mpc83xx: add support for mpc8309

This processor, though very similar to other members of the
PowerQUICC II Pro family (namely 8308, 8360 and 832x), provides
yet another feature set than any supported sibling.

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

arch/powerpc/cpu/mpc83xx/cpu.c

@@ -56,6 +56,7 @@ int checkcpu(void)
 		u32 partid;
 	} cpu_type_list [] = {
 		CPU_TYPE_ENTRY(8308),
+		CPU_TYPE_ENTRY(8309),
 		CPU_TYPE_ENTRY(8311),
 		CPU_TYPE_ENTRY(8313),
 		CPU_TYPE_ENTRY(8314),

arch/powerpc/cpu/mpc83xx/cpu_init.c

@@ -268,6 +268,9 @@ void cpu_init_f (volatile immap_t * im)
 #ifdef CONFIG_SYS_SICRL
 	__raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl);
 #endif
+#ifdef CONFIG_SYS_GPR1
+	__raw_writel(CONFIG_SYS_GPR1, &im->sysconf.gpr1);
+#endif
 #ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */
 	__raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr);
 #endif

arch/powerpc/cpu/mpc83xx/speed.c

@@ -105,6 +105,8 @@ int get_clocks(void)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
 	u32 usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+	u32 usbdr_clk;
 #endif
 #ifdef CONFIG_MPC834x
 	u32 usbmph_clk;
@@ -120,7 +122,9 @@ int get_clocks(void)
 #if defined(CONFIG_FSL_ESDHC)
 	u32 sdhc_clk;
 #endif
+#if !defined(CONFIG_MPC8309)
 	u32 enc_clk;
+#endif
 	u32 lbiu_clk;
 	u32 lclk_clk;
 	u32 mem_clk;
@@ -263,6 +267,7 @@ int get_clocks(void)
 		return -6;
 	}
 #endif
+#if !defined(CONFIG_MPC8309)
 	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
 	case 0:
 		enc_clk = 0;
@@ -280,6 +285,7 @@ int get_clocks(void)
 		/* unkown SCCR_ENCCM value */
 		return -7;
 	}
+#endif
 
 #if defined(CONFIG_FSL_ESDHC)
 	switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
@@ -332,6 +338,8 @@ int get_clocks(void)
 	i2c1_clk = sdhc_clk;
 #elif defined(CONFIG_MPC837x)
 	i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC8309)
+	i2c1_clk = csb_clk;
 #endif
 #if !defined(CONFIG_MPC832x)
 	i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
@@ -460,6 +468,8 @@ int get_clocks(void)
 	gd->tsec1_clk = tsec1_clk;
 	gd->tsec2_clk = tsec2_clk;
 	gd->usbdr_clk = usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+	gd->usbdr_clk = usbdr_clk;
 #endif
 #if defined(CONFIG_MPC834x)
 	gd->usbmph_clk = usbmph_clk;
@@ -475,7 +485,9 @@ int get_clocks(void)
 #if !defined(CONFIG_MPC832x)
 	gd->i2c2_clk = i2c2_clk;
 #endif
+#if !defined(CONFIG_MPC8309)
 	gd->enc_clk = enc_clk;
+#endif
 	gd->lbiu_clk = lbiu_clk;
 	gd->lclk_clk = lclk_clk;
 	gd->mem_clk = mem_clk;
@@ -536,7 +548,9 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 #if defined(CONFIG_MPC8360)
 	printf("  DDR Secondary:       %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
 #endif
+#if !defined(CONFIG_MPC8309)
 	printf("  SEC:                 %-4s MHz\n", strmhz(buf, gd->enc_clk));
+#endif
 	printf("  I2C1:                %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
 #if !defined(CONFIG_MPC832x)
 	printf("  I2C2:                %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
@@ -552,6 +566,8 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 	printf("  TSEC1:               %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
 	printf("  TSEC2:               %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
 	printf("  USB DR:              %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+#elif defined(CONFIG_MPC8309)
+	printf("  USB DR:              %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
 #endif
 #if defined(CONFIG_MPC834x)
 	printf("  USB MPH:             %-4s MHz\n", strmhz(buf, gd->usbmph_clk));

arch/powerpc/include/asm/global_data.h

@@ -63,6 +63,8 @@ typedef	struct	global_data {
 	u32 tsec1_clk;
 	u32 tsec2_clk;
 	u32 usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+	u32 usbdr_clk;
 #endif
 #if defined (CONFIG_MPC834x)
 	u32 usbmph_clk;

arch/powerpc/include/asm/immap_83xx.h

@@ -78,7 +78,14 @@ typedef struct sysconf83xx {
 #else
 	u32 pecr2;		/* PCI Express control register 2 */
 #endif
+#if defined(CONFIG_MPC8309)
+	u32 can_dbg_ctrl;
+	u32 res9a;
+	u32 gpr1;
+	u8 res9b[0xAC];
+#else
 	u8 res9[0xB8];
+#endif
 } sysconf83xx_t;
 
 /*
@@ -708,7 +715,11 @@ typedef struct serdes83xx {
  * On Chip ROM
  */
 typedef struct rom83xx {
+#if defined(CONFIG_MPC8309)
+	u8 mem[0x8000];
+#else
 	u8 mem[0x10000];
+#endif
 } rom83xx_t;
 
 /*
@@ -972,6 +983,56 @@ typedef struct immap {
 	u8			res8[0xC0000];
 	u8			qe[0x100000];	/* QE block */
 } immap_t;
+#elif defined(CONFIG_MPC8309)
+typedef struct immap {
+	sysconf83xx_t		sysconf;	/* System configuration */
+	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
+	rtclk83xx_t		rtc;		/* Real Time Clock Module Registers */
+	rtclk83xx_t		pit;		/* Periodic Interval Timer */
+	gtm83xx_t		gtm[2];		/* Global Timers Module */
+	ipic83xx_t		ipic;		/* Integrated Programmable Interrupt Controller */
+	arbiter83xx_t		arbiter;	/* System Arbiter Registers */
+	reset83xx_t		reset;		/* Reset Module */
+	clk83xx_t		clk;		/* System Clock Module */
+	pmc83xx_t		pmc;		/* Power Management Control Module */
+	gpio83xx_t		gpio[2];	/* General purpose I/O module */
+	u8			res0[0x500];	/* res0 1.25 KBytes added for 8309 */
+	qepi83xx_t		qepi;		/* QE Ports Interrupts Registers */
+	qepio83xx_t		qepio;		/* QE Parallel I/O ports */
+	u8			res1[0x800];
+	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
+	fsl_i2c_t		i2c[2];		/* I2C Controllers */
+	u8			res2[0x1300];
+	duart83xx_t		duart[2];	/* DUART */
+	u8			res3[0x200];
+	duart83xx_t		duart1[2];	/* DUART */
+	u8			res4[0x500];
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
+	u8			res5[0x1000];
+	u8			spi[0x100];
+	u8			res6[0xf00];
+	dma83xx_t		dma;		/* DMA */
+	pciconf83xx_t		pci_conf[1];	/* PCI Configuration Registers */
+	u8			res7[0x80];
+	ios83xx_t		ios;		/* Sequencer (IOS) */
+	pcictrl83xx_t		pci_ctrl[1];	/* PCI Control & Status Registers */
+	u8			res8[0x13A00];
+	u8			can1[0x1000];	/* Flexcan 1 */
+	u8			can2[0x1000];	/* Flexcan 2 */
+	u8			res9[0x5000];
+	usb83xx_t		usb;
+	u8			res10[0x5000];
+	u8			can3[0x1000];	/* Flexcan 3 */
+	u8			can4[0x1000];	/* Flexcan 4 */
+	u8			res11[0x1000];
+	u8			dma1[0x2000];	/* DMA */
+	sdhc83xx_t		sdhc;		/* SDHC Controller */
+	u8			res12[0xC1000];
+	rom83xx_t		rom;		/* On Chip ROM */
+	u8			res13[0x8000];
+	u8			qe[0x100000];	/* QE block */
+	u8			res14[0xE00000];/* Added for 8309 */
+} immap_t;
 #endif
 
 #define CONFIG_SYS_MPC83xx_DDR_OFFSET	(0x2000)

arch/powerpc/include/asm/immap_qe.h

@@ -20,7 +20,7 @@
 #define QE_MURAM_SIZE		0xc000UL
 #define MAX_QE_RISC		2
 #define QE_NUM_OF_SNUM		28
-#elif defined(CONFIG_MPC832x)
+#elif defined(CONFIG_MPC832x) || defined(CONFIG_MPC8309)
 #define QE_MURAM_SIZE		0x4000UL
 #define MAX_QE_RISC		1
 #define QE_NUM_OF_SNUM		28

drivers/qe/qe.c

@@ -113,18 +113,21 @@ static void qe_sdma_init(void)
  * we just need to know what the SNUMs are for the threads.
  */
 static u8 thread_snum[] = {
+/* Evthreads 16-29 are not supported in MPC8309 */
+#if !defined(CONFIG_MPC8309)
 	0x04, 0x05, 0x0c, 0x0d,
 	0x14, 0x15, 0x1c, 0x1d,
 	0x24, 0x25, 0x2c, 0x2d,
-	0x34, 0x35, 0x88, 0x89,
-	0x98, 0x99, 0xa8, 0xa9,
-	0xb8, 0xb9, 0xc8, 0xc9,
-	0xd8, 0xd9, 0xe8, 0xe9,
-	0x08, 0x09, 0x18, 0x19,
-	0x28, 0x29, 0x38, 0x39,
-	0x48, 0x49, 0x58, 0x59,
-	0x68, 0x69, 0x78, 0x79,
-	0x80, 0x81
+	0x34, 0x35,
+#endif
+	0x88, 0x89, 0x98, 0x99,
+	0xa8, 0xa9, 0xb8, 0xb9,
+	0xc8, 0xc9, 0xd8, 0xd9,
+	0xe8, 0xe9, 0x08, 0x09,
+	0x18, 0x19, 0x28, 0x29,
+	0x38, 0x39, 0x48, 0x49,
+	0x58, 0x59, 0x68, 0x69,
+	0x78, 0x79, 0x80, 0x81
 };
 
 static void qe_snums_init(void)

include/mpc83xx.h

@@ -74,6 +74,7 @@
 #define SPR_FAMILY(spridr)		((spridr & 0xFFF00000) >> 20)
 
 #define SPR_8308			0x8100
+#define SPR_8309			0x8110
 #define SPR_831X_FAMILY			0x80B
 #define SPR_8311			0x80B2
 #define SPR_8313			0x80B0
@@ -389,6 +390,86 @@
 #define SICRH_TSOBI1_V2P5		(1 << 1)
 #define SICRH_TSOBI2_V3P3		(0 << 0)
 #define SICRH_TSOBI2_V2P5		(1 << 0)
+
+#elif defined(CONFIG_MPC8309)
+/* SICR_1 */
+#define SICR_1_UART1_UART1S		(0 << (30-2))
+#define SICR_1_UART1_UART1RTS		(1 << (30-2))
+#define SICR_1_I2C_I2C			(0 << (30-4))
+#define SICR_1_I2C_CKSTOP		(1 << (30-4))
+#define SICR_1_IRQ_A_IRQ		(0 << (30-6))
+#define SICR_1_IRQ_A_MCP		(1 << (30-6))
+#define SICR_1_IRQ_B_IRQ		(0 << (30-8))
+#define SICR_1_IRQ_B_CKSTOP		(1 << (30-8))
+#define SICR_1_GPIO_A_GPIO		(0 << (30-10))
+#define SICR_1_GPIO_A_SD		(2 << (30-10))
+#define SICR_1_GPIO_A_DDR		(3 << (30-10))
+#define SICR_1_GPIO_B_GPIO		(0 << (30-12))
+#define SICR_1_GPIO_B_SD		(2 << (30-12))
+#define SICR_1_GPIO_B_QE		(3 << (30-12))
+#define SICR_1_GPIO_C_GPIO		(0 << (30-14))
+#define SICR_1_GPIO_C_CAN		(1 << (30-14))
+#define SICR_1_GPIO_C_DDR		(2 << (30-14))
+#define SICR_1_GPIO_C_LCS		(3 << (30-14))
+#define SICR_1_GPIO_D_GPIO		(0 << (30-16))
+#define SICR_1_GPIO_D_CAN		(1 << (30-16))
+#define SICR_1_GPIO_D_DDR		(2 << (30-16))
+#define SICR_1_GPIO_D_LCS		(3 << (30-16))
+#define SICR_1_GPIO_E_GPIO		(0 << (30-18))
+#define SICR_1_GPIO_E_CAN		(1 << (30-18))
+#define SICR_1_GPIO_E_DDR		(2 << (30-18))
+#define SICR_1_GPIO_E_LCS		(3 << (30-18))
+#define SICR_1_GPIO_F_GPIO		(0 << (30-20))
+#define SICR_1_GPIO_F_CAN		(1 << (30-20))
+#define SICR_1_GPIO_F_CK		(2 << (30-20))
+#define SICR_1_USB_A_USBDR		(0 << (30-22))
+#define SICR_1_USB_A_UART2S		(1 << (30-22))
+#define SICR_1_USB_B_USBDR		(0 << (30-24))
+#define SICR_1_USB_B_UART2S		(1 << (30-24))
+#define SICR_1_USB_B_UART2RTS		(2 << (30-24))
+#define SICR_1_USB_C_USBDR		(0 << (30-26))
+#define SICR_1_USB_C_QE_EXT		(3 << (30-26))
+#define SICR_1_FEC1_FEC1		(0 << (30-28))
+#define SICR_1_FEC1_GTM			(1 << (30-28))
+#define SICR_1_FEC1_GPIO		(2 << (30-28))
+#define SICR_1_FEC2_FEC2		(0 << (30-30))
+#define SICR_1_FEC2_GTM			(1 << (30-30))
+#define SICR_1_FEC2_GPIO		(2 << (30-30))
+/* SICR_2 */
+#define SICR_2_FEC3_FEC3		(0 << (30-0))
+#define SICR_2_FEC3_TMR			(1 << (30-0))
+#define SICR_2_FEC3_GPIO		(2 << (30-0))
+#define SICR_2_HDLC1_A_HDLC1		(0 << (30-2))
+#define SICR_2_HDLC1_A_GPIO		(1 << (30-2))
+#define SICR_2_HDLC1_A_TDM1		(2 << (30-2))
+#define SICR_2_ELBC_A_LA		(0 << (30-4))
+#define SICR_2_ELBC_B_LCLK		(0 << (30-6))
+#define SICR_2_HDLC2_A_HDLC2		(0 << (30-8))
+#define SICR_2_HDLC2_A_GPIO		(0 << (30-8))
+#define SICR_2_HDLC2_A_TDM2		(0 << (30-8))
+/* bits 10-11 unused */
+#define SICR_2_USB_D_USBDR		(0 << (30-12))
+#define SICR_2_USB_D_GPIO		(2 << (30-12))
+#define SICR_2_USB_D_QE_BRG		(3 << (30-12))
+#define SICR_2_PCI_PCI			(0 << (30-14))
+#define SICR_2_PCI_CPCI_HS		(2 << (30-14))
+#define SICR_2_HDLC1_B_HDLC1		(0 << (30-16))
+#define SICR_2_HDLC1_B_GPIO		(1 << (30-16))
+#define SICR_2_HDLC1_B_QE_BRG		(2 << (30-16))
+#define SICR_2_HDLC1_B_TDM1		(3 << (30-16))
+#define SICR_2_HDLC1_C_HDLC1		(0 << (30-18))
+#define SICR_2_HDLC1_C_GPIO		(1 << (30-18))
+#define SICR_2_HDLC1_C_TDM1		(2 << (30-18))
+#define SICR_2_HDLC2_B_HDLC2		(0 << (30-20))
+#define SICR_2_HDLC2_B_GPIO		(1 << (30-20))
+#define SICR_2_HDLC2_B_QE_BRG		(2 << (30-20))
+#define SICR_2_HDLC2_B_TDM2		(3 << (30-20))
+#define SICR_2_HDLC2_C_HDLC2		(0 << (30-22))
+#define SICR_2_HDLC2_C_GPIO		(1 << (30-22))
+#define SICR_2_HDLC2_C_TDM2		(2 << (30-22))
+#define SICR_2_HDLC2_C_QE_BRG		(3 << (30-22))
+#define SICR_2_QUIESCE_B		(0 << (30-24))
+
 #endif
 
 /*
@@ -580,6 +661,63 @@
 #define HRCWL_SVCOD_DIV_8		0x10000000
 #define HRCWL_SVCOD_DIV_2		0x20000000
 #define HRCWL_SVCOD_DIV_1		0x30000000
+#elif defined(CONFIG_MPC8309)
+
+#define HRCWL_CEVCOD			0x000000C0
+#define HRCWL_CEVCOD_SHIFT		6
+/*
+ * According to Errata MPC8309RMAD, Rev. 0.2, 9/2012
+ * these are different than with 8360, 832x
+ */
+#define HRCWL_CE_PLL_VCO_DIV_2		0x00000000
+#define HRCWL_CE_PLL_VCO_DIV_4		0x00000040
+#define HRCWL_CE_PLL_VCO_DIV_8		0x00000080
+
+#define HRCWL_CEPDF			0x00000020
+#define HRCWL_CEPDF_SHIFT		5
+#define HRCWL_CE_PLL_DIV_1X1		0x00000000
+#define HRCWL_CE_PLL_DIV_2X1		0x00000020
+
+#define HRCWL_CEPMF			0x0000001F
+#define HRCWL_CEPMF_SHIFT		0
+#define HRCWL_CE_TO_PLL_1X16_		0x00000000
+#define HRCWL_CE_TO_PLL_1X2		0x00000002
+#define HRCWL_CE_TO_PLL_1X3		0x00000003
+#define HRCWL_CE_TO_PLL_1X4		0x00000004
+#define HRCWL_CE_TO_PLL_1X5		0x00000005
+#define HRCWL_CE_TO_PLL_1X6		0x00000006
+#define HRCWL_CE_TO_PLL_1X7		0x00000007
+#define HRCWL_CE_TO_PLL_1X8		0x00000008
+#define HRCWL_CE_TO_PLL_1X9		0x00000009
+#define HRCWL_CE_TO_PLL_1X10		0x0000000A
+#define HRCWL_CE_TO_PLL_1X11		0x0000000B
+#define HRCWL_CE_TO_PLL_1X12		0x0000000C
+#define HRCWL_CE_TO_PLL_1X13		0x0000000D
+#define HRCWL_CE_TO_PLL_1X14		0x0000000E
+#define HRCWL_CE_TO_PLL_1X15		0x0000000F
+#define HRCWL_CE_TO_PLL_1X16		0x00000010
+#define HRCWL_CE_TO_PLL_1X17		0x00000011
+#define HRCWL_CE_TO_PLL_1X18		0x00000012
+#define HRCWL_CE_TO_PLL_1X19		0x00000013
+#define HRCWL_CE_TO_PLL_1X20		0x00000014
+#define HRCWL_CE_TO_PLL_1X21		0x00000015
+#define HRCWL_CE_TO_PLL_1X22		0x00000016
+#define HRCWL_CE_TO_PLL_1X23		0x00000017
+#define HRCWL_CE_TO_PLL_1X24		0x00000018
+#define HRCWL_CE_TO_PLL_1X25		0x00000019
+#define HRCWL_CE_TO_PLL_1X26		0x0000001A
+#define HRCWL_CE_TO_PLL_1X27		0x0000001B
+#define HRCWL_CE_TO_PLL_1X28		0x0000001C
+#define HRCWL_CE_TO_PLL_1X29		0x0000001D
+#define HRCWL_CE_TO_PLL_1X30		0x0000001E
+#define HRCWL_CE_TO_PLL_1X31		0x0000001F
+
+#define HRCWL_SVCOD			0x30000000
+#define HRCWL_SVCOD_SHIFT		28
+#define HRCWL_SVCOD_DIV_2		0x00000000
+#define HRCWL_SVCOD_DIV_4		0x10000000
+#define HRCWL_SVCOD_DIV_8		0x20000000
+#define HRCWL_SVCOD_DIV_1		0x30000000
 #endif
 
 /*
@@ -940,6 +1078,21 @@
 #define SCCR_SATACM_1			0x00000055
 #define SCCR_SATACM_2			0x000000aa
 #define SCCR_SATACM_3			0x000000ff
+#elif defined(CONFIG_MPC8309)
+/* SCCR bits - MPC8309 specific */
+#define SCCR_SDHCCM			0x0c000000
+#define SCCR_SDHCCM_SHIFT		26
+#define SCCR_SDHCCM_0			0x00000000
+#define SCCR_SDHCCM_1			0x04000000
+#define SCCR_SDHCCM_2			0x08000000
+#define SCCR_SDHCCM_3			0x0c000000
+
+#define SCCR_USBDRCM			0x00c00000
+#define SCCR_USBDRCM_SHIFT		22
+#define SCCR_USBDRCM_0			0x00000000
+#define SCCR_USBDRCM_1			0x00400000
+#define SCCR_USBDRCM_2			0x00800000
+#define SCCR_USBDRCM_3			0x00c00000
 #endif
 
 #define SCCR_PCIEXP1CM			0x00300000