Code cleanup

Makefile

@@ -100,7 +100,7 @@ LIBS += board/$(BOARDDIR)/lib$(BOARD).a
 LIBS += cpu/$(CPU)/lib$(CPU).a
 LIBS += lib_$(ARCH)/lib$(ARCH).a
 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
-        fs/reiserfs/libreiserfs.a
+	fs/reiserfs/libreiserfs.a
 LIBS += net/libnet.a
 LIBS += disk/libdisk.a
 LIBS += rtc/librtc.a
@@ -976,10 +976,10 @@ omap1610h2_cs0boot_config \
 omap1610h2_cs3boot_config :	unconfig
 	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
 		echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \
-		echo "Configured for CS0 boot"; \
+		echo "... configured for CS0 boot"; \
 	else \
 		echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
-		echo "Configured for CS3 boot"; \
+		echo "... configured for CS3 boot"; \
 	fi;
 	@./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn
 

README

@@ -778,13 +778,13 @@ The following options need to be configured:
 		Enable Chips & Technologies 69000 Video chip
 
 		CONFIG_VIDEO_SMI_LYNXEM
-		Enable Silicon Motion SMI 712/710/810 Video chip. The 
+		Enable Silicon Motion SMI 712/710/810 Video chip. The
 		video output is selected via environment 'videoout'
 		(1 = LCD and 2 = CRT). If videoout is undefined, CRT is
 		assumed.
 
-		For the CT69000 and SMI_LYNXEM drivers, videomode is 
-		selected via environment 'videomode'. Two diferent ways 
+		For the CT69000 and SMI_LYNXEM drivers, videomode is
+		selected via environment 'videomode'. Two diferent ways
 		are possible:
 		- "videomode=num"   'num' is a standard LiLo mode numbers.
 		Following standard modes are supported  (* is default):
@@ -798,7 +798,7 @@ The following options need to be configured:
 		-------------+---------------------------------------------
 		(i.e. setenv videomode 317; saveenv; reset;)
 
-		- "videomode=bootargs" all the video parameters are parsed 
+		- "videomode=bootargs" all the video parameters are parsed
 		from the bootargs. (See drivers/videomodes.c)
 
 

board/eXalion/Makefile

@@ -29,7 +29,7 @@ OBJS	= $(BOARD).o
 SOBJS	=
 
 $(LIB):	.depend $(OBJS) $(SOBJS)
-	$(AR) crv $@ $^
+	$(AR) crv $@ $(OBJS) $(SOBJS)
 
 #########################################################################
 

common/cmd_bdinfo.c

@@ -183,7 +183,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	puts  ( "\n"
 		"ip_addr     = ");
 	print_IPaddr (bd->bi_ip_addr);
-	puts  ( "\n"
+	printf ("\n"
 		"baudrate    = %d bps\n", bd->bi_baudrate);
 
 	return 0;

drivers/smc91111.c

@@ -485,7 +485,7 @@ static int smc_send_packet (volatile void *packet, int packet_length)
 	word saved_ptr;
 
 	/* save PTR and PNR registers before manipulation */
-	SMC_SELECT_BANK (2);	
+	SMC_SELECT_BANK (2);
 	saved_pnr = SMC_inb( PN_REG );
 	saved_ptr = SMC_inw( PTR_REG );
 
@@ -565,8 +565,8 @@ again:
 	/* we have a packet address, so tell the card to use it */
 	SMC_outb (packet_no, PN_REG);
 
-	/* do not write new ptr value if Write data fifo not empty */	
-	while ( saved_ptr & PTR_NOTEMPTY ) 
+	/* do not write new ptr value if Write data fifo not empty */
+	while ( saved_ptr & PTR_NOTEMPTY )
 		printf ("Write data fifo not empty!\n");
 
 	/* point to the beginning of the packet */

drivers/smiLynxEM.c

@@ -148,7 +148,7 @@ static char SMI_PCR [] = {
 	0x20, 0x04, 0x21, 0x30, 0x22, 0x00, 0x23, 0x00, 0x24, 0x00
 };
 static char SMI_MCR[] = {
-	0x60, 0x01, 0x61, 0x00, 
+	0x60, 0x01, 0x61, 0x00,
 };
 
 static char SMI_HCR[] = {
@@ -400,7 +400,7 @@ static void smiLoadCrt (struct ctfb_res_modes *var, int bits_per_pixel)
 	he = (var->xres + var->right_margin + var->hsync_len) / 8;	/* HsEnd   */
 	ht = (var->left_margin + var->xres + var->right_margin + var->hsync_len) / 8;	/* HTotal  */
 	/* Blank */
-	hbs = hd; 
+	hbs = hd;
 	hbe = 0; /* Blank end at 0 */
 
 	/* Vertical */
@@ -410,7 +410,7 @@ static void smiLoadCrt (struct ctfb_res_modes *var, int bits_per_pixel)
 	vt = var->upper_margin + var->yres + var->lower_margin + var->vsync_len;	/* VTotal  */
 	vbs = vd;
 	vbe = 0;
-    
+
 	bpp = bits_per_pixel;
 	dblscan = (var->vmode & FB_VMODE_DOUBLE) ? 1 : 0;
 	interlaced = var->vmode & FB_VMODE_INTERLACED;
@@ -433,7 +433,7 @@ static void smiLoadCrt (struct ctfb_res_modes *var, int bits_per_pixel)
 	cr[0x03] = (hbe & 0x1F);
 	cr[0x04] = hs;
 	cr[0x05] = ((hbe & 0x20) << 2) | (he & 0x1f);
-    
+
 	cr[0x06] = (vt - 2) & 0xFF;
 	cr[0x07] = (((vt - 2) & 0x100) >> 8)
 		| (((vd - 1) & 0x100) >> 7)
@@ -449,7 +449,7 @@ static void smiLoadCrt (struct ctfb_res_modes *var, int bits_per_pixel)
 		| (((vbs - 1) & 0x400) >> 9)
 		| ((vs & 0x400) >> 10)
 		| (interlaced) ? 0x80 : 0;
-    
+
 
 	cr[0x08] = 0x00;
 	cr[0x09] = (dblscan << 7)
@@ -458,7 +458,7 @@ static void smiLoadCrt (struct ctfb_res_modes *var, int bits_per_pixel)
 		| (TextScanLines - 1);
 
 	cr[0x10] = vs & 0xff;	/* VSyncPulseStart */
-	cr[0x11] = (ve & 0x0f);	
+	cr[0x11] = (ve & 0x0f);
 	cr[0x12] = (vd - 1) & 0xff;	/* LineCount  */
 	cr[0x13] = wd & 0xff;
 	cr[0x14] = 0x40;
@@ -494,7 +494,7 @@ static unsigned int FindPQ (unsigned int freq, unsigned int *pp, unsigned int *p
 
 	for (n = QMIN; n <= QMAX; n++) {
 		m = PMIN;	/* p/q ~ freq/ref -> p*ref-freq*q ~ 0 */
-		L = P * n - m * Q;	
+		L = P * n - m * Q;
 		while (L > 0 && m < PMAX) {
 			L -= REF_FREQ;	/* difference is greater as 0 subtract fref */
 			m++;	/* and increment m */
@@ -548,12 +548,12 @@ static void smiLoadCcr (struct ctfb_res_modes *var, unsigned short device_id)
 		break;
 	}
 	smiWrite (SMI_INDX_C4, 0x6b, 0x15);
-    
+
 	/* VCLK */
 	freq = 1000000000000L / var -> pixclock;
-    
+
 	FindPQ ((unsigned int)freq, &p, &q);
-    
+
 	smiWrite (SMI_INDX_C4, 0x6c, p);
 	smiWrite (SMI_INDX_C4, 0x6d, q);
 
@@ -576,7 +576,7 @@ void *video_hw_init (void)
 	struct ctfb_res_modes *res_mode;
 	struct ctfb_res_modes var_mode;
 	unsigned char videoout;
-    
+
 	/* Search for video chip */
 	printf("Video: ");
 
@@ -593,7 +593,7 @@ void *video_hw_init (void)
 	pci_mem_base = pci_mem_to_phys (devbusfn, pci_mem_base);
 
 	tmp = 0;
-    
+
 	videomode = CFG_DEFAULT_VIDEO_MODE;
 	/* get video mode via environment */
 	if ((penv = getenv ("videomode")) != NULL) {
@@ -621,7 +621,7 @@ void *video_hw_init (void)
 								 resindex];
 		bits_per_pixel = vesa_modes[i].bits_per_pixel;
 	} else {
-	
+
 		res_mode = (struct ctfb_res_modes *) &var_mode;
 		bits_per_pixel = video_get_params (res_mode, penv);
 	}
@@ -638,7 +638,7 @@ void *video_hw_init (void)
 		 res_mode->lower_margin + res_mode->vsync_len);
 	t1 /= 1000;
 	vsynch = 1000000000L / t1;
-    
+
 	/* fill in Graphic device struct */
 	sprintf (pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres,
 		 res_mode->yres, bits_per_pixel, (hsynch / 1000),
@@ -696,7 +696,7 @@ void *video_hw_init (void)
 
 	/* Attributes controller registers */
 	smiLoadRegs (SMI_INDX_ATTR, SMI_INDX_ATTR, SMI_ATTR, sizeof(SMI_ATTR));
-    
+
 	/* Graphics Controller Register */
 	smiLoadRegs (SMI_INDX_CE, SMI_DATA_CF, SMI_GCR, sizeof(SMI_GCR));
 
@@ -713,10 +713,10 @@ void *video_hw_init (void)
 
 	/* Set misc output register */
 	smiLoadMsr (res_mode);
-    
+
 	/* Set CRT and Clock control registers */
 	smiLoadCrt (res_mode, bits_per_pixel);
-    
+
 	smiLoadCcr (res_mode, device_id);
 
 	/* Hardware Cusor Register */

drivers/videomodes.c

@@ -206,5 +206,3 @@ int video_get_params (struct ctfb_res_modes *pPar, char *penv)
 	}
 	return bpp;
 }
-
-

drivers/videomodes.h

@@ -86,4 +86,3 @@ extern const struct ctfb_vesa_modes vesa_modes[];
 extern const struct ctfb_res_modes res_mode_init[];
 
 int video_get_params (struct ctfb_res_modes *pPar, char *penv);
-

fs/reiserfs/dev.c

@@ -62,7 +62,7 @@ int reiserfs_devread (int sector, int byte_offset, int byte_len, char *buf)
 	if (sector < 0
 	    || ((sector + ((byte_offset + byte_len - 1) >> SECTOR_BITS))
 	    >= part_info.size)) {
-//		errnum = ERR_OUTSIDE_PART;
+/*		errnum = ERR_OUTSIDE_PART; */
 		printf (" ** reiserfs_devread() read outside partition\n");
 		return 0;
 	}

fs/reiserfs/mode_string.c

@@ -99,7 +99,6 @@ const char *bb_mode_string(int mode)
 
 /* The previous version used "0pcCd?bB-?l?s???".  However, the '0', 'C',
  * and 'B' types don't appear to be available on linux.  So I removed them. */
-//static const char type_chars[16] = "?pc?d?b?-?l?s???";
 static const char type_chars[16] = "?pc?d?b?-?l?s???";
 /*                                  0123456789abcdef */
 static const char mode_chars[7] = "rwxSTst";

fs/reiserfs/reiserfs_private.h

@@ -285,10 +285,10 @@ struct disk_child {
 #define dc_block_number(dc_p)	(__le32_to_cpu((dc_p)->dc_block_number))
 
 
-//
-// old stat data is 32 bytes long. We are going to distinguish new one by
-// different size
-//
+/*
+ * old stat data is 32 bytes long. We are going to distinguish new one by
+ * different size
+ */
 struct stat_data_v1
 {
     __u16 sd_mode;	/* file type, permissions */
@@ -315,7 +315,6 @@ struct stat_data_v1
 } __attribute__ ((__packed__));
 
 #define stat_data_v1(ih)        (ih_version(ih) == ITEM_VERSION_1)
-//#define sd_v1_mode(sdp)         (__le16_to_cpu((sdp)->sd_mode))
 #define sd_v1_mode(sdp)         ((sdp)->sd_mode)
 #define sd_v1_nlink(sdp)        (__le16_to_cpu((sdp)->sd_nlink))
 #define sd_v1_uid(sdp)          (__le16_to_cpu((sdp)->sd_uid))
@@ -339,7 +338,7 @@ struct stat_data {
     union {
 	__u32 sd_rdev;
 	__u32 sd_generation;
-      //__u32 sd_first_direct_byte;
+      /*__u32 sd_first_direct_byte; */
       /* first byte of file which is stored in a
 				       direct item: except that if it equals 1
 				       it is a symlink and if it equals

include/configs/LANTEC.h

@@ -81,7 +81,7 @@
 				 CFG_CMD_MEMORY | \
 				 CFG_CMD_LOADS  | \
 				 CFG_CMD_LOADB)
-#define CONFIG_CMD_NORMAL	(CONFIG_CMD_DFL & ~CFG_CMD_BOOTD)
+#define CONFIG_CMD_NORMAL	(CONFIG_CMD_DFL & ~CFG_CMD_BOOTD & ~CFG_CMD_REISER)
 #define CONFIG_CMD_GDB		(CONFIG_CMD_NORMAL | CFG_CMD_KGDB)
 #define CONFIG_CMD_FULL		(CFG_CMD_ALL & ~CFG_CMD_BEDBUG	\
 					     & ~CFG_CMD_BMP	\
@@ -103,6 +103,7 @@
 					     & ~CFG_CMD_NAND	\
 					     & ~CFG_CMD_PCI	\
 					     & ~CFG_CMD_PCMCIA	\
+					     & ~CFG_CMD_REISER	\
 					     & ~CFG_CMD_SCSI	\
 					     & ~CFG_CMD_SPI	\
 					     & ~CFG_CMD_USB	\

include/configs/MPC8260ADS.h

@@ -170,6 +170,7 @@
 				 CFG_CMD_NAND	| \
 				 CFG_CMD_PCI	| \
 				 CFG_CMD_PCMCIA | \
+				CFG_CMD_REISER	| \
 				 CFG_CMD_SCSI	| \
 				 CFG_CMD_SPI	| \
 				 CFG_CMD_USB	| \

include/configs/MPC8266ADS.h

@@ -164,6 +164,7 @@
 				 CFG_CMD_MMC	| \
 				 CFG_CMD_NAND	| \
 				 CFG_CMD_PCMCIA | \
+				CFG_CMD_REISER	| \
 				 CFG_CMD_SCSI	| \
 				 CFG_CMD_SPI	| \
 				 CFG_CMD_VFD	| \
@@ -172,8 +173,8 @@
 /* Define a command string that is automatically executed when no character
  * is read on the console interface withing "Boot Delay" after reset.
  */
-#define CONFIG_BOOT_ROOT_INITRD 0	/* Use ram disk for the root file system */
-#define CONFIG_BOOT_ROOT_NFS	1	/* Use a NFS mounted root file system */
+#undef	CONFIG_BOOT_ROOT_INITRD 	/* Use ram disk for the root file system */
+#define	CONFIG_BOOT_ROOT_NFS		/* Use a NFS mounted root file system */
 
 #ifdef CONFIG_BOOT_ROOT_INITRD
 #define CONFIG_BOOTCOMMAND \

include/configs/PPChameleonEVB.h

@@ -694,6 +694,4 @@
 
 #endif /* CONFIG_NO_SERIAL_EEPROM */
 
-#define CFG_OPB_FREQ	50000000
-
 #endif	/* __CONFIG_H */

include/configs/RBC823.h

@@ -89,35 +89,32 @@
 #define CONFIG_HARD_I2C
 #define CFG_I2C_SPEED 40000
 #define CFG_I2C_SLAVE 0xfe
-#define CFG_I2C_EEPROM_ADDR       0x50
-#define CFG_I2C_EEPROM_ADDR_LEN   1
-#define CFG_EEPROM_WRITE_BITS        4
-#define CFG_EEPROM_WRITE_DELAY_MS   10
+#define CFG_I2C_EEPROM_ADDR		0x50
+#define CFG_I2C_EEPROM_ADDR_LEN		1
+#define CFG_EEPROM_WRITE_BITS		4
+#define CFG_EEPROM_WRITE_DELAY_MS	10
 
 #define CONFIG_COMMANDS	      ( CFG_CMD_ALL	& \
-				~CFG_CMD_PCMCIA	& \
-				~CFG_CMD_IDE	& \
-				~CFG_CMD_PCI	& \
+				~CFG_CMD_BSP	& \
+				~CFG_CMD_DATE	& \
+				~CFG_CMD_DTT	& \
 				~CFG_CMD_FDC	& \
-				~CFG_CMD_HWFLOW	& \
 				~CFG_CMD_FDOS	& \
-				~CFG_CMD_SCSI	& \
-				~CFG_CMD_SETGETDCR	& \
-				~CFG_CMD_BSP	& \
-				~CFG_CMD_USB	& \
-				~CFG_CMD_VFD	& \
-				~CFG_CMD_SPI	& \
-				/* ~CFG_CMD_I2C	& */ \
+				~CFG_CMD_HWFLOW	& \
+				~CFG_CMD_IDE	& \
 				~CFG_CMD_IRQ	& \
-				~CFG_CMD_NAND	& \
 				~CFG_CMD_JFFS2	& \
-				~CFG_CMD_DTT	& \
 				~CFG_CMD_MII	& \
 				~CFG_CMD_MMC	& \
-				/*~CFG_CMD_NET	&*/ \
-				/*~CFG_CMD_ELF	&*/ \
-				/* ~CFG_CMD_EEPROM	& */ \
-				~CFG_CMD_DATE	)
+				~CFG_CMD_NAND	& \
+				~CFG_CMD_PCI	& \
+				~CFG_CMD_PCMCIA	& \
+				~CFG_CMD_REISER	& \
+				~CFG_CMD_SCSI	& \
+				~CFG_CMD_SETGETDCR	& \
+				~CFG_CMD_SPI	& \
+				~CFG_CMD_USB	& \
+				~CFG_CMD_VFD	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>

include/configs/TOP5200.h

@@ -123,7 +123,7 @@
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
 				ADD_PCI_CMD	| \
 				ADD_USB_CMD	| \
-				ADD_IDE_CMD | \
+				ADD_IDE_CMD	| \
 				CFG_CMD_ASKENV	| \
 				CFG_CMD_DATE	| \
 				CFG_CMD_DHCP	| \

include/configs/ZPC1900.h

@@ -130,6 +130,7 @@
 				 CFG_CMD_NAND	| \
 				 CFG_CMD_PCI	| \
 				 CFG_CMD_PCMCIA | \
+				 CFG_CMD_REISER	| \
 				 CFG_CMD_SCSI	| \
 				 CFG_CMD_SPI	| \
 				 CFG_CMD_USB	| \

include/configs/ep8260.h

@@ -288,6 +288,7 @@
 					~CFG_CMD_PCI    & \
 					~CFG_CMD_PCMCIA & \
 					~CFG_CMD_SCSI   & \
+					~CFG_CMD_REISER	& \
 					~CFG_CMD_SPI	& \
 					~CFG_CMD_USB	& \
 					~CFG_CMD_VFD	& \

include/configs/hymod.h

@@ -188,6 +188,7 @@
 					CFG_CMD_PCMCIA	| \
 					CFG_CMD_PCI	| \
 					CFG_CMD_USB	| \
+					CFG_CMD_REISER	| \
 					CFG_CMD_SCSI	| \
 					CFG_CMD_SPI	| \
 					CFG_CMD_VFD	) )

include/configs/ppmc8260.h

@@ -238,8 +238,8 @@
 /* Define a command string that is automatically executed when no character
  * is read on the console interface withing "Boot Delay" after reset.
  */
-#define CONFIG_BOOT_ROOT_INITRD 0	/* Use ram disk for the root file system */
-#define CONFIG_BOOT_ROOT_NFS	1	/* Use a NFS mounted root file system */
+#undef	CONFIG_BOOT_ROOT_INITRD 	/* Use ram disk for the root file system */
+#define	CONFIG_BOOT_ROOT_NFS		/* Use a NFS mounted root file system */
 
 #ifdef CONFIG_BOOT_ROOT_INITRD
 #define CONFIG_BOOTCOMMAND \

include/configs/sacsng.h

@@ -443,8 +443,8 @@
 /* Define a command string that is automatically executed when no character
  * is read on the console interface withing "Boot Delay" after reset.
  */
-#define CONFIG_BOOT_ROOT_INITRD 0	/* Use ram disk for the root file system */
-#define CONFIG_BOOT_ROOT_NFS	1	/* Use a NFS mounted root file system */
+#undef	CONFIG_BOOT_ROOT_INITRD 	/* Use ram disk for the root file system */
+#define	CONFIG_BOOT_ROOT_NFS		/* Use a NFS mounted root file system */
 
 #ifdef CONFIG_BOOT_ROOT_INITRD
 #define CONFIG_BOOTCOMMAND \

include/configs/sbc8260.h

@@ -389,8 +389,8 @@
 /* Define a command string that is automatically executed when no character
  * is read on the console interface withing "Boot Delay" after reset.
  */
-#define CONFIG_BOOT_ROOT_INITRD 0	/* Use ram disk for the root file system */
-#define CONFIG_BOOT_ROOT_NFS	1	/* Use a NFS mounted root file system */
+#undef	CONFIG_BOOT_ROOT_INITRD 	/* Use ram disk for the root file system */
+#define	CONFIG_BOOT_ROOT_NFS		/* Use a NFS mounted root file system */
 
 #ifdef CONFIG_BOOT_ROOT_INITRD
 #define CONFIG_BOOTCOMMAND \

include/reiserfs.h

@@ -80,4 +80,3 @@ extern int reiserfs_ls (char *dirname);
 extern int reiserfs_open (char *filename);
 extern int reiserfs_read (char *buf, unsigned len);
 extern int reiserfs_mount (unsigned part_length);
-