Merge branch 'at91' of git://git.denx.de/u-boot-atmel

arch/arm/cpu/arm926ejs/at91/cpu.c

@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
  * (C) Copyright 2009
  * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
@@ -22,12 +24,11 @@
  */
 
 #include <common.h>
-#ifdef CONFIG_AT91_LEGACY
-#warning Your board is using legacy SoC access. Please update!
-#endif
 
 #include <asm/arch/hardware.h>
 #include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_gpbr.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/io.h>
 
@@ -35,18 +36,26 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK 0
 #endif
 
-/*
- * The at91sam9260 has 4 GPBR (0-3), we'll use the last one, nr 3,
- * to keep track of the bootcount.
- */
-#define AT91_GPBR_BOOTCOUNT_REGISTER 3
-#define AT91_BOOTCOUNT_ADDRESS (AT91_GPBR + 4*AT91_GPBR_BOOTCOUNT_REGISTER)
-
 int arch_cpu_init(void)
 {
 	return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
 }
 
+void arch_preboot_os(void)
+{
+	ulong cpiv;
+	at91_pit_t *pit = (at91_pit_t *) AT91_PIT_BASE;
+
+	cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir));
+
+	/*
+	 * Disable PITC
+	 * Add 0x1000 to current counter to stop it faster
+	 * without waiting for wrapping back to 0
+	 */
+	writel(cpiv + 0x1000, &pit->mr);
+}
+
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
@@ -66,27 +75,26 @@ int print_cpuinfo(void)
 
 #ifdef CONFIG_BOOTCOUNT_LIMIT
 /*
- * Just as the mpc5xxx, we combine the BOOTCOUNT_MAGIC and boocount
- * in one 32-bit register. This is done, as the AT91SAM9260 only has
- * 4 GPBR.
+ * We combine the BOOTCOUNT_MAGIC and bootcount in one 32-bit register.
+ * This is done so we need to use only one of the four GPBR registers.
  */
 void bootcount_store (ulong a)
 {
-	volatile ulong *save_addr =
-		(volatile ulong *)(AT91_BASE_SYS + AT91_BOOTCOUNT_ADDRESS);
+	at91_gpbr_t *gpbr = (at91_gpbr_t *) AT91_GPR_BASE;
 
-	*save_addr = (BOOTCOUNT_MAGIC & 0xffff0000) | (a & 0x0000ffff);
+	writel((BOOTCOUNT_MAGIC & 0xffff0000) | (a & 0x0000ffff),
+		&gpbr->reg[AT91_GPBR_INDEX_BOOTCOUNT]);
 }
 
 ulong bootcount_load (void)
 {
-	volatile ulong *save_addr =
-		(volatile ulong *)(AT91_BASE_SYS + AT91_BOOTCOUNT_ADDRESS);
+	at91_gpbr_t *gpbr = (at91_gpbr_t *) AT91_GPR_BASE;
 
-	if ((*save_addr & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
+	ulong val = readl(&gpbr->reg[AT91_GPBR_INDEX_BOOTCOUNT]);
+	if ((val & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
 		return 0;
 	else
-		return (*save_addr & 0x0000ffff);
+		return val & 0x0000ffff;
 }
 
 #endif /* CONFIG_BOOTCOUNT_LIMIT */

arch/arm/include/asm/arch-at91/at91_emac.h

@@ -61,7 +61,7 @@ typedef struct at91_emac {
 	u32	 reserved2[3];
 	u32	 hsh;
 	u32	 hsl;
-	u32	 sh1l;
+	u32	 sa1l;
 	u32	 sa1h;
 	u32	 sa2l;
 	u32	 sa2h;

drivers/net/at91_emac.c

@@ -127,13 +127,19 @@ void at91emac_DisableMDIO(at91_emac_t *at91mac)
 int  at91emac_read(at91_emac_t *at91mac, unsigned char addr,
 		unsigned char reg, unsigned short *value)
 {
+	unsigned long netstat;
 	at91emac_EnableMDIO(at91mac);
 
 	writel(AT91_EMAC_MAN_HIGH | AT91_EMAC_MAN_RW_R |
 		AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 |
 		AT91_EMAC_MAN_PHYA(addr),
 		&at91mac->man);
-	udelay(10000);
+
+	do {
+		netstat = readl(&at91mac->sr);
+		DEBUG_AT91PHY("poll SR %08lx\n", netstat);
+	} while (!(netstat & AT91_EMAC_SR_IDLE));
+
 	*value = readl(&at91mac->man) & AT91_EMAC_MAN_DATA_MASK;
 
 	at91emac_DisableMDIO(at91mac);
@@ -146,6 +152,7 @@ int  at91emac_read(at91_emac_t *at91mac, unsigned char addr,
 int  at91emac_write(at91_emac_t *at91mac, unsigned char addr,
 		unsigned char reg, unsigned short value)
 {
+	unsigned long netstat;
 	DEBUG_AT91PHY("AT91PHY write %x REG(%d)=%x\n", at91mac, reg, &value)
 
 	at91emac_EnableMDIO(at91mac);
@@ -154,9 +161,14 @@ int  at91emac_write(at91_emac_t *at91mac, unsigned char addr,
 		AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 |
 		AT91_EMAC_MAN_PHYA(addr) | (value & AT91_EMAC_MAN_DATA_MASK),
 		&at91mac->man);
-	udelay(10000);
+
+	do {
+		netstat = readl(&at91mac->sr);
+		DEBUG_AT91PHY("poll SR %08lx\n", netstat);
+	} while (!(netstat & AT91_EMAC_SR_IDLE));
 
 	at91emac_DisableMDIO(at91mac);
+
 	return 0;
 }
 
@@ -500,11 +512,7 @@ int at91emac_register(bd_t *bis, unsigned long iobase)
 	memset(emacfix, 0, sizeof(emac_device));
 
 	memset(dev, 0, sizeof(*dev));
-#ifndef CONFIG_RMII
-	sprintf(dev->name, "AT91 EMAC");
-#else
-	sprintf(dev->name, "AT91 EMAC RMII");
-#endif
+	sprintf(dev->name, "emac");
 	dev->iobase = iobase;
 	dev->priv = emacfix;
 	dev->init = at91emac_init;

drivers/serial/atmel_usart.c

@@ -1,6 +1,9 @@
 /*
  * Copyright (C) 2004-2006 Atmel Corporation
  *
+ * Modified to support C structur SoC access by
+ * Andreas Bießmann <biessmann@corscience.de>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -16,10 +19,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <common.h>
-#ifndef CONFIG_AT91_LEGACY
-#define CONFIG_AT91_LEGACY
-#warning Please update to use C structur SoC access !
-#endif
 #include <watchdog.h>
 
 #include <asm/io.h>
@@ -46,6 +45,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void serial_setbrg(void)
 {
+	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
 	unsigned long divisor;
 	unsigned long usart_hz;
 
@@ -56,32 +56,37 @@ void serial_setbrg(void)
 	 */
 	usart_hz = get_usart_clk_rate(USART_ID);
 	divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate;
-	usart3_writel(BRGR, USART3_BF(CD, divisor));
+	writel(USART3_BF(CD, divisor), &usart->brgr);
 }
 
 int serial_init(void)
 {
-	usart3_writel(CR, USART3_BIT(RSTRX) | USART3_BIT(RSTTX));
+	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+
+	writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr);
 
 	serial_setbrg();
 
-	usart3_writel(CR, USART3_BIT(RXEN) | USART3_BIT(TXEN));
-	usart3_writel(MR, (USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
+	writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr);
+	writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
 			   | USART3_BF(USCLKS, USART3_USCLKS_MCK)
 			   | USART3_BF(CHRL, USART3_CHRL_8)
 			   | USART3_BF(PAR, USART3_PAR_NONE)
-			   | USART3_BF(NBSTOP, USART3_NBSTOP_1)));
+			   | USART3_BF(NBSTOP, USART3_NBSTOP_1)),
+			   &usart->mr);
 
 	return 0;
 }
 
 void serial_putc(char c)
 {
+	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+
 	if (c == '\n')
 		serial_putc('\r');
 
-	while (!(usart3_readl(CSR) & USART3_BIT(TXRDY))) ;
-	usart3_writel(THR, c);
+	while (!(readl(&usart->csr) & USART3_BIT(TXRDY)));
+	writel(c, &usart->thr);
 }
 
 void serial_puts(const char *s)
@@ -92,12 +97,15 @@ void serial_puts(const char *s)
 
 int serial_getc(void)
 {
-	while (!(usart3_readl(CSR) & USART3_BIT(RXRDY)))
+	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+
+	while (!(readl(&usart->csr) & USART3_BIT(RXRDY)))
 		 WATCHDOG_RESET();
-	return usart3_readl(RHR);
+	return readl(&usart->rhr);
 }
 
 int serial_tstc(void)
 {
-	return (usart3_readl(CSR) & USART3_BIT(RXRDY)) != 0;
+	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+	return (readl(&usart->csr) & USART3_BIT(RXRDY)) != 0;
 }

drivers/serial/atmel_usart.h

@@ -3,6 +3,9 @@
  *
  * Copyright (C) 2005-2006 Atmel Corporation
  *
+ * Modified to support C structure SoC access by
+ * Andreas Bießmann <biessmann@corscience.de>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -20,32 +23,27 @@
 #ifndef __DRIVERS_ATMEL_USART_H__
 #define __DRIVERS_ATMEL_USART_H__
 
-/* USART3 register offsets */
-#define USART3_CR				0x0000
-#define USART3_MR				0x0004
-#define USART3_IER				0x0008
-#define USART3_IDR				0x000c
-#define USART3_IMR				0x0010
-#define USART3_CSR				0x0014
-#define USART3_RHR				0x0018
-#define USART3_THR				0x001c
-#define USART3_BRGR				0x0020
-#define USART3_RTOR				0x0024
-#define USART3_TTGR				0x0028
-#define USART3_FIDI				0x0040
-#define USART3_NER				0x0044
-#define USART3_XXR				0x0048
-#define USART3_IFR				0x004c
-#define USART3_RPR				0x0100
-#define USART3_RCR				0x0104
-#define USART3_TPR				0x0108
-#define USART3_TCR				0x010c
-#define USART3_RNPR				0x0110
-#define USART3_RNCR				0x0114
-#define USART3_TNPR				0x0118
-#define USART3_TNCR				0x011c
-#define USART3_PTCR				0x0120
-#define USART3_PTSR				0x0124
+/* USART3 register footprint */
+typedef struct atmel_usart3 {
+	u32	cr;
+	u32	mr;
+	u32	ier;
+	u32	idr;
+	u32	imr;
+	u32	csr;
+	u32	rhr;
+	u32	thr;
+	u32	brgr;
+	u32	rtor;
+	u32	ttgr;
+	u32	reserved0[5];
+	u32	fidi;
+	u32	ner;
+	u32	reserved1;
+	u32	ifr;
+	u32	man;
+	u32	reserved2[54]; // version and PDC not needed
+} atmel_usart3_t;
 
 /* Bitfields in CR */
 #define USART3_RSTRX_OFFSET			2
@@ -305,10 +303,4 @@
 		    << USART3_##name##_OFFSET))		\
 	 | USART3_BF(name,value))
 
-/* Register access macros */
-#define usart3_readl(reg)				\
-	readl((void *)USART_BASE + USART3_##reg)
-#define usart3_writel(reg,value)			\
-	writel((value), (void *)USART_BASE + USART3_##reg)
-
 #endif /* __DRIVERS_ATMEL_USART_H__ */