board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.

Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
Those always evaluated TRUE, and thus were always compiled
even when IDE really wasn't defined/wanted.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

board/jupiter/jupiter.c

@@ -281,7 +281,7 @@ void pci_init_board(void)
 }
 #endif
 
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
 
 void init_ide_reset (void)
 {
@@ -306,7 +306,7 @@ void ide_set_reset (int idereset)
 		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
 
 #if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
 void

board/kup/common/pcmcia.c

@@ -144,7 +144,7 @@ int pcmcia_hardware_disable(int slot)
 
 	return (0);
 }
-#endif	/* CFG_CMD_PCMCIA */
+#endif
 
 
 int pcmcia_voltage_set(int slot, int vcc, int vpp)

board/lwmon/lwmon.c

@@ -960,7 +960,7 @@ U_BOOT_CMD(
 	"lsb     - print current setting\n"
 );
 
-#endif /* CFG_CMD_BSP */
+#endif
 
 /*----------------------------- Utilities -----------------------------*/
 /***********************************************************************

board/lwmon/pcmcia.c

@@ -166,7 +166,7 @@ int pcmcia_hardware_disable(int slot)
 
 	return (0);
 }
-#endif	/* CFG_CMD_PCMCIA */
+#endif
 
 
 int pcmcia_voltage_set(int slot, int vcc, int vpp)

board/mcc200/auto_update.c

@@ -45,7 +45,7 @@
 #endif
 
 #if !defined(CONFIG_CMD_FAT)
-#error "must define CFG_CMD_FAT"
+#error "must define CONFIG_CMD_FAT"
 #endif
 
 #undef AU_DEBUG

board/mcc200/mcc200.c

@@ -307,7 +307,7 @@ void pci_init_board(void)
 }
 #endif
 
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
 
 void init_ide_reset (void)
 {
@@ -320,7 +320,7 @@ void ide_set_reset (int idereset)
 	debug ("ide_reset(%d)\n", idereset);
 
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
 
 #if defined(CONFIG_CMD_DOC)
 extern void doc_probe (ulong physadr);

board/netta/pcmcia.c

@@ -291,7 +291,7 @@ int pcmcia_hardware_disable(int slot)
 
 	return (0);
 }
-#endif	/* CFG_CMD_PCMCIA */
+#endif
 
 
 int pcmcia_voltage_set(int slot, int vcc, int vpp)

board/pcippc2/pcippc2.c

@@ -241,5 +241,5 @@ U_BOOT_CMD(
 	"wd      - print current status\n"
 );
 
-#endif	/* CFG_CMD_BSP */
+#endif
 #endif	/* CONFIG_WATCHDOG */

board/pm520/pm520.c

@@ -299,7 +299,7 @@ void pci_init_board(void)
 }
 #endif
 
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
 
 void init_ide_reset (void)
 {
@@ -312,7 +312,7 @@ void ide_set_reset (int idereset)
 	debug ("ide_reset(%d)\n", idereset);
 
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
 
 #if defined(CONFIG_CMD_DOC)
 extern void doc_probe (ulong physadr);

board/r360mpi/pcmcia.c

@@ -150,7 +150,7 @@ int pcmcia_hardware_disable(int slot)
 
 	return (0);
 }
-#endif	/* CFG_CMD_PCMCIA */
+#endif
 
 
 int pcmcia_voltage_set(int slot, int vcc, int vpp)

board/sacsng/sacsng.c

@@ -873,7 +873,7 @@ spi_chipsel_type spi_chipsel[] = {
 };
 int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
 
-#endif /* CFG_CMD_SPI */
+#endif
 
 #endif /* CONFIG_MISC_INIT_R */
 

board/siemens/pcu_e/pcu_e.c

@@ -408,7 +408,7 @@ U_BOOT_CMD (puma, 4, 1, do_puma,
 	    "status - print PUMA status\n"
 	    "puma load addr len - load PUMA configuration data\n");
 
-#endif /* CFG_CMD_BSP */
+#endif
 
 /* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
 

board/sixnet/sixnet.c

@@ -77,7 +77,7 @@ int checkboard (void)
 
 #if defined(CONFIG_CMD_PCMCIA)
 #error "SXNI855T has no PCMCIA port"
-#endif	/* CFG_CMD_PCMCIA */
+#endif
 
 /* ------------------------------------------------------------------------- */
 

board/ssv/adnpesc1/adnpesc1.c

@@ -89,7 +89,7 @@ spi_chipsel_type spi_chipsel[] = {
 };
 int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
 
-#endif /* CFG_CMD_SPI */
+#endif
 
 #if	defined(CONFIG_POST)
 /*

board/ssv/common/cmd_sled.c

@@ -158,5 +158,5 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD (sled, 3, 0, do_sled,
 	    "sled    - check and set status led\n",
 	    "sled [name [state]]\n" __NAME_STR "    - state: on|off|blink\n");
-#endif /* CFG_CMD_BSP */
+#endif
 #endif	/* CONFIG_STATUS_LED */

board/ssv/common/wd_pio.c

@@ -156,5 +156,5 @@ U_BOOT_CMD(
 	"wd off  - switch watchdog off\n"
 	"wd      - print current status\n"
 );
-#endif	/* CFG_CMD_BSP */
+#endif
 #endif	/* CONFIG_HW_WATCHDOG */

board/total5200/total5200.c

@@ -109,7 +109,7 @@ void pci_init_board(void)
 }
 #endif
 
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
 
 /* IRDA_1 aka PSC6_3 (pin C13) */
 #define GPIO_IRDA_1	0x20000000UL
@@ -133,7 +133,7 @@ void ide_set_reset (int idereset)
 		*(vu_long *) MPC5XXX_GPIO_DATA_O |=  GPIO_IRDA_1;
 	}
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
 
 #ifdef CONFIG_VIDEO_SED13806
 #include <sed13806.h>

board/tqm5200/cmd_stk52xx.c

@@ -1241,4 +1241,4 @@ U_BOOT_CMD(
 	"     - loopback plug(s) for X21/X22 required\n"
 );
 #endif
-#endif /* CFG_CMD_BSP */
+#endif

board/tqm5200/cmd_tb5200.c

@@ -101,4 +101,4 @@ U_BOOT_CMD(
 	);
 
 #endif /* CONFIG_STK52XX */
-#endif /* CFG_CMD_BSP */
+#endif

board/tqm5200/tqm5200.c

@@ -336,7 +336,7 @@ void pci_init_board(void)
 }
 #endif
 
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
 
 #if defined (CONFIG_MINIFAP)
 #define SM501_POWER_MODE0_GATE		0x00000040UL
@@ -389,7 +389,7 @@ void ide_set_reset (int idereset)
 	}
 #endif
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
 
 #ifdef CONFIG_POST
 /*

board/tqm8272/tqm8272.c

@@ -1212,7 +1212,7 @@ int board_nand_init(struct nand_chip *nand)
 	return 0;
 }
 
-#endif	/* CFG_CMD_NAND */
+#endif
 
 #ifdef CONFIG_PCI
 struct pci_controller hose;

board/trab/auto_update.c

@@ -47,7 +47,7 @@
 #endif
 
 #if !defined(CONFIG_CMD_FAT)
-#error "must define CFG_CMD_FAT"
+#error "must define CONFIG_CMD_FAT"
 #endif
 
 /*

board/trab/cmd_trab.c

@@ -893,4 +893,4 @@ U_BOOT_CMD(
 	"      For each measurment a timestamp is printeted\n"
 );
 
-#endif	/* CFG_CMD_BSP */
+#endif

board/trab/trab_fkt.c

@@ -155,7 +155,7 @@ int i2c_write_multiple (uchar chip, uint addr, int alen, uchar *buffer,
 			int len);
 int i2c_read_multiple ( uchar chip, uint addr, int alen, uchar *buffer,
 			int len);
-#endif /* CFG_CMD_I2C */
+#endif
 
 /*
  * TRAB board specific commands. Especially commands for burn-in and function
@@ -1019,10 +1019,10 @@ static int touch_write_clibration_values (int calib_point, int x, int y)
 	}
 	return 1;
 #else
-	printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+	printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
 		"to EEPROM\n");
 	return (1);
-#endif /* CFG_CMD_I2C */
+#endif
 }
 
 
@@ -1130,10 +1130,10 @@ int do_serial_number (char **argv)
 	printf ("%s: unknown command %s\n", __FUNCTION__, argv[2]);
 	return (1);             /* unknown command, return error */
 #else
-	printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+	printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
 		"to EEPROM\n");
 	return (1);
-#endif /* CFG_CMD_I2C */
+#endif
 }
 
 
@@ -1160,10 +1160,10 @@ int do_crc16 (void)
 	}
 	return (0);
 #else
-	printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+	printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
 		"to EEPROM\n");
 	return (1);
-#endif /* CFG_CMD_I2C */
+#endif
 }
 
 
@@ -1272,10 +1272,10 @@ int do_eeprom (char **argv)
 	printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]);
 	return (1);
 #else
-	printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+	printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
 		"to EEPROM\n");
 	return (1);
-#endif /* CFG_CMD_I2C */
+#endif
 }
 
 #if defined(CONFIG_CMD_I2C)
@@ -1408,4 +1408,4 @@ int i2c_read_multiple ( uchar chip, uint addr, int alen,
 	}
 	return (0);
 }
-#endif /* CFG_CMD_I2C */
+#endif

board/uc100/pcmcia.c

@@ -149,7 +149,7 @@ int pcmcia_hardware_disable(int slot)
 
 	return (0);
 }
-#endif	/* CFG_CMD_PCMCIA */
+#endif
 
 
 int pcmcia_voltage_set(int slot, int vcc, int vpp)

board/v38b/v38b.c

@@ -224,7 +224,7 @@ int board_early_init_r(void)
 }
 
 
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
 void init_ide_reset(void)
 {
 	debug("init_ide_reset\n");
@@ -248,7 +248,7 @@ void ide_set_reset(int idereset)
 	} else
 		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
 
 
 #ifdef CONFIG_HW_WATCHDOG

board/xilinx/ml300/serial.c

@@ -151,4 +151,4 @@ kgdb_interruptible(int yes)
 {
 	return;
 }
-#endif				/* CFG_CMD_KGDB */
+#endif