arm926ejs: timer: Replace bss variable by gdr

Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc bss
values in the arm926ejs timers implementation.

The usage of bss values in drivers before initialisation of bss is forbidden.
In that special case some data in .rel.dyn gets corrupted.

This patch is similiar to the patch Dirk Behme posted
for the armv7/omap-common/timer.c and added suggestions
from Reinhard Meyer.

Tested on the arm926ejs mx27 based magnesium board
Tested on the arm926ejs kirkwood based suen3 board

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Albert ARIBAUD <albert.aribaud@free.fr>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Stefano Babic <sbabic@denx.de>
cc: Reinhard Meyer <u-boot@emk-elektronik.de>

arch/arm/cpu/arm926ejs/kirkwood/timer.c

@@ -83,8 +83,10 @@ struct kwtmr_registers *kwtmr_regs = (struct kwtmr_registers *)KW_TIMER_BASE;
 #define READ_TIMER			(readl(CNTMR_VAL_REG(UBOOT_CNTR)) /	\
 					 (CONFIG_SYS_TCLK / 1000))
 
-static ulong timestamp;
-static ulong lastdec;
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->tbl
+#define lastdec gd->lastinc
 
 void reset_timer_masked(void)
 {

arch/arm/cpu/arm926ejs/mb86r0x/timer.c

@@ -33,8 +33,10 @@
 #define TIMER_LOAD_VAL	0xffffffff
 #define TIMER_FREQ	(CONFIG_MB86R0x_IOCLK  / 256)
 
-static unsigned long long timestamp;
-static ulong lastdec;
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->tbl
+#define lastdec gd->lastinc
 
 static inline unsigned long long tick_to_time(unsigned long long tick)
 {

arch/arm/cpu/arm926ejs/mx25/timer.c

@@ -41,8 +41,10 @@
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
 
-static ulong timestamp;
-static ulong lastinc;
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->tbl
+#define lastinc gd->lastinc
 
 /*
  * "time" is measured in 1 / CONFIG_SYS_HZ seconds,

arch/arm/cpu/arm926ejs/mx27/timer.c

@@ -43,8 +43,10 @@
 #define GPTCR_CLKSOURCE_32	(4 << 1)	/* Clock source		*/
 #define GPTCR_TEN		1		/* Timer enable		*/
 
-static ulong timestamp;
-static ulong lastinc;
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->tbl
+#define lastinc gd->lastinc
 
 /*
  * "time" is measured in 1 / CONFIG_SYS_HZ seconds,

arch/arm/cpu/arm926ejs/omap/timer.c

@@ -42,8 +42,10 @@
 /* macro to read the 32 bit timer */
 #define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+8))
 
-static ulong timestamp;
-static ulong lastdec;
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->tbl
+#define lastdec gd->lastinc
 
 int timer_init (void)
 {

arch/arm/cpu/arm926ejs/orion5x/timer.c

@@ -90,8 +90,10 @@ static inline ulong read_timer(void)
 	      / (CONFIG_SYS_TCLK / 1000);
 }
 
-static ulong timestamp;
-static ulong lastdec;
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->tbl
+#define lastdec gd->lastinc
 
 void reset_timer_masked(void)
 {

arch/arm/cpu/arm926ejs/spear/timer.c

@@ -36,8 +36,10 @@ static struct gpt_regs *const gpt_regs_p =
 static struct misc_regs *const misc_regs_p =
     (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
 
-static ulong timestamp;
-static ulong lastdec;
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->tbl
+#define lastdec gd->lastinc
 
 int timer_init(void)
 {

arch/arm/cpu/arm926ejs/versatile/timer.c

@@ -42,8 +42,10 @@
 /* macro to read the 32 bit timer */
 #define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4))
 
-static ulong timestamp;
-static ulong lastdec;
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->tbl
+#define lastdec gd->lastinc
 
 #define TIMER_ENABLE	(1 << 7)
 #define TIMER_MODE_MSK	(1 << 6)