mpc85xx: Fix SERDES/eTSEC message indentation

Previously some mpc85xx boards printed indented messages such as the
following on bootup:
  printf("    eTSEC4 is in sgmii mode.\n");
  printf("    Serdes2 disalbed\n");

The bootup appearance looks cleaner if the indentation is removed which
aligns these messages with other bootup output.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
CC: galak@kernel.crashing.org

board/atum8548/atum8548.c

@@ -193,13 +193,13 @@ void pci_init_board(void)
 
 	if (io_sel & 1) {
 		if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
-			printf ("    eTSEC1 is in sgmii mode.\n");
+			printf("eTSEC1 is in sgmii mode.\n");
 		if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
-			printf ("    eTSEC2 is in sgmii mode.\n");
+			printf("eTSEC2 is in sgmii mode.\n");
 		if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
-			printf ("    eTSEC3 is in sgmii mode.\n");
+			printf("eTSEC3 is in sgmii mode.\n");
 		if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
-			printf ("    eTSEC4 is in sgmii mode.\n");
+			printf("eTSEC4 is in sgmii mode.\n");
 	}
 
 #ifdef CONFIG_PCIE1

board/freescale/mpc8536ds/mpc8536ds.c

@@ -211,12 +211,12 @@ void pci_init_board(void)
 		devdisr, sdrs2_io_sel, io_sel);
 
 	if (sdrs2_io_sel == 7)
-		printf("    Serdes2 disalbed\n");
+		printf("Serdes2 disalbed\n");
 	else if (sdrs2_io_sel == 4) {
-		printf("    eTSEC1 is in sgmii mode.\n");
-		printf("    eTSEC3 is in sgmii mode.\n");
+		printf("eTSEC1 is in sgmii mode.\n");
+		printf("eTSEC3 is in sgmii mode.\n");
 	} else if (sdrs2_io_sel == 6)
-		printf("    eTSEC1 is in sgmii mode.\n");
+		printf("eTSEC1 is in sgmii mode.\n");
 
 	puts("\n");
 #ifdef CONFIG_PCIE3

board/freescale/mpc8544ds/mpc8544ds.c

@@ -120,9 +120,9 @@ void pci_init_board(void)
 
 	if (io_sel & 1) {
 		if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
-			printf ("    eTSEC1 is in sgmii mode.\n");
+			printf("eTSEC1 is in sgmii mode.\n");
 		if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
-			printf ("    eTSEC3 is in sgmii mode.\n");
+			printf("eTSEC3 is in sgmii mode.\n");
 	}
 	puts("\n");
 

board/freescale/mpc8572ds/mpc8572ds.c

@@ -177,13 +177,13 @@ void pci_init_board(void)
 	debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
 
 	if (!(pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
-		printf ("    eTSEC1 is in sgmii mode.\n");
+		printf("eTSEC1 is in sgmii mode.\n");
 	if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
-		printf ("    eTSEC2 is in sgmii mode.\n");
+		printf("eTSEC2 is in sgmii mode.\n");
 	if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
-		printf ("    eTSEC3 is in sgmii mode.\n");
+		printf("eTSEC3 is in sgmii mode.\n");
 	if (!(pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
-		printf ("    eTSEC4 is in sgmii mode.\n");
+		printf("eTSEC4 is in sgmii mode.\n");
 
 	puts("\n");
 #ifdef CONFIG_PCIE3

board/freescale/p1_p2_rdb/pci.c

@@ -56,7 +56,7 @@ void pci_init_board(void)
 	debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
 
 	if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
-		printf ("    eTSEC2 is in sgmii mode.\n");
+		printf("eTSEC2 is in sgmii mode.\n");
 
 	puts("\n");
 #ifdef CONFIG_PCIE2

board/freescale/p2020ds/p2020ds.c

@@ -207,9 +207,9 @@ void pci_init_board(void)
 	debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
 
 	if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
-		printf("    eTSEC2 is in sgmii mode.\n");
+		printf("eTSEC2 is in sgmii mode.\n");
 	if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
-		printf("    eTSEC3 is in sgmii mode.\n");
+		printf("eTSEC3 is in sgmii mode.\n");
 
 	puts("\n");
 #ifdef CONFIG_PCIE2