mpc8641: Try to detect old .dts files

Since we've changed the memory map of the board, be nice and
add some checking to try to catch out-of-date .dts files.  We do
this by checking the CCSRBAR location in the .dts and comparing
it to the CCSRBAR location in u-boot.  If they don't match, a
warning msg is printed.  This isn't foolproof, but it's simple and
will catch most of the cases where an out-of-date .dts is present,
including all of the cases where a new u-boot is used with an old
standard MPC8641 .dts file as supplied with Linux.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

board/freescale/mpc8641hpcn/mpc8641hpcn.c

@@ -254,6 +254,10 @@ extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
+	int off;
+	u64 *tmp;
+	u32 *addrcells;
+
 	ft_cpu_setup(blob, bd);
 
 #ifdef CONFIG_PCI1
@@ -262,6 +266,29 @@ ft_board_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_PCI2
 	ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
 #endif
+
+	/*
+	 * Warn if it looks like the device tree doesn't match u-boot.
+	 * This is just an estimation, based on the location of CCSR,
+	 * which is defined by the "reg" property in the soc node.
+	 */
+	off = fdt_path_offset(blob, "/soc8641");
+	addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL);
+	tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL);
+
+	if (tmp) {
+		u64 addr;
+		if (addrcells && (*addrcells == 2))
+			addr = *tmp;
+		else
+			addr = *(u32 *)tmp;
+
+		if (addr != CONFIG_SYS_CCSRBAR_PHYS)
+			printf("WARNING: The CCSRBAR address in your .dts "
+			       "does not match the address of the CCSR "
+			       "in u-boot.  This means your .dts might "
+			       "be old.\n");
+	}
 }
 #endif
 

include/configs/MPC8641HPCN.h

@@ -115,8 +115,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0xf
+#define CONFIG_SYS_CCSRBAR_PHYS		(CONFIG_SYS_CCSRBAR_PHYS_LOW \
+					 | ((u64)CONFIG_SYS_CCSRBAR_PHYS_HIGH << 32))
 #else
 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0x0
+#define CONFIG_SYS_CCSRBAR_PHYS		CONFIG_SYS_CCSRBAR_PHYS_LOW
 #endif
 
 #define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)