powerpc/85xx: Enable eSPI support on P1022DS

Signed-off-by: Jiang Yutang <b14898@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

board/freescale/p1022ds/p1022ds.c

@@ -46,6 +46,9 @@ int board_early_init_f(void)
 	/* Set the pin muxing to enable ETSEC2. */
 	clrbits_be32(&gur->pmuxcr2, 0x001F8000);
 
+	/* Enable the SPI */
+	clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI);
+
 	return 0;
 }
 

include/configs/P1022DS.h

@@ -170,6 +170,8 @@
 #define PIXIS_LBMAP_SWITCH	7
 #define PIXIS_LBMAP_MASK	0xF0
 #define PIXIS_LBMAP_ALTBANK	0x20
+#define PIXIS_ELBC_SPI_MASK	0xc0
+#define PIXIS_SPI		0x80
 
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* Initial L1 address */
@@ -266,6 +268,19 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 #define CONFIG_SYS_EEPROM_BUS_NUM	1
 
+/*
+ * eSPI - Enhanced SPI
+ */
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+
+#define CONFIG_HARD_SPI
+#define CONFIG_FSL_ESPI
+
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED		10000000
+#define CONFIG_SF_DEFAULT_MODE		0
+
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.