powerpc/85xx: Add Support for Freescale P1010 Processor

Key Features include of the P1010:
* e500v2 core frequency operation of 500 to 800 MHz
* Power consumption less than 5.0 W at 800 MHz core speed
* Dual SATA 3 Gbps controllers with integrated PHY
* Dual PCI Express controllers
* Three 10/100/1000 Mbps enhanced triple-speed Ethernet controllers (eTSECs)
	* TCP/IP acceleration and classification capabilities
	* IEEE 1588 support
	* Lossless flow control
	* RGMII, SGMII
* DDR3 with support for a 32-bit data interface (40 bits including ECC),
  up to 800 MHz data rate 32/16-bit DDR3 memory controller
* Dedicated security engine featuring trusted boot
* TDM interface
* Dual controller area networks (FlexCAN) controller
* SD/MMC card controller supporting booting from Flash cards
* USB 2.0 host and device controller with an on-chip, high-speed PHY
* Integrated Flash controller (IFC)
* Power Management Controller (PMC)
* Four-channel, general-purpose DMA controller
* I2C controller
* Serial peripheral interface (SPI) controller with master and slave support
* System timers including a periodic interrupt timer, real-time clock,
  software watchdog timer, and four general-purpose timers
* Dual DUARTs

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/cpu/mpc85xx/Makefile

@@ -50,6 +50,7 @@ COBJS-$(CONFIG_MPC8544) += ddr-gen2.o
 COBJS-$(CONFIG_MPC8572) += ddr-gen3.o
 COBJS-$(CONFIG_MPC8536) += ddr-gen3.o
 COBJS-$(CONFIG_MPC8569)	+= ddr-gen3.o
+COBJS-$(CONFIG_P1010)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1011)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1012)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1013)	+= ddr-gen3.o

arch/powerpc/cpu/mpc8xxx/cpu.c

@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
  *
  * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
  * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
@@ -64,6 +64,8 @@ struct cpu_type cpu_type_list [] = {
 	CPU_TYPE_ENTRY(8569, 8569_E, 1),
 	CPU_TYPE_ENTRY(8572, 8572, 2),
 	CPU_TYPE_ENTRY(8572, 8572_E, 2),
+	CPU_TYPE_ENTRY(P1010, P1010, 1),
+	CPU_TYPE_ENTRY(P1010, P1010_E, 1),
 	CPU_TYPE_ENTRY(P1011, P1011, 1),
 	CPU_TYPE_ENTRY(P1011, P1011_E, 1),
 	CPU_TYPE_ENTRY(P1012, P1012, 1),

arch/powerpc/include/asm/config.h

@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -69,14 +69,16 @@
 
 /* Enable TSEC2.0 for the platforms that have it if we are using TSEC */
 #if defined(CONFIG_TSEC_ENET) && \
-    (defined(CONFIG_P1020) || defined(CONFIG_P1011))
+    (defined(CONFIG_P1010) || \
+     defined(CONFIG_P1020) || defined(CONFIG_P1011))
 #define CONFIG_TSECV2
 #endif
 
 /*
  * SEC (crypto unit) major compatible version determination
  */
-#if defined(CONFIG_FSL_CORENET)
+#if defined(CONFIG_FSL_CORENET) || \
+    defined(CONFIG_P1010)
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
 #elif defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx)
 #define CONFIG_SYS_FSL_SEC_COMPAT	2

arch/powerpc/include/asm/processor.h

@@ -1038,6 +1038,8 @@
 #define SVR_8569_E	0x808800
 #define SVR_8572	0x80E000
 #define SVR_8572_E	0x80E800
+#define SVR_P1010	0x80F100
+#define SVR_P1010_E	0x80F900
 #define SVR_P1011	0x80E500
 #define SVR_P1011_E	0x80ED00
 #define SVR_P1012	0x80E501

drivers/misc/fsl_law.c

@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -38,6 +38,7 @@ DECLARE_GLOBAL_DATA_PTR;
       defined(CONFIG_MPC8641) || defined(CONFIG_MPC8610)
 #define FSL_HW_NUM_LAWS 10
 #elif defined(CONFIG_MPC8536) || defined(CONFIG_MPC8572) || \
+      defined(CONFIG_P1010) || \
       defined(CONFIG_P1011) || defined(CONFIG_P1020) || \
       defined(CONFIG_P1012) || defined(CONFIG_P1021) || \
       defined(CONFIG_P1013) || defined(CONFIG_P1022) || \