Merge branch 'master' into next

.gitignore

@@ -47,6 +47,9 @@ patches-*
 patches
 series
 
+# gdb files
+.gdb_history
+
 # cscope files
 cscope.*
 

CHANGELOG

@@ -1,3 +1,3547 @@
+commit 635e5f8fc82365e6e9734b3132bc95135a6de679
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun Jan 18 21:37:48 2009 +0100
+
+    Prepare 2009.01-rc3
+
+    Update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4cda437898f7873752f0201757cd33f12196ce87
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Sat Jan 17 13:32:42 2009 -0500
+
+    build system: treat all Darwin's alike
+
+    The x86 based version of Darwin behaves the same quirky way as the powerpc
+    Darwin, so only check HOSTOS when setting up Darwin workarounds.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c088a108c75db565e07292fd668dfa5491e85bc2
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date:	Wed Jan 14 13:52:24 2009 +0100
+
+    fdt_resize(): fix actualsize calculations with unaligned blobs
+
+    The code in fdt_resize() to extend the fdt size to end on a page boundary
+    is wrong for fdt's not located at an address aligned on a page boundary.
+    What's even worse, the code would make actualsize shrink rather than grow
+    if (blob & 0xfff) was bigger than the amount of padding added by ALIGN(),
+    causing fdt_add_mem_rsv to fail.
+
+    Fix it by aligning end address (blob + size) to a page boundary instead.
+    For aligned fdt's this is equivalent to what we had before.
+
+    Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+
+commit fadad1573fb16c90025f08a2861d6047d093cba7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Fri Jan 9 04:38:17 2009 -0500
+
+    ncb: use socklen_t
+
+    The recvfrom() function takes a socklen_t, not an int.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fc83c9273cec6e6e542f4a0ea3b653b7d0513ffa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Jan 11 16:35:16 2009 +0100
+
+    sh: serial: use readx/writex accessors
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9e1fa628bdb64745811cdd26c4f953846c076180
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Jan 11 16:35:15 2009 +0100
+
+    sh: serial: coding style cleanup
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c9935c992575922b7ef13eec0656ed8665d324e3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Jan 11 17:48:56 2009 +0900
+
+    sh: Fix compile error on lowlevel_init file
+
+    lowlevel_init of SH was corrected to use the write/readXX macro.
+    However, there was a problem that was not able to be compiled partially.
+    This patch corrected this.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a5b04d00bfeb940c62232972ce644d50b45797f9
+Author: Kieran Bingham <kieranbingham@gmail.com>
+Date:	Tue Dec 30 01:16:03 2008 +0000
+
+    sh: Fix up rsk7203 target for out of tree build
+
+    Fix up rsk7203 target to build successfully using out-of-tree build.
+
+    Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f7e78f3b74aae9caca2997bad865a72338326c0a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Dec 20 19:29:49 2008 +0100
+
+    sh: use write{8,16,32} in all lowlevel_init
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e4430779623af500de1cee7892c379f07ef59813
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Dec 20 19:29:48 2008 +0100
+
+    sh: lowlevel_init coding style cleanup
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 85cb052ee41675ca361e6a4c69455dc715c8f2d9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Dec 20 15:27:45 2008 +0100
+
+    sh: update sh2/sh2a timer coding style
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1e15ff999322e81af4c0c0c548908f38944ba39c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Dec 20 15:25:22 2008 +0100
+
+    sh: update sh timer coding style
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0e3ece33801e377be67ffa29f083421ad820f28b
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Jan 14 23:26:05 2009 +0100
+
+    Prepare 2009.01-rc2
+
+    Update CHANGELOG.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e92c9a860e44c14513c8909ce4299e253a775eeb
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Jan 14 22:35:30 2009 +0100
+
+    cpu/mpc824x/Makefile: fix warning with parallel builds
+
+    Parallel builds would occasionally issue this build warning:
+
+	ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists
+
+    Use "ln -sf" as quick work around for the issue.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3ba605d4beec649438539e7df97b5fedb26592fb
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Fri Jan 2 12:18:49 2009 +0100
+
+    ppc4xx: Add loadpci command to esd's CPCI4052 and CPCI405AB boards
+
+    This patch adds esd's loadpci BSP command to CPCI4052 and
+    CPCI405AB board. This requires CONFIG_CMD_BSP and CONFIG_PRAM.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 600fe46fb3dab7f07604f9009904f31584415114
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Fri Jan 2 12:18:12 2009 +0100
+
+    ppc4xx: Disable pci node in device tree on CPCI405 pci adapters
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6a1f490d224c600a09137e58d1026d150b8e679
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Fri Jan 2 12:17:36 2009 +0100
+
+    ppc4xx: Cleanup CPCI405 board code
+
+    This patch cleans up CPCI405 board support:
+    - wrap long lines
+    - unification of spaces in function calls
+    - remove dead code
+
+    Use correct io accessors on peripherals.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fceebb45a0b97e92f9889861f8c3b9cb885e706f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Fri Jan 2 12:16:35 2009 +0100
+
+    ppc4xx: Enable auto RS485 mode on PLU405 boards
+
+    This patch turns on the auto RS485 mode in the 2nd external
+    uart on PLU405 boards. This is a special mode of the used
+    Exar XR16C2850 uart. Because these boards only have a 485 physical
+    layer connected it's a good idea to turn it on by default.
+
+    Signed-off-by: Matthias Fuchs <mf@esd.eu>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b5f65dfa9aa8e068e62aba4733dc4fd97b1d9bf6
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Tue Jan 13 16:29:28 2009 -0500
+
+    Some changes of TLB entry setting for MPC8572DS
+
+    - Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode,
+    all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0
+    can not access PIXIS_BASE anymore (any access will cause DataTLBError exception)
+
+    - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board.
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 950264317eb9594b2b5ee2fb65206200a1c6007a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Tue Jan 13 16:29:22 2009 -0500
+
+    Change DDR tlb start entry to CONFIG param for 85xx
+
+    So that we can locate the DDR tlb start entry to the value other than 8. By
+    default, it is still 8.
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 6d3a10f73ece7ffb736890c10e023222612a4aa0
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date:	Fri Jan 9 16:02:35 2009 +0800
+
+    Change PCIE1&2 deciide logic on MPC8544DS board more readable
+
+    The IO port selection for MPC8544DS board:
+     Port			cfg_io_ports
+     PCIE1		0x2, 0x3, 0x4, 0x5, 0x6, 0x7
+     PCIE2		0x4, 0x5, 0x6, 0x7
+     PCIE3		0x6, 0x7
+     This patch changes the PCIE12 and PCIE2 logic more readable.
+    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 028e116811d28a031660f1ad9e20ac1293b3c5c7
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date:	Fri Jan 9 16:01:52 2009 +0800
+
+    PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit
+
+    PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of
+    PCIE1 bit.
+    On MPC8572DS board, PCIE refers to PCIE1.
+    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 9afc2ef0307aecf52482df67c31b75d5f9e66b47
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date:	Fri Jan 9 16:00:55 2009 +0800
+
+    Fix IO port selection issue on MPC8544DS and MPC8572DS boards
+
+    The IO port selection is not correct on MPC8572DS and MPC8544DS board.
+     This patch fixes this issue.
+     For MPC8572
+     Port			cfg_io_ports
+     PCIE1		0x2, 0x3, 0x7, 0xb, 0xc, 0xf
+     PCIE2		0x3, 0x7
+     PCIE3		0x7
+
+    For MPC8544
+    Port			cfg_io_ports
+    PCIE1		0x2, 0x3, 0x4, 0x5, 0x6, 0x7
+    PCIE2		0x4, 0x5, 0x6, 0x7
+    PCIE3		0x6, 0x7
+    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 3e3fffe3baf3befde287fec1fcbfe55052fb8946
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date:	Wed Dec 3 22:36:44 2008 -0600
+
+    mpc8610hpcd: Fix PCI mapping concepts
+
+    Rename _BASE to _BUS, as it's actually a PCI bus address,
+    separate virtual and physical addresses into _VIRT and _PHYS,
+    and use each appopriately.	This makes the code easier to read
+    and understand, and facilitates mapping changes going forward.
+
+    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 79e436cad3b4a7db88408c3f05175028f30d700d
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date:	Wed Dec 3 22:36:26 2008 -0600
+
+    sbc8641d: Fix PCI mapping concepts
+
+    Rename _BASE to _BUS, as it's actually a PCI bus address,
+    separate virtual and physical addresses into _VIRT and _PHYS,
+    and use each appopriately.	This makes the code easier to read
+    and understand, and facilitates mapping changes going forward.
+
+    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit a9f3acbcd07da72b5446ce557531a3ed8b8beff0
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Jan 12 14:50:35 2009 +0100
+
+    MPC86xx: fix build warnings
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 032a1c934ef4dc003281f57302b6e693062c1868
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Mon Jan 5 16:09:44 2009 -0500
+
+    bf537-stamp/nand: fix board_nand_init prototype
+
+    The board_nand_init() function should return an int, not void.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 687f952e4119594ab913be11c90f7f018c2a7a79
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Dec 11 07:04:48 2008 -0500
+
+    Blackfin: drop CONFIG_SPI handling in board init
+
+    The eeprom SPI init functions are duplicated as the common code already
+    executes these for us.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e7e684b10d73a303902208594c7c3e7e0d753282
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Fri Oct 24 17:51:57 2008 -0400
+
+    Blackfin: fix out-of-tree building with ldscripts
+
+    Many of the Blackfin board linker scripts are preprocessed, so make sure we
+    output the linker script into the build tree rather than the source tree.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b9eecc342f767b50e1476fbc1aad7d88dd4ce5eb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Fri Oct 24 17:48:54 2008 -0400
+
+    Blackfin: fix linker scripts to work with --gc-sections
+
+    Make sure all .text sections get pulled in and the entry point is properly
+    referenced so they don't get discarded when linking with --gc-sections.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 509fc553bc6087a6f705b3bf52f3950d7d1eaa58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Sat Oct 11 20:45:44 2008 -0400
+
+    Blackfin: set proper LDRFLAGS for parallel booting LDRs
+
+    In order to boot an LDR out of parallel flash, the ldr utility needs a few
+    flags to tell it to generate the right header.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3dd9395a0d7ce69a335d0e743c04b9caedd681d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Jan 6 21:41:59 2009 +0100
+
+    at91rm9200: move define from lowlevel_init to header
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8a48686fac2030287765f1970ea046bd5734b733
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Jan 3 17:22:26 2009 +0100
+
+    m501sk: move to the common memory setup
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d481c80d78f954133c035dae6c7d22de3625795d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Jan 3 17:22:25 2009 +0100
+
+    at91rm9200: rename lowlevel init value to CONFIG_SYS_
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4e170b16625291aa10d0d9abc3f34e8a5945d157
+Author: Nicolas Ferre <nicolas.ferre@atmel.com>
+Date:	Tue Jan 6 21:13:14 2009 +0100
+
+    at91: add at91sam9xeek board support
+
+    At91sam9xe is basically an at91sam9260 with embedded flash. We can manage
+    it as another entry for at91sam9260 in the Makefile.
+
+    Check documentation at :
+    http://www.atmel.com/dyn/products/product_card.asp?part_id=4263
+
+    Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9ffd53db870a7da134f9a1ae76894a6b31237be5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Jan 6 21:15:57 2009 +0100
+
+    fix bmp_logo.h make dependencies to allow parallel build
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e12d9a8fb48d24176efffccc072b445e60a3afe4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Jan 3 17:22:24 2009 +0100
+
+    at91: Fix Atmel's at91sam9 boards out of tree build
+
+    introduced in commit 89a7a87f084c
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0668236bafaa1c11c521652a2facebc74beecbf0
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 30 22:56:11 2008 +0100
+
+    README: update mailing list name and hits to patch submission.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d9011f9b75561a0bd9254934c2bb2bc799d4f645
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Tue Dec 23 16:32:01 2008 -0600
+
+    85xx: Enable inbound PCI config cycles for X-ES boards cleanup
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 1f03cbfae221b24ba1341a0a3f62ff01c5c874df
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Tue Dec 23 16:32:00 2008 -0600
+
+    XPedite5200 board support cleanup
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fea91edee8ae0295e3c30b1ff544df51f4d668e1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Dec 2 21:58:04 2008 +0100
+
+    usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28
+Author: Trent Piepho <tpiepho@freescale.com>
+Date:	Wed Dec 3 15:16:37 2008 -0800
+
+    mpc8[56]xx: Put localbus clock in sysinfo and gd
+
+    Currently MPC85xx and MPC86xx boards just calculate the localbus frequency
+    and print it out, but don't save it.
+
+    This changes where its calculated and stored to be more consistent with the
+    CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock.
+
+    The localbus frequency is added to sysinfo and calculated when sysinfo is
+    set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are.
+
+    get_clocks() copies the frequency into the global data, as the other
+    frequencies are, into a new field that is only enabled for MPC85xx and
+    MPC86xx.
+
+    checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency
+    from sysinfo, like the other frequencies, instead of calculating it on the
+    spot.
+
+    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9863d6aca11405e1e0d8aba2045d78aeec4d4ee7
+Author: Trent Piepho <tpiepho@freescale.com>
+Date:	Wed Dec 3 15:16:36 2008 -0800
+
+    mpc86xx: Double local bus clock divider
+
+    The local bus clock divider should be doubled for both 8610 and 8641.
+
+    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 446c381e3e16f19857b72ea0d06241267b8b9d58
+Author: Trent Piepho <tpiepho@freescale.com>
+Date:	Wed Dec 3 15:16:35 2008 -0800
+
+    mpc8568: Double local bus clock divider
+
+    The clock divider for the MPC8568 local bus should be doubled, like the
+    other newer MPC85xx chips.
+
+    Since there are now more chips with a 2x divider than a 1x, and any new
+    85xx chips will probably be 2x, invert the sense of the #if so that it
+    lists the 1x chips instead of the 2x ones.
+
+    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit f51f07eb58fad12de9294ba4ee6c09a0ddeaee03
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Tue Dec 16 12:09:27 2008 +0800
+
+    85xx: Fix the boot window issue
+
+    If one custom board is using the 8MB flash, it is set
+    as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000.
+    The current start.S code will be broken at switch_as.
+
+    It is because the TLB1[15] is set as 16MB page size,
+    EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000.
+
+    For the 8MB flash case, the EPN = 0xefxxxxxx,
+    RPN = 0xffxxxxxx. Assume the virt address of switch_as
+    is 0xef7ff18c, the real address of the instruction at
+    switch_as should be 0xff7ff18c. the 0xff7ff18c is out
+    of the range of the default 8MB boot LAW window
+    0xff800000 - 0xffffffff.
+
+    So when we switch to AS1 address space at switch_as,
+    the core can't fetch the instruction at switch_as any
+    more. It will cause broken issue.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 58da8890d5fbd074746037722a423de9ac408616
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date:	Thu Dec 11 15:47:50 2008 -0500
+
+    sbc8548: use proper PHY address
+
+    The values given for the PHY address were wrong, so the code
+    read no valid PHY ID, and fell through to the generic PHY
+    support, which would work on 1000M but would not auto negotiate
+    down to 100M or 10M.
+
+    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit ad22f9273c6f24fbfa917e867680e9688e0c59c5
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date:	Thu Dec 11 15:47:51 2008 -0500
+
+    sbc8548: enable command line editing by default.
+
+    Lets make things a bit more user friendly.	It isn't 1985 anymore.
+
+    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit bd93105fa171184a71ca8b22be03dc2705cfbd3f
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date:	Thu Dec 11 15:47:49 2008 -0500
+
+    sbc8548: don't enable the 3rd and 4th eTSEC
+
+    These interfaces don't have usable connectors on the board, so don't
+    bother enumerating or configuring them.
+
+    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 181a3650113883728927928b3ac81ad6dade4b2c
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Wed Dec 3 10:08:19 2008 -0500
+
+    Set IVPR to kenrel entry point in second core boot page
+
+    Assuming the OSes exception vectors start from the base of kernel address, and
+    the kernel physical starting address can be relocated to an non-zero address.
+    This patch enables the second core to have a valid IVPR for debugger before
+    kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid
+    value for second core which runs kernel at different physical address other
+    than 0x0.
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit a5d212a263c58cc746481bf1fc878510533ce7d6
+Author: Trent Piepho <tpiepho@freescale.com>
+Date:	Wed Dec 3 15:16:34 2008 -0800
+
+    mpc8xxx: LCRR[CLKDIV] is sometimes five bits
+
+    On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits
+    instead of four.
+
+    In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems.  It
+    should be safe as the fifth bit was defined as reserved and set to 0.
+
+    Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV.
+
+    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 58ec4866ed916c7e422f5107bb27b0822084728e
+Author: Trent Piepho <tpiepho@freescale.com>
+Date:	Wed Dec 3 15:16:38 2008 -0800
+
+    mpc8[56]xx: Put localbus clock in device tree
+
+    Export the localbus frequency in the device tree, the same way the CPU, TB,
+    CCB, and various other frequencies are exported in their respective device
+    tree nodes.
+
+    Some localbus devices need this information to be programed correctly, so
+    it makes sense to export it along with the other frequencies.
+
+    Unfortunately, when someone wrote the localbus dts bindings, they didn't
+    bother to define what the "compatible" property should be.	So it seems no
+    one was quite sure what to put in their dts files.
+
+    Based on current existing dts files in the kernel source, I've used
+    "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all
+    of the 85xx devices, and are looked for by the Linux code.	The eLBC is
+    apparently not entirely backward compatible with the pq3 LBC and so eLBC
+    equipped platforms like 8572 won't use pq3-localbus.
+
+    For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems
+    and is also looked for by the Linux code.  On MPC8641, I've also used
+    "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of
+    which don't use "fsl,elbc" or any other acceptable name to match on.
+
+    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9d94aff699eed38b286814fcbb335f3eb8516a0e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Dec 16 14:59:22 2008 -0600
+
+    NAND FSL elbc: Use virt_to_phys to determine which bank is in use
+
+    The current code that determines which bank/chipselect is used for a
+    given NAND instance only worked for 32-bit addresses and assumed
+    a 1:1 mapping.  This breaks in 36-bit physical configs.
+
+    The proper way to handle this is to use the virt_to_phys() and
+    BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address
+    with the the virtual address the NAND code uses.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 77c8115b1f1871811633eae77a5a700fac1f0e50
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Dec 16 14:59:21 2008 -0600
+
+    ppc: Use addrmap in virt_to_phys and map_physmem.
+
+    If we have addr map support enabled use the mapping functions to
+    implement virt_to_phys() and map_physmem().
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Dec 16 14:59:20 2008 -0600
+
+    85xx: Add support to populate addr map based on TLB settings
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 78bbc5ce151c5a484bb51bf1866b4a993ffc16ec
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Dec 1 13:47:13 2008 -0600
+
+    XPedite5200 board support
+
+    Initial support for Extreme Engineering Solutions XPedite5200 -
+    a MPC8548-based PMC single board computer.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 487dcb4fb89be0992bc06ec1341090017bd9cf2f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Oct 29 12:39:27 2008 -0500
+
+    85xx: Enable inbound PCI config cycles for X-ES boards
+
+    Update X-ES Freescale boards to allow inbound PCI configuration
+    cycles when configured as agent/endpoint.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ccf0fdd02b97323f8caae18d06cc9daeac2f192f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Dec 17 16:36:23 2008 -0600
+
+    XPedite5370 board support
+
+    Initial support for Extreme Engineering Solutions XPedite5370 -
+    a MPC8572-based 3U VPX single board computer with a PMC/XMC
+    site.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e92739d34e2d6b6aca93b2598248210710897ce8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Dec 17 16:36:21 2008 -0600
+
+    Add support for PCA953x I2C gpio devices
+
+    Initial support for NXP's 4 and 8 bit I2C gpio expanders
+    (eg pca9537, pca9557, etc). The CONFIG_PCA953X define
+    enables support for the devices while the CONFIG_CMD_PCA953X
+    define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
+    define enables an 'info' sub-command which provides summary
+    information for the given pca953x device.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 7a8979591171676417ab36852d8811a8c46accd8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Oct 29 12:39:26 2008 -0500
+
+    pci/fsl_pci_init: Enable inbound PCI config cycles
+
+    Add fsl_pci_config_unlock() function to enable a
+    PCI/PCIe interface configured in agent/endpoint mode to
+    respond to inbound PCI configuration cycles.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b616f2b545f73757669b37386f0b37bb61fc6797
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Mon Sep 8 22:27:18 2008 +0200
+
+    MIPS: qemu_mips: update doc to generate and to use qemu flash, ide file
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 16cdf816779f5b602a9b3b4d2ea4dea05095c35b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Dec 16 22:10:31 2008 +0100
+
+    MIPS: qemu_mips: update doc to use all disk and boot linux kernel
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 13095b2f07dacb1f863772266c1789d47a523a8a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Dec 16 22:10:30 2008 +0100
+
+    MIPS: qemu_mips: move env storage just after u-boot
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit aced78d852d0b009e8aaa1445af8cb40861ee549
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 23:48:27 2008 +0100
+
+    Prepare 2009.01-rc1
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 23:13:46 2008 +0100
+
+    include/configs/at91cap9adk.h: fix typo.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 45ca04f2377361593151d2d4da51f8ba4832d233
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 22:32:25 2008 +0100
+
+    board/trab/memory.c: Fix compile problems.
+
+    Apply changes from commit 44b4dbed to board/trab/memory.c, too.
+
+    Actually we'd need a major cleanup here - as it turns out,
+    board/trab/memory.c is more or less a verbatim copy of
+    post/drivers/memory.c ... but then, trab is EOL anyway,r
+    so this is not worth the effort.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ff49ea8977b56916edd5b1766d9939010e30b181
+Author: Scott Wood <scottwood@freescale.com>
+Date:	Tue Dec 16 14:24:16 2008 -0600
+
+    NAND: Mark the BBT as scanned prior to calling scan_bbt.
+
+    Otherwise, recursion can occur if scan_bbt does not find a bad block
+    table, and tries to write one, and the attempt to erase the BBT area
+    causes a bad block check.
+
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 584eedab66d0828f2d571a24b10526c4e65f547b
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Dec 11 05:51:57 2008 +0300
+
+    jffs2: include <linux/mtd/compat.h> instead of defining own min_t
+
+    Include <linux/mtd/compat.h> header for min_t definition instead of
+    providing our own one. Removes warnings in case of OneNAND support
+    enabled.
+
+    Although I thinks it's a bit silly to include <linux/mtd/compat.h>
+    just for min_t...
+
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+    Acked-by: Stefan Roese <sr@denx.de>
+
+commit b1ffecec37b57a59c139042267faac458e5324e9
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date:	Wed Dec 3 23:04:37 2008 -0600
+
+    powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
+
+    Casting a pointer to a phys_addr_t when it's an unsigned long long
+    on a 32-bit system without first casting to a non-pointer type
+    generates a compiler warning. Fix this.
+
+    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 6cdadcb3f1b6eac4a1c4256acaa1438413f95351
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 16:22:50 2008 +0100
+
+    trab: make trab_fkt standalone code independent of libgcc
+
+    Use our own local functions in lib_arm/ instead.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit aa1bcca3d2e22af4dea9f02132f9b56a30378ded
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 14:44:06 2008 +0100
+
+    post/Makefile: fix dependency problem with parallel builds
+
+    Parallel builds (using "make -jN") would occasionally fail with error
+    messages like
+	ppc_4xxFP-objdump: string.o: File format not recognized
+    or
+	post/libpost.a(cpu.o): In function `cpu_post_test':
+	/home/wd/git/u-boot/work/post/lib_ppc/cpu.c:130: undefined reference to `cpu_post_test_string'
+    or similar. We now make sure to run the 'postdeps" step before
+    attempting to build the specific POST libraries.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4a0f7538c5c0805fd9a791967bbabacc41deadd9
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 14:41:02 2008 +0100
+
+    Makefile: fix dependency problem with parallel builds
+
+    Parallel builds (using "make -jN") would occasionally fail with error
+    messages like
+	include/autoconf.mk:212: *** missing separator.  Stop.
+    Line numbers and affected boards were changing. Obviously some
+    Makefiles included autoconf.mk while it was still being written to.
+    As a fix, we now write to a temporary file first and then rename it,
+    so that it is really ready to use as soon as it appears.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 455ae7e87f67c44e6aea68865c83acadd3fcd36c
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 01:02:17 2008 +0100
+
+    Coding style cleanup, update CHANGELOG.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 84bc72d90c505fec3ef4b693995407a0bd4064e5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Dec 11 18:39:08 2008 -0500
+
+    spi/stmicro: fix debug() display of cmd
+
+    The stmicro_wait_ready() func tries to show the actual opcode that was sent
+    to the device, but instead it displays the array pointer.  Fix it to pull
+    out the opcode from the start of the array.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Dec 11 06:23:37 2008 -0500
+
+    env_sf: support embedded environments
+
+    If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect
+    size is larger than the env size, then it means the env is embedded in a
+    block.  So we have to save/restore the part of the sector which is not the
+    environment.  Previously, saving the environment in SPI flash in this
+    setup would probably brick the board as the rest of the sector tends to
+    contain actual U-Boot data/code.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+    Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d
+Author: Timur Tabi <timur@freescale.com>
+Date:	Wed Dec 3 11:28:30 2008 -0600
+
+    i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
+
+    All implementations of the functions i2c_reg_read() and
+    i2c_reg_write() are identical. We can save space and simplify the
+    code by converting these functions into inlines and putting them in
+    i2c.h.
+
+    Signed-off-by: Timur Tabi <timur@freescale.com>
+    Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e39cd81c44740d7355d277ed3d38536cbe1e003d
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Fri Dec 5 15:36:14 2008 +0800
+
+    lib_ppc: rework the flush_cache
+
+    - It is possible to miss flush/invalidate the last
+      cache line, we fix it at here.
+    - add the volatile and memory clobber.
+
+    They are pointed by Scott Wood.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Sat Dec 13 17:20:28 2008 -0600
+
+    Introduce addr_map library
+
+    Add a library that helps in translating between virtual and physical
+    addresses.	This library can be useful as a simple means to implement
+    map_physmem() and virt_to_phys() for platforms that need functionality
+    beyond the simple 1:1 mapping.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 65e43a10631537dcb92c302d36301a12308216c3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Sat Dec 13 17:20:27 2008 -0600
+
+    Introduce virt_to_phys()
+
+    virt_to_phys() returns the physical address given a virtual. In most
+    cases this will be just the input value as the vast majority of
+    systems run in a 1:1 mode.
+
+    However in systems that are not running this way it should report the
+    physical address or ~0 if no mapping exists for the given virtual
+    address.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 45845301af3de8675c1f7bbc815c6de35452605a
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date:	Sun Dec 7 22:12:50 2008 +0100
+
+    POST Make: fix the sub-dir dependencies missing.
+
+    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 22525779cb51f1bbe4e96fea7b778de1935a5a69
+Author: Martin Michlmayr <tbm@cyrius.com>
+Date:	Wed Aug 6 14:44:05 2008 +0300
+
+    Fix a typo in fw_env.config
+
+    Reported-by: Martin Michlmayr <tbm@cyrius.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ba490b7761c62b549c222a9723e532dc801a3899
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Dec 1 16:22:45 2008 -0600
+
+    Remove unused CONFIG_ADDR_STREAMING defines
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit d16da93430520d3e46c1ab52eedacf36ab7a2311
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Nov 24 11:54:47 2008 -0600
+
+    cmd_mem: Remove unused variable
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Dec 14 10:29:39 2008 +0100
+
+    Fix new found CFG_
+
+    Also fix some minor typos.
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0e0c862efe7279e9609db74d758cd1b84c6c7209
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date:	Fri Sep 19 12:07:34 2008 +0200
+
+    Remove compiler warning: target CPU does not support interworking
+
+    This warning is issued by modern ARM-EABI GCC on non-thumb targets.
+
+    Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
+    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Mon Nov 24 13:33:51 2008 +0100
+
+    Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent
+
+    FDT support is used for both FIT style images and for architectures
+    that can pass a fdt blob to an OS (ppc, m68k, sparc).
+
+    For other architectures and boards which do not pass a fdt blob to an
+    OS but want to use the new uImage format, we just need FIT support.
+
+    Now we can have the 4 following configurations :
+
+    1) FIT only		    CONFIG_FIT
+    2) fdt blob only	    CONFIG_OF_LIBFDT
+    3) both		    CONFIG_OF_LIBFDT & CONFIG_FIT
+    4) none		    none
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Wed Dec 10 15:13:32 2008 +0100
+
+    ppc4xx: Disable EEPROM write access on PMC440 boards
+
+    This patch disables EEPROM wrtie access by default on PMC440 board.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Wed Dec 10 15:12:56 2008 +0100
+
+    ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 71fa0714fe5134bc8718c38d5261d267e88582ba
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Nov 18 16:36:12 2008 +0100
+
+    MIPS: Flush data cache upon relocation
+
+    This patch now adds a flush to the data cache upon relocation. The
+    current implementation is missing this. Only a comment states that it
+    should be done. So let's really do it now.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 44174343688dba32571a34550dba08971c65fef1
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Nov 18 16:36:22 2008 +0100
+
+    MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT
+
+    This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This
+    enables support for boards where the lowlevel initialization is
+    already done when U-Boot runs (e.g. via OnChip ROM).
+
+    This will be used in the upcoming VCTH board support.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit db08ecaa6eb8176904b3bae103a85ee8f735dc40
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Nov 12 13:18:02 2008 +0100
+
+    MIPS: Add board_early_init_f() to init_sequence
+
+    This patch adds the board_early_init_f() call to the MIPS init
+    sequence. A weak dummy implementation is also added which can be
+    overridden by a board specific version.
+
+    This will be used by the upcoming VCTH board support.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Nov 12 13:18:19 2008 +0100
+
+    MIPS: Add onenand_init() to board.c and move nand_init()
+
+    This patch adds a call to onenand_init() for OneNAND support and moves
+    the nand_init() call to an earlier place, so that the environment can
+    be used from NAND and OneNAND.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d8bbc51c7ba9b737a20984333d19fe28a3526431
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Tue Dec 9 11:32:46 2008 +0900
+
+    sh: Update sh2/sh2a timer
+
+    Renesas SH2/SH2A timer broken.
+    This patch fix timer function.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a319f1496210117b73198e3d889ffffaf6825d00
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Dec 5 07:27:37 2008 +0100
+
+    sh: r2dplus fix register access
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Dec 2 07:40:03 2008 +0100
+
+    sh: r2dplus/lowlevel_init: coding style fix
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Tue Nov 25 11:05:19 2008 +0900
+
+    sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT
+
+    SH4 is different a value of CACHE_OC_NUM_ENTRIES and
+    CACHE_OC_WAY_SHIFT every CPU.
+    This patch corrects these values.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e9d5f35497885b3c65d494d09a525d443dcccd3b
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Thu Nov 20 16:44:42 2008 +0900
+
+    sh: Update sh timer function
+
+    Change to write/readX function and fix timer problem.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b81786cff476c41e332eaeb679158f6527cd67d4
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Tue Nov 4 11:58:58 2008 +0900
+
+    sh: Migo-R: Update BSC value
+
+    A value of BSC CS4 was wrong, Fixed it.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 5783758fd260a02f44566ad8f29f899565cd0403
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Mon Nov 17 16:52:09 2008 +0900
+
+    sh: Update ms7722se board config
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Mon Nov 17 16:53:09 2008 +0900
+
+    sh: Update SuperH serial driver
+
+    The address of SCFSR register is wrong at SH7720/SH7721.
+    This patch fix this.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9a1d3557dcd47365c12eeab584b822e57d994352
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Nov 11 22:20:15 2008 +0100
+
+    sh: fix rsk7203 and MigoR out of tree build
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1951f847f0a851853871b613ad7cf21a5242226c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Wed Dec 10 14:41:25 2008 +0100
+
+    ppc4xx: Update TEXT_BASE for CPCI405 boards
+
+    This patch fixes building U-Boot for CPCI405 boards.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Dec 9 20:08:01 2008 +0100
+
+    ppc4xx: Remove some features from ALPR to fit into 256k again
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3b089e4f889a2902449d55e081c886ae607cae89
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Dec 10 10:32:59 2008 +0100
+
+    UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization
+
+    With this patch we set the type back to NONE upon failing UBI partition
+    initialization. Otherwise further calls to the UBI subsystem would try
+    to really access the non-existing UBI partition.
+
+    Thanks to Michael Lawnick for pointing this out.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 817329351639a8895cd9b87b33aeff043f3d5a44
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Dec 10 10:28:33 2008 +0100
+
+    UBI: Return -ENOMEM upon failing malloc
+
+    Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
+    failing malloc().
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Tue Dec 9 23:34:15 2008 -0800
+
+    Fix compile error in building MBX860T.
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee
+Author: Michal Simek <monstr@monstr.eu>
+Date:	Tue Nov 25 11:42:20 2008 +0100
+
+    microblaze: Remove XUPV2P board
+
+    ---
+
+    Microblaze platforms use generic settings and to have
+    many platforms is confusing that's why I decided to remove this
+    platform from U-BOOT. ml401 tree is sufficient for covering
+    all Microblaze platforms.
+
+    This change will go through microblaze custodian tree.
+
+commit 99ba6f353582720defff6e6e6761dc455a207d31
+Author: Michal Simek <monstr@monstr.eu>
+Date:	Mon Nov 24 18:25:41 2008 +0100
+
+    microblaze: Remove CONFIG_LIBFDT due to error in common files
+
+commit e7d591e823a991513833af7030468409e25a3b13
+Author: Michal Simek <monstr@monstr.eu>
+Date:	Mon Nov 24 11:43:00 2008 +0100
+
+    microblaze: Fix ml401 uart16550 setting
+
+    Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39
+Author: Michal Simek <monstr@monstr.eu>
+Date:	Mon Nov 24 11:38:22 2008 +0100
+
+    microblaze: Set up relocation is done
+
+commit bcb6dd9187d4b23c748704767bd12d20c829e996
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Tue Dec 9 23:20:31 2008 -0500
+
+    tools/netconsole: new script for working with netconsole over UDP
+
+    While the doc/README.NetConsole does have a snippet for people to
+    create their own netcat script, it's a lot easier to make a simple
+    dedicated script and tell people to use it.
+
+    Also spruce it up a bit to make it user friendly.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0
+Author: Sonic Zhang <Sonic.Zhang@analog.com>
+Date:	Tue Dec 9 23:20:18 2008 -0500
+
+    fs/fat: handle FAT on SATA
+
+    The FAT file system driver should also handle FAT on SATA devices.
+
+    Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date:	Mon Nov 24 08:15:02 2008 -0500
+
+    libfdt: Fix redefined uintptr_t warning for USE_HOSTCC
+
+    Compiling U-Boot in an old OS environment (RedHat-7.3  :-)	gives the
+    following warnings from FDT:
+
+    include/libfdt_env.h:50: warning: redefinition of 'uintptr_t'
+    /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here
+
+    Fix: Protect the definition of uintptr_t when compiling on the host
+    system.
+
+    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date:	Sat Nov 22 08:43:29 2008 +1100
+
+    Moved sc520 PCI definitions to stand-alone file
+
+    Signed Off By: Graeme Russ <graeme.russ@gmail.com>
+
+commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date:	Sat Nov 22 08:43:21 2008 +1100
+
+    Fixed path to sc520 SSI include file
+
+    Signed Off By: Graeme Russ <graeme.russ@gmail.com>
+
+commit d4f70da544c33db3e4fce6473dea4ecca4322545
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date:	Fri Nov 21 06:28:05 2008 +1100
+
+    Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c
+
+    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit c034075a713b60e654c64e88e87da29440f31bb4
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Nov 12 13:30:10 2008 +0100
+
+    serial: Add vcth UART driver
+
+    This patch adds the UART driver for the upcoming VCTH board support.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 142a80ffc3b537a9c45acd2444a42a77f147c602
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Nov 13 19:49:36 2008 +0300
+
+    jffs2: cache data_crc results
+
+    As we moved data_crc() invocation from jffs2_1pass_build_lists() to
+    jffs2_1pass_read_inode() data_crc is going to be calculated on each
+    inode access. This patch adds caching of data_crc() results. There
+    is no significant improvement in speed (because of flash access
+    caching added in previous patch I think, crc in RAM is really fast)
+    but this patch impacts memory usage -- every b_node structure uses
+    12 bytes instead of 8.
+
+    Signed-off-by: Alexey Neyman <avn@emcraft.com>
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 9b7076229ec6a958bd835ab70745f7676297ce82
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Nov 13 19:49:35 2008 +0300
+
+    jffs2: summary support
+
+    This patch adds support for reading fs information from summary
+    node instead of scanning full eraseblock.
+
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 70741004dc28946cd82c7af6789c4ddb3fc94526
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Nov 13 19:49:34 2008 +0300
+
+    jffs2: add buffer to cache flash accesses
+
+    With this patch JFFS2 code allocates memory buffer of max_totlen size
+    (size of the largest node, calculated during scan time) and uses it to
+    store entire node. Speeds up loading. If malloc fails we use old ways
+    to do things.
+
+    Signed-off-by: Alexey Neyman <avn@emcraft.com>
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 8a36d31f72411144ac0412ee7e1880e801acd754
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Nov 13 19:49:33 2008 +0300
+
+    jffs2: rewrite jffs2 scanning code based on Linux one
+
+    Rewrites jffs2_1pass_build_lists() function in style of Linux's
+    jffs2_scan_medium() and jffs2_scan_eraseblock().
+    This includes:
+     - Caching flash acceses
+     - Smart dealing with free space
+
+    Signed-off-by: Alexey Neyman <avn@emcraft.com>
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Nov 13 19:49:32 2008 +0300
+
+    jffs2: add sector_size field to part_info structure
+
+    This patch adds sector_size field to part_info structure (used
+    by new JFFS2 code).
+
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit f73846956778a7dfee83403ef9747aff77198848
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Nov 13 19:49:31 2008 +0300
+
+    jffs2: fix searching for latest version in jffs2_1pass_list_inodes()
+
+    We need to update i_version inside cycle to find really latest version
+    inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside
+    dump_inode() instead of calling expensive jffs2_1pass_read_inode().
+
+    Signed-off-by: Alexey Neyman <avn@emcraft.com>
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 9 23:13:51 2008 +0100
+
+    evb64260: fix "cast to pointer from integer of different size" warnings
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d2776827315c3d469b8cb4cec14d58877798daa2
+Author: Stefan Althoefer <stefan.althoefer@web.de>
+Date:	Sun Dec 7 19:39:11 2008 +0100
+
+    USB: descriptor handling
+
+    Hi,
+
+    I found a bug when working with the u-boot USB subsystem on IXP425 processor
+    (big endian Xscale aka ARMv5).
+    I recognized that the second usb_endpoint_descriptor of the attached memory
+    stick was corrupted.
+
+    The reason for this are the packed structures below (either u-boot and
+    u-boot-usb):
+
+    --------------
+    /* Endpoint descriptor */
+    struct usb_endpoint_descriptor {
+	unsigned char  bLength;
+	unsigned char  bDescriptorType;
+	unsigned char  bEndpointAddress;
+	unsigned char  bmAttributes;
+	unsigned short wMaxPacketSize;
+	unsigned char  bInterval;
+	unsigned char  bRefresh;
+	unsigned char  bSynchAddress;
+
+    } __attribute__ ((packed));
+    /* Interface descriptor */
+    struct usb_interface_descriptor {
+	unsigned char  bLength;
+	unsigned char  bDescriptorType;
+	unsigned char  bInterfaceNumber;
+	unsigned char  bAlternateSetting;
+	unsigned char  bNumEndpoints;
+	unsigned char  bInterfaceClass;
+	unsigned char  bInterfaceSubClass;
+	unsigned char  bInterfaceProtocol;
+	unsigned char  iInterface;
+
+	unsigned char  no_of_ep;
+	unsigned char  num_altsetting;
+	unsigned char  act_altsetting;
+	struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
+    } __attribute__ ((packed));
+    ------------
+
+    As usb_endpoint_descriptor is only 7byte in length, the start of all
+    odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize
+    of these structures also not word aligned.
+
+    ARMv5 Architecture however does not support non-aligned multibyte
+    data type (see A2.8 of ARM Architecture Reference Manual).
+
+    Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
+    Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Dec 9 10:27:33 2008 -0600
+
+    drivers/fsl_pci_init: Fix compile warning
+
+    fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows':
+    fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type
+
+    The check only makes sense if we are CONFIG_PHYS_64BIT
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dedacc18a8c2b3951581eb721fa055a4e0ac4845
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Dec 7 09:45:35 2008 +0100
+
+    usbtty/omap: update to current API
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Tue Dec 9 17:52:05 2008 +0100
+
+    video: fix FADS823 and RRvision compiling issues
+
+    Since commit 561858ee building for FADS823 and RRvision
+    doesn't work. Let's include version.h and timestamp.h
+    unconditionally to fix the problem.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 2d2e05727fe4013f807ffa814dff0e75259a1db4
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Dec 2 10:53:47 2008 +0100
+
+    UBI: Fix size parsing in "ubi create"
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu Nov 27 14:07:09 2008 +0100
+
+    UBI: Enable re-initializing of the "ubi part" command
+
+    With this patch now, the user can call "ubi part" multiple times to
+    re-connect the UBI device to another MTD partition.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu Nov 27 14:05:15 2008 +0100
+
+    MTD: Fix problem based on non-working relocation (list head mtd_partitions)
+
+    Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon
+    first call of add_mtd_partitions(). Otherwise this won't work on platforms
+    where the relocation is broken (like MIPS or PPC).
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47
+Author: Trent Piepho <tpiepho@freescale.com>
+Date:	Wed Nov 12 17:29:48 2008 -0800
+
+    Section name should be ".data", not "data"
+
+    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 9 00:39:08 2008 +0100
+
+    MAKEALL: Automatically use parallel builds
+
+    Add logic to the MAKEALL script to determine the number of CPU cores
+    on the system, and run a parallel build if there is more than one.
+    Usually this significantrly accelerates builds.
+
+    Allow to manually adjust the number of parallel make jobs by using
+    the "BUILD_NCPUS" environment variable.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 268405fa7c44156c5192a70779920c70906af8d6
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 9 00:24:30 2008 +0100
+
+    vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 153176a9414120ca1736f3cc4951623d6e14e6af
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Nov 11 06:08:59 2008 +0100
+
+    avr32/bootm: remove unused variable 'ret'
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Nov 12 13:06:48 2008 -0600
+
+    Remove unneeded CONFIG_SHELL references
+
+    Make should be using the bash shell by default which makes
+    CONFIG_SHELL unnecessary
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit cf7a7b99794bac936899819b95539be1dbd71708
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Nov 12 12:33:20 2008 -0600
+
+    Use bash for default GNU Make shell application
+
+    Some Make script commands rely on bash-specific features like brace
+    expansion, so default to bash for the SHELL variable with a fallback
+    to the standard sh shell
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 4b530018764934ad5689196e9aa5714a6f4d1a6c
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Nov 12 09:50:45 2008 +0100
+
+    jffs2: rename devices_init () in common/jffs2.c
+
+    rename devices_init () in common/jffs2.c to
+    jffs2_devices_init (), because there is also a
+    devices_init () in common/devices.c.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit af5eb847a10f1037590001355d88bab3fe7be48b
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date:	Mon Nov 10 12:46:20 2008 +0000
+
+    SPARC: Fixed compiler error introduced by commit c160a9544743
+
+    This patch fixes a build error for the SPARC platform. It was
+    introduced by commit c160a9544743e80e8889edb2275538e7764ce334.
+
+    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 4c60259899aa00f59db0d936b8807f9a26411c0f
+Author: Gary Jennejohn <garyj@denx.de>
+Date:	Sun Nov 9 12:50:59 2008 +0100
+
+    mgsuvd add the board-specific part of the HDLC driver
+
+    Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70
+Author: Gary Jennejohn <garyj@denx.de>
+Date:	Sun Nov 9 12:45:03 2008 +0100
+
+    mgcoge add the board-specific part of the HDLC driver
+
+    Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 135f5534538bb8ea4f38a7030da12187d22ef7e0
+Author: Gary Jennejohn <garyj@denx.de>
+Date:	Sun Nov 9 12:36:15 2008 +0100
+
+    keymile add the common parts of the HDLC driver
+
+    This implements the ICN protocol used across the backplane and is
+    needed by all the keymile boards.
+
+    Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Nov 7 22:46:22 2008 +0100
+
+    drivers/bios_emulator: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date:	Thu Nov 6 14:01:51 2008 -0500
+
+    common/cmd_ide.c: Corrected endian order printing for compact flash serial number.
+
+    Corrected endian order printing for compact flash serial number.
+
+    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 16a28ef219c27423a1ef502f19070c4d375079b8
+Author: Gary Jennejohn <garyj@denx.de>
+Date:	Thu Nov 6 15:04:23 2008 +0100
+
+    IOMUX: Add console multiplexing support.
+
+    Modifications to support console multiplexing.  This is controlled using
+    CONFIG_SYS_CONSOLE_MUX in the board configuration file.
+
+    This allows a user to specify multiple console devices in the environment
+    with a command like this: setenv stdin serial,nc.  As a result, the user can
+    enter text on both the serial and netconsole interfaces.
+
+    All devices - stdin, stdout and stderr - can be set in this manner.
+
+    1) common/iomux.c and include/iomux.h contain the environment setting
+    implementation.
+    2) doc/README.iomux contains a somewhat more detailed description.
+    3) The implementation in (1) is called from common/cmd_nvedit.c to
+    handle setenv and from common/console.c to handle initialization of
+    input/output devices at boot time.
+    4) common/console.c also contains the code needed to poll multiple console
+    devices for input and send output to all devices registered for output.
+    5) include/common.h includes iomux.h and common/Makefile generates iomux.o
+    when CONFIG_SYS_CONSOLE_MUX is set.
+
+    Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Tue Nov 4 16:03:46 2008 -0500
+
+    strings: use puts() rather than printf()
+
+    When running `strings` on really long strings, the stack tends to get
+    smashed due to printf().  Switch to puts() instead since we're only passing
+    the data through.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b03150b52e3c491a86a3cc0945274f0e8f9872e7
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date:	Mon Nov 3 22:16:18 2008 +0100
+
+    Use new CONFIG_SYS_VXWORKS parameters for Netstal boards
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date:	Mon Nov 3 22:15:34 2008 +0100
+
+    cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters
+
+    - fix size too small by one in sprintf
+    - changed old (pre 2004) device name ibmEmac to emac
+    - boot device may be overriden in board config
+    - servername may be defined in board config
+    - additional parameters may be defined in board config
+    - fixed some line wrappings
+    - replaced	redundant MAX define by max
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit e9084b23d16102f44ace24379a1c0c352497ef80
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date:	Mon Nov 3 22:14:36 2008 +0100
+
+    Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date:	Mon Nov 3 22:13:47 2008 +0100
+
+    README: Document CONFIG_SYS parameters for vxworks
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit ace514837cac656e29c37a19569cb8ea83071126
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Fri Oct 31 11:12:38 2008 -0500
+
+    lcd: Let the board code show board-specific info cleanup
+
+    remove unneeded version.h from lcd.c
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Nov 3 09:30:59 2008 -0600
+
+    Update U-Boot's build timestamp on every compile
+
+    Use the GNU 'date' command to auto-generate a new U-Boot
+    timestamp on every compile.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 83ad179e2f0f625b88adb8ef5696709e46fb9077
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Thu Dec 4 22:25:57 2008 +0100
+
+    Remove redundant armv4 flag from arm926ejs compile flags
+
+    Currently the arm926ejs tree has the armv4 option set during compilation.
+    This flag does not belong here because a arm926 CPU is always a armv5 CPU.
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 89a7a87f084c657f8e32b513a77b50eca07e17ec
+Author: Nicolas Ferre <nicolas.ferre@atmel.com>
+Date:	Sat Dec 6 13:11:14 2008 +0100
+
+    at91: Choose environment variables location within make config target
+
+    This patch adds the possiblity to choose the media where the environment will
+    be located. This allow to choose this fundamental configuration without editing
+    config files.
+
+    Documentation file added.
+
+    Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+    Acked-by: Stelian Pop <stelian@popies.net>
+    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1450c4a6682378567030414a9f1198c39b7730c7
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Mon Nov 3 15:30:34 2008 +0100
+
+    lwmon, tqm8xx: Fix build errors
+
+    Commit 6b59e03e0237a40a2305ea385defdfd92000978b
+    lcd: Let the board code show board-specific info
+
+    introduced some bugs which prevent U-Boot building
+    for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will
+    be defined in the board configuration.
+
+    Also "LCD enabled" building for TQM823L doesn't work
+    since this commit.
+
+    This patch fixes above-mentioned issues.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Sun Nov 2 01:18:18 2008 -0400
+
+    ignore .gdb_history files
+
+    When using gdb, history files will often get generated.  So ignore them.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Oct 31 12:26:55 2008 +0100
+
+    FPGA: move fpga drivers to drivers/fpga
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Dec 1 16:29:38 2008 -0600
+
+    net: Fix TftpStart() ip:filename bug
+
+    The TftpStart() function modifies the 'BootFile'
+    string when 'BootFile' contains both an IP address
+    and filename (eg 1.2.3.4:/path/file). This causes
+    subsequent calls to TftpStart to incorrectly parse
+    the TFTP filename and server IP address to use.
+    For example:
+
+    => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant
+    Speed: 100, half duplex
+    Using eTSEC1 device
+    TFTP from server 10.52.0.62; our IP address is 10.52.253.79
+		     ^^^^^^^^^^ CORRECT
+    Filename '/home/ptyser/non_existant'.
+	      ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT
+    Load address: 0x100000
+    Loading: *
+    TFTP error: 'File not found' (1)
+    Starting again
+
+    eTSEC2: No link.
+    Speed: 100, half duplex
+    Using eTSEC1 device
+    TFTP from server 10.52.0.33; our IP address is 10.52.253.79
+		     ^^^^^^^^^^ WRONG
+    Filename '10.52.0.62'.
+	      ^^^^^^^^^^ WRONG
+    Load address: 0x100000
+    Loading: *
+    TFTP error: 'File not found' (1)
+    Starting again
+
+    TftpStart() was modified to not modify the 'BootFile' string.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d32c5be50bf0600bfdc54223ef341ee9c63db445
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Dec 1 16:26:21 2008 -0600
+
+    net: Add additional IP fragmentation check
+
+    Ignore IP packets which have the "more fragments" flag bit
+    set.  This flag indicates the IP packet is fragmented and
+    must be ignored by U-Boot.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Dec 1 16:26:20 2008 -0600
+
+    net: Define IP flag field values
+
+    These defines were pulled from the "Add simple
+    IP/UDP fragmentation support" patch from Frank
+    Haverkamp <haver@vnet.ibm.com>.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 23afaba65ec5206757e589ef334a8b38168c045f
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Tue Dec 2 10:31:04 2008 +0100
+
+    net: tsec: Fix Marvell 88E1121R phy init
+
+    This patch tries to ensure that phy interrupt pin
+    won't be asserted after booting. We experienced
+    following issues with current 88E1121R phy init:
+
+    Marvell 88E1121R phy can be hardware-configured
+    to share MDC/MDIO and interrupt pins for both ports
+    P0 and P1 (e.g. as configured on socrates board).
+    Port 0 interrupt pin will be shared by both ports
+    in such configuration. After booting Linux and
+    configuring eth0 interface, port 0 phy interrupts
+    are enabled. After rebooting without proper eth0
+    interface shutdown port 0 phy interrupts remain
+    enabled so any change on port 0 (link status, etc.)
+    cause assertion of the interrupt. Now booting Linux
+    and configuring eth1 interface will cause permanent
+    phy interrupt storm as the registered phy 1 interrupt
+    handler doesn't acknowledge phy 0 interrupts. This
+    of course should be fixed in Linux driver too.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Tue Dec 2 12:59:51 2008 -0600
+
+    net: Fix download command parsing
+
+    When CONFIG_SYS_HUSH_PARSER is defined network download
+    commands with 1 argument in the format 'tftp "/path/file"'
+    do not work as expected. The hush command parser strips
+    the quotes from "/path/file" which causes the network
+    commands to interpret "/path/file" as an address
+    instead of the intended filename.
+
+    The previous check for a leading quote in netboot_common()
+    was replaced with a check which ensures only valid
+    numbers are treated as addresses.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3c2c2f427905040c1513d0c51d637689cba48346
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Thu Nov 27 22:30:27 2008 +0100
+
+    Remove non-ascii characters from fat code
+
+    This code contains some non-ascii characters in comment lines and code.
+    Most editors do not display those characters properly and editing those
+    files results always in diffs at these places which are usually not required
+    to be changed at all. This is error prone.
+
+    So, remove those weird characters and replace them by normal C-style
+    equivalents for which the proper defines were already in the header.
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit dc889e865356497d3e495570118c2245ebce2631
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Fri Nov 28 20:16:58 2008 +0800
+
+    85xx: fix the wrong DDR settings for MPC8572DS
+
+    The default DDR freq is 400MHz or 800M data rate,
+    the old settings is pure wrong for the default case.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9df59533f77de2829b4b66e5b7620e04edaa391c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 24 10:29:26 2008 -0600
+
+    85xx: init gd as early as possible
+
+    Moved up the initialization of GD so C code like set_tlb() can use
+    gd->flags to determine if we've relocated or not in the future.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit aed461af81012a398a205e9be67ab37667491838
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 24 10:29:25 2008 -0600
+
+    85xx: Fix relocation of CCSRBAR
+
+    If the virtual address for CCSRBAR is the same after relocation but
+    the physical address is changing we'd end up having two TLB entries with
+    the same VA.  Instead we new us the new CCSRBAR virt address + 4k as a
+    temp virt address to access the old CCSRBAR to relocate it.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit ea154a1781135d822eedee7567cc156089eae93c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 24 10:25:14 2008 -0600
+
+    FSL: Moved BR_PHYS_ADDR for localbus to common header
+
+    The BR_PHYS_ADDR macro is useful on all machines that have local bus
+    which is pretty much all 83xx/85xx/86xx chips.
+
+    Additionally most 85xx & 86xx will need it if they want to support
+    36-bit physical addresses.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Dec 1 13:47:12 2008 -0600
+
+    85xx: Add PORDEVSR_PCI1 define
+
+    Add define used to determine if PCI1 interface is in PCI or PCIX mode.
+
+    Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Nov 21 19:24:22 2008 -0600
+
+    drivers/fsl_pci_init: Fix inbound window mapping bug
+
+    The current code will cause the creation of a 4GB window
+    starting at 0 if we have more than 4GB of RAM installed,
+    which overlaps with PCI_MEM space and causes pci_bus_to_phys()
+    to return erroneous information. Limit the size to 4GB - 1;
+    which causes the code to create one 2GB and one 1GB window
+    instead.
+
+    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 5a105a333dab6a23e92d763ce76d6f31d57f45df
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Thu Nov 20 15:36:48 2008 -0600
+
+    Removed unused CONFIG_L1_INIT_RAM symbol.
+
+    Prevent further viral propogation of the unused
+    symbol CONFIG_L1_INIT_RAM by just removing it.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 7008d26a40a76f90cae5824c812cfed449fb97b8
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed Oct 29 09:21:44 2008 -0500
+
+    fsl ddr skip interleaving if not supported.
+
+    Removed while(1) hang if memctl_intlv_ctl is set wrong.
+    Remove embedded tabs from strings.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit dd332e18d082de75eca3fc2c7c778f5d4571a096
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Thu Nov 13 18:08:57 2008 +0100
+
+    85xx: socrates: fix DDR SDRAM tlb entry configuration
+
+    since commit be0bd8234b9777ecd63c4c686f72af070d886517
+    tlb entry for socrates DDR SDRAM will be reconfigured
+    by setup_ddr_tlbs() from initdram() causing an
+    inconsistency with previously configured DDR SDRAM tlb
+    entry from tlb_table:
+
+    socrates>l2cam 7 9
+    IDX  PID	  EPN  SIZE V TS	   RPN U0-U3 WIMGE UUUSSS
+      7 : 00 00000000 256MB V  0 -> 0_00000000	0000 -I-G- ---RWX
+      8 : 00 00000000 256MB V  0 -> 0_00000000	0000 ----- ---RWX
+      9 : 00 10000000 256MB V  0 -> 0_10000000	0000 ----- ---RWX
+
+    This patch makes the presence of the DDR SDRAM tlb entry in
+    the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this
+    inconsistency.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Tue Nov 11 10:17:10 2008 -0600
+
+    85xx: Add CPU 2 errata workaround to all 8548 boards
+
+    All mpc8548-based boards should implement the suggested workaround
+    to CPU 2 errata. Without the workaround, its possible for the
+    8548's core to hang while executing a msync or mbar 0 instruction
+    and a snoopable transaction from an I/O master tagged to make
+    quick forward progress is present.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit e57f0fa1333cdf3ca36110aac2900712a5f82976
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Tue Oct 28 17:53:45 2008 +0800
+
+    85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case
+
+    we need TLB entry for DDR at !SPD case.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Tue Oct 28 17:53:38 2008 +0800
+
+    85xx: remove the unused ddr_enable_ecc in the board file
+
+    The DDR controller of 8548/8544/8568/8572/8536 processors
+    have the ECC data init feature, and the new DDR code is
+    using the feature, and we don't need the way with DMA to
+    init memory any more.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 4a129a57d923f7c15aa1f567028a80a32d66a100
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Nov 30 19:36:53 2008 +0100
+
+    at91rm9200dk: Fix typo
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Nov 30 19:36:50 2008 +0100
+
+    AT91: remove non supported board AT91RM9200DF macro
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bd876772ee04095e5dd943d97515a1f14bad4b1c
+Author: Ilko Iliev <iliev@ronetix.at>
+Date:	Tue Dec 2 17:27:54 2008 +0100
+
+    mtd/dataflash.c: fix a problem with the last partition
+
+    This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash
+    partition can be defined to use the area to the end of dataflash size.
+    Now it is possible to have only one dataflash partition from 0 to the end
+    of of dataflash size.
+
+    Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 03f797793b124dccaae145b977d15d6cb9e74504
+Author: Ilko Iliev <iliev@ronetix.at>
+Date:	Tue Dec 2 17:20:17 2008 +0100
+
+    fix some coding style violations.
+
+    This patch fix some coding style violations.
+
+    Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 5e46b1e54112f4b7fd5185665e571510132c12a7
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu Nov 27 14:11:37 2008 +0100
+
+    OneNAND: Add missing mtd info struct before calling onenand_erase()
+
+    Without this patch "saveenv" crashes when MTD partitions are enabled (e.g.
+    for use in UBI) via CONFIG_MTD_PARTITIONS.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 29382d4064fbaff5daacff4c3209370fa5713966
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Thu Nov 20 16:43:52 2008 -0600
+
+    mpc8641: Fix error in README
+
+    I made some updates to the code that didn't make it into the
+    README - fix this
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 801a194616d95e6fc426a176d9615ccbf9876c7f
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Thu Nov 20 12:01:02 2008 -0600
+
+    Removed unused CONFIG_L1_INIT_RAM symbol.
+
+    Prevent further viral propogation of the unused
+    symbol CONFIG_L1_INIT_RAM by just removing it.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f698738e46cb461e28c2d58228bb34a2fcf5a475
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Thu Nov 20 14:02:56 2008 -0600
+
+    86xx: Fix non-64-bit compilation problems.
+
+    Introducing 64-bit (36-bit) support for the MPC8641HPCN
+    failed to accomodate the other two 86xx boards.
+    Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH}
+    CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L}
+    with nominal 32-bit values.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Acked-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date:	Wed Nov 26 17:40:37 2008 +0100
+
+    Remove obsolete command (apply afte USB style patch, 80 chars strict)
+
+    Remove USB obsolete commmand
+
+    Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+    Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit de39f8c19d7c12017248c49d432dcb81db68f724
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date:	Wed Nov 26 17:41:34 2008 +0100
+
+    USB style patch, 80 chars strict
+
+    USB Code style patch
+
+    Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+    Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit d10c5a87cb8affbb4d35a311370316d4383d598e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Nov 7 22:46:21 2008 +0100
+
+    drivers/usb: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 2077e348c2a84901022ad95311b47b70361e6daa
+Author: Scott Wood <scottwood@freescale.com>
+Date:	Tue Nov 25 10:47:02 2008 -0600
+
+    NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().
+
+    This caused the operation to be needlessly repeated if there were
+    no bad blocks and no errors.
+
+    Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 89295028e7d8f7a524f485328279d72fdb102385
+Author: Michal Simek <monstr@monstr.eu>
+Date:	Mon Nov 24 12:09:50 2008 +0100
+
+    ppc4xx: ml300 remove Xilinx BSP from ml300 folder
+
+    This BSP should be outside u-boot source tree.
+    The second reason is that xilinx ppc405 was moved to generic platform.
+
+    Signed-off-by: Michal Simek <monstr@monstr.eu>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 24eea623d4974a169026a975ba12fb23d48154b1
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Mon Nov 24 15:11:10 2008 +0100
+
+    ppc4xx: Remove unused features
+
+    This patch disables some unused features from the PCI405 configuration
+    to keep U-Boot image size below 192k.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Mon Nov 24 15:11:09 2008 +0100
+
+    ppc4xx: Use correct io accessors for PCI405
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 348c849d86a6f0785752b9bc497a34658713d1d1
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Mon Nov 24 15:11:08 2008 +0100
+
+    ppc4xx: Remove unused code from PCI405 code
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 58c696eed839af894e0265064669c402dc28b371
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date:	Mon Nov 24 21:50:59 2008 +0100
+
+    AT91RM9200DK: fix broken boot from NOR flash
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8052352f20b33bef8f9872fc983eac73d4693c38
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date:	Tue Nov 18 10:48:46 2008 +0100
+
+    at91rm9200: fix broken boot from nor flash
+
+    This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
+    CONFIG_AT91RM9200 is defined and nor preloader is used.
+
+    Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit 25ea652e907516a283b38237e83712a918f125d7
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date:	Mon Nov 17 15:58:00 2008 +0100
+
+    UBI: Add proof-of-concept CFI flash support
+
+    With this patch UBI can be used on CFI flash chips.
+
+    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e6a7edbc1778d27431ac663b40a71dafa5d20578
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date:	Mon Nov 17 15:57:59 2008 +0100
+
+    mtd: Remove a printf() from add_mtd_device().
+
+    Remove a printf() from add_mtd_device(), which produces spurious output.
+
+    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 91809ed51d8327a8dbbf29aa98a091154c282171
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date:	Mon Nov 17 15:57:58 2008 +0100
+
+    cfi-mtd: Add cfi-mtd driver.
+
+    Add cfi-mtd driver, which exports CFI flash to MTD layer.
+    This allows CFI flash devices to be used from MTD layer.
+
+    Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD
+    option. Initialization is done by calling cfi_mtd_init() from
+    flash_init().
+
+    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date:	Mon Nov 17 15:49:32 2008 +0100
+
+    cfi_flash: Add interface for flash verbosity control
+
+    Add interface for flash verbosity control. It allows
+    to disable output from low-level flash API. It is useful
+    when calling these low-level functions from context other
+    than flash commands (for example the MTD/CFI interface
+    implmentation).
+
+    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ebc9784ce6528385bb8d2558e783622d4bbf20f8
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date:	Thu Nov 20 15:17:38 2008 +0100
+
+    cfi_flash: Export flash_sector_size() function.
+
+    Export flash_sector_size() function from drivers/mtd/cfi_flash.c,
+    so that it can be used in the upcoming cfi-mtd driver.
+
+    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Nov 17 14:45:22 2008 +0100
+
+    cfi_flash: Make all flash access functions weak
+
+    This patch defines all flash access functions as weak so that
+    they can be overridden by board specific versions.
+
+    This will be used by the upcoming VCTH board support where the NOR
+    FLASH unfortunately can't be accessed memory-mapped. Special
+    accessor functions are needed here.
+
+    To enable this weak functions you need to define
+    CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header.
+    Otherwise the "old" default functions will be used resulting
+    in smaller code.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+    Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a5c4067017631d903e1afa6ad615f0ce19fea517
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Nov 24 08:31:16 2008 +0100
+
+    UBI: Change parsing of size in commands to default to hex
+
+    Currently the size parameters of the UBI commands (e.g. "ubi write") are
+    decoded as decimal instead of hex as default. This patch now interprets
+    all these values consistantly as hex, as all other standard U-Boot commands
+    do.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit de01c76c3ccc4e6c5989228eed58e955a3a1a968
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Nov 21 13:06:06 2008 +0100
+
+    ppc4xx: ML2 shouldn't include the 4xx EMAC driver
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date:	Fri Nov 14 16:19:19 2008 +0300
+
+    ppc4xx: katmai: Change default config
+
+     This patch enables support for EXT2, and increases the
+    CONFIG_SYS_BOOTMAPSZ size for the default configuration
+    of the katmai boards to use them as the RAID-reference
+    AMCC setups.
+
+     EXT2 enabling allows one to boot kernels from the EXT2
+    formatted Compact Flash cards.
+
+     CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the
+    Linux kernels, which use PAGE_SIZE of 256KB. Otherwise,
+    the memory area with DTB file (which is placed at the
+    end of the bootmap area) will turn out to be overlapped
+    with the BSS segment of the 256KB kernel, and zeroed
+    in early_init() of Linux.
+
+     Actually, increasing of the bootmap size could be done
+    via setting of the bootm_size U-Boot variable, but it looks
+    like the current U-Boot implementation have some bootm_size-
+    related functionality lost. In many places through the U-Boot
+    code the CONFIG_SYS_BOOTMAPSZ definition is used directly
+    (instead of trying to read the corresponding value from the
+    environment). The same is truth for the boot_jump_linux()
+    function in lib_ppc/bootm.c, where U-Boot transfers control
+    to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size)
+    value to the booting kernel.
+
+    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ddf45cc758d394591fb9bcdcbe96530f733f2bce
+Author: Dave Mitchell <dmitch71@gmail.com>
+Date:	Thu Nov 20 14:09:50 2008 -0600
+
+    ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization
+
+    Expanded OCM TLB to allow access to 64K OCM as well as 256K of
+    internal SRAM.
+
+    Adjusted internal SRAM initialization to match updated user
+    manual recommendation.
+
+    OCM & ISRAM are now mapped as follows:
+	    physical	    virtual	    size
+    ISRAM   0x4_0000_0000   0xE300_0000     256k
+    OCM     0x4_0004_0000   0xE304_0000     64k
+
+    A single TLB was used for this mapping.
+
+    Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b14ca4b61a681f75f3125676e09d7ce6af66e927
+Author: Dave Mitchell <dmitch71@gmail.com>
+Date:	Thu Nov 20 14:00:49 2008 -0600
+
+    ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs
+
+    Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and
+    L2 cache DCRs from ppc440.h to this new header.
+
+    Also converted these DCR defines from lowercase to uppercase and
+    modified referencing modules to use them.
+
+    Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 711e2b2af820d21d9931d4cf8057d3894600fd54
+Author: Steven A. Falco <sfalco@harris.com>
+Date:	Thu Nov 20 14:37:57 2008 -0500
+
+    ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h
+
+    The definitions of bits in SDR_CFG are incorrect, and not used within
+    U-Boot.  Therefore, they can be removed.
+
+    The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions,
+    and are unused, so they can be removed too.
+
+    A definition for SDR0_DDRCFG is added.
+
+    Signed-off-by: Steven A. Falco <sfalco@harris.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e23c7c95a96eb0f068efe5c532215a10a1512a95
+Author: Dirk Behme <dirk.behme@gmail.com>
+Date:	Mon Nov 10 20:15:25 2008 +0100
+
+    ARM: OMAP: Convert IO macros
+
+    Convert IO macros to readx/writex.
+
+    Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit 263b749e2e25473a48776d317bd2a7e2ddcdd212
+Author: Ilko Iliev <iliev@ronetix.at>
+Date:	Sun Nov 9 15:53:14 2008 +0100
+
+    lib_arm: do_bootm_linux() - correct a small mistake
+
+    This patch corrects a small bug in the "if" condition:
+    the parameter "flag" is 0 and the "if" condition is always true.
+    The result is - the boom command doesn't start the kernel.
+    Affected targets: all arm based.
+
+    Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc
+Author: Stelian Pop <stelian@popies.net>
+Date:	Sun Nov 9 00:14:46 2008 +0100
+
+    AT91: Enable PLLB for USB
+
+    At least some (old ?) versions of the AT91Bootstrap do not set up the
+    PLLB correctly to 48 MHz in order to make USB host function correctly.
+
+    This patch sets up the PLLB to the same values Linux uses, and makes USB
+    work ok on the following CPUs:
+	- AT91CAP9
+	- AT91SAM9260
+	- AT91SAM9263
+
+    This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
+    the relevant AT91CAP9/AT91SAM9 atmel boards.
+
+    Signed-off-by: Stelian Pop <stelian@popies.net>
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb
+Author: Stelian Pop <stelian@popies.net>
+Date:	Fri Nov 7 13:55:14 2008 +0100
+
+    AT91: Use AT91_CPU_CLOCK in displays
+
+    Introduce AT91_CPU_CLOCK and use it for displaying the CPU
+    speed in the LCD driver.
+
+    Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the
+    corresponding board clocks.
+
+    Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu Nov 20 11:46:20 2008 +0100
+
+    ppc4xx: Clear all potentially pending exceptions in MCSR
+
+    This is needed on Canyonlands which still has an exception pending
+    while running relocate_code(). This leads to a failure after trap_init()
+    is moved to the top of board_init_r().
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit facdad5f2602e899a01746916beddbf9e856b5ee
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Nov 19 10:10:30 2008 +0100
+
+    powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4
+Author: Howard Gregory <Greg.Howard@freescale.com>
+Date:	Tue Nov 4 14:55:33 2008 +0800
+
+    mpc83xx: Improve the performance of DDR memory
+
+    modify the CAS timings. my understanding is that these
+    settings decrease various wait times in the DDR interface.
+    Because these wait times are in clock cycles, and the DDR
+    clock on the 8315 RDB runs slower than on some other 83xx
+    platforms, we can dial down these values without a problem,
+    thereby decreasing the latency of memory a little.
+
+    Signed-off-by: Howard Gregory <Greg.Howard@freescale.com>
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8000b086b33a5a81f3f390f37e178db7956dc08b
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Fri Oct 24 14:55:33 2008 +0200
+
+    ARM: Add Apollon UBI support
+
+    To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI
+    macro.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 694a0b3f1c0accd0de94b89555155d69f8022824
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 11:47:05 2008 +0100
+
+    UBI: Add UBI command support
+
+    This patch adds these UBI commands:
+
+    ubi part [nand|onenand] [part] - Show or set current partition
+    ubi info [l[ayout]] -Display volume and UBI layout information
+    ubi create[vol] volume [size] [type] - Create volume name with size
+    ubi write[vol] address volume size - Write volume from address with size
+    ubi read[vol] address volume [size] - Read volume to address with size
+    ubi remove[vol] volume - Remove volume
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 58be3a1056d88c6d05f3e914389282807e69923a
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:38:24 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 8/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:36:36 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 7/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:32:36 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 6/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c91a719daa331b5856109313371e4ece5ec06d96
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:28:06 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 5/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:27:23 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 4/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:26:54 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 3/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 961df83361aff9a14f226214224eb8a06e05ba24
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:25:44 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 2/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f399d4a281713d5ef2d764f05d545fe61e3bd569
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:23:06 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 1/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:20:36 2008 +0100
+
+    MTD: Add MTD paritioning infrastructure
+
+    This MTD part infrastructure will be used by the upcoming
+    UBI support.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b827cf1720acda2473afa516956eab6f7cca9a1
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date:	Thu Oct 16 22:54:03 2008 +0530
+
+    Align end of bss by 4 bytes
+
+    Most of the bss initialization loop increments 4 bytes
+    at a time. And the loop end is checked for an 'equal'
+    condition. Make the bss end address aligned by 4, so
+    that the loop will end as expected.
+
+    Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3f510db522d160179dff3ddcce9b18f6241c2c24
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Mon Nov 10 19:45:35 2008 -0600
+
+    mpc8641: fix address-cells default in old .dts detection
+
+    address-cells defaults to 2, not 1; so in the unlikely
+    event that it isn't specified, this patch is required
+    for correct operation.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Oct 31 17:14:39 2008 -0500
+
+    lib_ppc: Move trap_init to occur earlier
+
+    Doing trap_init immediately once we're running from RAM
+    means we're no longer dependent on the physical location of
+    the flash on non-BookE platforms. Before trap_init, those
+    platforms switch to real mode and go to 0xfff00100 on exception.
+    After the switch, they go to 0x00000100  This makes it easier to
+    move the flash location.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit d52082b12c6e545705a19433a2f4142526536189
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Nov 7 13:46:19 2008 -0600
+
+    mpc8641: Try to detect old .dts files
+
+    Since we've changed the memory map of the board, be nice and
+    add some checking to try to catch out-of-date .dts files.  We do
+    this by checking the CCSRBAR location in the .dts and comparing
+    it to the CCSRBAR location in u-boot.  If they don't match, a
+    warning msg is printed.  This isn't foolproof, but it's simple and
+    will catch most of the cases where an out-of-date .dts is present,
+    including all of the cases where a new u-boot is used with an old
+    standard MPC8641 .dts file as supplied with Linux.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 8db0400a27839f91c047dcb83f4a0f09e054a180
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Thu Nov 6 13:04:09 2008 -0600
+
+    toplevel Makefile: Add MPC8641HPCN_36BIT target
+
+    This will enable CONFIG_PHYS_36BIT for MPC8641HPCN.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 3111d32c494e8251b90917447796a7206b757e1e
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Thu Nov 6 17:37:35 2008 -0600
+
+    mpc8641: Support 36-bit physical addressing
+
+    This patch creates a memory map with all the devices
+    in 36-bit physical space, in addition to the 32-bit map.
+    The CCSR relocation is moved (again, sorry) to
+    allow for the physical address to be 36 bits - this
+    requires translation to be enabled.  With 36-bit physical
+    addressing enabled, we are no longer running with VA=PA
+    translations.  This means we have to distinguish between
+    the two in the config file.  The existing region name is
+    used to indicate the virtual address, and a _PHYS variety
+    is created to represent the physical address.
+
+    Large physical addressing is not enabled by default.
+    Set CONFIG_PHYS_64BIT in the config file to turn this on.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit c759a01a0022de9378a3a761f49786f87684c916
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Thu Nov 6 17:36:04 2008 -0600
+
+    mpc8641: Change 32-bit memory map
+
+    The memory map on the 8641hpcn is modified to look more like
+    the 85xx boards; this is a step towards a more standardized
+    layout going forward. As part of this change, we now relocate
+    the flash.
+
+    The regions for some of the mappings were far larger than they
+    needed to be.  I have reduced the mappings to match the
+    actual sizes supported by the hardware.
+
+    In addition I have removed the comments at the head
+    of the BAT blocks in the config file, rather than updating
+    them.  These get horribly out of date, and it's a simple
+    matter to look at the defines to see what they are set to
+    since everything is right here in the same file.
+
+    Documentation has been changed to reflect the new map, as this
+    change is user visible, and affects the OS which runs post-uboot.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit bf9a8c34309ed9276258295db9e9212aabb2531a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:35 2008 -0600
+
+    mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY
+
+    We define CONFIG_MONITOR_BASE_EARLY to define the initial location
+    of the bootpage in flash.	Use this to create an early mapping
+    definition for the FLASH, and change the early_bats code to use this.
+
+    This  change facilitates the relocation of the flash since the early
+    mappings are no longer tied to the final location of the flash.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:34 2008 -0600
+
+    mpc86xx: Use SRR0/1/rfi to enable address translation, not blr
+
+    Using a mtmsr/blr means that you have to be executing at the
+    same virtual address once you enable translation.  This is
+    unnecessarily restrictive, and is not really how this is
+    usually done.  Change it to use the more common mtspr SRR0/SRR1
+    and rfi method.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 6bf98b1362f0cb237620355ed3e6762fff82388d
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:33 2008 -0600
+
+    mpc8641: make DIAG_ADDR == FLASH_BASE
+
+    Currently, that's what it is, but it's hardcoded.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 170deacb1ddc39164bdb68f3963e0c0456a5369b
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:32 2008 -0600
+
+    mpc8641: Drop imaginary second flash bank, map 8MB
+
+    There's a lot of setup and foo for the second flash
+    bank.  The problem is, this board doesn't actually have one.
+    Clean this up.  Also, the flash is 8M in size.  Get rid
+    of the confusing aliased overmapping, and just map 8M.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:31 2008 -0600
+
+    mpc8641: only define CONFIG_ENV_SIZE once
+
+    It's currently defined twice inside in an if/else block, but
+    both halves set the same value.  Move the define outside
+    the if.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:30 2008 -0600
+
+    mpc86xx: Move setup_bats into cpu_init_f
+
+    In order to later allow for a physical relocation of the
+    flash, setup_bats, which sets up the final BAT mapping
+    for the board, needs to happen *after* init_laws().
+    Otherwise, there will be no window programmed for the flash
+    at the new physical location at the point when we change
+    the mmu translation.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:29 2008 -0600
+
+    mpc8641: Remove extra "0" from BR2 define
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit edf3fe7d39a1ee07353128af5221422ce9ccfad6
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date:	Thu Oct 23 09:08:18 2008 -0400
+
+    drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.
+
+    Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c.
+    This adds support for PHY-less MAC connections to the UEC.
+
+    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Thu Oct 23 16:27:24 2008 +0000
+
+    ColdFire: Add mii driver in drivers/net
+
+    All CF platforms' mii.c are consolidated into one
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 25a859066b3af1070eb69f12022113c0a91bd813
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Mon Oct 27 23:53:17 2008 -0700
+
+    Moved initialization of PPC4xx EMAC to cpu_eth_init()
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+    Acked-by: Stefan Roese <sr@denx.de>
+
+commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Nov 9 21:29:23 2008 -0800
+
+    Moved PPC4xx EMAC driver to drivers/net
+
+    Also changed path in all linker scripts that reference this driver
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+    Acked-by: Stefan Roese <sr@denx.de>
+
+commit 96e21f86e8266ed40759e5495ee461265d7f6d28
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Mon Oct 27 23:50:15 2008 -0700
+
+    Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
+
+    All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+    Acked-by: Stefan Roese <sr@denx.de>
+
+commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Thu Oct 23 22:02:49 2008 -0700
+
+    Moved initialization of MPC8XX SCC to cpu_eth_init()
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a9bec96d6359ac9f90a852962bf3040cad9e0256
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Wed Oct 22 23:47:51 2008 -0700
+
+    Moved initialization of MPC8220 FEC to cpu_eth_init()
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Wed Oct 22 23:32:48 2008 -0700
+
+    Moved initialization of QE Ethernet controller to cpu_eth_init()
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3456a148276d5494b53ee40242efb6462d163504
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Wed Oct 22 23:20:29 2008 -0700
+
+    Moved initialization of FCC Ethernet controller to cpu_eth_init
+
+    Affected boards:
+	Several MPC8xx boards
+	Several MPC8260/MPC8272 boards
+	Several MPC85xx boards
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 62e15b497f5c6334c059512678c8db7940ae4c61
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Thu Oct 30 22:15:35 2008 -0700
+
+    Fix typo in cpu/mpc85xx/cpu.c
+
+    CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sun Oct 19 12:08:50 2008 +0900
+
+    net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init
+
+    This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init
+    as a part of ongoing eth_initialize cleanup work.  The function ret value
+    is also fixed as it should be negative on fail.
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit cc94074ecac1885d18ddb683eb934b3c0268aa5b
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Fri Sep 5 01:55:22 2008 -0400
+
+    Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()
+
+    Also, removed the driver initialization from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f2a7806fc23e82d30c8548911369e0c530607354
+Author: Clive Stubbings <uboot@xentech.co.uk>
+Date:	Mon Oct 27 15:05:00 2008 +0000
+
+    xilinx_emaclite buffer overrun
+
+    Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and
+    PKTSIZE_ALIGN bytes long.
+
+    Acked-by: Michal Simek <monstr@monstr.eu>
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0115b1953718a2969f6469d3d5da51ba11e12d42
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date:	Fri Sep 26 08:59:12 2008 -0400
+
+    NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.
+
+    The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0]
+    This patch makes these function use the devname argument that is passed in to
+    allow access to the phy registers of other devices in devlist[].
+
+    Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 44dcb7332033db8de2810f2fffcae3084f15c8d4
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date:	Mon Oct 6 15:31:43 2008 -0400
+
+    Adds two more ethernet interface to 83xx
+
+    Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info.
+    Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3
+Author: Stelian Pop <stelian@popies.net>
+Date:	Fri Nov 7 13:54:31 2008 +0100
+
+    AT91: Replace AT91_BASE_EMAC by the board specific values.
+
+    AT91_BASE_EMAC is never used outside the board specific files,
+    so replace its usage by the board specific AT91xxx_BASE_EMAC.
+
+    Signed-off-by: Stelian Pop <stelian@popies.net>
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c91e17affa175ce06afa89b04752301eb4a61666
+Author: Stelian Pop <stelian@popies.net>
+Date:	Fri Nov 7 12:09:21 2008 +0100
+
+    AT91: Replace (undefined) AT91_ID_US* by the board specific values.
+
+    AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined.
+    Since they are never used outside the board specific files, they can
+    be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 /
+    AT91xxx_ID_US2.
+
+    Bug spotted by Jesus Alvarez <jalvarez@micromint.com>.
+
+    Signed-off-by: Stelian Pop <stelian@popies.net>
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Nov 1 10:47:59 2008 +0100
+
+    Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1079432e04ccf71aa3684181186182cd63512f19
+Author: Sergey Lapin <slapin@ossfans.org>
+Date:	Fri Oct 31 12:28:43 2008 +0100
+
+    Custom AFEB9260 board support
+
+    This patch provides support for AFEB9260 board, a product of
+    OpenSource hardware and software. Some commertial projects
+    are made with this design. A board is basically AT91SAM9260-EK
+    with some modifications and different peripherals and different
+    parts used. Main purpose of this project is to gain experience in
+    hardware design.
+    More info: http://groups.google.com/group/arm9fpga-evolution-board
+    (In Russian only, sorry).
+    Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
+
+    Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00
+Author: Tomohiro Masubuchi <tomohiro_masubuchiattripeaks.co.jp>
+Date:	Tue Oct 21 13:17:16 2008 +0900
+
+    Change to use "do_div" macro
+
+    Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp>
+
+commit e352495318d8056a00faa21b633b3e4374bfbf52
+Author: Roman Mashak <romez777@gmail.com>
+Date:	Wed Oct 22 16:00:26 2008 -0400
+
+    ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
+
+    OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory.
+    It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap
+
+    Signed-off-by: Roman Mashak <romez777@gmail.com>
+
+commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb
+Author: Roman Mashak <romez777@gmail.com>
+Date:	Tue Oct 21 03:01:41 2008 -0700
+
+    ARM/Versatile port: Removed unused functions
+
+    Removal of never used functions.
+
+    Signed-off-by: Roman Mashak <romez777@gmail.com>
+
+commit 1266df887781c779deaf6d05eea2ef90a470cb34
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Mon Nov 3 15:44:01 2008 -0600
+
+    powerpc: change 86xx SMP boot method
+
+    We put the bootpg for the secondary cpus into memory and use
+    BPTR to get to it.	This is a step towards converting to the
+    ePAPR boot methodology.  Also, the code is written to
+    deal properly with more than 4GB of RAM.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit b5431560682d8f318fbc49db87cfe13ab41d2ee4
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Oct 31 17:13:49 2008 -0500
+
+    8641HPCN: Config file cleanup
+
+    There are several items in the config file that were hardcoded
+    but that should really be based on other config options, since
+    the regions are contiguous and depend on being so.	This cleans
+    that up a bit.  Also, add BR_PHYS_ADDR() macro to convert
+    addresses into the proper format for BR registers.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 4c77de3f144ca088c3867bd6240718c10f5a9d69
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Oct 31 17:13:32 2008 -0500
+
+    86xx: Make dram_size a phys_size_t
+
+    It's currently a long and should be phys_size_t.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 104992fc541302a6bac74448e01e7fdad20abca0
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Sun Nov 2 18:19:32 2008 -0600
+
+    powerpc 86xx: Handle CCSR relocation earlier
+
+    Currently, the CCSR gets relocated while translation is
+    enabled, meaning we need 2 BAT translations to get to both the
+    old location and the new location.	Also, the DEFAULT
+    CCSR location has a dependency on the BAT that maps the
+    FLASH region.  Moving the relocation removes this unnecessary
+    dependency. This makes it easier and more intutive to
+    modify the board's memory map.
+
+    Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same
+    BAT for CCSR space.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Oct 31 17:14:14 2008 -0500
+
+    mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
+
+    You can't actually have both, and with some coming changes to
+    change the memory map for the board and support 36-bit physical,
+    we need the extra BAT that is being consumed by having both.
+
+    I also make non-PCI configs build cleanly, for the sake of sanity.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Oct 31 17:14:00 2008 -0500
+
+    mpc8641: Stop supporting non-PCI_PNP configs
+
+    We don't actually ever do this, remove the code so we
+    can stop maintaining it.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Fri Oct 24 12:59:12 2008 +0000
+
+    ColdFire: Fix M5329EVB and M5373EVB nand issue
+
+    Fix compilation issue caused by a few mismatches.
+    Provide proper nand chip select enable/disable in
+    nand_hwcontrol() rather than in board_nand_init()
+    just enable once. Remove redundant local nand driver
+    functions - nand_read_byte(), nand_write_byte() and
+    nand_dev_ready() to use common nand driver.
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 1b2708442224a551a0b865b52710306333888932
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Wed Oct 22 11:55:30 2008 +0000
+
+    ColdFire: Fix compilation error
+
+    The error was caused by the change for strmhz() in cpu.c.
+    A few of them were one extra close parenthesis.
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 536e7dac16769954915a484e682a2efb28699133
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Wed Oct 22 11:38:21 2008 +0000
+
+    ColdFire: Add MCF5301x CPU and M53017EVB support
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit a21d0c2cc9add8894d971ab791f4032f077db817
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Oct 21 15:37:02 2008 +0000
+
+    ColdFire: Add SBF support for M52277EVB
+
+    Add serial boot support
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit b202816c61042c183fe67d097a5893b0f2dafba0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Oct 21 14:19:26 2008 +0000
+
+    ColdFire: Use CFI driver for M5272C3
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit f3962d3f574e5a1cffacd4e9bc48713060a2a314
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Oct 21 13:47:54 2008 +0000
+
+    ColdFire: Relocate FEC's GPIO and mii functions protocols
+
+    Place FEC pin assignments in cpu_init.c from platform's
+    mii.c
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Oct 21 12:15:44 2008 +0000
+
+    ColdFire: Remove platforms mii.c file
+
+    Will use mcfmii.c driver in drivers/net rather than
+    keep creating new mii.c for each future platform.
+    Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB,
+    M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB,
+    M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's
+    mii.c
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 012522fef3b382469125beb46a315ab4dee02fb0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Oct 21 10:03:07 2008 +0000
+
+    ColdFire: Modules header files cleanup
+
+    Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG,
+    MDHA, SKHA, INTC, and FlexBus structures and
+    definitions in immap_5xxx.h to more unify modules
+    header files. Append DSPI support for m547x_8x.
+    SSI cleanup. Remove USB Host structure from immap_539.h.
+    Apply changes to use FlexBus structures in mcf52x2's
+    cpu_init.c and platform configuration files.
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit ac2331aee99ad36be0fcfed8c49922e3c61b576d
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Oct 21 08:52:36 2008 +0000
+
+    ColdFire: Remove linker file
+
+    Each different build for M54455EVB and M5235EVB will
+    create a u-boot.lds linker file. It is redundant to
+    keep the u-boot.lds
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 0829323073c505556ed5f5073f91adb504584d45
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Fri Oct 31 11:26:44 2008 -0500
+
+    ppc: Fix compile warnings when !CONFIG_OF_LIBFDT
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a80b21d5127583171d6e9bc7f722947641898012
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Oct 31 12:12:12 2008 +0100
+
+    common/Makefile: create others group for non core, environment and command files
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Fri Oct 31 01:13:37 2008 +0100
+
+    TQM8260: use CFI flash driver instead of custom driver.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Thu Oct 30 17:35:30 2008 -0500
+
+    Consolidate MAX/MIN definitions
+
+    There were several, now there is one (two if you count the lower-case
+    versions).
+
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a
+Author: Heiko Schocher <hs@denx.de>
+Date:	Thu Oct 30 09:23:09 2008 +0100
+
+    mgsuvd: remove unused defines in config file.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun Nov 2 16:14:22 2008 +0100
+
+    Coding Style cleanup, update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
 commit a47f957ab523019992fdef857af01bd71c58a4da
 Author: Alessandro Rubini <rubini-list@gnudd.com>
 Date:	Fri Oct 31 22:33:21 2008 +0100

MAINTAINERS

@@ -412,6 +412,10 @@ Rune Torgersen <runet@innovsys.com>
 
 	MPC8266ADS	MPC8266
 
+Peter Tyser <ptyser@xes-inc.com>
+
+	XPEDITE5200	MPC8548
+	XPEDITE5370	MPC8572
 
 David Updegraff <dave@cray.com>
 
@@ -705,7 +709,6 @@ Yasushi Shoji <yashi@atmark-techno.com>
 Michal Simek <monstr@monstr.eu>
 
 	ML401		MicroBlaze
-	XUPV2P		MicroBlaze
 
 #########################################################################
 # Coldfire Systems:							#

MAKEALL

@@ -1,6 +1,15 @@
 #!/bin/sh
 
-: ${JOBS:=}
+# Determine number of CPU cores if no default was set
+: ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
+
+if [ "$BUILD_NCPUS" -gt 1 ]
+then
+	JOBS=-j`expr "$BUILD_NCPUS" + 1`
+else
+	JOBS=""
+fi
+
 
 if [ "${CROSS_COMPILE}" ] ; then
 	MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
@@ -377,6 +386,8 @@ LIST_85xx="		\
 	TQM8548		\
 	TQM8555		\
 	TQM8560		\
+	XPEDITE5200	\
+	XPEDITE5370	\
 "
 
 #########################################################################
@@ -690,7 +701,6 @@ LIST_nios2="		\
 LIST_microblaze="	\
 	ml401		\
 	suzaku		\
-	xupv2p		\
 "
 
 #########################################################################

Makefile

@@ -21,8 +21,8 @@
 # MA 02111-1307 USA
 #
 
-VERSION = 2008
-PATCHLEVEL = 10
+VERSION = 2009
+PATCHLEVEL = 01
 SUBLEVEL =
 EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
@@ -30,6 +30,7 @@ U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
 endif
+TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
 VERSION_FILE = $(obj)include/version_autogenerated.h
 
 HOSTARCH := $(shell uname -m | \
@@ -44,7 +45,12 @@ HOSTARCH := $(shell uname -m | \
 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 	    sed -e 's/\(cygwin\).*/cygwin/')
 
-export	HOSTARCH HOSTOS
+# Set shell to bash if possible, otherwise fall back to sh
+SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	else if [ -x /bin/bash ]; then echo /bin/bash; \
+	else echo sh; fi; fi)
+
+export	HOSTARCH HOSTOS SHELL
 
 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -221,6 +227,8 @@ LIBS += disk/libdisk.a
 LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/block/libblock.a
 LIBS += drivers/dma/libdma.a
+LIBS += drivers/fpga/libfpga.a
+LIBS += drivers/gpio/libgpio.a
 LIBS += drivers/hwmon/libhwmon.a
 LIBS += drivers/i2c/libi2c.a
 LIBS += drivers/input/libinput.a
@@ -230,6 +238,7 @@ LIBS += drivers/mtd/libmtd.a
 LIBS += drivers/mtd/nand/libnand.a
 LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
 LIBS += drivers/mtd/onenand/libonenand.a
+LIBS += drivers/mtd/ubi/libubi.a
 LIBS += drivers/mtd/spi/libspi_flash.a
 LIBS += drivers/net/libnet.a
 LIBS += drivers/net/phy/libphy.a
@@ -259,7 +268,7 @@ LIBS += api/libapi.a
 LIBS += post/libpost.a
 
 LIBS := $(addprefix $(obj),$(LIBS))
-.PHONY : $(LIBS) $(VERSION_FILE)
+.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 
 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
@@ -339,7 +348,7 @@ $(obj)u-boot:		depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT)
 $(OBJS):	depend $(obj)include/autoconf.mk
 		$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 
-$(LIBS):	depend $(obj)include/autoconf.mk
+$(LIBS):	depend $(obj)include/autoconf.mk $(SUBDIRS)
 		$(MAKE) -C $(dir $(subst $(obj),,$@))
 
 $(LIBBOARD):	depend $(LIBS) $(obj)include/autoconf.mk
@@ -351,13 +360,13 @@ $(SUBDIRS):	depend $(obj)include/autoconf.mk
 $(LDSCRIPT):	depend $(obj)include/autoconf.mk
 		$(MAKE) -C $(dir $@) $(notdir $@)
 
-$(NAND_SPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
+$(NAND_SPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 		$(MAKE) -C nand_spl/board/$(BOARDDIR) all
 
 $(U_BOOT_NAND):	$(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
 		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 
-$(ONENAND_IPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
+$(ONENAND_IPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 		$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 
 $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
@@ -366,10 +375,13 @@ $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
 
 $(VERSION_FILE):
 		@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
-		 '$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \
-		 ) > $@.tmp
+		 '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 
+$(TIMESTAMP_FILE):
+		@date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
+		@date +'#define U_BOOT_TIME "%T"' >> $@
+
 gdbtools:
 		$(MAKE) -C tools/gdb all || exit 1
 
@@ -379,7 +391,7 @@ updater:
 env:
 		$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 
-depend dep:	$(VERSION_FILE)
+depend dep:	$(TIMESTAMP_FILE) $(VERSION_FILE)
 		for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 
 TAG_SUBDIRS += include
@@ -396,6 +408,7 @@ TAG_SUBDIRS += disk
 TAG_SUBDIRS += common
 TAG_SUBDIRS += drivers/bios_emulator
 TAG_SUBDIRS += drivers/block
+TAG_SUBDIRS += drivers/gpio
 TAG_SUBDIRS += drivers/hwmon
 TAG_SUBDIRS += drivers/i2c
 TAG_SUBDIRS += drivers/input
@@ -452,7 +465,8 @@ $(obj)include/autoconf.mk: $(obj)include/config.h
 	set -e ; \
 	: Extract the config macros ; \
 	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
-		sed -n -f tools/scripts/define2mk.sed > $@
+		sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
+	mv $@.tmp $@
 
 sinclude $(obj)include/autoconf.mk.dep
 
@@ -460,7 +474,7 @@ sinclude $(obj)include/autoconf.mk.dep
 else	# !config.mk
 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
-$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \
+$(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
 dep tags ctags etags cscope $(obj)System.map:
 	@echo "System not configured - see README" >&2
 	@ exit 1
@@ -1250,14 +1264,11 @@ CMS700_config:	unconfig
 CPCI2DP_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
 
-CPCI405_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
-
+CPCI405_config		\
 CPCI4052_config		\
 CPCI405DT_config	\
 CPCI405AB_config:	unconfig
 	@mkdir -p $(obj)board/esd/cpci405
-	@echo "TEXT_BASE = 0xFFFC0000" > $(obj)board/esd/cpci405/config.tmp
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
 
 CPCIISER4_config:	unconfig
@@ -2455,6 +2466,12 @@ TQM8560_config:		unconfig
 	echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
 	@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
 
+XPEDITE5200_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
+
+XPEDITE5370_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
+
 #########################################################################
 ## MPC86xx Systems
 #########################################################################
@@ -2584,17 +2601,84 @@ afeb9260_config:	unconfig
 at91cap9adk_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
 
+at91sam9260ek_nandflash_config \
+at91sam9260ek_dataflash_cs0_config \
+at91sam9260ek_dataflash_cs1_config \
 at91sam9260ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+
+at91sam9xeek_nandflash_config \
+at91sam9xeek_dataflash_cs0_config \
+at91sam9xeek_dataflash_cs1_config \
+at91sam9xeek_config	:	unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+	fi;
+	@$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9
 
+at91sam9261ek_nandflash_config \
+at91sam9261ek_dataflash_cs0_config \
+at91sam9261ek_dataflash_cs3_config \
 at91sam9261ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
 
+at91sam9263ek_nandflash_config \
+at91sam9263ek_dataflash_config \
+at91sam9263ek_dataflash_cs0_config \
 at91sam9263ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
 
+at91sam9rlek_nandflash_config \
+at91sam9rlek_dataflash_config \
+at91sam9rlek_dataflash_cs0_config \
 at91sam9rlek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
 
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
@@ -3099,11 +3183,6 @@ suzaku_config:	unconfig
 	@echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
-xupv2p_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
-
 #========================================================================
 # Blackfin
 #========================================================================
@@ -3154,9 +3233,9 @@ mimc200_config		:	unconfig
 ## sh2 (Renesas SuperH)
 #########################################################################
 rsk7203_config: unconfig
-	@ >include/config.h
-	@echo "#define CONFIG_RSK7203 1" >> include/config.h
-	@./mkconfig -a $(@:_config=) sh sh2 rsk7203 renesas
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_RSK7203 1" > $(obj)/include/config.h
+	@$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
 
 #########################################################################
 ## sh3 (Renesas SuperH)
@@ -3179,7 +3258,7 @@ ms7720se_config: unconfig
 MigoR_config :       unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
-	@./mkconfig -a $(@:_config=) sh sh4 MigoR renesas
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
 
 ms7750se_config: unconfig
 	@mkdir -p $(obj)include
@@ -3275,7 +3354,7 @@ clean:
 	@rm -f $(obj)include/bmp_logo.h
 	@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
 	@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
-	@rm -f $(obj)api_examples/demo $(VERSION_FILE)
+	@rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE)
 	@find $(OBJTREE) -type f \
 		\( -name 'core' -o -name '*.bak' -o -name '*~' \
 		-o -name '*.o'	-o -name '*.a'	\) -print \

README

@@ -381,6 +381,24 @@ The following options need to be configured:
 		This define fills in the correct boot CPU in the boot
 		param header, the default value is zero if undefined.
 
+- vxWorks boot parameters:
+
+		bootvx constructs a valid bootline using the following
+		environments variables: bootfile, ipaddr, serverip, hostname.
+		It loads the vxWorks image pointed bootfile.
+
+		CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name
+		CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address
+		CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server
+		CONFIG_SYS_VXWORKS_BOOT_ADDR - Address of boot parameters
+
+		CONFIG_SYS_VXWORKS_ADD_PARAMS
+
+		Add it at the end of the bootline. E.g "u=username pw=secret"
+
+		Note: If a "bootargs" environment is defined, it will overwride
+		the defaults discussed just above.
+
 - Serial Ports:
 		CONFIG_PL010_SERIAL
 
@@ -603,6 +621,8 @@ The following options need to be configured:
 		CONFIG_CMD_MII		* MII utility commands
 		CONFIG_CMD_NAND		* NAND support
 		CONFIG_CMD_NET		  bootp, tftpboot, rarpboot
+		CONFIG_CMD_PCA953X	* PCA953x I2C gpio commands
+		CONFIG_CMD_PCA953X_INFO	* PCA953x I2C gpio info command
 		CONFIG_CMD_PCI		* pciinfo
 		CONFIG_CMD_PCMCIA		* PCMCIA support
 		CONFIG_CMD_PING		* send ICMP ECHO_REQUEST to network
@@ -680,6 +700,13 @@ The following options need to be configured:
 		Note that if the RTC uses I2C, then the I2C interface
 		must also be configured. See I2C Support, below.
 
+- GPIO Support:
+		CONFIG_PCA953X		- use NXP's PCA953X series I2C GPIO
+		CONFIG_PCA953X_INFO	- enable pca953x info command
+
+		Note that if the GPIO device uses I2C, then the I2C interface
+		must also be configured. See I2C Support, below.
+
 - Timestamp Support:
 
 		When CONFIG_TIMESTAMP is selected, the timestamp
@@ -2157,6 +2184,11 @@ Configuration Settings:
 		This option also enables the building of the cfi_flash driver
 		in the drivers directory
 
+- CONFIG_FLASH_CFI_MTD
+		This option enables the building of the cfi_mtd driver
+		in the drivers directory. The driver exports CFI flash
+		to the MTD layer.
+
 - CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 		Use buffered writes to flash.
 
@@ -3708,7 +3740,7 @@ MPC826x processors), on others (parts of) the data cache can be
 locked as (mis-) used as memory, etc.
 
 	Chris Hallinan posted a good summary of these issues to the
-	u-boot-users mailing list:
+	U-Boot mailing list:
 
 	Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)?
 	From: "Chris Hallinan" <clh@net1plus.com>
@@ -3918,7 +3950,7 @@ int main (int argc, char *argv[])
 
 	Download latest U-Boot source;
 
-	Subscribe to u-boot-users mailing list;
+	Subscribe to u-boot mailing list;
 
 	if (clueless) {
 		email ("Hi, I am new to U-Boot, how do I get started?");
@@ -3995,10 +4027,11 @@ Since the number of patches for U-Boot is growing, we need to
 establish some rules. Submissions which do not conform to these rules
 may be rejected, even when they contain important and valuable stuff.
 
-Patches shall be sent to the u-boot-users mailing list.
-
 Please see http://www.denx.de/wiki/U-Boot/Patches for details.
 
+Patches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>;
+see http://lists.denx.de/mailman/listinfo/u-boot
+
 When you send a patch, please include the following information with
 it:
 
@@ -4061,7 +4094,7 @@ Notes:
   disabled must not need more memory than the old code without your
   modification.
 
-* Remember that there is a size limit of 40 kB per message on the
-  u-boot-users mailing list. Bigger patches will be moderated. If
-  they are reasonable and not bigger than 100 kB, they will be
-  acknowledged. Even bigger patches should be avoided.
+* Remember that there is a size limit of 100 kB per message on the
+  u-boot mailing list. Bigger patches will be moderated. If they are
+  reasonable and not too big, they will be acknowledged. But patches
+  bigger than the size limit should be avoided.

board/afeb9260/partition.c

@@ -34,4 +34,3 @@ dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
 	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
 	{0x00008400, 0x00041FFF, FLAG_PROTECT_CLEAR, 0, "U-Boot"},
 };
-

board/amcc/canyonlands/init.S

@@ -89,7 +89,7 @@ tlbtab:
 #endif
 
 	/* TLB-entry for OCM */
-	tlbentry(CONFIG_SYS_OCM_BASE, SZ_16K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
 
 	/* TLB-entry for Local Configuration registers => peripherals */
 	tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS, 4, AC_R|AC_W|AC_X|SA_G|SA_I)

board/amcc/luan/luan.c

@@ -25,6 +25,7 @@
 #include <command.h>
 #include <ppc4xx.h>
 #include <asm/processor.h>
+#include <asm/ppc4xx-isram.h>
 #include <spd_sdram.h>
 #include "epld.h"
 
@@ -255,7 +256,7 @@ static int on_off( const char *s )
  ************************************************************************/
 static void l2cache_disable(void)
 {
-	mtdcr( l2_cache_cfg, 0 );
+	mtdcr( L2_CACHE_CFG, 0 );
 }
 
 
@@ -265,24 +266,24 @@ static void l2cache_disable(void)
  ************************************************************************/
 static void l2cache_enable(void)	/* see p258 7.4.1 Enabling L2 Cache */
 {
-	mtdcr( l2_cache_cfg, 0x80000000 );	/* enable L2_MODE L2_CFG[L2M] */
+	mtdcr( L2_CACHE_CFG, 0x80000000 );	/* enable L2_MODE L2_CFG[L2M] */
 
-	mtdcr( l2_cache_addr, 0 );		/* set L2_ADDR with all zeros */
+	mtdcr( L2_CACHE_ADDR, 0 );		/* set L2_ADDR with all zeros */
 
-	mtdcr( l2_cache_cmd, 0x80000000 );	/* issue HCLEAR command via L2_CMD */
+	mtdcr( L2_CACHE_CMD, 0x80000000 );	/* issue HCLEAR command via L2_CMD */
 
-	while (!(mfdcr( l2_cache_stat ) & 0x80000000 ))  ;; /* poll L2_SR for completion */
+	while (!(mfdcr( L2_CACHE_STAT ) & 0x80000000 ))  ;; /* poll L2_SR for completion */
 
-	mtdcr( l2_cache_cmd, 0x10000000 );	/* clear cache errors L2_CMD[CCP] */
+	mtdcr( L2_CACHE_CMD, 0x10000000 );	/* clear cache errors L2_CMD[CCP] */
 
-	mtdcr( l2_cache_cmd, 0x08000000 );	/* clear tag errors L2_CMD[CTE] */
+	mtdcr( L2_CACHE_CMD, 0x08000000 );	/* clear tag errors L2_CMD[CTE] */
 
-	mtdcr( l2_cache_snp0, 0 );		/* snoop registers */
-	mtdcr( l2_cache_snp1, 0 );
+	mtdcr( L2_CACHE_SNP0, 0 );		/* snoop registers */
+	mtdcr( L2_CACHE_SNP1, 0 );
 
 	__asm__ volatile ("sync");		/* msync */
 
-	mtdcr( l2_cache_cfg, 0xe0000000 );	/* inst and data use L2 */
+	mtdcr( L2_CACHE_CFG, 0xe0000000 );	/* inst and data use L2 */
 
 	__asm__ volatile ("sync");
 }
@@ -294,7 +295,7 @@ static void l2cache_enable(void)	/* see p258 7.4.1 Enabling L2 Cache */
  ************************************************************************/
 static int l2cache_status(void)
 {
-	return  (mfdcr( l2_cache_cfg ) & 0x60000000) != 0;
+	return  (mfdcr( L2_CACHE_CFG ) & 0x60000000) != 0;
 }
 
 

board/apollon/Makefile

@@ -25,9 +25,10 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= apollon.o mem.o sys_info.o
+COBJS-y	:= apollon.o mem.o sys_info.o
 SOBJS	:= lowlevel_init.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))

board/atmel/at91cap9adk/at91cap9adk.c

@@ -342,7 +342,7 @@ void lcd_show_board_info(void)
 	lcd_printf ("at91support@atmel.com\n");
 	lcd_printf ("%s CPU at %s MHz\n",
 		AT91_CPU_NAME,
-		strmhz(temp, AT91_MAIN_CLOCK));
+		strmhz(temp, AT91_CPU_CLOCK));
 
 	dram_size = 0;
 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)

board/atmel/at91sam9261ek/at91sam9261ek.c

@@ -225,7 +225,7 @@ void lcd_show_board_info(void)
 	lcd_printf ("at91support@atmel.com\n");
 	lcd_printf ("%s CPU at %s MHz\n",
 		AT91_CPU_NAME,
-		strmhz(temp, AT91_MAIN_CLOCK));
+		strmhz(temp, AT91_CPU_CLOCK));
 
 	dram_size = 0;
 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)

board/atmel/at91sam9263ek/at91sam9263ek.c

@@ -276,7 +276,7 @@ void lcd_show_board_info(void)
 	lcd_printf ("at91support@atmel.com\n");
 	lcd_printf ("%s CPU at %s MHz\n",
 		AT91_CPU_NAME,
-		strmhz(temp, AT91_MAIN_CLOCK));
+		strmhz(temp, AT91_CPU_CLOCK));
 
 	dram_size = 0;
 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)

board/atmel/at91sam9rlek/at91sam9rlek.c

@@ -197,7 +197,7 @@ void lcd_show_board_info(void)
 	lcd_printf ("at91support@atmel.com\n");
 	lcd_printf ("%s CPU at %s MHz\n",
 		AT91_CPU_NAME,
-		strmhz(temp, AT91_MAIN_CLOCK));
+		strmhz(temp, AT91_CPU_CLOCK));
 
 	dram_size = 0;
 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)

board/atum8548/atum8548.c

@@ -37,10 +37,6 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 long int fixed_sdram(void);
 
 int board_early_init_f (void)
@@ -117,12 +113,6 @@ initdram(int board_type)
 	dram_size = fixed_sdram ();
 #endif
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	puts("    DDR: ");
 	return dram_size;
 }

board/bf533-ezkit/Makefile

@@ -35,12 +35,11 @@ SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
-	mv -f $@.tmp $@
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
 
 clean:
 	rm -f $(SOBJS) $(OBJS)

board/bf533-ezkit/config.mk

@@ -1,4 +1,6 @@
 #
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
 # (C) Copyright 2001
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
@@ -23,3 +25,9 @@
 
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
+
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
+# Set some default LDR flags based on boot mode.
+LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
+LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf533-ezkit/u-boot.lds.S

@@ -28,6 +28,8 @@
 #include <config.h>
 #include <asm/blackfin.h>
 #undef ALIGN
+#undef ENTRY
+#undef bfin
 
 /* If we don't actually load anything into L1 data, this will avoid
  * a syntax error.  If we do actually load something into L1 data,
@@ -50,11 +52,12 @@ MEMORY
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
+ENTRY(_start)
 SECTIONS
 {
 	.text :
 	{
-		cpu/blackfin/start.o (.text)
+		cpu/blackfin/start.o (.text .text.*)
 
 #ifdef ENV_IS_EMBEDDED
 		/* WARNING - the following is hand-optimized to fit within
@@ -63,20 +66,20 @@ SECTIONS
 		 * it linked after the configuration sector.
 		 */
 
-		cpu/blackfin/traps.o		(.text)
-		cpu/blackfin/interrupt.o	(.text)
-		cpu/blackfin/serial.o		(.text)
-		common/dlmalloc.o		(.text)
-		lib_generic/crc32.o		(.text)
-		lib_generic/zlib.o		(.text)
-		board/bf533-ezkit/bf533-ezkit.o		(.text)
+		cpu/blackfin/traps.o		(.text .text.*)
+		cpu/blackfin/interrupt.o	(.text .text.*)
+		cpu/blackfin/serial.o		(.text .text.*)
+		common/dlmalloc.o		(.text .text.*)
+		lib_generic/crc32.o		(.text .text.*)
+		lib_generic/zlib.o		(.text .text.*)
+		board/bf533-ezkit/bf533-ezkit.o		(.text .text.*)
 
 		. = DEFINED(env_offset) ? env_offset : .;
-		common/env_embedded.o	(.text)
+		common/env_embedded.o	(.text .text.*)
 #endif
 
 		__initcode_start = .;
-		cpu/blackfin/initcode.o (.text)
+		cpu/blackfin/initcode.o (.text .text.*)
 		__initcode_end = .;
 
 		*(.text .text.*)

board/bf533-stamp/Makefile

@@ -35,12 +35,11 @@ SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
-	mv -f $@.tmp $@
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
 
 clean:
 	rm -f $(SOBJS) $(OBJS)

board/bf533-stamp/config.mk

@@ -1,4 +1,6 @@
 #
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
 # (C) Copyright 2001
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
@@ -23,3 +25,9 @@
 
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
+
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
+# Set some default LDR flags based on boot mode.
+LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
+LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf533-stamp/u-boot.lds.S

@@ -28,6 +28,8 @@
 #include <config.h>
 #include <asm/blackfin.h>
 #undef ALIGN
+#undef ENTRY
+#undef bfin
 
 /* If we don't actually load anything into L1 data, this will avoid
  * a syntax error.  If we do actually load something into L1 data,
@@ -50,11 +52,12 @@ MEMORY
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
+ENTRY(_start)
 SECTIONS
 {
 	.text :
 	{
-		cpu/blackfin/start.o (.text)
+		cpu/blackfin/start.o (.text .text.*)
 
 #ifdef ENV_IS_EMBEDDED
 		/* WARNING - the following is hand-optimized to fit within
@@ -63,18 +66,18 @@ SECTIONS
 		 * it linked after the configuration sector.
 		 */
 
-		cpu/blackfin/traps.o		(.text)
-		cpu/blackfin/interrupt.o	(.text)
-		cpu/blackfin/serial.o		(.text)
-		common/dlmalloc.o		(.text)
-		lib_generic/crc32.o		(.text)
+		cpu/blackfin/traps.o		(.text .text.*)
+		cpu/blackfin/interrupt.o	(.text .text.*)
+		cpu/blackfin/serial.o		(.text .text.*)
+		common/dlmalloc.o		(.text .text.*)
+		lib_generic/crc32.o		(.text .text.*)
 
 		. = DEFINED(env_offset) ? env_offset : .;
-		common/env_embedded.o	(.text)
+		common/env_embedded.o	(.text .text.*)
 #endif
 
 		__initcode_start = .;
-		cpu/blackfin/initcode.o (.text)
+		cpu/blackfin/initcode.o (.text .text.*)
 		__initcode_end = .;
 
 		*(.text .text.*)

board/bf537-stamp/Makefile

@@ -35,12 +35,11 @@ SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
-	mv -f $@.tmp $@
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
 
 clean:
 	rm -f $(SOBJS) $(OBJS)

board/bf537-stamp/config.mk

@@ -1,4 +1,6 @@
 #
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
 # (C) Copyright 2001
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
@@ -24,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
 # Set some default LDR flags based on boot mode.
-LDR_FLAGS-BFIN_BOOT_UART       := --port g --gpio 6
+LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
+LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf537-stamp/nand.c

@@ -87,7 +87,7 @@ int bfin_device_ready(struct mtd_info *mtd)
  * Members with a "?" were not set in the merged testing-NAND branch,
  * so they are not set here either.
  */
-void board_nand_init(struct nand_chip *nand)
+int board_nand_init(struct nand_chip *nand)
 {
 	*PORT(CONFIG_NAND_GPIO_PORT, _FER) &= ~BFIN_NAND_READY;
 	*PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY;
@@ -97,5 +97,7 @@ void board_nand_init(struct nand_chip *nand)
 	nand->ecc.mode = NAND_ECC_SOFT;
 	nand->dev_ready = bfin_device_ready;
 	nand->chip_delay = 30;
+
+	return 0;
 }
 #endif

board/bf537-stamp/u-boot.lds.S

@@ -28,6 +28,8 @@
 #include <config.h>
 #include <asm/blackfin.h>
 #undef ALIGN
+#undef ENTRY
+#undef bfin
 
 /* If we don't actually load anything into L1 data, this will avoid
  * a syntax error.  If we do actually load something into L1 data,
@@ -50,11 +52,12 @@ MEMORY
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
+ENTRY(_start)
 SECTIONS
 {
 	.text :
 	{
-		cpu/blackfin/start.o (.text)
+		cpu/blackfin/start.o (.text .text.*)
 
 #ifdef ENV_IS_EMBEDDED
 		/* WARNING - the following is hand-optimized to fit within
@@ -63,18 +66,18 @@ SECTIONS
 		 * it linked after the configuration sector.
 		 */
 
-		cpu/blackfin/traps.o		(.text)
-		cpu/blackfin/interrupt.o	(.text)
-		cpu/blackfin/serial.o		(.text)
-		common/dlmalloc.o		(.text)
-		lib_generic/crc32.o		(.text)
+		cpu/blackfin/traps.o		(.text .text.*)
+		cpu/blackfin/interrupt.o	(.text .text.*)
+		cpu/blackfin/serial.o		(.text .text.*)
+		common/dlmalloc.o		(.text .text.*)
+		lib_generic/crc32.o		(.text .text.*)
 
 		. = DEFINED(env_offset) ? env_offset : .;
-		common/env_embedded.o	(.text)
+		common/env_embedded.o	(.text .text.*)
 #endif
 
 		__initcode_start = .;
-		cpu/blackfin/initcode.o (.text)
+		cpu/blackfin/initcode.o (.text .text.*)
 		__initcode_end = .;
 
 		*(.text .text.*)

board/bf561-ezkit/Makefile

@@ -35,12 +35,11 @@ SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
-	mv -f $@.tmp $@
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
 
 clean:
 	rm -f $(SOBJS) $(OBJS)

board/bf561-ezkit/config.mk

@@ -1,4 +1,6 @@
 #
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
 # (C) Copyright 2001
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
@@ -23,3 +25,9 @@
 
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
+
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
+# Set some default LDR flags based on boot mode.
+LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
+LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf561-ezkit/u-boot.lds.S

@@ -28,6 +28,8 @@
 #include <config.h>
 #include <asm/blackfin.h>
 #undef ALIGN
+#undef ENTRY
+#undef bfin
 
 /* If we don't actually load anything into L1 data, this will avoid
  * a syntax error.  If we do actually load something into L1 data,
@@ -50,11 +52,12 @@ MEMORY
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
+ENTRY(_start)
 SECTIONS
 {
 	.text :
 	{
-		cpu/blackfin/start.o (.text)
+		cpu/blackfin/start.o (.text .text.*)
 
 #ifdef ENV_IS_EMBEDDED
 		/* WARNING - the following is hand-optimized to fit within
@@ -63,20 +66,20 @@ SECTIONS
 		 * it linked after the configuration sector.
 		 */
 
-		cpu/blackfin/traps.o		(.text)
-		cpu/blackfin/interrupt.o	(.text)
-		cpu/blackfin/serial.o		(.text)
-		common/dlmalloc.o		(.text)
-		lib_generic/crc32.o		(.text)
-		lib_generic/zlib.o		(.text)
-		board/bf561-ezkit/bf561-ezkit.o		(.text)
+		cpu/blackfin/traps.o		(.text .text.*)
+		cpu/blackfin/interrupt.o	(.text .text.*)
+		cpu/blackfin/serial.o		(.text .text.*)
+		common/dlmalloc.o		(.text .text.*)
+		lib_generic/crc32.o		(.text .text.*)
+		lib_generic/zlib.o		(.text .text.*)
+		board/bf561-ezkit/bf561-ezkit.o		(.text .text.*)
 
 		. = DEFINED(env_offset) ? env_offset : .;
-		common/env_embedded.o	(.text)
+		common/env_embedded.o	(.text .text.*)
 #endif
 
 		__initcode_start = .;
-		cpu/blackfin/initcode.o (.text)
+		cpu/blackfin/initcode.o (.text .text.*)
 		__initcode_end = .;
 
 		*(.text .text.*)

board/bmw/bmw.c

@@ -28,7 +28,7 @@
 #include <malloc.h>
 #include <devices.h>
 #include <net.h>
-#include <version.h>
+#include <timestamp.h>
 #include <dtt.h>
 #include <mpc824x.h>
 #include <asm/processor.h>
@@ -45,7 +45,7 @@ int checkboard(void)
     char  buf[32];
 
     puts ("Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)\n");
-    printf("Built: %s at %s\n", __DATE__ , __TIME__ );
+    printf("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
     /* printf("MPLD:  Revision %d\n", SYS_REVID_GET()); */
     printf("Local Bus at %s MHz\n", strmhz(buf, busfreq));
     return 0;

board/eXalion/eXalion.c

@@ -31,6 +31,7 @@
 #include <pci.h>
 #include <ide.h>
 #include <netdev.h>
+#include <timestamp.h>
 #include "piix_pci.h"
 #include "eXalion.h"
 
@@ -40,7 +41,7 @@ int checkboard (void)
 	char buf[32];
 
 	printf ("Board: eXalion MPC824x - CHRP (MAP B)\n");
-	printf ("Built: %s at %s\n", __DATE__, __TIME__);
+	printf ("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
 	printf ("Local Bus:  %s MHz\n", strmhz (buf, busfreq));
 
 	return 0;

board/esd/cpci405/Makefile

@@ -29,6 +29,7 @@ endif
 LIB	= $(obj)lib$(BOARD).a
 
 COBJS	= $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+COBJS	+= ../common/cmd_loadpci.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/esd/cpci405/config.mk

@@ -21,8 +21,4 @@
 # MA 02111-1307 USA
 #
 
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFFD0000
-endif
+TEXT_BASE = 0xFFFC0000

board/esd/cpci405/cpci405.c

@@ -20,8 +20,9 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-
 #include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <command.h>
@@ -31,16 +32,16 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);	/*cmd_boot.c*/
-#if 0
-#define FPGA_DEBUG
-#endif
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern void __ft_board_setup(void *blob, bd_t *bd);
+
+#undef FPGA_DEBUG
 
 /* fpga configuration data - generated by bin2cc */
 const unsigned char fpgadata[] =
 {
-#ifdef CONFIG_CPCI405_VER2
-# ifdef CONFIG_CPCI405AB
+#if defined(CONFIG_CPCI405_VER2)
+# if defined(CONFIG_CPCI405AB)
 #  include "fpgadata_cpci405ab.c"
 # else
 #  include "fpgadata_cpci4052.c"
@@ -56,7 +57,7 @@ const unsigned char fpgadata[] =
 #include "../common/fpga.c"
 #include "../common/auto_update.h"
 
-#ifdef CONFIG_CPCI405AB
+#if defined(CONFIG_CPCI405AB)
 au_image_t au_image[] = {
 	{"cpci405ab/preinst.img", 0, -1, AU_SCRIPT},
 	{"cpci405ab/pImage", 0xffc00000, 0x000c0000, AU_NOR},
@@ -65,7 +66,7 @@ au_image_t au_image[] = {
 	{"cpci405ab/postinst.img", 0, 0, AU_SCRIPT},
 };
 #else
-#ifdef CONFIG_CPCI405_VER2
+#if defined(CONFIG_CPCI405_VER2)
 au_image_t au_image[] = {
 	{"cpci4052/preinst.img", 0, -1, AU_SCRIPT},
 	{"cpci4052/pImage", 0xffc00000, 0x000c0000, AU_NOR},
@@ -91,7 +92,7 @@ int cpci405_version(void);
 int gunzip(void *, int, unsigned char *, unsigned long *);
 void lxt971_no_sleep(void);
 
-int board_early_init_f (void)
+int board_early_init_f(void)
 {
 #ifndef CONFIG_CPCI405_VER2
 	int index, len, i;
@@ -100,18 +101,19 @@ int board_early_init_f (void)
 
 #ifdef FPGA_DEBUG
 	/* set up serial port with default baudrate */
-	(void) get_clocks ();
+	(void)get_clocks();
 	gd->baudrate = CONFIG_BAUDRATE;
-	serial_init ();
+	serial_init();
 	console_init_f();
 #endif
 
 	/*
-	 * First pull fpga-prg pin low, to disable fpga logic (on version 2 board)
+	 * First pull fpga-prg pin low,
+	 * to disable fpga logic (on version 2 board)
 	 */
 	out32(GPIO0_ODR, 0x00000000);	     /* no open drain pins	*/
-	out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG);      /* setup for output	*/
-	out32(GPIO0_OR,  CONFIG_SYS_FPGA_PRG);      /* set output pins to high */
+	out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output	*/
+	out32(GPIO0_OR, CONFIG_SYS_FPGA_PRG); /* set output pins to high */
 	out32(GPIO0_OR, 0);		     /* pull prg low		*/
 
 	/*
@@ -124,39 +126,42 @@ int board_early_init_f (void)
 			/* booting FPGA failed */
 #ifndef FPGA_DEBUG
 			/* set up serial port with default baudrate */
-			(void) get_clocks ();
+			(void)get_clocks();
 			gd->baudrate = CONFIG_BAUDRATE;
-			serial_init ();
+			serial_init();
 			console_init_f();
 #endif
 			printf("\nFPGA: Booting failed ");
 			switch (status) {
 			case ERROR_FPGA_PRG_INIT_LOW:
-				printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+				printf("(Timeout: INIT not low after "
+				       "asserting PROGRAM*)\n ");
 				break;
 			case ERROR_FPGA_PRG_INIT_HIGH:
-				printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+				printf("(Timeout: INIT not high after "
+				       "deasserting PROGRAM*)\n ");
 				break;
 			case ERROR_FPGA_PRG_DONE:
-				printf("(Timeout: DONE not high after programming FPGA)\n ");
+				printf("(Timeout: DONE not high after "
+				       "programming FPGA)\n ");
 				break;
 			}
 
 			/* display infos on fpgaimage */
 			index = 15;
-			for (i=0; i<4; i++) {
+			for (i = 0; i < 4; i++) {
 				len = fpgadata[index];
-				printf("FPGA: %s\n", &(fpgadata[index+1]));
-				index += len+3;
+				printf("FPGA: %s\n", &(fpgadata[index + 1]));
+				index += len + 3;
 			}
-			putc ('\n');
+			putc('\n');
 			/* delayed reboot */
-			for (i=20; i>0; i--) {
+			for (i = 20; i > 0; i--) {
 				printf("Rebooting in %2d seconds \r",i);
-				for (index=0;index<1000;index++)
+				for (index = 0; index < 1000; index++)
 					udelay(1000);
 			}
-			putc ('\n');
+			putc('\n');
 			do_reset(NULL, 0, 0, NULL);
 		}
 	}
@@ -167,7 +172,7 @@ int board_early_init_f (void)
 	 * IRQ 16    405GP internally generated; active low; level sensitive
 	 * IRQ 17-24 RESERVED
 	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) CAN1 (+FPGA on CPCI4052) ; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) CAN1 (+FPGA on CPCI4052); active low; level sens.
 	 * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
 	 * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
 	 * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
@@ -177,7 +182,7 @@ int board_early_init_f (void)
 	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
 	mtdcr(uicer, 0x00000000);	/* disable all ints */
 	mtdcr(uiccr, 0x00000000);	/* set all to be non-critical*/
-#ifdef CONFIG_CPCI405_6U
+#if defined(CONFIG_CPCI405_6U)
 	if (cpci405_version() == 3) {
 		mtdcr(uicpr, 0xFFFFFF99);	/* set int polarities */
 	} else {
@@ -187,21 +192,20 @@ int board_early_init_f (void)
 	mtdcr(uicpr, 0xFFFFFF81);	/* set int polarities */
 #endif
 	mtdcr(uictr, 0x10000000);	/* set int trigger levels */
-	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority*/
+	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,
+					 * INT0 highest priority */
 	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
 
 	return 0;
 }
 
-/* ------------------------------------------------------------------------- */
-
 int ctermm2(void)
 {
-#ifdef CONFIG_CPCI405_VER2
+#if defined(CONFIG_CPCI405_VER2)
 	return 0;			/* no, board is cpci405 */
 #else
-	if ((*(unsigned char *)0xf0000400 == 0x00) &&
-	    (*(unsigned char *)0xf0000401 == 0x01))
+	if ((in_8((void*)0xf0000400) == 0x00) &&
+	    (in_8((void*)0xf0000401) == 0x01))
 		return 0;		/* no, board is cpci405 */
 	else
 		return -1;		/* yes, board is cterm-m2 */
@@ -228,8 +232,8 @@ int cpci405_version(void)
 	mtdcr(cntrl0, cntrl0Reg | 0x03000000);
 	out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000);
 	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000);
-	udelay(1000);			/* wait some time before reading input */
-	value = in_be32((void*)GPIO0_IR) & 0x00180000;	     /* get config bits */
+	udelay(1000); /* wait some time before reading input */
+	value = in_be32((void*)GPIO0_IR) & 0x00180000; /* get config bits */
 
 	/*
 	 * Restore GPIO settings
@@ -263,7 +267,7 @@ int misc_init_r (void)
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
 
-#ifdef CONFIG_CPCI405_VER2
+#if defined(CONFIG_CPCI405_VER2)
 	{
 	unsigned char *dst;
 	ulong len = sizeof(fpgadata);
@@ -283,9 +287,10 @@ int misc_init_r (void)
 		mtdcr(cntrl0, cntrl0Reg | 0x00300000);
 
 		dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
-		if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
-			printf ("GUNZIP ERROR - must RESET board to recover\n");
-			do_reset (NULL, 0, 0, NULL);
+		if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE,
+			   (uchar *)fpgadata, &len) != 0) {
+			printf("GUNZIP ERROR - must RESET board to recover\n");
+			do_reset(NULL, 0, 0, NULL);
 		}
 
 		status = fpga_boot(dst, len);
@@ -293,31 +298,34 @@ int misc_init_r (void)
 			printf("\nFPGA: Booting failed ");
 			switch (status) {
 			case ERROR_FPGA_PRG_INIT_LOW:
-				printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+				printf("(Timeout: INIT not low after "
+				       "asserting PROGRAM*)\n ");
 				break;
 			case ERROR_FPGA_PRG_INIT_HIGH:
-				printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+				printf("(Timeout: INIT not high after "
+				       "deasserting PROGRAM*)\n ");
 				break;
 			case ERROR_FPGA_PRG_DONE:
-				printf("(Timeout: DONE not high after programming FPGA)\n ");
+				printf("(Timeout: DONE not high after "
+				       "programming FPGA)\n ");
 				break;
 			}
 
 			/* display infos on fpgaimage */
 			index = 15;
-			for (i=0; i<4; i++) {
+			for (i = 0; i < 4; i++) {
 				len = dst[index];
-				printf("FPGA: %s\n", &(dst[index+1]));
-				index += len+3;
+				printf("FPGA: %s\n", &(dst[index + 1]));
+				index += len + 3;
 			}
-			putc ('\n');
+			putc('\n');
 			/* delayed reboot */
-			for (i=20; i>0; i--) {
-				printf("Rebooting in %2d seconds \r",i);
-				for (index=0;index<1000;index++)
+			for (i = 20; i > 0; i--) {
+				printf("Rebooting in %2d seconds \r", i);
+				for (index = 0; index < 1000; index++)
 					udelay(1000);
 			}
-			putc ('\n');
+			putc('\n');
 			do_reset(NULL, 0, 0, NULL);
 		}
 
@@ -328,12 +336,12 @@ int misc_init_r (void)
 
 		/* display infos on fpgaimage */
 		index = 15;
-		for (i=0; i<4; i++) {
+		for (i = 0; i < 4; i++) {
 			len = dst[index];
-			printf("%s ", &(dst[index+1]));
-			index += len+3;
+			printf("%s ", &(dst[index + 1]));
+			index += len + 3;
 		}
-		putc ('\n');
+		putc('\n');
 
 		free(dst);
 
@@ -345,68 +353,48 @@ int misc_init_r (void)
 		SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
 		udelay(1000); /* wait 1ms */
 
-#ifdef CONFIG_CPCI405_6U
+#if defined(CONFIG_CPCI405_6U)
+#error HIER GETH ES WEITER MIT IO ACCESSORS
 		if (cpci405_version() == 3) {
-			volatile unsigned short *fpga_mode = (unsigned short *)CONFIG_SYS_FPGA_BASE_ADDR;
-			volatile unsigned char *leds = (unsigned char *)CONFIG_SYS_LED_ADDR;
-
 			/*
 			 * Enable outputs in fpga on version 3 board
 			 */
-			*fpga_mode |= CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT;
+			out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
+				 in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) |
+				 CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT);
 
 			/*
 			 * Set outputs to 0
 			 */
-			*leds = 0x00;
+			out_8((void*)CONFIG_SYS_LED_ADDR, 0x00);
 
 			/*
 			 * Reset external DUART
 			 */
-			*fpga_mode |= CONFIG_SYS_FPGA_MODE_DUART_RESET;
+			out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
+				 in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) |
+				 CONFIG_SYS_FPGA_MODE_DUART_RESET);
 			udelay(100);
-			*fpga_mode &= ~(CONFIG_SYS_FPGA_MODE_DUART_RESET);
+			out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
+				 in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) &
+				 ~CONFIG_SYS_FPGA_MODE_DUART_RESET);
 		}
 #endif
 	}
 	else {
 		puts("\n*** U-Boot Version does not match Board Version!\n");
 		puts("*** CPCI-405 Version 1.x detected!\n");
-		puts("*** Please use correct U-Boot version (CPCI405 instead of CPCI4052)!\n\n");
+		puts("*** Please use correct U-Boot version "
+		     "(CPCI405 instead of CPCI4052)!\n\n");
 	}
 	}
-
 #else /* CONFIG_CPCI405_VER2 */
-
-#if 0 /* test-only: code-plug now not relavant for ip-address any more */
-	/*
-	 * Generate last byte of ip-addr from code-plug @ 0xf0000400
-	 */
-	if (ctermm2()) {
-		char str[32];
-		unsigned char ipbyte = *(unsigned char *)0xf0000400;
-
-		/*
-		 * Only overwrite ip-addr with allowed values
-		 */
-		if ((ipbyte != 0x00) && (ipbyte != 0xff)) {
-			bd->bi_ip_addr = (bd->bi_ip_addr & 0xffffff00) | ipbyte;
-			sprintf(str, "%ld.%ld.%ld.%ld",
-				(bd->bi_ip_addr & 0xff000000) >> 24,
-				(bd->bi_ip_addr & 0x00ff0000) >> 16,
-				(bd->bi_ip_addr & 0x0000ff00) >> 8,
-				(bd->bi_ip_addr & 0x000000ff));
-			setenv("ipaddr", str);
-		}
-	}
-#endif
-
 	if (cpci405_version() >= 2) {
 		puts("\n*** U-Boot Version does not match Board Version!\n");
 		puts("*** CPCI-405 Board Version 2.x detected!\n");
-		puts("*** Please use correct U-Boot version (CPCI4052 instead of CPCI405)!\n\n");
+		puts("*** Please use correct U-Boot version "
+		     "(CPCI4052 instead of CPCI405)!\n\n");
 	}
-
 #endif /* CONFIG_CPCI405_VER2 */
 
 	/*
@@ -415,46 +403,33 @@ int misc_init_r (void)
 	cntrl0Reg = mfdcr(cntrl0);
 	mtdcr(cntrl0, cntrl0Reg | 0x00001000);
 
-	return (0);
+	return 0;
 }
 
 /*
  * Check Board Identity:
  */
 
-int checkboard (void)
+int checkboard(void)
 {
 #ifndef CONFIG_CPCI405_VER2
 	int index;
 	int len;
 #endif
 	char str[64];
-	int i = getenv_r ("serial#", str, sizeof(str));
+	int i = getenv_r("serial#", str, sizeof(str));
 	unsigned short ver;
 
-	puts ("Board: ");
+	puts("Board: ");
 
-	if (i == -1) {
-		puts ("### No HW ID - assuming CPCI405");
-	} else {
+	if (i == -1)
+		puts("### No HW ID - assuming CPCI405");
+	else
 		puts(str);
-	}
 
 	ver = cpci405_version();
 	printf(" (Ver %d.x, ", ver);
 
-#if 0 /* test-only */
-	if (ver >= 2) {
-		volatile u16 *fpga_status = (u16 *)CONFIG_SYS_FPGA_BASE_ADDR + 1;
-
-		if (*fpga_status & CONFIG_SYS_FPGA_STATUS_FLASH) {
-			puts ("FLASH Bank B, ");
-		} else {
-			puts ("FLASH Bank A, ");
-		}
-	}
-#endif
-
 	if (ctermm2()) {
 		char str[4];
 
@@ -465,32 +440,31 @@ int checkboard (void)
 		setenv("boardid", str);
 		printf("CTERM-M2 - Id=%s)", str);
 	} else {
-		if (cpci405_host()) {
-			puts ("PCI Host Version)");
-		} else {
-			puts ("PCI Adapter Version)");
-		}
+		if (cpci405_host())
+			puts("PCI Host Version)");
+		else
+			puts("PCI Adapter Version)");
 	}
 
 #ifndef CONFIG_CPCI405_VER2
-	puts ("\nFPGA:	");
+	puts("\nFPGA:	");
 
 	/* display infos on fpgaimage */
 	index = 15;
-	for (i=0; i<4; i++) {
+	for (i = 0; i < 4; i++) {
 		len = fpgadata[index];
-		printf("%s ", &(fpgadata[index+1]));
-		index += len+3;
+		printf("%s ", &(fpgadata[index + 1]));
+		index += len + 3;
 	}
 #endif
 
-	putc ('\n');
+	putc('\n');
 	return 0;
 }
 
 void reset_phy(void)
 {
-#ifdef CONFIG_LXT971_NO_SLEEP
+#if defined(CONFIG_LXT971_NO_SLEEP)
 
 	/*
 	 * Disable sleep mode in LXT971
@@ -499,25 +473,24 @@ void reset_phy(void)
 #endif
 }
 
-#ifdef CONFIG_CPCI405_VER2
-#ifdef CONFIG_IDE_RESET
-
+#if defined(CONFIG_CPCI405_VER2) && defined (CONFIG_IDE_RESET)
 void ide_set_reset(int on)
 {
-	volatile unsigned short *fpga_mode = (unsigned short *)CONFIG_SYS_FPGA_BASE_ADDR;
-
 	/*
 	 * Assert or deassert CompactFlash Reset Pin
 	 */
-	if (on) {		/* assert RESET */
-		*fpga_mode &= ~(CONFIG_SYS_FPGA_MODE_CF_RESET);
-	} else {		/* release RESET */
-		*fpga_mode |= CONFIG_SYS_FPGA_MODE_CF_RESET;
+	if (on) {	/* assert RESET */
+		out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
+			 in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) &
+			 ~CONFIG_SYS_FPGA_MODE_CF_RESET);
+	} else {	/* release RESET */
+		out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
+			 in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) |
+			 CONFIG_SYS_FPGA_MODE_CF_RESET);
 	}
 }
 
-#endif /* CONFIG_IDE_RESET */
-#endif /* CONFIG_CPCI405_VER2 */
+#endif /* CONFIG_IDE_RESET && CONFIG_CPCI405_VER2 */
 
 #if defined(CONFIG_PCI)
 void cpci405_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
@@ -552,15 +525,44 @@ int pci_pre_init(struct pci_controller *hose)
 }
 #endif /* defined(CONFIG_PCI) */
 
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	int rc;
+
+	__ft_board_setup(blob, bd);
+
+	/*
+	 * Disable PCI in adapter mode.
+	 */
+	if (!cpci405_host()) {
+		rc = fdt_find_and_setprop(blob, "/plb/pci@ec000000", "status",
+					  "disabled", sizeof("disabled"), 1);
+		if (rc) {
+			printf("Unable to update property status in PCI node, "
+			       "err=%s\n",
+			       fdt_strerror(rc));
+		}
+	}
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+#if defined(CONFIG_CPCI405AB)
+#define ONE_WIRE_CLEAR	 out_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR +	\
+					  CONFIG_SYS_FPGA_MODE),	\
+				  in_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \
+						  CONFIG_SYS_FPGA_MODE)) | \
+					  CONFIG_SYS_FPGA_MODE_1WIRE_DIR)
 
-#ifdef CONFIG_CPCI405AB
+#define ONE_WIRE_SET	 out_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR +	\
+					  CONFIG_SYS_FPGA_MODE),	\
+				  in_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \
+						  CONFIG_SYS_FPGA_MODE)) & \
+					  ~CONFIG_SYS_FPGA_MODE_1WIRE_DIR)
 
-#define ONE_WIRE_CLEAR	 (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_MODE) \
-			  |= CONFIG_SYS_FPGA_MODE_1WIRE_DIR)
-#define ONE_WIRE_SET	 (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_MODE) \
-			  &= ~CONFIG_SYS_FPGA_MODE_1WIRE_DIR)
-#define ONE_WIRE_GET	 (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_STATUS) \
-			  & CONFIG_SYS_FPGA_MODE_1WIRE)
+#define ONE_WIRE_GET	 (in_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \
+					  CONFIG_SYS_FPGA_STATUS)) &  \
+			  CONFIG_SYS_FPGA_MODE_1WIRE)
 
 /*
  * Generate a 1-wire reset, return 1 if no presence detect was found,
@@ -630,7 +632,7 @@ void OWWriteByte(int data)
 {
 	int loop;
 
-	for (loop=0; loop<8; loop++) {
+	for (loop = 0; loop < 8; loop++) {
 		OWWriteBit(data & 0x01);
 		data >>= 1;
 	}
@@ -640,11 +642,10 @@ int OWReadByte(void)
 {
 	int loop, result = 0;
 
-	for (loop=0; loop<8; loop++) {
+	for (loop = 0; loop < 8; loop++) {
 		result >>= 1;
-		if (OWReadBit()) {
+		if (OWReadBit())
 			result |= 0x80;
-		}
 	}
 
 	return result;
@@ -652,7 +653,7 @@ int OWReadByte(void)
 
 int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	volatile unsigned short val;
+	unsigned short val;
 	int result;
 	int i;
 	unsigned char ow_id[6];
@@ -662,23 +663,25 @@ int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	/*
 	 * Clear 1-wire bit (open drain with pull-up)
 	 */
-	val = *(volatile unsigned short *)0xf0400000;
-	val &= ~0x1000; /* clear 1-wire bit */
-	*(volatile unsigned short *)0xf0400000 = val;
+	val = in_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR +
+			      CONFIG_SYS_FPGA_MODE));
+	val &= ~CONFIG_SYS_FPGA_MODE_1WIRE; /* clear 1-wire bit */
+	out_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR +
+			 CONFIG_SYS_FPGA_MODE), val);
 
 	result = OWTouchReset();
-	if (result != 0) {
+	if (result != 0)
 		puts("No 1-wire device detected!\n");
-	}
 
 	OWWriteByte(0x33); /* send read rom command */
 	OWReadByte(); /* skip family code ( == 0x01) */
-	for (i=0; i<6; i++) {
+	for (i = 0; i < 6; i++)
 		ow_id[i] = OWReadByte();
-	}
 	ow_crc = OWReadByte(); /* read crc */
 
-	sprintf(str, "%08X%04X", *(unsigned int *)&ow_id[0], *(unsigned short *)&ow_id[4]);
+	sprintf(str, "%08X%04X",
+		*(unsigned int *)&ow_id[0],
+		*(unsigned short *)&ow_id[4]);
 	printf("Setting environment variable 'ow_id' to %s\n", str);
 	setenv("ow_id", str);
 
@@ -690,8 +693,8 @@ U_BOOT_CMD(
 	NULL
 	);
 
-#define CONFIG_SYS_I2C_EEPROM_ADDR_2	0x51	/* EEPROM CAT28WC32		*/
-#define CONFIG_ENV_SIZE_2	0x800	/* 2048 bytes may be used for env vars*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT24WC32 */
+#define CONFIG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars */
 
 /*
  * Write backplane ip-address...
@@ -706,12 +709,14 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	IPaddr_t ipaddr;
 
 	buf = malloc(CONFIG_ENV_SIZE_2);
-	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) {
+	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0,
+			(uchar *)buf, CONFIG_ENV_SIZE_2))
 		puts("\nError reading backplane EEPROM!\n");
-	} else {
-		crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2-4);
+	else {
+		crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2 - 4);
 		if (crc != *(ulong *)buf) {
-			printf("ERROR: crc mismatch %08lx %08lx\n", crc, *(ulong *)buf);
+			printf("ERROR: crc mismatch %08lx %08lx\n",
+			       crc, *(ulong *)buf);
 			return -1;
 		}
 
@@ -768,12 +773,12 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	memset(buf, 0, CONFIG_ENV_SIZE_2);
 	sprintf(str, "bp_ip=%s", argv[1]);
 	strcpy(buf+4, str);
-	crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2-4);
+	crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2 - 4);
 	*(ulong *)buf = crc;
 
-	if (eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) {
+	if (eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR_2,
+			 0, (uchar *)buf, CONFIG_ENV_SIZE_2))
 		puts("\nError writing backplane EEPROM!\n");
-	}
 
 	free(buf);
 

board/esd/pci405/cmd_pci405.c

@@ -32,13 +32,9 @@
 
 #include "pci405.h"
 
-
 #if defined(CONFIG_CMD_BSP)
 
 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
-extern int do_bootvx (cmd_tbl_t *, int, int, char *[]);
-unsigned long get_dcr(unsigned short);
-
 
 /*
  * Command loadpci: wait for signal from host and boot image.
@@ -97,33 +93,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	} else {
 		sprintf(addr, "%08x", *ptr);
 
-#if 0
-		/*
-		 * Boot image
-		 */
-		if (*ptr & 0x00000001) {
-			/*
-			 * Boot VxWorks image via bootvx
-			 */
-			addr[strlen(addr)-1] = '0';
-			printf("\nBooting VxWorks-Image at addr 0x%s ...\n", addr);
-			setenv("loadaddr", addr);
-
-			local_args[0] = argv[0];
-			local_args[1] = NULL;
-			status = do_bootvx (cmdtp, 0, 1, local_args);
-		} else {
-			/*
-			 * Boot image via bootm (normally Linux)
-			 */
-			printf("\nBooting Image at addr 0x%s ...\n", addr);
-			setenv("loadaddr", addr);
-
-			local_args[0] = argv[0];
-			local_args[1] = NULL;
-			status = do_bootm (cmdtp, 0, 1, local_args);
-		}
-#else
 		/*
 		 * Boot image via bootm
 		 */
@@ -133,7 +102,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		local_args[0] = argv[0];
 		local_args[1] = NULL;
 		status = do_bootm (cmdtp, 0, 1, local_args);
-#endif
 	}
 
 	return 0;
@@ -143,843 +111,4 @@ U_BOOT_CMD(
 	"loadpci - Wait for pci-image and boot it\n",
 	NULL
 );
-
-#endif
-
-#if 1 /* test-only */
-int do_getpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int val;
-	int i;
-
-	printf("\nPCI Configuration Regs for PPC405GP:");
-	for (i=0; i<0x64; i+=4) {
-		pci_read_config_dword(PCIDEVID_405GP, i, &val);
-		if (!(i % 0x10)) {
-			printf("\n%02x: ", i);
-		}
-		printf("%08x ", val);
-	}
-	printf("\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	getpci,	1,	1,	do_getpci,
-	"getpci  - Print own pci configuration registers\n",
-	NULL
-);
-
-int do_setpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int val;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	val = simple_strtol (argv[2], NULL, 16);
-
-	printf("\nWriting %08x to PCI reg %08x.\n", val, addr);
-	pci_write_config_dword(PCIDEVID_405GP, addr, val);
-
-	return 0;
-}
-U_BOOT_CMD(
-	setpci,	3,	1,	do_setpci,
-	"setpci  - Set one pci configuration lword\n",
-	"<addr> <val>\n"
-	"        - Write pci configuration lword <val> to <addr>.\n"
-);
-
-int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	int i;
-
-	printf("\nDevice Configuration Registers (DCR's) for PPC405GP:");
-	for (i=0; i<=0x1e0; i++) {
-		if (!(i % 0x8)) {
-			printf("\n%04x ", i);
-		}
-		printf("%08lx ", get_dcr(i));
-	}
-	printf("\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	dumpdcr,	1,	1,	do_dumpdcr,
-	"dumpdcr - Dump all DCR registers\n",
-	NULL
-);
-
-
-int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	printf("\nSpecial Purpose Registers (SPR's) for PPC405GP:");
-	printf("\n%04x %08x ", 947, mfspr(947));
-	printf("\n%04x %08x ", 9, mfspr(9));
-	printf("\n%04x %08x ", 1014, mfspr(1014));
-	printf("\n%04x %08x ", 1015, mfspr(1015));
-	printf("\n%04x %08x ", 1010, mfspr(1010));
-	printf("\n%04x %08x ", 957, mfspr(957));
-	printf("\n%04x %08x ", 1008, mfspr(1008));
-	printf("\n%04x %08x ", 1018, mfspr(1018));
-	printf("\n%04x %08x ", 954, mfspr(954));
-	printf("\n%04x %08x ", 950, mfspr(950));
-	printf("\n%04x %08x ", 951, mfspr(951));
-	printf("\n%04x %08x ", 981, mfspr(981));
-	printf("\n%04x %08x ", 980, mfspr(980));
-	printf("\n%04x %08x ", 982, mfspr(982));
-	printf("\n%04x %08x ", 1012, mfspr(1012));
-	printf("\n%04x %08x ", 1013, mfspr(1013));
-	printf("\n%04x %08x ", 948, mfspr(948));
-	printf("\n%04x %08x ", 949, mfspr(949));
-	printf("\n%04x %08x ", 1019, mfspr(1019));
-	printf("\n%04x %08x ", 979, mfspr(979));
-	printf("\n%04x %08x ", 8, mfspr(8));
-	printf("\n%04x %08x ", 945, mfspr(945));
-	printf("\n%04x %08x ", 987, mfspr(987));
-	printf("\n%04x %08x ", 287, mfspr(287));
-	printf("\n%04x %08x ", 953, mfspr(953));
-	printf("\n%04x %08x ", 955, mfspr(955));
-	printf("\n%04x %08x ", 272, mfspr(272));
-	printf("\n%04x %08x ", 273, mfspr(273));
-	printf("\n%04x %08x ", 274, mfspr(274));
-	printf("\n%04x %08x ", 275, mfspr(275));
-	printf("\n%04x %08x ", 260, mfspr(260));
-	printf("\n%04x %08x ", 276, mfspr(276));
-	printf("\n%04x %08x ", 261, mfspr(261));
-	printf("\n%04x %08x ", 277, mfspr(277));
-	printf("\n%04x %08x ", 262, mfspr(262));
-	printf("\n%04x %08x ", 278, mfspr(278));
-	printf("\n%04x %08x ", 263, mfspr(263));
-	printf("\n%04x %08x ", 279, mfspr(279));
-	printf("\n%04x %08x ", 26, mfspr(26));
-	printf("\n%04x %08x ", 27, mfspr(27));
-	printf("\n%04x %08x ", 990, mfspr(990));
-	printf("\n%04x %08x ", 991, mfspr(991));
-	printf("\n%04x %08x ", 956, mfspr(956));
-	printf("\n%04x %08x ", 284, mfspr(284));
-	printf("\n%04x %08x ", 285, mfspr(285));
-	printf("\n%04x %08x ", 986, mfspr(986));
-	printf("\n%04x %08x ", 984, mfspr(984));
-	printf("\n%04x %08x ", 256, mfspr(256));
-	printf("\n%04x %08x ", 1, mfspr(1));
-	printf("\n%04x %08x ", 944, mfspr(944));
-	printf("\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	dumpspr,	1,	1,	do_dumpspr,
-	"dumpspr - Dump all SPR registers\n",
-	NULL
-);
-
-
-#define PCI0_BRDGOPT1 0x4a
-#define plb0_acr      0x87
-
-int do_getplb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned short val;
-
-	printf("PLB0_ACR=%08lx\n", get_dcr(0x87));
-	pci_read_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, &val);
-	printf("PCI0_BRDGOPT1=%04x\n", val);
-	printf("CCR0=%08x\n", mfspr(ccr0));
-
-	return 0;
-}
-U_BOOT_CMD(
-	getplb,	1,	1,	do_getplb,
-	"getplb  - Dump all plb arbiter registers\n",
-	NULL
-);
-
-int do_setplb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int my_acr;
-	unsigned int my_brdgopt1;
-	unsigned int my_ccr0;
-
-	my_acr = simple_strtol (argv[1], NULL, 16);
-	my_brdgopt1 = simple_strtol (argv[2], NULL, 16);
-	my_ccr0 = simple_strtol (argv[3], NULL, 16);
-
-	mtdcr(plb0_acr, my_acr);
-	pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, my_brdgopt1);
-	mtspr(ccr0, my_ccr0);
-
-	return 0;
-}
-U_BOOT_CMD(
-	setplb,	4,	1,	do_setplb,
-	"setplb  - Set all plb arbiter registers\n",
-	"PLB0_ACR PCI0_BRDGOPT1 CCR0\n"
-	"        - Set all plb arbiter registers\n"
-);
-
-
-/***********************************************************************
- *
- * The following code is only for test purposes!!!!
- * Please ignore this ugly stuff!!!!!!!!!!!!!!!!!!!
- *
- ***********************************************************************/
-
-#define PCI_ADDR 0xc0000000
-
-int do_writepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax;
-	int i;
-	int max;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-	int loopcount = 0;
-	int test_pci_read = 0;
-	int test_pci_cfg_write = 0;
-	int test_sync = 0;
-	int test_pci_pre_read = 0;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-	countmax = simple_strtol (argv[3], NULL, 16);
-	if (countmax == 0)
-		countmax = 1000;
-
-	do_getplb(NULL, 0, 0, NULL);
-
-#if 0
-	out32r(PMM0LA, 0);
-	out32r(PMM0PCILA, 0);
-	out32r(PMM0PCIHA, 0);
-	out32r(PMM0MA, 0);
-	out32r(PMM1LA, PCI_ADDR);
-	out32r(PMM1PCILA, addr & 0xff000000);
-	out32r(PMM1PCIHA, 0x00000000);
-	out32r(PMM1MA, 0xff000001);
-#endif
-
-	printf("PMM1LA    =%08lx\n", in32r(PMM1LA));
-	printf("PMM1MA    =%08lx\n", in32r(PMM1MA));
-	printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA));
-	printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA));
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-
-	max = size >> 2;
-
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	val = *(ulong *)0x00000000;
-	if (val & 0x00000008) {
-		test_pci_pre_read = 1;
-		printf("Running test with pre pci-memory-read access!\n");
-	}
-	if (val & 0x00000004) {
-		test_sync = 1;
-		printf("Running test with sync instruction!\n");
-	}
-	if (val & 0x00000001) {
-		test_pci_read = 1;
-		printf("Running test with pci-memory-read access!\n");
-	}
-	if (val & 0x00000002) {
-		test_pci_cfg_write = 1;
-		printf("Running test with pci-config-write access!\n");
-	}
-
-	while (1) {
-
-		if (test_pci_pre_read) {
-			/*
-			 * Read one value back
-			 */
-			ptr = (volatile unsigned long *)addr;
-			val = *ptr;
-		}
-
-		/*
-		 * Write some values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		for (i=0; i<max; i++) {
-			*ptr++ = i;
-		}
-
-		if (test_sync) {
-			/*
-			 * Sync previous writes
-			 */
-			ppcSync();
-		}
-
-		if (test_pci_read) {
-			/*
-			 * Read one value back
-			 */
-			ptr = (volatile unsigned long *)addr;
-			val = *ptr;
-		}
-
-		if (test_pci_cfg_write) {
-			/*
-			 * Generate IRQ to host via config regs
-			 */
-			pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00);
-		}
-
-		if (loopcount++ > countmax) {
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			putc('.');
-
-			loopcount = 0;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci,	4,	1,	do_writepci,
-	"writepci - Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-#define PCI_CFGADDR        0xeec00000
-#define PCI_CFGDATA        0xeec00004
-
-int ibmPciConfigWrite
-(
-	int offset,     /* offset into the configuration space */
-	int width,      /* data width                          */
-	unsigned int data       /* data to be written                  */
-	)
-{
-	/*
-	 * Write config register address to the PCI config address register
-	 * bit 31 must be 1 and bits 1:0 must be 0 (note LE bit notation)
-	 */
-	out32r(PCI_CFGADDR, 0x80000000 | (offset & 0xFFFFFFFC));
-
-#if 0 /* test-only */
-	ppcSync();
-#endif
-
-	/*
-	 * Write value to be written to the PCI config data register
-	 */
-	switch ( width ) {
-	case 1: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned char)(data & 0xFF));
-		break;
-	case 2: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned short)(data & 0xFFFF));
-		break;
-	case 4:	out32r(PCI_CFGDATA | (offset & 0x3), data);
-		break;
-	}
-
-	return (0);
-}
-
-int do_writepci2(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax;
-	int max;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-	int loopcount = 0;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-	countmax = simple_strtol (argv[3], NULL, 16);
-	if (countmax == 0)
-		countmax = 1000;
-
-	do_getplb(NULL, 0, 0, NULL);
-
-#if 0
-	out32r(PMM0LA, 0);
-	out32r(PMM0PCILA, 0);
-	out32r(PMM0PCIHA, 0);
-	out32r(PMM0MA, 0);
-	out32r(PMM1LA, PCI_ADDR);
-	out32r(PMM1PCILA, addr & 0xff000000);
-	out32r(PMM1PCIHA, 0x00000000);
-	out32r(PMM1MA, 0xff000001);
-#endif
-
-	printf("PMM1LA    =%08lx\n", in32r(PMM1LA));
-	printf("PMM1MA    =%08lx\n", in32r(PMM1MA));
-	printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA));
-	printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA));
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-
-	max = size >> 2;
-
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	while (1) {
-
-		/*
-		 * Write one values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		*ptr = 0x01234567;
-
-		/*
-		 * Read one value back
-		 */
-		ptr = (volatile unsigned long *)addr;
-		val = *ptr;
-
-		/*
-		 * One pci config write
-		 */
-/*		pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */
-/*		ibmPciConfigWrite(0x44, 1, 0x00); */
-		ibmPciConfigWrite(0x2e, 2, 0x1234); /* subsystem id */
-
-		if (loopcount++ > countmax) {
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			putc('.');
-
-			loopcount = 0;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci2,	4,	1,	do_writepci2,
-	"writepci2- Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_writepci22(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax = 0;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	while (1) {
-
-		/*
-		 * Write one values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		*ptr = 0x01234567;
-
-		/*
-		 * Read one value back
-		 */
-		ptr = (volatile unsigned long *)addr;
-		val = *ptr;
-
-		/*
-		 * One pci config write
-		 */
-		ibmPciConfigWrite(0x2e, 2, 0x1234); /* subsystem id */
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci22,	4,	1,	do_writepci22,
-	"writepci22- Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int ibmPciConfigWrite3
-(
-	int offset,     /* offset into the configuration space */
-	int width,      /* data width                          */
-	unsigned int data       /* data to be written                  */
-	)
-{
-	/*
-	 * Write config register address to the PCI config address register
-	 * bit 31 must be 1 and bits 1:0 must be 0 (note LE bit notation)
-	 */
-	out32r(PCI_CFGADDR, 0x80000000 | (offset & 0xFFFFFFFC));
-
-#if 1 /* test-only */
-	ppcSync();
-#endif
-
-	/*
-	 * Write value to be written to the PCI config data register
-	 */
-	switch ( width ) {
-	case 1: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned char)(data & 0xFF));
-		break;
-	case 2: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned short)(data & 0xFFFF));
-		break;
-	case 4:	out32r(PCI_CFGDATA | (offset & 0x3), data);
-		break;
-	}
-
-	return (0);
-}
-
-int do_writepci3(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax;
-	int max;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-	int loopcount = 0;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-	countmax = simple_strtol (argv[3], NULL, 16);
-	if (countmax == 0)
-		countmax = 1000;
-
-	do_getplb(NULL, 0, 0, NULL);
-
-#if 0
-	out32r(PMM0LA, 0);
-	out32r(PMM0PCILA, 0);
-	out32r(PMM0PCIHA, 0);
-	out32r(PMM0MA, 0);
-	out32r(PMM1LA, PCI_ADDR);
-	out32r(PMM1PCILA, addr & 0xff000000);
-	out32r(PMM1PCIHA, 0x00000000);
-	out32r(PMM1MA, 0xff000001);
-#endif
-
-	printf("PMM1LA    =%08lx\n", in32r(PMM1LA));
-	printf("PMM1MA    =%08lx\n", in32r(PMM1MA));
-	printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA));
-	printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA));
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-
-	max = size >> 2;
-
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	while (1) {
-
-		/*
-		 * Write one values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		*ptr = 0x01234567;
-
-		/*
-		 * Read one value back
-		 */
-		ptr = (volatile unsigned long *)addr;
-		val = *ptr;
-
-		/*
-		 * One pci config write
-		 */
-/*		pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */
-/*		ibmPciConfigWrite(0x44, 1, 0x00); */
-		ibmPciConfigWrite3(0x2e, 2, 0x1234); /* subsystem id */
-
-		if (loopcount++ > countmax) {
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			putc('.');
-
-			loopcount = 0;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci3,	4,	1,	do_writepci3,
-	"writepci3- Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-
-#define SECTOR_SIZE	32		/* 32 byte cache line */
-#define SECTOR_MASK	0x1F
-
-void my_flush_dcache(ulong lcl_addr, ulong count)
-{
-  unsigned int lcl_target;
-
-  /* promote to nearest cache sector */
-  lcl_target =  (lcl_addr + count + SECTOR_SIZE - 1) & ~SECTOR_MASK;
-  lcl_addr &= ~SECTOR_MASK;
-  while (lcl_addr != lcl_target)
-    {
-      /*      ppcDcbf((void *)lcl_addr);*/
-      __asm__("dcbf 0,%0": :"r" (lcl_addr));
-      lcl_addr += SECTOR_SIZE;
-    }
-  __asm__("sync");		/* Always flush prefetch queue in any case */
-}
-
-int do_writepci_cache(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax;
-	int i;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-	int loopcount = 0;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-	countmax = simple_strtol (argv[3], NULL, 16);
-	if (countmax == 0)
-		countmax = 1000;
-
-	do_getplb(NULL, 0, 0, NULL);
-
-#if 0
-	out32r(PMM0LA, 0);
-	out32r(PMM0PCILA, 0);
-	out32r(PMM0PCIHA, 0);
-	out32r(PMM0MA, 0);
-	out32r(PMM1LA, PCI_ADDR);
-	out32r(PMM1PCILA, addr & 0xff000000);
-	out32r(PMM1PCIHA, 0x00000000);
-	out32r(PMM1MA, 0xff000001);
-#endif
-
-	printf("PMM1LA    =%08lx\n", in32r(PMM1LA));
-	printf("PMM1MA    =%08lx\n", in32r(PMM1MA));
-	printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA));
-	printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA));
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	i = 0;
-
-	/*
-	 * Set pci region as cachable
-	 */
-	ppcSync();
-	__asm__ volatile ("	addis	4,0,0x0000 ");
-	__asm__ volatile ("	addi	4,4,0x0080 ");
-	__asm__ volatile ("	mtdccr	4 ");
-	ppcSync();
-
-	while (1) {
-
-		/*
-		 * Write one values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		printf("A\n"); /* test-only */
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		printf("B\n"); /* test-only */
-		my_flush_dcache(addr, 32);
-		printf("C\n"); /* test-only */
-
-		/*
-		 * Read one value back
-		 */
-		ptr = (volatile unsigned long *)addr;
-		val = *ptr;
-		printf("D\n"); /* test-only */
-
-		/*
-		 * One pci config write
-		 */
-/*		pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */
-/*		ibmPciConfigWrite(0x44, 1, 0x00); */
-		ibmPciConfigWrite3(0x2e, 2, 0x1234); /* subsystem id */
-		printf("E\n"); /* test-only */
-
-		if (loopcount++ > countmax) {
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			putc('.');
-
-			loopcount = 0;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci_cache,	4,	1,	do_writepci_cache,
-	"writepci_cache - Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_savepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int *ptr;
-	int i;
-
-	/*
-	 * Save own pci configuration in PRAM
-	 */
-	memset((char *)PCI_REGS_ADDR, 0, PCI_REGS_LEN);
-	ptr = (unsigned int *)PCI_REGS_ADDR + 1;
-	for (i=0; i<0x40; i+=4) {
-		pci_read_config_dword(PCIDEVID_405GP, i, ptr++);
-	}
-	ptr = (unsigned int *)PCI_REGS_ADDR;
-	*ptr = crc32(0, (uchar *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4);
-
-	printf("\nStoring PCI Configuration Regs...\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	savepci,	4,	1,	do_savepci,
-	"savepci  - Save all pci regs\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_restorepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int *ptr;
-	int i;
-
-	/*
-	 * Rewrite pci config regs (only after soft-reset with magic set)
-	 */
-	ptr = (unsigned int *)PCI_REGS_ADDR;
-	if (crc32(0, (uchar *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4) == *ptr) {
-		puts("Restoring PCI Configurations Regs!\n");
-		ptr = (unsigned int *)PCI_REGS_ADDR + 1;
-		for (i=0; i<0x40; i+=4) {
-			pci_write_config_dword(PCIDEVID_405GP, i, *ptr++);
-		}
-	}
-	mtdcr(uicsr, 0xFFFFFFFF);        /* clear all ints */
-
-	return 0;
-}
-U_BOOT_CMD(
-	restorepci,	4,	1,	do_restorepci,
-	"restorepci  - Restore all pci regs\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-
-extern void write_without_sync(void);
-extern void write_with_sync(void);
-extern void write_with_less_sync(void);
-extern void write_with_more_sync(void);
-
-/*
- * code from IBM-PPCSUPP
- */
-int do_writeibm1(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	write_without_sync();
-
-	return 0;
-}
-U_BOOT_CMD(
-	writeibm1,	4,	1,	do_writeibm1,
-	"writeibm1- Write some data to pcibus (without sync)\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_writeibm2(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	write_with_sync();
-
-	return 0;
-}
-U_BOOT_CMD(
-	writeibm2,	4,	1,	do_writeibm2,
-	"writeibm2- Write some data to pcibus (with sync)\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_writeibm22(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	write_with_less_sync();
-
-	return 0;
-}
-U_BOOT_CMD(
-	writeibm22,	4,	1,	do_writeibm22,
-	"writeibm22- Write some data to pcibus (with less sync)\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_writeibm3(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	write_with_more_sync();
-
-	return 0;
-}
-U_BOOT_CMD(
-	writeibm3,	4,	1,	do_writeibm3,
-	"writeibm3- Write some data to pcibus (with more sync)\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
 #endif

board/esd/pci405/pci405.c

@@ -27,6 +27,7 @@
 #include <malloc.h>
 #include <pci.h>
 #include <asm/4xx_pci.h>
+#include <asm/io.h>
 
 #include "pci405.h"
 
@@ -34,7 +35,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 /* Prototypes */
 int gunzip(void *, int, unsigned char *, unsigned long *);
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);/*cmd_boot.c*/
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 unsigned long fpga_done_state(void);
 unsigned long fpga_init_state(void);
 
@@ -57,11 +58,11 @@ const unsigned char fpgadata[] =
  */
 #include "../common/fpga.c"
 
-#define FPGA_DONE_STATE_V11 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_DONE)
-#define FPGA_DONE_STATE_V12 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_DONE_V12)
+#define FPGA_DONE_STATE_V11 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_DONE)
+#define FPGA_DONE_STATE_V12 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_DONE_V12)
 
-#define FPGA_INIT_STATE_V11 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_INIT)
-#define FPGA_INIT_STATE_V12 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_INIT_V12)
+#define FPGA_INIT_STATE_V11 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_INIT)
+#define FPGA_INIT_STATE_V12 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_INIT_V12)
 
 
 int board_revision(void)
@@ -78,10 +79,10 @@ int board_revision(void)
 	 */
 	cntrl0Reg = mfdcr(cntrl0);
 	mtdcr(cntrl0, cntrl0Reg | 0x03000000);
-	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x00100200);
-	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x00100200);
+	out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00100200);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00100200);
 	udelay(1000);                   /* wait some time before reading input */
-	value = in32(GPIO0_IR) & 0x00100200;       /* get config bits */
+	value = in_be32((void*)GPIO0_IR) & 0x00100200;       /* get config bits */
 
 	/*
 	 * Restore GPIO settings
@@ -137,10 +138,10 @@ int board_early_init_f (void)
 	/*
 	 * First pull fpga-prg pin low, to disable fpga logic (on version 1.2 board)
 	 */
-	out32(GPIO0_ODR, 0x00000000);        /* no open drain pins      */
-	out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG);      /* setup for output        */
-	out32(GPIO0_OR,  CONFIG_SYS_FPGA_PRG);      /* set output pins to high */
-	out32(GPIO0_OR, 0);                  /* pull prg low            */
+	out_be32((void*)GPIO0_ODR, 0x00000000);        /* no open drain pins      */
+	out_be32((void*)GPIO0_TCR, CONFIG_SYS_FPGA_PRG);      /* setup for output        */
+	out_be32((void*)GPIO0_OR,  CONFIG_SYS_FPGA_PRG);      /* set output pins to high */
+	out_be32((void*)GPIO0_OR, 0);                  /* pull prg low            */
 
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -181,15 +182,6 @@ int board_early_init_f (void)
 	return 0;
 }
 
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
-
 int misc_init_r (void)
 {
 	unsigned char *dst;
@@ -284,13 +276,11 @@ int misc_init_r (void)
 		*magic = 0;      /* clear pci reconfig magic again */
 	}
 
-#if 1 /* test-only */
 	/*
 	 * Decrease PLB latency timeout and reduce priority of the PCI bridge master
 	 */
 #define PCI0_BRDGOPT1 0x4a
 	pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f20);
-/*	pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f60);	*/
 
 #define plb0_acr      0x87
 	/*
@@ -298,14 +288,6 @@ int misc_init_r (void)
 	 */
 	mtdcr(plb0_acr, 0x98000000);
 
-#if 0 /* test-only */
-	printf("CCR0=%08x\n", mfspr(ccr0)); /* test-only */
-/*	mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00100000);	*/
-	mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00000000);
-#endif
-/*	printf("CCR0=%08x\n", mfspr(ccr0)); */ /* test-only */
-#endif
-
 	free(dst);
 	return (0);
 }
@@ -314,7 +296,6 @@ int misc_init_r (void)
 /*
  * Check Board Identity:
  */
-
 int checkboard (void)
 {
 	char str[64];
@@ -340,10 +321,10 @@ int checkboard (void)
 		 */
 		cntrl0Reg = mfdcr(cntrl0);
 		mtdcr(cntrl0, cntrl0Reg & ~0x08000000);
-		out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x40000000);
-		out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x40000000);
+		out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x40000000);
+		out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x40000000);
 		udelay(1000);                   /* wait some time before reading input */
-		value = in32(GPIO0_IR) & 0x40000000;       /* get config bits */
+		value = in_be32((void*)GPIO0_IR) & 0x40000000;       /* get config bits */
 		if (value) {
 			puts(", 33 MHz PCI");
 		} else {

board/esd/plu405/plu405.c

@@ -104,6 +104,7 @@ int misc_init_r (void)
 	unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
 	unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
 	unsigned char *dst;
+	unsigned char fctr;
 	ulong len = sizeof(fpgadata);
 	int status;
 	int index;
@@ -203,6 +204,15 @@ int misc_init_r (void)
 	out_8(duart0_mcr, 0x08);
 	out_8(duart1_mcr, 0x08);
 
+	/*
+	 * Enable auto RS485 mode in 2nd external uart
+	 */
+	out_8((void *)DUART1_BA + 3, 0xbf); /* write LCR */
+	fctr = in_8((void *)DUART1_BA + 1); /* read FCTR */
+	fctr |= 0x08;                       /* enable RS485 mode */
+	out_8((void *)DUART1_BA + 1, fctr); /* write FCTR */
+	out_8((void *)DUART1_BA + 3, 0);    /* write LCR */
+
 	return (0);
 }
 

board/esd/pmc440/cmd_pmc440.c

@@ -364,7 +364,7 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD;
 #endif
 	/*
-	 * gd->bd->bi_memsize == physical ram size - CFG_MEM_TOP_HIDE
+	 * gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MEM_TOP_HIDE
 	 */
 	param = base - (pram << 10);
 	printf("PARAM: @%08x\n", param);

board/esd/pmc440/pmc440.c

@@ -107,7 +107,7 @@ int board_early_init_f(void)
 	 * Setup the GPIO pins
 	 * TODO: setup GPIOs via CONFIG_SYS_4xx_GPIO_TABLE in board's config file
 	 */
-	out32(GPIO0_OR,    0x40000002);
+	out32(GPIO0_OR,    0x40000102);
 	out32(GPIO0_TCR,   0x4c90011f);
 	out32(GPIO0_OSRL,  0x28051400);
 	out32(GPIO0_OSRH,  0x55005000);
@@ -755,17 +755,31 @@ int post_hotkeys_pressed(void)
 #ifdef CONFIG_RESET_PHY_R
 void reset_phy(void)
 {
+	char *s;
+	unsigned short val_method, val_behavior;
+
+	/* special LED setup for NGCC/CANDES */
+	if ((s = getenv("bd_type")) &&
+	    ((!strcmp(s, "ngcc")) || (!strcmp(s, "candes")))) {
+		val_method   = 0x0e0a;
+		val_behavior = 0x0cf2;
+	} else {
+		/* PMC440 standard type */
+		val_method   = 0x0e10;
+		val_behavior = 0x0cf0;
+	}
+
 	if (miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0001) == 0) {
 		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0010);
-		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0df0);
-		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, 0x0e10);
+		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, val_behavior);
+		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, val_method);
 		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0000);
 	}
 
 	if (miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0001) == 0) {
 		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0010);
-		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0df0);
-		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, 0x0e10);
+		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, val_behavior);
+		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, val_method);
 		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0000);
 	}
 }

board/evb64260/zuma_pbb.c

@@ -149,8 +149,10 @@ void zuma_init_pbb (void)
 
 	pci_read_config_dword (dev, PCI_BASE_ADDRESS_0, &iobase);
 
-	zuma_pbb_reg =
-			(PBB_DMA_REG_MAP *) (iobase & PCI_BASE_ADDRESS_MEM_MASK);
+	iobase &= PCI_BASE_ADDRESS_MEM_MASK;
+
+	zuma_pbb_reg = (PBB_DMA_REG_MAP *)iobase;
+
 
 	if (!zuma_pbb_reg) {
 		printf ("zuma pbb bar none! (hah hah, get it?)\n");

board/evb64260/zuma_pbb_mbox.c

@@ -165,7 +165,9 @@ int zuma_mbox_init(void)
 
   pci_read_config_dword(zuma_mbox_dev.dev, PCI_BASE_ADDRESS_0, &iobase);
 
-  zuma_mbox_dev.sip = (PBB_DMA_REG_MAP *) (iobase & PCI_BASE_ADDRESS_MEM_MASK);
+  iobase &= PCI_BASE_ADDRESS_MEM_MASK;
+
+  zuma_mbox_dev.sip = (PBB_DMA_REG_MAP *)iobase;
 
   zuma_mbox_dev.sip->int_mask.word=0;
 

board/freescale/mpc8536ds/mpc8536ds.c

@@ -41,10 +41,6 @@
 #include "../common/pixis.h"
 #include "../common/sgmii_riser.h"
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 phys_size_t fixed_sdram(void);
 
 int checkboard (void)
@@ -65,20 +61,12 @@ initdram(int board_type)
 
 #ifdef CONFIG_SPD_EEPROM
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
 #else
 	dram_size = fixed_sdram();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	puts("    DDR: ");
 	return dram_size;
 }

board/freescale/mpc8540ads/mpc8540ads.c

@@ -133,7 +133,7 @@ local_bus_init(void)
 	 */
 
 	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {

board/freescale/mpc8541cds/mpc8541cds.c

@@ -308,7 +308,7 @@ local_bus_init(void)
 	 */
 
 	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {

board/freescale/mpc8544ds/mpc8544ds.c

@@ -38,10 +38,6 @@
 #include "../common/pixis.h"
 #include "../common/sgmii_riser.h"
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 int checkboard (void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -77,12 +73,6 @@ initdram(int board_type)
 
 	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	puts("    DDR: ");
 	return dram_size;
 }
@@ -131,7 +121,7 @@ pci_init_board(void)
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
 	struct pci_controller *hose = &pcie3_hose;
 	int pcie_ep = (host_agent == 1);
-	int pcie_configured  = io_sel >= 1;
+	int pcie_configured  = io_sel >= 6;
 	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
@@ -198,7 +188,7 @@ pci_init_board(void)
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep = (host_agent == 5);
-	int pcie_configured  = io_sel & 6;
+	int pcie_configured  = io_sel >= 2;
 	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
@@ -261,7 +251,7 @@ pci_init_board(void)
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
 	struct pci_controller *hose = &pcie2_hose;
 	int pcie_ep = (host_agent == 3);
-	int pcie_configured  = io_sel & 4;
+	int pcie_configured  = io_sel >= 4;
 	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){

board/freescale/mpc8548cds/mpc8548cds.c

@@ -38,10 +38,6 @@
 #include "../common/eeprom.h"
 #include "../common/via.h"
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 
 void local_bus_init(void);
@@ -56,7 +52,6 @@ int checkboard (void)
 	uint pci_slot = get_pci_slot ();
 
 	uint cpu_board_rev = get_cpu_board_revision ();
-	uint svr;
 
 	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
 		get_board_version (), pci_slot);
@@ -69,17 +64,6 @@ int checkboard (void)
 	 */
 	local_bus_init ();
 
-	svr = get_svr();
-
-	/*
-	 * Fix CPU2 errata: A core hang possible while executing a
-	 * msync instruction and a snoopable transaction from an I/O
-	 * master tagged to make quick forward progress is present.
-	 * Fixed in Silicon Rev.2.1
-	 */
-	if (!(SVR_MAJ(svr) >= 2 && SVR_MIN(svr) >= 1))
-		ecm->eebpcr |= (1 << 16);
-
 	/*
 	 * Hack TSEC 3 and 4 IO voltages.
 	 */
@@ -118,13 +102,6 @@ initdram(int board_type)
 	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
 	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
 	/*
 	 * SDRAM Initialization
 	 */
@@ -148,7 +125,7 @@ local_bus_init(void)
 	sys_info_t sysinfo;
 
 	get_sys_info(&sysinfo);
-	clkdiv = (lbc->lcrr & 0x0f) * 2;
+	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	gur->lbiuiplldcr1 = 0x00078080;
@@ -355,7 +332,7 @@ pci_init_board(void)
 		first_free_busno=hose->last_busno+1;
 		printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
 #ifdef CONFIG_PCIX_CHECK
-		if (!(gur->pordevsr & PORDEVSR_PCI)) {
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
 			/* PCI-X init */
 			if (CONFIG_SYS_CLK_FREQ < 66000000)
 				printf("PCI-X will only work at 66 MHz\n");

board/freescale/mpc8555cds/mpc8555cds.c

@@ -308,7 +308,7 @@ local_bus_init(void)
 	 */
 
 	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {

board/freescale/mpc8560ads/mpc8560ads.c

@@ -337,7 +337,7 @@ local_bus_init(void)
 	 */
 
 	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {

board/freescale/mpc8568mds/mpc8568mds.c

@@ -99,11 +99,6 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
 };
 
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 void local_bus_init(void);
 void sdram_init(void);
 
@@ -170,13 +165,6 @@ initdram(int board_type)
 	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
 	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
 	/*
 	 * SDRAM Initialization
 	 */
@@ -200,7 +188,7 @@ local_bus_init(void)
 	sys_info_t sysinfo;
 
 	get_sys_info(&sysinfo);
-	clkdiv = (lbc->lcrr & 0x0f) * 2;
+	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	gur->lbiuiplldcr1 = 0x00078080;

board/freescale/mpc8572ds/mpc8572ds.c

@@ -38,10 +38,6 @@
 #include "../common/pixis.h"
 #include "../common/sgmii_riser.h"
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 long int fixed_sdram(void);
 
 int checkboard (void)
@@ -61,20 +57,12 @@ phys_size_t initdram(int board_type)
 
 #ifdef CONFIG_SPD_EEPROM
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
 #else
 	dram_size = fixed_sdram();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	puts("    DDR: ");
 	return dram_size;
 }
@@ -178,11 +166,11 @@ void pci_init_board(void)
 		struct pci_controller *hose = &pcie3_hose;
 		int pcie_ep = (host_agent == 0) || (host_agent == 3) ||
 			(host_agent == 5) || (host_agent == 6);
-		int pcie_configured  = io_sel >= 1;
+		int pcie_configured  = (io_sel == 0x7);
 		struct pci_region *r = hose->regions;
 		u32 temp32;
 
-		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
 			printf ("\n    PCIE3 connected to ULI as %s (base address %x)",
 					pcie_ep ? "End Point" : "Root Complex",
 					(uint)pci);
@@ -246,10 +234,10 @@ void pci_init_board(void)
 		struct pci_controller *hose = &pcie2_hose;
 		int pcie_ep = (host_agent == 2) || (host_agent == 4) ||
 			(host_agent == 6) || (host_agent == 0);
-		int pcie_configured  = io_sel & 4;
+		int pcie_configured  = (io_sel == 0x3) || (io_sel == 0x7);
 		struct pci_region *r = hose->regions;
 
-		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
 			printf ("\n    PCIE2 connected to Slot 1 as %s (base address %x)",
 					pcie_ep ? "End Point" : "Root Complex",
 					(uint)pci);
@@ -299,7 +287,9 @@ void pci_init_board(void)
 		struct pci_controller *hose = &pcie1_hose;
 		int pcie_ep = (host_agent <= 1) || (host_agent == 4) ||
 			(host_agent == 5);
-		int pcie_configured  = io_sel & 6;
+		int pcie_configured  = (io_sel == 0x2) || (io_sel == 0x3) ||
+					(io_sel == 0x7) || (io_sel == 0xb) ||
+					(io_sel == 0xc) || (io_sel == 0xf);
 		struct pci_region *r = hose->regions;
 
 		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){

board/freescale/mpc8572ds/tlb.c

@@ -41,10 +41,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
-	SET_TLB_ENTRY(0, PIXIS_BASE, PIXIS_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
 	/* TLB 1 */
 	/* *I*** - Covers boot page */
 	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
@@ -86,6 +82,9 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_1M, 1),
 
+	SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 8, BOOKE_PAGESZ_4K, 1),
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);

board/freescale/mpc8610hpcd/law.c

@@ -31,8 +31,8 @@ struct law_entry law_table[] = {
 #if !defined(CONFIG_SPD_EEPROM)
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1),
 #endif
-	SET_LAW(CONFIG_SYS_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CONFIG_SYS_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
 	SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
 	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2),

board/freescale/mpc8610hpcd/mpc8610hpcd.c

@@ -266,14 +266,14 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			 CONFIG_SYS_PCIE1_MEM_BASE,
+			 CONFIG_SYS_PCIE1_MEM_BUS,
 			 CONFIG_SYS_PCIE1_MEM_PHYS,
 			 CONFIG_SYS_PCIE1_MEM_SIZE,
 			 PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			 CONFIG_SYS_PCIE1_IO_BASE,
+			 CONFIG_SYS_PCIE1_IO_BUS,
 			 CONFIG_SYS_PCIE1_IO_PHYS,
 			 CONFIG_SYS_PCIE1_IO_SIZE,
 			 PCI_REGION_IO);
@@ -321,14 +321,14 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			 CONFIG_SYS_PCIE2_MEM_BASE,
+			 CONFIG_SYS_PCIE2_MEM_BUS,
 			 CONFIG_SYS_PCIE2_MEM_PHYS,
 			 CONFIG_SYS_PCIE2_MEM_SIZE,
 			 PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			 CONFIG_SYS_PCIE2_IO_BASE,
+			 CONFIG_SYS_PCIE2_IO_BUS,
 			 CONFIG_SYS_PCIE2_IO_PHYS,
 			 CONFIG_SYS_PCIE2_IO_SIZE,
 			 PCI_REGION_IO);
@@ -370,14 +370,14 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			 CONFIG_SYS_PCI1_MEM_BASE,
+			 CONFIG_SYS_PCI1_MEM_BUS,
 			 CONFIG_SYS_PCI1_MEM_PHYS,
 			 CONFIG_SYS_PCI1_MEM_SIZE,
 			 PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			 CONFIG_SYS_PCI1_IO_BASE,
+			 CONFIG_SYS_PCI1_IO_BUS,
 			 CONFIG_SYS_PCI1_IO_PHYS,
 			 CONFIG_SYS_PCI1_IO_SIZE,
 			 PCI_REGION_IO);

board/keymile/common/keymile_hdlc_enet.c

@@ -0,0 +1,620 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * Based in part on cpu/mpc8260/ether_scc.c.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+
+#ifdef CONFIG_KEYMILE_HDLC_ENET
+#ifdef TEST_IT
+#include <command.h>
+#endif
+
+#include "keymile_hdlc_enet.h"
+
+extern char keymile_slot;	/* our slot number in the backplane */
+
+/* Allow up to about 50 ms for sending */
+#define TOUT_LOOP	50000
+
+/*
+ * Since, except during initialization, ethact is always HDLC ETHERNET
+ * while we're in the driver, just use serial_printf() everywhere for
+ * output.  This avoids possible conflicts when netconsole is being
+ * used.
+ */
+#define dprintf(fmt, args...)	serial_printf(fmt, ##args)
+
+/* Cannot use the storage from net.c because we allocate larger buffers */
+static volatile uchar MyPktBuf[HDLC_PKTBUFSRX * PKT_MAXBLR_SIZE + PKTALIGN];
+static volatile uchar *MyRxPackets[HDLC_PKTBUFSRX]; /* Receive packet */
+
+static unsigned int keymile_rxIdx;	/* index of the current RX buffer */
+
+static IPaddr_t cachedNumbers[CACHEDNUMBERS]; /* 4 bytes per entry */
+void initCachedNumbers(int);
+
+/*
+  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+  *  immr->udata_bd address on Dual-Port RAM
+  * Provide for Double Buffering
+  */
+typedef volatile struct CommonBufferDescriptor {
+    cbd_t txbd;			/* Tx BD */
+    cbd_t rxbd[HDLC_PKTBUFSRX];	/* Rx BD */
+} RTXBD;
+
+/*
+ * This must be extern because it is allocated in DPRAM using CPM-sepcific
+ * code.
+ */
+static RTXBD *rtx;
+
+static int keymile_hdlc_enet_send(struct eth_device *, volatile void *, int);
+static int keymile_hdlc_enet_recv(struct eth_device *);
+void keymile_hdlc_enet_init_bds(RTXBD *);
+extern int keymile_hdlc_enet_init(struct eth_device *, bd_t *);
+extern void keymile_hdlc_enet_halt(struct eth_device *);
+
+/* flags in the buffer descriptor not defined anywhere else */
+#define BD_SC_CT	BD_SC_CD
+#define BD_SC_CR	0x04
+#define BD_SC_DE	0x80
+#ifndef BD_SC_TC
+#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
+#endif
+#define BD_SC_FIRST	BD_SC_TC
+#define BD_SC_STATS (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_CR | BD_SC_CD \
+		| BD_SC_OV | BD_SC_DE)
+
+#if defined(TEST_RX) || defined(TEST_TX) || defined(TEST_IT)
+static void hexdump(unsigned char *buf, int len)
+{
+	int i;
+	const int bytesPerLine = 32;
+
+	if (len > 4 * bytesPerLine)
+		len = 4 * bytesPerLine;
+	dprintf("\t address: %08x\n", (unsigned int)buf);
+	for (i = 0; i < len; i++) {
+		if (i % bytesPerLine == 0)
+			dprintf("%04x: ", (unsigned short)i);
+		dprintf("%02x ", buf[i]);
+		if ((i + 1) % bytesPerLine == 0) {
+			dprintf("\n");
+			continue;
+		}
+		if ((i + 1) % 8 == 0)
+			printf(" ");
+	}
+	if (len % bytesPerLine)
+		dprintf("\n");
+}
+#endif
+
+int keymile_hdlc_enet_initialize(bd_t *bis)
+{
+	struct eth_device *dev;
+
+	dev = (struct eth_device *) malloc(sizeof *dev);
+	memset(dev, 0, sizeof *dev);
+#ifdef TEST_IT
+	seth = dev;
+#endif
+
+	sprintf(dev->name, "HDLC ETHERNET");
+	dev->init   = keymile_hdlc_enet_init;
+	dev->halt   = keymile_hdlc_enet_halt;
+	dev->send   = keymile_hdlc_enet_send;
+	dev->recv   = keymile_hdlc_enet_recv;
+
+	eth_register(dev);
+
+	return 1;
+}
+
+/*
+ * This is called from the board-specific driver after rtx is allocated.
+ */
+void keymile_hdlc_enet_init_bds(RTXBD *board_rtx)
+{
+	volatile cbd_t *bdp;
+	int i;
+
+	rtx = board_rtx;
+	keymile_rxIdx = 0;
+	/*
+	 * Initialize the buffer descriptors.
+	 */
+	bdp = &rtx->txbd;
+	bdp->cbd_sc = 0;
+	bdp->cbd_bufaddr = 0;
+	bdp->cbd_sc = BD_SC_WRAP;
+
+	/*
+	 *	Setup RX packet buffers, aligned correctly.
+	 *	Borrowed from net/net.c.
+	 */
+	MyRxPackets[0] = &MyPktBuf[0] + (PKTALIGN - 1);
+	MyRxPackets[0] -= (ulong)MyRxPackets[0] % PKTALIGN;
+	for (i = 1; i < HDLC_PKTBUFSRX; i++)
+		MyRxPackets[i] = MyRxPackets[0] + i * PKT_MAXBLR_SIZE;
+
+	bdp = &rtx->rxbd[0];
+	for (i = 0; i < HDLC_PKTBUFSRX; i++) {
+		bdp->cbd_sc = BD_SC_EMPTY;
+		/* Leave space at the start for INET header. */
+		bdp->cbd_bufaddr = (unsigned int)(MyRxPackets[i] +
+			INET_HDR_ALIGN);
+		bdp++;
+	}
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+}
+
+/*
+ * This returns the current port number for NETCONSOLE.  If nc_port
+ * in netconsole.c weren't declared static we wouldn't need this.
+ */
+static short get_netcons_port(void)
+{
+	char *p;
+	short nc_port;
+
+	nc_port = 6666; /* default */
+
+	p = getenv("ncip");
+	if (p != NULL) {
+		p = strchr(p, ':');
+		if (p != NULL)
+			nc_port = simple_strtoul(p + 1, NULL, 10);
+	}
+
+	return htons(nc_port);
+}
+
+/*
+ * Read the port numbers from the variables
+ */
+void initCachedNumbers(int verbose)
+{
+	char *str;
+	ushort port;
+
+	/* already in network order */
+	cachedNumbers[IP_ADDR] = getenv_IPaddr("ipaddr");
+	/* already in network order */
+	cachedNumbers[IP_SERVER] = getenv_IPaddr("serverip");
+	str = getenv("tftpsrcp");
+	if (str != NULL) {
+		/* avoid doing htons() again and again */
+		port = htons((ushort)simple_strtol(str, NULL, 10));
+		cachedNumbers[TFTP_SRC_PORT] = port;
+	} else
+		/* this can never be a valid port number */
+		cachedNumbers[TFTP_SRC_PORT] = (ulong)-1;
+	str = getenv("tftpdstp");
+	if (str != NULL) {
+		/* avoid doing htons() again and again */
+		port = htons((ushort)simple_strtol(str, NULL, 10));
+		cachedNumbers[TFTP_DST_PORT] = port;
+	} else
+		/* this is the default value */
+		cachedNumbers[TFTP_DST_PORT] = htons(WELL_KNOWN_PORT);
+	/* already in network order */
+	cachedNumbers[NETCONS_PORT] = get_netcons_port();
+	if (verbose) {
+		dprintf("\nIP Number Initialization:\n");
+		dprintf(" ip address          %08lx\n", cachedNumbers[IP_ADDR]);
+		dprintf(" server ip address   %08lx\n",
+			cachedNumbers[IP_SERVER]);
+		dprintf(" tftp client port    %ld\n",
+			cachedNumbers[TFTP_SRC_PORT]);
+		dprintf(" tftp server port    %ld\n",
+			cachedNumbers[TFTP_DST_PORT]);
+		dprintf(" netcons port        %ld\n",
+			cachedNumbers[NETCONS_PORT]);
+		dprintf(" slot number (hex)   %02x\n", keymile_slot);
+	}
+}
+
+static void keymile_hdlc_enet_doarp(volatile void *packet, int len)
+{
+	ARP_t *arp;
+	IPaddr_t src_ip; /* U-Boot's IP */
+	IPaddr_t dest_ip; /* the mgcoge's IP */
+	unsigned char *packet_copy = malloc(len);
+
+	/*
+	 * Handling an ARP request means that a new transfer has started.
+	 * Update our cached parameters now.
+	 */
+	initCachedNumbers(0); /* may reinit port numbers */
+
+	/* special handling required for ARP */
+	arp = (ARP_t *)(packet + ETHER_HDR_SIZE);
+	/*
+	 *	XXXX
+	 * This is pretty dirty!  NetReceive only uses
+	 * a few fields when handling an ARP reply, so
+	 * we only modify those here.  This could
+	 * result in catastrophic failure at a later
+	 * time if the handler is modified!
+	 */
+	arp->ar_op = htons(ARPOP_REPLY);
+	/* save his/our IP */
+	src_ip = NetReadIP(&arp->ar_data[6]);
+	dest_ip = NetReadIP(&arp->ar_data[16]);
+	/* copy target IP to source IP */
+	NetCopyIP(&arp->ar_data[6], &dest_ip);
+	/* copy our IP to the right place */
+	NetCopyIP(&arp->ar_data[16], &src_ip);
+	/* always use 0x7f as the MAC for the coge */
+	arp->ar_data[0] = HDLC_UACUA;
+	/*
+	 * copy the packet
+	 * if NetReceive wants to write to stdout, it may overwrite packet
+	 * especially if stdout is set to nc!
+	 *
+	 * However, if the malloc() above fails then we can still try the
+	 * original packet, rather than causing the transfer to fail.
+	 */
+	if (packet_copy != NULL) {
+		memcpy(packet_copy, (char *)packet, len);
+		NetReceive(packet_copy, len);
+		free(packet_copy);
+	} else
+		NetReceive(packet, len);
+}
+
+/*
+ * NOTE all callers ignore the returned value!
+ * At the moment this only handles ARP Requests, TFTP and NETCONSOLE.
+ */
+static int keymile_hdlc_enet_send(struct eth_device *dev, volatile void *packet,
+	int len)
+{
+	int j;
+	uint data_addr;
+	int data_len;
+	struct icn_hdr header;
+	struct icn_frame *frame;
+	Ethernet_t *et;
+	ARP_t *arp;
+	IP_t *ip;
+
+	if (len > (MAX_FRAME_LENGTH - sizeof(header)))
+		return -1;
+
+	frame = NULL;
+	et = NULL;
+	arp = NULL;
+	ip = NULL;
+
+	j = 0;
+	while ((rtx->txbd.cbd_sc & BD_SC_READY) && (j < TOUT_LOOP)) {
+		/* will also trigger Wd if needed, but maybe too often  */
+		udelay(1);
+		j++;
+	}
+	if (j >= TOUT_LOOP) {
+		dprintf("TX not ready sc %x\n", rtx->txbd.cbd_sc);
+		return -1;
+	}
+
+	/*
+	 * First check for an ARP Request since this requires special handling.
+	 */
+	if (len >= (ARP_HDR_SIZE + ETHER_HDR_SIZE)) {
+		et = (Ethernet_t *)packet;
+		arp = (ARP_t *)(((char *)et) + ETHER_HDR_SIZE);
+		/* ARP and REQUEST? */
+		if (et->et_protlen == PROT_ARP &&
+			arp->ar_op == htons(ARPOP_REQUEST)) {
+			/* just short-circuit the request on the U-Boot side */
+			keymile_hdlc_enet_doarp(packet, len);
+			return 0;
+		}
+	}
+
+	/*
+	 * GJ - I suppose the assumption here that len will always be
+	 * > INET_HDR_SIZE is alright as long as the network stack
+	 * isn't changed.
+	 * Do not send INET header.
+	 */
+	data_len = len + sizeof(header) - INET_HDR_SIZE;
+	frame = (struct icn_frame *) (((char *)packet) + INET_HDR_SIZE -
+		sizeof(header));
+
+#ifdef TEST_TX
+	printf("frame: %08x, ", frame);
+	hexdump((unsigned char *)packet, data_len + INET_HDR_SIZE);
+#endif
+
+	data_addr = (uint)frame;
+	if (len >= (IP_HDR_SIZE + ETHER_HDR_SIZE))
+		ip = (IP_t *)(packet + ETHER_HDR_SIZE);
+	/* Is it TFTP? TFTP always uses UDP and the cached dport */
+	if (ip != NULL && ip->ip_p == IPPROTO_UDP && ip->udp_dst ==
+			(ushort)cachedNumbers[TFTP_DST_PORT]) {
+		/* just in case the port wasn't set in the environment */
+		if (cachedNumbers[TFTP_SRC_PORT] == (ulong)-1)
+			cachedNumbers[TFTP_SRC_PORT] = ip->udp_src;
+		frame->hdr.application = MGS_TFTP;
+	}
+	/*
+	 * Is it NETCONSOLE?  NETCONSOLE always uses UDP.
+	 */
+	else if (ip != NULL && ip->ip_p == IPPROTO_UDP
+		&& ip->udp_dst == (ushort)cachedNumbers[NETCONS_PORT]) {
+			frame->hdr.application = MGS_NETCONS;
+	} else {
+		/* reject unknown packets */
+		/* may do some check on frame->hdr.application */
+		dprintf("Unknown packet type in %s, rejected\n",
+			__func__);
+		return -1;
+	}
+	/*
+	 * Could extract the target's slot ID from its MAC here,
+	 * but u-boot only wants to talk to the active server.
+	 *
+	 * avoid setting new source address when moving to another slot
+	 */
+	frame->hdr.src_addr = keymile_slot;
+	frame->hdr.dest_addr = HDLC_UACUA;
+#ifdef TEST_TX
+	{
+		dprintf("TX: ");
+		hexdump((unsigned char *)data_addr, data_len);
+	}
+#endif
+
+	flush_cache(data_addr, data_len);
+	rtx->txbd.cbd_bufaddr = data_addr;
+	rtx->txbd.cbd_datlen = data_len;
+	rtx->txbd.cbd_sc |= (BD_SC_READY | BD_SC_TC | BD_SC_LAST | BD_SC_WRAP);
+
+	while ((rtx->txbd.cbd_sc & BD_SC_READY) && (j < TOUT_LOOP)) {
+		/* will also trigger Wd if needed, but maybe too often  */
+		udelay(1);
+		j++;
+	}
+	if (j >= TOUT_LOOP)
+		dprintf("TX timeout\n");
+#ifdef ET_DEBUG
+	dprintf("cycles: %d    status: %x\n", j, rtx->txbd.cbd_sc);
+#endif
+	j = (rtx->txbd.cbd_sc & BD_SC_STATS); /* return only status bits */
+	return j;
+}
+
+/*
+ * During a receive, the RxIdx points to the current incoming buffer.
+ * When we update through the ring, if the next incoming buffer has
+ * not been given to the system, we just set the empty indicator,
+ * effectively tossing the packet.
+ */
+static int keymile_hdlc_enet_recv(struct eth_device *dev)
+{
+	int length;
+	unsigned char app;
+	struct icn_frame *fp;
+	Ethernet_t *ep;
+	IP_t *ip;
+
+	for (;;) {
+		if (rtx->rxbd[keymile_rxIdx].cbd_sc & BD_SC_EMPTY) {
+			length = -1;
+			break;	/* nothing received - leave for() loop */
+		}
+
+		length = rtx->rxbd[keymile_rxIdx].cbd_datlen;
+#ifdef TEST_RX
+		dprintf("packet %d bytes long\n", length);
+#endif
+
+		/*
+		 * BD_SC_BR -> LG bit
+		 * BD_SC_FR -> NO bit
+		 * BD_SC_PR -> AB bit
+		 * BD_SC_NAK -> CR bit
+		 * 0x80 -> DE bit
+		 */
+		if (rtx->rxbd[keymile_rxIdx].cbd_sc & BD_SC_STATS) {
+#ifdef ET_DEBUG
+			dprintf("err: %x\n", rtx->rxbd[keymile_rxIdx].cbd_sc);
+#endif
+		} else if (length > MAX_FRAME_LENGTH) { /* can't happen */
+#ifdef ET_DEBUG
+			dprintf("err: packet too big\n");
+#endif
+		} else {
+			fp = (struct icn_frame *)(MyRxPackets[keymile_rxIdx] +
+				INET_HDR_ALIGN - INET_HDR_SIZE);
+#ifdef TEST_RX
+			dprintf("RX %d: ", keymile_rxIdx);
+			hexdump((unsigned char *)MyRxPackets[keymile_rxIdx],
+				INET_HDR_ALIGN + INET_HDR_SIZE + 4);
+#endif
+			/* copy icn header to the beginning */
+			memcpy(fp, ((char *)fp + INET_HDR_SIZE),
+				sizeof(struct icn_hdr));
+			app = fp->hdr.application;
+			if (app == MGS_NETCONS || app == MGS_TFTP) {
+				struct icn_hdr *ih = &fp->hdr;
+				unsigned char icn_src_addr = ih->src_addr;
+				unsigned char icn_dest_addr = ih->dest_addr;
+
+				/*
+				 * expand header by INET_HDR_SIZE
+				 */
+				length += INET_HDR_SIZE;
+				/* initalize header */
+				memset((char *)fp->data, 0x00, INET_HDR_SIZE);
+				ep = (Ethernet_t *)fp->data;
+				/* set MACs */
+				ep->et_dest[0] = icn_dest_addr;
+				ep->et_src[0] = icn_src_addr;
+				ep->et_protlen = htons(PROT_IP);
+				/* set ip stuff */
+				ip = (IP_t *)(fp->data + ETHER_HDR_SIZE);
+				/* set ip addresses */
+				ip->ip_src = cachedNumbers[IP_SERVER];
+				ip->ip_dst = cachedNumbers[IP_ADDR];
+				/* ip length */
+				ip->ip_len = htons(length - ETHER_HDR_SIZE -
+					REMOVE);
+				/* ip proto */
+				ip->ip_p = IPPROTO_UDP;
+				switch (app) {
+				case MGS_TFTP:
+					/* swap src/dst port numbers */
+					ip->udp_src = (ushort)
+						cachedNumbers[TFTP_DST_PORT];
+					ip->udp_dst = (ushort)
+						cachedNumbers[TFTP_SRC_PORT];
+					ip->udp_len = ip->ip_len -
+						IP_HDR_SIZE_NO_UDP;
+					ip->udp_xsum = 0;
+					break;
+				case MGS_NETCONS:
+					ip->udp_src = (ushort)
+						cachedNumbers[NETCONS_PORT];
+					/*
+					 * in drivers/net/netconsole.c src port
+					 * equals dest port
+					 */
+					ip->udp_dst = ip->udp_src;
+					ip->udp_len = ip->ip_len -
+						IP_HDR_SIZE_NO_UDP;
+					ip->udp_xsum = 0;
+					break;
+				}
+				/* ip version */
+				ip->ip_hl_v = (0x40) | (0x0f &
+					(IP_HDR_SIZE_NO_UDP / 4));
+				ip->ip_tos = 0;
+				ip->ip_id = 0;
+				/* flags, fragment offset */
+				ip->ip_off = htons(0x4000);
+				ip->ip_ttl = 255; /* time to live */
+				/* have to fixup the checksum */
+				ip->ip_sum = ~NetCksum((uchar *)ip,
+					IP_HDR_SIZE_NO_UDP / 2);
+				/*
+				 * Pass the packet up to the protocol layers
+				 * but remove dest_addr, src_addr, application
+				 * and the CRC.
+				 */
+#ifdef TEST_RX
+				hexdump((unsigned char *)fp->data,
+					INET_HDR_SIZE + 4);
+#endif
+				NetReceive(fp->data, length - REMOVE);
+			} else {
+				/*
+				 * the other application types are not yet
+				 * supported by u-boot.
+				 */
+				/* normally drop it */
+#ifdef TEST_NO
+				/* send it anyway */
+				fp = (struct icn_frame *)
+					(MyRxPackets[keymile_rxIdx] +
+						INET_HDR_ALIGN);
+				NetReceive(fp->data, length - REMOVE);
+#endif
+			}
+		}
+
+		/* Give the buffer back to the SCC. */
+		rtx->rxbd[keymile_rxIdx].cbd_datlen = 0;
+
+		/* wrap around buffer index when necessary */
+		if ((keymile_rxIdx + 1) >= HDLC_PKTBUFSRX) {
+			rtx->rxbd[HDLC_PKTBUFSRX - 1].cbd_sc =
+				(BD_SC_WRAP | BD_SC_EMPTY);
+			keymile_rxIdx = 0;
+		} else {
+			rtx->rxbd[keymile_rxIdx].cbd_sc = BD_SC_EMPTY;
+			keymile_rxIdx++;
+		}
+	}
+	return length;
+}
+
+#ifdef TEST_IT
+/* simple send test routine */
+int hdlc_enet_stest(struct cmd_tbl_s *a, int b, int c, char **d)
+{
+	unsigned char pkt[2];
+	int ret;
+
+	dprintf("enter stest\n");
+	/* may have to initialize things */
+	if (seth->state != ETH_STATE_ACTIVE) {
+		/* the bd_t* is not used */
+		if (seth->init(seth, NULL) >= 0)
+			seth->state = ETH_STATE_ACTIVE;
+	}
+	pkt[0] = 0xea;
+	pkt[1] = 0xae;
+	ret = keymile_hdlc_enet_send(seth, pkt, 2);
+	dprintf("return from send %x\n", ret);
+	dprintf("exit stest\n");
+	return ret;
+}
+U_BOOT_CMD(
+	stest, 1, 1, hdlc_enet_stest,
+	"stest	- simple send test for hdlc_enet\n",
+	"no arguments\n"
+);
+/* simple receive test routine */
+int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d)
+{
+	int ret;
+
+	dprintf("enter rtest\n");
+	/* may have to initialize things */
+	if (seth->state != ETH_STATE_ACTIVE) {
+		/* the bd_t* is not used */
+		if (seth->init(seth, NULL) >= 0)
+			seth->state = ETH_STATE_ACTIVE;
+	}
+	ret = keymile_hdlc_enet_recv(seth);
+	dprintf("return from recv %x\n", ret);
+	dprintf("exit rtest\n");
+	return ret;
+}
+U_BOOT_CMD(
+	rtest, 1, 1, hdlc_enet_rtest,
+	"rtest	- simple receive test for hdlc_enet\n",
+	"no arguments\n"
+);
+#endif
+
+#endif /* CONFIG_KEYMILE_HDLC_ENET */

board/keymile/common/keymile_hdlc_enet.h

@@ -0,0 +1,129 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _KEYMILE_HDLC_ENET_H_
+#define _KEYMILE_HDLC_ENET_H_
+
+/* Unfortuantely, we have do this to get the flag defines in the cbd_t */
+#ifdef CONFIG_MGSUVD
+#include <commproc.h>
+#endif
+#ifdef CONFIG_MGCOGE
+#include <mpc8260.h>
+#include <asm/cpm_8260.h>
+#endif
+
+/*
+ * Defines for the ICN protocol used for communication over HDLC
+ * on the backplane between MGSUVDs and MGCOGEs.
+ */
+
+/*
+ * MAC which is reserved for communication (0x00 - 0xff in the last byte,
+ * which is the slot number)
+ */
+
+/*
+ * A DLL frame looks like this:
+ *  8 bit  |  8 bit     |  8 bit |  8 bit     | n * 8 bit| 16 bit|  8 bit
+ *  opening| destination| source | application|  data    |  FCS  | closing
+ *   flag  |  address   | address|            |          |       |  flag
+ *  (HW)      (APP)       (APP)      (APP)       (APP)      (HW)   (HW)
+ */
+
+/*
+ * The opening flag, the FCS and the closing flag are set by the hardware so
+ * they are not reflected in this struct.
+ */
+struct icn_hdr {
+	unsigned char dest_addr;
+	unsigned char src_addr;
+	unsigned char application;
+} __attribute__((packed));
+
+#define ICNHDR_LEN	(sizeof(struct icn_hdr))
+#define CRC_LEN		(sizeof(short))
+/* bytes to remove from packet before sending it upstream */
+#define REMOVE		(ICNHDR_LEN + CRC_LEN)
+
+struct icn_frame {
+	struct icn_hdr hdr;
+	unsigned char data[0];	/* a place holder */
+} __attribute__((packed));
+
+/* Address field */
+#define HDLC_UUA	0x00 /* Unicast Unit Address */
+#define HDLC_UUA_MASK	0x3f /* the last 6 bits contain the slot number */
+#define SET_HDLC_UUA(x) ((HDLC_UUA | ((x) & HDLC_UUA_MASK)))
+#define HDLC_UACUA	0x7f /* Unicast Active Control Unit Address */
+#define HDLC_BCAST	0xff /* broadcast */
+
+/* Application field */
+#define MGS_UUSP	0x00
+#define MGS_UREP	0x01
+#define MGS_IUP		0x02
+#define MGS_UTA		0x03
+#define MGS_MDS		0x04
+#define MGS_ITIME	0x05
+/* added by DENX */
+#define MGS_NETCONS	0x06	/* netconsole */
+#define MGS_TFTP	0x07
+
+/* Useful defines for buffer sizes, etc. */
+#define HDLC_PKTBUFSRX		32
+#define MAX_FRAME_LENGTH	1500 /* ethernet frame size */
+			 /*   14        +    28     */
+#define INET_HDR_SIZE	(ETHER_HDR_SIZE + IP_HDR_SIZE)
+#define INET_HDR_ALIGN	(((INET_HDR_SIZE + PKTALIGN - 1) / PKTALIGN) * PKTALIGN)
+/* INET_HDR_SIZE is stripped off */
+#define PKT_MAXBLR_SIZE	(MAX_FRAME_LENGTH + INET_HDR_ALIGN)
+
+/*
+ * It is too slow to read always the port numbers and IP addresses from the
+ * string variables.
+ * cachedNumbers is meant to cache it.
+ * THIS IS ONLY A SPEED IMPROVEMENT!
+ */
+enum {
+	IP_ADDR = 0,	/* getenv_IPaddr("serverip"); */
+	IP_SERVER,	/* getenv_IPaddr("ipaddr"); */
+	TFTP_SRC_PORT,	/* simple_strtol(getenv("tftpsrcp"), NULL, 10); */
+	TFTP_DST_PORT,	/* simple_strtol(getenv("tftpdstp"), NULL, 10); */
+	NETCONS_PORT,	/* simple_strtol(getenv("ncip"), NULL, 10); */
+	CACHEDNUMBERS
+};
+
+#define WELL_KNOWN_PORT 69	/* Well known TFTP port # */
+
+/* define this to create a test commend (htest) */
+#undef TEST_IT
+#ifdef TEST_IT
+/* have to save a copy of the eth_device for the test command's use */
+struct eth_device *seth;
+#endif
+/* define this for outputting of received packets */
+#undef TEST_RX
+/* define this for outputting of packets being sent */
+#undef TEST_TX
+
+#endif /* _KEYMILE_HDLC_ENET_H_ */

board/keymile/mgcoge/Makefile

@@ -28,7 +28,8 @@ endif
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o ../common/common.o
+COBJS	:= $(BOARD).o ../common/common.o ../common/keymile_hdlc_enet.o \
+		mgcoge_hdlc_enet.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/keymile/mgcoge/mgcoge_hdlc_enet.c

@@ -0,0 +1,276 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * Based in part on cpu/mpc8260/ether_scc.c.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+
+#ifdef CONFIG_KEYMILE_HDLC_ENET
+
+#include "../common/keymile_hdlc_enet.h"
+
+char keymile_slot;	/* our slot number in the backplane */
+
+/*
+ * Since, except during initialization, ethact is always HDLC ETHERNET
+ * while we're in the driver, just use serial_printf() everywhere for
+ * output.  This avoids possible conflicts when netconsole is being
+ * used.
+ */
+#define dprintf(fmt, args...)	serial_printf(fmt, ##args)
+
+static int already_inited;
+
+/*
+  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+  *  immr->udata_bd address on Dual-Port RAM
+  * Provide for Double Buffering
+  */
+typedef volatile struct CommonBufferDescriptor {
+    cbd_t txbd;			/* Tx BD */
+    cbd_t rxbd[HDLC_PKTBUFSRX];	/* Rx BD */
+} RTXBD;
+
+static RTXBD *rtx;
+
+int keymile_hdlc_enet_init(struct eth_device *, bd_t *);
+void keymile_hdlc_enet_halt(struct eth_device *);
+extern void keymile_hdlc_enet_init_bds(RTXBD *);
+extern void initCachedNumbers(int);
+
+/* Use SCC1 */
+#define CPM_CR_SCC_PAGE		CPM_CR_SCC1_PAGE
+#define CPM_CR_SCC_SBLOCK	CPM_CR_SCC1_SBLOCK
+#define CMXSCR_MASK		(CMXSCR_GR1|CMXSCR_SC1|\
+					CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
+#define CMXSCR_VALUE		(CMXSCR_RS1CS_CLK11|CMXSCR_TS1CS_CLK11)
+#define MGC_PROFF_HDLC	PROFF_SCC1
+#define MGC_SCC_HDLC	0	/* Index, not number! */
+
+int keymile_hdlc_enet_init(struct eth_device *dev, bd_t *bis)
+{
+	/* int i; */
+	uint dpr;
+	/* volatile cbd_t *bdp; */
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	volatile cpm8260_t *cp = &(im->im_cpm);
+	volatile scc_t *sccp;
+	volatile scc_hdlc_t *hpr;
+	volatile iop8260_t *iop;
+
+	if (already_inited)
+		return 0;
+
+	hpr = (scc_hdlc_t *)(&im->im_dprambase[MGC_PROFF_HDLC]);
+	sccp = (scc_t *)(&im->im_scc[MGC_SCC_HDLC]);
+	iop = &im->im_ioport;
+
+	/*
+	 * Disable receive and transmit just in case.
+	 */
+	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	/*
+	 * Avoid exhausting DPRAM, which would cause a panic.
+	 */
+	if (rtx == NULL) {
+		/* dpr is an offset into dpram */
+		dpr = m8260_cpm_dpalloc(sizeof(RTXBD), 8);
+		rtx = (RTXBD *)&im->im_dprambase[dpr];
+	}
+
+	/* We need the slot number for addressing. */
+	keymile_slot = *(char *)(CONFIG_SYS_SLOT_ID_BASE +
+		CONFIG_SYS_SLOT_ID_OFF) & CONFIG_SYS_SLOT_ID_MASK;
+	/*
+	 * Be consistent with the Linux driver and set
+	 * only enetaddr[0].
+	 *
+	 * Always add 1 to the slot number so that
+	 * there are no problems with an ethaddr which
+	 * is all 0s.  This should be acceptable because
+	 * a board should never have a slot number of 255,
+	 * which is the broadcast address.  The HDLC addressing
+	 * uses only the slot number.
+	 */
+	dev->enetaddr[0] = keymile_slot + 1;
+#ifdef TEST_IT
+	dprintf("slot %d\n", keymile_slot);
+#endif
+
+	/* use pd30, pd31 pins for TXD1, RXD1 respectively */
+	iop->iop_ppard |= (0x80000000 >> 30) | (0x80000000 >> 31);
+	iop->iop_pdird |= (0x80000000 >> 30);
+	iop->iop_psord |= (0x80000000 >> 30);
+
+	/* use pc21 as CLK11 */
+	iop->iop_pparc |= (0x80000000 >> 21);
+	iop->iop_pdirc &= ~(0x80000000 >> 21);
+	iop->iop_psorc &= ~(0x80000000 >> 21);
+
+	/* use pc15 as CTS1 */
+	iop->iop_pparc |= (0x80000000 >> 15);
+	iop->iop_pdirc &= ~(0x80000000 >> 15);
+	iop->iop_psorc &= ~(0x80000000 >> 15);
+
+	/*
+	 * SI clock routing
+	 * use CLK11
+	 * this also connects SCC1 to NMSI
+	 */
+	im->im_cpmux.cmx_scr = (im->im_cpmux.cmx_scr & ~CMXSCR_MASK) |
+		CMXSCR_VALUE;
+
+	/* keymile_rxIdx = 0; */
+
+	/*
+	 * Initialize function code registers for big-endian.
+	 */
+	hpr->sh_genscc.scc_rfcr = CPMFCR_EB;
+	hpr->sh_genscc.scc_tfcr = CPMFCR_EB;
+
+	/*
+	 * Set maximum bytes per receive buffer.
+	 */
+	hpr->sh_genscc.scc_mrblr = MAX_FRAME_LENGTH;
+
+	/* Setup CRC generator values for HDLC */
+	hpr->sh_cmask = 0x0000F0B8;
+	hpr->sh_cpres = 0x0000FFFF;
+
+	/* Initialize all error counters to 0 */
+	hpr->sh_disfc = 0;
+	hpr->sh_crcec = 0;
+	hpr->sh_abtsc = 0;
+	hpr->sh_nmarc = 0;
+	hpr->sh_retrc = 0;
+
+	/* Set maximum frame length size */
+	hpr->sh_mflr = MAX_FRAME_LENGTH;
+
+	/* set to 1 for per frame processing change later if needed */
+	hpr->sh_rfthr = 1;
+
+	hpr->sh_hmask = 0xff;
+
+	hpr->sh_haddr2 = SET_HDLC_UUA(keymile_slot);
+	hpr->sh_haddr3 = hpr->sh_haddr2;
+	hpr->sh_haddr4 = hpr->sh_haddr2;
+	/* broadcast */
+	hpr->sh_haddr1 = HDLC_BCAST;
+
+	hpr->sh_genscc.scc_rbase = (unsigned int) &rtx->rxbd[0];
+	hpr->sh_genscc.scc_tbase = (unsigned int) &rtx->txbd;
+
+#if 0
+	/*
+	 * Initialize the buffer descriptors.
+	 */
+	bdp = &rtx->txbd;
+	bdp->cbd_sc = 0;
+	bdp->cbd_bufaddr = 0;
+	bdp->cbd_sc = BD_SC_WRAP;
+
+	/*
+	 *	Setup RX packet buffers, aligned correctly.
+	 *	Borrowed from net/net.c.
+	 */
+	MyRxPackets[0] = &MyPktBuf[0] + (PKTALIGN - 1);
+	MyRxPackets[0] -= (ulong)MyRxPackets[0] % PKTALIGN;
+	for (i = 1; i < HDLC_PKTBUFSRX; i++)
+		MyRxPackets[i] = MyRxPackets[0] + i * PKT_MAXBLR_SIZE;
+
+	bdp = &rtx->rxbd[0];
+	for (i = 0; i < HDLC_PKTBUFSRX; i++) {
+		bdp->cbd_sc = BD_SC_EMPTY;
+		/* Leave space at the start for INET header. */
+		bdp->cbd_bufaddr = (unsigned int)(MyRxPackets[i] +
+			INET_HDR_ALIGN);
+		bdp++;
+	}
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+#else
+	keymile_hdlc_enet_init_bds(rtx);
+#endif
+
+	/* Let's re-initialize the channel now.	 We have to do it later
+	 * than the manual describes because we have just now finished
+	 * the BD initialization.
+	 */
+	cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
+					0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+	while (cp->cp_cpcr & CPM_CR_FLG);
+
+	sccp->scc_gsmrl = SCC_GSMRL_MODE_HDLC;
+	/* CTSS=1 */
+	sccp->scc_gsmrh = SCC_GSMRH_CTSS;
+	/* NOF=0, RTE=1, DRT=0, BUS=1 */
+	sccp->scc_psmr = ((0x8000 >> 6) | (0x8000 >> 10));
+
+/* loopback for local testing */
+#ifdef GJTEST
+	dprintf("LOOPBACK!\n");
+	sccp->scc_gsmrl |= SCC_GSMRL_DIAG_LOOP;
+#endif
+
+	/*
+	 * Disable all interrupts and clear all pending
+	 * events.
+	 */
+	sccp->scc_sccm = 0;
+	sccp->scc_scce = 0xffff;
+
+	/*
+	 * And last, enable the transmit and receive processing.
+	 */
+	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	dprintf("%s: HDLC ENET Version 0.3 on SCC%d\n", dev->name,
+		MGC_SCC_HDLC + 1);
+
+	/*
+	 * We may not get an ARP packet because ARP was already done on
+	 * a different interface, so initialize the cached values now.
+	 */
+	initCachedNumbers(1);
+
+	already_inited = 1;
+
+	return 0;
+}
+
+void keymile_hdlc_enet_halt(struct eth_device *dev)
+{
+#if 0 /* just return, but keep this for reference */
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+	/* maybe should do a graceful stop here? */
+	immr->im_scc[MGC_SCC_HDLC].scc_gsmrl &=
+		~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+}
+
+#endif /* CONFIG_MGCOGE_HDLC_ENET */

board/keymile/mgsuvd/Makefile

@@ -28,7 +28,8 @@ endif
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o ../common/common.o
+COBJS	= $(BOARD).o ../common/common.o ../common/keymile_hdlc_enet.o \
+		mgsuvd_hdlc_enet.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/keymile/mgsuvd/mgsuvd_hdlc_enet.c

@@ -0,0 +1,278 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * Based in part on cpu/mpc8xx/scc.c.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>	/* commproc.h is included here */
+#include <malloc.h>
+#include <net.h>
+
+#ifdef CONFIG_KEYMILE_HDLC_ENET
+
+#include "../common/keymile_hdlc_enet.h"
+
+char keymile_slot;	/* our slot number in the backplane */
+
+/*
+ * Since, except during initialization, ethact is always HDLC ETHERNET
+ * while we're in the driver, just use serial_printf() everywhere for
+ * output.  This avoids possible conflicts when netconsole is being
+ * used.
+ */
+#define dprintf(fmt, args...)	serial_printf(fmt, ##args)
+
+static int already_inited;
+
+/*
+  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+  *  immr->udata_bd address on Dual-Port RAM
+  * Provide for Double Buffering
+  */
+typedef volatile struct CommonBufferDescriptor {
+    cbd_t txbd;			/* Tx BD */
+    cbd_t rxbd[HDLC_PKTBUFSRX];	/* Rx BD */
+} RTXBD;
+
+static RTXBD *rtx;
+
+int keymile_hdlc_enet_init(struct eth_device *, bd_t *);
+void keymile_hdlc_enet_halt(struct eth_device *);
+extern void keymile_hdlc_enet_init_bds(RTXBD *);
+extern void initCachedNumbers(int);
+
+/* Use SCC4 */
+#define MGS_CPM_CR_HDLC	CPM_CR_CH_SCC4
+#define MGS_PROFF_HDLC	PROFF_SCC4
+#define MGS_SCC_HDLC	3	/* Index, not number! */
+
+int keymile_hdlc_enet_init(struct eth_device *dev, bd_t *bis)
+{
+	/* int i; */
+	/* volatile cbd_t *bdp; */
+	volatile cpm8xx_t *cp;
+	volatile scc_t *sccp;
+	volatile hdlc_pram_t *hpr;
+	volatile iop8xx_t *iop;
+
+	if (already_inited)
+		return 0;
+
+	cp = (cpm8xx_t *)&(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm);
+	hpr = (hdlc_pram_t *)(&cp->cp_dparam[MGS_PROFF_HDLC]);
+	sccp = (volatile scc_t *)(&cp->cp_scc[MGS_SCC_HDLC]);
+	iop = (iop8xx_t *)&(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport);
+
+	/*
+	 * Disable receive and transmit just in case.
+	 */
+	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+#ifndef CONFIG_SYS_ALLOC_DPRAM
+#error "CONFIG_SYS_ALLOC_DPRAM must be defined"
+#else
+	/*
+	 * Avoid exhausting DPRAM, which would cause a panic.
+	 * Actually this isn't really necessary, but leave it here
+	 * for safety's sake.
+	 */
+	if (rtx == NULL) {
+		rtx = (RTXBD *) (cp->cp_dpmem +
+			 dpram_alloc_align(sizeof(RTXBD), 8));
+		if (rtx == (RTXBD *)CPM_DP_NOSPACE)
+			return -1;
+		memset((void *)rtx, 0, sizeof(RTXBD));
+	}
+#endif /* !CONFIG_SYS_ALLOC_DPRAM */
+
+	/* We need the slot number for addressing. */
+	keymile_slot = *(char *)(CONFIG_SYS_SLOT_ID_BASE +
+		CONFIG_SYS_SLOT_ID_OFF) & CONFIG_SYS_SLOT_ID_MASK;
+	/*
+	 * Be consistent with the Linux driver and set
+	 * only enetaddr[0].
+	 *
+	 * Always add 1 to the slot number so that
+	 * there are no problems with an ethaddr which
+	 * is all 0s.  This should be acceptable because
+	 * a board should never have a slot number of 255,
+	 * which is the broadcast address.  The HDLC addressing
+	 * uses only the slot number.
+	 */
+	dev->enetaddr[0] = keymile_slot + 1;
+
+#ifdef TEST_IT
+	dprintf("slot %d\n", keymile_slot);
+#endif
+
+	/* use pa8, pa9 pins for TXD4, RXD4 respectively */
+	iop->iop_papar |= ((0x8000 >> 8) | (0x8000 >> 9));
+	iop->iop_padir &= ~((0x8000 >> 8) | (0x8000 >> 9));
+	iop->iop_paodr &= ~((0x8000 >> 8) | (0x8000 >> 9));
+
+	/* also use pa0 as CLK8 */
+	iop->iop_papar |= 0x8000;
+	iop->iop_padir &= ~0x8000;
+	iop->iop_paodr &= ~0x8000;
+
+	/* use pc5 as CTS4 */
+	iop->iop_pcpar &= ~(0x8000 >> 5);
+	iop->iop_pcdir &= ~(0x8000 >> 5);
+	iop->iop_pcso  |= (0x8000 >> 5);
+
+	/*
+	 * SI clock routing
+	 * use CLK8
+	 * this also connects SCC4 to NMSI
+	 */
+	cp->cp_sicr = (cp->cp_sicr & ~0xff000000) | 0x3f000000;
+
+	/* keymile_rxIdx = 0; */
+
+	/*
+	 * Initialize function code registers for big-endian.
+	 */
+	hpr->rfcr = SCC_EB;
+	hpr->tfcr = SCC_EB;
+
+	/*
+	 * Set maximum bytes per receive buffer.
+	 */
+	hpr->mrblr = MAX_FRAME_LENGTH;
+
+	/* Setup CRC generator values for HDLC */
+	hpr->c_mask = 0x0000F0B8;
+	hpr->c_pres = 0x0000FFFF;
+
+	/* Initialize all error counters to 0 */
+	hpr->disfc = 0;
+	hpr->crcec = 0;
+	hpr->abtsc = 0;
+	hpr->nmarc = 0;
+	hpr->retrc = 0;
+
+	/* Set maximum frame length size */
+	hpr->mflr = MAX_FRAME_LENGTH;
+
+	/* set to 1 for per frame processing change later if needed */
+	hpr->rfthr = 1;
+
+	hpr->hmask = 0xff;
+
+	hpr->haddr2 = SET_HDLC_UUA(keymile_slot);
+	hpr->haddr3 = hpr->haddr2;
+	hpr->haddr4 = hpr->haddr2;
+	/* broadcast */
+	hpr->haddr1 = HDLC_BCAST;
+
+	hpr->rbase = (unsigned int) &rtx->rxbd[0];
+	hpr->tbase = (unsigned int) &rtx->txbd;
+
+#if 0
+	/*
+	 * Initialize the buffer descriptors.
+	 */
+	bdp = &rtx->txbd;
+	bdp->cbd_sc = 0;
+	bdp->cbd_bufaddr = 0;
+	bdp->cbd_sc = BD_SC_WRAP;
+
+	/*
+	 *	Setup RX packet buffers, aligned correctly.
+	 *	Borrowed from net/net.c.
+	 */
+	MyRxPackets[0] = &MyPktBuf[0] + (PKTALIGN - 1);
+	MyRxPackets[0] -= (ulong)MyRxPackets[0] % PKTALIGN;
+	for (i = 1; i < HDLC_PKTBUFSRX; i++)
+		MyRxPackets[i] = MyRxPackets[0] + i * PKT_MAXBLR_SIZE;
+
+	bdp = &rtx->rxbd[0];
+	for (i = 0; i < HDLC_PKTBUFSRX; i++) {
+		bdp->cbd_sc = BD_SC_EMPTY;
+		/* Leave space at the start for INET header. */
+		bdp->cbd_bufaddr = (unsigned int)(MyRxPackets[i] +
+			INET_HDR_ALIGN);
+		bdp++;
+	}
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+#else
+	keymile_hdlc_enet_init_bds(rtx);
+#endif
+
+	/* Let's re-initialize the channel now.	 We have to do it later
+	 * than the manual describes because we have just now finished
+	 * the BD initialization.
+	 */
+	cp->cp_cpcr = mk_cr_cmd(MGS_CPM_CR_HDLC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+	while (cp->cp_cpcr & CPM_CR_FLG);
+
+	sccp->scc_gsmrl = SCC_GSMRL_MODE_HDLC;
+	/* CTSS=1 */
+	sccp->scc_gsmrh = SCC_GSMRH_CTSS;
+	/* NOF=0, RTE=1, DRT=0, BUS=1 */
+	sccp->scc_psmr = ((0x8000 >> 6) | (0x8000 >> 10));
+
+/* loopback for local testing */
+#ifdef GJTEST
+	dprintf("LOOPBACK!\n");
+	sccp->scc_gsmrl |= SCC_GSMRL_DIAG_LOOP;
+#endif
+
+	/*
+	 * Disable all interrupts and clear all pending
+	 * events.
+	 */
+	sccp->scc_sccm = 0;
+	sccp->scc_scce = 0xffff;
+
+	/*
+	 * And last, enable the transmit and receive processing.
+	 */
+	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	dprintf("%s: HDLC ENET Version 0.3 on SCC%d\n", dev->name,
+		MGS_SCC_HDLC + 1);
+
+	/*
+	 * We may not get an ARP packet because ARP was already done on
+	 * a different interface, so initialize the cached values now.
+	 */
+	initCachedNumbers(1);
+
+	already_inited = 1;
+
+	return 0;
+}
+
+void keymile_hdlc_enet_halt(struct eth_device *dev)
+{
+#if 0 /* just return, but keep this for reference */
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+	/* maybe should do a graceful stop here? */
+	immr->im_cpm.cp_scc[MGS_SCC_HDLC].scc_gsmrl &=
+		~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+}
+
+#endif /* CONFIG_KEYMILE_HDLC_ENET */

board/lwmon/lwmon.c

@@ -762,19 +762,18 @@ static uchar *key_match (uchar *kbd_data)
 #ifdef CONFIG_LCD_INFO
 #include <lcd.h>
 #include <version.h>
+#include <timestamp.h>
 
 void lcd_show_board_info(void)
 {
 	char temp[32];
 
-	lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, __DATE__, __TIME__);
+	lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
 	lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
 	lcd_printf ("    Wolfgang DENK, wd@denx.de\n");
 #ifdef CONFIG_LCD_INFO_BELOW_LOGO
 	lcd_printf ("MPC823 CPU at %s MHz\n",
 		strmhz(temp, gd->cpu_clk));
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
-					info, strlen(info));
 	lcd_printf ("  %ld MB RAM, %ld MB Flash\n",
 		gd->ram_size >> 20,
 		gd->bd->bi_flashsize >> 20 );

board/m501sk/Makefile

@@ -27,8 +27,6 @@ LIB	= $(obj)lib$(BOARD).a
 
 COBJS  := m501sk.o eeprom.o
 
-SOBJS  := memsetup.o
-
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))

board/m501sk/memsetup.S

@@ -1,200 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- *	          Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * Modified for the at91rm9200dk board by
- * (C) Copyright 2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#ifdef CONFIG_BOOTBINFUNC
-/*
- * some parameters for the board
- *
- * This is based on rm9200dk.cfg for the BDI2000 from ABATRON which in
- * turn is based on the boot.bin code from ATMEL
- *
- */
-
-/* flash */
-#define MC_PUIA 0xFFFFFF10
-#define MC_PUIA_VAL 0x00000000
-#define MC_PUP 0xFFFFFF50
-#define MC_PUP_VAL 0x00000000
-#define MC_PUER 0xFFFFFF54
-#define MC_PUER_VAL 0x00000000
-#define MC_ASR 0xFFFFFF04
-#define MC_ASR_VAL 0x00000000
-#define MC_AASR 0xFFFFFF08
-#define MC_AASR_VAL 0x00000000
-#define EBI_CFGR 0xFFFFFF64
-#define EBI_CFGR_VAL 0x00000000
-#define SMC_CSR0 0xFFFFFF70
-#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define PLLAR 0xFFFFFC28
-#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
-#define PLLBR 0xFFFFFC2C
-#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define MCKR 0xFFFFFC30
-/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-#define MCKR_VAL	0x00000202
-
-/* sdram */
-#define PIOC_ASR 0xFFFFF870
-#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as Perip (D16/D31) */
-#define PIOC_BSR 0xFFFFF874
-#define PIOC_BSR_VAL 0x00000000
-#define PIOC_PDR 0xFFFFF804
-#define PIOC_PDR_VAL 0xFFFF0000
-#define EBI_CSA 0xFFFFFF60
-#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
-#define SDRC_CR 0xFFFFFF98
-#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */
-#define SDRAM 0x20000000 /* address of the SDRAM */
-#define SDRAM1 0x20000080 /* address of the SDRAM */
-#define SDRAM_VAL 0x00000000 /* value written to SDRAM */
-#define SDRC_MR 0xFFFFFF90
-#define SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1 0x00000004 /* refresh */
-#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define SDRC_TR 0xFFFFFF94
-#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-
-_TEXT_BASE:
-	.word   TEXT_BASE
-
-.globl lowlevelinit
-lowlevelinit:
-	/* memory control configuration */
-	/* this isn't very elegant, but  what the heck */
-	ldr     r0, =SMRDATA
-	ldr     r1, _TEXT_BASE
-	sub     r0, r0, r1
-	add     r2, r0, #80
-0:
-	/* the address */
-	ldr     r1, [r0], #4
-	/* the value */
-	ldr     r3, [r0], #4
-	str     r3, [r1]
-	cmp     r2, r0
-	bne     0b
-	/* delay - this is all done by guess */
-	ldr     r0, =0x00010000
-1:
-	subs    r0, r0, #1
-	bhi     1b
-	ldr     r0, =SMRDATA1
-	ldr     r1, _TEXT_BASE
-	sub     r0, r0, r1
-	add     r2, r0, #176
-2:
-	/* the address */
-	ldr     r1, [r0], #4
-	/* the value */
-	ldr     r3, [r0], #4
-	str     r3, [r1]
-	cmp     r2, r0
-	bne     2b
-
-	/* everything is fine now */
-	mov     pc, lr
-
-	.ltorg
-
-SMRDATA:
-	.word MC_PUIA
-	.word MC_PUIA_VAL
-	.word MC_PUP
-	.word MC_PUP_VAL
-	.word MC_PUER
-	.word MC_PUER_VAL
-	.word MC_ASR
-	.word MC_ASR_VAL
-	.word MC_AASR
-	.word MC_AASR_VAL
-	.word EBI_CFGR
-	.word EBI_CFGR_VAL
-	.word SMC_CSR0
-	.word SMC_CSR0_VAL
-	.word PLLAR
-	.word PLLAR_VAL
-	.word PLLBR
-	.word PLLBR_VAL
-	.word MCKR
-	.word MCKR_VAL
-	/* SMRDATA is 80 bytes long */
-	/* here there's a delay of 100 */
-SMRDATA1:
-	.word PIOC_ASR
-	.word PIOC_ASR_VAL
-	.word PIOC_BSR
-	.word PIOC_BSR_VAL
-	.word PIOC_PDR
-	.word PIOC_PDR_VAL
-	.word EBI_CSA
-	.word EBI_CSA_VAL
-	.word SDRC_CR
-	.word SDRC_CR_VAL
-	.word SDRC_MR
-	.word SDRC_MR_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRC_MR
-	.word SDRC_MR_VAL1
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRC_MR
-	.word SDRC_MR_VAL2
-	.word SDRAM1
-	.word SDRAM_VAL
-	.word SDRC_TR
-	.word SDRC_TR_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRC_MR
-	.word SDRC_MR_VAL3
-	.word SDRAM
-	.word SDRAM_VAL
-	/* SMRDATA1 is 176 bytes long */
-#endif /* CONFIG_BOOTBINFUNC */

board/ml2/u-boot.lds

@@ -63,7 +63,6 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)

board/mousse/mousse.c

@@ -30,6 +30,7 @@
 #include <mpc824x.h>
 #include <netdev.h>
 #include <asm/processor.h>
+#include <timestamp.h>
 
 #include "mousse.h"
 #include "m48t59y.h"
@@ -42,7 +43,7 @@ int checkboard (void)
 	char buf[32];
 
 	puts ("Board: MOUSSE MPC8240/KAHLUA - CHRP (MAP B)\n");
-	printf ("Built: %s at %s\n", __DATE__, __TIME__);
+	printf ("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
 	printf ("MPLD:  Revision %d\n", SYS_REVID_GET ());
 	printf ("Local Bus:  %s MHz\n", strmhz (buf, busfreq));
 

board/mpc8540eval/mpc8540eval.c

@@ -101,7 +101,7 @@ phys_size_t initdram (int board_type)
 #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
 	get_sys_info(&sysinfo);
 	/* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
-	if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
+	if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV) < 66000000) {
 		lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
 	} else {
 		lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff;

board/mpr2/lowlevel_init.S

@@ -22,6 +22,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
+#include <asm/macro.h>
 
 	.global	lowlevel_init
 
@@ -33,59 +34,35 @@ lowlevel_init:
 /*
  * Set frequency multipliers and dividers in FRQCR.
  */
-	mov.l	WTCSR_A,r1
-	mov.l	WTCSR_D,r0
-	mov.w	r0,@r1
+	write16	WTCSR_A, WTCSR_D
 
-	mov.l	WTCNT_A,r1
-	mov.l	WTCNT_D,r0
-	mov.w	r0,@r1
+	write16	WTCNT_A, WTCNT_D
 
-	mov.l	FRQCR_A,r1
-	mov.l	FRQCR_D,r0
-	mov.w	r0,@r1
+	write16	FRQCR_A, FRQCR_D
 
 /*
  * Setup CS0 (Flash).
  */
-	mov.l	CS0BCR_A, r1
-	mov.l	CS0BCR_D, r0
-	mov.l	r0, @r1
+	write32	CS0BCR_A, CS0BCR_D
 
-	mov.l	CS0WCR_A, r1
-	mov.l	CS0WCR_D, r0
-	mov.l	r0, @r1
+	write32	CS0WCR_A, CS0WCR_D
 
 /*
  * Setup CS3 (SDRAM).
  */
-	mov.l	CS3BCR_A, r1
-	mov.l	CS3BCR_D, r0
-	mov.l	r0, @r1
+	write32	CS3BCR_A, CS3BCR_D
 
-	mov.l	CS3WCR_A, r1
-	mov.l	CS3WCR_D, r0
-	mov.l	r0, @r1
+	write32	CS3WCR_A, CS3WCR_D
 
-	mov.l	SDCR_A, r1
-	mov.l	SDCR_D1, r0
-	mov.l	r0, @r1
+	write32	SDCR_A, SDCR_D1
 
-	mov.l	RTCSR_A, r1
-	mov.l	RTCSR_D, r0
-	mov.l	r0, @r1
+	write32	RTCSR_A, RTCSR_D
 
-	mov.l	RTCNT_A, r1
-	mov.l	RTCNT_D, r0
-	mov.l	r0, @r1
+	write32	RTCNT_A, RTCNT_D
 
-	mov.l	RTCOR_A, r1
-	mov.l	RTCOR_D, r0
-	mov.l	r0, @r1
+	write32	RTCOR_A, RTCOR_D
 
-	mov.l	SDCR_A, r1
-	mov.l	SDCR_D2, r0
-	mov.l	r0, @r1
+	write32	SDCR_A, SDCR_D2
 
 	mov.l	SDMR3_A, r1
 	mov.l	SDMR3_D, r0
@@ -112,21 +89,27 @@ WTCSR_D:	.long	0xA507		/* divide by 4096 */
 /*
  * Spansion S29GL256N11 @ 48 MHz
  */
-CS0BCR_D:	.long	0x12490400  /* 1 idle cycle inserted, normal space, 16 bit */
-CS0WCR_D:	.long	0x00000340  /* tSW=0.5ck, 6 wait cycles, NO external wait, tHW=0.5ck */
+/* 1 idle cycle inserted, normal space, 16 bit */
+CS0BCR_D:	.long	0x12490400
+/* tSW=0.5ck, 6 wait cycles, NO external wait, tHW=0.5ck */
+CS0WCR_D:	.long	0x00000340
 
 /*
  * Samsung K4S511632B-UL75 @ 48 MHz
  * Micron MT48LC32M16A2-75 @ 48 MHz
  */
-CS3BCR_D:	.long	0x10004400  /* CS3BCR = 0x10004400, minimum idle cycles, SDRAM, 16 bit */
-CS3WCR_D:	.long	0x00000091  /* tRP=1ck, tRCD=1ck, CL=2, tRWL=2ck, tRC=4ck */
-SDCR_D1:	.long	0x00000012  /* no refresh, 13 rows, 10 cols, NO bank active mode */
-SDCR_D2:	.long	0x00000812  /* refresh */
-RTCSR_D:	.long	0xA55A0008  /* 1/4, once */
-RTCNT_D:	.long	0xA55A005D  /* count 93 */
-RTCOR_D:	.long	0xa55a005d  /* count 93 */
-SDMR3_D:	.long	0x440       /* mode register CL2, burst read and SINGLE WRITE */
+/* CS3BCR = 0x10004400, minimum idle cycles, SDRAM, 16 bit */
+CS3BCR_D:	.long	0x10004400
+/* tRP=1ck, tRCD=1ck, CL=2, tRWL=2ck, tRC=4ck */
+CS3WCR_D:	.long	0x00000091
+/* no refresh, 13 rows, 10 cols, NO bank active mode */
+SDCR_D1:	.long	0x00000012
+SDCR_D2:	.long	0x00000812	/* refresh */
+RTCSR_D:	.long	0xA55A0008	/* 1/4, once */
+RTCNT_D:	.long	0xA55A005D	/* count 93 */
+RTCOR_D:	.long	0xa55a005d	/* count 93 */
+/* mode register CL2, burst read and SINGLE WRITE */
+SDMR3_D:	.long	0x440
 
 /*
  * Registers

board/ms7722se/lowlevel_init.S

@@ -27,13 +27,14 @@
 #include <version.h>
 
 #include <asm/processor.h>
+#include <asm/macro.h>
 
 /*
- *  Board specific low level init code, called _very_ early in the
- *  startup sequence. Relocation to SDRAM has not happened yet, no
- *  stack is available, bss section has not been initialised, etc.
+ * Board specific low level init code, called _very_ early in the
+ * startup sequence. Relocation to SDRAM has not happened yet, no
+ * stack is available, bss section has not been initialised, etc.
  *
- *  (Note: As no stack is available, no subroutines can be called...).
+ * (Note: As no stack is available, no subroutines can be called...).
  */
 
 	.global	lowlevel_init
@@ -43,167 +44,96 @@
 
 lowlevel_init:
 
-	/* Address of Cache Control Register */
-	mov.l	CCR_A, r1
-	/*Instruction Cache Invalidate */
-	mov.l	CCR_D, r0
-	mov.l	r0, @r1
+	/*
+	 * Cache Control Register
+	 * Instruction Cache Invalidate
+	 */
+	write32	CCR_A, CCR_D
 
-	/* Address of MMU Control Register */
-	mov.l	MMUCR_A, r1
-	/* TI == TLB Invalidate bit */
-	mov.l	MMUCR_D, r0
-	mov.l	r0, @r1
+	/*
+	 * Address of MMU Control Register
+	 * TI == TLB Invalidate bit
+	 */
+	write32	MMUCR_A, MMUCR_D
 
 	/* Address of Power Control Register 0 */
-	mov.l	MSTPCR0_A, r1
-	mov.l	MSTPCR0_D, r0
-	mov.l	r0, @r1
+	write32	MSTPCR0_A, MSTPCR0_D
 
 	/* Address of Power Control Register 2 */
-	mov.l	MSTPCR2_A, r1
-	mov.l	MSTPCR2_D, r0
-	mov.l	r0, @r1
+	write32	MSTPCR2_A, MSTPCR2_D
 
-	mov.l	SBSCR_A, r1
-	mov.w	SBSCR_D, r0
-	mov.w	r0, @r1
+	write16	SBSCR_A, SBSCR_D
 
-	mov.l	PSCR_A, r1
-	mov.w	PSCR_D, r0
-	mov.w	r0, @r1
+	write16	PSCR_A, PSCR_D
 
 	/* 0xA4520004 (Watchdog Control / Status Register) */
-!	mov.l	RWTCSR_A, r1
-	/* 0xA507 -> timer_STOP/WDT_CLK=max */
-!	mov.w	RWTCSR_D_1, r0
-!	mov.w	r0, @r1
+!	write16	RWTCSR_A, RWTCSR_D_1	/* 0xA507 -> timer_STOP/WDT_CLK=max */
 
 	/* 0xA4520000 (Watchdog Count Register) */
-	mov.l	RWTCNT_A, r1
-	/*0x5A00 -> Clear */
-	mov.w	RWTCNT_D, r0
-	mov.w	r0, @r1
+	write16	RWTCNT_A, RWTCNT_D	/*0x5A00 -> Clear */
 
 	/* 0xA4520004 (Watchdog Control / Status Register) */
-	mov.l	RWTCSR_A, r1
-	/* 0xA504 -> timer_STOP/CLK=500ms */
-	mov.w	RWTCSR_D_2, r0
-	mov.w	r0, @r1
+	write16	RWTCSR_A, RWTCSR_D_2	/* 0xA504 -> timer_STOP/CLK=500ms */
 
 	/* 0xA4150000 Frequency control register */
-	mov.l	FRQCR_A, r1
-	mov.l	FRQCR_D, r0	!
-	mov.l	r0, @r1
+	write32	FRQCR_A, FRQCR_D
 
-	mov.l	CCR_A, r1
-	mov.l	CCR_D_2, r0
-	mov.l	r0, @r1
+	write32	CCR_A, CCR_D_2
 
 bsc_init:
 
-	mov.l	PSELA_A, r1
-	mov.w	PSELA_D, r0
-	mov.w	r0, @r1
+	write16	PSELA_A, PSELA_D
 
-	mov.l	DRVCR_A, r1
-	mov.w	DRVCR_D, r0
-	mov.w	r0, @r1
+	write16	DRVCR_A, DRVCR_D
 
-	mov.l	PCCR_A, r1
-	mov.w	PCCR_D, r0
-	mov.w	r0, @r1
+	write16	PCCR_A, PCCR_D
 
-	mov.l	PECR_A, r1
-	mov.w	PECR_D, r0
-	mov.w	r0, @r1
+	write16	PECR_A, PECR_D
 
-	mov.l	PJCR_A, r1
-	mov.w	PJCR_D, r0
-	mov.w	r0, @r1
+	write16	PJCR_A, PJCR_D
 
-	mov.l	PXCR_A, r1
-	mov.w	PXCR_D, r0
-	mov.w	r0, @r1
+	write16	PXCR_A, PXCR_D
 
-	mov.l	CMNCR_A, r1	! CMNCR address -> R1
-	mov.l	CMNCR_D, r0	! CMNCR data    -> R0
-	mov.l	r0, @r1		! CMNCR set
+	write32	CMNCR_A, CMNCR_D
 
-	mov.l	CS0BCR_A, r1	! CS0BCR address -> R1
-	mov.l	CS0BCR_D, r0	! CS0BCR data    -> R0
-	mov.l	r0, @r1		! CS0BCR set
+	write32	CS0BCR_A, CS0BCR_D
 
-	mov.l	CS2BCR_A, r1	! CS2BCR address -> R1
-	mov.l	CS2BCR_D, r0	! CS2BCR data    -> R0
-	mov.l	r0, @r1		! CS2BCR set
+	write32	CS2BCR_A, CS2BCR_D
 
-	mov.l	CS4BCR_A, r1	! CS4BCR address -> R1
-	mov.l	CS4BCR_D, r0	! CS4BCR data    -> R0
-	mov.l	r0, @r1		! CS4BCR set
+	write32	CS4BCR_A, CS4BCR_D
 
-	mov.l	CS5ABCR_A, r1	! CS5ABCR address -> R1
-	mov.l	CS5ABCR_D, r0	! CS5ABCR data    -> R0
-	mov.l	r0, @r1		! CS5ABCR set
+	write32	CS5ABCR_A, CS5ABCR_D
 
-	mov.l	CS5BBCR_A, r1	! CS5BBCR address -> R1
-	mov.l	CS5BBCR_D, r0	! CS5BBCR data    -> R0
-	mov.l	r0, @r1		! CS5BBCR set
+	write32	CS5BBCR_A, CS5BBCR_D
 
-	mov.l	CS6ABCR_A, r1	! CS6ABCR address -> R1
-	mov.l	CS6ABCR_D, r0	! CS6ABCR data    -> R0
-	mov.l	r0, @r1		! CS6ABCR set
+	write32	CS6ABCR_A, CS6ABCR_D
 
-	mov.l	CS0WCR_A, r1	! CS0WCR address -> R1
-	mov.l	CS0WCR_D, r0	! CS0WCR data    -> R0
-	mov.l	r0, @r1		! CS0WCR set
+	write32	CS0WCR_A, CS0WCR_D
 
-	mov.l	CS2WCR_A, r1	! CS2WCR address -> R1
-	mov.l	CS2WCR_D, r0	! CS2WCR data    -> R0
-	mov.l	r0, @r1		! CS2WCR set
+	write32	CS2WCR_A, CS2WCR_D
 
-	mov.l	CS4WCR_A, r1	! CS4WCR address -> R1
-	mov.l	CS4WCR_D, r0	! CS4WCR data    -> R0
-	mov.l	r0, @r1		! CS4WCR set
+	write32	CS4WCR_A, CS4WCR_D
 
-	mov.l	CS5AWCR_A, r1	! CS5AWCR address -> R1
-	mov.l	CS5AWCR_D, r0	! CS5AWCR data    -> R0
-	mov.l	r0, @r1		! CS5AWCR set
+	write32	CS5AWCR_A, CS5AWCR_D
 
-	mov.l	CS5BWCR_A, r1	! CS5BWCR address -> R1
-	mov.l	CS5BWCR_D, r0	! CS5BWCR data    -> R0
-	mov.l	r0, @r1		! CS5BWCR set
+	write32	CS5BWCR_A, CS5BWCR_D
 
-	mov.l	CS6AWCR_A, r1	! CS6AWCR address -> R1
-	mov.l	CS6AWCR_D, r0	! CS6AWCR data    -> R0
-	mov.l	r0, @r1		! CS6AWCR set
+	write32	CS6AWCR_A, CS6AWCR_D
 
 	! SDRAM initialization
-	mov.l	SDCR_A, r1	! SB_SDCR address -> R1
-	mov.l	SDCR_D, r0	! SB_SDCR data    -> R0
-	mov.l	r0, @r1		! SB_SDCR set
+	write32	SDCR_A, SDCR_D
 
-	mov.l	SDWCR_A, r1	! SB_SDWCR address -> R1
-	mov.l	SDWCR_D, r0	! SB_SDWCR data    -> R0
-	mov.l	r0, @r1		! SB_SDWCR set
+	write32	SDWCR_A, SDWCR_D
 
-	mov.l	SDPCR_A, r1	! SB_SDPCR address -> R1
-	mov.l	SDPCR_D, r0	! SB_SDPCR data    -> R0
-	mov.l	r0, @r1		! SB_SDPCR set
+	write32	SDPCR_A, SDPCR_D
 
-	mov.l	RTCOR_A, r1	! SB_RTCOR address -> R1
-	mov.l	RTCOR_D, r0	! SB_RTCOR data    -> R0
-	mov.l	r0, @r1		! SB_RTCOR set
+	write32	RTCOR_A, RTCOR_D
 
-	mov.l	RTCSR_A, r1	! SB_RTCSR address -> R1
-	mov.l	RTCSR_D, r0	! SB_RTCSR data    -> R0
-	mov.l	r0, @r1		! SB_RTCSR set
+	write32	RTCSR_A, RTCSR_D
 
-	mov.l	SDMR3_A, r1	! SDMR3 address -> R1
-	mov	#0x00, r0	! SDMR3 data    -> R0
-	mov.b	r0, @r1		! SDMR3 set
+	write8	SDMR3_A, SDMR3_D
 
-	! BL bit off (init = ON)  (?!?)
+	! BL bit off (init = ON) (?!?)
 
 	stc	sr, r0				! BL bit off(init=ON)
 	mov.l	SR_MASK_D, r1
@@ -232,28 +162,28 @@ MSTPCR0_D:	.long	0x00001001
 MSTPCR2_D:	.long	0xffffffff
 FRQCR_D:	.long	0x07022538
 
-PSELA_A:	.long   0xa405014E
-PSELA_D:	.word   0x0A10
+PSELA_A:	.long	0xa405014E
+PSELA_D:	.word	0x0A10
 	.align 2
 
-DRVCR_A:	.long   0xa405018A
-DRVCR_D:	.word   0x0554
+DRVCR_A:	.long	0xa405018A
+DRVCR_D:	.word	0x0554
 	.align 2
 
-PCCR_A:		.long   0xa4050104
-PCCR_D:		.word   0x8800
+PCCR_A:		.long	0xa4050104
+PCCR_D:		.word	0x8800
 	.align 2
 
-PECR_A:		.long   0xa4050108
-PECR_D:		.word   0x0000
+PECR_A:		.long	0xa4050108
+PECR_D:		.word	0x0000
 	.align 2
 
-PJCR_A:		.long   0xa4050110
-PJCR_D:		.word   0x1000
+PJCR_A:		.long	0xa4050110
+PJCR_D:		.word	0x1000
 	.align 2
 
-PXCR_A:		.long   0xa4050148
-PXCR_D:		.word   0x0AAA
+PXCR_A:		.long	0xa4050148
+PXCR_D:		.word	0x0AAA
 	.align 2
 
 CMNCR_A:	.long	CMNCR
@@ -295,6 +225,7 @@ RTCOR_D:	.long	0xA55A0034
 RTCSR_A:	.long	SBSC_RTCSR
 RTCSR_D:	.long	0xA55A0010
 SDMR3_A:	.long	0xFE500180
+SDMR3_D:	.long	0x0
 
 	.align	1
 

board/ms7750se/lowlevel_init.S

@@ -29,120 +29,94 @@
 #include <version.h>
 
 #include <asm/processor.h>
+#include <asm/macro.h>
 
 #ifdef CONFIG_CPU_SH7751
-#define BCR2_D_VALUE	0x2FFC	   /* Area 1-6 width: 32/32/32/32/32/16 */
-#define WCR1_D_VALUE    0x02770771 /* DMA:0 A6:2 A3:0 A0:1 Others:15 */
+#define BCR2_D_VALUE	0x2FFC		/* Area 1-6 width: 32/32/32/32/32/16 */
+#define WCR1_D_VALUE	0x02770771	/* DMA:0 A6:2 A3:0 A0:1 Others:15 */
 #ifdef CONFIG_MARUBUN_PCCARD
-#define WCR2_D_VALUE    0xFFFE4FE7 /* A6:15 A6B:7 A5:15 A5B:7 A4:15
-				      A3:2  A2:15 A1:15 A0:6  A0B:7  */
+#define WCR2_D_VALUE	0xFFFE4FE7	/* A6:15 A6B:7 A5:15 A5B:7 A4:15
+					   A3:2  A2:15 A1:15 A0:6  A0B:7  */
 #else /* CONFIG_MARUBUN_PCCARD */
-#define WCR2_D_VALUE    0x7FFE4FE7 /* A6:3  A6B:7 A5:15 A5B:7 A4:15
-				      A3:2  A2:15 A1:15 A0:6  A0B:7  */
+#define WCR2_D_VALUE	0x7FFE4FE7	/* A6:3  A6B:7 A5:15 A5B:7 A4:15
+					   A3:2  A2:15 A1:15 A0:6  A0B:7  */
 #endif /* CONFIG_MARUBUN_PCCARD */
-#define WCR3_D_VALUE	0x01777771 /* A6: 0-1 A5: 1-3 A4: 1-3 A3: 1-3
-				      A2: 1-3 A1: 1-3 A0: 0-1 */
-#define RTCOR_D_VALUE	0xA50D	   /* Write code A5, data 0D (~15us?) */
-#define SDMR3_ADDRESS	0xFF940088 /* SDMR3 address on 32-bit bus */
-#define MCR_D1_VALUE	0x100901B4 /* SDRAM 32-bit, CAS/RAS Refresh, ... */
-#define MCR_D2_VALUE	0x500901B4 /* Same w/MRSET now 1 (mode reg cmd) */
+#define WCR3_D_VALUE	0x01777771	/* A6: 0-1 A5: 1-3 A4: 1-3 A3: 1-3
+					   A2: 1-3 A1: 1-3 A0: 0-1 */
+#define RTCOR_D_VALUE	0xA50D		/* Write code A5, data 0D (~15us?) */
+#define SDMR3_ADDRESS	0xFF940088	/* SDMR3 address on 32-bit bus */
+#define MCR_D1_VALUE	0x100901B4	/* SDRAM 32-bit, CAS/RAS Refresh, .. */
+#define MCR_D2_VALUE	0x500901B4	/* Same w/MRSET now 1 (mode reg cmd) */
 #else /* CONFIG_CPU_SH7751 */
-#define BCR2_D_VALUE	0x2E3C	   /* Area 1-6 width: 32/32/64/16/32/16 */
-#define WCR1_D_VALUE	0x02720777 /* DMA:0 A6:2 A4:2 A3:0 Others:15 */
-#define WCR2_D_VALUE	0xFFFE4FFF /* A6:15 A6B:7 A5:15 A5B:7 A4:15
-				      A3:2  A2:15 A1:15 A0:15 A0B:7  */
-#define WCR3_D_VALUE	0x01717771 /* A6: 0-1 A5: 1-3 A4: 0-1 A3: 1-3
-				      A2: 1-3 A1: 1-3 A0: 0-1 */
-#define RTCOR_D_VALUE	0xA510	   /* Write code A5, data 10 (~15us?) */
-#define SDMR3_ADDRESS	0xFF940110 /* SDMR3 address on 64-bit bus */
-#define MCR_D1_VALUE	0x8801001C /* SDRAM 64-bit, CAS/RAS Refresh, ... */
-#define MCR_D2_VALUE	0xC801001C /* Same w/MRSET now 1 (mode reg cmd) */
+#define BCR2_D_VALUE	0x2E3C		/* Area 1-6 width: 32/32/64/16/32/16 */
+#define WCR1_D_VALUE	0x02720777	/* DMA:0 A6:2 A4:2 A3:0 Others:15 */
+#define WCR2_D_VALUE	0xFFFE4FFF	/* A6:15 A6B:7 A5:15 A5B:7 A4:15
+					   A3:2  A2:15 A1:15 A0:15 A0B:7  */
+#define WCR3_D_VALUE	0x01717771	/* A6: 0-1 A5: 1-3 A4: 0-1 A3: 1-3
+					   A2: 1-3 A1: 1-3 A0: 0-1 */
+#define RTCOR_D_VALUE	0xA510		/* Write code A5, data 10 (~15us?) */
+#define SDMR3_ADDRESS	0xFF940110	/* SDMR3 address on 64-bit bus */
+#define MCR_D1_VALUE	0x8801001C	/* SDRAM 64-bit, CAS/RAS Refresh, .. */
+#define MCR_D2_VALUE	0xC801001C	/* Same w/MRSET now 1 (mode reg cmd) */
 #endif /* CONFIG_CPU_SH7751 */
 
 	.global lowlevel_init
 	.text
-	.align  2
+	.align	2
 
 lowlevel_init:
 
-	mov.l   CCR_A, r1               ! CCR Address
-	mov.l   CCR_D_DISABLE, r0       ! CCR Data
-	mov.l   r0, @r1
+	write32	CCR_A, CCR_D_DISABLE
 
 init_bsc:
-	mov.l	FRQCR_A,r1	/* FRQCR Address */
-	mov.l	FRQCR_D,r0	/* FRQCR Data */
-	mov.w	r0,@r1
+	write16	FRQCR_A, FRQCR_D
 
-	mov.l	BCR1_A,r1	/* BCR1 Address */
-	mov.l	BCR1_D,r0	/* BCR1 Data */
-	mov.l	r0,@r1
+	write32	BCR1_A, BCR1_D
 
-	mov.l	BCR2_A,r1	/* BCR2 Address */
-	mov.l	BCR2_D,r0	/* BCR2 Data */
-	mov.w	r0,@r1
+	write16	BCR2_A, BCR2_D
 
-	mov.l	WCR1_A,r1	/* WCR1 Address */
-	mov.l	WCR1_D,r0	/* WCR1 Data */
-	mov.l	r0,@r1
+	write32	WCR1_A, WCR1_D
 
-	mov.l	WCR2_A,r1	/* WCR2 Address */
-	mov.l	WCR2_D,r0	/* WCR2 Data */
-	mov.l	r0,@r1
+	write32	WCR2_A, WCR2_D
 
-	mov.l	WCR3_A,r1	/* WCR3 Address */
-	mov.l	WCR3_D,r0	/* WCR3 Data */
-	mov.l	r0,@r1
+	write32	WCR3_A, WCR3_D
 
-	mov.l	MCR_A,r1	/* MCR Address */
-	mov.l	MCR_D1,r0	/* MCR Data1 */
-	mov.l	r0,@r1
+	write32	MCR_A, MCR_D1
 
-	mov.l	SDMR3_A,r1	/* Set SDRAM mode */
-	mov	#0,r0
-	mov.b	r0,@r1
+	/* Set SDRAM mode */
+	write8	SDMR3_A, SDMR3_D
 
 	! Do you need PCMCIA setting?
 	! If so, please add the lines here...
 
-	mov.l	RTCNT_A,r1	/* RTCNT Address */
-	mov.l	RTCNT_D,r0	/* RTCNT Data */
-	mov.w	r0,@r1
+	write16	RTCNT_A, RTCNT_D
+
+	write16	RTCOR_A, RTCOR_D
 
-	mov.l	RTCOR_A,r1	/* RTCOR Address */
-	mov.l	RTCOR_D,r0	/* RTCOR Data */
-	mov.w	r0,@r1
+	write16	RTCSR_A, RTCSR_D
 
-	mov.l	RTCSR_A,r1	/* RTCSR Address */
-	mov.l	RTCSR_D,r0	/* RTCSR Data */
-	mov.w	r0,@r1
+	write16	RFCR_A, RFCR_D
 
-	mov.l	RFCR_A,r1	/* RFCR Address */
-	mov.l	RFCR_D,r0	/* RFCR Data */
-	mov.w	r0,@r1		/* Clear reflesh counter */
 	/* Wait DRAM refresh 30 times */
-	mov	#30,r3
+	mov	#30, r3
 1:
-	mov.w	@r1,r0
-	extu.w	r0,r2
-	cmp/hi	r3,r2
+	mov.w	@r1, r0
+	extu.w	r0, r2
+	cmp/hi	r3, r2
 	bf	1b
 
-	mov.l	MCR_A,r1	/* MCR Address */
-	mov.l	MCR_D2,r0	/* MCR Data2 */
-	mov.l	r0,@r1
+	write32	MCR_A, MCR_D2
 
-	mov.l	SDMR3_A,r1	/* Set SDRAM mode */
-	mov	#0,r0
-	mov.b	r0,@r1
+	/* Set SDRAM mode */
+	write8	SDMR3_A, SDMR3_D
 
 	rts
-	 nop
+	nop
 
 	.align	2
 
-CCR_A:          .long   CCR
-CCR_D_DISABLE:  .long   0x0808
+CCR_A:		 .long	CCR
+CCR_D_DISABLE:	.long	0x0808
 FRQCR_A:	.long	FRQCR
 FRQCR_D:
 #ifdef CONFIG_CPU_TYPE_R
@@ -172,6 +146,7 @@ RTCNT_D:	.long	0xA500		/* RTCNT Write Code A5h Data 00h */
 RTCOR_A:	.long	RTCOR
 RTCOR_D:	.long	RTCOR_D_VALUE	/* Set refresh time (about 15us) */
 SDMR3_A:	.long	SDMR3_ADDRESS
+SDMR3_D:	.long	0x00
 MCR_A:		.long	MCR
 MCR_D1:		.long	MCR_D1_VALUE
 MCR_D2:		.long	MCR_D2_VALUE

board/netstar/eeprom.c

@@ -26,6 +26,7 @@
 
 #include <common.h>
 #include <exports.h>
+#include <timestamp.h>
 #include "../drivers/net/smc91111.h"
 
 #define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
@@ -173,7 +174,7 @@ int eeprom(int argc, char *argv[])
 	/* Print help message */
 	if (argv[1][1] == 'h') {
 		printf("VoiceBlue EEPROM writer\n");
-		printf("Built: %s at %s\n", __DATE__ , __TIME__ );
+		printf("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
 		printf("Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
 		return 0;
 	}

board/pm854/pm854.c

@@ -150,7 +150,7 @@ local_bus_init(void)
 	 */
 
 	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {

board/pm856/pm856.c

@@ -306,7 +306,7 @@ local_bus_init(void)
 	 */
 
 	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {

board/renesas/MigoR/lowlevel_init.S

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007
+ * Copyright (C) 2007-2008
  * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
  *
  * Copyright (C) 2007
@@ -27,13 +27,14 @@
 #include <version.h>
 
 #include <asm/processor.h>
+#include <asm/macro.h>
 
 /*
- *  Board specific low level init code, called _very_ early in the
- *  startup sequence. Relocation to SDRAM has not happened yet, no
- *  stack is available, bss section has not been initialised, etc.
+ * Board specific low level init code, called _very_ early in the
+ * startup sequence. Relocation to SDRAM has not happened yet, no
+ * stack is available, bss section has not been initialised, etc.
  *
- *  (Note: As no stack is available, no subroutines can be called...).
+ * (Note: As no stack is available, no subroutines can be called...).
  */
 
 	.global	lowlevel_init
@@ -42,141 +43,83 @@
 	.align	2
 
 lowlevel_init:
-	mov.l	CCR_A, r1	! Address of Cache Control Register
-	mov.l	CCR_D, r0	! Instruction Cache Invalidate
-	mov.l	r0, @r1
+	write32	CCR_A, CCR_D		! Address of Cache Control Register
+					! Instruction Cache Invalidate
 
-	mov.l	MMUCR_A, r1	! Address of MMU Control Register
-	mov.l	MMUCR_D, r0	! TI == TLB Invalidate bit
-	mov.l	r0, @r1
+	write32	MMUCR_A, MMUCR_D	! Address of MMU Control Register
+					! TI == TLB Invalidate bit
 
-	mov.l	MSTPCR0_A, r1	! Address of Power Control Register 0
-	mov.l	MSTPCR0_D, r0	!
-	mov.l	r0, @r1
+	write32	MSTPCR0_A, MSTPCR0_D	! Address of Power Control Register 0
 
-	mov.l	MSTPCR2_A, r1	! Address of Power Control Register 2
-	mov.l	MSTPCR2_D, r0	!
-	mov.l	r0, @r1
+	write32	MSTPCR2_A, MSTPCR2_D	! Address of Power Control Register 2
 
-	mov.l	PFC_PULCR_A, r1
-	mov.w	PFC_PULCR_D, r0
-	mov.w	r0,@r1
+	write16	PFC_PULCR_A, PFC_PULCR_D
 
-	mov.l	PFC_DRVCR_A, r1
-	mov.w	PFC_DRVCR_D, r0
-	mov.w	r0, @r1
+	write16	PFC_DRVCR_A, PFC_DRVCR_D
 
-	mov.l	SBSCR_A, r1	!
-	mov.w	SBSCR_D, r0	!
-	mov.w	r0, @r1
+	write16	SBSCR_A, SBSCR_D
 
-	mov.l	PSCR_A, r1	!
-	mov.w	PSCR_D, r0	!
-	mov.w	r0, @r1
+	write16	PSCR_A, PSCR_D
 
-	mov.l	RWTCSR_A, r1	! 0xA4520004 (Watchdog Control / Status Register)
-	mov.w	RWTCSR_D_1, r0	! 0xA507 -> timer_STOP/WDT_CLK=max
-	mov.w	r0, @r1
+	write16	RWTCSR_A, RWTCSR_D_1	! 0xA4520004 (Watchdog Control / Status Register)
+					! 0xA507 -> timer_STOP / WDT_CLK = max
 
-	mov.l	RWTCNT_A, r1	! 0xA4520000 (Watchdog Count Register)
-	mov.w	RWTCNT_D, r0	! 0x5A00 -> Clear
-	mov.w	r0, @r1
+	write16	RWTCNT_A, RWTCNT_D	! 0xA4520000 (Watchdog Count Register)
+					! 0x5A00 -> Clear
 
-	mov.l	RWTCSR_A, r1	! 0xA4520004 (Watchdog Control / Status Register)
-	mov.w	RWTCSR_D_2, r0	! 0xA504 -> timer_STOP/CLK=500ms
-	mov.w	r0, @r1
+	write16	RWTCSR_A, RWTCSR_D_2	! 0xA4520004 (Watchdog Control / Status Register)
+					! 0xA504 -> timer_STOP / CLK = 500ms
 
-	mov.l	DLLFRQ_A, r1	! 20080115
-	mov.l	DLLFRQ_D, r0	! 20080115
-	mov.l	r0, @r1
+	write32	DLLFRQ_A, DLLFRQ_D	! 20080115
+					! 20080115
 
-	mov.l	FRQCR_A, r1		! 0xA4150000 Frequency control register
-	mov.l	FRQCR_D, r0	! 20080115
-	mov.l	r0, @r1
+	write32	FRQCR_A, FRQCR_D	! 0xA4150000 Frequency control register
+					! 20080115
 
-	mov.l	CCR_A, r1		! Address of Cache Control Register
-	mov.l	CCR_D_2, r0	! ??
-	mov.l	r0, @r1
+	write32	CCR_A, CCR_D_2		! Address of Cache Control Register
+					! ??
 
 bsc_init:
-	mov.l	CMNCR_A, r1	! CMNCR address -> R1
-	mov.l	CMNCR_D, r0	! CMNCR data    -> R0
-	mov.l	r0, @r1		! CMNCR set
+	write32	CMNCR_A, CMNCR_D
 
-	mov.l	CS0BCR_A, r1	! CS0BCR address -> R1
-	mov.l	CS0BCR_D, r0	! CS0BCR data    -> R0
-	mov.l	r0, @r1		! CS0BCR set
+	write32	CS0BCR_A, CS0BCR_D
 
-	mov.l	CS4BCR_A, r1	! CS4BCR address -> R1
-	mov.l	CS4BCR_D, r0	! CS4BCR data    -> R0
-	mov.l	r0, @r1		! CS4BCR set
+	write32	CS4BCR_A, CS4BCR_D
 
-	mov.l	CS5ABCR_A, r1	! CS5ABCR address -> R1
-	mov.l	CS5ABCR_D, r0	! CS5ABCR data    -> R0
-	mov.l	r0, @r1		! CS5ABCR set
+	write32	CS5ABCR_A, CS5ABCR_D
 
-	mov.l	CS5BBCR_A, r1	! CS5BBCR address -> R1
-	mov.l	CS5BBCR_D, r0	! CS5BBCR data    -> R0
-	mov.l	r0, @r1		! CS5BBCR set
+	write32	CS5BBCR_A, CS5BBCR_D
 
-	mov.l	CS6ABCR_A, r1	! CS6ABCR address -> R1
-	mov.l	CS6ABCR_D, r0	! CS6ABCR data    -> R0
-	mov.l	r0, @r1		! CS6ABCR set
+	write32	CS6ABCR_A, CS6ABCR_D
 
-	mov.l	CS0WCR_A, r1	! CS0WCR address -> R1
-	mov.l	CS0WCR_D, r0	! CS0WCR data    -> R0
-	mov.l	r0, @r1		! CS0WCR set
+	write32	CS0WCR_A, CS0WCR_D
 
-	mov.l	CS4WCR_A, r1	! CS4WCR address -> R1
-	mov.l	CS4WCR_D, r0	! CS4WCR data    -> R0
-	mov.l	r0, @r1		! CS4WCR set
+	write32	CS4WCR_A, CS4WCR_D
 
-	mov.l	CS5AWCR_A, r1	! CS5AWCR address -> R1
-	mov.l	CS5AWCR_D, r0	! CS5AWCR data    -> R0
-	mov.l	r0, @r1		! CS5AWCR set
+	write32	CS5AWCR_A, CS5AWCR_D
 
-	mov.l	CS5BWCR_A, r1	! CS5BWCR address -> R1
-	mov.l	CS5BWCR_D, r0	! CS5BWCR data    -> R0
-	mov.l	r0, @r1		! CS5BWCR set
+	write32	CS5BWCR_A, CS5BWCR_D
 
-	mov.l	CS6AWCR_A, r1	! CS6AWCR address -> R1
-	mov.l	CS6AWCR_D, r0	! CS6AWCR data    -> R0
-	mov.l	r0, @r1		! CS6AWCR set
+	write32	CS6AWCR_A, CS6AWCR_D
 
 	! SDRAM initialization
-	mov.l	SDCR_A, r1	! SB_SDCR address -> R1
-	mov.l	SDCR_D, r0	! SB_SDCR data    -> R0
-	mov.l	r0, @r1		! SB_SDCR set
+	write32	SDCR_A, SDCR_D
 
-	mov.l	SDWCR_A, r1	! SB_SDWCR address -> R1
-	mov.l	SDWCR_D, r0	! SB_SDWCR data    -> R0
-	mov.l	r0, @r1		! SB_SDWCR set
+	write32	SDWCR_A, SDWCR_D
 
-	mov.l	SDPCR_A, r1	! SB_SDPCR address -> R1
-	mov.l	SDPCR_D, r0	! SB_SDPCR data    -> R0
-	mov.l	r0, @r1		! SB_SDPCR set
+	write32	SDPCR_A, SDPCR_D
 
-	mov.l	RTCOR_A, r1	! SB_RTCOR address -> R1
-	mov.l	RTCOR_D, r0	! SB_RTCOR data    -> R0
-	mov.l	r0, @r1		! SB_RTCOR set
+	write32	RTCOR_A, RTCOR_D
 
-	mov.l	RTCNT_A, r1	! SB_RTCNT address -> R1
-	mov.l	RTCNT_D, r0	! SB_RTCNT data    -> R0
-	mov.l	r0, @r1
+	write32	RTCNT_A, RTCNT_D
 
-	mov.l	RTCSR_A, r1	! SB_RTCSR address -> R1
-	mov.l	RTCSR_D, r0	! SB_RTCSR data    -> R0
-	mov.l	r0, @r1		! SB_RTCSR set
+	write32	RTCSR_A, RTCSR_D
 
-	mov.l	RFCR_A, r1	! SB_RFCR address -> R1
-	mov.l	RFCR_D, r0	! SB_RFCR data    -> R0
-	mov.l	r0, @r1
+	write32	RFCR_A, RFCR_D
 
-	mov.l	SDMR3_A, r1	! SDMR3 address -> R1
-	mov	#0x00, r0	! SDMR3 data    -> R0
-	mov.b	r0, @r1		! SDMR3 set
+	write8	SDMR3_A, SDMR3_D
 
-	! BL bit off (init = ON)  (?!?)
+	! BL bit off (init = ON) (?!?)
 
 	stc	sr, r0				! BL bit off(init=ON)
 	mov.l	SR_MASK_D, r1
@@ -211,25 +154,25 @@ PFC_PULCR_D:	.long	0x6000
 PFC_DRVCR_D:	.long	0x0464
 FRQCR_D:	.long	0x07033639
 PLLCR_D:	.long	0x00005000
-DLLFRQ_D:	.long	0x000004F6	! 20080115
+DLLFRQ_D:	.long	0x000004F6
 
 CMNCR_A:	.long	CMNCR
-CMNCR_D:	.long	0x0000001B	! 20080115
-CS0BCR_A:	.long	CS0BCR		! Flash bank 1
+CMNCR_D:	.long	0x0000001B
+CS0BCR_A:	.long	CS0BCR
 CS0BCR_D:	.long	0x24920400
-CS4BCR_A:	.long	CS4BCR		!
-CS4BCR_D:	.long	0x10003400	! 20080115
-CS5ABCR_A:	.long	CS5ABCR		!
+CS4BCR_A:	.long	CS4BCR
+CS4BCR_D:	.long	0x00003400
+CS5ABCR_A:	.long	CS5ABCR
 CS5ABCR_D:	.long	0x24920400
-CS5BBCR_A:	.long	CS5BBCR		!
+CS5BBCR_A:	.long	CS5BBCR
 CS5BBCR_D:	.long	0x24920400
-CS6ABCR_A:	.long	CS6ABCR		!
+CS6ABCR_A:	.long	CS6ABCR
 CS6ABCR_D:	.long	0x24920400
 
 CS0WCR_A:	.long	CS0WCR
 CS0WCR_D:	.long	0x00000380
 CS4WCR_A:	.long	CS4WCR
-CS4WCR_D:	.long	0x00100A81	! 20080115
+CS4WCR_D:	.long	0x00110080
 CS5AWCR_A:	.long	CS5AWCR
 CS5AWCR_D:	.long	0x00000300
 CS5BWCR_A:	.long	CS5BWCR
@@ -238,20 +181,21 @@ CS6AWCR_A:	.long	CS6AWCR
 CS6AWCR_D:	.long	0x00000300
 
 SDCR_A:		.long	SBSC_SDCR
-SDCR_D:		.long	0x80160809	! 20080115
+SDCR_D:		.long	0x80160809
 SDWCR_A:	.long	SBSC_SDWCR
-SDWCR_D:	.long	0x0014450C	! 20080115
+SDWCR_D:	.long	0x0014450C
 SDPCR_A:	.long	SBSC_SDPCR
 SDPCR_D:	.long	0x00000087
 RTCOR_A:	.long	SBSC_RTCOR
 RTCNT_A:	.long	SBSC_RTCNT
 RTCNT_D:	.long	0xA55A0012
-RTCOR_D:	.long	0xA55A001C	! 20080115
+RTCOR_D:	.long	0xA55A001C
 RTCSR_A:	.long	SBSC_RTCSR
 RFCR_A:		.long	SBSC_RFCR
 RFCR_D:		.long	0xA55A0221
-RTCSR_D:	.long	0xA55A009a	! 20080115
-SDMR3_A:	.long	0xFE581180	! 20080115
+RTCSR_D:	.long	0xA55A009a
+SDMR3_A:	.long	0xFE581180
+SDMR3_D:	.long	0x0
 
 SR_MASK_D:	.long	0xEFFFFF0F
 
@@ -260,5 +204,5 @@ SR_MASK_D:	.long	0xEFFFFF0F
 SBSCR_D:	.word	0x0044
 PSCR_D:		.word	0x0000
 RWTCSR_D_1:	.word	0xA507
-RWTCSR_D_2:	.word	0xA504		! 20080115
+RWTCSR_D_2:	.word	0xA504
 RWTCNT_D:	.word	0x5A00

board/renesas/ap325rxa/lowlevel_init.S

@@ -23,6 +23,7 @@
 #include <config.h>
 #include <version.h>
 #include <asm/processor.h>
+#include <asm/macro.h>
 
 /*
  * Board specific low level init code, called _very_ early in the
@@ -38,113 +39,59 @@
 	.align	2
 
 lowlevel_init:
-	mov.l	DRVCRA_A, r1
-	mov.l 	DRVCRA_D, r0
-	mov.w	r0, @r1
+	write16	DRVCRA_A, DRVCRA_D
 
-	mov.l	DRVCRB_A, r1
-	mov.l 	DRVCRB_D, r0
-	mov.w	r0, @r1
+	write16	DRVCRB_A, DRVCRB_D
 
-	mov.l	RWTCSR_A, r1
-	mov.l 	RWTCSR_D1, r0
-	mov.w	r0, @r1
+	write16	RWTCSR_A, RWTCSR_D1
 
-	mov.l	RWTCNT_A, r1
-	mov.l 	RWTCNT_D, r0
-	mov.w	r0, @r1
+	write16	RWTCNT_A, RWTCNT_D
 
-	mov.l	RWTCSR_A, r1
-	mov.l 	RWTCSR_D2, r0
-	mov.w	r0, @r1
+	write16	RWTCSR_A, RWTCSR_D2
 
-	mov.l	FRQCR_A, r1
-	mov.l 	FRQCR_D, r0
-	mov.l	r0, @r1
+	write32	FRQCR_A, FRQCR_D
 
-	mov.l	CMNCR_A, r1
-	mov.l	CMNCR_D, r0
-	mov.l	r0, @r1
+	write32	CMNCR_A, CMNCR_D
 
-	mov.l	CS0BCR_A ,r1
-	mov.l	CS0BCR_D ,r0
-	mov.l	r0, @r1
+	write32	CS0BCR_A, CS0BCR_D
 
-	mov.l	CS4BCR_A ,r1
-	mov.l	CS4BCR_D ,r0
-	mov.l	r0, @r1
+	write32	CS4BCR_A, CS4BCR_D
 
-	mov.l	CS5ABCR_A ,r1
-	mov.l	CS5ABCR_D ,r0
-	mov.l	r0, @r1
+	write32	CS5ABCR_A, CS5ABCR_D
 
-	mov.l	CS5BBCR_A ,r1
-	mov.l	CS5BBCR_D ,r0
-	mov.l	r0, @r1
+	write32	CS5BBCR_A, CS5BBCR_D
 
-	mov.l	CS6ABCR_A ,r1
-	mov.l	CS6ABCR_D ,r0
-	mov.l	r0, @r1
+	write32	CS6ABCR_A, CS6ABCR_D
 
-	mov.l	CS6BBCR_A ,r1
-	mov.l	CS6BBCR_D ,r0
-	mov.l	r0, @r1
+	write32	CS6BBCR_A, CS6BBCR_D
 
-	mov.l	CS0WCR_A ,r1
-	mov.l	CS0WCR_D ,r0
-	mov.l	r0, @r1
+	write32	CS0WCR_A, CS0WCR_D
 
-	mov.l	CS4WCR_A ,r1
-	mov.l	CS4WCR_D ,r0
-	mov.l	r0, @r1
+	write32	CS4WCR_A, CS4WCR_D
 
-	mov.l	CS5AWCR_A ,r1
-	mov.l	CS5AWCR_D ,r0
-	mov.l	r0, @r1
+	write32	CS5AWCR_A, CS5AWCR_D
 
-	mov.l	CS5BWCR_A ,r1
-	mov.l	CS5BWCR_D ,r0
-	mov.l	r0, @r1
+	write32	CS5BWCR_A, CS5BWCR_D
 
-	mov.l	CS6AWCR_A ,r1
-	mov.l	CS6AWCR_D ,r0
-	mov.l	r0, @r1
+	write32	CS6AWCR_A, CS6AWCR_D
 
-	mov.l	CS6BWCR_A ,r1
-	mov.l	CS6BWCR_D ,r0
-	mov.l	r0, @r1
+	write32	CS6BWCR_A, CS6BWCR_D
 
-	mov.l	SBSC_SDCR_A, r1
-	mov.l 	SBSC_SDCR_D1, r0
-	mov.l	r0, @r1
+	write32	SBSC_SDCR_A, SBSC_SDCR_D1
 
-	mov.l	SBSC_SDWCR_A, r1
-	mov.l 	SBSC_SDWCR_D, r0
-	mov.l	r0, @r1
+	write32	SBSC_SDWCR_A, SBSC_SDWCR_D
 
-	mov.l	SBSC_SDPCR_A, r1
-	mov.l 	SBSC_SDPCR_D, r0
-	mov.l	r0, @r1
+	write32	SBSC_SDPCR_A, SBSC_SDPCR_D
 
-	mov.l	SBSC_RTCSR_A, r1
-	mov.l 	SBSC_RTCSR_D, r0
-	mov.l	r0, @r1
+	write32	SBSC_RTCSR_A, SBSC_RTCSR_D
 
-	mov.l	SBSC_RTCNT_A, r1
-	mov.l 	SBSC_RTCNT_D, r0
-	mov.l	r0, @r1
+	write32	SBSC_RTCNT_A, SBSC_RTCNT_D
 
-	mov.l	SBSC_RTCOR_A, r1
-	mov.l 	SBSC_RTCOR_D, r0
-	mov.l	r0, @r1
+	write32	SBSC_RTCOR_A, SBSC_RTCOR_D
 
-	mov.l	SBSC_SDMR3_A1, r1
-	mov.l 	SBSC_SDMR3_D, r0
-	mov.b	r0, @r1
+	write8	SBSC_SDMR3_A1, SBSC_SDMR3_D
 
-	mov.l	SBSC_SDMR3_A2, r1
-	mov.l 	SBSC_SDMR3_D, r0
-	mov.b	r0, @r1
+	write8	SBSC_SDMR3_A2, SBSC_SDMR3_D
 
 	mov.l	SLEEP_CNT, r1
 2:	tst	r1, r1
@@ -152,19 +99,13 @@ lowlevel_init:
 	bf/s	2b
 	dt	r1
 
-	mov.l	SBSC_SDMR3_A3, r1
-	mov.l 	SBSC_SDMR3_D, r0
-	mov.b	r0, @r1
+	write8	SBSC_SDMR3_A3, SBSC_SDMR3_D
 
-	mov.l	SBSC_SDCR_A, r1
-	mov.l 	SBSC_SDCR_D2, r0
-	mov.l	r0, @r1
+	write32	SBSC_SDCR_A, SBSC_SDCR_D2
 
-	mov.l	CCR_A, r1
-	mov.l 	CCR_D, r0
-	mov.l	r0, @r1
+	write32	CCR_A, CCR_D
 
-	! BL bit off (init = ON)  (?!?)
+	! BL bit off (init = ON) (?!?)
 
 	stc	sr, r0				! BL bit off(init=ON)
 	mov.l	SR_MASK_D, r1
@@ -211,7 +152,7 @@ SBSC_SDMR3_D:	.long	0x00
 CMNCR_A:	.long	CMNCR
 CS0BCR_A:	.long	CS0BCR
 CS4BCR_A:	.long	CS4BCR
-CS5ABCR_A:	.long 	CS5ABCR
+CS5ABCR_A:	.long	CS5ABCR
 CS5BBCR_A:	.long	CS5BBCR
 CS6ABCR_A:	.long	CS6ABCR
 CS6BBCR_A:	.long	CS6BBCR

board/renesas/r2dplus/lowlevel_init.S

@@ -8,105 +8,64 @@
 #include <version.h>
 
 #include <asm/processor.h>
+#include <asm/macro.h>
 
 	.global lowlevel_init
 	.text
-	.align  2
+	.align	2
 
 lowlevel_init:
 
-	mov.l	CCR_A, r1
-	mov.l	CCR_D_D, r0
-	mov.l	r0,@r1
+	write32	CCR_A, CCR_D_D
 
-	mov.l	MMUCR_A,r1
-	mov.l	MMUCR_D,r0
-	mov.w	r0,@r1
+	write32	MMUCR_A, MMUCR_D
 
-	mov.l	BCR1_A,r1
-	mov.l	BCR1_D,r0
-	mov.l	r0,@r1
+	write32	BCR1_A, BCR1_D
 
-	mov.l	BCR2_A,r1
-	mov.l	BCR2_D,r0
-	mov.w	r0,@r1
+	write16	BCR2_A, BCR2_D
 
-	mov.l	BCR3_A,r1
-	mov.l	BCR3_D,r0
-	mov.w	r0,@r1
+	write16	BCR3_A, BCR3_D
 
-	mov.l	BCR4_A,r1
-	mov.l	BCR4_D,r0
-	mov.l	r0,@r1
+	write32	BCR4_A, BCR4_D
 
-	mov.l	WCR1_A,r1
-	mov.l	WCR1_D,r0
-	mov.l	r0,@r1
+	write32	WCR1_A, WCR1_D
 
-	mov.l	WCR2_A,r1
-	mov.l	WCR2_D,r0
-	mov.l	r0,@r1
+	write32	WCR2_A, WCR2_D
 
-	mov.l	WCR3_A,r1
-	mov.l	WCR3_D,r0
-	mov.l	r0,@r1
+	write32	WCR3_A, WCR3_D
 
-	mov.l	PCR_A,r1
-	mov.l	PCR_D,r0
-	mov.w	r0,@r1
+	write16	PCR_A, PCR_D
 
-	mov.l	LED_A,r1
-	mov	#0xff,r0
-	mov.w	r0,@r1
+	write16	LED_A, LED_D
 
-	mov.l	MCR_A,r1
-	mov.l	MCR_D1,r0
-	mov.l	r0,@r1
+	write32	MCR_A, MCR_D1
 
-	mov.l	RTCNT_A,r1
-	mov.l	RTCNT_D,r0
-	mov.w	r0,@r1
+	write16	RTCNT_A, RTCNT_D
 
-	mov.l	RTCOR_A,r1
-	mov.l	RTCOR_D,r0
-	mov.w	r0,@r1
+	write16	RTCOR_A, RTCOR_D
 
-	mov.l	RFCR_A,r1
-	mov.l	RFCR_D,r0
-	mov.w	r0,@r1
+	write16	RFCR_A, RFCR_D
 
-	mov.l	RTCSR_A,r1
-	mov.l	RTCSR_D,r0
-	mov.w	r0,@r1
+	write16	RTCSR_A, RTCSR_D
 
-	mov.l	SDMR3_A,r1
-	mov	#0x55,r0
-	mov.b	r0,@r1
+	write8	SDMR3_A, SDMR3_D0
 
 	/* Wait DRAM refresh 30 times */
-	mov.l	RFCR_A,r1
-	mov	#30,r3
+	mov.l	RFCR_A, r1
+	mov	#30, r3
 1:
-	mov.w	@r1,r0
-	extu.w	r0,r2
-	cmp/hi	r3,r2
+	mov.w	@r1, r0
+	extu.w	r0, r2
+	cmp/hi	r3, r2
 	bf	1b
 
-	mov.l	MCR_A,r1
-	mov.l	MCR_D2,r0
-	mov.l	r0,@r1
+	write32	MCR_A, MCR_D2
 
-	mov.l	SDMR3_A,r1
-	mov	#0,r0
-	mov.b	r0,@r1
+	write8	SDMR3_A, SDMR3_D1
 
-	mov.l	IRLMASK_A,r1
-	mov.l	IRLMASK_D,r0
-	mov.l	r0,@r1
+	write32	IRLMASK_A, IRLMASK_D
 
-	mov.l	CCR_A, r1
-	mov.l	CCR_D_E, r0
-	mov.l	r0, @r1
+	write32	CCR_A, CCR_D_E
 
 	rts
 	nop
@@ -118,34 +77,36 @@ CCR_D_E:	.long	0x8000090B
 
 FRQCR_A:	.long	FRQCR		/* FRQCR Address */
 FRQCR_D:	.long	0x00000e0a	/* 03/07/15 modify */
-BCR1_A:	.long	BCR1		/* BCR1 Address */
-BCR1_D:	.long	0x00180008
-BCR2_A:	.long	BCR2		/* BCR2 Address */
-BCR2_D:	.long   0xabe8
-BCR3_A:	.long	BCR3		/* BCR3 Address */
-BCR3_D:	.long	0x0000
-BCR4_A:	.long	BCR4		/* BCR4 Address */
-BCR4_D:	.long	0x00000010
-WCR1_A:	.long	WCR1		/* WCR1 Address */
-WCR1_D:	.long	0x33343333
-WCR2_A:	.long	WCR2		/* WCR2 Address */
-WCR2_D:	.long	0xcff86fbf
-WCR3_A:	.long	WCR3		/* WCR3 Address */
-WCR3_D:	.long	0x07777707
+BCR1_A:		.long	BCR1		/* BCR1 Address */
+BCR1_D:		.long	0x00180008
+BCR2_A:		.long	BCR2		/* BCR2 Address */
+BCR2_D:		.long	0xabe8
+BCR3_A:		.long	BCR3		/* BCR3 Address */
+BCR3_D:		.long	0x0000
+BCR4_A:		.long	BCR4		/* BCR4 Address */
+BCR4_D:		.long	0x00000010
+WCR1_A:		.long	WCR1		/* WCR1 Address */
+WCR1_D:		.long	0x33343333
+WCR2_A:		.long	WCR2		/* WCR2 Address */
+WCR2_D:		.long	0xcff86fbf
+WCR3_A:		.long	WCR3		/* WCR3 Address */
+WCR3_D:		.long	0x07777707
 LED_A:		.long	0x04000036	/* LED Address */
+LED_D:		.long	0xFF		/* LED Data */
 RTCNT_A:	.long	RTCNT		/* RTCNT Address */
 RTCNT_D:	.long	0xA500		/* RTCNT Write Code A5h Data 00h */
 RTCOR_A:	.long	RTCOR		/* RTCOR Address */
-RTCOR_D:	.long	0xA534		/* RTCOR Write Code  */
+RTCOR_D:	.long	0xA534		/* RTCOR Write Code */
 RTCSR_A:	.long	RTCSR		/* RTCSR Address */
 RTCSR_D:	.long	0xA510		/* RTCSR Write Code */
-SDMR3_A:	.long   0xFF9400CC	/* SDMR3 Address */
-SDMR3_D:	.long	0x55
+SDMR3_A:	.long	0xFF9400CC	/* SDMR3 Address */
+SDMR3_D0:	.long	0x55
+SDMR3_D1:	.long	0x00
 MCR_A:		.long	MCR		/* MCR Address */
-MCR_D1:	.long	0x081901F4	/* MRSET:'0' */
-MCR_D2:	.long	0x481901F4	/* MRSET:'1' */
-RFCR_A:	.long	RFCR		/* RFCR Address */
-RFCR_D:	.long	0xA400		/* RFCR Write Code A4h Data 00h */
+MCR_D1:		.long	0x081901F4	/* MRSET:'0' */
+MCR_D2:		.long	0x481901F4	/* MRSET:'1' */
+RFCR_A:		.long	RFCR		/* RFCR Address */
+RFCR_D:		.long	0xA400		/* RFCR Write Code A4h Data 00h */
 PCR_A:		.long	PCR		/* PCR Address */
 PCR_D:		.long	0x0000
 MMUCR_A:	.long	MMUCR		/* MMUCCR Address */

board/renesas/r7780mp/lowlevel_init.S

@@ -22,13 +22,14 @@
 #include <config.h>
 #include <version.h>
 #include <asm/processor.h>
+#include <asm/macro.h>
 
 /*
- *  Board specific low level init code, called _very_ early in the
- *  startup sequence. Relocation to SDRAM has not happened yet, no
- *  stack is available, bss section has not been initialised, etc.
+ * Board specific low level init code, called _very_ early in the
+ * startup sequence. Relocation to SDRAM has not happened yet, no
+ * stack is available, bss section has not been initialised, etc.
  *
- *  (Note: As no stack is available, no subroutines can be called...).
+ * (Note: As no stack is available, no subroutines can be called...).
  */
 
 	.global	lowlevel_init
@@ -38,63 +39,36 @@
 
 lowlevel_init:
 
-	mov.l	CCR_A, r1	/* Address of Cache Control Register */
-	mov.l	CCR_D, r0	/* Instruction Cache Invalidate */
-	mov.l	r0, @r1
+	write32	CCR_A, CCR_D		/* Address of Cache Control Register */
+					/* Instruction Cache Invalidate */
 
-	mov.l	FRQCR_A, r1	/* Frequency control register */
-	mov.l	FRQCR_D, r0
-	mov.l	r0, @r1
+	write32	FRQCR_A, FRQCR_D	/* Frequency control register */
 
 	/* pin_multi_setting */
-	mov.l   BBG_PMMR_A,r1
-	mov.l   BBG_PMMR_D_PMSR1,r0
-	mov.l   r0,@r1
+	write32	BBG_PMMR_A, BBG_PMMR_D_PMSR1
 
-	mov.l   BBG_PMSR1_A,r1
-	mov.l   BBG_PMSR1_D,r0
-	mov.l   r0,@r1
+	write32	BBG_PMSR1_A, BBG_PMSR1_D
 
-	mov.l   BBG_PMMR_A,r1
-	mov.l   BBG_PMMR_D_PMSR2,r0
-	mov.l   r0,@r1
+	write32	BBG_PMMR_A, BBG_PMMR_D_PMSR2
 
-	mov.l   BBG_PMSR2_A,r1
-	mov.l   BBG_PMSR2_D,r0
-	mov.l   r0,@r1
+	write32	BBG_PMSR2_A, BBG_PMSR2_D
 
-	mov.l   BBG_PMMR_A,r1
-	mov.l   BBG_PMMR_D_PMSR3,r0
-	mov.l   r0,@r1
+	write32	BBG_PMMR_A, BBG_PMMR_D_PMSR3
 
-	mov.l   BBG_PMSR3_A,r1
-	mov.l   BBG_PMSR3_D,r0
-	mov.l   r0,@r1
+	write32	BBG_PMSR3_A, BBG_PMSR3_D
 
-	mov.l   BBG_PMMR_A,r1
-	mov.l   BBG_PMMR_D_PMSR4,r0
-	mov.l   r0,@r1
+	write32	BBG_PMMR_A, BBG_PMMR_D_PMSR4
 
-	mov.l   BBG_PMSR4_A,r1
-	mov.l   BBG_PMSR4_D,r0
-	mov.l   r0,@r1
+	write32	BBG_PMSR4_A, BBG_PMSR4_D
 
-	mov.l   BBG_PMMR_A,r1
-	mov.l   BBG_PMMR_D_PMSRG,r0
-	mov.l   r0,@r1
+	write32	BBG_PMMR_A, BBG_PMMR_D_PMSRG
 
-	mov.l   BBG_PMSRG_A,r1
-	mov.l   BBG_PMSRG_D,r0
-	mov.l   r0,@r1
+	write32	BBG_PMSRG_A, BBG_PMSRG_D
 
 	/* cpg_setting */
-	mov.l   FRQCR_A,r1
-	mov.l   FRQCR_D,r0
-	mov.l   r0,@r1
+	write32	FRQCR_A, FRQCR_D
 
-	mov.l   DLLCSR_A,r1
-	mov.l   DLLCSR_D,r0
-	mov.l   r0,@r1
+	write32	DLLCSR_A, DLLCSR_D
 
 	nop
 	nop
@@ -108,111 +82,79 @@ lowlevel_init:
 	nop
 
 	/* wait 200us */
-	mov.l   REPEAT0_R3,r3
-	mov     #0,r2
+	mov.l	REPEAT0_R3, r3
+	mov	#0, r2
 repeat0:
-	add     #1,r2
-	cmp/hs  r3,r2
-	bf      repeat0
+	add	#1, r2
+	cmp/hs	r3, r2
+	bf	repeat0
 	nop
 
 	/* bsc_setting */
-	mov.l	MMSELR_A,r1
-	mov.l	MMSELR_D,r0
-	mov.l	r0,@r1
+	write32	MMSELR_A, MMSELR_D
 
-	mov.l	BCR_A,r1
-	mov.l	BCR_D,r0
-	mov.l	r0,@r1
+	write32	BCR_A, BCR_D
 
-	mov.l	CS0BCR_A,r1
-	mov.l	CS0BCR_D,r0
-	mov.l	r0,@r1
+	write32	CS0BCR_A, CS0BCR_D
 
-	mov.l	CS1BCR_A,r1
-	mov.l	CS1BCR_D,r0
-	mov.l	r0,@r1
+	write32	CS1BCR_A, CS1BCR_D
 
-	mov.l	CS2BCR_A,r1
-	mov.l	CS2BCR_D,r0
-	mov.l	r0,@r1
+	write32	CS2BCR_A, CS2BCR_D
 
-	mov.l	CS4BCR_A,r1
-	mov.l	CS4BCR_D,r0
-	mov.l	r0,@r1
+	write32	CS4BCR_A, CS4BCR_D
 
-	mov.l	CS5BCR_A,r1
-	mov.l	CS5BCR_D,r0
-	mov.l	r0,@r1
+	write32	CS5BCR_A, CS5BCR_D
 
-	mov.l	CS6BCR_A,r1
-	mov.l	CS6BCR_D,r0
-	mov.l	r0,@r1
+	write32	CS6BCR_A, CS6BCR_D
 
-	mov.l	CS0WCR_A,r1
-	mov.l	CS0WCR_D,r0
-	mov.l	r0,@r1
+	write32	CS0WCR_A, CS0WCR_D
 
-	mov.l	CS1WCR_A,r1
-	mov.l	CS1WCR_D,r0
-	mov.l	r0,@r1
+	write32	CS1WCR_A, CS1WCR_D
 
-	mov.l	CS2WCR_A,r1
-	mov.l	CS2WCR_D,r0
-	mov.l	r0,@r1
+	write32	CS2WCR_A, CS2WCR_D
 
-	mov.l	CS4WCR_A,r1
-	mov.l	CS4WCR_D,r0
-	mov.l	r0,@r1
+	write32	CS4WCR_A, CS4WCR_D
 
-	mov.l	CS5WCR_A,r1
-	mov.l	CS5WCR_D,r0
-	mov.l	r0,@r1
+	write32	CS5WCR_A, CS5WCR_D
 
-	mov.l	CS6WCR_A,r1
-	mov.l	CS6WCR_D,r0
-	mov.l	r0,@r1
+	write32	CS6WCR_A, CS6WCR_D
 
-	mov.l	CS5PCR_A,r1
-	mov.l	CS5PCR_D,r0
-	mov.l	r0,@r1
+	write32	CS5PCR_A, CS5PCR_D
 
-	mov.l	CS6PCR_A,r1
-	mov.l	CS6PCR_D,r0
-	mov.l	r0,@r1
+	write32	CS6PCR_A, CS6PCR_D
 
 	/* ddr_setting */
 	/* wait 200us */
-	mov.l   REPEAT0_R3,r3
-	mov     #0,r2
+	mov.l	REPEAT0_R3, r3
+	mov	#0, r2
 repeat1:
-	add     #1,r2
-	cmp/hs  r3,r2
-	bf      repeat1
+	add	#1, r2
+	cmp/hs	r3, r2
+	bf	repeat1
 	nop
 
-	mov.l   MIM_U_A,r0
-	mov.l   MIM_U_D,r1
+	mov.l	MIM_U_A, r0
+	mov.l	MIM_U_D, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
-	mov.l	MIM_L_A,r0
-	mov.l	MIM_L_D0,r1
+	mov.l	MIM_L_A, r0
+	mov.l	MIM_L_D0, r1
 	synco
-	mov.l	r1,@r0
+	mov.l	r1, @r0
 	synco
 
-	mov.l   STR_L_A,r0
-	mov.l   STR_L_D,r1
+	mov.l	STR_L_A, r0
+	mov.l	STR_L_D, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
-	mov.l   SDR_L_A,r0
-	mov.l   SDR_L_D,r1
+	mov.l	SDR_L_A, r0
+	mov.l	SDR_L_D, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
 	nop
@@ -220,193 +162,193 @@ repeat1:
 	nop
 	nop
 
-	mov.l   SCR_L_A,r0
-	mov.l   SCR_L_D0,r1
+	mov.l	SCR_L_A, r0
+	mov.l	SCR_L_D0, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
-	mov.l   SCR_L_A,r0
-	mov.l   SCR_L_D1,r1
+	mov.l	SCR_L_A, r0
+	mov.l	SCR_L_D1, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
 	nop
 	nop
 	nop
 
-	mov.l   EMRS_A,r0
-	mov.l   EMRS_D,r1
+	mov.l	EMRS_A, r0
+	mov.l	EMRS_D, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
 	nop
 	nop
 	nop
 
-	mov.l   MRS1_A,r0
-	mov.l   MRS1_D,r1
+	mov.l	MRS1_A, r0
+	mov.l	MRS1_D, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
 	nop
 	nop
 	nop
 
-	mov.l   SCR_L_A,r0
-	mov.l   SCR_L_D2,r1
+	mov.l	SCR_L_A, r0
+	mov.l	SCR_L_D2, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
 	nop
 	nop
 	nop
 
-	mov.l   SCR_L_A,r0
-	mov.l   SCR_L_D3,r1
+	mov.l	SCR_L_A, r0
+	mov.l	SCR_L_D3, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
 	nop
 	nop
 	nop
 
-	mov.l   SCR_L_A,r0
-	mov.l   SCR_L_D4,r1
+	mov.l	SCR_L_A, r0
+	mov.l	SCR_L_D4, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
 	nop
 	nop
 	nop
 
-	mov.l   MRS2_A,r0
-	mov.l   MRS2_D,r1
+	mov.l	MRS2_A, r0
+	mov.l	MRS2_D, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
 	nop
 	nop
 	nop
 
-	mov.l   SCR_L_A,r0
-	mov.l   SCR_L_D5,r1
+	mov.l	SCR_L_A, r0
+	mov.l	SCR_L_D5, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
 	/* wait 200us */
-	mov.l   REPEAT0_R1,r3
-	mov     #0,r2
+	mov.l	REPEAT0_R1, r3
+	mov	#0, r2
 repeat2:
-	add     #1,r2
-	cmp/hs  r3,r2
-	bf      repeat2
+	add	#1, r2
+	cmp/hs	r3, r2
+	bf	repeat2
 
 	synco
 
-	mov.l   MIM_L_A,r0
-	mov.l   MIM_L_D1,r1
+	mov.l	MIM_L_A, r0
+	mov.l	MIM_L_D1, r1
 	synco
-	mov.l   r1,@r0
+	mov.l	r1, @r0
 	synco
 
 	rts
 	nop
 	.align	4
 
-RWTCSR_D_1:				.word	0xA507
-RWTCSR_D_2:				.word	0xA507
-RWTCNT_D:				.word	0x5A00
+RWTCSR_D_1:		.word	0xA507
+RWTCSR_D_2:		.word	0xA507
+RWTCNT_D:		.word	0x5A00
 	.align	2
 
-BBG_PMMR_A:				.long	0xFF800010
-BBG_PMSR1_A:			.long	0xFF800014
-BBG_PMSR2_A:			.long	0xFF800018
-BBG_PMSR3_A:			.long	0xFF80001C
-BBG_PMSR4_A:			.long	0xFF800020
-BBG_PMSRG_A:			.long	0xFF800024
-
-BBG_PMMR_D_PMSR1:       .long	0xffffbffd
-BBG_PMSR1_D:            .long	0x00004002
-BBG_PMMR_D_PMSR2:       .long	0xfc21a7ff
-BBG_PMSR2_D:            .long	0x03de5800
-BBG_PMMR_D_PMSR3:       .long	0xfffffff8
-BBG_PMSR3_D:            .long	0x00000007
-BBG_PMMR_D_PMSR4:       .long	0xdffdfff9
-BBG_PMSR4_D:            .long	0x20020006
-BBG_PMMR_D_PMSRG:       .long	0xffffffff
-BBG_PMSRG_D:            .long	0x00000000
-
-FRQCR_A:				.long	FRQCR
-DLLCSR_A:				.long	0xffc40010
-FRQCR_D:				.long	0x40233035
-DLLCSR_D:				.long	0x00000000
+BBG_PMMR_A:		.long	0xFF800010
+BBG_PMSR1_A:		.long	0xFF800014
+BBG_PMSR2_A:		.long	0xFF800018
+BBG_PMSR3_A:		.long	0xFF80001C
+BBG_PMSR4_A:		.long	0xFF800020
+BBG_PMSRG_A:		.long	0xFF800024
+
+BBG_PMMR_D_PMSR1:	.long	0xffffbffd
+BBG_PMSR1_D:		.long	0x00004002
+BBG_PMMR_D_PMSR2:	.long	0xfc21a7ff
+BBG_PMSR2_D:		.long	0x03de5800
+BBG_PMMR_D_PMSR3:	.long	0xfffffff8
+BBG_PMSR3_D:		.long	0x00000007
+BBG_PMMR_D_PMSR4:	.long	0xdffdfff9
+BBG_PMSR4_D:		.long	0x20020006
+BBG_PMMR_D_PMSRG:	.long	0xffffffff
+BBG_PMSRG_D:		.long	0x00000000
+
+FRQCR_A:		.long	FRQCR
+DLLCSR_A:		.long	0xffc40010
+FRQCR_D:		.long	0x40233035
+DLLCSR_D:		.long	0x00000000
 
 /* for DDR-SDRAM */
-MIM_U_A:				.long	MIM_1
-MIM_L_A:				.long	MIM_2
-SCR_U_A:				.long	SCR_1
-SCR_L_A:				.long	SCR_2
-STR_U_A:				.long	STR_1
-STR_L_A:				.long	STR_2
-SDR_U_A:				.long	SDR_1
-SDR_L_A:				.long	SDR_2
-
-EMRS_A:					.long	0xFEC02000
-MRS1_A:					.long	0xFEC00B08
-MRS2_A:					.long	0xFEC00308
-
-MIM_U_D:				.long	0x00004000
-MIM_L_D0:				.long	0x03e80009
-MIM_L_D1:				.long	0x03e80209
-SCR_L_D0:				.long	0x3
-SCR_L_D1:				.long	0x2
-SCR_L_D2:				.long	0x2
-SCR_L_D3:				.long	0x4
-SCR_L_D4:				.long	0x4
-SCR_L_D5:				.long	0x0
-STR_L_D:				.long	0x000f0000
-SDR_L_D:				.long	0x00000400
-EMRS_D:					.long	0x0
-MRS1_D:					.long	0x0
-MRS2_D:					.long	0x0
+MIM_U_A:		.long	MIM_1
+MIM_L_A:		.long	MIM_2
+SCR_U_A:		.long	SCR_1
+SCR_L_A:		.long	SCR_2
+STR_U_A:		.long	STR_1
+STR_L_A:		.long	STR_2
+SDR_U_A:		.long	SDR_1
+SDR_L_A:		.long	SDR_2
+
+EMRS_A:			.long	0xFEC02000
+MRS1_A:			.long	0xFEC00B08
+MRS2_A:			.long	0xFEC00308
+
+MIM_U_D:		.long	0x00004000
+MIM_L_D0:		.long	0x03e80009
+MIM_L_D1:		.long	0x03e80209
+SCR_L_D0:		.long	0x3
+SCR_L_D1:		.long	0x2
+SCR_L_D2:		.long	0x2
+SCR_L_D3:		.long	0x4
+SCR_L_D4:		.long	0x4
+SCR_L_D5:		.long	0x0
+STR_L_D:		.long	0x000f0000
+SDR_L_D:		.long	0x00000400
+EMRS_D:			.long	0x0
+MRS1_D:			.long	0x0
+MRS2_D:			.long	0x0
 
 /* Cache Controller */
-CCR_A:		.long	CCR
-MMUCR_A:	.long	MMUCR
-RWTCNT_A:	.long	WTCNT
+CCR_A:			.long	CCR
+MMUCR_A:		.long	MMUCR
+RWTCNT_A:		.long	WTCNT
 
-CCR_D:		.long	0x0000090b
-CCR_D_2:	.long	0x00000103
-MMUCR_D:	.long	0x00000004
-MSTPCR0_D:	.long	0x00001001
-MSTPCR2_D:	.long	0xffffffff
+CCR_D:			.long	0x0000090b
+CCR_D_2:		.long	0x00000103
+MMUCR_D:		.long	0x00000004
+MSTPCR0_D:		.long	0x00001001
+MSTPCR2_D:		.long	0xffffffff
 
 /* local Bus State Controller */
-MMSELR_A:   .long   MMSELR
-BCR_A:      .long   BCR
-CS0BCR_A:   .long   CS0BCR
-CS1BCR_A:   .long   CS1BCR
-CS2BCR_A:   .long   CS2BCR
-CS4BCR_A:   .long   CS4BCR
-CS5BCR_A:   .long   CS5BCR
-CS6BCR_A:   .long   CS6BCR
-CS0WCR_A:   .long   CS0WCR
-CS1WCR_A:   .long   CS1WCR
-CS2WCR_A:   .long   CS2WCR
-CS4WCR_A:   .long   CS4WCR
-CS5WCR_A:   .long   CS5WCR
-CS6WCR_A:   .long   CS6WCR
-CS5PCR_A:   .long   CS5PCR
-CS6PCR_A:   .long   CS6PCR
+MMSELR_A:		.long	MMSELR
+BCR_A:			.long	BCR
+CS0BCR_A:		.long	CS0BCR
+CS1BCR_A:		.long	CS1BCR
+CS2BCR_A:		.long	CS2BCR
+CS4BCR_A:		.long	CS4BCR
+CS5BCR_A:		.long	CS5BCR
+CS6BCR_A:		.long	CS6BCR
+CS0WCR_A:		.long	CS0WCR
+CS1WCR_A:		.long	CS1WCR
+CS2WCR_A:		.long	CS2WCR
+CS4WCR_A:		.long	CS4WCR
+CS5WCR_A:		.long	CS5WCR
+CS6WCR_A:		.long	CS6WCR
+CS5PCR_A:		.long	CS5PCR
+CS6PCR_A:		.long	CS6PCR
 
 MMSELR_D:		.long	0xA5A50003
 BCR_D:			.long	0x00000000
@@ -425,5 +367,5 @@ CS6WCR_D:		.long	0x77777703
 CS5PCR_D:		.long	0x77000000
 CS6PCR_D:		.long	0x77000000
 
-REPEAT0_R3:	.long   0x00002000
-REPEAT0_R1:	.long   0x0000200
+REPEAT0_R3:		.long	0x00002000
+REPEAT0_R1:		.long	0x0000200

board/renesas/rsk7203/Makefile

@@ -26,6 +26,10 @@ LIB	= lib$(BOARD).a
 OBJS	:= rsk7203.o
 SOBJS	:= lowlevel_init.o
 
+LIB	:= $(addprefix $(obj),$(LIB))
+OBJS	:= $(addprefix $(obj),$(OBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
 $(LIB):	$(obj).depend $(OBJS) $(SOBJS)
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 

board/renesas/rsk7203/lowlevel_init.S

@@ -21,6 +21,7 @@
 #include <version.h>
 
 #include <asm/processor.h>
+#include <asm/macro.h>
 
 	.global	lowlevel_init
 
@@ -29,153 +30,89 @@
 
 lowlevel_init:
 	/* Cache setting */
-	mov.l CCR1_A ,r1
-	mov.l CCR1_D ,r0
-	mov.l r0,@r1
+	write32	CCR1_A ,CCR1_D
 
 	/* ConfigurePortPins */
-	mov.l PECRL3_A, r1
-	mov.l PECRL3_D, r0
-	mov.w r0,@r1
+	write16	PECRL3_A, PECRL3_D
 
-	mov.l PCCRL4_A, r1
-	mov.l PCCRL4_D0, r0
-	mov.w r0,@r1
+	write16	PCCRL4_A, PCCRL4_D0
 
-	mov.l PECRL4_A, r1
-	mov.l PECRL4_D0, r0
-	mov.w r0,@r1
+	write16	PECRL4_A, PECRL4_D0
 
-	mov.l PEIORL_A, r1
-	mov.l PEIORL_D0, r0
-	mov.w r0,@r1
+	write16	PEIORL_A, PEIORL_D0
 
-	mov.l PCIORL_A, r1
-	mov.l PCIORL_D, r0
-	mov.w r0,@r1
+	write16	PCIORL_A, PCIORL_D
 
-	mov.l PFCRH2_A, r1
-	mov.l PFCRH2_D, r0
-	mov.w r0,@r1
+	write16	PFCRH2_A, PFCRH2_D
 
-	mov.l PFCRH3_A, r1
-	mov.l PFCRH3_D, r0
-	mov.w r0,@r1
+	write16	PFCRH3_A, PFCRH3_D
 
-	mov.l PFCRH1_A, r1
-	mov.l PFCRH1_D, r0
-	mov.w r0,@r1
+	write16	PFCRH1_A, PFCRH1_D
 
-	mov.l PFIORH_A, r1
-	mov.l PFIORH_D, r0
-	mov.w r0,@r1
+	write16	PFIORH_A, PFIORH_D
 
-	mov.l PECRL1_A, r1
-	mov.l PECRL1_D0, r0
-	mov.w r0,@r1
+	write16	PECRL1_A, PECRL1_D0
 
-	mov.l PEIORL_A, r1
-	mov.l PEIORL_D1, r0
-	mov.w r0,@r1
+	write16	PEIORL_A, PEIORL_D1
 
 	/* Configure Operating Frequency */
-	mov.l WTCSR_A ,r1
-	mov.l WTCSR_D0 ,r0
-	mov.w r0,@r1
+	write16	WTCSR_A, WTCSR_D0
 
-	mov.l WTCSR_A ,r1
-	mov.l WTCSR_D1 ,r0
-	mov.w r0,@r1
+	write16	WTCSR_A, WTCSR_D1
 
-	mov.l WTCNT_A ,r1
-	mov.l WTCNT_D ,r0
-	mov.w r0,@r1
+	write16	WTCNT_A, WTCNT_D
 
 	/* Set clock mode*/
-	mov.l FRQCR_A,r1
-	mov.l FRQCR_D,r0
-	mov.w r0,@r1
+	write16	FRQCR_A, FRQCR_D
 
 	/* Configure Bus And Memory */
 init_bsc_cs0:
-	mov.l   PCCRL4_A,r1
-	mov.l   PCCRL4_D1,r0
-	mov.w   r0,@r1
+	write16	PCCRL4_A, PCCRL4_D1
 
-	mov.l   PECRL1_A,r1
-	mov.l   PECRL1_D1,r0
-	mov.w   r0,@r1
+	write16	PECRL1_A, PECRL1_D1
 
-	mov.l CMNCR_A,r1
-	mov.l CMNCR_D,r0
-	mov.l r0,@r1
+	write32	CMNCR_A, CMNCR_D
 
-	mov.l SC0BCR_A,r1
-	mov.l SC0BCR_D,r0
-	mov.l r0,@r1
+	write32	SC0BCR_A, SC0BCR_D
 
-	mov.l CS0WCR_A,r1
-	mov.l CS0WCR_D,r0
-	mov.l r0,@r1
+	write32	CS0WCR_A, CS0WCR_D
 
 init_bsc_cs1:
-	mov.l   PECRL4_A,r1
-	mov.l   PECRL4_D1,r0
-	mov.w   r0,@r1
+	write16	PECRL4_A, PECRL4_D1
 
-	mov.l CS1WCR_A,r1
-	mov.l CS1WCR_D,r0
-	mov.l r0,@r1
+	write32	CS1WCR_A, CS1WCR_D
 
 init_sdram:
-	mov.l	PCCRL2_A,r1
-	mov.l	PCCRL2_D,r0
-	mov.w	r0,@r1
+	write16	PCCRL2_A, PCCRL2_D
 
-	mov.l	PCCRL4_A,r1
-	mov.l	PCCRL4_D2,r0
-	mov.w   r0,@r1
+	write16	PCCRL4_A, PCCRL4_D2
 
-	mov.l   PCCRL1_A,r1
-	mov.l	PCCRL1_D,r0
-	mov.w   r0,@r1
+	write16	PCCRL1_A, PCCRL1_D
 
-	mov.l   PCCRL3_A,r1
-	mov.l	PCCRL3_D,r0
-	mov.w   r0,@r1
+	write16	PCCRL3_A, PCCRL3_D
 
-	mov.l CS3BCR_A,r1
-	mov.l CS3BCR_D,r0
-	mov.l r0,@r1
+	write32	CS3BCR_A, CS3BCR_D
 
-	mov.l CS3WCR_A,r1
-	mov.l CS3WCR_D,r0
-	mov.l r0,@r1
+	write32	CS3WCR_A, CS3WCR_D
 
-	mov.l SDCR_A,r1
-	mov.l SDCR_D,r0
-	mov.l r0,@r1
+	write32	SDCR_A, SDCR_D
 
-	mov.l RTCOR_A,r1
-	mov.l RTCOR_D,r0
-	mov.l r0,@r1
+	write32	RTCOR_A, RTCOR_D
 
-	mov.l RTCSR_A,r1
-	mov.l RTCSR_D,r0
-	mov.l r0,@r1
+	write32	RTCSR_A, RTCSR_D
 
 	/* wait 200us */
-	mov.l   REPEAT_D,r3
-	mov     #0,r2
+	mov.l	REPEAT_D, r3
+	mov	#0, r2
 repeat0:
-	add     #1,r2
-	cmp/hs  r3,r2
-	bf      repeat0
+	add	#1, r2
+	cmp/hs	r3, r2
+	bf	repeat0
 	nop
 
-	mov.l SDRAM_MODE, r1
-	mov   #0,r0
-	mov.l r0, @r1
+	mov.l	SDRAM_MODE, r1
+	mov	#0, r0
+	mov.l	r0, @r1
 
 	nop
 	rts
@@ -208,8 +145,8 @@ PECRL1_D0:	.long 0x00000033
 
 
 WTCSR_A:	.long 0xFFFE0000
-WTCSR_D0: 	.long 0x0000A518
-WTCSR_D1: 	.long 0x0000A51D
+WTCSR_D0:	.long 0x0000A518
+WTCSR_D1:	.long 0x0000A51D
 WTCNT_A:	.long 0xFFFE0002
 WTCNT_D:	.long 0x00005A84
 FRQCR_A:	.long 0xFFFE0010
@@ -259,7 +196,7 @@ STBCR4_A:	.long 0xFFFE040C
 STBCR4_D:	.long 0x00000008
 STBCR5_A:	.long 0xFFFE0410
 STBCR5_D:	.long 0x00000000
-STBCR6_A: 	.long 0xFFFE0414
+STBCR6_A:	.long 0xFFFE0414
 STBCR6_D:	.long 0x00000002
 SDRAM_MODE:	.long 0xFFFC5040
 REPEAT_D:	.long 0x00009C40

board/renesas/sh7763rdp/lowlevel_init.S

@@ -25,6 +25,7 @@
 #include <version.h>
 
 #include <asm/processor.h>
+#include <asm/macro.h>
 
 	.global	lowlevel_init
 
@@ -33,218 +34,141 @@
 
 lowlevel_init:
 
-	mov.l   WDTCSR_A, r1	/* Watchdog Control / Status Register */
-	mov.l   WDTCSR_D, r0
-	mov.l   r0, @r1
+	write32	WDTCSR_A, WDTCSR_D	/* Watchdog Control / Status Register */
 
-	mov.l   WDTST_A, r1		/* Watchdog Stop Time Register */
-	mov.l   WDTST_D, r0
-	mov.l   r0, @r1
+	write32	WDTST_A, WDTST_D	/* Watchdog Stop Time Register */
 
-	mov.l   WDTBST_A, r1	/* 0xFFCC0008 (Watchdog Base Stop Time Register */
-	mov.l   WDTBST_D, r0
-	mov.l   r0, @r1
+	write32	WDTBST_A, WDTBST_D	/*
+					 * 0xFFCC0008
+					 * Watchdog Base Stop Time Register
+					 */
 
-	mov.l	CCR_A, r1		/* Address of Cache Control Register */
-	mov.l	CCR_CACHE_ICI_D, r0	/* Instruction Cache Invalidate */
-	mov.l	r0, @r1
+	write32	CCR_A, CCR_CACHE_ICI_D	/* Address of Cache Control Register */
+					/* Instruction Cache Invalidate */
 
-	mov.l	MMUCR_A, r1		/* Address of MMU Control Register */
-	mov.l	MMU_CONTROL_TI_D, r0	/* TI == TLB Invalidate bit */
-	mov.l	r0, @r1
+	write32	MMUCR_A, MMU_CONTROL_TI_D	/* MMU Control Register */
+						/* TI == TLB Invalidate bit */
 
-	mov.l	MSTPCR0_A, r1	/* Address of Power Control Register 0 */
-	mov.l	MSTPCR0_D, r0
-	mov.l	r0, @r1
+	write32	MSTPCR0_A, MSTPCR0_D	/* Address of Power Control Register 0 */
 
-	mov.l	MSTPCR1_A, r1	/*i Address of Power Control Register 1 */
-	mov.l	MSTPCR1_D, r0
-	mov.l	r0, @r1
+	write32	MSTPCR1_A, MSTPCR1_D	/* Address of Power Control Register 1 */
 
-	mov.l	RAMCR_A,r1
-	mov.l	RAMCR_D,r0
-	mov.l	r0, @r1
+	write32	RAMCR_A, RAMCR_D
 
-	mov.l	MMSELR_A,r1
-	mov.l	MMSELR_D,r0
+	mov.l	MMSELR_A, r1
+	mov.l	MMSELR_D, r0
 	synco
 	mov.l	r0, @r1
 
-	mov.l	@r1,r2		/* execute two reads after setting MMSELR*/
-	mov.l	@r1,r2
+	mov.l	@r1, r2		/* execute two reads after setting MMSELR */
+	mov.l	@r1, r2
 	synco
 
 	/* issue memory read */
-	mov.l   DDRSD_START_A,r1	/* memory address to read*/
-	mov.l   @r1,r0
+	mov.l	DDRSD_START_A, r1	/* memory address to read*/
+	mov.l	@r1, r0
 	synco
 
-	mov.l	MIM8_A,r1
-	mov.l	MIM8_D,r0
-	mov.l	r0,@r1
+	write32	MIM8_A, MIM8_D
 
-	mov.l	MIMC_A,r1
-	mov.l	MIMC_D1,r0
-	mov.l	r0,@r1
+	write32	MIMC_A, MIMC_D1
 
-	mov.l	STRC_A,r1
-	mov.l	STRC_D,r0
-	mov.l	r0,@r1
+	write32	STRC_A, STRC_D
 
-	mov.l	SDR4_A,r1
-	mov.l	SDR4_D,r0
-	mov.l	r0,@r1
+	write32	SDR4_A, SDR4_D
 
-	mov.l	MIMC_A,r1
-	mov.l	MIMC_D2,r0
-	mov.l	r0,@r1
+	write32	MIMC_A, MIMC_D2
 
 	nop
 	nop
 	nop
 
-	mov.l	SCR4_A,r1
-	mov.l	SCR4_D3,r0
-	mov.l	r0,@r1
+	write32	SCR4_A, SCR4_D3
 
-	mov.l	SCR4_A,r1
-	mov.l	SCR4_D2,r0
-	mov.l	r0,@r1
+	write32	SCR4_A, SCR4_D2
 
-	mov.l	SDMR02000_A,r1
-	mov.l	SDMR02000_D,r0
-	mov.l	r0,@r1
+	write32	SDMR02000_A, SDMR02000_D
 
-	mov.l	SDMR00B08_A,r1
-	mov.l	SDMR00B08_D,r0
-	mov.l	r0,@r1
+	write32	SDMR00B08_A, SDMR00B08_D
 
-	mov.l	SCR4_A,r1
-	mov.l	SCR4_D2,r0
-	mov.l	r0,@r1
+	write32	SCR4_A, SCR4_D2
 
-	mov.l	SCR4_A,r1
-	mov.l	SCR4_D4,r0
-	mov.l	r0,@r1
+	write32	SCR4_A, SCR4_D4
 
 	nop
 	nop
 	nop
 	nop
 
-	mov.l	SCR4_A,r1
-	mov.l	SCR4_D4,r0
-	mov.l	r0,@r1
+	write32	SCR4_A, SCR4_D4
 
 	nop
 	nop
 	nop
 	nop
 
-	mov.l	SDMR00308_A,r1
-	mov.l	SDMR00308_D,r0
-	mov.l	r0,@r1
+	write32	SDMR00308_A, SDMR00308_D
 
-	mov.l	MIMC_A,r1
-	mov.l	MIMC_D3,r0
-	mov.l	r0,@r1
+	write32	MIMC_A, MIMC_D3
 
-	mov.l	SCR4_A,r1
-	mov.l	SCR4_D1,r0
-	mov.l	DELAY60_D,r3
+	mov.l	SCR4_A, r1
+	mov.l	SCR4_D1, r0
+	mov.l	DELAY60_D, r3
 
 delay_loop_60:
-	mov.l	r0,@r1
+	mov.l	r0, @r1
 	dt	r3
 	bf	delay_loop_60
 	nop
 
-	mov.l   CCR_A, r1	/* Address of Cache Control Register */
-	mov.l   CCR_CACHE_D_2, r0
-	mov.l   r0, @r1
+	write32	CCR_A, CCR_CACHE_D_2	/* Address of Cache Control Register */
 
 bsc_init:
-	mov.l	BCR_A, r1
-	mov.l	BCR_D, r0
-	mov.l	r0, @r1
+	write32	BCR_A, BCR_D
 
-	mov.l	CS0BCR_A, r1
-	mov.l	CS0BCR_D, r0
-	mov.l	r0, @r1
+	write32	CS0BCR_A, CS0BCR_D
 
-	mov.l	CS1BCR_A,r1
-	mov.l	CS1BCR_D,r0
-	mov.l	r0,@r1
+	write32	CS1BCR_A, CS1BCR_D
 
-	mov.l	CS2BCR_A, r1
-	mov.l	CS2BCR_D, r0
-	mov.l	r0, @r1
+	write32	CS2BCR_A, CS2BCR_D
 
-	mov.l	CS4BCR_A, r1
-	mov.l	CS4BCR_D, r0
-	mov.l	r0, @r1
+	write32	CS4BCR_A, CS4BCR_D
 
-	mov.l	CS5BCR_A, r1
-	mov.l	CS5BCR_D, r0
-	mov.l	r0, @r1
+	write32	CS5BCR_A, CS5BCR_D
 
-	mov.l	CS6BCR_A, r1
-	mov.l	CS6BCR_D, r0
-	mov.l	r0, @r1
+	write32	CS6BCR_A, CS6BCR_D
 
-	mov.l	CS0WCR_A, r1
-	mov.l	CS0WCR_D, r0
-	mov.l	r0, @r1
+	write32	CS0WCR_A, CS0WCR_D
 
-	mov.l	CS1WCR_A, r1
-	mov.l	CS1WCR_D, r0
-	mov.l	r0, @r1
+	write32	CS1WCR_A, CS1WCR_D
 
-	mov.l	CS2WCR_A, r1
-	mov.l	CS2WCR_D, r0
-	mov.l	r0, @r1
+	write32	CS2WCR_A, CS2WCR_D
 
-	mov.l	CS4WCR_A, r1
-	mov.l	CS4WCR_D, r0
-	mov.l	r0, @r1
+	write32	CS4WCR_A, CS4WCR_D
 
-	mov.l	CS5WCR_A, r1
-	mov.l	CS5WCR_D, r0
-	mov.l	r0, @r1
+	write32	CS5WCR_A, CS5WCR_D
 
-	mov.l	CS6WCR_A, r1
-	mov.l	CS6WCR_D, r0
-	mov.l	r0, @r1
+	write32	CS6WCR_A, CS6WCR_D
 
-	mov.l	CS5PCR_A, r1
-	mov.l	CS5PCR_D, r0
-	mov.l	r0, @r1
+	write32	CS5PCR_A, CS5PCR_D
 
-	mov.l	CS6PCR_A, r1
-	mov.l	CS6PCR_D, r0
-	mov.l	r0, @r1
+	write32	CS6PCR_A, CS6PCR_D
 
-	mov.l	DELAY200_D,r3
+	mov.l	DELAY200_D, r3
 
 delay_loop_200:
 	dt	r3
 	bf	delay_loop_200
 	nop
 
-	mov.l	PSEL0_A,r1
-	mov.l	PSEL0_D,r0
-	mov.w	r0,@r1
+	write16	PSEL0_A, PSEL0_D
 
-	mov.l	PSEL1_A,r1
-	mov.l	PSEL1_D,r0
-	mov.w	r0,@r1
+	write16	PSEL1_A, PSEL1_D
 
-	mov.l	ICR0_A,r1
-	mov.l	ICR0_D,r0
-	mov.l	r0,@r1
+	write32	ICR0_A, ICR0_D
 
 	stc sr, r0	/* BL bit off(init=ON) */
-	mov.l   SR_MASK_D, r1
+	mov.l	SR_MASK_D, r1
 	and r1, r0
 	ldc r0, sr
 
@@ -321,7 +245,7 @@ CS4BCR_D:	.long	0x77777670
 CS5BCR_D:	.long	0x77777670
 CS6BCR_D:	.long	0x77777670
 CS0WCR_D:	.long	0x7777770F
-CS1WCR_D:	.long   0x22000002
+CS1WCR_D:	.long	0x22000002
 CS2WCR_D:	.long	0x7777770F
 CS4WCR_D:	.long	0x7777770F
 CS5WCR_D:	.long	0x7777770F

board/renesas/sh7785lcr/lowlevel_init.S

@@ -19,33 +19,7 @@
 #include <config.h>
 #include <version.h>
 #include <asm/processor.h>
-
-.macro	write32, addr, data
-	mov.l \addr ,r1
-	mov.l \data ,r0
-	mov.l r0, @r1
-.endm
-
-.macro	write16, addr, data
-	mov.l \addr ,r1
-	mov.l \data ,r0
-	mov.w r0, @r1
-.endm
-
-.macro	write8, addr, data
-	mov.l \addr ,r1
-	mov.l \data ,r0
-	mov.b r0, @r1
-.endm
-
-.macro	wait_timer, time
-	mov.l	\time ,r3
-1:
-	nop
-	tst	r3, r3
-	bf/s	1b
-	dt	r3
-.endm
+#include <asm/macro.h>
 
 #include <asm/processor.h>
 
@@ -305,7 +279,7 @@ CS4WCR_D:	.long	0x00101012
 CS_USB_BCR_D:	.long	0x11111200
 CS_USB_WCR_D:	.long	0x00020004
 
-/* SD setting  : 32bit mode = CS3, 29bit mode = CS6 */
+/* SD setting : 32bit mode = CS3, 29bit mode = CS6 */
 CS_SD_BCR_D:	.long	0x00000300
 CS_SD_WCR_D:	.long	0x00030108
 

board/sandburst/karef/karef.c

@@ -26,6 +26,7 @@
 #include <command.h>
 #include "karef.h"
 #include "karef_version.h"
+#include <timestamp.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <spd_sdram.h>
@@ -299,7 +300,7 @@ int checkboard (void)
 		"Serial Number: %d\n", sernum);
 	printf ("%s\n", KAREF_U_BOOT_REL_STR);
 
-	printf ("Built %s %s by %s\n", __DATE__, __TIME__, BUILDUSER);
+	printf ("Built %s %s by %s\n", U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
 	if (sbcommon_get_master()) {
 		printf("Slot 0 - Master\nSlave board");
 		if (sbcommon_secondary_present())
@@ -366,7 +367,8 @@ int misc_init_r (void)
 	setenv("ubrelver", KAREF_U_BOOT_REL_STR);
 
 	memset(envstr, 0, 255);
-	sprintf (envstr, "Built %s %s by %s", __DATE__, __TIME__, BUILDUSER);
+	sprintf (envstr, "Built %s %s by %s",
+		 U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
 	setenv("bldstr", envstr);
 	saveenv();
 

board/sandburst/metrobox/metrobox.c

@@ -25,6 +25,7 @@
 #include <command.h>
 #include "metrobox.h"
 #include "metrobox_version.h"
+#include <timestamp.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <spd_sdram.h>
@@ -270,7 +271,7 @@ int checkboard (void)
 	printf ("Board: Sandburst Corporation MetroBox Serial Number: %d\n", sernum);
 	printf ("%s\n", METROBOX_U_BOOT_REL_STR);
 
-	printf ("Built %s %s by %s\n", __DATE__, __TIME__, BUILDUSER);
+	printf ("Built %s %s by %s\n", U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
 	if (sbcommon_get_master()) {
 		printf("Slot 0 - Master\nSlave board");
 		if (sbcommon_secondary_present())
@@ -335,7 +336,8 @@ int misc_init_r (void)
 	setenv("ubrelver", METROBOX_U_BOOT_REL_STR);
 
 	memset(envstr, 0, 255);
-	sprintf (envstr, "Built %s %s by %s", __DATE__, __TIME__, BUILDUSER);
+	sprintf (envstr, "Built %s %s by %s",
+		 U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
 	setenv("bldstr", envstr);
 	saveenv();
 

board/sbc8548/sbc8548.c

@@ -36,10 +36,6 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 
 void local_bus_init(void);
@@ -65,13 +61,6 @@ int checkboard (void)
 	 */
 	local_bus_init ();
 
-	/*
-	 * Fix CPU2 errata: A core hang possible while executing a
-	 * msync instruction and a snoopable transaction from an I/O
-	 * master tagged to make quick forward progress is present.
-	 */
-	ecm->eebpcr |= (1 << 16);
-
 	/*
 	 * Hack TSEC 3 and 4 IO voltages.
 	 */
@@ -114,12 +103,6 @@ initdram(int board_type)
 	dram_size = fixed_sdram ();
 #endif
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	/*
 	 * SDRAM Initialization
 	 */
@@ -143,7 +126,7 @@ local_bus_init(void)
 	sys_info_t sysinfo;
 
 	get_sys_info(&sysinfo);
-	clkdiv = (lbc->lcrr & 0x0f) * 2;
+	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	gur->lbiuiplldcr1 = 0x00078080;
@@ -429,7 +412,7 @@ pci_init_board(void)
 		first_free_busno=hose->last_busno+1;
 		printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
 #ifdef CONFIG_PCIX_CHECK
-		if (!(gur->pordevsr & PORDEVSR_PCI)) {
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
 			/* PCI-X init */
 			if (CONFIG_SYS_CLK_FREQ < 66000000)
 				printf("PCI-X will only work at 66 MHz\n");

board/sbc8641d/law.c

@@ -45,14 +45,14 @@
 
 struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
-	SET_LAW(CONFIG_SYS_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
 	SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_PCI1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
 	SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
-	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
+	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);

board/sbc8641d/sbc8641d.c

@@ -247,14 +247,14 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_BUS,
 			       CONFIG_SYS_PCI1_MEM_PHYS,
 			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_BUS,
 			       CONFIG_SYS_PCI1_IO_PHYS,
 			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
@@ -290,14 +290,14 @@ void pci_init_board(void)
 
 	/* outbound memory */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_MEM_BASE,
+		       CONFIG_SYS_PCI2_MEM_BUS,
 		       CONFIG_SYS_PCI2_MEM_PHYS,
 		       CONFIG_SYS_PCI2_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	/* outbound io */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_IO_BASE,
+		       CONFIG_SYS_PCI2_IO_BUS,
 		       CONFIG_SYS_PCI2_IO_PHYS,
 		       CONFIG_SYS_PCI2_IO_SIZE,
 		       PCI_REGION_IO);

board/socrates/socrates.c

@@ -156,7 +156,7 @@ void local_bus_init (void)
 	uint lcrr = CONFIG_SYS_LBC_LCRR;
 
 	get_sys_info (&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	/* Disable PLL bypass for Local Bus Clock >= 66 MHz */

board/socrates/tlb.c

@@ -100,6 +100,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
+#if !defined(CONFIG_SPD_EEPROM)
 	/*
 	 * TLB 7+8:	512M	DDR, cache disabled (needed for memory test)
 	 * 0x00000000  512M	DDR System memory
@@ -114,6 +115,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 8, BOOKE_PAGESZ_256M, 1),
+#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);

board/tqc/tqm85xx/tqm85xx.c

@@ -361,7 +361,7 @@ uint get_lbc_clock (void)
 {
 	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	sys_info_t sys_info;
-	ulong clkdiv = lbc->lcrr & 0x0f;
+	ulong clkdiv = lbc->lcrr & LCRR_CLKDIV;
 
 	get_sys_info (&sys_info);
 
@@ -610,7 +610,7 @@ static inline void init_pci1(void)
 
 		first_free_busno = hose->last_busno + 1;
 #ifdef CONFIG_PCIX_CHECK
-		if (!(gur->pordevsr & PORDEVSR_PCI)) {
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
 			ushort reg16 =
 				PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ |
 				PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;

board/tqc/tqm8xx/tqm8xx.c

@@ -570,17 +570,19 @@ void ide_led (uchar led, uchar status)
 
 #ifdef CONFIG_LCD_INFO
 #include <lcd.h>
+#include <version.h>
+#include <timestamp.h>
 
 void lcd_show_board_info(void)
 {
-	lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, __DATE__, __TIME__);
+	char temp[32];
+
+	lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
 	lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
 	lcd_printf ("    Wolfgang DENK, wd@denx.de\n");
 #ifdef CONFIG_LCD_INFO_BELOW_LOGO
 	lcd_printf ("MPC823 CPU at %s MHz\n",
 		strmhz(temp, gd->cpu_clk));
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
-					info, strlen(info));
 	lcd_printf ("  %ld MB RAM, %ld MB Flash\n",
 		gd->ram_size >> 20,
 		gd->bd->bi_flashsize >> 20 );

board/trab/Makefile

@@ -51,7 +51,8 @@ $(obj)trab_fkt.srec:	$(OBJS_FKT) $(LIB)
 	$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e trab_fkt $^ $(LIB) \
 		-L$(obj)../../examples -lstubs \
 		-L$(obj)../../lib_generic -lgeneric \
-		-L$(gcclibdir) -lgcc
+		$(obj)../../lib_arm/div0.o \
+		$(obj)../../lib_arm/_*.o
 	$(OBJCOPY) -O srec $(<:.o=) $@
 
 $(obj)trab_fkt.bin:	$(obj)trab_fkt.srec

board/trab/memory.c

@@ -184,7 +184,7 @@
  *
  * For other processors, let the compiler generate the best code it can.
  */
-static void move64(unsigned long long *src, unsigned long long *dest)
+static void move64(const unsigned long long *src, unsigned long long *dest)
 {
 #if defined(CONFIG_MPC8260) || defined(CONFIG_MPC824X)
 	asm ("lfd  0, 0(3)\n\t" /* fpr0	  =  *scr	*/
@@ -231,12 +231,12 @@ static int memory_post_dataline(unsigned long long * pmem)
 	int ret = 0;
 
 	for ( i = 0; i < num_patterns; i++) {
-		move64((unsigned long long *)&(pattern[i]), pmem++);
+		move64(&(pattern[i]), pmem++);
 		/*
 		 * Put a different pattern on the data lines: otherwise they
 		 * may float long enough to read back what we wrote.
 		 */
-		move64((unsigned long long *)&otherpattern, pmem--);
+		move64(&otherpattern, pmem--);
 		move64(pmem, &temp64);
 
 #ifdef INJECT_DATA_ERRORS

board/trab/trab_fkt.c

@@ -25,6 +25,7 @@
 
 #include <common.h>
 #include <exports.h>
+#include <timestamp.h>
 #include <s3c2400.h>
 #include "tsc2000.h"
 #include "rs485.h"
@@ -293,10 +294,16 @@ int trab_fkt (int argc, char *argv[])
 	return 1;
 }
 
+void hang (void)
+{
+	puts ("### ERROR ### Please RESET the board ###\n");
+	for (;;);
+}
+
 int do_info (void)
 {
 	printf ("Stand-alone application for TRAB board function test\n");
-	printf ("Built: %s at %s\n", __DATE__ , __TIME__ );
+	printf ("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
 
 	return 0;
 }

board/voiceblue/eeprom.c

@@ -26,6 +26,7 @@
 
 #include <common.h>
 #include <exports.h>
+#include <timestamp.h>
 #include "../drivers/net/smc91111.h"
 
 #define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
@@ -169,7 +170,7 @@ int eeprom(int argc, char *argv[])
 	/* Print help message */
 	if (argv[1][1] == 'h') {
 		printf("VoiceBlue EEPROM writer\n");
-		printf("Built: %s at %s\n", __DATE__ , __TIME__ );
+		printf("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
 		printf("Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
 		return 0;
 	}

board/xilinx/xupv2p/Makefile → board/xes/common/Makefile

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2006
+# (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -23,16 +23,23 @@
 
 include $(TOPDIR)/config.mk
 
-LIB	= $(obj)lib$(BOARD).a
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)board/$(VENDOR)/common)
+endif
 
-COBJS	= $(BOARD).o
+LIB	= $(obj)lib$(VENDOR).a
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
+COBJS-$(CONFIG_FSL_PCI_INIT)	+= fsl_85xx_pci.o
+COBJS-$(CONFIG_MPC8572)		+= fsl_8572_clk.o
+COBJS-$(CONFIG_MPC85xx)		+= fsl_85xx_ddr.o
+COBJS-$(CONFIG_NAND_ACTL)	+= actl_nand.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $^
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
 
 clean:
 	rm -f $(SOBJS) $(OBJS)

board/xes/common/actl_nand.c

@@ -0,0 +1,65 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * This driver support NAND devices which have address lines
+ * connected as ALE and CLE inputs.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void nand_addr_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	ulong IO_ADDR_W;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		IO_ADDR_W = (ulong)this->IO_ADDR_W;
+
+		IO_ADDR_W &= ~(CONFIG_SYS_NAND_ACTL_CLE |
+				CONFIG_SYS_NAND_ACTL_ALE |
+				CONFIG_SYS_NAND_ACTL_NCE);
+		if (ctrl & NAND_CLE)
+			IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_CLE;
+		if (ctrl & NAND_ALE)
+			IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_ALE;
+		if (ctrl & NAND_NCE)
+			IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_NCE;
+
+		this->IO_ADDR_W = (void *)IO_ADDR_W;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	nand->ecc.mode = NAND_ECC_SOFT;
+	nand->cmd_ctrl = nand_addr_hwcontrol;
+	nand->chip_delay = CONFIG_SYS_NAND_ACTL_DELAY;
+
+	return 0;
+}

board/xilinx/xupv2p/xupv2p.c → board/xes/common/fsl_8572_clk.c

@@ -1,7 +1,5 @@
 /*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal  SIMEK <monstr@monstr.eu>
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -22,28 +20,32 @@
  * MA 02111-1307 USA
  */
 
-/* This is a board specific file.  It's OK to include board specific
- * header files */
-
 #include <common.h>
-#include <config.h>
 
-void do_reset (void)
+/*
+ * Return SYSCLK input frequency - 50 MHz or 66 MHz depending on POR config
+ */
+unsigned long get_board_sys_clk(ulong dummy)
 {
-#ifdef CONFIG_SYS_GPIO_0
-	*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) =
-	    ++(*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)));
-#endif
-#ifdef CONFIG_SYS_RESET_ADDRESS
-	puts ("Reseting board\n");
-	asm ("bra r0");
-#endif
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 gpporcr = gur->gpporcr;
+
+	if (gpporcr & 0x10000)
+		return 66666666;
+	else
+		return 50000000;
 }
 
-int gpio_init (void)
+/*
+ * Return DDR input clock - synchronous with SYSCLK or 66 MHz
+ */
+unsigned long get_board_ddr_clk(ulong dummy)
 {
-#ifdef CONFIG_SYS_GPIO_0
-	*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = 0x0;
-#endif
-	return 0;
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+
+	if (ddr_ratio == 0x7)
+		return get_board_sys_clk(dummy);
+
+	return 66666666;
 }

board/xes/common/fsl_85xx_ddr.c

@@ -0,0 +1,93 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/mmu.h>
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size = fsl_ddr_sdram();
+
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+
+	dram_size *= 0x100000;
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/* Initialize and enable DDR ECC */
+	ddr_enable_ecc(dram_size);
+#endif
+
+	return dram_size;
+}
+
+#if defined(CONFIG_DDR_ECC) || (CONFIG_NUM_DDR_CONTROLLERS > 1)
+void board_add_ram_info(int use_default)
+{
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
+	volatile ccsr_ddr_t *ddr1 = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+#endif
+
+	puts(" (");
+
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
+	/* Print interleaving information */
+	if (ddr1->cs0_config & 0x20000000) {
+		switch ((ddr1->cs0_config >> 24) & 0xf) {
+		case 0:
+			puts("cache line");
+			break;
+		case 1:
+			puts("page");
+			break;
+		case 2:
+			puts("bank");
+			break;
+		case 3:
+			puts("super-bank");
+			break;
+		default:
+			puts("invalid");
+			break;
+		}
+	} else {
+		puts("no");
+	}
+
+	puts(" interleaving");
+#endif
+
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1) && defined(CONFIG_DDR_ECC)
+	puts(", ");
+#endif
+
+#if defined(CONFIG_DDR_ECC)
+	puts("ECC enabled");
+#endif
+
+	puts(")");
+}
+#endif /* CONFIG_DDR_ECC || CONFIG_NUM_DDR_CONTROLLERS > 1 */

board/xes/common/fsl_85xx_pci.c

@@ -0,0 +1,379 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_config_unlock(struct pci_controller *hose);
+extern void fsl_pci_init(struct pci_controller *hose);
+
+int first_free_busno = 0;
+
+#ifdef CONFIG_PCI1
+static struct pci_controller pci1_hose;
+#endif
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif
+#ifdef CONFIG_PCIE3
+static struct pci_controller pcie3_hose;
+#endif
+
+#ifdef CONFIG_MPC8572
+/* Correlate host/agent POR bits to usable info. Table 4-14 */
+struct host_agent_cfg_t {
+	uchar pcie_root[3];
+	uchar rio_host;
+} host_agent_cfg[8] = {
+	{{0, 0, 0}, 0},
+	{{0, 1, 1}, 1},
+	{{1, 0, 1}, 0},
+	{{1, 1, 0}, 1},
+	{{0, 0, 1}, 0},
+	{{0, 1, 0}, 1},
+	{{1, 0, 0}, 0},
+	{{1, 1, 1}, 1}
+};
+
+/* Correlate port width POR bits to usable info. Table 4-15 */
+struct io_port_cfg_t {
+	uchar pcie_width[3];
+	uchar rio_width;
+} io_port_cfg[16] = {
+	{{0, 0, 0}, 0},
+	{{0, 0, 0}, 0},
+	{{4, 0, 0}, 0},
+	{{4, 4, 0}, 0},
+	{{0, 0, 0}, 0},
+	{{0, 0, 0}, 0},
+	{{0, 0, 0}, 4},
+	{{4, 2, 2}, 0},
+	{{0, 0, 0}, 0},
+	{{0, 0, 0}, 0},
+	{{0, 0, 0}, 0},
+	{{4, 0, 0}, 4},
+	{{4, 0, 0}, 4},
+	{{0, 0, 0}, 4},
+	{{0, 0, 0}, 4},
+	{{8, 0, 0}, 0},
+};
+#elif defined CONFIG_MPC8548
+/* Correlate host/agent POR bits to usable info. Table 4-12 */
+struct host_agent_cfg_t {
+	uchar pci_host[2];
+	uchar pcie_root[1];
+	uchar rio_host;
+} host_agent_cfg[8] = {
+	{{1, 1}, {0}, 0},
+	{{1, 1}, {1}, 0},
+	{{1, 1}, {0}, 1},
+	{{0, 0}, {0}, 0}, /* reserved */
+	{{0, 1}, {1}, 0},
+	{{1, 1}, {1}, 0},
+	{{0, 1}, {1}, 1},
+	{{1, 1}, {1}, 1}
+};
+
+/* Correlate port width POR bits to usable info. Table 4-13 */
+struct io_port_cfg_t {
+	uchar pcie_width[1];
+	uchar rio_width;
+} io_port_cfg[8] = {
+	{{0}, 0},
+	{{0}, 0},
+	{{0}, 0},
+	{{4}, 4},
+	{{4}, 4},
+	{{0}, 4},
+	{{0}, 4},
+	{{8}, 0},
+};
+#endif
+
+void pci_init_board(void)
+{
+	struct pci_controller *hose;
+	volatile ccsr_fsl_pci_t *pci;
+	int width;
+	int host;
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	uint devdisr = gur->devdisr;
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+	struct pci_region *r;
+
+#ifdef CONFIG_PCI1
+	uint pci_spd_norm = (gur->pordevsr & MPC85xx_PORDEVSR_PCI1_SPD);
+	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
+	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+	uint pcix = gur->pordevsr & MPC85xx_PORDEVSR_PCI1;
+	uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000;
+
+	width = 0; /* Silence compiler warning... */
+	io_sel &= 0xf; /* Silence compiler warning... */
+	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
+	hose = &pci1_hose;
+	host = host_agent_cfg[host_agent].pci_host[0];
+	r = hose->regions;
+
+
+	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+		printf("\n    PCI1: %d bit %s, %s %d MHz, %s, %s\n",
+			pci_32 ? 32 : 64,
+			pcix ? "PCIX" : "PCI",
+			pci_spd_norm ?  ">=" : "<=",
+			pcix ? freq * 2 : freq,
+			host ? "host" : "agent",
+			pci_arb ? "arbiter" : "external-arbiter");
+
+		/* inbound */
+		r += fsl_pci_setup_inbound_windows(r);
+
+		/* outbound memory */
+		pci_set_region(r++,
+				CONFIG_SYS_PCI1_MEM_BASE,
+				CONFIG_SYS_PCI1_MEM_PHYS,
+				CONFIG_SYS_PCI1_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(r++,
+				CONFIG_SYS_PCI1_IO_BASE,
+				CONFIG_SYS_PCI1_IO_PHYS,
+				CONFIG_SYS_PCI1_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = r - hose->regions;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+				   (int)&pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		/* Unlock inbound PCI configuration cycles */
+		if (!host)
+			fsl_pci_config_unlock(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf("    PCI1 on bus %02x - %02x\n",
+			hose->first_busno, hose->last_busno);
+	} else {
+		printf("    PCI1: disabled\n");
+	}
+#elif defined CONFIG_MPC8548
+	/* PCI1 not present on MPC8572 */
+	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif
+#ifdef CONFIG_PCIE1
+	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
+	hose = &pcie1_hose;
+	host = host_agent_cfg[host_agent].pcie_root[0];
+	width = io_port_cfg[io_sel].pcie_width[0];
+	r = hose->regions;
+
+	if (width && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
+		printf("\n    PCIE1 connected as %s (x%d)",
+			host ? "Root Complex" : "End Point", width);
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug(" with errors.  Clearing.  Now 0x%08x",
+				pci->pme_msg_det);
+		}
+		printf("\n");
+
+		/* inbound */
+		r += fsl_pci_setup_inbound_windows(r);
+
+		/* outbound memory */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE1_MEM_BASE,
+				CONFIG_SYS_PCIE1_MEM_PHYS,
+				CONFIG_SYS_PCIE1_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE1_IO_BASE,
+				CONFIG_SYS_PCIE1_IO_PHYS,
+				CONFIG_SYS_PCIE1_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = r - hose->regions;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+					(int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		/* Unlock inbound PCI configuration cycles */
+		if (!host)
+			fsl_pci_config_unlock(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf("    PCIE1 on bus %02x - %02x\n",
+				hose->first_busno, hose->last_busno);
+	}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif /* CONFIG_PCIE1 */
+
+#ifdef CONFIG_PCIE2
+	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
+	hose = &pcie2_hose;
+	host = host_agent_cfg[host_agent].pcie_root[1];
+	width = io_port_cfg[io_sel].pcie_width[1];
+	r = hose->regions;
+
+	if (width && !(devdisr & MPC85xx_DEVDISR_PCIE2)) {
+		printf("\n    PCIE2 connected as %s (x%d)",
+			host ? "Root Complex" : "End Point", width);
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug(" with errors.  Clearing.  Now 0x%08x",
+				pci->pme_msg_det);
+		}
+		printf("\n");
+
+		/* inbound */
+		r += fsl_pci_setup_inbound_windows(r);
+
+		/* outbound memory */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE2_MEM_BASE,
+				CONFIG_SYS_PCIE2_MEM_PHYS,
+				CONFIG_SYS_PCIE2_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE2_IO_BASE,
+				CONFIG_SYS_PCIE2_IO_PHYS,
+				CONFIG_SYS_PCIE2_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = r - hose->regions;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+					(int)&pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		/* Unlock inbound PCI configuration cycles */
+		if (!host)
+			fsl_pci_config_unlock(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf("    PCIE2 on bus %02x - %02x\n",
+				hose->first_busno, hose->last_busno);
+	}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
+#endif /* CONFIG_PCIE2 */
+
+#ifdef CONFIG_PCIE3
+	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
+	hose = &pcie3_hose;
+	host = host_agent_cfg[host_agent].pcie_root[2];
+	width = io_port_cfg[io_sel].pcie_width[2];
+	r = hose->regions;
+
+	if (width && !(devdisr & MPC85xx_DEVDISR_PCIE3)) {
+		printf("\n    PCIE3 connected as %s (x%d)",
+			host ? "Root Complex" : "End Point", width);
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug(" with errors.  Clearing.  Now 0x%08x",
+				pci->pme_msg_det);
+		}
+		printf("\n");
+
+		/* inbound */
+		r += fsl_pci_setup_inbound_windows(r);
+
+		/* outbound memory */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE3_MEM_BASE,
+				CONFIG_SYS_PCIE3_MEM_PHYS,
+				CONFIG_SYS_PCIE3_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE3_IO_BASE,
+				CONFIG_SYS_PCIE3_IO_PHYS,
+				CONFIG_SYS_PCIE3_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = r - hose->regions;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+					(int)&pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		/* Unlock inbound PCI configuration cycles */
+		if (!host)
+			fsl_pci_config_unlock(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf("    PCIE3 on bus %02x - %02x\n",
+				hose->first_busno, hose->last_busno);
+	}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
+#endif /* CONFIG_PCIE3 */
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+				struct pci_controller *hose);
+
+void ft_board_pci_setup(void *blob, bd_t *bd)
+{
+	/* TODO - make node name (eg pci0) dynamic */
+#ifdef CONFIG_PCI1
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
+#endif
+#ifdef CONFIG_PCIE1
+	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
+#endif
+#ifdef CONFIG_PCIE2
+	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
+#endif
+#ifdef CONFIG_PCIE3
+	ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
+#endif
+}
+#endif /* CONFIG_OF_BOARD_SETUP */

board/xes/xpedite5200/Makefile

@@ -0,0 +1,55 @@
+#
+# Copyright 2008 Extreme Engineering Solutions, Inc.
+# Copyright 2004 Freescale Semiconductor.
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= ddr.o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
+
+SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS-y))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/xilinx/xupv2p/config.mk → board/xes/xpedite5200/config.mk

@@ -1,7 +1,6 @@
 #
-# (C) Copyright 2007 Michal Simek
-#
-# Michal  SIMEK <monstr@monstr.eu>
+# Copyright 2008 Extreme Engineering Solutions, Inc.
+# Copyright 2004, 2007 Freescale Semiconductor.
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -13,7 +12,7 @@
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
@@ -21,12 +20,15 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-# CAUTION: This file is automatically generated by libgen.
-# Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
-#
 
-TEXT_BASE = 0x38000000
+#
+# xpedite5200 board
+#
+ifndef TEXT_BASE
+TEXT_BASE = 0xfff80000
+endif
 
-PLATFORM_CPPFLAGS += -mno-xl-soft-mul
-PLATFORM_CPPFLAGS += -mno-xl-soft-div
-PLATFORM_CPPFLAGS += -mxl-barrel-shift
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1
+PLATFORM_CPPFLAGS += -mrelocatable

board/xes/xpedite5200/ddr.c

@@ -0,0 +1,91 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+static void
+get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+{
+	i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
+
+	/* We use soldered memory, but use an SPD EEPROM to describe it.
+	 * The SPD has an unspecified dimm type, but the DDR2 initialization
+	 * code requires a specific type to be specified. This sets the type
+	 * as a standard unregistered SO-DIMM. */
+	if (spd->dimm_type == 0) {
+		spd->dimm_type = 0x4;
+		((uchar *)spd)[63] += 0x4;
+	}
+}
+
+unsigned int fsl_ddr_get_mem_data_rate(void)
+{
+	return get_ddr_freq(0);
+}
+
+void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
+			unsigned int ctrl_num)
+{
+	unsigned int i;
+
+	if (ctrl_num) {
+		printf("%s: invalid ctrl_num = %d\n", __func__, ctrl_num);
+		return;
+	}
+
+	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++)
+		get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS);
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	/*
+	 * Factors to consider for clock adjust:
+	 *	- number of chips on bus
+	 *	- position of slot
+	 *	- DDR1 vs. DDR2?
+	 *	- ???
+	 *
+	 * This needs to be determined on a board-by-board basis.
+	 *	0110	3/4 cycle late
+	 *	0111	7/8 cycle late
+	 */
+	popts->clk_adjust = 7;
+
+	/*
+	 * Factors to consider for CPO:
+	 *	- frequency
+	 *	- ddr1 vs. ddr2
+	 */
+	popts->cpo_override = 9;
+
+	/*
+	 * Factors to consider for write data delay:
+	 *	- number of DIMMs
+	 *
+	 * 1 = 1/4 clock delay
+	 * 2 = 1/2 clock delay
+	 * 3 = 3/4 clock delay
+	 * 4 = 1   clock delay
+	 * 5 = 5/4 clock delay
+	 * 6 = 3/2 clock delay
+	 */
+	popts->write_data_delay = 3;
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+}

board/xes/xpedite5200/law.c

@@ -0,0 +1,51 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * Notes:
+ *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+	SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+#if CONFIG_SYS_PCI1_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAWAR_SIZE_8M, LAW_TRGT_IF_PCI_1),
+#endif
+#if CONFIG_SYS_PCI2_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI_2),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);