|
@@ -774,17 +774,26 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
|
|
|
}
|
|
|
}
|
|
|
|
|
|
-/* loop through the sectors from the highest address when the passed
|
|
|
- * address is greater or equal to the sector address we have a match
|
|
|
+/*
|
|
|
+ * Loop through the sector table starting from the previously found sector.
|
|
|
+ * Searches forwards or backwards, dependent on the passed address.
|
|
|
*/
|
|
|
static flash_sect_t find_sector (flash_info_t * info, ulong addr)
|
|
|
{
|
|
|
- flash_sect_t sector;
|
|
|
+ static flash_sect_t saved_sector = 0; /* previously found sector */
|
|
|
+ flash_sect_t sector = saved_sector;
|
|
|
|
|
|
- for (sector = info->sector_count - 1; sector >= 0; sector--) {
|
|
|
- if (addr >= info->start[sector])
|
|
|
- break;
|
|
|
- }
|
|
|
+ while ((info->start[sector] < addr)
|
|
|
+ && (sector < info->sector_count - 1))
|
|
|
+ sector++;
|
|
|
+ while ((info->start[sector] > addr) && (sector > 0))
|
|
|
+ /*
|
|
|
+ * also decrements the sector in case of an overshot
|
|
|
+ * in the first loop
|
|
|
+ */
|
|
|
+ sector--;
|
|
|
+
|
|
|
+ saved_sector = sector;
|
|
|
return sector;
|
|
|
}
|
|
|
|
|
@@ -795,7 +804,8 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
|
|
|
{
|
|
|
void *dstaddr;
|
|
|
int flag;
|
|
|
- flash_sect_t sect;
|
|
|
+ flash_sect_t sect = 0;
|
|
|
+ char sect_found = 0;
|
|
|
|
|
|
dstaddr = map_physmem(dest, info->portwidth, MAP_NOCACHE);
|
|
|
|
|
@@ -840,6 +850,7 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
|
|
|
sect = find_sector(info, dest);
|
|
|
flash_unlock_seq (info, sect);
|
|
|
flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_WRITE);
|
|
|
+ sect_found = 1;
|
|
|
break;
|
|
|
}
|
|
|
|
|
@@ -864,8 +875,10 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
|
|
|
|
|
|
unmap_physmem(dstaddr, info->portwidth);
|
|
|
|
|
|
- return flash_full_status_check (info, find_sector (info, dest),
|
|
|
- info->write_tout, "write");
|
|
|
+ if (!sect_found)
|
|
|
+ sect = find_sector (info, dest);
|
|
|
+
|
|
|
+ return flash_full_status_check (info, sect, info->write_tout, "write");
|
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
@@ -1795,6 +1808,20 @@ static void flash_fixup_atmel(flash_info_t *info, struct cfi_qry *qry)
|
|
|
cfi_reverse_geometry(qry);
|
|
|
}
|
|
|
|
|
|
+static void flash_fixup_stm(flash_info_t *info, struct cfi_qry *qry)
|
|
|
+{
|
|
|
+ /* check if flash geometry needs reversal */
|
|
|
+ if (qry->num_erase_regions > 1) {
|
|
|
+ /* reverse geometry if top boot part */
|
|
|
+ if (info->cfi_version < 0x3131) {
|
|
|
+ /* CFI < 1.1, guess by device id (only M29W320ET now) */
|
|
|
+ if (info->device_id == 0x2256) {
|
|
|
+ cfi_reverse_geometry(qry);
|
|
|
+ }
|
|
|
+ }
|
|
|
+ }
|
|
|
+}
|
|
|
+
|
|
|
/*
|
|
|
* The following code cannot be run from FLASH!
|
|
|
*
|
|
@@ -1868,6 +1895,9 @@ ulong flash_get_size (ulong base, int banknum)
|
|
|
case 0x001f:
|
|
|
flash_fixup_atmel(info, &qry);
|
|
|
break;
|
|
|
+ case 0x0020:
|
|
|
+ flash_fixup_stm(info, &qry);
|
|
|
+ break;
|
|
|
}
|
|
|
|
|
|
debug ("manufacturer is %d\n", info->vendor);
|