LAN91C96: Enable NET_MULTI LAN driver

This modification is NOT tested on any of the
platforms modified as I dont have them. please
help by testing+building+fixing

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

board/apollon/apollon.c

@@ -24,6 +24,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <netdev.h>
 #include <asm/arch/omap2420.h>
 #include <asm/io.h>
 #include <asm/arch/bits.h>
@@ -138,13 +139,14 @@ void wait_for_command_complete(unsigned int wd_base)
 }
 
 /*******************************************************************
- * Routine:ether_init
+ * Routine:board_eth_init
  * Description: take the Ethernet controller out of reset and wait
  *		   for the EEPROM load to complete.
  ******************************************************************/
-void ether_init(void)
+int board_eth_init(bd_t *bis)
 {
-#ifdef CONFIG_DRIVER_LAN91C96
+	int rc = 0;
+#ifdef CONFIG_LAN91C96
 	int cnt = 20;
 
 	__raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2);	/*protect->gpio74 */
@@ -171,10 +173,10 @@ void ether_init(void)
 
 	mask_config_reg(ETH_CONTROL_REG, 0x01);
 	udelay(1000);
-
+	rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
 eth_reset_err_out:
-	return;
 #endif
+	return rc;
 }
 
 /**********************************************

include/configs/B2.h

@@ -58,7 +58,7 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE		0x04000300 /* base address         */
 #define CONFIG_SMC_USE_32_BIT
 #undef  CONFIG_SHOW_ACTIVITY

include/configs/apollon.h

@@ -88,7 +88,8 @@
 /*
  * SMC91c96 Etherent
  */
-#define	CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define	CONFIG_LAN91C96
 #define	CONFIG_LAN91C96_BASE	(APOLLON_CS1_BASE+0x300)
 #define	CONFIG_LAN91C96_EXT_PHY
 

include/configs/assabet.h

@@ -53,7 +53,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96	/* we have an SMC9194 on-board */
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96	/* we have an SMC9194 on-board */
 #define CONFIG_LAN91C96_BASE	0x18000000
 
 /*

include/configs/gcplus.h

@@ -66,7 +66,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96	/* we have an SMC9194 on-board */
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96	/* we have an SMC9194 on-board */
 #define CONFIG_LAN91C96_BASE	0x100e0000
 
 /*

include/configs/lubbock.h

@@ -58,7 +58,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x0C000000
 
 /*

include/configs/omap1510inn.h

@@ -60,7 +60,8 @@
 #define CONFIG_SMC9196_BASE 0x08000300
 #define CONFIG_SMC9196_EXT_PHY
 */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x08000300
 #define CONFIG_LAN91C96_EXT_PHY
 

include/configs/omap1610h2.h

@@ -57,7 +57,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x04000300
 #define CONFIG_LAN91C96_EXT_PHY
 

include/configs/omap1610inn.h

@@ -58,7 +58,8 @@
  */
 /*
 */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x04000300
 #define CONFIG_LAN91C96_EXT_PHY
 

include/configs/omap2420h4.h

@@ -81,7 +81,8 @@
 /*
  * SMC91c96 Etherent
  */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE     (H4_CS1_BASE+0x300)
 #define CONFIG_LAN91C96_EXT_PHY
 

include/configs/omap5912osk.h

@@ -61,7 +61,8 @@
  */
 /*
 */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x04800300
 #define CONFIG_LAN91C96_EXT_PHY
 

include/configs/omap730p2.h

@@ -65,7 +65,8 @@
  * Hardware drivers
  */
 
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE	   0x04000300
 #define CONFIG_LAN91C96_EXT_PHY
 

include/configs/pleb2.h

@@ -56,8 +56,10 @@
  */
 
 /* None - PLEB 2 doesn't have any of this.
-   #define CONFIG_DRIVER_LAN91C96
-   #define CONFIG_LAN91C96_BASE 0x0C000000 */
+	#define CONFIG_NET_MULTI
+	#define CONFIG_LAN91C96
+	#define CONFIG_LAN91C96_BASE 0x0C000000
+ */
 
 /*
  * select serial console configuration