km/common: simplify debug environment

The debug environment which is stored in textfiles in the
scripts directory was reworked. Two usecase are now present
which can be executed simply from the default environment:
run develop: this configures the environment to setup the
             rootfs via nfs
run ramfs: this configures the environment to setup the
           rootfs in ram

Each architecture now has a "arch" variable which is used
to load the architecture specific debug scripts and to set
the rootpath for NFS.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>

board/keymile/scripts/README

@@ -1,23 +1,31 @@
-debug-common-env.txt
+These scripts are needed for our development usecases. Copy this directory
+into your tftp root directory to be able to use this scripts.
+cp -r <u-boot-repo>/board/keymile/scripts <your_tftp_root>/
+
+To load and configure these usecase, two environment variables in the u-boot
+default environment must be parsed:
+run develop : setup environment to configure for rootfs via nfs
+run ramfs   : setup environment to configure for rootfs in ram
+
+Last change: 20.05.2011
+
+develop-common.txt
+============================
+This file defines variables for working with rootfs via nfs for powerpc and
+arm.
+
+develop-<arch>.txt
 ============================
-This file defines environment variables which are valid for powerpc boards
-and for arm boards.
+This file defines architecture specific variables for working with rootfs via
+nfs arm.
 
-addramfs: add phram device for the rootfilesysten in ram
-develop: for development, laod kernel via tftp and mount  rootfs via NFS
-nfsargs: default arguments for nfs boot
-ramfs: load rootfilesystem in RAM  kernel
-rootfsfile: loacation of the rootfs file for ramfs
-setramfspram: compute PRAM size for ramfs target
-setrootfsaddr: compute rootfilesystem address for phram
-tftpkernel: load a kernel with tftp into ram
-tftpramfs: load rootfs with tftp into ram
 
-debug-ppc-env.txt
+ramfs-common.txt
 ============================
-fdt_file: location of the dtb file on the tftp server
-tftpfdt: load dtb file and set fdt address
+This file defines variables for working with rootfs inside the ram for powerpc
+and arm.
 
-debug-arm-env.txt
+ramfs-<arch>.txt
 ============================
-tftpfdt: for arm only a dummy variable, because we have no fdt on arm
+This file defines architecture specific variables for working with rootfs inside
+ram.

board/keymile/scripts/debug-arm-env.txt

@@ -1,2 +0,0 @@
-debug_env_common=tftpboot 0x200000 scripts/debug-common-env.txt && env import -t 0x200000 ${filesize}
-tftpfdt=true

board/keymile/scripts/debug-common-env.txt

@@ -1,9 +0,0 @@
-addramfs=setenv bootargs "${bootargs} phram.phram=rootfs${boot_bank},${rootfsaddr},${rootfssize}"
-develop=setenv subbootcmds "tftpfdt tftpkernel nfsargs ${commonargs} boot " && setenv bootcmd 'run bootrunner' && setenv altbootcmd 'run bootcmd' && km_setboardid && saveenv && reset
-nfsargs=setenv bootargs ubi.mtd=ubi0 root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
-ramfs=setenv actual_bank -1 && setenv subbootcmds "tftpfdt tftpkernel setrootfsaddr tftpramfs flashargs ${commonargs} addpanic addramfs boot " && setenv bootcmd 'run bootrunner' && setenv altbootcmd 'run bootcmd' && run setboardid && run setramfspram && run setpnvramaddr && saveenv && reset
-rootfsfile=${hostname}/rootfsImage
-setramfspram=setexpr value 0 + ${reservedpram} && setexpr value 0x${value} + ${rootfssize} && setexpr value 0x${value} + ${varsize} && setexpr value 0x${value} + ${pnvramsize} && setexpr value 0x${value} / 0x400 && setenv pram 0x${value}
-tftpkernel=tftpboot ${kernel_addr_r} ${hostname}/uImage && setenv actual_kernel_addr ${kernel_addr_r}
-tftpramfs=tftpboot ${rootfsaddr} ${hostname}/rootfsImage && setenv loadaddr
-setrootfsaddr=setexpr value ${pnvramsize} - ${rootfssize} && setenv rootfsaddr 0x${value}

board/keymile/scripts/debug-ppc-env.txt

@@ -1,2 +0,0 @@
-debug_env_common=tftpboot 0x200000 scripts/debug-common-env.txt && env import -t 0x200000 ${filesize}
-tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb && setenv actual_fdt_addr ${fdt_addr_r}

board/keymile/scripts/develop-arm.txt

@@ -0,0 +1,2 @@
+setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure
+tftpfdt=true

board/keymile/scripts/develop-common.txt

@@ -0,0 +1,6 @@
+altbootcmd=run ${subbootcmds}
+bootcmd=run ${subbootcmds}
+configure=km_setboardid && saveenv && reset
+subbootcmds=tftpfdt tftpkernel nfsargs add_default boot
+nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:/opt/eldk/${arch}
+tftpkernel=tftpboot ${load_addr_r} ${hostname}/uImage

board/keymile/scripts/develop-ppc_82xx.txt

@@ -0,0 +1,2 @@
+setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure
+tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb

board/keymile/scripts/develop-ppc_8xx.txt

@@ -0,0 +1,2 @@
+setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure
+tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb

board/keymile/scripts/ramfs-arm.txt

@@ -0,0 +1,2 @@
+setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure
+tftpfdt=true

board/keymile/scripts/ramfs-common.txt

@@ -0,0 +1,12 @@
+addramfs=setenv bootargs "${bootargs} mem=${rootfsaddr} phram.phram=rootfs${boot_bank},${rootfsaddr},${rootfssize}"
+actual_bank=-1
+altbootcmd=run ${subbootcmds}
+bootcmd=run ${subbootcmds}
+subbootcmds=tftpfdt tftpkernel setrootfsaddr tftpramfs flashargs add_default addpanic addramfs boot
+nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
+configure=km_setboardid && run setramfspram && saveenv && reset
+setramfspram=setexpr value 0 + ${rootfssize} && setexpr value 0x${value} / 0x400 && setexpr value 0x${value} + ${pram} && setenv pram 0x${value}
+rootfsfile=${hostname}/rootfsImage
+setrootfsaddr=setexpr value ${pnvramaddr} - ${rootfssize} && setenv rootfsaddr 0x${value}
+tftpkernel=tftpboot ${load_addr_r} ${hostname}/uImage
+tftpramfs=tftpboot ${rootfsaddr} ${hostname}/rootfsImage

board/keymile/scripts/ramfs-ppc_82xx.txt

@@ -0,0 +1,2 @@
+setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure
+tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb

board/keymile/scripts/ramfs-ppc_8xx.txt

@@ -0,0 +1,2 @@
+setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure
+tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb

include/configs/km/keymile-common.h

@@ -159,10 +159,14 @@
 #define CONFIG_KM_DEF_ENV_BOOTTARGETS					\
 	"subbootcmds=ubiattach ubicopy cramfsloadfdt cramfsloadkernel "	\
 		"flashargs add_default addpanic boot\0"			\
-	"debug_env="							\
-		"tftp 200000 " CONFIG_KM_ARCH_DBG_FILE " && "		\
+	"develop="							\
+		"tftp 200000 scripts/develop-${arch}.txt && "		\
 		"env import -t 200000 ${filesize} && "			\
-		"run debug_env_common\0"				\
+		"run setup_debug_env\0"					\
+	"ramfs="							\
+		"tftp 200000 scripts/ramfs-${arch}.txt && "		\
+		"env import -t 200000 ${filesize} && "			\
+		"run setup_debug_env\0"					\
 	""
 
 /*

include/configs/km/km-powerpc.h

@@ -83,6 +83,4 @@
 		"protect on " xstr(BOOTFLASH_START) "  +${filesize}\0"  \
 	""
 
-#define CONFIG_KM_ARCH_DBG_FILE		"scripts/debug-ppc-env.txt"
-
 #endif /* __CONFIG_KEYMILE_POWERPC_H */

include/configs/km/km82xx-common.h

@@ -87,7 +87,7 @@
 	"newenv="							\
 		"prot off 0xFE0C0000 +0x40000 && "			\
 		"era 0xFE0C0000 +0x40000\0"				\
-	"rootpath=/opt/eldk/ppc_82xx\0"					\
+	"arch=ppc_82xx\0"					\
 	""
 
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE

include/configs/km/km8321-common.h

@@ -33,8 +33,7 @@
 #define CONFIG_MPC832x	/* MPC832x CPU specific */
 #define CONFIG_KM8321	/* Keymile PBEC8321 board specific */
 
-#define CONFIG_KM_DEF_ROOTPATH		\
-	"rootpath=/opt/eldk/ppc_8xx\0"
+#define CONFIG_KM_DEF_ARCH	"arch=ppc_8xx\0"
 
 /* include common defines/options for all 83xx Keymile boards */
 #include "km83xx-common.h"

include/configs/km/km83xx-common.h

@@ -302,14 +302,13 @@
 #define CONFIG_KM_DEF_ENV "km-common=empty\0"
 #endif
 
-#ifndef CONFIG_KM_DEF_ROOTPATH
-#define CONFIG_KM_DEF_ROOTPATH		\
-	"rootpath=/opt/eldk/ppc_82xx\0"
+#ifndef CONFIG_KM_DEF_ARCH
+#define CONFIG_KM_DEF_ARCH	"arch=ppc_82xx\0"
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_KM_DEF_ENV						\
-	CONFIG_KM_DEF_ROOTPATH						\
+	CONFIG_KM_DEF_ARCH						\
 	"dtt_bus=pca9547:70:a\0"					\
 	"EEprom_ivm=pca9547:70:9\0"					\
 	"newenv="							\

include/configs/km/km_arm.h

@@ -77,8 +77,6 @@
 	CONFIG_KM_DEF_ENV_UPDATE					\
 	""
 
-#define CONFIG_KM_ARCH_DBG_FILE		"scripts/debug-arm-env.txt"
-
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
 #define CONFIG_MISC_INIT_R
 
@@ -243,7 +241,7 @@ int get_scl(void);
 		" ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && "		\
 		"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)	\
 		" ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0"	\
-	"rootpath=/opt/eldk/arm\0"					\
+	"arch=arm\0"							\
 	"EEprom_ivm=" KM_IVM_BUS "\0"					\
 	""