Make compile clean, fix the usual small problems.

board/esd/pci405/pci405.c

@@ -103,7 +103,6 @@ int misc_init_r (void)
 	int status;
 	int index;
 	int i;
-	struct pci_config_regs *pci_regs;
 	unsigned int *ptr;
 	unsigned int *magic;
 

board/pm826/pm826.c

@@ -351,6 +351,7 @@ void doc_init (void)
 }
 #endif
 
+#ifdef	CONFIG_PCI
 struct pci_controller hose;
 
 extern void pci_mpc8250_init(struct pci_controller *);
@@ -359,3 +360,4 @@ void pci_init_board(void)
 {
 	pci_mpc8250_init(&hose);
 }
+#endif

common/cmd_doc.c

@@ -21,6 +21,7 @@
 
 #if (CONFIG_COMMANDS & CFG_CMD_DOC)
 
+#include <linux/mtd/nftl.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ids.h>
 #include <linux/mtd/doc2000.h>

common/cmd_nand.c

@@ -7,7 +7,6 @@
  */
 
 #include <common.h>
-#include <config.h>
 #include <command.h>
 #include <malloc.h>
 #include <asm/io.h>

drivers/inca-ip_sw.c

@@ -0,0 +1,646 @@
+/*
+ * INCA-IP internal switch ethernet driver.
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
+	&& defined(CONFIG_INCA_IP_SWITCH)
+
+#include <malloc.h>
+#include <net.h>
+#include <asm/inca-ip.h>
+#include <asm/addrspace.h>
+
+
+#define NUM_RX_DESC	PKTBUFSRX
+#define NUM_TX_DESC	3
+#define TOUT_LOOP	1000000
+
+
+#define DELAY	udelay(10000)
+
+#define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value;
+#define DMA_READ_REG(reg, value)    value = (u32)*((volatile u32*)reg)
+#define SW_WRITE_REG(reg, value)   \
+         *((volatile u32*)reg) = (u32)value;\
+         DELAY;\
+         *((volatile u32*)reg) = (u32)value;
+
+#define SW_READ_REG(reg, value)    \
+         value = (u32)*((volatile u32*)reg);\
+         DELAY;\
+         value = (u32)*((volatile u32*)reg);
+
+#define INCA_DMA_TX_POLLING_TIME       0x07
+#define INCA_DMA_RX_POLLING_TIME       0x07
+
+#define INCA_DMA_TX_HOLD   0x80000000
+#define INCA_DMA_TX_EOP    0x40000000
+#define INCA_DMA_TX_SOP    0x20000000
+#define INCA_DMA_TX_ICPT   0x10000000
+#define INCA_DMA_TX_IEOP   0x08000000
+
+#define INCA_DMA_RX_C   0x80000000
+#define INCA_DMA_RX_SOP 0x40000000
+#define INCA_DMA_RX_EOP 0x20000000
+
+
+typedef struct
+{
+	union
+	{
+		struct
+		{
+			volatile u32 HOLD                :1;
+			volatile u32 ICpt                :1;
+			volatile u32 IEop                :1;
+			volatile u32 offset              :3;
+			volatile u32 reserved0           :4;
+			volatile u32 NFB                 :22;
+		}field;
+
+		volatile u32 word;
+	}params;
+
+	volatile u32 nextRxDescPtr;
+
+	volatile u32 RxDataPtr;
+
+	union
+	{
+		struct
+		{
+			volatile u32 C                   :1;
+			volatile u32 Sop                 :1;
+			volatile u32 Eop                 :1;
+			volatile u32 reserved3           :12;
+			volatile u32 NBT                 :17;
+		}field;
+
+		volatile u32 word;
+	}status;
+
+} inca_rx_descriptor_t;
+
+
+typedef struct
+{
+	union
+	{
+		struct
+		{
+			volatile u32 HOLD                :1;
+			volatile u32 Eop                 :1;
+			volatile u32 Sop                 :1;
+			volatile u32 ICpt                :1;
+			volatile u32 IEop                :1;
+			volatile u32 reserved0           :5;
+			volatile u32 NBA                 :22;
+		}field;
+
+		volatile u32 word;
+	}params;
+
+	volatile u32 nextTxDescPtr;
+
+	volatile u32 TxDataPtr;
+
+	volatile u32 C                   :1;
+	volatile u32 reserved3           :31;
+
+} inca_tx_descriptor_t;
+
+
+static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16)));
+static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16)));
+
+static int tx_new, rx_new, tx_hold, rx_hold;
+static int tx_old_hold = -1;
+static int initialized  = 0;
+
+
+static int inca_switch_init(struct eth_device *dev, bd_t * bis);
+static int inca_switch_send(struct eth_device *dev, volatile void *packet,
+						  int length);
+static int inca_switch_recv(struct eth_device *dev);
+static void inca_switch_halt(struct eth_device *dev);
+static void inca_init_switch_chip(void);
+static void inca_dma_init(void);
+
+
+
+int inca_switch_initialize(bd_t * bis)
+{
+	struct eth_device *dev;
+
+#if 0
+	printf("Entered inca_switch_initialize()\n");
+#endif
+
+	if (!(dev = (struct eth_device *) malloc (sizeof *dev)))
+	{
+		printf("Failed to allocate memory\n");
+		return 0;
+	}
+	memset(dev, 0, sizeof(*dev));
+
+	inca_dma_init();
+
+	inca_init_switch_chip();
+
+	sprintf(dev->name, "INCA-IP Switch");
+	dev->init = inca_switch_init;
+	dev->halt = inca_switch_halt;
+	dev->send = inca_switch_send;
+	dev->recv = inca_switch_recv;
+
+	eth_register(dev);
+
+#if 0
+	printf("Leaving inca_switch_initialize()\n");
+#endif
+
+	return 1;
+}
+
+
+static int inca_switch_init(struct eth_device *dev, bd_t * bis)
+{
+	int i;
+	u32 v, regValue;
+	u16 wTmp;
+
+#if 0
+	printf("Entering inca_switch_init()\n");
+#endif
+
+		/* Set MAC address.
+		 */
+	wTmp = (u16)dev->enetaddr[0];
+	regValue = (wTmp << 8) | dev->enetaddr[1];
+
+	SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue);
+
+	wTmp = (u16)dev->enetaddr[2];
+	regValue = (wTmp << 8) | dev->enetaddr[3];
+	regValue = regValue << 16;
+	wTmp = (u16)dev->enetaddr[4];
+	regValue |= (wTmp<<8) | dev->enetaddr[5];
+
+	SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue);
+
+		/* Initialize the descriptor rings.
+		 */
+	for (i = 0; i < NUM_RX_DESC; i++)
+	{
+		inca_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_ring[i]);
+		memset(rx_desc, 0, sizeof(rx_ring[i]));
+
+			/* Set maximum size of receive buffer.
+			 */
+		rx_desc->params.field.NFB = PKTSIZE_ALIGN;
+
+			/* Set the offset of the receive buffer. Zero means
+			 * that the offset mechanism is not used.
+			 */
+		rx_desc->params.field.offset = 0;
+
+		/* Check if it is the last descriptor.
+		 */
+		if (i == (NUM_RX_DESC - 1))
+		{
+				/* Let the last descriptor point to the first
+				 * one.
+				 */
+			rx_desc->nextRxDescPtr = KSEG1ADDR((u32)rx_ring);
+		}
+		else
+		{
+				/* Set the address of the next descriptor.
+				 */
+			rx_desc->nextRxDescPtr = (u32)KSEG1ADDR(&rx_ring[i+1]);
+		}
+
+		rx_desc->RxDataPtr = (u32)KSEG1ADDR(NetRxPackets[i]);
+	}
+
+#if 0
+	printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]);
+	printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]);
+#endif
+
+	for (i = 0; i < NUM_TX_DESC; i++)
+	{
+		inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[i]);
+
+		memset(tx_desc, 0, sizeof(tx_ring[i]));
+
+		tx_desc->params.word       = 0;
+		tx_desc->params.field.HOLD = 1;
+		tx_desc->C                 = 1;
+
+			/* Check if it is the last descriptor.
+			 */
+		if (i == (NUM_TX_DESC - 1))
+		{
+				/* Let the last descriptor point to the
+				 * first one.
+				 */
+			tx_desc->nextTxDescPtr = KSEG1ADDR((u32)tx_ring);
+		}
+		else
+		{
+				/* Set the address of the next descriptor.
+				 */
+			tx_desc->nextTxDescPtr = (u32)KSEG1ADDR(&tx_ring[i+1]);
+		}
+	}
+
+		/* Initialize RxDMA.
+		 */
+	DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v);
+#if 0
+	printf("RX status = 0x%08X\n", v);
+#endif
+
+		/* Writing to the FRDA of CHANNEL.
+		 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring);
+
+		/* Writing to the COMMAND REG.
+		 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0,
+	              INCA_IP_DMA_DMA_RXCCR0_INIT);
+
+		/* Initialize TxDMA.
+		 */
+	DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v);
+#if 0
+	printf("TX status = 0x%08X\n", v);
+#endif
+
+		/* Writing to the FRDA of CHANNEL.
+		 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring);
+
+	tx_new = rx_new = 0;
+
+	tx_hold = NUM_TX_DESC - 1;
+	rx_hold = NUM_RX_DESC - 1;
+
+#if 0
+	rx_ring[rx_hold].params.field.HOLD = 1;
+#endif
+	   /* enable spanning tree forwarding, enable the CPU port */
+	   /* ST_PT:
+	         CPS (CPU port status)   0x3 (forwarding)
+	         LPS (LAN port status)   0x3 (forwarding)
+	         PPS (PC port status)    0x3 (forwarding)
+	   */
+	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f);
+
+#if 0
+	printf("Leaving inca_switch_init()\n");
+#endif
+
+	return 0;
+}
+
+
+static int inca_switch_send(struct eth_device *dev, volatile void *packet,
+						  int length)
+{
+	int                    i;
+	int                    res         = -1;
+	u32                    command;
+	u32                    regValue;
+	inca_tx_descriptor_t * tx_desc     = KSEG1ADDR(&tx_ring[tx_new]);
+
+#if 0
+	printf("Entered inca_switch_send()\n");
+#endif
+
+	if (length <= 0)
+	{
+		printf ("%s: bad packet size: %d\n", dev->name, length);
+		goto Done;
+	}
+	
+	for(i = 0; tx_desc->C == 0; i++)
+	{
+		if (i >= TOUT_LOOP)
+		{
+			printf("%s: tx error buffer not ready\n", dev->name);
+			goto Done;
+		}
+	}
+
+	if (tx_old_hold >= 0)
+	{
+		KSEG1ADDR(&tx_ring[tx_old_hold])->params.field.HOLD = 1;
+	}
+	tx_old_hold = tx_hold;
+
+	tx_desc->params.word =
+	                (INCA_DMA_TX_SOP | INCA_DMA_TX_EOP | INCA_DMA_TX_HOLD);
+
+	tx_desc->C = 0;
+	tx_desc->TxDataPtr = (u32)packet;
+	tx_desc->params.field.NBA = length;
+
+	KSEG1ADDR(&tx_ring[tx_hold])->params.field.HOLD = 0;
+
+	tx_hold = tx_new;
+	tx_new  = (tx_new + 1) % NUM_TX_DESC;
+
+
+	if (! initialized)
+	{
+		command = INCA_IP_DMA_DMA_TXCCR0_INIT;
+		initialized = 1;
+	}
+	else
+	{
+		command = INCA_IP_DMA_DMA_TXCCR0_HR;
+	}
+	
+	DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
+	regValue |= command;
+#if 0
+	printf("regValue = 0x%x\n", regValue);
+#endif
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
+
+#if 1
+	for(i = 0; KSEG1ADDR(&tx_ring[tx_hold])->C == 0; i++)
+	{
+		if (i >= TOUT_LOOP)
+		{
+			printf("%s: tx buffer not ready\n", dev->name);
+			goto Done;
+		}
+	}
+#endif
+	res = length;
+Done:
+#if 0
+	printf("Leaving inca_switch_send()\n");
+#endif
+	return res;
+}
+
+
+static int inca_switch_recv(struct eth_device *dev)
+{
+	int                    length  = 0;
+	inca_rx_descriptor_t * rx_desc;
+
+#if 0
+	printf("Entered inca_switch_recv()\n");
+#endif
+
+	for (;;)
+	{
+		rx_desc = KSEG1ADDR(&rx_ring[rx_new]);
+
+		if (rx_desc->status.field.C == 0)
+		{
+			break;
+		}
+
+#if 0
+		rx_ring[rx_new].params.field.HOLD = 1;
+#endif
+
+		if (! rx_desc->status.field.Eop)
+		{
+			printf("Partly received packet!!!\n");
+			break;
+		}
+
+		length = rx_desc->status.field.NBT;
+		rx_desc->status.word &=
+		         ~(INCA_DMA_RX_EOP | INCA_DMA_RX_SOP | INCA_DMA_RX_C);
+#if 0
+{
+  int i;
+  for (i=0;i<length - 4;i++) {
+    if (i % 16 == 0) printf("\n%04x: ", i);
+    printf("%02X ", NetRxPackets[rx_new][i]);
+  }
+  printf("\n");
+}
+#endif
+
+		if (length)
+		{
+#if 0
+			printf("Received %d bytes\n", length);
+#endif
+			NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_new]),
+			            length - 4);
+		}
+		else
+		{
+#if 1
+			printf("Zero length!!!\n");
+#endif
+		}
+
+
+		KSEG1ADDR(&rx_ring[rx_hold])->params.field.HOLD = 0;
+
+		rx_hold = rx_new;
+
+		rx_new = (rx_new + 1) % NUM_RX_DESC;
+	}
+
+#if 0
+	printf("Leaving inca_switch_recv()\n");
+#endif
+
+	return length;
+}
+
+
+static void inca_switch_halt(struct eth_device *dev)
+{
+#if 0
+	printf("Entered inca_switch_halt()\n");
+#endif
+
+#if 1
+	initialized = 0;
+#endif
+#if 1
+		/* Disable forwarding to the CPU port.
+		 */
+	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
+
+		/* Close RxDMA channel.
+		 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
+
+		/* Close TxDMA channel.
+		 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF);
+
+
+#endif
+#if 0
+	printf("Leaving inca_switch_halt()\n");
+#endif
+}
+
+
+static void inca_init_switch_chip(void)
+{
+	u32 regValue;
+
+		/* To workaround a problem with collision counter
+		 * (see Errata sheet).
+		 */
+	SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001);
+	SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001);
+
+#if 1
+	   /* init MDIO configuration: 
+	         MDS (Poll speed):       0x01 (4ms)
+	         PHY_LAN_ADDR:           0x06
+	         PHY_PC_ADDR:            0x05
+	         UEP (Use External PHY): 0x00 (Internal PHY is used)
+	         PS (Port Select):       0x00 (PT/UMM for LAN)
+	         PT (PHY Test):          0x00 (no test mode)
+	         UMM (Use MDIO Mode):    0x00 (state machine is disabled)
+	   */
+	SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50);
+
+	   /* init PHY: 
+	         SL (Auto Neg. Speed for LAN)
+	         SP (Auto Neg. Speed for PC)
+	         LL (Link Status for LAN)
+	         LP (Link Status for PC)
+	         DL (Duplex Status for LAN)
+	         DP (Duplex Status for PC)
+	         PL (Auto Neg. Pause Status for LAN)
+	         PP (Auto Neg. Pause Status for PC)
+	   */
+	SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff);
+
+	   /* MDIO_ACC:
+	         RA (Request/Ack)  0x01 (Request)
+	         RW (Read/Write)   0x01 (Write)
+	         PHY_ADDR          0x05 (PC)
+	         REG_ADDR          0x00 (PHY_BCR: basic control register)
+	         PHY_DATA          0x8000
+	                              Reset                   - software reset
+	                              LB (loop back)          - normal
+	                              SS (speed select)       - 10 Mbit/s
+	                              ANE (auto neg. enable)  - disable
+	                              PD (power down)         - normal
+	                              ISO (isolate)           - normal
+	                              RAN (restart auto neg.) - normal
+	                              DM (duplex mode)        - half duplex
+	                              CT (collision test)     - enable
+	   */
+	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a08000);
+
+	   /* MDIO_ACC:
+	         RA (Request/Ack)  0x01 (Request)
+	         RW (Read/Write)   0x01 (Write)
+	         PHY_ADDR          0x06 (LAN)
+	         REG_ADDR          0x00 (PHY_BCR: basic control register)
+	         PHY_DATA          0x8000
+	                              Reset                   - software reset
+	                              LB (loop back)          - normal
+	                              SS (speed select)       - 10 Mbit/s
+	                              ANE (auto neg. enable)  - disable
+	                              PD (power down)         - normal
+	                              ISO (isolate)           - normal
+	                              RAN (restart auto neg.) - normal
+	                              DM (duplex mode)        - half duplex
+	                              CT (collision test)     - enable
+	   */
+	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c08000);
+#endif
+
+		/* Make sure the CPU port is disabled for now. We
+		 * don't want packets to get stacked for us until
+		 * we enable DMA and are prepared to receive them.
+		 */
+	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
+
+	SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue);
+
+		/* CRC GEN is enabled.
+		 */
+	regValue |= 0x00000200;
+	SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue);
+
+		/* ADD TAG is disabled.
+		 */
+	SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
+	regValue &= ~0x00000002;
+	SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
+}
+
+
+static void inca_dma_init(void)
+{
+		/* Switch off all DMA channels.
+		 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF);
+
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF);
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF);
+
+		/* Setup TX channel polling time.
+		 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME);
+
+		/* Setup RX channel polling time.
+		 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME);
+
+		/* ERRATA: write reset value into the DMA RX IMR register.
+		 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF);
+
+		/* Just in case: disable all transmit interrupts also.
+		 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF);
+
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF);
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF);
+}
+
+#endif
+
+	/* End of file.
+	 */
+

examples/Makefile

@@ -62,7 +62,7 @@ $(LIB): .depend $(LIBOBJS)
 	$(OBJCOPY) -O srec $(<:.o=) $@
 
 %.bin:	%.srec
-	$(OBJCOPY) -O binary $< $@
+	$(OBJCOPY) -O binary $< $@ 2>/dev/null
 
 #########################################################################
 

include/configs/CPCI4052.h

@@ -303,7 +303,7 @@
 #define CFG_EBC_PB3CR           0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 4 (NVRAM/RTC) initialization                                     */
-//#define CFG_EBC_PB4AP           0x01805280  /* TWT=3,WBN=1,WBF=1,TH=1,SOR=1     */
+/*#define CFG_EBC_PB4AP           0x01805280  / * TWT=3,WBN=1,WBF=1,TH=1,SOR=1     */
 #define CFG_EBC_PB4AP           0x01805680  /* TWT=3,WBN=1,WBF=1,TH=3,SOR=1     */
 #define CFG_EBC_PB4CR           0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit  */
 

include/configs/LANTEC.h

@@ -98,6 +98,7 @@
 					     & ~CFG_CMD_JFFS2	\
 					     & ~CFG_CMD_KGDB	\
 					     & ~CFG_CMD_MII	\
+					     & ~CFG_CMD_NAND	\
 					     & ~CFG_CMD_PCI	\
 					     & ~CFG_CMD_PCMCIA	\
 					     & ~CFG_CMD_SCSI	\

include/configs/MPC8260ADS.h

@@ -126,6 +126,7 @@
 				 CFG_CMD_IDE	| \
 				 CFG_CMD_JFFS2	| \
 				 CFG_CMD_KGDB	| \
+				 CFG_CMD_NAND	| \
 				 CFG_CMD_MII	| \
 				 CFG_CMD_PCI	| \
 				 CFG_CMD_PCMCIA | \

include/configs/MPC8266ADS.h

@@ -125,6 +125,7 @@
 				 CFG_CMD_IDE	| \
 				 CFG_CMD_JFFS2	| \
 				 CFG_CMD_KGDB	| \
+				 CFG_CMD_NAND	| \
 				 CFG_CMD_MII	| \
 				 CFG_CMD_PCI	| \
 				 CFG_CMD_PCMCIA | \

include/configs/PCI405.h

@@ -276,7 +276,7 @@
 
 /* Memory Bank 2 (CAN0, 1) initialization                                       */
 #define CFG_EBC_PB2AP           0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-//#define CFG_EBC_PB2AP           0x038056C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+/*#define CFG_EBC_PB2AP           0x038056C0  / * BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 #define CFG_EBC_PB2CR           0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 
 /* Memory Bank 3 (FPGA internal) initialization                                 */

include/configs/PM826.h

@@ -198,7 +198,7 @@
 
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_RESET_ADDRESS 0xFFFFFFFC	/* "bad" address		*/
+#define	CFG_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
 
 /*
  * For booting Linux, the board info and command line data

include/configs/ep8260.h

@@ -282,6 +282,7 @@
 					~CFG_CMD_JFFS2	& \
 					~CFG_CMD_KGDB   & \
 					~CFG_CMD_MII    & \
+					~CFG_CMD_NAND	& \
 					~CFG_CMD_PCI    & \
 					~CFG_CMD_PCMCIA & \
 					~CFG_CMD_SCSI   & \

include/configs/hymod.h

@@ -145,6 +145,7 @@
 					CFG_CMD_HWFLOW	| \
 					CFG_CMD_IDE	| \
 					CFG_CMD_JFFS2	| \
+					CFG_CMD_NAND	| \
 					CFG_CMD_MII	| \
 					CFG_CMD_PCMCIA	| \
 					CFG_CMD_PCI	| \

include/linux/mtd/doc2000.h

@@ -81,13 +81,6 @@ struct DiskOnChip;
 #define DOC_ECC_EN (DOC_ECC__EN | DOC_ECC_RESV)
 #define DOC_ECC_DIS (DOC_ECC_RESV)
 
-struct Nand {
-	char floor, chip;
-	unsigned long curadr;
-	unsigned char curmode;
-	/* Also some erase/write/pipeline info when we get that far */
-};
-
 #define MAX_FLOORS 4
 #define MAX_CHIPS 4
 

lib_arm/_udivsi3.S

@@ -5,10 +5,10 @@ dividend	.req	r0
 divisor		.req	r1
 result		.req	r2
 curbit		.req	r3
-ip		.req	r12
-sp		.req	r13
-lr		.req	r14
-pc		.req	r15
+/* ip		.req	r12	*/
+/* sp		.req	r13	*/
+/* lr		.req	r14	*/
+/* pc		.req	r15	*/
 	.text
 	.globl	 __udivsi3
 	.type  __udivsi3       ,function

lib_arm/_umodsi3.S

@@ -6,10 +6,10 @@ dividend	.req	r0
 divisor		.req	r1
 overdone	.req	r2
 curbit		.req	r3
-ip		.req	r12
-sp		.req	r13
-lr		.req	r14
-pc		.req	r15
+/* ip		.req	r12	*/
+/* sp		.req	r13	*/
+/* lr		.req	r14	*/
+/* pc		.req	r15	*/
 	.text
 	.globl	 __umodsi3
 	.type  __umodsi3       ,function