pxa: move mmc drivers to drivers/mmc

introduce new macro CONFIG_PXA_MMC to activate it

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

cpu/pxa/Makefile

@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
-COBJS	= serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o usb.o
+COBJS	= serial.o interrupts.o cpu.o i2c.o pxafb.o usb.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))

drivers/mmc/Makefile

@@ -30,6 +30,7 @@ COBJS-$(CONFIG_ATMEL_MCI) += atmel_mci.o
 COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o
 COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o
 COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
+COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

cpu/pxa/mmc.c → drivers/mmc/pxa_mmc.c

@@ -28,9 +28,7 @@
 #include <asm/arch/hardware.h>
 #include <part.h>
 
-#include "mmc.h"
-
-#ifdef CONFIG_MMC
+#include "pxa_mmc.h"
 
 extern int fat_register_device(block_dev_desc_t * dev_desc, int part_no);
 
@@ -646,5 +644,3 @@ mmc_legacy_init(int verbose)
 
 	return rc;
 }
-
-#endif /* CONFIG_MMC */

include/configs/delta.h

@@ -34,7 +34,6 @@
 #ifdef CONFIG_LCD
 #define CONFIG_SHARP_LM8V31
 #endif
-/* #define CONFIG_MMC		1 */
 #define BOARD_LATE_INIT		1
 
 #undef CONFIG_SKIP_RELOCATE_UBOOT
@@ -181,7 +180,11 @@
 						/* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-/* #define CONFIG_SYS_MMC_BASE		0xF0000000 */
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_SYS_MMC_BASE		0xF0000000
+#endif
 
 /*
  * Stack sizes

include/configs/lubbock.h

@@ -40,7 +40,7 @@
 #ifdef CONFIG_LCD
 #define CONFIG_SHARP_LM8V31
 #endif
-#define CONFIG_MMC		1
+#define CONFIG_MMC
 #define BOARD_LATE_INIT		1
 #define CONFIG_DOS_PARTITION
 
@@ -83,7 +83,6 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_MMC
 #define CONFIG_CMD_FAT
 
 
@@ -133,7 +132,11 @@
 						/* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE		0xF0000000
+#endif
 
 /*
  * Stack sizes

include/configs/pleb2.h

@@ -132,6 +132,11 @@
 						/* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
+#endif
+
 /*
  * Stack sizes
  *

include/configs/pxa255_idp.h

@@ -119,7 +119,6 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_MMC
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_DHCP
 
@@ -249,7 +248,11 @@
 						/* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE		0xF0000000
+#endif
 
 /*
  * Stack sizes

include/configs/trizepsiv.h

@@ -79,7 +79,6 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_MMC
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_IMLS
 #define CONFIG_CMD_PING
@@ -174,7 +173,11 @@
 						/* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE		0xF0000000
+#endif
 
 /*
  * Stack sizes

include/configs/xsengine.h

@@ -115,7 +115,6 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_MMC
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_JFFS2
@@ -142,9 +141,14 @@
 #define CONFIG_SYS_MEMTEST_END			0xA0800000				/* 4 ... 8 MB in DRAM   */
 #undef  CONFIG_SYS_CLKS_IN_HZ								/* everything, incl board info, in Hz */
 #define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, 115200 }	/* valid baudrates */
-#define CONFIG_SYS_MMC_BASE			0xF0000000
 #define CONFIG_SYS_LOAD_ADDR			0xA0000000				/* load kernel to this address   */
 
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_SYS_MMC_BASE			0xF0000000
+#endif
+
 /* Stack sizes - The stack sizes are set up in start.S using the settings below */
 #define CONFIG_STACKSIZE		(128*1024)	/* regular stack */
 #ifdef  CONFIG_USE_IRQ

include/configs/zylonite.h

@@ -41,7 +41,7 @@
 #ifdef CONFIG_LCD
 #define CONFIG_SHARP_LM8V31
 #endif
-/* #define CONFIG_MMC		1 */
+#undef CONFIG_MMC
 #define BOARD_LATE_INIT		1
 
 #undef CONFIG_SKIP_RELOCATE_UBOOT
@@ -152,7 +152,11 @@
 						/* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-/* #define CONFIG_SYS_MMC_BASE		0xF0000000 */
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_SYS_MMC_BASE		0xF0000000
+#endif
 
 /*
  * Stack sizes