Make SC3 board build with 'make O='; use 'addcons' consistently

(SC3 and Jupiter used to use 'addcon' instead).

Signed-off-by: Wolfgang Denk wd@denx.de

board/sc3/Makefile

@@ -23,13 +23,17 @@
 
 include $(TOPDIR)/config.mk
 
-LIB	= lib$(BOARD).a
+LIB	= $(obj)lib$(BOARD).a
 
-OBJS	= $(BOARD).o sc3nand.o
+COBJS	= $(BOARD).o sc3nand.o
 SOBJS	= init.o
 
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
 $(LIB):	$(OBJS) $(SOBJS)
-	$(AR) crv $@ $^
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
 clean:
 	rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean:	clean
 
 #########################################################################
 
-.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
 
-sinclude .depend
+sinclude $(obj).depend
 
 #########################################################################

include/configs/jupiter.h

@@ -116,14 +116,14 @@
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip addcon;"				\
+	"flash_nfs=run nfsargs addip addcons;"				\
 		"bootm ${kernel_addr}\0"				\
 	"flash_self=run ramargs addip;"					\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"addcon=setenv bootargs ${bootargs} console=${contyp},"		\
+	"addcons=setenv bootargs ${bootargs} console=${contyp},"	\
 		"${baudrate}\0"						\
 	"contyp=ttyS0\0"						\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcon;"	\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;"	\
 		"bootm\0"						\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
 	"bootfile=/tftpboot/jupiter/uImage\0"				\

include/configs/sc3.h

@@ -113,10 +113,13 @@
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip;"					\
+	"addcons=setenv bootargs ${bootargs} "				\
+		"console=ttyS0,${baudrate}\0"				\
+	"flash_nfs=run nfsargs addip addcons;"				\
 		"bootm ${kernel_addr}\0"				\
-	"flash_nand=run nand_args addip addcon;bootm ${kernel_addr}\0"	\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"flash_nand=run nand_args addip addcons;bootm ${kernel_addr}\0"	\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;"	\
+		"bootm\0"						\
 	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"bootfile=/tftpboot/sc3/uImage\0"				\
 	"u-boot=/tftpboot/sc3/u-boot.bin\0"				\