Home Explore Help
Register Sign In
phyus
/
uboot-vybrid_public
8
0
Fork 0
Files Issues 0 Pull Requests 0 Wiki
Browse Source

mx6qsabrelite: Add boot switch setting information into the README

Add boot switch setting information into the README

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam 13 years ago
parent
66b4170b29
commit
b6e80e2485
1 changed files with 2 additions and 1 deletions
Unified View Show Diff Stats
  1. 2 1
      doc/README.mx6qsabrelite

+ 2 - 1
doc/README.mx6qsabrelite
View File 

@@ -31,7 +31,8 @@ Note: Replace sXx with the device representing the SD card in your system.
 
 Note: This writes SD card loader at address 0
 
 Note: This writes SD card loader at address 0
 
 
 
 2. Put this SD card into the slot for the large SD card (SD3 on the bottom of
 
 2. Put this SD card into the slot for the large SD card (SD3 on the bottom of
 
-the board)
 
+the board). Make sure SW1 switch is at position "00", so that it can boot
 
+from the fuses.
 
 
 
 3. Power-up the SabreLite, press 'space' to enter command mode in the U-Boot
 
 3. Power-up the SabreLite, press 'space' to enter command mode in the U-Boot
 
 (the default one the board is shipped with, starting from the SPI NOR) and
 
 (the default one the board is shipped with, starting from the SPI NOR) and