Minor code cleanup

CHANGELOG

@@ -2,6 +2,8 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Minor code cleanup
+
 * Merge the new NAND code (testing-NAND brach); see doc/README.nand
   Rewrite of NAND code based on what is in 2.6.12 Linux kernel
   Patch by Ladislav Michl, 29 Jun 2005

board/amcc/bamboo/config.mk

@@ -35,4 +35,3 @@ endif
 
 # legacy nand support
 BOARDLIBS = drivers/nand_legacy/libnand_legacy.a
-

board/bmw/config.mk

@@ -30,4 +30,3 @@ TEXT_BASE = 0xFFF00000
 PLATFORM_CPPFLAGS += -DEMBEDDED -DBIG_ENDIAN_HOST -DINCLUDE_5701_AX_FIX=1\
 		     -DDBG=0 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256\
 		     -DTEXT_BASE=$(TEXT_BASE)
-

board/dave/PPChameleonEVB/config.mk

@@ -32,4 +32,3 @@ BOARDLIBS = drivers/nand/libnand.a
 
 # Compile the legacy NAND code (CFG_NAND_LEGACY must be defined)
 #BOARDLIBS = drivers/nand_legacy/libnand_legacy.a
-

board/dave/PPChameleonEVB/nand.c

@@ -81,7 +81,7 @@ static int ppchameleonevb_device_ready(struct mtd_info *mtdinfo)
 		break;
 	}
 
-        if (in32(GPIO0_IR) & rb_gpio_pin)
+	if (in32(GPIO0_IR) & rb_gpio_pin)
 		return 1;
 	return 0;
 }

board/esd/common/auto_update.c

@@ -42,9 +42,6 @@
 #error "must define CFG_CMD_FAT"
 #endif
 
-
-
-
 extern au_image_t au_image[];
 extern int N_AU_IMAGES;
 

board/esd/common/cmd_loadpci.c

@@ -120,4 +120,3 @@ U_BOOT_CMD(
 	);
 
 #endif
-

board/esd/cpci2dp/cpci2dp.c

@@ -36,9 +36,9 @@ int board_early_init_f (void)
 	cntrl0Reg = mfdcr(cntrl0);
 	mtdcr(cntrl0, cntrl0Reg | ((CFG_EEPROM_WP | CFG_PB_LED | CFG_SELF_RST | CFG_INTA_FAKE) << 5));
 
-        /* set output pins to high */
+	/* set output pins to high */
 	out32(GPIO0_OR,  CFG_EEPROM_WP);
-        /* setup for output (LED=off) */
+	/* setup for output (LED=off) */
 	out32(GPIO0_TCR, CFG_EEPROM_WP | CFG_PB_LED);
 
 	/*

board/esd/cpci405/config.mk

@@ -41,4 +41,3 @@ endif
 
 # Compile the legacy NAND code (CFG_NAND_LEGACY must be defined)
 BOARDLIBS = drivers/nand_legacy/libnand_legacy.a
-

board/esd/cpci750/cpci750.c

@@ -378,7 +378,6 @@ int misc_init_r ()
 			       CFG_MONITOR_BASE,
 			       CFG_MONITOR_BASE + monitor_flash_len  - 1,
 			       &flash_info[3]);
-	
 	}
 	return 0;
 }

board/esd/cpci750/pci.c

@@ -12,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -46,8 +46,8 @@ static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
 
 #ifdef CONFIG_USE_CPCIDVI
 typedef struct {
-        unsigned int base;
-        unsigned int init;
+	unsigned int base;
+	unsigned int init;
 } GT_CPCIDVI_ROM_T;
 
 static GT_CPCIDVI_ROM_T gt_cpcidvi_rom = {0, 0};
@@ -133,20 +133,20 @@ static const unsigned int pci_p2p_configuration[] = {
 
 /********************************************************************
 * pciWriteConfigReg - Write to a PCI configuration register
-*                    - Make sure the GT is configured as a master before writing
-*                      to another device on the PCI.
-*                    - The function takes care of Big/Little endian conversion.
+*		    - Make sure the GT is configured as a master before writing
+*		      to another device on the PCI.
+*		    - The function takes care of Big/Little endian conversion.
 *
 *
 * Inputs:   unsigned int regOffset: The register offset as it apears in the GT spec
-*                   (or any other PCI device spec)
-*           pciDevNum: The device number needs to be addressed.
+*		   (or any other PCI device spec)
+*	    pciDevNum: The device number needs to be addressed.
 *
 *  Configuration Address 0xCF8:
 *
-*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
+*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
 *  |congif|Reserved|  Bus |Device|Function|Register|00|
-*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
+*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
 *
 *********************************************************************/
 void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
@@ -180,20 +180,20 @@ void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
 
 /********************************************************************
 * pciReadConfigReg  - Read from a PCI0 configuration register
-*                    - Make sure the GT is configured as a master before reading
-*                     from another device on the PCI.
-*                   - The function takes care of Big/Little endian conversion.
+*		    - Make sure the GT is configured as a master before reading
+*		      from another device on the PCI.
+*		    - The function takes care of Big/Little endian conversion.
 * INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
-*                        spec)
-*           pciDevNum: The device number needs to be addressed.
+*			spec)
+*	    pciDevNum: The device number needs to be addressed.
 * RETURNS: data , if the data == 0xffffffff check the master abort bit in the
-*                 cause register to make sure the data is valid
+*		  cause register to make sure the data is valid
 *
 *  Configuration Address 0xCF8:
 *
-*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
+*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
 *  |congif|Reserved|  Bus |Device|Function|Register|00|
-*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
+*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
 *
 *********************************************************************/
 unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
@@ -228,21 +228,21 @@ unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
 
 /********************************************************************
 * pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
-*                               the agent is placed on another Bus. For more
-*                               information read P2P in the PCI spec.
+*				the agent is placed on another Bus. For more
+*				information read P2P in the PCI spec.
 *
 * Inputs:   unsigned int regOffset - The register offset as it apears in the
-*           GT spec (or any other PCI device spec).
-*           unsigned int pciDevNum - The device number needs to be addressed.
-*           unsigned int busNum - On which bus does the Target agent connect
-*                                 to.
-*           unsigned int data - data to be written.
+*	    GT spec (or any other PCI device spec).
+*	    unsigned int pciDevNum - The device number needs to be addressed.
+*	    unsigned int busNum - On which bus does the Target agent connect
+*				  to.
+*	    unsigned int data - data to be written.
 *
 *  Configuration Address 0xCF8:
 *
-*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
+*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
 *  |congif|Reserved|  Bus |Device|Function|Register|01|
-*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
+*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
 *
 *  The configuration Address is configure as type-I (bits[1:0] = '01') due to
 *   PCI spec referring to P2P.
@@ -273,23 +273,23 @@ void pciOverBridgeWriteConfigReg (PCI_HOST host,
 
 /********************************************************************
 * pciOverBridgeReadConfigReg  - Read from a PCIn configuration register where
-*                               the agent target locate on another PCI bus.
-*                             - Make sure the GT is configured as a master
-*                               before reading from another device on the PCI.
-*                             - The function takes care of Big/Little endian
-*                               conversion.
+*				the agent target locate on another PCI bus.
+*			      - Make sure the GT is configured as a master
+*				before reading from another device on the PCI.
+*			      - The function takes care of Big/Little endian
+*				conversion.
 * INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
-*                        spec). (configuration register offset.)
-*           pciDevNum: The device number needs to be addressed.
-*           busNum: the Bus number where the agent is place.
+*			 spec). (configuration register offset.)
+*	    pciDevNum: The device number needs to be addressed.
+*	    busNum: the Bus number where the agent is place.
 * RETURNS: data , if the data == 0xffffffff check the master abort bit in the
-*                 cause register to make sure the data is valid
+*		  cause register to make sure the data is valid
 *
 *  Configuration Address 0xCF8:
 *
-*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
+*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
 *  |congif|Reserved|  Bus |Device|Function|Register|01|
-*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
+*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
 *
 *********************************************************************/
 unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
@@ -393,7 +393,7 @@ static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
 
 /********************************************************************
 * pciGetBaseAddress - Gets the base address of a PCI.
-*           - If the PCI size is 0 then this base address has no meaning!!!
+*	    - If the PCI size is 0 then this base address has no meaning!!!
 *
 *
 * INPUT:   Bus, Region - The bus and region we ask for its base address.
@@ -501,13 +501,13 @@ void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
 
 /********************************************************************
 * pciSetRegionFeatures - This function modifys one of the 8 regions with
-*                         feature bits given as an input.
-*                       - Be advised to check the spec before modifying them.
+*			  feature bits given as an input.
+*			- Be advised to check the spec before modifying them.
 * Inputs: PCI_PROTECT_REGION region - one of the eight regions.
-*         unsigned int features - See file: pci.h there are defintion for those
-*                                 region features.
-*         unsigned int baseAddress - The region base Address.
-*         unsigned int topAddress - The region top Address.
+*	  unsigned int features - See file: pci.h there are defintion for those
+*				  region features.
+*	  unsigned int baseAddress - The region base Address.
+*	  unsigned int topAddress - The region top Address.
 * Returns: false if one of the parameters is erroneous true otherwise.
 *********************************************************************/
 bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
@@ -541,7 +541,7 @@ bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
 
 /********************************************************************
 * pciDisableAccessRegion - Disable The given Region by writing MAX size
-*                           to its low Address and MIN size to its high Address.
+*			    to its low Address and MIN size to its high Address.
 *
 * Inputs:   PCI_ACCESS_REGIONS region - The region we to be Disabled.
 * Returns:  N/A.
@@ -588,12 +588,12 @@ bool pciArbiterDisable (PCI_HOST host)
 * pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low)
 *
 * Inputs:   PCI_AGENT_PRIO internalAgent - priotity for internal agent.
-*           PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent.
-*           PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent.
-*           PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent.
-*           PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent.
-*           PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent.
-*           PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent.
+*	    PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent.
+*	    PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent.
+*	    PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent.
+*	    PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent.
+*	    PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent.
+*	    PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent.
 * Returns:  true
 *********************************************************************/
 bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent,
@@ -619,17 +619,17 @@ bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent,
 
 /********************************************************************
 * pciParkingDisable - Park on last option disable, with this function you can
-*                      disable the park on last mechanism for each agent.
-*                      disabling this option for all agents results parking
-*                      on the internal master.
+*		       disable the park on last mechanism for each agent.
+*		       disabling this option for all agents results parking
+*		       on the internal master.
 *
 * Inputs: PCI_AGENT_PARK internalAgent -  parking Disable for internal agent.
-*         PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
-*         PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
-*         PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
-*         PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
-*         PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
-*         PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
+*	  PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
+*	  PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
+*	  PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
+*	  PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
+*	  PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
+*	  PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
 * Returns:  true
 *********************************************************************/
 bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
@@ -655,11 +655,11 @@ bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
 
 /********************************************************************
 * pciEnableBrokenAgentDetection - A master is said to be broken if it fails to
-*                       respond to grant assertion within a window specified in
-*                       the input value: 'brokenValue'.
+*			respond to grant assertion within a window specified in
+*			the input value: 'brokenValue'.
 *
 * Inputs: unsigned char brokenValue -  A value which limits the Master to hold the
-*                       grant without asserting frame.
+*			grant without asserting frame.
 * Returns:  Error for illegal broken value otherwise true.
 *********************************************************************/
 bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue)
@@ -678,9 +678,9 @@ bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue)
 
 /********************************************************************
 * pciDisableBrokenAgentDetection - This function disable the Broken agent
-*                           Detection mechanism.
-*                           NOTE: This operation may cause a dead lock on the
-*                           pci0 arbitration.
+*			    Detection mechanism.
+*			    NOTE: This operation may cause a dead lock on the
+*			    pci0 arbitration.
 *
 * Inputs:   N/A
 * Returns:  true.
@@ -697,15 +697,15 @@ bool pciDisableBrokenAgentDetection (PCI_HOST host)
 
 /********************************************************************
 * pciP2PConfig - This function set the PCI_n P2P configurate.
-*                 For more information on the P2P read PCI spec.
+*		  For more information on the P2P read PCI spec.
 *
 * Inputs:  unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
-*                                      Boundry.
-*          unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
-*                                      Boundry.
-*          unsigned int busNum - The CPI bus number to which the PCI interface
-*                                      is connected.
-*          unsigned int devNum - The PCI interface's device number.
+*				       Boundry.
+*	   unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
+*				       Boundry.
+*	   unsigned int busNum - The CPI bus number to which the PCI interface
+*				       is connected.
+*	   unsigned int devNum - The PCI interface's device number.
 *
 * Returns:  true.
 *********************************************************************/
@@ -723,15 +723,15 @@ bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow,
 
 /********************************************************************
 * pciSetRegionSnoopMode - This function modifys one of the 4 regions which
-*                          supports Cache Coherency in the PCI_n interface.
+*			   supports Cache Coherency in the PCI_n interface.
 * Inputs: region - One of the four regions.
-*         snoopType - There is four optional Types:
-*                        1. No Snoop.
-*                        2. Snoop to WT region.
-*                        3. Snoop to WB region.
-*                        4. Snoop & Invalidate to WB region.
-*         baseAddress - Base Address of this region.
-*         regionLength - Region length.
+*	  snoopType - There is four optional Types:
+*			 1. No Snoop.
+*			 2. Snoop to WT region.
+*			 3. Snoop to WB region.
+*			 4. Snoop & Invalidate to WB region.
+*	  baseAddress - Base Address of this region.
+*	  regionLength - Region length.
 * Returns: false if one of the parameters is wrong otherwise return true.
 *********************************************************************/
 bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
@@ -754,7 +754,7 @@ bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
 		GT_REG_WRITE (snoopXtopAddress, 0);
 		return true;
 	}
-	baseAddress = baseAddress & 0xfff00000;	/* Granularity of 1MByte */
+	baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */
 	data = (baseAddress >> 20) | snoopType << 12;
 	GT_REG_WRITE (snoopXbaseAddress, data);
 	snoopHigh = (snoopHigh & 0xfff00000) >> 20;
@@ -827,7 +827,7 @@ static void gt_setup_ide (struct pci_controller *hose,
 static void gt_setup_cpcidvi (struct pci_controller *hose,
 			      pci_dev_t dev, struct pci_config_table *entry)
 {
-	u32               bar_value, pci_response;
+	u32		  bar_value, pci_response;
 
 	pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &pci_response);
 	pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
@@ -843,30 +843,30 @@ static void gt_setup_cpcidvi (struct pci_controller *hose,
 
 unsigned char gt_cpcidvi_in8(unsigned int offset)
 {
-        unsigned char     data;
+	unsigned char	  data;
 
 	if (gt_cpcidvi_rom.init == 0) {
-	        return(0);
-	        }
-        data = in8((offset & 0x04) + 0x3f000 + gt_cpcidvi_rom.base);
-        return(data);
+		return(0);
+		}
+	data = in8((offset & 0x04) + 0x3f000 + gt_cpcidvi_rom.base);
+	return(data);
 }
 
 void gt_cpcidvi_out8(unsigned int offset, unsigned char data)
 {
-        unsigned int      off;
-		
+	unsigned int	  off;
+
 	if (gt_cpcidvi_rom.init == 0) {
-	        return;
-	        }
+		return;
+	}
 	off = data;
 	off = ((off << 3) & 0x7f8) + (offset & 0x4) + 0x3e000 + gt_cpcidvi_rom.base;
-        in8(off);
-        return;
+	in8(off);
+	return;
 }
 #endif
 
-/* TODO BJW: Change this for DB64360. This was pulled from the EV64260  */
+/* TODO BJW: Change this for DB64360. This was pulled from the EV64260	*/
 /* and is curently not called *. */
 #if 0
 static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)

board/esd/hh405/config.mk

@@ -32,4 +32,3 @@ TEXT_BASE = 0xFFF80000
 
 # Compile the legacy NAND code (CFG_NAND_LEGACY must be defined)
 BOARDLIBS = drivers/nand_legacy/libnand_legacy.a
-

board/esd/hub405/config.mk

@@ -29,4 +29,3 @@ TEXT_BASE = 0xFFFC0000
 
 # Compile the legacy NAND code (CFG_NAND_LEGACY must be defined)
 BOARDLIBS = drivers/nand_legacy/libnand_legacy.a
-

board/mcc200/mcc200.c

@@ -28,19 +28,12 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 
-//###CHD: es gibt eigentlich kein DDR bei uns -> weg damit!; dto. PCI!
-#if defined(CONFIG_MPC5200_DDR)
-#include "mt46v16m16-75.h"
-#else
-//#include "mt48lc16m16a2-75.h"
 #include "mt48lc8m32b2-6-7.h"
-#endif
 
 extern flash_info_t flash_info[];	/* FLASH chips info */
 
 ulong flash_get_size (ulong base, int banknum);
 
-//###CHD: wenn RAMBOOT gehen wuerde, ....
 #ifndef CFG_RAMBOOT
 static void sdram_start (int hi_addr)
 {
@@ -88,7 +81,6 @@ static void sdram_start (int hi_addr)
  *            is something else than 0x00000000.
  */
 
-#if defined(CONFIG_MPC5200)
 long int initdram (int board_type)
 {
 	ulong dramsize = 0;
@@ -190,58 +182,6 @@ long int initdram (int board_type)
 	return dramsize + dramsize2;
 }
 
-//###CHD: sowas gibt es bei usn nicht!
-#elif defined(CONFIG_MGT5100)
-
-long int initdram (int board_type)
-{
-	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
-	ulong test1, test2;
-
-	/* setup and enable SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
-	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
-	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
-	/* address select register */
-	*(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
-	__asm__ volatile ("sync");
-
-	/* find RAM size */
-	sdram_start(0);
-	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* set SDRAM end address according to size */
-	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CFG_RAMBOOT */
-
-	/* Retrieve amount of SDRAM available */
-	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CFG_RAMBOOT */
-
-	return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
 int checkboard (void)
 {
 	puts ("Board: MCC200\n");

board/mcc200/mt48lc8m32b2-6-7.h

@@ -4,27 +4,9 @@
 
 #define SDRAM_DDR	0		/* is SDR */
 
-#if defined(CONFIG_MPC5200)
 /* Settings for XLB = 132 MHz */
-//#define SDRAM_MODE	0x00cc0000 // CL-3 BURST-8 -> Mode Register—MBAR + 0x0100
-//#define SDRAM_CONTROL	0x501f0000 // Control Register—MBAR + 0x0104
-//#define SDRAM_CONFIG1	0xe2329000 // Delays between commands -> Configuration Register 1—MBAR + 0x0108
-//#define SDRAM_CONFIG2	0x46e70000 // Delays between commands -> Configuration Register 2—MBAR + 0x010C
 
-//Christian
-//#define SDRAM_MODE	0x00cd0000 // CL-3 BURST-8 -> Mode Register—MBAR + 0x0100
-//#define SDRAM_CONTROL	0x501f0000 // Control Register—MBAR + 0x0104
-//#define SDRAM_CONFIG1	0xd2322900 // Delays between commands -> Configuration Register 1—MBAR + 0x0108
-//#define SDRAM_CONFIG2	0x8ad70000 // Delays between commands -> Configuration Register 2—MBAR + 0x010C
-
-//###CHD: ordentliche Doku dazu! CAS=2, etc.
-//STefan
 #define SDRAM_MODE	0x008d0000 // CL-3 BURST-8 -> Mode Register—MBAR + 0x0100
 #define SDRAM_CONTROL	0x504f0000 // Control Register—MBAR + 0x0104
 #define SDRAM_CONFIG1	0xc2222900 // Delays between commands -> Configuration Register 1—MBAR + 0x0108
 #define SDRAM_CONFIG2	0x88c70000 // Delays between commands -> Configuration Register 2—MBAR + 0x010C
-
-
-#else
-#error CONFIG_MPC5200 not defined, please set parameters for your sdram controller in mt48lc8m32b2.h
-#endif

board/netstar/config.mk

@@ -12,4 +12,3 @@ TEXT_BASE = 0x13FC0000
 
 # Compile the new NAND code
 BOARDLIBS = drivers/nand/libnand.a
-

board/netta2/config.mk

@@ -29,4 +29,3 @@ TEXT_BASE = 0x40000000
 
 # Compile the legacy NAND code (CFG_NAND_LEGACY must be defined)
 BOARDLIBS = drivers/nand_legacy/libnand_legacy.a
-

common/cmd_nand.c

@@ -442,8 +442,6 @@ void archflashwp(void *archdata, int wp);
 #define NANDRW_JFFS2	0x02
 #define NANDRW_JFFS2_SKIP	0x04
 
-
-
 /*
  * Imports from nand_legacy.c
  */

doc/README.nand

@@ -179,7 +179,6 @@ More Definitions:
    #define NAND_MAX_CHIPS 1
 
 
-
 NOTE:
 =====
 
@@ -204,7 +203,7 @@ use JFFS, which has been adopted to use the new NAND, and at the same
 time use NAND in legacy mode. The breakage will disappear when the
 board-specific code is changed to the new NAND.
 
-As mentioned above, the legacy code is still used by the DoC subsystem. 
-The consequence of this is that the legacy NAND can't be removed  from 
-the tree until the DoC is ported to use the new NAND support (or boards 
+As mentioned above, the legacy code is still used by the DoC subsystem.
+The consequence of this is that the legacy NAND can't be removed  from
+the tree until the DoC is ported to use the new NAND support (or boards
 with DoC will break).

drivers/i8042.c

@@ -12,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -33,7 +33,7 @@
 extern u8  gt_cpcidvi_in8(u32 offset);
 extern void gt_cpcidvi_out8(u32 offset, u8 data);
 
-#define in8(a)     gt_cpcidvi_in8(a)
+#define in8(a)	   gt_cpcidvi_in8(a)
 #define out8(a, b) gt_cpcidvi_out8(a,b)
 #endif
 
@@ -49,10 +49,10 @@ static int cursor_state = 0;
 
 /* locals */
 
-static int  kbd_input    = -1;          /* no input yet */
-static int  kbd_mapping  = KBD_US;      /* default US keyboard */
-static int  kbd_flags    = NORMAL;      /* after reset */
-static int  kbd_state    = 0;           /* unshift code */
+static int  kbd_input	 = -1;		/* no input yet */
+static int  kbd_mapping	 = KBD_US;	/* default US keyboard */
+static int  kbd_flags	 = NORMAL;	/* after reset */
+static int  kbd_state	 = 0;		/* unshift code */
 
 static void kbd_conv_char (unsigned char scan_code);
 static void kbd_led_set (void);
@@ -68,230 +68,230 @@ static int  kbd_reset (void);
 
 static unsigned char kbd_fct_map [144] =
     { /* kbd_fct_map table for scan code */
-    0,   AS,   AS,   AS,   AS,   AS,   AS,   AS, /* scan  0- 7 */
-   AS,   AS,   AS,   AS,   AS,   AS,   AS,   AS, /* scan  8- F */
-   AS,   AS,   AS,   AS,   AS,   AS,   AS,   AS, /* scan 10-17 */
-   AS,   AS,   AS,   AS,   AS,   CN,   AS,   AS, /* scan 18-1F */
-   AS,   AS,   AS,   AS,   AS,   AS,   AS,   AS, /* scan 20-27 */
-   AS,   AS,   SH,   AS,   AS,   AS,   AS,   AS, /* scan 28-2F */
-   AS,   AS,   AS,   AS,   AS,   AS,   SH,   AS, /* scan 30-37 */
-   AS,   AS,   CP,   0,    0,    0,    0,     0, /* scan 38-3F */
-    0,   0,    0,    0,    0,    NM,   ST,   ES, /* scan 40-47 */
-   ES,   ES,   ES,   ES,   ES,   ES,   ES,   ES, /* scan 48-4F */
-   ES,   ES,   ES,   ES,   0,    0,    AS,    0, /* scan 50-57 */
-    0,   0,    0,    0,    0,    0,    0,     0, /* scan 58-5F */
-    0,   0,    0,    0,    0,    0,    0,     0, /* scan 60-67 */
-    0,   0,    0,    0,    0,    0,    0,     0, /* scan 68-6F */
-   AS,   0,    0,    AS,   0,    0,    AS,    0, /* scan 70-77 */
-    0,   AS,   0,    0,    0,    AS,   0,     0, /* scan 78-7F */
-   AS,   CN,   AS,   AS,   AK,   ST,   EX,   EX, /* enhanced   */
-   AS,   EX,   EX,   AS,   EX,   AS,   EX,   EX  /* enhanced   */
+    0,	 AS,   AS,   AS,   AS,	 AS,   AS,   AS, /* scan  0- 7 */
+   AS,	 AS,   AS,   AS,   AS,	 AS,   AS,   AS, /* scan  8- F */
+   AS,	 AS,   AS,   AS,   AS,	 AS,   AS,   AS, /* scan 10-17 */
+   AS,	 AS,   AS,   AS,   AS,	 CN,   AS,   AS, /* scan 18-1F */
+   AS,	 AS,   AS,   AS,   AS,	 AS,   AS,   AS, /* scan 20-27 */
+   AS,	 AS,   SH,   AS,   AS,	 AS,   AS,   AS, /* scan 28-2F */
+   AS,	 AS,   AS,   AS,   AS,	 AS,   SH,   AS, /* scan 30-37 */
+   AS,	 AS,   CP,   0,	   0,	 0,    0,     0, /* scan 38-3F */
+    0,	 0,    0,    0,	   0,	 NM,   ST,   ES, /* scan 40-47 */
+   ES,	 ES,   ES,   ES,   ES,	 ES,   ES,   ES, /* scan 48-4F */
+   ES,	 ES,   ES,   ES,   0,	 0,    AS,    0, /* scan 50-57 */
+    0,	 0,    0,    0,	   0,	 0,    0,     0, /* scan 58-5F */
+    0,	 0,    0,    0,	   0,	 0,    0,     0, /* scan 60-67 */
+    0,	 0,    0,    0,	   0,	 0,    0,     0, /* scan 68-6F */
+   AS,	 0,    0,    AS,   0,	 0,    AS,    0, /* scan 70-77 */
+    0,	 AS,   0,    0,	   0,	 AS,   0,     0, /* scan 78-7F */
+   AS,	 CN,   AS,   AS,   AK,	 ST,   EX,   EX, /* enhanced   */
+   AS,	 EX,   EX,   AS,   EX,	 AS,   EX,   EX	 /* enhanced   */
     };
 
 static unsigned char kbd_key_map [2][5][144] =
     {
     { /* US keyboard */
     { /* unshift code */
-    0,  0x1b,   '1',   '2',   '3',   '4',   '5',   '6',    /* scan  0- 7 */
-  '7',   '8',   '9',   '0',   '-',   '=',  0x08,  '\t',    /* scan  8- F */
-  'q',   'w',   'e',   'r',   't',   'y',   'u',   'i',    /* scan 10-17 */
-  'o',   'p',   '[',   ']',  '\r',   CN,    'a',   's',    /* scan 18-1F */
-  'd',   'f',   'g',   'h',   'j',   'k',   'l',   ';',    /* scan 20-27 */
- '\'',   '`',   SH,   '\\',   'z',   'x',   'c',   'v',    /* scan 28-2F */
-  'b',   'n',   'm',   ',',   '.',   '/',   SH,    '*',    /* scan 30-37 */
-  ' ',   ' ',   CP,      0,     0,     0,     0,     0,    /* scan 38-3F */
-    0,     0,     0,     0,     0,   NM,    ST,    '7',    /* scan 40-47 */
-  '8',   '9',   '-',   '4',   '5',   '6',   '+',   '1',    /* scan 48-4F */
-  '2',   '3',   '0',   '.',     0,     0,     0,     0,    /* scan 50-57 */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 58-5F */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 60-67 */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 68-6F */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 70-77 */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 78-7F */
-  '\r',   CN,   '/',   '*',   ' ',    ST,   'F',   'A',    /* extended */
-    0,   'D',   'C',     0,   'B',     0,    '@',  'P'     /* extended */
+    0,	0x1b,	'1',   '2',   '3',   '4',   '5',   '6',	   /* scan  0- 7 */
+  '7',	 '8',	'9',   '0',   '-',   '=',  0x08,  '\t',	   /* scan  8- F */
+  'q',	 'w',	'e',   'r',   't',   'y',   'u',   'i',	   /* scan 10-17 */
+  'o',	 'p',	'[',   ']',  '\r',   CN,    'a',   's',	   /* scan 18-1F */
+  'd',	 'f',	'g',   'h',   'j',   'k',   'l',   ';',	   /* scan 20-27 */
+ '\'',	 '`',	SH,   '\\',   'z',   'x',   'c',   'v',	   /* scan 28-2F */
+  'b',	 'n',	'm',   ',',   '.',   '/',   SH,	   '*',	   /* scan 30-37 */
+  ' ',	 ' ',	CP,	 0,	0,     0,     0,     0,	   /* scan 38-3F */
+    0,	   0,	  0,	 0,	0,   NM,    ST,	   '7',	   /* scan 40-47 */
+  '8',	 '9',	'-',   '4',   '5',   '6',   '+',   '1',	   /* scan 48-4F */
+  '2',	 '3',	'0',   '.',	0,     0,     0,     0,	   /* scan 50-57 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 58-5F */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 60-67 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 68-6F */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 70-77 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 78-7F */
+  '\r',	  CN,	'/',   '*',   ' ',    ST,   'F',   'A',	   /* extended */
+    0,	 'D',	'C',	 0,   'B',     0,    '@',  'P'	   /* extended */
     },
     { /* shift code */
-    0,  0x1b,   '!',   '@',   '#',   '$',   '%',   '^',    /* scan  0- 7 */
-  '&',   '*',   '(',   ')',   '_',   '+',  0x08,  '\t',    /* scan  8- F */
-  'Q',   'W',   'E',   'R',   'T',   'Y',   'U',   'I',    /* scan 10-17 */
-  'O',   'P',   '{',   '}',  '\r',   CN,    'A',   'S',    /* scan 18-1F */
-  'D',   'F',   'G',   'H',   'J',   'K',   'L',   ':',    /* scan 20-27 */
-  '"',   '~',   SH,    '|',   'Z',   'X',   'C',   'V',    /* scan 28-2F */
-  'B',   'N',   'M',   '<',   '>',   '?',   SH,    '*',    /* scan 30-37 */
-  ' ',   ' ',   CP,      0,     0,     0,     0,     0,    /* scan 38-3F */
-    0,     0,     0,     0,     0,   NM,    ST,    '7',    /* scan 40-47 */
-  '8',   '9',   '-',   '4',   '5',   '6',   '+',   '1',    /* scan 48-4F */
-  '2',   '3',   '0',   '.',     0,     0,     0,     0,    /* scan 50-57 */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 58-5F */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 60-67 */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 68-6F */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 70-77 */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 78-7F */
-  '\r',   CN,   '/',   '*',   ' ',    ST,   'F',   'A',    /* extended */
-    0,   'D',   'C',     0,   'B',     0,   '@',   'P'     /* extended */
+    0,	0x1b,	'!',   '@',   '#',   '$',   '%',   '^',	   /* scan  0- 7 */
+  '&',	 '*',	'(',   ')',   '_',   '+',  0x08,  '\t',	   /* scan  8- F */
+  'Q',	 'W',	'E',   'R',   'T',   'Y',   'U',   'I',	   /* scan 10-17 */
+  'O',	 'P',	'{',   '}',  '\r',   CN,    'A',   'S',	   /* scan 18-1F */
+  'D',	 'F',	'G',   'H',   'J',   'K',   'L',   ':',	   /* scan 20-27 */
+  '"',	 '~',	SH,    '|',   'Z',   'X',   'C',   'V',	   /* scan 28-2F */
+  'B',	 'N',	'M',   '<',   '>',   '?',   SH,	   '*',	   /* scan 30-37 */
+  ' ',	 ' ',	CP,	 0,	0,     0,     0,     0,	   /* scan 38-3F */
+    0,	   0,	  0,	 0,	0,   NM,    ST,	   '7',	   /* scan 40-47 */
+  '8',	 '9',	'-',   '4',   '5',   '6',   '+',   '1',	   /* scan 48-4F */
+  '2',	 '3',	'0',   '.',	0,     0,     0,     0,	   /* scan 50-57 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 58-5F */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 60-67 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 68-6F */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 70-77 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 78-7F */
+  '\r',	  CN,	'/',   '*',   ' ',    ST,   'F',   'A',	   /* extended */
+    0,	 'D',	'C',	 0,   'B',     0,   '@',   'P'	   /* extended */
     },
     { /* control code */
- 0xff,  0x1b,  0xff,  0x00,  0xff,  0xff,  0xff,  0xff,    /* scan  0- 7 */
- 0x1e,  0xff,  0xff,  0xff,  0x1f,  0xff,  0xff,  '\t',    /* scan  8- F */
- 0x11,  0x17,  0x05,  0x12,  0x14,  0x19,  0x15,  0x09,    /* scan 10-17 */
- 0x0f,  0x10,  0x1b,  0x1d,  '\r',   CN,   0x01,  0x13,    /* scan 18-1F */
- 0x04,  0x06,  0x07,  0x08,  0x0a,  0x0b,  0x0c,  0xff,    /* scan 20-27 */
- 0xff,  0x1c,   SH,   0xff,  0x1a,  0x18,  0x03,  0x16,    /* scan 28-2F */
- 0x02,  0x0e,  0x0d,  0xff,  0xff,  0xff,   SH,   0xff,    /* scan 30-37 */
- 0xff,  0xff,   CP,   0xff,  0xff,  0xff,  0xff,  0xff,    /* scan 38-3F */
- 0xff,  0xff,  0xff,  0xff,  0xff,   NM,    ST,   0xff,    /* scan 40-47 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,    /* scan 48-4F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,    /* scan 50-57 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,    /* scan 58-5F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,    /* scan 60-67 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,    /* scan 68-6F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,    /* scan 70-77 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,    /* scan 78-7F */
-  '\r',   CN,   '/',   '*',   ' ',    ST,  0xff,  0xff,    /* extended */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff     /* extended */
+ 0xff,	0x1b,  0xff,  0x00,  0xff,  0xff,  0xff,  0xff,	   /* scan  0- 7 */
+ 0x1e,	0xff,  0xff,  0xff,  0x1f,  0xff,  0xff,  '\t',	   /* scan  8- F */
+ 0x11,	0x17,  0x05,  0x12,  0x14,  0x19,  0x15,  0x09,	   /* scan 10-17 */
+ 0x0f,	0x10,  0x1b,  0x1d,  '\r',   CN,   0x01,  0x13,	   /* scan 18-1F */
+ 0x04,	0x06,  0x07,  0x08,  0x0a,  0x0b,  0x0c,  0xff,	   /* scan 20-27 */
+ 0xff,	0x1c,	SH,   0xff,  0x1a,  0x18,  0x03,  0x16,	   /* scan 28-2F */
+ 0x02,	0x0e,  0x0d,  0xff,  0xff,  0xff,   SH,	  0xff,	   /* scan 30-37 */
+ 0xff,	0xff,	CP,   0xff,  0xff,  0xff,  0xff,  0xff,	   /* scan 38-3F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,   NM,    ST,	  0xff,	   /* scan 40-47 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,	   /* scan 48-4F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,	   /* scan 50-57 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,	   /* scan 58-5F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,	   /* scan 60-67 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,	   /* scan 68-6F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,	   /* scan 70-77 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,	   /* scan 78-7F */
+  '\r',	  CN,	'/',   '*',   ' ',    ST,  0xff,  0xff,	   /* extended */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff	   /* extended */
     },
     { /* non numeric code */
-    0,  0x1b,   '1',   '2',   '3',   '4',   '5',   '6',    /* scan  0- 7 */
-  '7',   '8',   '9',   '0',   '-',   '=',  0x08,  '\t',    /* scan  8- F */
-  'q',   'w',   'e',   'r',   't',   'y',   'u',   'i',    /* scan 10-17 */
-  'o',   'p',   '[',   ']',  '\r',   CN,    'a',   's',    /* scan 18-1F */
-  'd',   'f',   'g',   'h',   'j',   'k',   'l',   ';',    /* scan 20-27 */
- '\'',   '`',   SH,   '\\',   'z',   'x',   'c',   'v',    /* scan 28-2F */
-  'b',   'n',   'm',   ',',   '.',   '/',   SH,    '*',    /* scan 30-37 */
-  ' ',   ' ',   CP,      0,     0,     0,     0,     0,    /* scan 38-3F */
-    0,     0,     0,     0,     0,   NM,    ST,    'w',    /* scan 40-47 */
-  'x',   'y',   'l',   't',   'u',   'v',   'm',   'q',    /* scan 48-4F */
-  'r',   's',   'p',   'n',     0,     0,     0,     0,    /* scan 50-57 */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 58-5F */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 60-67 */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 68-6F */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 70-77 */
-    0,     0,     0,     0,     0,     0,     0,     0,    /* scan 78-7F */
-  '\r',   CN,   '/',   '*',   ' ',    ST,   'F',   'A',    /* extended */
-    0,   'D',   'C',     0,   'B',     0,    '@',  'P'     /* extended */
+    0,	0x1b,	'1',   '2',   '3',   '4',   '5',   '6',	   /* scan  0- 7 */
+  '7',	 '8',	'9',   '0',   '-',   '=',  0x08,  '\t',	   /* scan  8- F */
+  'q',	 'w',	'e',   'r',   't',   'y',   'u',   'i',	   /* scan 10-17 */
+  'o',	 'p',	'[',   ']',  '\r',   CN,    'a',   's',	   /* scan 18-1F */
+  'd',	 'f',	'g',   'h',   'j',   'k',   'l',   ';',	   /* scan 20-27 */
+ '\'',	 '`',	SH,   '\\',   'z',   'x',   'c',   'v',	   /* scan 28-2F */
+  'b',	 'n',	'm',   ',',   '.',   '/',   SH,	   '*',	   /* scan 30-37 */
+  ' ',	 ' ',	CP,	 0,	0,     0,     0,     0,	   /* scan 38-3F */
+    0,	   0,	  0,	 0,	0,   NM,    ST,	   'w',	   /* scan 40-47 */
+  'x',	 'y',	'l',   't',   'u',   'v',   'm',   'q',	   /* scan 48-4F */
+  'r',	 's',	'p',   'n',	0,     0,     0,     0,	   /* scan 50-57 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 58-5F */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 60-67 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 68-6F */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 70-77 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0,	   /* scan 78-7F */
+  '\r',	  CN,	'/',   '*',   ' ',    ST,   'F',   'A',	   /* extended */
+    0,	 'D',	'C',	 0,   'B',     0,    '@',  'P'	   /* extended */
     },
     { /* right alt mode - not used in US keyboard */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan  0 - 7 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan  8 - F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 10 -17 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 18 -1F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 20 -27 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 28 -2F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 30 -37 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 38 -3F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 40 -47 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 48 -4F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 50 -57 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 58 -5F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 60 -67 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 68 -6F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 70 -77 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 78 -7F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* extended    */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff  /* extended    */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan	 0 - 7 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan	 8 - F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 10 -17 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 18 -1F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 20 -27 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 28 -2F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 30 -37 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 38 -3F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 40 -47 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 48 -4F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 50 -57 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 58 -5F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 60 -67 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 68 -6F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 70 -77 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 78 -7F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* extended    */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff	/* extended    */
     }
     },
     { /* german keyboard */
     { /* unshift code */
-    0,  0x1b,   '1',   '2',   '3',   '4',   '5',   '6', /* scan  0- 7 */
-  '7',   '8',   '9',   '0',  0xe1,  '\'',  0x08,  '\t', /* scan  8- F */
-  'q',   'w',   'e',   'r',   't',   'z',   'u',   'i', /* scan 10-17 */
-  'o',   'p',  0x81,   '+',  '\r',   CN,    'a',   's', /* scan 18-1F */
-  'd',   'f',   'g',   'h',   'j',   'k',   'l',  0x94, /* scan 20-27 */
- 0x84,   '^',   SH,    '#',   'y',   'x',   'c',   'v', /* scan 28-2F */
-  'b',   'n',   'm',   ',',   '.',   '-',   SH,    '*', /* scan 30-37 */
-  ' ',   ' ',   CP,      0,     0,     0,     0,     0, /* scan 38-3F */
-    0,     0,     0,     0,     0,   NM,    ST,    '7', /* scan 40-47 */
-  '8',   '9',   '-',   '4',   '5',   '6',   '+',   '1', /* scan 48-4F */
-  '2',   '3',   '0',   ',',     0,     0,   '<',     0, /* scan 50-57 */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 58-5F */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 60-67 */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 68-6F */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 70-77 */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 78-7F */
-  '\r',   CN,   '/',   '*',   ' ',    ST,   'F',   'A', /* extended */
-    0,   'D',   'C',     0,   'B',     0,    '@',  'P'  /* extended */
+    0,	0x1b,	'1',   '2',   '3',   '4',   '5',   '6', /* scan	 0- 7 */
+  '7',	 '8',	'9',   '0',  0xe1,  '\'',  0x08,  '\t', /* scan	 8- F */
+  'q',	 'w',	'e',   'r',   't',   'z',   'u',   'i', /* scan 10-17 */
+  'o',	 'p',  0x81,   '+',  '\r',   CN,    'a',   's', /* scan 18-1F */
+  'd',	 'f',	'g',   'h',   'j',   'k',   'l',  0x94, /* scan 20-27 */
+ 0x84,	 '^',	SH,    '#',   'y',   'x',   'c',   'v', /* scan 28-2F */
+  'b',	 'n',	'm',   ',',   '.',   '-',   SH,	   '*', /* scan 30-37 */
+  ' ',	 ' ',	CP,	 0,	0,     0,     0,     0, /* scan 38-3F */
+    0,	   0,	  0,	 0,	0,   NM,    ST,	   '7', /* scan 40-47 */
+  '8',	 '9',	'-',   '4',   '5',   '6',   '+',   '1', /* scan 48-4F */
+  '2',	 '3',	'0',   ',',	0,     0,   '<',     0, /* scan 50-57 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 58-5F */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 60-67 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 68-6F */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 70-77 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 78-7F */
+  '\r',	  CN,	'/',   '*',   ' ',    ST,   'F',   'A', /* extended */
+    0,	 'D',	'C',	 0,   'B',     0,    '@',  'P'	/* extended */
     },
     { /* shift code */
-    0,  0x1b,   '!',   '"',  0x15,   '$',   '%',   '&', /* scan  0- 7 */
-  '/',   '(',   ')',   '=',   '?',   '`',  0x08,  '\t', /* scan  8- F */
-  'Q',   'W',   'E',   'R',   'T',   'Z',   'U',   'I', /* scan 10-17 */
-  'O',   'P',  0x9a,   '*',  '\r',   CN,    'A',   'S', /* scan 18-1F */
-  'D',   'F',   'G',   'H',   'J',   'K',   'L',  0x99, /* scan 20-27 */
- 0x8e,  0xf8,   SH,   '\'',   'Y',   'X',   'C',   'V', /* scan 28-2F */
-  'B',   'N',   'M',   ';',   ':',   '_',   SH,    '*', /* scan 30-37 */
-  ' ',   ' ',   CP,      0,     0,     0,     0,     0, /* scan 38-3F */
-    0,     0,     0,     0,     0,   NM,    ST,    '7', /* scan 40-47 */
-  '8',   '9',   '-',   '4',   '5',   '6',   '+',   '1', /* scan 48-4F */
-  '2',   '3',   '0',   ',',     0,     0,   '>',     0, /* scan 50-57 */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 58-5F */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 60-67 */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 68-6F */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 70-77 */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 78-7F */
-  '\r',   CN,   '/',   '*',   ' ',    ST,   'F',   'A', /* extended */
-    0,   'D',   'C',     0,   'B',     0,   '@',   'P'  /* extended */
+    0,	0x1b,	'!',   '"',  0x15,   '$',   '%',   '&', /* scan	 0- 7 */
+  '/',	 '(',	')',   '=',   '?',   '`',  0x08,  '\t', /* scan	 8- F */
+  'Q',	 'W',	'E',   'R',   'T',   'Z',   'U',   'I', /* scan 10-17 */
+  'O',	 'P',  0x9a,   '*',  '\r',   CN,    'A',   'S', /* scan 18-1F */
+  'D',	 'F',	'G',   'H',   'J',   'K',   'L',  0x99, /* scan 20-27 */
+ 0x8e,	0xf8,	SH,   '\'',   'Y',   'X',   'C',   'V', /* scan 28-2F */
+  'B',	 'N',	'M',   ';',   ':',   '_',   SH,	   '*', /* scan 30-37 */
+  ' ',	 ' ',	CP,	 0,	0,     0,     0,     0, /* scan 38-3F */
+    0,	   0,	  0,	 0,	0,   NM,    ST,	   '7', /* scan 40-47 */
+  '8',	 '9',	'-',   '4',   '5',   '6',   '+',   '1', /* scan 48-4F */
+  '2',	 '3',	'0',   ',',	0,     0,   '>',     0, /* scan 50-57 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 58-5F */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 60-67 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 68-6F */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 70-77 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 78-7F */
+  '\r',	  CN,	'/',   '*',   ' ',    ST,   'F',   'A', /* extended */
+    0,	 'D',	'C',	 0,   'B',     0,   '@',   'P'	/* extended */
     },
     { /* control code */
- 0xff,  0x1b,  0xff,  0x00,  0xff,  0xff,  0xff,  0xff, /* scan  0- 7 */
- 0x1e,  0xff,  0xff,  0xff,  0x1f,  0xff,  0xff,  '\t', /* scan  8- F */
- 0x11,  0x17,  0x05,  0x12,  0x14,  0x19,  0x15,  0x09, /* scan 10-17 */
- 0x0f,  0x10,  0x1b,  0x1d,  '\r',   CN,   0x01,  0x13, /* scan 18-1F */
- 0x04,  0x06,  0x07,  0x08,  0x0a,  0x0b,  0x0c,  0xff, /* scan 20-27 */
- 0xff,  0x1c,   SH,   0xff,  0x1a,  0x18,  0x03,  0x16, /* scan 28-2F */
- 0x02,  0x0e,  0x0d,  0xff,  0xff,  0xff,   SH,   0xff, /* scan 30-37 */
- 0xff,  0xff,   CP,   0xff,  0xff,  0xff,  0xff,  0xff, /* scan 38-3F */
- 0xff,  0xff,  0xff,  0xff,  0xff,   NM,    ST,   0xff, /* scan 40-47 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 48-4F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 50-57 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 58-5F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 60-67 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 68-6F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 70-77 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 78-7F */
-  '\r',   CN,   '/',   '*',   ' ',    ST,  0xff,  0xff, /* extended */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff  /* extended */
+ 0xff,	0x1b,  0xff,  0x00,  0xff,  0xff,  0xff,  0xff, /* scan	 0- 7 */
+ 0x1e,	0xff,  0xff,  0xff,  0x1f,  0xff,  0xff,  '\t', /* scan	 8- F */
+ 0x11,	0x17,  0x05,  0x12,  0x14,  0x19,  0x15,  0x09, /* scan 10-17 */
+ 0x0f,	0x10,  0x1b,  0x1d,  '\r',   CN,   0x01,  0x13, /* scan 18-1F */
+ 0x04,	0x06,  0x07,  0x08,  0x0a,  0x0b,  0x0c,  0xff, /* scan 20-27 */
+ 0xff,	0x1c,	SH,   0xff,  0x1a,  0x18,  0x03,  0x16, /* scan 28-2F */
+ 0x02,	0x0e,  0x0d,  0xff,  0xff,  0xff,   SH,	  0xff, /* scan 30-37 */
+ 0xff,	0xff,	CP,   0xff,  0xff,  0xff,  0xff,  0xff, /* scan 38-3F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,   NM,    ST,	  0xff, /* scan 40-47 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 48-4F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 50-57 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 58-5F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 60-67 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 68-6F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 70-77 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 78-7F */
+  '\r',	  CN,	'/',   '*',   ' ',    ST,  0xff,  0xff, /* extended */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff	/* extended */
     },
     { /* non numeric code */
-    0,  0x1b,   '1',   '2',   '3',   '4',   '5',   '6', /* scan  0- 7 */
-  '7',   '8',   '9',   '0',  0xe1,  '\'',  0x08,  '\t', /* scan  8- F */
-  'q',   'w',   'e',   'r',   't',   'z',   'u',   'i', /* scan 10-17 */
-  'o',   'p',  0x81,   '+',  '\r',   CN,    'a',   's', /* scan 18-1F */
-  'd',   'f',   'g',   'h',   'j',   'k',   'l',  0x94, /* scan 20-27 */
- 0x84,   '^',   SH,      0,   'y',   'x',   'c',   'v', /* scan 28-2F */
-  'b',   'n',   'm',   ',',   '.',   '-',   SH,    '*', /* scan 30-37 */
-  ' ',   ' ',   CP,      0,     0,     0,     0,     0, /* scan 38-3F */
-    0,     0,     0,     0,     0,   NM,    ST,    'w', /* scan 40-47 */
-  'x',   'y',   'l',   't',   'u',   'v',   'm',   'q', /* scan 48-4F */
-  'r',   's',   'p',   'n',     0,     0,   '<',     0, /* scan 50-57 */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 58-5F */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 60-67 */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 68-6F */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 70-77 */
-    0,     0,     0,     0,     0,     0,     0,     0, /* scan 78-7F */
-  '\r',   CN,   '/',   '*',   ' ',    ST,   'F',   'A', /* extended */
-    0,   'D',   'C',     0,   'B',     0,    '@',  'P'  /* extended */
+    0,	0x1b,	'1',   '2',   '3',   '4',   '5',   '6', /* scan	 0- 7 */
+  '7',	 '8',	'9',   '0',  0xe1,  '\'',  0x08,  '\t', /* scan	 8- F */
+  'q',	 'w',	'e',   'r',   't',   'z',   'u',   'i', /* scan 10-17 */
+  'o',	 'p',  0x81,   '+',  '\r',   CN,    'a',   's', /* scan 18-1F */
+  'd',	 'f',	'g',   'h',   'j',   'k',   'l',  0x94, /* scan 20-27 */
+ 0x84,	 '^',	SH,	 0,   'y',   'x',   'c',   'v', /* scan 28-2F */
+  'b',	 'n',	'm',   ',',   '.',   '-',   SH,	   '*', /* scan 30-37 */
+  ' ',	 ' ',	CP,	 0,	0,     0,     0,     0, /* scan 38-3F */
+    0,	   0,	  0,	 0,	0,   NM,    ST,	   'w', /* scan 40-47 */
+  'x',	 'y',	'l',   't',   'u',   'v',   'm',   'q', /* scan 48-4F */
+  'r',	 's',	'p',   'n',	0,     0,   '<',     0, /* scan 50-57 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 58-5F */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 60-67 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 68-6F */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 70-77 */
+    0,	   0,	  0,	 0,	0,     0,     0,     0, /* scan 78-7F */
+  '\r',	  CN,	'/',   '*',   ' ',    ST,   'F',   'A', /* extended */
+    0,	 'D',	'C',	 0,   'B',     0,    '@',  'P'	/* extended */
     },
     { /* Right alt mode - is used in German keyboard */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan  0 - 7 */
-  '{',   '[',   ']',   '}',  '\\',  0xff,  0xff,  0xff, /* scan  8 - F */
-  '@',  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 10 -17 */
- 0xff,  0xff,  0xff,   '~',  0xff,  0xff,  0xff,  0xff, /* scan 18 -1F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 20 -27 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 28 -2F */
- 0xff,  0xff,  0xe6,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 30 -37 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 38 -3F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 40 -47 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 48 -4F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,   '|',  0xff, /* scan 50 -57 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 58 -5F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 60 -67 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 68 -6F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 70 -77 */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 78 -7F */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* extended    */
- 0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff  /* extended    */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan	 0 - 7 */
+  '{',	 '[',	']',   '}',  '\\',  0xff,  0xff,  0xff, /* scan	 8 - F */
+  '@',	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 10 -17 */
+ 0xff,	0xff,  0xff,   '~',  0xff,  0xff,  0xff,  0xff, /* scan 18 -1F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 20 -27 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 28 -2F */
+ 0xff,	0xff,  0xe6,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 30 -37 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 38 -3F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 40 -47 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 48 -4F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,   '|',  0xff, /* scan 50 -57 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 58 -5F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 60 -67 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 68 -6F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 70 -77 */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* scan 78 -7F */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff, /* extended    */
+ 0xff,	0xff,  0xff,  0xff,  0xff,  0xff,  0xff,  0xff	/* extended    */
     }
     }
     };
@@ -328,8 +328,8 @@ int i8042_kbd_init (void)
 
 #ifdef CONFIG_USE_CPCIDVI
     if ((penv = getenv ("console")) != NULL) {
-            if (strncmp (penv, "serial", 7) == 0) {
-	            return -1;
+	    if (strncmp (penv, "serial", 7) == 0) {
+		    return -1;
 	    }
     }
 #endif
@@ -345,9 +345,9 @@ int i8042_kbd_init (void)
     {
 	if (kbd_reset() == 0)
 	{
-	    kbd_mapping   = keymap;
-	    kbd_flags     = NORMAL;
-	    kbd_state     = 0;
+	    kbd_mapping	  = keymap;
+	    kbd_flags	  = NORMAL;
+	    kbd_state	  = 0;
 	    kbd_led_set();
 	    return 0;
 	    }
@@ -359,7 +359,7 @@ int i8042_kbd_init (void)
 /*******************************************************************************
  *
  * i8042_tstc - test if keyboard input is available
- *              option: cursor blinking if called in a loop
+ *		option: cursor blinking if called in a loop
  */
 int i8042_tstc (void)
 {
@@ -395,7 +395,7 @@ int i8042_tstc (void)
 /*******************************************************************************
  *
  * i8042_getc - wait till keyboard input is available
- *              option: turn on/off cursor while waiting
+ *		option: turn on/off cursor while waiting
  */
 int i8042_getc (void)
 {
@@ -448,8 +448,8 @@ static void kbd_conv_char (unsigned char scan_code)
     {
 	if (scan_code == 0xe1)
 	{
-	    kbd_flags ^= BRK;     /* reset the break flag */
-	    kbd_flags ^= E1;      /* bitwise EXOR with E1 flag */
+	    kbd_flags ^= BRK;	  /* reset the break flag */
+	    kbd_flags ^= E1;	  /* bitwise EXOR with E1 flag */
 	}
 	return;
     }
@@ -560,7 +560,7 @@ static void kbd_caps (unsigned char scan_code)
     if ((kbd_flags & BRK) == NORMAL)
     {
        kbd_flags ^= CAPS;
-       kbd_led_set ();            /* update keyboard LED */
+       kbd_led_set ();		  /* update keyboard LED */
     }
 }
 
@@ -573,7 +573,7 @@ static void kbd_num (unsigned char scan_code)
     {
        kbd_flags ^= NUM;
        kbd_state = (kbd_flags & NUM) ? AS : NM;
-       kbd_led_set ();            /* update keyboard LED */
+       kbd_led_set ();		  /* update keyboard LED */
     }
 }
 
@@ -585,7 +585,7 @@ static void kbd_scroll (unsigned char scan_code)
     if ((kbd_flags & BRK) == NORMAL)
     {
 	kbd_flags ^= STP;
-	kbd_led_set ();            /* update keyboard LED */
+	kbd_led_set ();		   /* update keyboard LED */
 	if (kbd_flags & STP)
 	    kbd_input = 0x13;
 	else
@@ -615,9 +615,9 @@ static void kbd_alt (unsigned char scan_code)
 static void kbd_led_set (void)
 {
     kbd_input_empty();
-    out8 (I8042_DATA_REG, 0xed);        /* SET LED command */
+    out8 (I8042_DATA_REG, 0xed);	/* SET LED command */
     kbd_input_empty();
-    out8 (I8042_DATA_REG, (kbd_flags & 0x7));    /* LED bits only */
+    out8 (I8042_DATA_REG, (kbd_flags & 0x7));	 /* LED bits only */
 }
 
 

include/configs/CPCI750.h

@@ -12,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -57,7 +57,7 @@
 
 #define CONFIG_CPCI750		1	/* this is an CPCI750 board	*/
 
-#define CONFIG_BAUDRATE		9600 	/* console baudrate = 9600	*/
+#define CONFIG_BAUDRATE		9600	/* console baudrate = 9600	*/
 
 #undef	CONFIG_ECC			/* enable ECC support */
 
@@ -84,19 +84,19 @@
  * for your console driver.
  *
  * what to do:
- * to use the DUART, undef CONFIG_MPSC.  If you have hacked a serial
+ * to use the DUART, undef CONFIG_MPSC.	 If you have hacked a serial
  * cable onto the second DUART channel, change the CFG_DUART port from 1
  * to 0 below.
  *
  * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another
  * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
  */
-#define	CONFIG_MPSC
+#define CONFIG_MPSC
 #define CONFIG_MPSC_PORT	0
 
 /* to change the default ethernet port, use this define (options: 0, 1, 2) */
 #define CONFIG_NET_MULTI
-#define MV_ETH_DEVS             1
+#define MV_ETH_DEVS		1
 #define CONFIG_ETHER_PORT	0
 
 #undef CONFIG_ETHER_PORT_MII	/* use RMII */
@@ -118,38 +118,38 @@
 
 #define CONFIG_SERIAL		"AA000001"
 #define CONFIG_SERVERIP		"10.0.0.79"
-#define CONFIG_ROOTPATH	        "/export/nfs_cpci750/%s"
+#define CONFIG_ROOTPATH		"/export/nfs_cpci750/%s"
 
 #define CONFIG_TESTDRAMDATA	y
-#define CONFIG_TESTDRAMADDRESS  n
+#define CONFIG_TESTDRAMADDRESS	n
 #define CONFIG_TESETDRAMWALK	n
 
 /* ----------------------------------------------------------------------------- */
 
 
-#define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#define	CFG_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
+#define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
+#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#undef	CONFIG_ALTIVEC                  /* undef to disable             */
+#undef	CONFIG_ALTIVEC			/* undef to disable		*/
 
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
 				 CONFIG_BOOTP_BOOTFILESIZE)
 
 
-#define CONFIG_COMMANDS	(CONFIG_CMD_DFL    \
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL	   \
 			 | CFG_CMD_ASKENV  \
-			 | CFG_CMD_I2C     \
+			 | CFG_CMD_I2C	   \
 			 | CFG_CMD_CACHE   \
 			 | CFG_CMD_EEPROM  \
-			 | CFG_CMD_PCI     \
+			 | CFG_CMD_PCI	   \
 			 | CFG_CMD_ELF	   \
 			 | CFG_CMD_DATE	   \
-			 | CFG_CMD_NET     \
-			 | CFG_CMD_PING    \
-			 | CFG_CMD_IDE     \
-			 | CFG_CMD_FAT     \
-			 | CFG_CMD_EXT2    \
+			 | CFG_CMD_NET	   \
+			 | CFG_CMD_PING	   \
+			 | CFG_CMD_IDE	   \
+			 | CFG_CMD_FAT	   \
+			 | CFG_CMD_EXT2	   \
 					)
 
 #define CONFIG_DOS_PARTITION
@@ -159,7 +159,7 @@
 
 #define CONFIG_USE_CPCIDVI
 
-#ifdef  CONFIG_USE_CPCIDVI
+#ifdef	CONFIG_USE_CPCIDVI
 #define CONFIG_VIDEO
 #define CONFIG_VIDEO_CT69000
 #define CONFIG_CFB_CONSOLE
@@ -174,23 +174,23 @@
  */
 #define CFG_I2C_EEPROM_ADDR_LEN 2
 #define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_SPEED   80000		/* I2C speed default */
+#define CFG_I2C_SPEED	80000		/* I2C speed default */
 
 #define CFG_GT_DUAL_CPU			/* also for JTAG even with one cpu */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 
 /*#define CFG_MEMTEST_START	0x00400000*/	/* memtest works on	*/
 /*#define CFG_MEMTEST_END		0x00C00000*/	/* 4 ... 12 MB in DRAM	*/
-/*#define CFG_MEMTEST_END		0x07c00000*/	/* 4 ... 124 MB in DRAM	*/
+/*#define CFG_MEMTEST_END		0x07c00000*/	/* 4 ... 124 MB in DRAM */
 
 /*
 #define CFG_DRAM_TEST
@@ -198,21 +198,21 @@
  *   CFG_DRAM_TEST - enables the following tests.
  *
  *   CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
- *                        Environment variable 'test_dram_data' must be
- *                        set to 'y'.
+ *			  Environment variable 'test_dram_data' must be
+ *			  set to 'y'.
  *   CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
- *                        addressable. Environment variable
- *                        'test_dram_address' must be set to 'y'.
+ *			  addressable. Environment variable
+ *			  'test_dram_address' must be set to 'y'.
  *   CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
- *                        This test takes about 6 minutes to test 64 MB.
- *                        Environment variable 'test_dram_walk' must be
- *                        set to 'y'.
+ *			  This test takes about 6 minutes to test 64 MB.
+ *			  Environment variable 'test_dram_walk' must be
+ *			  set to 'y'.
  */
 #define CFG_DRAM_TEST
 #if defined(CFG_DRAM_TEST)
 #define CFG_MEMTEST_START		0x00400000	/* memtest works on	*/
 /*#define CFG_MEMTEST_END		0x00C00000*/	/* 4 ... 12 MB in DRAM	*/
-#define CFG_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM	*/
+#define CFG_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
 #define CFG_DRAM_TEST_DATA
 #define CFG_DRAM_TEST_ADDRESS
 #define CFG_DRAM_TEST_WALK
@@ -221,10 +221,10 @@
 #define CONFIG_DISPLAY_MEMMAP		/* at the end of the bootprocess show the memory map */
 #undef CFG_DISPLAY_DIMM_SPD_CONTENT	/* show SPD content during boot */
 
-#define	CFG_LOAD_ADDR		0x00300000	/* default load address	*/
+#define CFG_LOAD_ADDR		0x00300000	/* default load address */
 
-#define	CFG_HZ			1000		/* decr freq: 1ms ticks	*/
-#define CFG_BUS_HZ		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)	 	*/
+#define CFG_HZ			1000		/* decr freq: 1ms ticks */
+#define CFG_BUS_HZ		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
 #define CFG_BUS_CLK		CFG_BUS_HZ
 
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
@@ -251,7 +251,7 @@
  * To an unused memory region. The stack will remain in cache until RAM
  * is initialized
 */
-#undef    CFG_INIT_RAM_LOCK
+#undef	  CFG_INIT_RAM_LOCK
 /* #define CFG_INIT_RAM_ADDR	0x40000000*/ /* unused memory region */
 /* #define CFG_INIT_RAM_ADDR	0xfba00000*/ /* unused memory region */
 #define CFG_INIT_RAM_ADDR	0xf1080000 /* unused memory region */
@@ -261,7 +261,7 @@
 
 #define RELOCATE_INTERNAL_RAM_ADDR
 #ifdef RELOCATE_INTERNAL_RAM_ADDR
-/*#define CFG_INTERNAL_RAM_ADDR	0xfba00000*/
+/*#define CFG_INTERNAL_RAM_ADDR 0xfba00000*/
 #define CFG_INTERNAL_RAM_ADDR	0xf1080000
 #endif
 
@@ -270,16 +270,16 @@
  * (Set up by the startup code)
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_SDRAM_BASE		0x00000000
 /* Dummies for BAT 4-7 */
-#define	CFG_SDRAM1_BASE		0x10000000	/* each 256 MByte */
-#define	CFG_SDRAM2_BASE		0x20000000
-#define	CFG_SDRAM3_BASE		0x30000000
-#define	CFG_SDRAM4_BASE		0x40000000
+#define CFG_SDRAM1_BASE		0x10000000	/* each 256 MByte */
+#define CFG_SDRAM2_BASE		0x20000000
+#define CFG_SDRAM3_BASE		0x30000000
+#define CFG_SDRAM4_BASE		0x40000000
 #define CFG_RESET_ADDRESS	0xfff00100
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 #define CFG_MONITOR_BASE	0xfff00000
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 256 kB for malloc */
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 256 kB for malloc */
 
 /*-----------------------------------------------------------------------
  * FLASH related
@@ -289,15 +289,15 @@
 #define CFG_FLASH_CFI		1	   /* Flash is CFI conformant		*/
 #define CFG_FLASH_PROTECTION	1	   /* use hardware protection		*/
 #define CFG_FLASH_USE_BUFFER_WRITE 1	   /* use buffered writes (20x faster)	*/
-#define CFG_FLASH_BASE		0xfc000000 /* start of flash banks              */
+#define CFG_FLASH_BASE		0xfc000000 /* start of flash banks		*/
 #define CFG_MAX_FLASH_BANKS	4	   /* max number of memory banks	*/
-#define CFG_FLASH_INCREMENT     0x01000000 /* size of  flash bank               */
-#define CFG_MAX_FLASH_SECT	128	   /* max number of sectors on one chip	*/
-#define CFG_FLASH_BANKS_LIST  { CFG_FLASH_BASE,                            \
-                                CFG_FLASH_BASE + 1*CFG_FLASH_INCREMENT,    \
-                                CFG_FLASH_BASE + 2*CFG_FLASH_INCREMENT,    \
-                                CFG_FLASH_BASE + 3*CFG_FLASH_INCREMENT }
-#define CFG_FLASH_EMPTY_INFO    1          /* show if bank is empty             */
+#define CFG_FLASH_INCREMENT	0x01000000 /* size of  flash bank		*/
+#define CFG_MAX_FLASH_SECT	128	   /* max number of sectors on one chip */
+#define CFG_FLASH_BANKS_LIST  { CFG_FLASH_BASE,				   \
+				CFG_FLASH_BASE + 1*CFG_FLASH_INCREMENT,	   \
+				CFG_FLASH_BASE + 2*CFG_FLASH_INCREMENT,	   \
+				CFG_FLASH_BASE + 3*CFG_FLASH_INCREMENT }
+#define CFG_FLASH_EMPTY_INFO	1	   /* show if bank is empty		*/
 
 /* areas to map different things with the GT in physical space */
 #define CFG_DRAM_BANKS		4
@@ -308,20 +308,20 @@
 /* Peripheral Device section */
 
 /*******************************************************/
-/* We have on the cpci750 Board :                      */
-/* GT-Chipset Register Area                            */
-/* GT-Chipset internal SRAM 256k                       */
-/* SRAM on external device module                      */
-/* Real time clock on external device module           */
-/* dobble UART on external device module               */
-/* Data flash on external device module                */
-/* Boot flash on external device module                */
+/* We have on the cpci750 Board :		       */
+/* GT-Chipset Register Area			       */
+/* GT-Chipset internal SRAM 256k		       */
+/* SRAM on external device module		       */
+/* Real time clock on external device module	       */
+/* dobble UART on external device module	       */
+/* Data flash on external device module		       */
+/* Boot flash on external device module		       */
 /*******************************************************/
 #define CFG_DFL_GT_REGS		0x14000000				/* boot time GT_REGS */
-#define  CFG_CPCI750_RESET_ADDR	0x14000000				/* After power on Reset the CPCI750 is here */
+#define	 CFG_CPCI750_RESET_ADDR 0x14000000				/* After power on Reset the CPCI750 is here */
 
-#undef 	MARVEL_STANDARD_CFG
-#ifndef 	MARVEL_STANDARD_CFG
+#undef	MARVEL_STANDARD_CFG
+#ifndef		MARVEL_STANDARD_CFG
 /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
 #define CFG_GT_REGS		0xf1000000				/* GT Registers will be mapped here */
 /*#define CFG_DEV_BASE		0xfc000000*/				/* GT Devices CS start here */
@@ -333,11 +333,11 @@
 #define CFG_DEV2_SPACE		0xfe000000				/* DEV_CS2 flash 3     */
 #define CFG_DEV3_SPACE		0xf0000000				/* DEV_CS3 nvram/can   */
 
-#define CFG_BOOT_SIZE		_16M 					/* cpci750 flash 0     */
-#define CFG_DEV0_SIZE		_16M 					/* cpci750 flash 1     */
-#define CFG_DEV1_SIZE		_16M 					/* cpci750 flash 2     */
-#define CFG_DEV2_SIZE		_16M 					/* cpci750 flash 3     */
-#define CFG_DEV3_SIZE		_16M 					/* cpci750 nvram/can   */
+#define CFG_BOOT_SIZE		_16M					/* cpci750 flash 0     */
+#define CFG_DEV0_SIZE		_16M					/* cpci750 flash 1     */
+#define CFG_DEV1_SIZE		_16M					/* cpci750 flash 2     */
+#define CFG_DEV2_SIZE		_16M					/* cpci750 flash 3     */
+#define CFG_DEV3_SIZE		_16M					/* cpci750 nvram/can   */
 
 /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
 #endif
@@ -346,22 +346,22 @@
 #define CFG_DEV0_PAR		0x8FDFFFFF				/* 16 bit flash */
 #define CFG_DEV1_PAR		0x8FDFFFFF				/* 16 bit flash */
 #define CFG_DEV2_PAR		0x8FDFFFFF				/* 16 bit flash */
-#define CFG_DEV3_PAR		0x8FCFFFFF				/* nvram/can    */
+#define CFG_DEV3_PAR		0x8FCFFFFF				/* nvram/can	*/
 #define CFG_BOOT_PAR		0x8FDFFFFF				/* 16 bit flash */
 
-	/*   c    4    a      8     2     4    1      c		*/
-	/* 33 22|2222|22 22|111 1|11 11|1 1  |    |		*/
+	/*   c	  4    a      8	    2	  4    1      c		*/
+	/* 33 22|2222|22 22|111 1|11 11|1 1  |	  |		*/
 	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210	*/
 	/* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100	*/
 	/*  3| 0|.... ..| 2| 4 |  0 |  4 |  8  |  3  | 4	*/
 
 
 /* MPP Control MV64360 Appendix P P. 632*/
-#define CFG_MPP_CONTROL_0	0x00002222	/*                                   */
-#define CFG_MPP_CONTROL_1	0x11110000	/*                                   */
-#define CFG_MPP_CONTROL_2	0x11111111	/*                                   */
-#define CFG_MPP_CONTROL_3	0x00001111     	/*                                   */
-/* #define CFG_SERIAL_PORT_MUX	0x00000102*/	/*                                   */
+#define CFG_MPP_CONTROL_0	0x00002222	/*				     */
+#define CFG_MPP_CONTROL_1	0x11110000	/*				     */
+#define CFG_MPP_CONTROL_2	0x11111111	/*				     */
+#define CFG_MPP_CONTROL_3	0x00001111	/*				     */
+/* #define CFG_SERIAL_PORT_MUX	0x00000102*/	/*				     */
 
 
 #define CFG_GPP_LEVEL_CONTROL	0xffffffff	/* 1111 1111 1111 1111 1111 1111 1111 1111*/
@@ -378,12 +378,12 @@
 				   ECC disable
 				   non registered DRAM */
 				/* 31:26   25:22  21:20 19 18 17 16 */
-				/* 100001 0000   010   0   0   0  0 */
+				/* 100001 0000	 010   0   0   0  0 */
 				/* refresh_count=0x400
 				   phisical interleaving disable
 				   virtual interleaving enable */
 				/* 15 14 13:0 */
-				/* 0  1  0x400 */
+				/* 0  1	 0x400 */
 # define CFG_SDRAM_CONFIG	0x58200400	/* 0x1400  copied from Dink32 bzw. VxWorks*/
 
 
@@ -392,14 +392,14 @@
  *-----------------------------------------------------------------------
  */
 
-#define PCI_HOST_ADAPTER 0              /* configure ar pci adapter     */
-#define PCI_HOST_FORCE  1               /* configure as pci host        */
-#define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
+#define PCI_HOST_ADAPTER 0		/* configure ar pci adapter	*/
+#define PCI_HOST_FORCE	1		/* configure as pci host	*/
+#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
 
-#define CONFIG_PCI                      /* include pci support          */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE  /* select pci host function     */
-#define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
-#define CONFIG_PCI_SCAN_SHOW            /* show devices on bus          */
+#define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
+#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
+#define CONFIG_PCI_SCAN_SHOW		/* show devices on bus		*/
 
 /* PCI MEMORY MAP section */
 #define CFG_PCI0_MEM_BASE	0x80000000
@@ -433,21 +433,21 @@
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
  */
-#undef  CONFIG_IDE_8xx_DIRECT           /* no pcmcia interface required */
-#undef  CONFIG_IDE_LED                  /* no led for ide supported     */
-#define CONFIG_IDE_RESET                /* no reset for ide supported   */
-#define CONFIG_IDE_PREINIT              /* check for units              */
+#undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
+#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
+#define CONFIG_IDE_RESET		/* no reset for ide supported	*/
+#define CONFIG_IDE_PREINIT		/* check for units		*/
 
-#define CFG_IDE_MAXBUS          2               /* max. 1 IDE busses    */
-#define CFG_IDE_MAXDEVICE       (CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */
+#define CFG_IDE_MAXBUS		2		/* max. 1 IDE busses	*/
+#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR       0
-#define CFG_ATA_IDE0_OFFSET     0
-#define CFG_ATA_IDE1_OFFSET     0
+#define CFG_ATA_BASE_ADDR	0
+#define CFG_ATA_IDE0_OFFSET	0
+#define CFG_ATA_IDE1_OFFSET	0
 
-#define CFG_ATA_DATA_OFFSET     0x0000  /* Offset for data I/O                  */
-#define CFG_ATA_REG_OFFSET      0x0000  /* Offset for normal register accesses  */
-#define CFG_ATA_ALT_OFFSET      0x0000  /* Offset for alternate registers       */
+#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
+#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
+#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
 
 
 /*----------------------------------------------------------------------
@@ -551,7 +551,7 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8<<20)	/* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
@@ -563,23 +563,23 @@
 #define CFG_FLASH_LOCK_TOUT	500	/* Timeout for Flash Lock (in ms) */
 
 #if 0
-#define	CFG_ENV_IS_IN_FLASH	0
-#define	CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CFG_ENV_IS_IN_FLASH	0
+#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
 #define CFG_ENV_SECT_SIZE	0x10000
 #define CFG_ENV_ADDR		0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
-/* #define CFG_ENV_ADDR    (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */
+/* #define CFG_ENV_ADDR	   (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */
 #endif
 
 #define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
 #define CFG_EEPROM_PAGE_WRITE_BITS 5
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CFG_I2C_EEPROM_ADDR     0x050
+#define CFG_I2C_EEPROM_ADDR	0x050
 #define CFG_ENV_OFFSET		0x200	/* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE		0x600	/* 2048 bytes may be used for env vars*/
 
 #define CFG_NVRAM_BASE_ADDR	0xf0000000		/* NVRAM base address	*/
 #define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
-#define CFG_VXWORKS_MAC_PTR     (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40)
+#define CFG_VXWORKS_MAC_PTR	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40)
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
@@ -601,7 +601,7 @@
 #if defined (CONFIG_750CX) || defined (CONFIG_750FX)
 #define L2_INIT 0
 #else
-#define L2_INIT  	(L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
+#define L2_INIT		(L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
 			L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 #endif
 
@@ -612,9 +612,9 @@
  *
  * Boot Flags
  */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02		/* Software reboot		    */
 
-#define CFG_BOARD_ASM_INIT      1
+#define CFG_BOARD_ASM_INIT	1
 
 #endif	/* __CONFIG_H */

include/configs/PPChameleonEVB.h

@@ -300,8 +300,6 @@
 #define NAND_ChipID_UNKNOWN	0x00
 #define NAND_MAX_FLOORS 1
 
-
-
 #ifdef NAND_NO_RB
 /* constant delay (see also tR in the datasheet) */
 #define NAND_WAIT_READY(nand) do { \

include/configs/mcc200.h

@@ -229,9 +229,8 @@
 /*
  * GPIO configuration
  */
-//###CHD: MSB = 1 -> 64MB: funktioniert nicht: ERRATA - BUG?
-//###CHD: 0x10000004 = 32MB SDRAM
-//###CHD: 0x90000004 = 64MB SDRAM
+/* 0x10000004 = 32MB SDRAM */
+/* 0x90000004 = 64MB SDRAM */
 #define CFG_GPS_PORT_CONFIG	0x10000004
 
 /*

include/linux/mtd/nand.h

@@ -65,7 +65,6 @@ extern void nand_release (struct mtd_info *mtd);
 extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen);
 
 
-
 /* This constant declares the max. oobsize / page, which
  * is supported now. If you add a chip with bigger oobsize/page
  * adjust this accordingly.