Jelajahi Sumber

x86: Use TEXT_BASE in linker scripts

Use TEXT_BASE rather than a hard-coded base address on x86 linker scripts.
This will allow any board to define its base link address without having
to modify the linker script
Graeme Russ 14 tahun lalu
induk
melakukan
de25059404
1 mengubah file dengan 4 tambahan dan 4 penghapusan
  1. 4 4
      board/eNET/u-boot.lds

+ 4 - 4
board/eNET/u-boot.lds

@@ -27,7 +27,7 @@ ENTRY(_start)
 
 SECTIONS
 {
-	. = 0x06000000;		/* Location of bootcode in flash */
+	. = TEXT_BASE;		/* Location of bootcode in flash */
 	_i386boot_text_start = .;
 	.text  : { *(.text); }
 
@@ -98,12 +98,12 @@ SECTIONS
 	 * The fff0 offset of resetvec is important, however.
 	 */
 	. = 0xfffffe00;
-	.start32 : AT (0x0603fe00) { *(.start32); }
+	.start32 : AT (TEXT_BASE + 0x3fe00) { *(.start32); }
 
 	. = 0xf800;
-	.start16 : AT (0x0603f800) { *(.start16); }
+	.start16 : AT (TEXT_BASE + 0x3f800) { *(.start16); }
 
 	. = 0xfff0;
-	.resetvec : AT (0x0603fff0) { *(.resetvec); }
+	.resetvec : AT (TEXT_BASE + 0x3fff0) { *(.resetvec); }
 	_i386boot_end = (LOADADDR(.resetvec) + SIZEOF(.resetvec) );
 }