瀏覽代碼

Merge branch 'master' of /home/wd/git/u-boot/custodians

Wolfgang Denk 15 年之前
父節點
當前提交
cc3074c322
共有 3 個文件被更改,包括 70 次插入6 次删除
  1. 60 5
      cpu/ppc4xx/cpu_init.c
  2. 4 1
      drivers/mtd/cfi_flash.c
  3. 6 0
      include/ppc440.h

+ 60 - 5
cpu/ppc4xx/cpu_init.c

@@ -111,17 +111,72 @@ void reconfigure_pll(u32 new_cpu_freq)
 			mtcpr(CPR0_SPCID, reg);
 			reset_needed = 1;
 		}
+	}
+
+	/* Get current value of FWDVA.*/
+	mfcpr(CPR0_PLLD, reg);
+	temp = (reg & PLLD_FWDVA_MASK) >> 16;
 
-		/* Set reload inhibit so configuration will persist across
-		 * processor resets */
+	/*
+	 * Check to see if FWDVA has been set to value of 1. if it has we must
+	 * modify it.
+	 */
+	if (temp == 1) {
+		mfcpr(CPR0_PLLD, reg);
+		/* Get current value of fbdv.  */
+		temp = (reg & PLLD_FBDV_MASK) >> 24;
+		fbdv = temp ? temp : 32;
+		/* Get current value of lfbdv. */
+		temp = (reg & PLLD_LFBDV_MASK);
+		lfbdv = temp ? temp : 64;
+		/*
+		 * Load register that contains current boot strapping option.
+		 */
+		mfcpr(CPR0_ICFG, reg);
+		/* Shift strapping option into low 3 bits.*/
+		reg = (reg >> 28);
+
+		if ((reg == BOOT_STRAP_OPTION_A) || (reg == BOOT_STRAP_OPTION_B) ||
+		    (reg == BOOT_STRAP_OPTION_D) || (reg == BOOT_STRAP_OPTION_E)) {
+			/*
+			 * Get current value of FWDVA. Assign current FWDVA to
+			 * new FWDVB.
+			 */
+			mfcpr(CPR0_PLLD, reg);
+			target_fwdvb = (reg & PLLD_FWDVA_MASK) >> 16;
+			fwdvb = target_fwdvb ? target_fwdvb : 8;
+			/*
+			 * Get current value of FWDVB. Assign current FWDVB to
+			 * new FWDVA.
+			 */
+			target_fwdva = (reg & PLLD_FWDVB_MASK) >> 8;
+			fwdva = target_fwdva ? target_fwdva : 16;
+			/*
+			 * Update CPR0_PLLD with switched FWDVA and FWDVB.
+			 */
+			reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
+				PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
+			reg |= ((fwdva == 16 ? 0 : fwdva) << 16) |
+				((fwdvb == 8 ? 0 : fwdvb) << 8) |
+				((fbdv == 32 ? 0 : fbdv) << 24) |
+				(lfbdv == 64 ? 0 : lfbdv);
+			mtcpr(CPR0_PLLD, reg);
+			/* Acknowledge that a reset is required. */
+			reset_needed = 1;
+		}
+	}
+
+	if (reset_needed) {
+		/*
+		 * Set reload inhibit so configuration will persist across
+		 * processor resets
+		 */
 		mfcpr(CPR0_ICFG, reg);
 		reg &= ~CPR0_ICFG_RLI_MASK;
 		reg |= 1 << 31;
 		mtcpr(CPR0_ICFG, reg);
-	}
 
-	/* Reset processor if configuration changed */
-	if (reset_needed) {
+		/* Reset processor if configuration changed */
 		__asm__ __volatile__ ("sync; isync");
 		mtspr(SPRN_DBCR0, 0x20000000);
 	}

+ 4 - 1
drivers/mtd/cfi_flash.c

@@ -537,7 +537,10 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector,
 	ulong start;
 
 #if CONFIG_SYS_HZ != 1000
-	tout *= CONFIG_SYS_HZ/1000;
+	if ((ulong)CONFIG_SYS_HZ > 100000)
+		tout *= (ulong)CONFIG_SYS_HZ / 1000;  /* for a big HZ, avoid overflow */
+	else
+		tout = DIV_ROUND_UP(tout * (ulong)CONFIG_SYS_HZ, 1000);
 #endif
 
 	/* Wait for command completion */

+ 6 - 0
include/ppc440.h

@@ -68,6 +68,12 @@
 #define CPR0_SPCID	0x0120
 #define CPR0_ICFG	0x0140
 
+/* 440EPX boot strap options */
+#define BOOT_STRAP_OPTION_A	0x00000000
+#define BOOT_STRAP_OPTION_B	0x00000001
+#define BOOT_STRAP_OPTION_D	0x00000003
+#define BOOT_STRAP_OPTION_E	0x00000004
+
 /* 440gx sdr register definations */
 #define SDR0_SDSTP0	0x0020	    /* */
 #define SDR0_SDSTP1	0x0021	    /* */