configs: Remove CONFIG_NET_MULTI from board files

CONFIG_NET_MULTI is not used anymore, so remove it from board files.

Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Kumar Gala <kumar.gala@freescale.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Tom Rini <trini@ti.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Stefano Babic <sbabic@denx.de>
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>

include/configs/P1010RDB.h

@@ -519,10 +519,6 @@ extern unsigned long get_sdram_size(void);
 #endif
 
 #if defined(CONFIG_TSEC_ENET)
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
-
 #define CONFIG_MII			/* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
 #define CONFIG_TSEC1	1

include/configs/PM826.h

@@ -100,11 +100,9 @@
  *
  * if CONFIG_ETHER_ON_SCC is selected, then
  *   - CONFIG_ETHER_INDEX must be set to the channel number (1-4)
- *   - CONFIG_NET_MULTI must not be defined
  *
  * if CONFIG_ETHER_ON_FCC is selected, then
  *   - one or more CONFIG_ETHER_ON_FCCx (x=1,2,3) must also be selected
- *   - CONFIG_NET_MULTI must be defined
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
  * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.

include/configs/PM828.h

@@ -100,11 +100,9 @@
  *
  * if CONFIG_ETHER_ON_SCC is selected, then
  *   - CONFIG_ETHER_INDEX must be set to the channel number (1-4)
- *   - CONFIG_NET_MULTI must not be defined
  *
  * if CONFIG_ETHER_ON_FCC is selected, then
  *   - one or more CONFIG_ETHER_ON_FCCx (x=1,2,3) must also be selected
- *   - CONFIG_NET_MULTI must be defined
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
  * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.

include/configs/cam_enc_4xx.h

@@ -68,7 +68,6 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT	10
-#define CONFIG_NET_MULTI
 #define CONFIG_CMD_MII
 #define CONFIG_SYS_DCACHE_OFF
 #define CONFIG_RESET_PHY_R

include/configs/coreboot.h

@@ -216,10 +216,4 @@
  */
 #define CONFIG_PCI
 
-/*-----------------------------------------------------------------------
- * Network device support
- */
-#define CONFIG_NET_MULTI
-
-
 #endif	/* __CONFIG_H */

include/configs/ecovec.h

@@ -88,7 +88,6 @@
 #define CONFIG_SH_I2C_BASE1		0xA4750000
 
 /* Ether */
-#define CONFIG_NET_MULTI 1
 #define CONFIG_SH_ETHER 1
 #define CONFIG_SH_ETHER_USE_PORT (0)
 #define CONFIG_SH_ETHER_PHY_ADDR (0x1f)

include/configs/efikamx.h

@@ -206,7 +206,6 @@
 /* USB NET */
 #ifdef	CONFIG_CMD_NET
 #define	CONFIG_USB_ETHER_ASIX
-#define	CONFIG_NET_MULTI
 #define	CONFIG_CMD_PING
 #define	CONFIG_CMD_DHCP
 #endif

include/configs/enbw_cmc.h

@@ -145,7 +145,6 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT	10
-#define CONFIG_NET_MULTI
 #endif
 
 /*

include/configs/ethernut5.h

@@ -179,7 +179,6 @@
 #endif
 
 /* Ethernet */
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_MACB
 #define CONFIG_RMII

include/configs/flea3.h

@@ -113,7 +113,6 @@
 /*
  * Ethernet on SOC (FEC)
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE	FEC_BASE_ADDR
 #define CONFIG_PHYLIB

include/configs/m28evk.h

@@ -187,7 +187,6 @@
  * Ethernet on SOC (FEC)
  */
 #ifdef	CONFIG_CMD_NET
-#define	CONFIG_NET_MULTI
 #define	CONFIG_ETHPRIME			"FEC0"
 #define	CONFIG_FEC_MXC
 #define	CONFIG_FEC_MXC_MULTI

include/configs/omap3_evm_common.h

@@ -248,7 +248,6 @@
 #if defined(CONFIG_CMD_NET)
 
 /* Ethernet (SMSC9115 from SMSC9118 family) */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_32_BIT
 #define CONFIG_SMC911X_BASE		0x2C000000

include/configs/omap3_mvblx.h

@@ -269,7 +269,6 @@
  *----------------------------------------------------------------------------
  */
 #if defined(CONFIG_CMD_NET)
-  #define CONFIG_NET_MULTI
   #define CONFIG_SMC911X		1
   #define CONFIG_SMC911X_32_BIT
   #define CONFIG_SMC911X_BASE     0x2C000000

include/configs/p1_p2_rdb_pc.h

@@ -630,7 +630,6 @@
 #endif
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP	/* do pci plug-and-play */
 #define CONFIG_E1000	/* Defind e1000 pci Ethernet card*/
 #define CONFIG_CMD_PCI
@@ -641,11 +640,6 @@
 #endif /* CONFIG_PCI */
 
 #if defined(CONFIG_TSEC_ENET)
-
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
-
 #define CONFIG_MII		/* MII PHY management */
 #define CONFIG_TSEC1
 #define CONFIG_TSEC1_NAME	"eTSEC1"

include/configs/tam3517-common.h

@@ -238,7 +238,6 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
 
 /* Defines for SPL */
 #define CONFIG_SPL