checkboard (void)
 {
 	puts ("Board: Altera Nios 1S10 Development Kit\n");
+#if     defined(CONFIG_NIOS_SAFE_32)
+	puts ("Conf.: Altera Safe 32 (safe_32)\n");
+#elif   defined(CONFIG_NIOS_STANDARD_32)
+	puts ("Conf.: Altera Standard 32 (standard_32)\n");
+#elif   defined(CONFIG_NIOS_MTX_LDK_20)
+	puts ("Conf.: Microtronix LDK 2.0 (LDK2)\n");
+#endif
+
 	return 0;
 }
 

board/altera/dk1s10/vectors.S

@@ -1,6 +1,7 @@
 /*
  * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
  * Scott McNutt <smcnutt@psyent.com>
+ * Stephan Linz <linz@li-pro.net>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -21,6 +22,8 @@
  * MA 02111-1307 USA
  */
 
+#include <config.h>
+
 
 /*************************************************************************
  * Exception Vector Table
@@ -55,8 +58,14 @@
 	.align	4
 _vectors:
 
-	.long	_def_xhandler@h		/* Vector 0  - NMI */
-	.long	_cwp_lolimit@h		/* Vector 1  -  underflow */
+#if	defined(CFG_NIOS_CPU_OCI_BASE)
+	/* OCI does the reset job */
+	.long	_def_xhandler@h		/* Vector 0  - NMI / Reset */
+#else
+	/* there is no OCI, so we have to do a direct reset jump here */
+	.long	CFG_NIOS_CPU_RST_VECT	/* Vector 0  - Reset to GERMS */
+#endif
+	.long	_cwp_lolimit@h		/* Vector 1  - underflow */
 	.long	_cwp_hilimit@h		/* Vector 2  - overflow	*/
 
 	.long	_def_xhandler@h		/* Vector 3 - GNUPro debug */
@@ -72,7 +81,11 @@ _vectors:
 	.long	_def_xhandler@h		/* Vector 13 - future reserved */
 	.long	_def_xhandler@h		/* Vector 14 - future reserved */
 	.long	_def_xhandler@h		/* Vector 15 - future reserved */
+#if	(CFG_NIOS_TMRIRQ == 16)
+	.long	_timebase_int@h		/* Vector 16 - lopri timer*/
+#else
 	.long	_def_xhandler@h		/* Vector 16 */
+#endif
 	.long	_def_xhandler@h		/* Vector 17 */
 	.long	_def_xhandler@h		/* Vector 18 */
 	.long	_def_xhandler@h		/* Vector 19 */
@@ -106,7 +119,11 @@ _vectors:
 	.long	_def_xhandler@h		/* Vector 47 */
 	.long	_def_xhandler@h		/* Vector 48 */
 	.long	_def_xhandler@h		/* Vector 49 */
+#if	(CFG_NIOS_TMRIRQ == 50)
 	.long	_timebase_int@h		/* Vector 50 - lopri timer*/
+#else
+	.long	_def_xhandler@h		/* Vector 50 */
+#endif
 	.long	_def_xhandler@h		/* Vector 51 */
 	.long	_def_xhandler@h		/* Vector 52 */
 	.long	_def_xhandler@h		/* Vector 53 */

cpu/nios/Makefile

@@ -27,7 +27,7 @@ LIB	= lib$(CPU).a
 
 START	= start.o
 AOBJS	= traps.o
-OBJS	= cpu.o interrupts.o serial.o asmi.o
+OBJS	= cpu.o interrupts.o serial.o asmi.o spi.o
 
 all:	.depend $(START) $(LIB)
 

cpu/nios/spi.c

@@ -0,0 +1,158 @@
+/*
+ * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/ctype.h>
+
+#if defined(CONFIG_NIOS_SPI)
+#include <nios-io.h>
+#include <spi.h>
+
+#if !defined(CFG_NIOS_SPIBASE)
+#error "*** CFG_NIOS_SPIBASE not defined ***"
+#endif
+
+#if !defined(CFG_NIOS_SPIBITS)
+#error "*** CFG_NIOS_SPIBITS not defined ***"
+#endif
+
+#if (CFG_NIOS_SPIBITS != 8) && (CFG_NIOS_SPIBITS != 16)
+#error "*** CFG_NIOS_SPIBITS should be either 8 or 16 ***"
+#endif
+
+static nios_spi_t	*spi	= (nios_spi_t *)CFG_NIOS_SPIBASE;
+
+/* Warning:
+ * You cannot enable DEBUG for early system initalization, i. e. when
+ * this driver is used to read environment parameters like "baudrate"
+ * from EEPROM which are used to initialize the serial port which is
+ * needed to print the debug messages...
+ */
+#undef	DEBUG
+
+#ifdef  DEBUG
+
+#define	DPRINT(a)	printf a;
+/* -----------------------------------------------
+ * Helper functions to peek into tx and rx buffers
+ * ----------------------------------------------- */
+static const char * const hex_digit = "0123456789ABCDEF";
+
+static char quickhex (int i)
+{
+	return hex_digit[i];
+}
+
+static void memdump (void *pv, int num)
+{
+	int i;
+	unsigned char *pc = (unsigned char *) pv;
+
+	for (i = 0; i < num; i++)
+		printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
+	printf ("\t");
+	for (i = 0; i < num; i++)
+		printf ("%c", isprint (pc[i]) ? pc[i] : '.');
+	printf ("\n");
+}
+#else   /* !DEBUG */
+
+#define	DPRINT(a)
+#define	memdump(p,n)
+
+#endif  /* DEBUG */
+
+
+/*
+ * SPI transfer:
+ *
+ * See include/spi.h and http://www.altera.com/literature/ds/ds_nios_spi.pdf
+ * for more informations.
+ */
+int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+{
+	int j;
+
+	DPRINT(("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
+		(int)chipsel, *(uint *)dout, *(uint *)din, bitlen));
+
+	memdump((void*)dout, (bitlen + 7) / 8);
+
+	if(chipsel != NULL) {
+		chipsel(1);	/* select the target chip */
+	}
+
+	if (bitlen > CFG_NIOS_SPIBITS) {	/* leave chip select active */
+		spi->control |= NIOS_SPI_SSO;
+	}
+
+	for (	j = 0;				/* count each byte in */
+		j < ((bitlen + 7) / 8);		/* dout[] and din[] */
+
+#if	(CFG_NIOS_SPIBITS == 8)
+		j++) {
+
+		while ((spi->status & NIOS_SPI_TRDY) == 0)
+			;
+		spi->txdata = (unsigned)(dout[j]);
+
+		while ((spi->status & NIOS_SPI_RRDY) == 0)
+			;
+		din[j] = (unsigned char)(spi->rxdata & 0xff);
+
+#elif	(CFG_NIOS_SPIBITS == 16)
+		j++, j++) {
+
+		while ((spi->status & NIOS_SPI_TRDY) == 0)
+			;
+		if ((j+1) < ((bitlen + 7) / 8))
+			spi->txdata = (unsigned)((dout[j] << 8) | dout[j+1]);
+		else
+			spi->txdata = (unsigned)(dout[j] << 8);
+
+		while ((spi->status & NIOS_SPI_RRDY) == 0)
+			;
+		din[j] = (unsigned char)((spi->rxdata >> 8) & 0xff);
+		if ((j+1) < ((bitlen + 7) / 8))
+			din[j+1] = (unsigned char)(spi->rxdata & 0xff);
+
+#else
+#error "*** unsupported value of CFG_NIOS_SPIBITS ***"
+#endif
+
+	}
+
+	if (bitlen > CFG_NIOS_SPIBITS) {
+		spi->control &= ~NIOS_SPI_SSO;
+	}
+
+	if(chipsel != NULL) {
+		chipsel(0);	/* deselect the target chip */
+	}
+
+	memdump((void*)din, (bitlen + 7) / 8);
+
+	return 0;
+}
+
+#endif /* CONFIG_NIOS_SPI */

doc/README.dk1c20

@@ -24,7 +24,7 @@ Contents:
 
 1. Files
 =========
-	board/dk1c20/*
+	board/altera/dk1c20/*
 	include/configs/DK1C20.h
 
 2. Memory Organization
@@ -73,11 +73,7 @@ see the following:
 2. Quit nios-run and start your terminal application (e.g. start
 Hyperterminal or minicom).
 
-3. From the U-Boot command prompt, erase flash 0x40000 to 0x 5ffff:
-
-    ==> erase 1:4-5
-
-4. Download the u-boot code to RAM. When using Hyperterminal, do the
+3. Download the u-boot code to RAM. When using Hyperterminal, do the
 following:
 
    a.  From the u-boot command prompt start a binary download to SRAM:
@@ -86,6 +82,10 @@ following:
 
     b. Download u-boot.bin using kermit.
 
+4. From the U-Boot command prompt, erase flash 0x40000 to 0x5ffff:
+
+    ==> erase 1:4-5
+
 5. Copy the binary image from SRAM to flash:
 
     ==> cp.b 800000 40000 10000

doc/README.dk1c20_std32

@@ -91,10 +91,10 @@ IDE:	(TODO)
   0x02000000 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  SDRAM	       |	       :	       |  > CFG_NIOS_CPU_SRAM_SIZE
+  SDRAM	       |	       :	       |  > CFG_NIOS_CPU_SDRAM_SIZE
 	       |	       :	       | |   = 0x01000000
 	       |	       :	       | /
-  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SRAM_BASE
+  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SDRAM_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -345,6 +345,7 @@ IDE:	(TODO)
 	       |	       :	       | |
   0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
 	       |	       :	       | /
+  0x00000000   |- - - - - - - -:- - - - - - - -+- - u-boot environment
   0x00000000 ---8-------------4|3-------------0-
 
 

doc/README.dk1s10

@@ -0,0 +1,131 @@
+
+			 Nios Development Kit
+			   Startix Editions
+
+		    Last Update: January 28, 2004
+====================================================================
+
+This file contains information regarding U-Boot and the Altera
+Nios Development Kit, Startix Edition (DK-1S10). For general Nios
+information see doc/README.nios.
+
+Most stuff of this file was borrowed and based on README.dk1c20,
+the DK-1C20 related information file.
+
+For those interested in contributing ... see HELP WANTED section
+in doc/README.nios.
+
+Contents:
+
+	1. Files
+	2. Memory Organization
+	3. CPU Variations
+	4. Examples
+	5. Programming U-Boot into FLASH with GERMS
+
+====================================================================
+
+1. Files
+=========
+	board/altera/dk1s10/*
+	include/configs/DK1S10.h
+
+2. Memory Organization
+=======================
+
+	-The heap is placed below the monitor (U-Boot code).
+	-Global data is placed below the heap.
+	-The stack is placed below global data (&grows down).
+
+3. CPU Variations
+=================
+
+There are more than one NIOS CPU variation for the DK-1S10. U-Boot
+supports the following CPU configurations:
+
+	- Altera Standard 32 (make DK1S10_standard_32_config)
+	- Microtronix LDK 2.0 (make DK1S10_mtx_ldk_20_config)
+
+4. Examples
+============
+
+The hello_world example was never tested on DK-1S10. Neverthelse
+it should work as far as possible, because the DK-1S10 port is
+more than ninetieth percents equal to the DK-1C20 port and at
+this platform the hello_world example was already tested
+successfully (see README.dk1c20).
+
+
+5. Programming U-Boot into FLASH with GERMS
+============================================
+The current version of the DK-1S10 port with the default
+configuration settings occupies about 78 KBytes of flash.
+A minimal configuration occupies less than 60 KByte
+(network support disabled).
+
+To program U-Boot into the DK-1S10 flash using GERMS do the
+following:
+
+1. From the command line, download U-Boot using the nios-run:
+
+	$ nios-run -r u-boot.srec
+
+This takes about 45 seconds (GERMS is not very speedy here).
+After u-boot is downloaded it will be executed. You should
+see the following:
+
+    U-Boot 1.0.2 (Jan 28 2004 - 19:02:30)
+
+    CPU: Nios-32 Rev. 3.3 (0x3038)
+    Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14
+    Board: Altera Nios 1S10 Development Kit
+    In:    serial
+    Out:   serial
+    Err:   serial
+    DK1S10 >
+
+
+2. Quit nios-run and start your terminal application (e.g. start
+   Hyperterminal or minicom).
+
+3. Download the u-boot code to RAM. When using Hyperterminal, do the
+   following:
+
+   a. From the u-boot command prompt start a binary download to
+      SRAM / SDRAM:
+
+      at the Altera Standard 32 to SRAM:
+
+	==> loadb 800000
+
+      at the Microtronix LDK 2.0 to SDRAM:
+
+	==> loadb 1010000
+
+   b. Download u-boot.bin using kermit.
+
+4. From the U-Boot command prompt, erase flash:
+
+   at the Altera Standard 32 from 0x40000 to 0x5ffff:
+
+	==> erase 1:4-5
+
+   at the Microtronix LDK 2.0 from 0x8000000 to 0x81ffff:
+
+	==> erase 1:0-1
+
+5. Copy the binary image from SRAM / SDRAM to flash:
+
+   at the Altera Standard 32 to SRAM:
+
+	==> cp.b 800000 40000 $(filesize)
+
+   at the Microtronix LDK 2.0 to SDRAM:
+
+	==> cp.b 1010000 8000000 $(filesize)
+
+U-Boot will now automatically start when the board is powered on or
+reset using the Standard-32 configuration. To start U-Boot with the
+Safe-32 configuration, enter the following GERMS command:
+
+    + g 40000

doc/README.dk1s10_mldk20

@@ -0,0 +1,286 @@
+
+TODO:	specify IDE i/f
+
+
+===============================================================================
+	C P U ,	  M E M O R Y ,	  I N / O U T	C O M P O N E N T S
+===============================================================================
+see also [1]-[5]
+
+CPU:	"LDK2"
+	32 bit NIOS for 75 MHz
+	512 Byte for register file (30 levels)
+	with out instruction cache
+	with out data cache
+	2 KByte On Chip ROM with GERMS boot monitor
+	with out On Chip RAM
+	MSTEP multiplier
+	no Debug Core
+	no On Chip Instrumentation (OCI)
+
+	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 75000000
+			CFG_NIOS_CPU_ICACHE	     = (not present)
+			CFG_NIOS_CPU_DCACHE	     = (not present)
+			CFG_NIOS_CPU_REG_NUMS	     = 512
+			CFG_NIOS_CPU_MUL	     = 0
+			CFG_NIOS_CPU_MSTEP	     = 1
+			CFG_NIOS_CPU_DBG_CORE	     = 0
+
+IRQ:	 Nr.  | used by
+	------+--------------------------------------------------------
+	 16   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 16
+	 17   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 17
+	 18   | UART1	  |  CFG_NIOS_CPU_UART1_IRQ  = 18
+	 20   | LAN91C111 |  CFG_NIOS_CPU_LAN0_IRQ   = 20
+	 25   | IDE0	  |  CFG_NIOS_CPU_IDE0_IRQ   = 25
+
+MEMORY:	 8 MByte Flash
+	16 MByte SDRAM
+
+Timer:	TIMER0: high priority programmable timer (IRQ16)
+
+	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 0
+			CFG_NIOS_CPU_USER_TIMER	     = (not present)
+
+PIO:	 Nr.  | description
+	------+--------------------------------------------------------
+	 PIO0 | CFPOWER:    1 output to controll CF power supply
+	 PIO1 | BUTTON:	    4 inputs for user push buttons (no IRQ)
+	------+--------------------------------------------------------
+	 not  | LCD:	   11 in/outputs for ASCII LCD
+	 pres.| LED:	    8 outputs for user LEDs
+	      | SEVENSEG:  16 outputs for user seven segment display
+	      | RECONF:	    1 in/output for . . . . . . . . . . . .
+	      | CFPRESENT:  1 input for CF present event (IRQ35)
+	      | CFATASEL:   1 output to controll CF ATA card select
+
+	U-Boot CFG:	CFG_NIOS_CPU_BUTTON_PIO	     = 1
+			CFG_NIOS_CPU_LCD_PIO	     = (not present)
+			CFG_NIOS_CPU_LED_PIO	     = (not present)
+			CFG_NIOS_CPU_SEVENSEG_PIO    = (not present)
+			CFG_NIOS_CPU_RECONF_PIO	     = (not present)
+			CFG_NIOS_CPU_CFPRESENT_PIO   = (not present)
+			CFG_NIOS_CPU_CFPOWER_PIO     = 0
+			CFG_NIOS_CPU_CFATASEL_PIO    = (not present)
+
+UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
+	       without handshake RTS/CTS (IRQ17)
+	UART1: fixed baudrate of 115200, fixed protocol 8N1,
+	       without handshake RTS/CTS (IRQ18)
+
+LAN:	SMsC LAN91C111 with:
+	  - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
+	  - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
+
+IDE:	(TODO)
+
+
+===============================================================================
+	M E M O R Y   M A P
+===============================================================================
+
+- - - - - - - - - - -   external memory   - - - - - - - - - - - - - - - - - - -
+
+  0x02000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_STACK
+  0x02000000 --+32-----------16|15------------0+
+	       |	       .	       | \ \
+	       |	       .	       | | |
+	       |	       .	       | |  > stack area
+	       |	       .	       | | |
+	       |	       .	       | | V
+	       |	       .	       | |
+	       |	       .	       | |
+  SDRAM	       |	       .	       |  > CFG_NIOS_CPU_SDRAM_SIZE
+	       |	       .	       | |   = 0x01000000
+	       |	       .	       | |
+  0x01000100   |- - - - - - - - - - - - - - - -+-|-
+	       |	       .	       | | \
+	       |	       .	       | | |
+	       |	       .	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       .	       | | |   = 0x00000100
+	       |			       | / /
+  0x01000000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_VEC_BASE
+  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SDRAM_BASE
+	       |  sector 127		       | \
+    + 0x7f0000 |- - - - - - - - - - - - - - - -| |
+	       |	       :	       | |
+  Flash	       |-   -	-   -  :  -   -	  -   -|  > CFG_NIOS_CPU_FLASH_SIZE
+	       |  sector 1     :	       | |   = 0x00800000
+    + 0x010000 |- - - - - - - - - - - - - - - -| |
+	       |  sector 0 (size = 0x10000)    | /
+  0x00800000 ---8-------------4|3-------------0-    CFG_NIOS_CPU_FLASH_BASE
+	       |			       |
+	       :	      gap	       :
+	       :			       :
+
+- - - - - - - - - - -	 external i/o	  - - - - - - - - - - - - - - - - - - -
+
+	       :			       :
+	       :	      gap	       :
+	       |			       |
+  0x00020000 ---32-----------16|15------------0-
+	       |	      gap	       | \
+  0x00010310 --+-------------------------------| |
+	       |			       | |
+	       |  register bank (size = 0x10)  | |
+	       | +--------.---.---.---	       | |
+	       | | bank 0 \ 1 \ 2 \ 3 \	       | |
+	       | |---------------------------+ | |
+  LAN91C111    | | BANK	       | RESERVED    | | |
+	       | |- - - - - - -|- - - - - - -| |  > na_enet_size
+	       | | RPCR	       | MIR	     | | |   = 0x00010000
+	       | |- - - - - - -|- - - - - - -| | |
+	       | | COUNTER     | RCR	     | | |
+	       | |- - - - - - -|- - - - - - -| | |
+	       | | EPH STATUS  | TCR	     | | |
+	       | +---------------------------+ | |
+  0x00010300 --+--LAN91C111_REGISTERS_OFFSET---| |
+	       |	      gap	       | /
+  0x00010000 ---32-----------16|15------------0-    CFG_NIOS_CPU_LAN0_BASE
+	       |			       |
+	       :	      gap	       :
+	       :			       :
+
+- - - - - - - - - - -	  on chip i/o	  - - - - - - - - - - - - - - - - - - -
+
+	       :			       :
+	       :	      gap	       :
+	       |			       |
+  0x00000980 ---32-----------16|15------------0-
+	       |	       |	       | \
+	       :  (real size   :	       : |
+  IDE i/f      :   and content :	       :  > 0x00000080
+  [5]	       :   unknown)    :	       : |
+	       |	       |	       | /
+  0x00000900 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE0
+	       |			       | \
+	       :	      gap	       :  > (space for PIO4..7)
+	       |			       | /
+  0x000008c0 ---32-----------16|15------------0-
+	       |		     (unused)  | \
+	+ 0x1c |- - - - - - - - - - - - - - - -| |
+	       |		     (unused)  | |
+	+ 0x18 |- - - - - - - - - - - - - - - -| |
+	       |		     (unused)  | |
+	+ 0x14 |- - - - - - - - - - - - - - - -| |
+  UART1	       |		     (unused)  |  > 0x00000020
+  [2]	+ 0x10 |- - - - - - - - - - - - - - - -| |
+	       |  control (10 bit)	 (rw)  | |
+	+ 0x0c |- - - - - - - - - - - - - - - -| |
+	       |  status (10 bit)	 (rw)  | |
+	+ 0x08 |- - - - - - - - - - - - - - - -| |
+	       |  txdata (8 bit)	 (wo)  | |
+	+ 0x04 |- - - - - - - - - - - - - - - -| |
+	       |  rxdata (8 bit)	 (ro)  | /
+  0x000008a0 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART1
+	       |			       | \
+	       :	      gap	       :  > (space for PIO2..3)
+	       |			       | /
+  0x00000880 ---32-----------16|15------------0-
+	       |  edgecapture (4 bit)	 (rw)  | \
+	+ 0x0c |- - - - - - - - - - - - - - - -| |
+  PIO1	       |  interruptmask (4 bit)	 (rw)  | |
+  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
+	       |		     (unused)  | |
+	+ 0x04 |- - - - - - - - - - - - - - - -| |
+	       |  data (4 bit)		 (ro)  | /
+  0x00000870 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+	       |		     (unused)  | \
+	+ 0x0c |- - - - - - - - - - - - - - - -| |
+  PIO0	       |		     (unused)  | |
+  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
+	       |		     (unused)  | |
+	+ 0x04 |- - - - - - - - - - - - - - - -| |
+	       |  data (1 bit)		 (wo)  | /
+  0x00000860 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+	       |		     (unused)  | \
+	+ 0x1c |- - - - - - - - - - - - - - - -| |
+	       |		     (unused)  | |
+	+ 0x18 |- - - - - - - - - - - - - - - -| |
+	       |  snaph (16 bit)	 (rw)  | |
+	+ 0x14 |- - - - - - - - - - - - - - - -| |
+  TIMER0       |  snapl (16 bit)	 (rw)  | |
+  [3]	+ 0x10 |- - - - - - - - - - - - - - - -|  > 0x00000020
+	       |  periodh (16 bit)	 (rw)  | |
+	+ 0x0c |- - - - - - - - - - - - - - - -| |
+	       |  periodl (16 bit)	 (rw)  | |
+	+ 0x08 |- - - - - - - - - - - - - - - -| |
+	       |  control (4 bit)	 (rw)  | |
+	+ 0x04 |- - - - - - - - - - - - - - - -| |
+	       |  status (2 bit)	 (rw)  | /
+  0x00000840 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+	       |			       | \
+	       :	      gap	       :  > (space for UART2)
+	       |			       | /
+  0x00000820 ---32-----------16|15------------0-
+	       |		     (unused)  | \
+	+ 0x1c |- - - - - - - - - - - - - - - -| |
+	       |		     (unused)  | |
+	+ 0x18 |- - - - - - - - - - - - - - - -| |
+	       |		     (unused)  | |
+	+ 0x14 |- - - - - - - - - - - - - - - -| |
+  UART0	       |		     (unused)  |  > 0x00000020
+  [2]	+ 0x10 |- - - - - - - - - - - - - - - -| |
+	       |  control (10 bit)	 (rw)  | |
+	+ 0x0c |- - - - - - - - - - - - - - - -| |
+	       |  status (10 bit)	 (rw)  | |
+	+ 0x08 |- - - - - - - - - - - - - - - -| |
+	       |  txdata (8 bit)	 (wo)  | |
+	+ 0x04 |- - - - - - - - - - - - - - - -| |
+	       |  rxdata (8 bit)	 (ro)  | /
+  0x00000800 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+
+- - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
+
+  0x00000800 ---32-----------16|15------------0-
+	       |	       :	       | \
+	       |	       :	       | |
+  GERMS	       |	       :	       |  > CFG_NIOS_CPU_ROM_SIZE
+	       |	       :	       | |   = 0x00000800
+	       |	       :	       | /
+  0x00000000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
+  0x00000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_ROM_BASE
+
+===============================================================================
+	F L A S H   M E M O R Y	  A L L O C A T I O N
+===============================================================================
+
+  0x01000000 ---8-------------4|3-------------0-
+	       |	       :	       | \
+  SAFE	       |	       :	       |  > 1 MByte
+  FPGA conf.   |	       :	       | /    (NOT usable by software)
+  0x00f00000 --+- - - - - - - -:- - - - - - - -+-
+	       |	       :	       | \
+  USER	       |	       :	       |  > 1 MByte
+  FPGA conf.   |	       :	       | /    (NOT usable by software)
+  0x00e00000 --+- - - - - - - -:- - - - - - - -+-
+	       |	       :	       | \
+	       |	       :	       | |
+  WEB pages    |	       :	       |  > 2 MByte
+	       |	       :	       | |    (provisory usable)
+	       |	       :	       | /
+  0x00c00000 --+- - - - - - - -:- - - - - - - -+-
+	       |	       :	       | \
+	       |	       :	       | |
+	       |	       :	       | |
+	       |	       :	       |  > 4 MByte free for use
+	       |	       :	       | |
+  0x00840000 --+- - - - - - - -:- - - - - - - -+-|- u-boot environment
+	       |	       :	       | /
+  0x00800000   |- - - - - - - -:- - - - - - - -+- - u-boot _start()
+  0x00800000 ---8-------------4|3-------------0-
+
+
+===============================================================================
+	R E F E R E N C E S
+===============================================================================
+[1]	http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf
+[2]	http://www.altera.com/literature/ds/ds_nios_uart.pdf
+[3]	http://www.altera.com/literature/ds/ds_nios_timer.pdf
+[4]	http://www.altera.com/literature/ds/ds_nios_pio.pdf
+[5]	http://www.opencores.org/projects/ata/
+	http://www.t13.org/index.html
+
+
+===============================================================================
+Stephan Linz <linz@li-pro.net>

doc/README.dk1s10_std32

@@ -87,10 +87,10 @@ IDE:	(TODO)
   0x02000000 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  SDRAM	       |	       :	       |  > CFG_NIOS_CPU_SRAM_SIZE
+  SDRAM	       |	       :	       |  > CFG_NIOS_CPU_SDRAM_SIZE
 	       |	       :	       | |   = 0x01000000
 	       |	       :	       | /
-  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SRAM_BASE
+  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SDRAM_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -335,6 +335,7 @@ IDE:	(TODO)
 	       |	       :	       | |
   0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
 	       |	       :	       | /
+  0x00000000   |- - - - - - - -:- - - - - - - -+- - u-boot environment
   0x00000000 ---8-------------4|3-------------0-
 
 

doc/README.dk20k200_std32

@@ -117,7 +117,7 @@ UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	+ 0x18 |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
 	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  UART0	       |		     (unused)  |  > 0x00000020
+  UART1	       |		     (unused)  |  > 0x00000020
   [2]	+ 0x10 |- - - - - - - - - - - - - - - -| |
 	       |  control (10 bit)	 (rw)  | |
 	+ 0x0c |- - - - - - - - - - - - - - - -| |

doc/README.nios

@@ -1,7 +1,7 @@
 
 			   U-Boot for Nios-32
 
-		    Last Update: January 2, 2004
+		    Last Update: February 1, 2004
 ====================================================================
 
 This file contains information regarding U-Boot and the Altera
@@ -103,6 +103,13 @@ CFG_NIOS_TMRMS -- the period of the timer in milliseconds.
 CFG_NIOS_ASMIBASE -- the base address of the ASMI peripheral.
 	(standard-32: na_asmi_base).
 
+CFG_NIOS_SPIBASE -- the base address of the SPI master (!) peripheral.
+	(nasys_spi_0)
+
+CFG_NIOS_SPIBITS -- the amount of configured SPI data bits in PTF.
+	This value can be 8 or 16 only! (PTF: databits)
+
+
 2.2 Differences in U-Boot Options/Settings
 -------------------------------------------
 Some 'standard' U-Boot options/settings are treated differently in

include/configs/DK1C20.h

@@ -25,264 +25,17 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*
- * NIOS CPU configuration.
+/***********************************************************************
+ * Include the whole NIOS CPU configuration.
  *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
+ * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
  *
- *	#define	CFG_NIOS_CPU_ICACHE	4096
- *	#define	CFG_NIOS_CPU_DCACHE	0
- *	#define	CFG_NIOS_CPU_OCI_BASE	0
- *	#define	CFG_NIOS_CPU_OCI_SIZE	0
- */
+ ***********************************************************************/
 
 #if	defined(CONFIG_NIOS_SAFE_32)
-
-/* TODO */
-
+#include <configs/DK1C20_safe_32.h>
 #elif	defined(CONFIG_NIOS_STANDARD_32)
-
-/* CPU core */
-#define	CFG_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
-#define	CFG_NIOS_CPU_ICACHE	(4 * 1024)	/* instruction cache	*/
-#define	CFG_NIOS_CPU_DCACHE	(4 * 1024)	/* data cache		*/
-#define	CFG_NIOS_CPU_REG_NUMS	256		/* number of register	*/
-#define	CFG_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_STACK	0x008fff00	/* stack top	addr	*/
-#define	CFG_NIOS_CPU_VEC_BASE	0x008fff00	/* IRQ vectors	addr	*/
-#define	CFG_NIOS_CPU_VEC_SIZE	256		/*		size	*/
-#define	CFG_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
-#define	CFG_NIOS_CPU_RST_VECT	0x00920000	/* RESET vector	addr	*/
-#define	CFG_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
-						/*		yes(1)	*/
-
-/* on-chip extensions */
-#define	CFG_NIOS_CPU_RAM_BASE	0		/* on chip RAM	addr	*/
-#define	CFG_NIOS_CPU_RAM_SIZE	0		/*		size	*/
-
-#define	CFG_NIOS_CPU_ROM_BASE	0x00920000	/* on chip ROM	addr	*/
-#define	CFG_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
-
-#define	CFG_NIOS_CPU_OCI_BASE	0x00920800	/* OCI core	addr	*/
-#define	CFG_NIOS_CPU_OCI_SIZE	256		/*		size	*/
-
-/* timer */
-#define	CFG_NIOS_CPU_TIMER_NUMS	2		/* number of timer	*/
-
-#define	CFG_NIOS_CPU_TIMER0	0x00920940	/* TIMER0	addr	*/
-#define	CFG_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
-#define	CFG_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
-#define	CFG_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
-						/*		yes(1)	*/
-
-#define	CFG_NIOS_CPU_TIMER1	0x009209e0	/* TIMER1	addr	*/
-#define	CFG_NIOS_CPU_TIMER1_IRQ	50		/*		IRQ	*/
-#define	CFG_NIOS_CPU_TIMER1_PER	10000		/*  periode	usec	*/
-#define	CFG_NIOS_CPU_TIMER1_AR	1		/*  always run:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER1_FP	1		/*  fixed per:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER1_SS	0		/*  snaphot:	no(0)	*/
-						/*		yes(1)	*/
-
-/* serial i/o */
-#define	CFG_NIOS_CPU_UART_NUMS	1		/* number of uarts	*/
-
-#define	CFG_NIOS_CPU_UART0	0x00920900	/* UART0	addr	*/
-#define	CFG_NIOS_CPU_UART0_IRQ	25		/*		IRQ	*/
-#define	CFG_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
-#define	CFG_NIOS_CPU_UART0_DB	8		/*  data bit		*/
-#define	CFG_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
-#define	CFG_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
-						/*		odd(1)	*/
-						/*		even(2)	*/
-#define	CFG_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
-						/*		crts(1)	*/
-#define	CFG_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
-						/*		yes(1)	*/
-
-/* parallel i/o */
-#define	CFG_NIOS_CPU_PIO_NUMS	8		/* number of parports	*/
-
-#define	CFG_NIOS_CPU_PIO0	0x00920960	/* PIO0		addr	*/
-#define	CFG_NIOS_CPU_PIO0_IRQ	40		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO0_BITS	4		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO0_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO0_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO0_EDGE	3		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO0_ITYPE	2		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO1	0x00920970	/* PIO1		addr	*/
-#undef	CFG_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO1_BITS	11		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO2	0x00920980	/* PIO2		addr	*/
-#undef	CFG_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO2_BITS	8		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO2_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO3	0x00920990	/* PIO3		addr	*/
-#undef	CFG_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO3_BITS	16		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO3_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO4	0x009209a0	/* PIO4		addr	*/
-#undef	CFG_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO4_TYPE	0		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO5	0x009209b0	/* PIO5		addr	*/
-#define	CFG_NIOS_CPU_PIO5_IRQ	35		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO5_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO5_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO5_EDGE	3		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO5_ITYPE	2		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO6	0x009209c0	/* PIO6		addr	*/
-#undef	CFG_NIOS_CPU_PIO6_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO6_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO6_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO6_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO6_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO7	0x009209d0	/* PIO7		addr	*/
-#undef	CFG_NIOS_CPU_PIO7_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO7_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO7_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO7_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO7_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-/* IDE i/f */
-#define	CFG_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
-#define	CFG_NIOS_CPU_IDE0	0x00920a00	/* IDE0		addr	*/
-
-/* active serial memory i/f */
-#define	CFG_NIOS_CPU_ASMI_NUMS	1		/* number of ASMI	*/
-#define	CFG_NIOS_CPU_ASMI0	0x00920b00	/* ASMI0	addr	*/
-#define	CFG_NIOS_CPU_ASMI0_IRQ	45		/*		IRQ	*/
-
-/* memory accessibility */
-#define	CFG_NIOS_CPU_SRAM_BASE	0x00800000	/* board SRAM	addr	*/
-#define	CFG_NIOS_CPU_SRAM_SIZE	(1024 * 1024)	/*  1 MB	size	*/
-
-#define	CFG_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
-#define	CFG_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
-
-#define	CFG_NIOS_CPU_FLASH_BASE	0x00000000	/* board Flash	addr	*/
-#define	CFG_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
-
-/* LAN */
-#define	CFG_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
-
-#define	CFG_NIOS_CPU_LAN0_BASE	0x00910000	/* LAN0		addr	*/
-#define	CFG_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
-#define	CFG_NIOS_CPU_LAN0_IRQ	30		/*		IRQ	*/
-#define	CFG_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
-#define	CFG_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
-						/*	cs8900(1)	*/
-						/* ex:	alteramac(2)	*/
-
-/* symbolic redefinition (undef, if not present) */
-#define	CFG_NIOS_CPU_USER_TIMER		0	/* TIMER0: users choice	*/
-#define	CFG_NIOS_CPU_TICK_TIMER		1	/* TIMER1: tick (needed)*/
-
-#define	CFG_NIOS_CPU_BUTTON_PIO		0	/* PIO0: buttons	*/
-#define	CFG_NIOS_CPU_LCD_PIO		1	/* PIO1: ASCII LCD	*/
-#define	CFG_NIOS_CPU_LED_PIO		2	/* PIO2: LED bar	*/
-#define	CFG_NIOS_CPU_SEVENSEG_PIO	3	/* PIO3: 7-seg. display	*/
-#define	CFG_NIOS_CPU_RECONF_PIO		4	/* PIO4: reconf pin	*/
-#define	CFG_NIOS_CPU_CFPRESENT_PIO	5	/* PIO5: CF present IRQ	*/
-#define	CFG_NIOS_CPU_CFPOWER_PIO	6	/* PIO6: CF power/sw.	*/
-#define	CFG_NIOS_CPU_CFATASEL_PIO	7	/* PIO7: CF ATA select	*/
-
+#include <configs/DK1C20_standard_32.h>
 #else
 #error *** CFG_ERROR: you have to setup right NIOS CPU configuration
 #endif
@@ -419,9 +172,6 @@
 
 #if	(CFG_NIOS_CPU_LAN0_TYPE == 0)		/* LAN91C111		*/
 
-	/****************************************************/
-	/* !!! LAN91C111 works for NIOS with patch only !!! */
-	/****************************************************/
 #define	CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
 #undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
 #define	CONFIG_SMC91111_BASE	(CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
@@ -558,15 +308,15 @@
 
 #if	(CFG_NIOS_CPU_SEVENSEG_PIO == 0)
 
-#error *** CFG_ERROR: status LEDs at PIO0 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO0 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 1)
 
-#error *** CFG_ERROR: status LEDs at PIO1 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO1 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 2)
 
-#error *** CFG_ERROR: status LEDs at PIO2 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO2 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 3)
 
@@ -582,27 +332,27 @@
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 4)
 
-#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO4 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 5)
 
-#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO5 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 6)
 
-#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO6 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 7)
 
-#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO7 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 8)
 
-#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO8 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 9)
 
-#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO9 not supported, expand your config.h
 
 #else
 #error *** CFG_ERROR: you have to set CFG_NIOS_CPU_SEVENSEG_PIO in right case

include/configs/DK1C20_safe_32.h

@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_DK1C20_SAFE_32_H
+#define __CONFIG_DK1C20_SAFE_32_H
+
+/*
+ * NIOS CPU configuration. (PART OF configs/DK1C20.h)
+ *
+ * !!! TODO !!! TODO !!!
+ */
+#error *** CFG_ERROR: DK1C20_safe_32 have to be defined (use DK1C20_standard_32 as template)
+
+#endif	/* __CONFIG_DK1C20_SAFE_32_H */

include/configs/DK1C20_standard_32.h

@@ -0,0 +1,279 @@
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_DK1C20_STANDARD_32_H
+#define __CONFIG_DK1C20_STANDARD_32_H
+
+/*
+ * NIOS CPU configuration. (PART OF configs/DK1C20.h)
+ *
+ * Here we must define CPU dependencies. Any unsupported option have to
+ * be defined with zero, example CPU without data cache / OCI:
+ *
+ *	#define	CFG_NIOS_CPU_ICACHE	4096
+ *	#define	CFG_NIOS_CPU_DCACHE	0
+ *	#define	CFG_NIOS_CPU_OCI_BASE	0
+ *	#define	CFG_NIOS_CPU_OCI_SIZE	0
+ */
+
+/* CPU core */
+#define	CFG_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
+#define	CFG_NIOS_CPU_ICACHE	(4 * 1024)	/* instruction cache	*/
+#define	CFG_NIOS_CPU_DCACHE	(4 * 1024)	/* data cache		*/
+#define	CFG_NIOS_CPU_REG_NUMS	256		/* number of register	*/
+#define	CFG_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_STACK	0x008fff00	/* stack top	addr	*/
+#define	CFG_NIOS_CPU_VEC_BASE	0x008fff00	/* IRQ vectors	addr	*/
+#define	CFG_NIOS_CPU_VEC_SIZE	256		/*		size	*/
+#define	CFG_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
+#define	CFG_NIOS_CPU_RST_VECT	0x00920000	/* RESET vector	addr	*/
+#define	CFG_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
+						/*		yes(1)	*/
+
+/* on-chip extensions */
+#define	CFG_NIOS_CPU_RAM_BASE	0		/* on chip RAM	addr	*/
+#define	CFG_NIOS_CPU_RAM_SIZE	0		/*		size	*/
+
+#define	CFG_NIOS_CPU_ROM_BASE	0x00920000	/* on chip ROM	addr	*/
+#define	CFG_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
+
+#define	CFG_NIOS_CPU_OCI_BASE	0x00920800	/* OCI core	addr	*/
+#define	CFG_NIOS_CPU_OCI_SIZE	256		/*		size	*/
+
+/* timer */
+#define	CFG_NIOS_CPU_TIMER_NUMS	2		/* number of timer	*/
+
+#define	CFG_NIOS_CPU_TIMER0	0x00920940	/* TIMER0	addr	*/
+#define	CFG_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
+#define	CFG_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
+#define	CFG_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
+						/*		yes(1)	*/
+
+#define	CFG_NIOS_CPU_TIMER1	0x009209e0	/* TIMER1	addr	*/
+#define	CFG_NIOS_CPU_TIMER1_IRQ	50		/*		IRQ	*/
+#define	CFG_NIOS_CPU_TIMER1_PER	10000		/*  periode	usec	*/
+#define	CFG_NIOS_CPU_TIMER1_AR	1		/*  always run:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_TIMER1_FP	1		/*  fixed per:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_TIMER1_SS	0		/*  snaphot:	no(0)	*/
+						/*		yes(1)	*/
+
+/* serial i/o */
+#define	CFG_NIOS_CPU_UART_NUMS	1		/* number of uarts	*/
+
+#define	CFG_NIOS_CPU_UART0	0x00920900	/* UART0	addr	*/
+#define	CFG_NIOS_CPU_UART0_IRQ	25		/*		IRQ	*/
+#define	CFG_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
+#define	CFG_NIOS_CPU_UART0_DB	8		/*  data bit		*/
+#define	CFG_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
+#define	CFG_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
+						/*		odd(1)	*/
+						/*		even(2)	*/
+#define	CFG_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
+						/*		crts(1)	*/
+#define	CFG_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
+						/*		yes(1)	*/
+
+/* parallel i/o */
+#define	CFG_NIOS_CPU_PIO_NUMS	8		/* number of parports	*/
+
+#define	CFG_NIOS_CPU_PIO0	0x00920960	/* PIO0		addr	*/
+#define	CFG_NIOS_CPU_PIO0_IRQ	40		/*		IRQ	*/
+#define	CFG_NIOS_CPU_PIO0_BITS	4		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO0_TYPE	2		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO0_CAP	1		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO0_EDGE	3		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO0_ITYPE	2		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO1	0x00920970	/* PIO1		addr	*/
+#undef	CFG_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO1_BITS	11		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO2	0x00920980	/* PIO2		addr	*/
+#undef	CFG_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO2_BITS	8		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO2_TYPE	1		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO3	0x00920990	/* PIO3		addr	*/
+#undef	CFG_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO3_BITS	16		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO3_TYPE	1		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO4	0x009209a0	/* PIO4		addr	*/
+#undef	CFG_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO4_TYPE	0		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO5	0x009209b0	/* PIO5		addr	*/
+#define	CFG_NIOS_CPU_PIO5_IRQ	35		/*		IRQ	*/
+#define	CFG_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO5_TYPE	2		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO5_CAP	1		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO5_EDGE	3		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO5_ITYPE	2		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO6	0x009209c0	/* PIO6		addr	*/
+#undef	CFG_NIOS_CPU_PIO6_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO6_TYPE	1		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO6_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO6_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO6_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO7	0x009209d0	/* PIO7		addr	*/
+#undef	CFG_NIOS_CPU_PIO7_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO7_TYPE	1		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO7_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO7_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO7_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+/* IDE i/f */
+#define	CFG_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
+#define	CFG_NIOS_CPU_IDE0	0x00920a00	/* IDE0		addr	*/
+
+/* active serial memory i/f */
+#define	CFG_NIOS_CPU_ASMI_NUMS	1		/* number of ASMI	*/
+#define	CFG_NIOS_CPU_ASMI0	0x00920b00	/* ASMI0	addr	*/
+#define	CFG_NIOS_CPU_ASMI0_IRQ	45		/*		IRQ	*/
+
+/* memory accessibility */
+#define	CFG_NIOS_CPU_SRAM_BASE	0x00800000	/* board SRAM	addr	*/
+#define	CFG_NIOS_CPU_SRAM_SIZE	(1024 * 1024)	/*  1 MB	size	*/
+
+#define	CFG_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
+#define	CFG_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
+
+#define	CFG_NIOS_CPU_FLASH_BASE	0x00000000	/* board Flash	addr	*/
+#define	CFG_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
+
+/* LAN */
+#define	CFG_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
+
+#define	CFG_NIOS_CPU_LAN0_BASE	0x00910000	/* LAN0		addr	*/
+#define	CFG_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
+#define	CFG_NIOS_CPU_LAN0_IRQ	30		/*		IRQ	*/
+#define	CFG_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
+#define	CFG_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
+						/*	cs8900(1)	*/
+						/* ex:	alteramac(2)	*/
+
+/* symbolic redefinition (undef, if not present) */
+#define	CFG_NIOS_CPU_USER_TIMER		0	/* TIMER0: users choice	*/
+#define	CFG_NIOS_CPU_TICK_TIMER		1	/* TIMER1: tick (needed)*/
+
+#define	CFG_NIOS_CPU_BUTTON_PIO		0	/* PIO0: buttons	*/
+#define	CFG_NIOS_CPU_LCD_PIO		1	/* PIO1: ASCII LCD	*/
+#define	CFG_NIOS_CPU_LED_PIO		2	/* PIO2: LED bar	*/
+#define	CFG_NIOS_CPU_SEVENSEG_PIO	3	/* PIO3: 7-seg. display	*/
+#define	CFG_NIOS_CPU_RECONF_PIO		4	/* PIO4: reconf pin	*/
+#define	CFG_NIOS_CPU_CFPRESENT_PIO	5	/* PIO5: CF present IRQ	*/
+#define	CFG_NIOS_CPU_CFPOWER_PIO	6	/* PIO6: CF power/sw.	*/
+#define	CFG_NIOS_CPU_CFATASEL_PIO	7	/* PIO7: CF ATA select	*/
+
+#endif	/* __CONFIG_DK1C20_STANDARD_32_H */

include/configs/DK1S10.h

@@ -24,264 +24,19 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*
- * NIOS CPU configuration.
+/***********************************************************************
+ * Include the whole NIOS CPU configuration.
  *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
+ * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
  *
- *	#define	CFG_NIOS_CPU_ICACHE	4096
- *	#define	CFG_NIOS_CPU_DCACHE	0
- *	#define	CFG_NIOS_CPU_OCI_BASE	0
- *	#define	CFG_NIOS_CPU_OCI_SIZE	0
- */
+ ***********************************************************************/
 
 #if	defined(CONFIG_NIOS_SAFE_32)
-
-/* TODO */
-
+#include <configs/DK1S10_safe_32.h>
 #elif	defined(CONFIG_NIOS_STANDARD_32)
-
-/* CPU core */
-#define	CFG_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
-#define	CFG_NIOS_CPU_ICACHE	(4 * 1024)	/* instruction cache	*/
-#define	CFG_NIOS_CPU_DCACHE	(4 * 1024)	/* data cache		*/
-#define	CFG_NIOS_CPU_REG_NUMS	256		/* number of register	*/
-#define	CFG_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_STACK	0x008fff00	/* stack top	addr	*/
-#define	CFG_NIOS_CPU_VEC_BASE	0x008fff00	/* IRQ vectors	addr	*/
-#define	CFG_NIOS_CPU_VEC_SIZE	256		/*		size	*/
-#define	CFG_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
-#define	CFG_NIOS_CPU_RST_VECT	0x00920000	/* RESET vector	addr	*/
-#define	CFG_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
-						/*		yes(1)	*/
-
-/* on-chip extensions */
-#define	CFG_NIOS_CPU_RAM_BASE	0x00900000	/* on chip RAM	addr	*/
-#define	CFG_NIOS_CPU_RAM_SIZE	(64 * 1024)	/* 64 KB	size	*/
-
-#define	CFG_NIOS_CPU_ROM_BASE	0x00920000	/* on chip ROM	addr	*/
-#define	CFG_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
-
-#define	CFG_NIOS_CPU_OCI_BASE	0x00920800	/* OCI core	addr	*/
-#define	CFG_NIOS_CPU_OCI_SIZE	256		/*		size	*/
-
-/* timer */
-#define	CFG_NIOS_CPU_TIMER_NUMS	2		/* number of timer	*/
-
-#define	CFG_NIOS_CPU_TIMER0	0x00920940	/* TIMER0	addr	*/
-#define	CFG_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
-#define	CFG_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
-#define	CFG_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
-						/*		yes(1)	*/
-
-#define	CFG_NIOS_CPU_TIMER1	0x009209e0	/* TIMER1	addr	*/
-#define	CFG_NIOS_CPU_TIMER1_IRQ	50		/*		IRQ	*/
-#define	CFG_NIOS_CPU_TIMER1_PER	10000		/*  periode	usec	*/
-#define	CFG_NIOS_CPU_TIMER1_AR	1		/*  always run:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER1_FP	1		/*  fixed per:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER1_SS	0		/*  snaphot:	no(0)	*/
-						/*		yes(1)	*/
-
-/* serial i/o */
-#define	CFG_NIOS_CPU_UART_NUMS	1		/* number of uarts	*/
-
-#define	CFG_NIOS_CPU_UART0	0x00920900	/* UART0	addr	*/
-#define	CFG_NIOS_CPU_UART0_IRQ	25		/*		IRQ	*/
-#define	CFG_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
-#define	CFG_NIOS_CPU_UART0_DB	8		/*  data bit		*/
-#define	CFG_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
-#define	CFG_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
-						/*		odd(1)	*/
-						/*		even(2)	*/
-#define	CFG_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
-						/*		crts(1)	*/
-#define	CFG_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
-						/*		yes(1)	*/
-
-/* parallel i/o */
-#define	CFG_NIOS_CPU_PIO_NUMS	8		/* number of parports	*/
-
-#define	CFG_NIOS_CPU_PIO0	0x00920960	/* PIO0		addr	*/
-#define	CFG_NIOS_CPU_PIO0_IRQ	40		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO0_BITS	4		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO0_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO0_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO0_EDGE	3		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO0_ITYPE	2		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO1	0x00920970	/* PIO1		addr	*/
-#undef	CFG_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO1_BITS	11		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO2	0x00920980	/* PIO2		addr	*/
-#undef	CFG_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO2_BITS	8		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO2_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO3	0x00920990	/* PIO3		addr	*/
-#undef	CFG_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO3_BITS	16		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO3_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO4	0x009209a0	/* PIO4		addr	*/
-#undef	CFG_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO4_TYPE	0		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO5	0x009209b0	/* PIO5		addr	*/
-#define	CFG_NIOS_CPU_PIO5_IRQ	35		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO5_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO5_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO5_EDGE	3		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO5_ITYPE	2		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO6	0x009209c0	/* PIO6		addr	*/
-#undef	CFG_NIOS_CPU_PIO6_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO6_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO6_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO6_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO6_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CFG_NIOS_CPU_PIO7	0x009209d0	/* PIO7		addr	*/
-#undef	CFG_NIOS_CPU_PIO7_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO7_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO7_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO7_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO7_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-/* IDE i/f */
-#define	CFG_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
-#define	CFG_NIOS_CPU_IDE0	0x00920a00	/* IDE0		addr	*/
-
-/* active serial memory i/f */
-#define	CFG_NIOS_CPU_ASMI_NUMS	1		/* number of ASMI	*/
-#define	CFG_NIOS_CPU_ASMI0	0x00920b00	/* ASMI0	addr	*/
-#define	CFG_NIOS_CPU_ASMI0_IRQ	45		/*		IRQ	*/
-
-/* memory accessibility */
-#define	CFG_NIOS_CPU_SRAM_BASE	0x00800000	/* board SRAM	addr	*/
-#define	CFG_NIOS_CPU_SRAM_SIZE	(1024 * 1024)	/*  1 MB	size	*/
-
-#define	CFG_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
-#define	CFG_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
-
-#define	CFG_NIOS_CPU_FLASH_BASE	0x00000000	/* board Flash	addr	*/
-#define	CFG_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
-
-/* LAN */
-#define	CFG_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
-
-#define	CFG_NIOS_CPU_LAN0_BASE	0x00910000	/* LAN0		addr	*/
-#define	CFG_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
-#define	CFG_NIOS_CPU_LAN0_IRQ	30		/*		IRQ	*/
-#define	CFG_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
-#define	CFG_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
-						/*	cs8900(1)	*/
-						/* ex:	alteramac(2)	*/
-
-/* symbolic redefinition (undef, if not present) */
-#define	CFG_NIOS_CPU_USER_TIMER		0	/* TIMER0: users choice	*/
-#define	CFG_NIOS_CPU_TICK_TIMER		1	/* TIMER1: tick (needed)*/
-
-#define	CFG_NIOS_CPU_BUTTON_PIO		0	/* PIO0: buttons	*/
-#define	CFG_NIOS_CPU_LCD_PIO		1	/* PIO1: ASCII LCD	*/
-#define	CFG_NIOS_CPU_LED_PIO		2	/* PIO2: LED bar	*/
-#define	CFG_NIOS_CPU_SEVENSEG_PIO	3	/* PIO3: 7-seg. display	*/
-#define	CFG_NIOS_CPU_RECONF_PIO		4	/* PIO4: reconf pin	*/
-#define	CFG_NIOS_CPU_CFPRESENT_PIO	5	/* PIO5: CF present IRQ	*/
-#define	CFG_NIOS_CPU_CFPOWER_PIO	6	/* PIO6: CF power/sw.	*/
-#define	CFG_NIOS_CPU_CFATASEL_PIO	7	/* PIO7: CF ATA select	*/
-
+#include <configs/DK1S10_standard_32.h>
+#elif	defined(CONFIG_NIOS_MTX_LDK_20)
+#include <configs/DK1S10_mtx_ldk_20.h>
 #else
 #error *** CFG_ERROR: you have to setup right NIOS CPU configuration
 #endif
@@ -308,8 +63,18 @@
 #error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config
 #endif
 
-#define CFG_SRAM_BASE		CFG_NIOS_CPU_SRAM_BASE
-#define CFG_SRAM_SIZE		CFG_NIOS_CPU_SRAM_SIZE
+#if	defined(CFG_NIOS_CPU_SRAM_BASE) && defined(CFG_NIOS_CPU_SRAM_SIZE)
+
+#define	CFG_SRAM_BASE		CFG_NIOS_CPU_SRAM_BASE
+#define	CFG_SRAM_SIZE		CFG_NIOS_CPU_SRAM_SIZE
+
+#else
+
+#undef	CFG_SRAM_BASE
+#undef	CFG_SRAM_SIZE
+
+#endif
+
 #define CFG_VECT_BASE		CFG_NIOS_CPU_VEC_BASE
 
 /*------------------------------------------------------------------------
@@ -355,7 +120,15 @@
 #if	(CFG_NIOS_CPU_FLASH_SIZE != 0)
 
 #define	CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+
+#if	defined(CONFIG_NIOS_STANDARD_32)
 #define CFG_ENV_ADDR		CFG_FLASH_BASE	/* Mem addr of env	*/
+#elif	defined(CONFIG_NIOS_MTX_LDK_20)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#else
+#error *** CFG_ERROR: you have to setup the environment base address CFG_ENV_ADDR
+#endif
+
 #define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
 #define CONFIG_ENV_OVERWRITE			/* Serial/eth change Ok */
 
@@ -388,11 +161,18 @@
  * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc  PIT,
  * so an avalon bus timer is required.
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_TIMER_NUMS != 0)
+#if	(CFG_NIOS_CPU_TIMER_NUMS != 0) && defined(CFG_NIOS_CPU_TICK_TIMER)
 
 #if	(CFG_NIOS_CPU_TICK_TIMER == 0)
 
-#error *** CFG_ERROR: tick timer at TIMER0 not supported, expand your config.h
+#define CFG_NIOS_TMRBASE	CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick	*/
+#define CFG_NIOS_TMRIRQ		CFG_NIOS_CPU_TIMER0_IRQ
+
+#if	(CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
+#define CFG_NIOS_TMRMS		(CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
+#else
+#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ
+#endif
 
 #elif	(CFG_NIOS_CPU_TICK_TIMER == 1)
 
@@ -418,9 +198,6 @@
 
 #if	(CFG_NIOS_CPU_LAN0_TYPE == 0)		/* LAN91C111		*/
 
-	/****************************************************/
-	/* !!! LAN91C111 works for NIOS with patch only !!! */
-	/****************************************************/
 #define	CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
 #undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
 #define	CONFIG_SMC91111_BASE	(CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
@@ -463,7 +240,7 @@
 /*------------------------------------------------------------------------
  * STATUS LEDs
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_PIO_NUMS != 0)
+#if	(CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_LED_PIO)
 
 #if	(CFG_NIOS_CPU_LED_PIO == 0)
 
@@ -553,19 +330,19 @@
 /*------------------------------------------------------------------------
  * SEVEN SEGMENT LED DISPLAY
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_PIO_NUMS != 0)
+#if	(CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_SEVENSEG_PIO)
 
 #if	(CFG_NIOS_CPU_SEVENSEG_PIO == 0)
 
-#error *** CFG_ERROR: status LEDs at PIO0 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO0 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 1)
 
-#error *** CFG_ERROR: status LEDs at PIO1 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO1 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 2)
 
-#error *** CFG_ERROR: status LEDs at PIO2 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO2 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 3)
 
@@ -581,27 +358,27 @@
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 4)
 
-#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO4 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 5)
 
-#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO5 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 6)
 
-#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO6 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 7)
 
-#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO7 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 8)
 
-#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO8 not supported, expand your config.h
 
 #elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 9)
 
-#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+#error *** CFG_ERROR: seven segment display at PIO9 not supported, expand your config.h
 
 #else
 #error *** CFG_ERROR: you have to set CFG_NIOS_CPU_SEVENSEG_PIO in right case
@@ -692,17 +469,40 @@
 #define	CFG_MAXARGS		16	    /* max number of command args*/
 #define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
 
+/* Default load address	*/
 #if	(CFG_SRAM_SIZE != 0)
-#define	CFG_LOAD_ADDR		CFG_SRAM_BASE	/* Default load address	*/
+
+/* default in SRAM */
+#define	CFG_LOAD_ADDR		CFG_SRAM_BASE
+
+#elif	(CFG_SDRAM_SIZE != 0)
+
+/* default in SDRAM */
+#if	(CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
+#define	CFG_LOAD_ADDR		(CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
+#else
+#define	CFG_LOAD_ADDR		CFG_SDRAM_BASE
+#endif
+
 #else
-#undef	CFG_LOAD_ADDR
+#undef	CFG_LOAD_ADDR		/* force error break */
 #endif
 
+
+/* MEM test area */
 #if	(CFG_SDRAM_SIZE != 0)
-#define	CFG_MEMTEST_START	CFG_SDRAM_BASE	/* SDRAM til stack area */
-#define	CFG_MEMTEST_END		(CFG_INIT_SP - (1024 * 1024)) /* 1MB stack */
+
+/* SDRAM begin to stack area (1MB stack) */
+#if	(CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
+#define	CFG_MEMTEST_START	(CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
+#define	CFG_MEMTEST_END		(CFG_INIT_SP - (1024 * 1024))
+#else
+#define	CFG_MEMTEST_START	CFG_SDRAM_BASE
+#define	CFG_MEMTEST_END		(CFG_INIT_SP - (1024 * 1024))
+#endif
+
 #else
-#undef	CFG_MEMTEST_START
+#undef	CFG_MEMTEST_START	/* force error break */
 #undef	CFG_MEMTEST_END
 #endif
 

include/configs/DK1S10_mtx_ldk_20.h

@@ -0,0 +1,187 @@
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_DK1S10_MTX_LDK_20_H
+#define __CONFIG_DK1S10_MTX_LDK_20_H
+
+/*
+ * NIOS CPU configuration. (PART OF configs/DK1S10.h)
+ *
+ * Here we must define CPU dependencies. Any unsupported option have to
+ * be defined with zero, example CPU without data cache / OCI:
+ *
+ *	#define	CFG_NIOS_CPU_ICACHE	4096
+ *	#define	CFG_NIOS_CPU_DCACHE	0
+ *	#define	CFG_NIOS_CPU_OCI_BASE	0
+ *	#define	CFG_NIOS_CPU_OCI_SIZE	0
+ */
+
+/* CPU core */
+#define	CFG_NIOS_CPU_CLK	75000000	/* NIOS CPU clock	*/
+#define	CFG_NIOS_CPU_ICACHE	(0)		/* instruction cache	*/
+#define	CFG_NIOS_CPU_DCACHE	(0)		/* data cache		*/
+#define	CFG_NIOS_CPU_REG_NUMS	512		/* number of register	*/
+#define	CFG_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_STACK	0x02000000	/* stack top	addr	*/
+#define	CFG_NIOS_CPU_VEC_BASE	0x01000000	/* IRQ vectors	addr	*/
+#define	CFG_NIOS_CPU_VEC_SIZE	256		/*		size	*/
+#define	CFG_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
+#define	CFG_NIOS_CPU_RST_VECT	0x00000000	/* RESET vector	addr	*/
+#define	CFG_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
+						/*		yes(1)	*/
+
+/* The offset address in flash to check for the Nios signature "Ni".
+ * (see GM_FlashExec in germs_monitor.s) */
+#define	CFG_NIOS_CPU_EXES_OFFS	0x0C
+
+/* on-chip extensions */
+#undef	CFG_NIOS_CPU_RAM_BASE			/* on chip RAM	addr	*/
+#undef	CFG_NIOS_CPU_RAM_SIZE			/* 64 KB	size	*/
+
+#define	CFG_NIOS_CPU_ROM_BASE	0x00000000	/* on chip ROM	addr	*/
+#define	CFG_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
+
+#undef	CFG_NIOS_CPU_OCI_BASE			/* OCI core	addr	*/
+#undef	CFG_NIOS_CPU_OCI_SIZE			/*		size	*/
+
+/* timer */
+#define	CFG_NIOS_CPU_TIMER_NUMS	1		/* number of timer	*/
+
+#define	CFG_NIOS_CPU_TIMER0	0x00000840	/* TIMER0	addr	*/
+#define	CFG_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
+#define	CFG_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
+#define	CFG_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
+						/*		yes(1)	*/
+
+/* serial i/o */
+#define	CFG_NIOS_CPU_UART_NUMS	2		/* number of uarts	*/
+
+#define	CFG_NIOS_CPU_UART0	0x00000800	/* UART0	addr	*/
+#define	CFG_NIOS_CPU_UART0_IRQ	17		/*		IRQ	*/
+#define	CFG_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
+#define	CFG_NIOS_CPU_UART0_DB	8		/*  data bit		*/
+#define	CFG_NIOS_CPU_UART0_SB	2		/*  stop bit		*/
+#define	CFG_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
+						/*		odd(1)	*/
+						/*		even(2)	*/
+#define	CFG_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
+						/*		crts(1)	*/
+#define	CFG_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
+						/*		yes(1)	*/
+
+#define	CFG_NIOS_CPU_UART1	0x000008a0	/* UART1	addr	*/
+#define	CFG_NIOS_CPU_UART1_IRQ	18		/*		IRQ	*/
+#define	CFG_NIOS_CPU_UART1_BR	115200		/*  baudrate	var(0)	*/
+#define	CFG_NIOS_CPU_UART1_DB	8		/*  data bit		*/
+#define	CFG_NIOS_CPU_UART1_SB	1		/*  stop bit		*/
+#define	CFG_NIOS_CPU_UART1_PA	0		/*  parity	none(0)	*/
+						/*		odd(1)	*/
+						/*		even(2)	*/
+#define	CFG_NIOS_CPU_UART1_HS	0		/*  handshake:	no(0)	*/
+						/*		crts(1)	*/
+#define	CFG_NIOS_CPU_UART1_EOP	0		/*  eop reg:	no(0)	*/
+						/*		yes(1)	*/
+
+/* parallel i/o */
+#define	CFG_NIOS_CPU_PIO_NUMS	2		/* number of parports	*/
+
+#define	CFG_NIOS_CPU_PIO0	0x00000860	/* PIO0		addr	*/
+#undef	CFG_NIOS_CPU_PIO0_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO0_BITS	1		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO0_TYPE	1		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO0_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO0_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO0_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO1	0x00000870	/* PIO1		addr	*/
+#undef	CFG_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO1_BITS	4		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO1_TYPE	2		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+/* IDE i/f */
+#define	CFG_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
+#define	CFG_NIOS_CPU_IDE0	0x00000900	/* IDE0		addr	*/
+#define	CFG_NIOS_CPU_IDE0_IRQ	25		/* 		IRQ	*/
+
+/* memory accessibility */
+#undef	CFG_NIOS_CPU_SRAM_BASE			/* board SRAM	addr	*/
+#undef	CFG_NIOS_CPU_SRAM_SIZE			/*  1 MB	size	*/
+
+#define	CFG_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
+#define	CFG_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
+
+#define	CFG_NIOS_CPU_FLASH_BASE	0x00800000	/* board Flash	addr	*/
+#define	CFG_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
+
+/* LAN */
+#define	CFG_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
+
+#define	CFG_NIOS_CPU_LAN0_BASE	0x00010000	/* LAN0		addr	*/
+#define	CFG_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
+#define	CFG_NIOS_CPU_LAN0_IRQ	20		/*		IRQ	*/
+#define	CFG_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
+#define	CFG_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
+						/*	cs8900(1)	*/
+						/* ex:	openmac(2)	*/
+						/* ex:	alteramac(3)	*/
+
+/* symbolic redefinition (undef, if not present) */
+#define	CFG_NIOS_CPU_TICK_TIMER		0	/* TIMER0: tick (needed)*/
+#undef	CFG_NIOS_CPU_USER_TIMER			/* TIMERx: users choice	*/
+
+#define	CFG_NIOS_CPU_CFPOWER_PIO	0	/* PIO0: CF power/sw.	*/
+#define	CFG_NIOS_CPU_BUTTON_PIO		1	/* PIO1: buttons	*/
+#undef	CFG_NIOS_CPU_LCD_PIO			/* PIOx: ASCII LCD	*/
+#undef	CFG_NIOS_CPU_LED_PIO			/* PIOx: LED bar	*/
+#undef	CFG_NIOS_CPU_SEVENSEG_PIO		/* PIOx: 7-seg. display	*/
+#undef	CFG_NIOS_CPU_RECONF_PIO			/* PIOx: reconf pin	*/
+#undef	CFG_NIOS_CPU_CFPRESENT_PIO		/* PIOx: CF present IRQ	*/
+#undef	CFG_NIOS_CPU_CFATASEL_PIO		/* PIOx: CF ATA select	*/
+
+#endif	/* __CONFIG_DK1S10_MTX_LDK_20_H */

include/configs/DK1S10_safe_32.h

@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_DK1S10_SAFE_32_H
+#define __CONFIG_DK1S10_SAFE_32_H
+
+/*
+ * NIOS CPU configuration. (PART OF configs/DK1S10.h)
+ *
+ * !!! TODO !!! TODO !!!
+ */
+#error *** CFG_ERROR: DK1S10_safe_32 have to be defined (use DK1S10_standard_32 as template)
+
+#endif	/* __CONFIG_DK1S10_SAFE_32_H */

include/configs/DK1S10_standard_32.h

@@ -0,0 +1,274 @@
+/*
+ * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_DK1S10_STANDARD_32_H
+#define __CONFIG_DK1S10_STANDARD_32_H
+
+/*
+ * NIOS CPU configuration. (PART OF configs/DK1S10.h)
+ *
+ * Here we must define CPU dependencies. Any unsupported option have to
+ * be defined with zero, example CPU without data cache / OCI:
+ *
+ *	#define	CFG_NIOS_CPU_ICACHE	4096
+ *	#define	CFG_NIOS_CPU_DCACHE	0
+ *	#define	CFG_NIOS_CPU_OCI_BASE	0
+ *	#define	CFG_NIOS_CPU_OCI_SIZE	0
+ */
+
+/* CPU core */
+#define	CFG_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
+#define	CFG_NIOS_CPU_ICACHE	(4 * 1024)	/* instruction cache	*/
+#define	CFG_NIOS_CPU_DCACHE	(4 * 1024)	/* data cache		*/
+#define	CFG_NIOS_CPU_REG_NUMS	256		/* number of register	*/
+#define	CFG_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_STACK	0x008fff00	/* stack top	addr	*/
+#define	CFG_NIOS_CPU_VEC_BASE	0x008fff00	/* IRQ vectors	addr	*/
+#define	CFG_NIOS_CPU_VEC_SIZE	256		/*		size	*/
+#define	CFG_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
+#define	CFG_NIOS_CPU_RST_VECT	0x00920000	/* RESET vector	addr	*/
+#define	CFG_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
+						/*		yes(1)	*/
+
+/* on-chip extensions */
+#define	CFG_NIOS_CPU_RAM_BASE	0x00900000	/* on chip RAM	addr	*/
+#define	CFG_NIOS_CPU_RAM_SIZE	(64 * 1024)	/* 64 KB	size	*/
+
+#define	CFG_NIOS_CPU_ROM_BASE	0x00920000	/* on chip ROM	addr	*/
+#define	CFG_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
+
+#define	CFG_NIOS_CPU_OCI_BASE	0x00920800	/* OCI core	addr	*/
+#define	CFG_NIOS_CPU_OCI_SIZE	256		/*		size	*/
+
+/* timer */
+#define	CFG_NIOS_CPU_TIMER_NUMS	2		/* number of timer	*/
+
+#define	CFG_NIOS_CPU_TIMER0	0x00920940	/* TIMER0	addr	*/
+#define	CFG_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
+#define	CFG_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
+#define	CFG_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
+						/*		yes(1)	*/
+
+#define	CFG_NIOS_CPU_TIMER1	0x009209e0	/* TIMER1	addr	*/
+#define	CFG_NIOS_CPU_TIMER1_IRQ	50		/*		IRQ	*/
+#define	CFG_NIOS_CPU_TIMER1_PER	10000		/*  periode	usec	*/
+#define	CFG_NIOS_CPU_TIMER1_AR	1		/*  always run:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_TIMER1_FP	1		/*  fixed per:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_TIMER1_SS	0		/*  snaphot:	no(0)	*/
+						/*		yes(1)	*/
+
+/* serial i/o */
+#define	CFG_NIOS_CPU_UART_NUMS	1		/* number of uarts	*/
+
+#define	CFG_NIOS_CPU_UART0	0x00920900	/* UART0	addr	*/
+#define	CFG_NIOS_CPU_UART0_IRQ	25		/*		IRQ	*/
+#define	CFG_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
+#define	CFG_NIOS_CPU_UART0_DB	8		/*  data bit		*/
+#define	CFG_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
+#define	CFG_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
+						/*		odd(1)	*/
+						/*		even(2)	*/
+#define	CFG_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
+						/*		crts(1)	*/
+#define	CFG_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
+						/*		yes(1)	*/
+
+/* parallel i/o */
+#define	CFG_NIOS_CPU_PIO_NUMS	8		/* number of parports	*/
+
+#define	CFG_NIOS_CPU_PIO0	0x00920960	/* PIO0		addr	*/
+#define	CFG_NIOS_CPU_PIO0_IRQ	40		/*		IRQ	*/
+#define	CFG_NIOS_CPU_PIO0_BITS	4		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO0_TYPE	2		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO0_CAP	1		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO0_EDGE	3		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO0_ITYPE	2		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO1	0x00920970	/* PIO1		addr	*/
+#undef	CFG_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO1_BITS	11		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO2	0x00920980	/* PIO2		addr	*/
+#undef	CFG_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO2_BITS	8		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO2_TYPE	1		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO3	0x00920990	/* PIO3		addr	*/
+#undef	CFG_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO3_BITS	16		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO3_TYPE	1		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO4	0x009209a0	/* PIO4		addr	*/
+#undef	CFG_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO4_TYPE	0		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO5	0x009209b0	/* PIO5		addr	*/
+#define	CFG_NIOS_CPU_PIO5_IRQ	35		/*		IRQ	*/
+#define	CFG_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO5_TYPE	2		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO5_CAP	1		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO5_EDGE	3		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO5_ITYPE	2		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO6	0x009209c0	/* PIO6		addr	*/
+#undef	CFG_NIOS_CPU_PIO6_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO6_TYPE	1		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO6_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO6_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO6_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+#define	CFG_NIOS_CPU_PIO7	0x009209d0	/* PIO7		addr	*/
+#undef	CFG_NIOS_CPU_PIO7_IRQ			/*		w/o IRQ	*/
+#define	CFG_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
+#define	CFG_NIOS_CPU_PIO7_TYPE	1		/*  io type:	tris(0)	*/
+						/*		out(1)	*/
+						/*		in(2)	*/
+#define	CFG_NIOS_CPU_PIO7_CAP	0		/*  capture:	no(0)	*/
+						/*		yes(1)	*/
+#define	CFG_NIOS_CPU_PIO7_EDGE	0		/*  edge type:	none(0)	*/
+						/*		fall(1)	*/
+						/*		rise(2)	*/
+						/*		any(3)	*/
+#define	CFG_NIOS_CPU_PIO7_ITYPE	0		/*  IRQ type:	none(0)	*/
+						/*		level(1)*/
+						/*		edge(2)	*/
+
+/* IDE i/f */
+#define	CFG_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
+#define	CFG_NIOS_CPU_IDE0	0x00920a00	/* IDE0		addr	*/
+
+/* memory accessibility */
+#define	CFG_NIOS_CPU_SRAM_BASE	0x00800000	/* board SRAM	addr	*/
+#define	CFG_NIOS_CPU_SRAM_SIZE	(1024 * 1024)	/*  1 MB	size	*/
+
+#define	CFG_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
+#define	CFG_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
+
+#define	CFG_NIOS_CPU_FLASH_BASE	0x00000000	/* board Flash	addr	*/
+#define	CFG_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
+
+/* LAN */
+#define	CFG_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
+
+#define	CFG_NIOS_CPU_LAN0_BASE	0x00910000	/* LAN0		addr	*/
+#define	CFG_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
+#define	CFG_NIOS_CPU_LAN0_IRQ	30		/*		IRQ	*/
+#define	CFG_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
+#define	CFG_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
+						/*	cs8900(1)	*/
+						/* ex:	alteramac(2)	*/
+
+/* symbolic redefinition (undef, if not present) */
+#define	CFG_NIOS_CPU_USER_TIMER		0	/* TIMER0: users choice	*/
+#define	CFG_NIOS_CPU_TICK_TIMER		1	/* TIMER1: tick (needed)*/
+
+#define	CFG_NIOS_CPU_BUTTON_PIO		0	/* PIO0: buttons	*/
+#define	CFG_NIOS_CPU_LCD_PIO		1	/* PIO1: ASCII LCD	*/
+#define	CFG_NIOS_CPU_LED_PIO		2	/* PIO2: LED bar	*/
+#define	CFG_NIOS_CPU_SEVENSEG_PIO	3	/* PIO3: 7-seg. display	*/
+#define	CFG_NIOS_CPU_RECONF_PIO		4	/* PIO4: reconf pin	*/
+#define	CFG_NIOS_CPU_CFPRESENT_PIO	5	/* PIO5: CF present IRQ	*/
+#define	CFG_NIOS_CPU_CFPOWER_PIO	6	/* PIO6: CF power/sw.	*/
+#define	CFG_NIOS_CPU_CFATASEL_PIO	7	/* PIO7: CF ATA select	*/
+
+#endif	/* __CONFIG_DK1S10_STANDARD_32_H */

include/nios-io.h

@@ -117,7 +117,7 @@ typedef volatile struct nios_spi_t {
 	unsigned	status;		/* Status reg */
 	unsigned	control;	/* Control reg */
 	unsigned	reserved;	/* (master only) */
-	unsigned	slaveselect;	/* SPI slave selct mask (master only) */
+	unsigned	slaveselect;	/* SPI slave select mask (master only) */
 }nios_spi_t;
 
 /* status register */

lib_nios/board.c

@@ -132,8 +132,10 @@ void board_init (void)
 	bd->bi_memstart	= CFG_SDRAM_BASE;
 	bd->bi_memsize = CFG_SDRAM_SIZE;
 	bd->bi_flashstart = CFG_FLASH_BASE;
+#if	defined(CFG_SRAM_BASE) && defined(CFG_SRAM_SIZE)
 	bd->bi_sramstart= CFG_SRAM_BASE;
 	bd->bi_sramsize	= CFG_SRAM_SIZE;
+#endif
 	bd->bi_baudrate	= CONFIG_BAUDRATE;
 
 	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {

rtc/ds1306.c

@@ -1,6 +1,9 @@
 /*
  * (C) Copyright 2002 SIXNET, dge@sixnetio.com.
  *
+ * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -21,20 +24,66 @@
  */
 
 /*
- * Date & Time support for DS1306 RTC using software SPI
+ * Date & Time support for DS1306 RTC using SPI:
+ *
+ *    - SXNI855T:    it uses its own soft SPI here in this file
+ *    - all other:   use the external spi_xfer() function
+ *                   (see include/spi.h)
  */
 
 #include <common.h>
 #include <command.h>
 #include <rtc.h>
+#include <spi.h>
 
 #if defined(CONFIG_RTC_DS1306) && (CONFIG_COMMANDS & CFG_CMD_DATE)
 
-static unsigned int bin2bcd(unsigned int n);
-static unsigned char bcd2bin(unsigned char c);
-static void soft_spi_send(unsigned char n);
-static unsigned char soft_spi_read(void);
-static void init_spi(void);
+#define	RTC_SECONDS		0x00
+#define	RTC_MINUTES		0x01
+#define	RTC_HOURS		0x02
+#define	RTC_DAY_OF_WEEK		0x03
+#define	RTC_DATE_OF_MONTH	0x04
+#define	RTC_MONTH		0x05
+#define	RTC_YEAR		0x06
+
+#define	RTC_SECONDS_ALARM0	0x07
+#define	RTC_MINUTES_ALARM0	0x08
+#define	RTC_HOURS_ALARM0	0x09
+#define	RTC_DAY_OF_WEEK_ALARM0	0x0a
+
+#define	RTC_SECONDS_ALARM1	0x0b
+#define	RTC_MINUTES_ALARM1	0x0c
+#define	RTC_HOURS_ALARM1	0x0d
+#define	RTC_DAY_OF_WEEK_ALARM1	0x0e
+
+#define	RTC_CONTROL		0x0f
+#define	RTC_STATUS		0x10
+#define	RTC_TRICKLE_CHARGER	0x11
+
+#define	RTC_USER_RAM_BASE	0x20
+
+/*
+ * External table of chip select functions (see the appropriate board
+ * support for the actual definition of the table).
+ */
+extern spi_chipsel_type spi_chipsel[];
+extern int spi_chipsel_cnt;
+
+static unsigned int bin2bcd (unsigned int n);
+static unsigned char bcd2bin (unsigned char c);
+static unsigned char rtc_read (unsigned char reg);
+static void rtc_write (unsigned char reg, unsigned char val);
+
+
+
+
+
+/* ************************************************************************* */
+#ifdef CONFIG_SXNI855T		/* !!! SHOULD BE CHANGED TO NEW CODE !!! */
+
+static void soft_spi_send (unsigned char n);
+static unsigned char soft_spi_read (void);
+static void init_spi (void);
 
 /*-----------------------------------------------------------------------
  * Definitions
@@ -48,227 +97,349 @@ static void init_spi(void);
 /* ------------------------------------------------------------------------- */
 
 /* read clock time from DS1306 and return it in *tmp */
-void rtc_get(struct rtc_time *tmp)
+void rtc_get (struct rtc_time *tmp)
 {
-    volatile immap_t *immap = (immap_t *)CFG_IMMR;
-    unsigned char spi_byte;	/* Data Byte */
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	unsigned char spi_byte;	/* Data Byte */
+
+	init_spi ();		/* set port B for software SPI */
+
+	/* Now we can enable the DS1306 RTC */
+	immap->im_cpm.cp_pbdat |= PB_SPI_CE;
+	udelay (10);
+
+	/* Shift out the address (0) of the time in the Clock Chip */
+	soft_spi_send (0);
+
+	/* Put the clock readings into the rtc_time structure */
+	tmp->tm_sec = bcd2bin (soft_spi_read ());	/* Read seconds */
+	tmp->tm_min = bcd2bin (soft_spi_read ());	/* Read minutes */
+
+	/* Hours are trickier */
+	spi_byte = soft_spi_read ();	/* Read Hours into temporary value */
+	if (spi_byte & 0x40) {
+		/* 12 hour mode bit is set (time is in 1-12 format) */
+		if (spi_byte & 0x20) {
+			/* since PM we add 11 to get 0-23 for hours */
+			tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) + 11;
+		} else {
+			/* since AM we subtract 1 to get 0-23 for hours */
+			tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) - 1;
+		}
+	} else {
+		/* Otherwise, 0-23 hour format */
+		tmp->tm_hour = (bcd2bin (spi_byte & 0x3F));
+	}
 
-    init_spi();		/* set port B for software SPI */
+	soft_spi_read ();	/* Read and discard Day of week */
+	tmp->tm_mday = bcd2bin (soft_spi_read ());	/* Read Day of the Month */
+	tmp->tm_mon = bcd2bin (soft_spi_read ());	/* Read Month */
 
-    /* Now we can enable the DS1306 RTC */
-    immap->im_cpm.cp_pbdat |= PB_SPI_CE;
-    udelay(10);
+	/* Read Year and convert to this century */
+	tmp->tm_year = bcd2bin (soft_spi_read ()) + 2000;
 
-    /* Shift out the address (0) of the time in the Clock Chip */
-    soft_spi_send(0);
+	/* Now we can disable the DS1306 RTC */
+	immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;	/* Disable DS1306 Chip */
+	udelay (10);
 
-    /* Put the clock readings into the rtc_time structure */
-    tmp->tm_sec = bcd2bin(soft_spi_read());	/* Read seconds */
-    tmp->tm_min = bcd2bin(soft_spi_read());	/* Read minutes */
+	GregorianDay (tmp);	/* Determine the day of week */
 
-    /* Hours are trickier */
-    spi_byte = soft_spi_read();	/* Read Hours into temporary value */
-    if (spi_byte & 0x40) {
-	/* 12 hour mode bit is set (time is in 1-12 format) */
-	if (spi_byte & 0x20) {
-	    /* since PM we add 11 to get 0-23 for hours */
-	    tmp->tm_hour = (bcd2bin(spi_byte & 0x1F)) + 11;
-	}
-	else {
-	    /* since AM we subtract 1 to get 0-23 for hours */
-	    tmp->tm_hour = (bcd2bin(spi_byte & 0x1F)) - 1;
+	debug ("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	       tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+	       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* set clock time in DS1306 RTC and in MPC8xx RTC */
+void rtc_set (struct rtc_time *tmp)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+	init_spi ();		/* set port B for software SPI */
+
+	/* Now we can enable the DS1306 RTC */
+	immap->im_cpm.cp_pbdat |= PB_SPI_CE;	/* Enable DS1306 Chip */
+	udelay (10);
+
+	/* First disable write protect in the clock chip control register */
+	soft_spi_send (0x8F);	/* send address of the control register */
+	soft_spi_send (0x00);	/* send control register contents */
+
+	/* Now disable the DS1306 to terminate the write */
+	immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;
+	udelay (10);
+
+	/* Now enable the DS1306 to initiate a new write */
+	immap->im_cpm.cp_pbdat |= PB_SPI_CE;
+	udelay (10);
+
+	/* Next, send the address of the clock time write registers */
+	soft_spi_send (0x80);	/* send address of the first time register */
+
+	/* Use Burst Mode to send all of the time data to the clock */
+	bin2bcd (tmp->tm_sec);
+	soft_spi_send (bin2bcd (tmp->tm_sec));	/* Send Seconds */
+	soft_spi_send (bin2bcd (tmp->tm_min));	/* Send Minutes */
+	soft_spi_send (bin2bcd (tmp->tm_hour));	/* Send Hour */
+	soft_spi_send (bin2bcd (tmp->tm_wday));	/* Send Day of the Week */
+	soft_spi_send (bin2bcd (tmp->tm_mday));	/* Send Day of Month */
+	soft_spi_send (bin2bcd (tmp->tm_mon));	/* Send Month */
+	soft_spi_send (bin2bcd (tmp->tm_year - 2000));	/* Send Year */
+
+	/* Now we can disable the Clock chip to terminate the burst write */
+	immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;	/* Disable DS1306 Chip */
+	udelay (10);
+
+	/* Now we can enable the Clock chip to initiate a new write */
+	immap->im_cpm.cp_pbdat |= PB_SPI_CE;	/* Enable DS1306 Chip */
+	udelay (10);
+
+	/* First we Enable write protect in the clock chip control register */
+	soft_spi_send (0x8F);	/* send address of the control register */
+	soft_spi_send (0x40);	/* send out Control Register contents */
+
+	/* Now disable the DS1306 */
+	immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;	/*  Disable DS1306 Chip */
+	udelay (10);
+
+	/* Set standard MPC8xx clock to the same time so Linux will
+	 * see the time even if it doesn't have a DS1306 clock driver.
+	 * This helps with experimenting with standard kernels.
+	 */
+	{
+		ulong tim;
+
+		tim = mktime (tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
+			      tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+		immap->im_sitk.sitk_rtck = KAPWR_KEY;
+		immap->im_sit.sit_rtc = tim;
 	}
-    }
-    else {
-	/* Otherwise, 0-23 hour format */
-	tmp->tm_hour = (bcd2bin(spi_byte & 0x3F));
-    }
 
-    soft_spi_read();		/* Read and discard Day of week */
-    tmp->tm_mday = bcd2bin(soft_spi_read());	/* Read Day of the Month */
-    tmp->tm_mon = bcd2bin(soft_spi_read());	/* Read Month */
+	debug ("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	       tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+	       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+}
 
-    /* Read Year and convert to this century */
-    tmp->tm_year = bcd2bin(soft_spi_read()) + 2000;
+/* ------------------------------------------------------------------------- */
 
-    /* Now we can disable the DS1306 RTC */
-    immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;	/* Disable DS1306 Chip */
-    udelay(10);
+/* Initialize Port B for software SPI */
+static void init_spi (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 
-    GregorianDay(tmp);		/* Determine the day of week */
+	/* Force output pins to begin at logic 0 */
+	immap->im_cpm.cp_pbdat &= ~(PB_SPI_CE | PB_SPIMOSI | PB_SPISCK);
 
-    debug("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-	  tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-	  tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+	/* Set these 3 signals as outputs */
+	immap->im_cpm.cp_pbdir |= (PB_SPIMOSI | PB_SPI_CE | PB_SPISCK);
+
+	immap->im_cpm.cp_pbdir &= ~PB_SPIMISO;	/* Make MISO pin an input */
+	udelay (10);
 }
 
 /* ------------------------------------------------------------------------- */
 
-/* set clock time in DS1306 RTC and in MPC8xx RTC */
-void rtc_set(struct rtc_time *tmp)
+/* NOTE: soft_spi_send() assumes that the I/O lines are configured already */
+static void soft_spi_send (unsigned char n)
 {
-    volatile immap_t *immap = (immap_t *)CFG_IMMR;
-
-    init_spi();		/* set port B for software SPI */
-
-    /* Now we can enable the DS1306 RTC */
-    immap->im_cpm.cp_pbdat |= PB_SPI_CE;	/* Enable DS1306 Chip */
-    udelay(10);
-
-    /* First disable write protect in the clock chip control register */
-    soft_spi_send(0x8F);	/* send address of the control register */
-    soft_spi_send(0x00);	/* send control register contents */
-
-    /* Now disable the DS1306 to terminate the write */
-    immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;
-    udelay(10);
-
-    /* Now enable the DS1306 to initiate a new write */
-    immap->im_cpm.cp_pbdat |= PB_SPI_CE;
-    udelay(10);
-
-    /* Next, send the address of the clock time write registers */
-    soft_spi_send(0x80);	/* send address of the first time register */
-
-    /* Use Burst Mode to send all of the time data to the clock */
-    bin2bcd(tmp->tm_sec);
-    soft_spi_send(bin2bcd(tmp->tm_sec));	/* Send Seconds */
-    soft_spi_send(bin2bcd(tmp->tm_min));	/* Send Minutes */
-    soft_spi_send(bin2bcd(tmp->tm_hour));	/* Send Hour */
-    soft_spi_send(bin2bcd(tmp->tm_wday));	/* Send Day of the Week */
-    soft_spi_send(bin2bcd(tmp->tm_mday));	/* Send Day of Month */
-    soft_spi_send(bin2bcd(tmp->tm_mon));	/* Send Month */
-    soft_spi_send(bin2bcd(tmp->tm_year - 2000));	/* Send Year */
-
-    /* Now we can disable the Clock chip to terminate the burst write */
-    immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;	/* Disable DS1306 Chip */
-    udelay(10);
-
-    /* Now we can enable the Clock chip to initiate a new write */
-    immap->im_cpm.cp_pbdat |= PB_SPI_CE;	/* Enable DS1306 Chip */
-    udelay(10);
-
-    /* First we Enable write protect in the clock chip control register */
-    soft_spi_send(0x8F);	/* send address of the control register */
-    soft_spi_send(0x40);	/* send out Control Register contents */
-
-    /* Now disable the DS1306 */
-    immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;	/*  Disable DS1306 Chip */
-    udelay(10);
-
-    /* Set standard MPC8xx clock to the same time so Linux will
-     * see the time even if it doesn't have a DS1306 clock driver.
-     * This helps with experimenting with standard kernels.
-     */
-    {
-	ulong tim;
-
-	tim = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
-		     tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
-	immap->im_sitk.sitk_rtck = KAPWR_KEY;
-	immap->im_sit.sit_rtc = tim;
-    }
-
-    debug("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-	  tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-	  tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	unsigned char bitpos;	/* bit position to receive */
+	unsigned char i;	/* Loop Control */
+
+	/* bit position to send, start with most significant bit */
+	bitpos = 0x80;
+
+	/* Send 8 bits to software SPI */
+	for (i = 0; i < 8; i++) {	/* Loop for 8 bits */
+		immap->im_cpm.cp_pbdat |= PB_SPISCK;	/* Raise SCK */
+
+		if (n & bitpos)
+			immap->im_cpm.cp_pbdat |= PB_SPIMOSI;	/* Set MOSI to 1 */
+		else
+			immap->im_cpm.cp_pbdat &= ~PB_SPIMOSI;	/* Set MOSI to 0 */
+		udelay (10);
+
+		immap->im_cpm.cp_pbdat &= ~PB_SPISCK;	/* Lower SCK */
+		udelay (10);
+
+		bitpos >>= 1;	/* Shift for next bit position */
+	}
 }
 
 /* ------------------------------------------------------------------------- */
 
-void rtc_reset(void)
+/* NOTE: soft_spi_read() assumes that the I/O lines are configured already */
+static unsigned char soft_spi_read (void)
 {
-    return;			/* nothing to do */
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+	unsigned char spi_byte = 0;	/* Return value, assume success */
+	unsigned char bitpos;	/* bit position to receive */
+	unsigned char i;	/* Loop Control */
+
+	/* bit position to receive, start with most significant bit */
+	bitpos = 0x80;
+
+	/* Read 8 bits here */
+	for (i = 0; i < 8; i++) {	/* Do 8 bits in loop */
+		immap->im_cpm.cp_pbdat |= PB_SPISCK;	/* Raise SCK */
+		udelay (10);
+		if (immap->im_cpm.cp_pbdat & PB_SPIMISO)	/* Get a bit of data */
+			spi_byte |= bitpos;	/* Set data accordingly */
+		immap->im_cpm.cp_pbdat &= ~PB_SPISCK;	/* Lower SCK */
+		udelay (10);
+		bitpos >>= 1;	/* Shift for next bit position */
+	}
+
+	return spi_byte;	/* Return the byte read */
 }
 
 /* ------------------------------------------------------------------------- */
 
-static unsigned char bcd2bin(unsigned char n)
+void rtc_reset (void)
 {
-    return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
+	return;			/* nothing to do */
+}
+
+#else  /* not CONFIG_SXNI855T */
+/* ************************************************************************* */
+
+
+
+
+
+/* read clock time from DS1306 and return it in *tmp */
+void rtc_get (struct rtc_time *tmp)
+{
+	unsigned char sec, min, hour, mday, wday, mon, year;
+
+	sec = rtc_read (RTC_SECONDS);
+	min = rtc_read (RTC_MINUTES);
+	hour = rtc_read (RTC_HOURS);
+	mday = rtc_read (RTC_DATE_OF_MONTH);
+	wday = rtc_read (RTC_DAY_OF_WEEK);
+	mon = rtc_read (RTC_MONTH);
+	year = rtc_read (RTC_YEAR);
+
+	debug ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
+	       "hr: %02x min: %02x sec: %02x\n",
+	       year, mon, mday, wday, hour, min, sec);
+	debug ("Alarms[0]: wday: %02x hour: %02x min: %02x sec: %02x\n",
+	       rtc_read (RTC_DAY_OF_WEEK_ALARM0),
+	       rtc_read (RTC_HOURS_ALARM0),
+	       rtc_read (RTC_MINUTES_ALARM0), rtc_read (RTC_SECONDS_ALARM0));
+	debug ("Alarms[1]: wday: %02x hour: %02x min: %02x sec: %02x\n",
+	       rtc_read (RTC_DAY_OF_WEEK_ALARM1),
+	       rtc_read (RTC_HOURS_ALARM1),
+	       rtc_read (RTC_MINUTES_ALARM1), rtc_read (RTC_SECONDS_ALARM1));
+
+	tmp->tm_sec = bcd2bin (sec & 0x7F);	/* convert Seconds */
+	tmp->tm_min = bcd2bin (min & 0x7F);	/* convert Minutes */
+
+	/* convert Hours */
+	tmp->tm_hour = (hour & 0x40)
+		? ((hour & 0x20)	/* 12 hour mode */
+		   ? bcd2bin (hour & 0x1F) + 11	/* PM */
+		   : bcd2bin (hour & 0x1F) - 1	/* AM */
+		)
+		: bcd2bin (hour & 0x3F);	/* 24 hour mode */
+
+	tmp->tm_mday = bcd2bin (mday & 0x3F);	/* convert Day of the Month */
+	tmp->tm_mon = bcd2bin (mon & 0x1F);	/* convert Month */
+	tmp->tm_year = bcd2bin (year) + 2000;	/* convert Year */
+	tmp->tm_wday = bcd2bin (wday & 0x07) - 1;	/* convert Day of the Week */
+	tmp->tm_yday = 0;
+	tmp->tm_isdst = 0;
+
+	debug ("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	       tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+	       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
 }
 
 /* ------------------------------------------------------------------------- */
 
-static unsigned int bin2bcd(unsigned int n)
+/* set clock time from *tmp in DS1306 RTC */
+void rtc_set (struct rtc_time *tmp)
 {
-    return (((n / 10) << 4) | (n % 10));
+	debug ("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	       tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+	       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+	rtc_write (RTC_YEAR, bin2bcd (tmp->tm_year - 2000));
+	rtc_write (RTC_MONTH, bin2bcd (tmp->tm_mon));
+	rtc_write (RTC_DATE_OF_MONTH, bin2bcd (tmp->tm_mday));
+	rtc_write (RTC_DAY_OF_WEEK, bin2bcd (tmp->tm_wday + 1));
+	rtc_write (RTC_HOURS, bin2bcd (tmp->tm_hour));
+	rtc_write (RTC_MINUTES, bin2bcd (tmp->tm_min));
+	rtc_write (RTC_SECONDS, bin2bcd (tmp->tm_sec));
 }
 
 /* ------------------------------------------------------------------------- */
 
-/* Initialize Port B for software SPI */
-static void init_spi(void) {
-    volatile immap_t *immap = (immap_t *)CFG_IMMR;
+/* reset the DS1306 */
+void rtc_reset (void)
+{
+	/* clear the control register */
+	rtc_write (RTC_CONTROL, 0x00);	/* 1st step: reset WP */
+	rtc_write (RTC_CONTROL, 0x00);	/* 2nd step: reset 1Hz, AIE1, AIE0 */
+
+	/* reset all alarms */
+	rtc_write (RTC_SECONDS_ALARM0, 0x00);
+	rtc_write (RTC_SECONDS_ALARM1, 0x00);
+	rtc_write (RTC_MINUTES_ALARM0, 0x00);
+	rtc_write (RTC_MINUTES_ALARM1, 0x00);
+	rtc_write (RTC_HOURS_ALARM0, 0x00);
+	rtc_write (RTC_HOURS_ALARM1, 0x00);
+	rtc_write (RTC_DAY_OF_WEEK_ALARM0, 0x00);
+	rtc_write (RTC_DAY_OF_WEEK_ALARM1, 0x00);
+}
+
+/* ------------------------------------------------------------------------- */
 
-    /* Force output pins to begin at logic 0 */
-    immap->im_cpm.cp_pbdat &= ~(PB_SPI_CE | PB_SPIMOSI | PB_SPISCK);
+static unsigned char rtc_read (unsigned char reg)
+{
+	unsigned char dout[2];	/* SPI Output Data Bytes */
+	unsigned char din[2];	/* SPI Input Data Bytes */
 
-    /* Set these 3 signals as outputs */
-    immap->im_cpm.cp_pbdir |= (PB_SPIMOSI | PB_SPI_CE | PB_SPISCK);
+	dout[0] = reg;
 
-    immap->im_cpm.cp_pbdir &= ~PB_SPIMISO;	/* Make MISO pin an input */
-    udelay(10);
+	if (spi_xfer (spi_chipsel[CFG_SPI_RTC_DEVID], 16, dout, din) != 0) {
+		return 0;
+	} else {
+		return din[1];
+	}
 }
 
 /* ------------------------------------------------------------------------- */
 
-/* NOTE: soft_spi_send() assumes that the I/O lines are configured already */
-static void soft_spi_send(unsigned char n)
+static void rtc_write (unsigned char reg, unsigned char val)
 {
-    volatile immap_t *immap = (immap_t *)CFG_IMMR;
-    unsigned char bitpos;	/* bit position to receive */
-    unsigned char i;		/* Loop Control */
+	unsigned char dout[2];	/* SPI Output Data Bytes */
+	unsigned char din[2];	/* SPI Input Data Bytes */
 
-    /* bit position to send, start with most significant bit */
-    bitpos = 0x80;
+	dout[0] = 0x80 | reg;
+	dout[1] = val;
 
-    /* Send 8 bits to software SPI */
-    for (i = 0; i < 8; i++) {	/* Loop for 8 bits */
-	immap->im_cpm.cp_pbdat |= PB_SPISCK;	/* Raise SCK */
+	spi_xfer (spi_chipsel[CFG_SPI_RTC_DEVID], 16, dout, din);
+}
 
-	if (n & bitpos)
-	    immap->im_cpm.cp_pbdat |= PB_SPIMOSI;	/* Set MOSI to 1 */
-	else
-	    immap->im_cpm.cp_pbdat &= ~PB_SPIMOSI;	/* Set MOSI to 0 */
-	udelay(10);
+#endif /* end of code exclusion (see #ifdef CONFIG_SXNI855T above) */
 
-	immap->im_cpm.cp_pbdat &= ~PB_SPISCK;	/* Lower SCK */
-	udelay(10);
+/* ------------------------------------------------------------------------- */
 
-	bitpos >>= 1;		/* Shift for next bit position */
-    }
+static unsigned char bcd2bin (unsigned char n)
+{
+	return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
 }
 
 /* ------------------------------------------------------------------------- */
 
-/* NOTE: soft_spi_read() assumes that the I/O lines are configured already */
-static unsigned char soft_spi_read(void)
+static unsigned int bin2bcd (unsigned int n)
 {
-    volatile immap_t *immap = (immap_t *)CFG_IMMR;
-
-    unsigned char spi_byte = 0;	/* Return value, assume success */
-    unsigned char bitpos;	/* bit position to receive */
-    unsigned char i;		/* Loop Control */
-
-    /* bit position to receive, start with most significant bit */
-    bitpos = 0x80;
-
-    /* Read 8 bits here */
-    for (i = 0; i < 8; i++) {	/* Do 8 bits in loop */
-	immap->im_cpm.cp_pbdat |= PB_SPISCK;	/* Raise SCK */
-	udelay(10);
-	if (immap->im_cpm.cp_pbdat & PB_SPIMISO)	/* Get a bit of data */
-	    spi_byte |= bitpos;	/* Set data accordingly */
-	immap->im_cpm.cp_pbdat &= ~PB_SPISCK;	/* Lower SCK */
-	udelay(10);
-	bitpos >>= 1;		/* Shift for next bit position */
-    }
-
-    return spi_byte;		/* Return the byte read */
+	return (((n / 10) << 4) | (n % 10));
 }
-
 /* ------------------------------------------------------------------------- */
 
 #endif