integratorap/cp/versatile: remove non used functions

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Peter Pearse <peter.pearse@arm.com>

board/armltd/integratorap/integratorap.c

@@ -38,8 +38,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-void flash__init (void);
-void ether__init (void);
 void peripheral_power_enable (void);
 
 #if defined(CONFIG_SHOW_BOOT_PROGRESS)
@@ -51,13 +49,6 @@ void show_boot_progress(int progress)
 
 #define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
 
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-		"subs %0, %1, #1\n"
-		"bne 1b":"=r" (loops):"0" (loops));
-}
-
 /*
  * Miscellaneous platform dependent initialisations
  */
@@ -79,11 +70,9 @@ extern void cm_remap(void);
 
 	icache_enable ();
 
-	flash__init ();
 	return 0;
 }
 
-
 int misc_init_r (void)
 {
 #ifdef CONFIG_PCI
@@ -93,23 +82,6 @@ int misc_init_r (void)
 	return (0);
 }
 
-
-/******************************
- Routine:
- Description:
-******************************/
-void flash__init (void)
-{
-}
-/*************************************************************
- Routine:ether__init
- Description: take the Ethernet controller out of reset and wait
-			   for the EEPROM load to complete.
-*************************************************************/
-void ether__init (void)
-{
-}
-
 /******************************
  Routine:
  Description:

board/armltd/integratorcp/integratorcp.c

@@ -37,8 +37,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-void flash__init (void);
-void ether__init (void);
 void peripheral_power_enable (void);
 
 #if defined(CONFIG_SHOW_BOOT_PROGRESS)
@@ -71,34 +69,15 @@ extern void cm_remap(void);
 
 	icache_enable ();
 
-	flash__init ();
-	ether__init ();
 	return 0;
 }
 
-
 int misc_init_r (void)
 {
 	setenv("verify", "n");
 	return (0);
 }
 
-/******************************
- Routine:
- Description:
-******************************/
-void flash__init (void)
-{
-}
-/*************************************************************
- Routine:ether__init
- Description: take the Ethernet controller out of reset and wait
-	      for the EEPROM load to complete.
-*************************************************************/
-void ether__init (void)
-{
-}
-
 /******************************
  Routine:
  Description:

board/armltd/versatile/versatile.c

@@ -46,13 +46,6 @@ void show_boot_progress(int progress)
 
 #define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
 
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-		"subs %0, %1, #1\n"
-		"bne 1b":"=r" (loops):"0" (loops));
-}
-
 /*
  * Miscellaneous platform dependent initialisations
  */