Merge branch 'master' of git://git.denx.de/u-boot-ti

arch/arm/cpu/armv7/omap-common/timer.c

@@ -41,12 +41,8 @@ static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE;
 
 /*
  * Nothing really to do with interrupts, just starts up a counter.
- * We run the counter with 13MHz, divided by 8, resulting in timer
- * frequency of 1.625MHz. With 32bit counter register, counter
- * overflows in ~44min
  */
 
-/* 13MHz / 8 = 1.625MHz */
 #define TIMER_CLOCK	(V_SCLK / (2 << CONFIG_SYS_PTV))
 #define TIMER_LOAD_VAL	0xffffffff
 
@@ -84,11 +80,6 @@ void set_timer(ulong t)
 /* delay x useconds */
 void __udelay(unsigned long usec)
 {
-#if defined(CONFIG_OMAP44XX)
-	/* TODO temporary hack until OMAP4 clock setup routines are present */
-	if (usec > 1000)
-		usec = usec/1000;
-#endif
 	long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
 	unsigned long now, last = readl(&timer_base->tcrr);
 

arch/arm/cpu/armv7/omap4/board.c

@@ -88,3 +88,14 @@ int checkboard(void)
 	return 0;
 }
 
+/*
+* This function is called by start_armboot. You can reliably use static
+* data. Any boot-time function that require static data should be
+* called from here
+*/
+int arch_cpu_init(void)
+{
+	set_muxconf_regs();
+	return 0;
+}
+

arch/arm/include/asm/arch-omap3/cpu.h

@@ -483,4 +483,7 @@ struct pm {
 #define I2C_BASE2		(OMAP34XX_CORE_L4_IO_BASE + 0x72000)
 #define I2C_BASE3		(OMAP34XX_CORE_L4_IO_BASE + 0x60000)
 
+/* MUSB base */
+#define MUSB_BASE		(OMAP34XX_CORE_L4_IO_BASE + 0xAB000)
+
 #endif /* _CPU_H */

arch/arm/include/asm/arch-omap3/i2c.h

@@ -34,7 +34,9 @@ struct i2c {
 	unsigned short stat;	/* 0x08 */
 	unsigned short res3;
 	unsigned short iv;	/* 0x0C */
-	unsigned short res4[3];
+	unsigned short res4;
+	unsigned short syss;	/* 0x10 */
+	unsigned short res4a;
 	unsigned short buf;	/* 0x14 */
 	unsigned short res5;
 	unsigned short cnt;	/* 0x18 */

arch/arm/include/asm/arch-omap4/cpu.h

@@ -139,4 +139,7 @@ struct watchdog {
 #define I2C_BASE2		(OMAP44XX_L4_PER_BASE + 0x72000)
 #define I2C_BASE3		(OMAP44XX_L4_PER_BASE + 0x60000)
 
+/* MUSB base */
+#define MUSB_BASE		(OMAP44XX_L4_CORE_BASE + 0xAB000)
+
 #endif /* _CPU_H */

arch/arm/include/asm/arch-omap4/mux_omap4.h

@@ -0,0 +1,344 @@
+/*
+ * (C) Copyright 2004-2009
+ * Texas Instruments Incorporated
+ * Richard Woodruff		<r-woodruff2@ti.com>
+ * Aneesh V			<aneesh@ti.com>
+ * Balaji Krishnamoorthy	<balajitk@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _MUX_OMAP4_H_
+#define _MUX_OMAP4_H_
+
+#include <asm/types.h>
+
+struct pad_conf_entry {
+
+	u16 offset;
+
+	u16 val;
+
+} __attribute__ ((packed));
+
+#ifdef CONFIG_OFF_PADCONF
+#define OFF_PD          (1 << 12)
+#define OFF_PU          (3 << 12)
+#define OFF_OUT_PTD     (0 << 10)
+#define OFF_OUT_PTU     (2 << 10)
+#define OFF_IN          (1 << 10)
+#define OFF_OUT         (0 << 10)
+#define OFF_EN          (1 << 9)
+#else
+#define OFF_PD          (0 << 12)
+#define OFF_PU          (0 << 12)
+#define OFF_OUT_PTD     (0 << 10)
+#define OFF_OUT_PTU     (0 << 10)
+#define OFF_IN          (0 << 10)
+#define OFF_OUT         (0 << 10)
+#define OFF_EN          (0 << 9)
+#endif
+
+#define IEN             (1 << 8)
+#define IDIS            (0 << 8)
+#define PTU             (3 << 3)
+#define PTD             (1 << 3)
+#define EN              (1 << 3)
+#define DIS             (0 << 3)
+
+#define M0              0
+#define M1              1
+#define M2              2
+#define M3              3
+#define M4              4
+#define M5              5
+#define M6              6
+#define M7              7
+
+#define SAFE_MODE	M7
+
+#ifdef CONFIG_OFF_PADCONF
+#define OFF_IN_PD       (OFF_PD | OFF_IN | OFF_EN)
+#define OFF_IN_PU       (OFF_PU | OFF_IN | OFF_EN)
+#define OFF_OUT_PD      (OFF_OUT_PTD | OFF_OUT | OFF_EN)
+#define OFF_OUT_PU      (OFF_OUT_PTU | OFF_OUT | OFF_EN)
+#else
+#define OFF_IN_PD       0
+#define OFF_IN_PU       0
+#define OFF_OUT_PD      0
+#define OFF_OUT_PU      0
+#endif
+
+#define CORE_REVISION		0x0000
+#define CORE_HWINFO		0x0004
+#define CORE_SYSCONFIG		0x0010
+#define GPMC_AD0		0x0040
+#define GPMC_AD1		0x0042
+#define GPMC_AD2		0x0044
+#define GPMC_AD3		0x0046
+#define GPMC_AD4		0x0048
+#define GPMC_AD5		0x004A
+#define GPMC_AD6		0x004C
+#define GPMC_AD7		0x004E
+#define GPMC_AD8		0x0050
+#define GPMC_AD9		0x0052
+#define GPMC_AD10		0x0054
+#define GPMC_AD11		0x0056
+#define GPMC_AD12		0x0058
+#define GPMC_AD13		0x005A
+#define GPMC_AD14		0x005C
+#define GPMC_AD15		0x005E
+#define GPMC_A16		0x0060
+#define GPMC_A17		0x0062
+#define GPMC_A18		0x0064
+#define GPMC_A19		0x0066
+#define GPMC_A20		0x0068
+#define GPMC_A21		0x006A
+#define GPMC_A22		0x006C
+#define GPMC_A23		0x006E
+#define GPMC_A24		0x0070
+#define GPMC_A25		0x0072
+#define GPMC_NCS0		0x0074
+#define GPMC_NCS1		0x0076
+#define GPMC_NCS2		0x0078
+#define GPMC_NCS3		0x007A
+#define GPMC_NWP		0x007C
+#define GPMC_CLK		0x007E
+#define GPMC_NADV_ALE		0x0080
+#define GPMC_NOE		0x0082
+#define GPMC_NWE		0x0084
+#define GPMC_NBE0_CLE		0x0086
+#define GPMC_NBE1		0x0088
+#define GPMC_WAIT0		0x008A
+#define GPMC_WAIT1		0x008C
+#define C2C_DATA11		0x008E
+#define C2C_DATA12		0x0090
+#define C2C_DATA13		0x0092
+#define C2C_DATA14		0x0094
+#define C2C_DATA15		0x0096
+#define HDMI_HPD		0x0098
+#define HDMI_CEC		0x009A
+#define HDMI_DDC_SCL		0x009C
+#define HDMI_DDC_SDA		0x009E
+#define CSI21_DX0		0x00A0
+#define CSI21_DY0		0x00A2
+#define CSI21_DX1		0x00A4
+#define CSI21_DY1		0x00A6
+#define CSI21_DX2		0x00A8
+#define CSI21_DY2		0x00AA
+#define CSI21_DX3		0x00AC
+#define CSI21_DY3		0x00AE
+#define CSI21_DX4		0x00B0
+#define CSI21_DY4		0x00B2
+#define CSI22_DX0		0x00B4
+#define CSI22_DY0		0x00B6
+#define CSI22_DX1		0x00B8
+#define CSI22_DY1		0x00BA
+#define CAM_SHUTTER		0x00BC
+#define CAM_STROBE		0x00BE
+#define CAM_GLOBALRESET		0x00C0
+#define USBB1_ULPITLL_CLK	0x00C2
+#define USBB1_ULPITLL_STP	0x00C4
+#define USBB1_ULPITLL_DIR	0x00C6
+#define USBB1_ULPITLL_NXT	0x00C8
+#define USBB1_ULPITLL_DAT0	0x00CA
+#define USBB1_ULPITLL_DAT1	0x00CC
+#define USBB1_ULPITLL_DAT2	0x00CE
+#define USBB1_ULPITLL_DAT3	0x00D0
+#define USBB1_ULPITLL_DAT4	0x00D2
+#define USBB1_ULPITLL_DAT5	0x00D4
+#define USBB1_ULPITLL_DAT6	0x00D6
+#define USBB1_ULPITLL_DAT7	0x00D8
+#define USBB1_HSIC_DATA		0x00DA
+#define USBB1_HSIC_STROBE	0x00DC
+#define USBC1_ICUSB_DP		0x00DE
+#define USBC1_ICUSB_DM		0x00E0
+#define SDMMC1_CLK		0x00E2
+#define SDMMC1_CMD		0x00E4
+#define SDMMC1_DAT0		0x00E6
+#define SDMMC1_DAT1		0x00E8
+#define SDMMC1_DAT2		0x00EA
+#define SDMMC1_DAT3		0x00EC
+#define SDMMC1_DAT4		0x00EE
+#define SDMMC1_DAT5		0x00F0
+#define SDMMC1_DAT6		0x00F2
+#define SDMMC1_DAT7		0x00F4
+#define ABE_MCBSP2_CLKX		0x00F6
+#define ABE_MCBSP2_DR		0x00F8
+#define ABE_MCBSP2_DX		0x00FA
+#define ABE_MCBSP2_FSX		0x00FC
+#define ABE_MCBSP1_CLKX		0x00FE
+#define ABE_MCBSP1_DR		0x0100
+#define ABE_MCBSP1_DX		0x0102
+#define ABE_MCBSP1_FSX		0x0104
+#define ABE_PDM_UL_DATA		0x0106
+#define ABE_PDM_DL_DATA		0x0108
+#define ABE_PDM_FRAME		0x010A
+#define ABE_PDM_LB_CLK		0x010C
+#define ABE_CLKS		0x010E
+#define ABE_DMIC_CLK1		0x0110
+#define ABE_DMIC_DIN1		0x0112
+#define ABE_DMIC_DIN2		0x0114
+#define ABE_DMIC_DIN3		0x0116
+#define UART2_CTS		0x0118
+#define UART2_RTS		0x011A
+#define UART2_RX		0x011C
+#define UART2_TX		0x011E
+#define HDQ_SIO			0x0120
+#define I2C1_SCL		0x0122
+#define I2C1_SDA		0x0124
+#define I2C2_SCL		0x0126
+#define I2C2_SDA		0x0128
+#define I2C3_SCL		0x012A
+#define I2C3_SDA		0x012C
+#define I2C4_SCL		0x012E
+#define I2C4_SDA		0x0130
+#define MCSPI1_CLK		0x0132
+#define MCSPI1_SOMI		0x0134
+#define MCSPI1_SIMO		0x0136
+#define MCSPI1_CS0		0x0138
+#define MCSPI1_CS1		0x013A
+#define MCSPI1_CS2		0x013C
+#define MCSPI1_CS3		0x013E
+#define UART3_CTS_RCTX		0x0140
+#define UART3_RTS_SD		0x0142
+#define UART3_RX_IRRX		0x0144
+#define UART3_TX_IRTX		0x0146
+#define SDMMC5_CLK		0x0148
+#define SDMMC5_CMD		0x014A
+#define SDMMC5_DAT0		0x014C
+#define SDMMC5_DAT1		0x014E
+#define SDMMC5_DAT2		0x0150
+#define SDMMC5_DAT3		0x0152
+#define MCSPI4_CLK		0x0154
+#define MCSPI4_SIMO		0x0156
+#define MCSPI4_SOMI		0x0158
+#define MCSPI4_CS0		0x015A
+#define UART4_RX		0x015C
+#define UART4_TX		0x015E
+#define USBB2_ULPITLL_CLK	0x0160
+#define USBB2_ULPITLL_STP	0x0162
+#define USBB2_ULPITLL_DIR	0x0164
+#define USBB2_ULPITLL_NXT	0x0166
+#define USBB2_ULPITLL_DAT0	0x0168
+#define USBB2_ULPITLL_DAT1	0x016A
+#define USBB2_ULPITLL_DAT2	0x016C
+#define USBB2_ULPITLL_DAT3	0x016E
+#define USBB2_ULPITLL_DAT4	0x0170
+#define USBB2_ULPITLL_DAT5	0x0172
+#define USBB2_ULPITLL_DAT6	0x0174
+#define USBB2_ULPITLL_DAT7	0x0176
+#define USBB2_HSIC_DATA		0x0178
+#define USBB2_HSIC_STROBE	0x017A
+#define UNIPRO_TX0		0x017C
+#define UNIPRO_TY0		0x017E
+#define UNIPRO_TX1		0x0180
+#define UNIPRO_TY1		0x0182
+#define UNIPRO_TX2		0x0184
+#define UNIPRO_TY2		0x0186
+#define UNIPRO_RX0		0x0188
+#define UNIPRO_RY0		0x018A
+#define UNIPRO_RX1		0x018C
+#define UNIPRO_RY1		0x018E
+#define UNIPRO_RX2		0x0190
+#define UNIPRO_RY2		0x0192
+#define USBA0_OTG_CE		0x0194
+#define USBA0_OTG_DP		0x0196
+#define USBA0_OTG_DM		0x0198
+#define FREF_CLK1_OUT		0x019A
+#define FREF_CLK2_OUT		0x019C
+#define SYS_NIRQ1		0x019E
+#define SYS_NIRQ2		0x01A0
+#define SYS_BOOT0		0x01A2
+#define SYS_BOOT1		0x01A4
+#define SYS_BOOT2		0x01A6
+#define SYS_BOOT3		0x01A8
+#define SYS_BOOT4		0x01AA
+#define SYS_BOOT5		0x01AC
+#define DPM_EMU0		0x01AE
+#define DPM_EMU1		0x01B0
+#define DPM_EMU2		0x01B2
+#define DPM_EMU3		0x01B4
+#define DPM_EMU4		0x01B6
+#define DPM_EMU5		0x01B8
+#define DPM_EMU6		0x01BA
+#define DPM_EMU7		0x01BC
+#define DPM_EMU8		0x01BE
+#define DPM_EMU9		0x01C0
+#define DPM_EMU10		0x01C2
+#define DPM_EMU11		0x01C4
+#define DPM_EMU12		0x01C6
+#define DPM_EMU13		0x01C8
+#define DPM_EMU14		0x01CA
+#define DPM_EMU15		0x01CC
+#define DPM_EMU16		0x01CE
+#define DPM_EMU17		0x01D0
+#define DPM_EMU18		0x01D2
+#define DPM_EMU19		0x01D4
+#define WAKEUPEVENT_0		0x01D8
+#define WAKEUPEVENT_1		0x01DC
+#define WAKEUPEVENT_2		0x01E0
+#define WAKEUPEVENT_3		0x01E4
+#define WAKEUPEVENT_4		0x01E8
+#define WAKEUPEVENT_5		0x01EC
+#define WAKEUPEVENT_6		0x01F0
+
+#define WKUP_REVISION		0x0000
+#define WKUP_HWINFO		0x0004
+#define WKUP_SYSCONFIG		0x0010
+#define PAD0_SIM_IO		0x0040
+#define PAD1_SIM_CLK		0x0042
+#define PAD0_SIM_RESET		0x0044
+#define PAD1_SIM_CD		0x0046
+#define PAD0_SIM_PWRCTRL		0x0048
+#define PAD1_SR_SCL		0x004A
+#define PAD0_SR_SDA		0x004C
+#define PAD1_FREF_XTAL_IN		0x004E
+#define PAD0_FREF_SLICER_IN	0x0050
+#define PAD1_FREF_CLK_IOREQ	0x0052
+#define PAD0_FREF_CLK0_OUT		0x0054
+#define PAD1_FREF_CLK3_REQ		0x0056
+#define PAD0_FREF_CLK3_OUT		0x0058
+#define PAD1_FREF_CLK4_REQ		0x005A
+#define PAD0_FREF_CLK4_OUT		0x005C
+#define PAD1_SYS_32K		0x005E
+#define PAD0_SYS_NRESPWRON		0x0060
+#define PAD1_SYS_NRESWARM		0x0062
+#define PAD0_SYS_PWR_REQ		0x0064
+#define PAD1_SYS_PWRON_RESET	0x0066
+#define PAD0_SYS_BOOT6		0x0068
+#define PAD1_SYS_BOOT7		0x006A
+#define PAD0_JTAG_NTRST		0x006C
+#define PAD1_JTAG_TCK		0x006D
+#define PAD0_JTAG_RTCK		0x0070
+#define PAD1_JTAG_TMS_TMSC		0x0072
+#define PAD0_JTAG_TDI		0x0074
+#define PAD1_JTAG_TDO		0x0076
+#define PADCONF_WAKEUPEVENT_0	0x007C
+#define CONTROL_SMART1NOPMIO_PADCONF_0		0x05A0
+#define CONTROL_SMART1NOPMIO_PADCONF_1		0x05A4
+#define PADCONF_MODE		0x05A8
+#define CONTROL_XTAL_OSCILLATOR			0x05AC
+#define CONTROL_CONTROL_I2C_2			0x0604
+#define CONTROL_CONTROL_JTAG			0x0608
+#define CONTROL_CONTROL_SYS			0x060C
+#define CONTROL_SPARE_RW		0x0614
+#define CONTROL_SPARE_R		0x0618
+#define CONTROL_SPARE_R_C0		0x061C
+
+#endif /* _MUX_OMAP4_H_ */

arch/arm/include/asm/arch-omap4/omap4.h

@@ -44,6 +44,8 @@
 
 /* CONTROL */
 #define CTRL_BASE		(OMAP44XX_L4_CORE_BASE + 0x2000)
+#define CONTROL_PADCONF_CORE	(OMAP44XX_L4_CORE_BASE + 0x100000)
+#define CONTROL_PADCONF_WKUP	(OMAP44XX_L4_CORE_BASE + 0x31E000)
 
 /* UART */
 #define UART1_BASE		(OMAP44XX_L4_PER_BASE + 0x6a000)

arch/arm/include/asm/arch-omap4/sys_proto.h

@@ -32,6 +32,7 @@ void gpmc_init(void);
 void watchdog_init(void);
 u32 get_device_type(void);
 void invalidate_dcache(u32);
+void set_muxconf_regs(void);
 
 extern const struct omap_sysinfo sysinfo;
 

board/ti/panda/panda.c

@@ -24,6 +24,8 @@
 #include <common.h>
 #include <asm/arch/sys_proto.h>
 
+#include "panda.h"
+
 DECLARE_GLOBAL_DATA_PTR;
 
 const struct omap_sysinfo sysinfo = {
@@ -61,3 +63,27 @@ int misc_init_r(void)
 {
 	return 0;
 }
+
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+{
+	int i;
+	struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
+
+	for (i = 0; i < size; i++, pad++)
+		writew(pad->val, base + pad->offset);
+}
+
+/**
+ * @brief set_muxconf_regs Setting up the configuration Mux registers
+ * specific to the board.
+ */
+void set_muxconf_regs(void)
+{
+	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array,
+		   sizeof(core_padconf_array) /
+		   sizeof(struct pad_conf_entry));
+
+	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array,
+		   sizeof(wkup_padconf_array) /
+		   sizeof(struct pad_conf_entry));
+}

board/ti/panda/panda.h

@@ -0,0 +1,265 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ *	Balaji Krishnamoorthy	<balajitk@ti.com>
+ *	Aneesh V		<aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PANDA_H_
+#define _PANDA_H_
+
+#include <asm/io.h>
+#include <asm/arch/mux_omap4.h>
+
+const struct pad_conf_entry core_padconf_array[] = {
+	{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat0 */
+	{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, 	/* sdmmc2_dat1 */
+	{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat2 */
+	{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat3 */
+	{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat4 */
+	{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat5 */
+	{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat6 */
+	{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat7 */
+	{GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* gpio_32 */
+	{GPMC_AD9, (PTU | IEN | M3)},					/* gpio_33 */
+	{GPMC_AD10, (PTU | IEN | M3)},					/* gpio_34 */
+	{GPMC_AD11, (PTU | IEN | M3)},					/* gpio_35 */
+	{GPMC_AD12, (PTU | IEN | M3)},					/* gpio_36 */
+	{GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_37 */
+	{GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_38 */
+	{GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_39 */
+	{GPMC_A16, (M3)},						/* gpio_40 */
+	{GPMC_A17, (PTD | M3)},						/* gpio_41 */
+	{GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row6 */
+	{GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row7 */
+	{GPMC_A20, (IEN | M3)},						/* gpio_44 */
+	{GPMC_A21, (M3)},						/* gpio_45 */
+	{GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col6 */
+	{GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col7 */
+	{GPMC_A24, (PTD | M3)},						/* gpio_48 */
+	{GPMC_A25, (PTD | M3)},						/* gpio_49 */
+	{GPMC_NCS0, (M3)},						/* gpio_50 */
+	{GPMC_NCS1, (IEN | M3)},					/* gpio_51 */
+	{GPMC_NCS2, (IEN | M3)},					/* gpio_52 */
+	{GPMC_NCS3, (IEN | M3)},					/* gpio_53 */
+	{GPMC_NWP, (M3)},						/* gpio_54 */
+	{GPMC_CLK, (PTD | M3)},						/* gpio_55 */
+	{GPMC_NADV_ALE, (M3)},						/* gpio_56 */
+	{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)},		/* sdmmc2_clk */
+	{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_cmd */
+	{GPMC_NBE0_CLE, (M3)},						/* gpio_59 */
+	{GPMC_NBE1, (PTD | M3)},					/* gpio_60 */
+	{GPMC_WAIT0, (PTU | IEN | M3)},					/* gpio_61 */
+	{GPMC_WAIT1, (IEN | M3)},					/* gpio_62 */
+	{C2C_DATA11, (PTD | M3)},					/* gpio_100 */
+	{C2C_DATA12, (M1)},						/* dsi1_te0 */
+	{C2C_DATA13, (PTD | M3)},					/* gpio_102 */
+	{C2C_DATA14, (M1)},						/* dsi2_te0 */
+	{C2C_DATA15, (PTD | M3)},					/* gpio_104 */
+	{HDMI_HPD, (M0)},						/* hdmi_hpd */
+	{HDMI_CEC, (M0)},						/* hdmi_cec */
+	{HDMI_DDC_SCL, (PTU | M0)},					/* hdmi_ddc_scl */
+	{HDMI_DDC_SDA, (PTU | IEN | M0)},				/* hdmi_ddc_sda */
+	{CSI21_DX0, (IEN | M0)},					/* csi21_dx0 */
+	{CSI21_DY0, (IEN | M0)},					/* csi21_dy0 */
+	{CSI21_DX1, (IEN | M0)},					/* csi21_dx1 */
+	{CSI21_DY1, (IEN | M0)},					/* csi21_dy1 */
+	{CSI21_DX2, (IEN | M0)},					/* csi21_dx2 */
+	{CSI21_DY2, (IEN | M0)},					/* csi21_dy2 */
+	{CSI21_DX3, (PTD | M7)},					/* csi21_dx3 */
+	{CSI21_DY3, (PTD | M7)},					/* csi21_dy3 */
+	{CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)},		/* csi21_dx4 */
+	{CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)},		/* csi21_dy4 */
+	{CSI22_DX0, (IEN | M0)},					/* csi22_dx0 */
+	{CSI22_DY0, (IEN | M0)},					/* csi22_dy0 */
+	{CSI22_DX1, (IEN | M0)},					/* csi22_dx1 */
+	{CSI22_DY1, (IEN | M0)},					/* csi22_dy1 */
+	{CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_shutter */
+	{CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_strobe */
+	{CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_83 */
+	{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
+	{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)},		/* usbb1_ulpiphy_stp */
+	{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dir */
+	{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_nxt */
+	{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat0 */
+	{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat1 */
+	{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat2 */
+	{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat3 */
+	{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat4 */
+	{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat5 */
+	{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat6 */
+	{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat7 */
+	{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_data */
+	{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_strobe */
+	{USBC1_ICUSB_DP, (IEN | M0)},					/* usbc1_icusb_dp */
+	{USBC1_ICUSB_DM, (IEN | M0)},					/* usbc1_icusb_dm */
+	{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)},		/* sdmmc1_clk */
+	{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_cmd */
+	{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat0 */
+	{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat1 */
+	{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat2 */
+	{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat3 */
+	{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat4 */
+	{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat5 */
+	{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat6 */
+	{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat7 */
+	{ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp2_clkx */
+	{ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)},		/* abe_mcbsp2_dr */
+	{ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)},			/* abe_mcbsp2_dx */
+	{ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp2_fsx */
+	{ABE_MCBSP1_CLKX, (IEN | M1)},					/* abe_slimbus1_clock */
+	{ABE_MCBSP1_DR, (IEN | M1)},					/* abe_slimbus1_data */
+	{ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)},			/* abe_mcbsp1_dx */
+	{ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp1_fsx */
+	{ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_ul_data */
+	{ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_dl_data */
+	{ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_frame */
+	{ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_lb_clk */
+	{ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_clks */
+	{ABE_DMIC_CLK1, (M0)},						/* abe_dmic_clk1 */
+	{ABE_DMIC_DIN1, (IEN | M0)},					/* abe_dmic_din1 */
+	{ABE_DMIC_DIN2, (IEN | M0)},					/* abe_dmic_din2 */
+	{ABE_DMIC_DIN3, (IEN | M0)},					/* abe_dmic_din3 */
+	{UART2_CTS, (PTU | IEN | M0)},					/* uart2_cts */
+	{UART2_RTS, (M0)},						/* uart2_rts */
+	{UART2_RX, (PTU | IEN | M0)},					/* uart2_rx */
+	{UART2_TX, (M0)},						/* uart2_tx */
+	{HDQ_SIO, (M3)},						/* gpio_127 */
+	{I2C1_SCL, (PTU | IEN | M0)},					/* i2c1_scl */
+	{I2C1_SDA, (PTU | IEN | M0)},					/* i2c1_sda */
+	{I2C2_SCL, (PTU | IEN | M0)},					/* i2c2_scl */
+	{I2C2_SDA, (PTU | IEN | M0)},					/* i2c2_sda */
+	{I2C3_SCL, (PTU | IEN | M0)},					/* i2c3_scl */
+	{I2C3_SDA, (PTU | IEN | M0)},					/* i2c3_sda */
+	{I2C4_SCL, (PTU | IEN | M0)},					/* i2c4_scl */
+	{I2C4_SDA, (PTU | IEN | M0)},					/* i2c4_sda */
+	{MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi1_clk */
+	{MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi1_somi */
+	{MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi1_simo */
+	{MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* mcspi1_cs0 */
+	{MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* mcspi1_cs1 */
+	{MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_139 */
+	{MCSPI1_CS3, (PTU | IEN | M3)},					/* gpio_140 */
+	{UART3_CTS_RCTX, (PTU | IEN | M0)},				/* uart3_tx */
+	{UART3_RTS_SD, (M0)},						/* uart3_rts_sd */
+	{UART3_RX_IRRX, (IEN | M0)},					/* uart3_rx */
+	{UART3_TX_IRTX, (M0)},						/* uart3_tx */
+	{SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)},		/* sdmmc5_clk */
+	{SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_cmd */
+	{SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat0 */
+	{SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat1 */
+	{SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat2 */
+	{SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat3 */
+	{MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi4_clk */
+	{MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi4_simo */
+	{MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi4_somi */
+	{MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* mcspi4_cs0 */
+	{UART4_RX, (IEN | M0)},						/* uart4_rx */
+	{UART4_TX, (M0)},						/* uart4_tx */
+	{USBB2_ULPITLL_CLK, (IEN | M3)},				/* gpio_157 */
+	{USBB2_ULPITLL_STP, (IEN | M5)},				/* dispc2_data23 */
+	{USBB2_ULPITLL_DIR, (IEN | M5)},				/* dispc2_data22 */
+	{USBB2_ULPITLL_NXT, (IEN | M5)},				/* dispc2_data21 */
+	{USBB2_ULPITLL_DAT0, (IEN | M5)},				/* dispc2_data20 */
+	{USBB2_ULPITLL_DAT1, (IEN | M5)},				/* dispc2_data19 */
+	{USBB2_ULPITLL_DAT2, (IEN | M5)},				/* dispc2_data18 */
+	{USBB2_ULPITLL_DAT3, (IEN | M5)},				/* dispc2_data15 */
+	{USBB2_ULPITLL_DAT4, (IEN | M5)},				/* dispc2_data14 */
+	{USBB2_ULPITLL_DAT5, (IEN | M5)},				/* dispc2_data13 */
+	{USBB2_ULPITLL_DAT6, (IEN | M5)},				/* dispc2_data12 */
+	{USBB2_ULPITLL_DAT7, (IEN | M5)},				/* dispc2_data11 */
+	{USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_169 */
+	{USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_170 */
+	{UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col0 */
+	{UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col1 */
+	{UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col2 */
+	{UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col3 */
+	{UNIPRO_TX2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* gpio_0 */
+	{UNIPRO_TY2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* gpio_1 */
+	{UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row0 */
+	{UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row1 */
+	{UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row2 */
+	{UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row3 */
+	{UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row4 */
+	{UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row5 */
+	{USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},	/* usba0_otg_ce */
+	{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dp */
+	{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dm */
+	{FREF_CLK1_OUT, (M0)},						/* fref_clk1_out */
+	{FREF_CLK2_OUT, (M0)},						/* fref_clk2_out */
+	{SYS_NIRQ1, (PTU | IEN | M0)},					/* sys_nirq1 */
+	{SYS_NIRQ2, (PTU | IEN | M0)},					/* sys_nirq2 */
+	{SYS_BOOT0, (PTU | IEN | M3)},					/* gpio_184 */
+	{SYS_BOOT1, (M3)},						/* gpio_185 */
+	{SYS_BOOT2, (PTD | IEN | M3)},					/* gpio_186 */
+	{SYS_BOOT3, (M3)},						/* gpio_187 */
+	{SYS_BOOT4, (M3)},						/* gpio_188 */
+	{SYS_BOOT5, (PTD | IEN | M3)},					/* gpio_189 */
+	{DPM_EMU0, (IEN | M0)},						/* dpm_emu0 */
+	{DPM_EMU1, (IEN | M0)},						/* dpm_emu1 */
+	{DPM_EMU2, (IEN | M0)},						/* dpm_emu2 */
+	{DPM_EMU3, (IEN | M5)},						/* dispc2_data10 */
+	{DPM_EMU4, (IEN | M5)},						/* dispc2_data9 */
+	{DPM_EMU5, (IEN | M5)},						/* dispc2_data16 */
+	{DPM_EMU6, (IEN | M5)},						/* dispc2_data17 */
+	{DPM_EMU7, (IEN | M5)},						/* dispc2_hsync */
+	{DPM_EMU8, (IEN | M5)},						/* dispc2_pclk */
+	{DPM_EMU9, (IEN | M5)},						/* dispc2_vsync */
+	{DPM_EMU10, (IEN | M5)},					/* dispc2_de */
+	{DPM_EMU11, (IEN | M5)},					/* dispc2_data8 */
+	{DPM_EMU12, (IEN | M5)},					/* dispc2_data7 */
+	{DPM_EMU13, (IEN | M5)},					/* dispc2_data6 */
+	{DPM_EMU14, (IEN | M5)},					/* dispc2_data5 */
+	{DPM_EMU15, (IEN | M5)},					/* dispc2_data4 */
+	{DPM_EMU16, (IEN | M5)},					/* dispc2_data3 */
+	{DPM_EMU17, (IEN | M5)},					/* dispc2_data2 */
+	{DPM_EMU18, (IEN | M5)},					/* dispc2_data1 */
+	{DPM_EMU19, (IEN | M5)},					/* dispc2_data0 */
+};
+
+const struct pad_conf_entry wkup_padconf_array[] = {
+	{PAD0_SIM_IO, (IEN | M0)},		/* sim_io */
+	{PAD1_SIM_CLK, (M0)},			/* sim_clk */
+	{PAD0_SIM_RESET, (M0)},			/* sim_reset */
+	{PAD1_SIM_CD, (PTU | IEN | M0)},	/* sim_cd */
+	{PAD0_SIM_PWRCTRL, (M0)},		/* sim_pwrctrl */
+	{PAD1_SR_SCL, (PTU | IEN | M0)},	/* sr_scl */
+	{PAD0_SR_SDA, (PTU | IEN | M0)},	/* sr_sda */
+	{PAD1_FREF_XTAL_IN, (M0)},		/* # */
+	{PAD0_FREF_SLICER_IN, (M0)},		/* fref_slicer_in */
+	{PAD1_FREF_CLK_IOREQ, (M0)},		/* fref_clk_ioreq */
+	{PAD0_FREF_CLK0_OUT, (M2)},		/* sys_drm_msecure */
+	{PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)},	/* # */
+	{PAD0_FREF_CLK3_OUT, (M0)},		/* fref_clk3_out */
+	{PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)},	/* # */
+	{PAD0_FREF_CLK4_OUT, (M0)},		/* # */
+	{PAD1_SYS_32K, (IEN | M0)},		/* sys_32k */
+	{PAD0_SYS_NRESPWRON, (M0)},		/* sys_nrespwron */
+	{PAD1_SYS_NRESWARM, (M0)},		/* sys_nreswarm */
+	{PAD0_SYS_PWR_REQ, (PTU | M0)},		/* sys_pwr_req */
+	{PAD1_SYS_PWRON_RESET, (M3)},		/* gpio_wk29 */
+	{PAD0_SYS_BOOT6, (IEN | M3)},		/* gpio_wk9 */
+	{PAD1_SYS_BOOT7, (IEN | M3)},		/* gpio_wk10 */
+};
+
+#endif
+

board/ti/sdp4430/sdp.c

@@ -25,6 +25,8 @@
 #include <common.h>
 #include <asm/arch/sys_proto.h>
 
+#include "sdp.h"
+
 DECLARE_GLOBAL_DATA_PTR;
 
 const struct omap_sysinfo sysinfo = {
@@ -62,3 +64,27 @@ int misc_init_r(void)
 {
 	return 0;
 }
+
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+{
+	int i;
+	struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
+
+	for (i = 0; i < size; i++, pad++)
+		writew(pad->val, base + pad->offset);
+}
+
+/**
+ * @brief set_muxconf_regs Setting up the configuration Mux registers
+ * specific to the board.
+ */
+void set_muxconf_regs(void)
+{
+	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array,
+		   sizeof(core_padconf_array) /
+		   sizeof(struct pad_conf_entry));
+
+	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array,
+		   sizeof(wkup_padconf_array) /
+		   sizeof(struct pad_conf_entry));
+}

board/ti/sdp4430/sdp.h

@@ -0,0 +1,265 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ *	Balaji Krishnamoorthy	<balajitk@ti.com>
+ *	Aneesh V		<aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SDP_H_
+#define _SDP_H_
+
+#include <asm/io.h>
+#include <asm/arch/mux_omap4.h>
+
+const struct pad_conf_entry core_padconf_array[] = {
+	{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat0 */
+	{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, 	/* sdmmc2_dat1 */
+	{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat2 */
+	{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat3 */
+	{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat4 */
+	{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat5 */
+	{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat6 */
+	{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_dat7 */
+	{GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* gpio_32 */
+	{GPMC_AD9, (PTU | IEN | M3)},					/* gpio_33 */
+	{GPMC_AD10, (PTU | IEN | M3)},					/* gpio_34 */
+	{GPMC_AD11, (PTU | IEN | M3)},					/* gpio_35 */
+	{GPMC_AD12, (PTU | IEN | M3)},					/* gpio_36 */
+	{GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_37 */
+	{GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_38 */
+	{GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_39 */
+	{GPMC_A16, (M3)},						/* gpio_40 */
+	{GPMC_A17, (PTD | M3)},						/* gpio_41 */
+	{GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row6 */
+	{GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row7 */
+	{GPMC_A20, (IEN | M3)},						/* gpio_44 */
+	{GPMC_A21, (M3)},						/* gpio_45 */
+	{GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col6 */
+	{GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col7 */
+	{GPMC_A24, (PTD | M3)},						/* gpio_48 */
+	{GPMC_A25, (PTD | M3)},						/* gpio_49 */
+	{GPMC_NCS0, (M3)},						/* gpio_50 */
+	{GPMC_NCS1, (IEN | M3)},					/* gpio_51 */
+	{GPMC_NCS2, (IEN | M3)},					/* gpio_52 */
+	{GPMC_NCS3, (IEN | M3)},					/* gpio_53 */
+	{GPMC_NWP, (M3)},						/* gpio_54 */
+	{GPMC_CLK, (PTD | M3)},						/* gpio_55 */
+	{GPMC_NADV_ALE, (M3)},						/* gpio_56 */
+	{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)},		/* sdmmc2_clk */
+	{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* sdmmc2_cmd */
+	{GPMC_NBE0_CLE, (M3)},						/* gpio_59 */
+	{GPMC_NBE1, (PTD | M3)},					/* gpio_60 */
+	{GPMC_WAIT0, (PTU | IEN | M3)},					/* gpio_61 */
+	{GPMC_WAIT1, (IEN | M3)},					/* gpio_62 */
+	{C2C_DATA11, (PTD | M3)},					/* gpio_100 */
+	{C2C_DATA12, (M1)},						/* dsi1_te0 */
+	{C2C_DATA13, (PTD | M3)},					/* gpio_102 */
+	{C2C_DATA14, (M1)},						/* dsi2_te0 */
+	{C2C_DATA15, (PTD | M3)},					/* gpio_104 */
+	{HDMI_HPD, (M0)},						/* hdmi_hpd */
+	{HDMI_CEC, (M0)},						/* hdmi_cec */
+	{HDMI_DDC_SCL, (PTU | M0)},					/* hdmi_ddc_scl */
+	{HDMI_DDC_SDA, (PTU | IEN | M0)},				/* hdmi_ddc_sda */
+	{CSI21_DX0, (IEN | M0)},					/* csi21_dx0 */
+	{CSI21_DY0, (IEN | M0)},					/* csi21_dy0 */
+	{CSI21_DX1, (IEN | M0)},					/* csi21_dx1 */
+	{CSI21_DY1, (IEN | M0)},					/* csi21_dy1 */
+	{CSI21_DX2, (IEN | M0)},					/* csi21_dx2 */
+	{CSI21_DY2, (IEN | M0)},					/* csi21_dy2 */
+	{CSI21_DX3, (PTD | M7)},					/* csi21_dx3 */
+	{CSI21_DY3, (PTD | M7)},					/* csi21_dy3 */
+	{CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)},		/* csi21_dx4 */
+	{CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)},		/* csi21_dy4 */
+	{CSI22_DX0, (IEN | M0)},					/* csi22_dx0 */
+	{CSI22_DY0, (IEN | M0)},					/* csi22_dy0 */
+	{CSI22_DX1, (IEN | M0)},					/* csi22_dx1 */
+	{CSI22_DY1, (IEN | M0)},					/* csi22_dy1 */
+	{CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_shutter */
+	{CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_strobe */
+	{CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_83 */
+	{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
+	{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)},		/* usbb1_ulpiphy_stp */
+	{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dir */
+	{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_nxt */
+	{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat0 */
+	{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat1 */
+	{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat2 */
+	{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat3 */
+	{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat4 */
+	{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat5 */
+	{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat6 */
+	{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat7 */
+	{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_data */
+	{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_strobe */
+	{USBC1_ICUSB_DP, (IEN | M0)},					/* usbc1_icusb_dp */
+	{USBC1_ICUSB_DM, (IEN | M0)},					/* usbc1_icusb_dm */
+	{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)},		/* sdmmc1_clk */
+	{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_cmd */
+	{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat0 */
+	{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat1 */
+	{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat2 */
+	{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat3 */
+	{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat4 */
+	{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat5 */
+	{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat6 */
+	{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc1_dat7 */
+	{ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp2_clkx */
+	{ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)},		/* abe_mcbsp2_dr */
+	{ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)},			/* abe_mcbsp2_dx */
+	{ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp2_fsx */
+	{ABE_MCBSP1_CLKX, (IEN | M1)},					/* abe_slimbus1_clock */
+	{ABE_MCBSP1_DR, (IEN | M1)},					/* abe_slimbus1_data */
+	{ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)},			/* abe_mcbsp1_dx */
+	{ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp1_fsx */
+	{ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_ul_data */
+	{ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_dl_data */
+	{ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_frame */
+	{ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_lb_clk */
+	{ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_clks */
+	{ABE_DMIC_CLK1, (M0)},						/* abe_dmic_clk1 */
+	{ABE_DMIC_DIN1, (IEN | M0)},					/* abe_dmic_din1 */
+	{ABE_DMIC_DIN2, (IEN | M0)},					/* abe_dmic_din2 */
+	{ABE_DMIC_DIN3, (IEN | M0)},					/* abe_dmic_din3 */
+	{UART2_CTS, (PTU | IEN | M0)},					/* uart2_cts */
+	{UART2_RTS, (M0)},						/* uart2_rts */
+	{UART2_RX, (PTU | IEN | M0)},					/* uart2_rx */
+	{UART2_TX, (M0)},						/* uart2_tx */
+	{HDQ_SIO, (M3)},						/* gpio_127 */
+	{I2C1_SCL, (PTU | IEN | M0)},					/* i2c1_scl */
+	{I2C1_SDA, (PTU | IEN | M0)},					/* i2c1_sda */
+	{I2C2_SCL, (PTU | IEN | M0)},					/* i2c2_scl */
+	{I2C2_SDA, (PTU | IEN | M0)},					/* i2c2_sda */
+	{I2C3_SCL, (PTU | IEN | M0)},					/* i2c3_scl */
+	{I2C3_SDA, (PTU | IEN | M0)},					/* i2c3_sda */
+	{I2C4_SCL, (PTU | IEN | M0)},					/* i2c4_scl */
+	{I2C4_SDA, (PTU | IEN | M0)},					/* i2c4_sda */
+	{MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi1_clk */
+	{MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi1_somi */
+	{MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi1_simo */
+	{MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* mcspi1_cs0 */
+	{MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* mcspi1_cs1 */
+	{MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_139 */
+	{MCSPI1_CS3, (PTU | IEN | M3)},					/* gpio_140 */
+	{UART3_CTS_RCTX, (PTU | IEN | M0)},				/* uart3_tx */
+	{UART3_RTS_SD, (M0)},						/* uart3_rts_sd */
+	{UART3_RX_IRRX, (IEN | M0)},					/* uart3_rx */
+	{UART3_TX_IRTX, (M0)},						/* uart3_tx */
+	{SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)},		/* sdmmc5_clk */
+	{SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_cmd */
+	{SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat0 */
+	{SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat1 */
+	{SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat2 */
+	{SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat3 */
+	{MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi4_clk */
+	{MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi4_simo */
+	{MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi4_somi */
+	{MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* mcspi4_cs0 */
+	{UART4_RX, (IEN | M0)},						/* uart4_rx */
+	{UART4_TX, (M0)},						/* uart4_tx */
+	{USBB2_ULPITLL_CLK, (IEN | M3)},				/* gpio_157 */
+	{USBB2_ULPITLL_STP, (IEN | M5)},				/* dispc2_data23 */
+	{USBB2_ULPITLL_DIR, (IEN | M5)},				/* dispc2_data22 */
+	{USBB2_ULPITLL_NXT, (IEN | M5)},				/* dispc2_data21 */
+	{USBB2_ULPITLL_DAT0, (IEN | M5)},				/* dispc2_data20 */
+	{USBB2_ULPITLL_DAT1, (IEN | M5)},				/* dispc2_data19 */
+	{USBB2_ULPITLL_DAT2, (IEN | M5)},				/* dispc2_data18 */
+	{USBB2_ULPITLL_DAT3, (IEN | M5)},				/* dispc2_data15 */
+	{USBB2_ULPITLL_DAT4, (IEN | M5)},				/* dispc2_data14 */
+	{USBB2_ULPITLL_DAT5, (IEN | M5)},				/* dispc2_data13 */
+	{USBB2_ULPITLL_DAT6, (IEN | M5)},				/* dispc2_data12 */
+	{USBB2_ULPITLL_DAT7, (IEN | M5)},				/* dispc2_data11 */
+	{USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_169 */
+	{USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_170 */
+	{UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col0 */
+	{UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col1 */
+	{UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col2 */
+	{UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col3 */
+	{UNIPRO_TX2, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col4 */
+	{UNIPRO_TY2, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col5 */
+	{UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row0 */
+	{UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row1 */
+	{UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row2 */
+	{UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row3 */
+	{UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row4 */
+	{UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row5 */
+	{USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},	/* usba0_otg_ce */
+	{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dp */
+	{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dm */
+	{FREF_CLK1_OUT, (M0)},						/* fref_clk1_out */
+	{FREF_CLK2_OUT, (M0)},						/* fref_clk2_out */
+	{SYS_NIRQ1, (PTU | IEN | M0)},					/* sys_nirq1 */
+	{SYS_NIRQ2, (PTU | IEN | M0)},					/* sys_nirq2 */
+	{SYS_BOOT0, (PTU | IEN | M3)},					/* gpio_184 */
+	{SYS_BOOT1, (M3)},						/* gpio_185 */
+	{SYS_BOOT2, (PTD | IEN | M3)},					/* gpio_186 */
+	{SYS_BOOT3, (M3)},						/* gpio_187 */
+	{SYS_BOOT4, (M3)},						/* gpio_188 */
+	{SYS_BOOT5, (PTD | IEN | M3)},					/* gpio_189 */
+	{DPM_EMU0, (IEN | M0)},						/* dpm_emu0 */
+	{DPM_EMU1, (IEN | M0)},						/* dpm_emu1 */
+	{DPM_EMU2, (IEN | M0)},						/* dpm_emu2 */
+	{DPM_EMU3, (IEN | M5)},						/* dispc2_data10 */
+	{DPM_EMU4, (IEN | M5)},						/* dispc2_data9 */
+	{DPM_EMU5, (IEN | M5)},						/* dispc2_data16 */
+	{DPM_EMU6, (IEN | M5)},						/* dispc2_data17 */
+	{DPM_EMU7, (IEN | M5)},						/* dispc2_hsync */
+	{DPM_EMU8, (IEN | M5)},						/* dispc2_pclk */
+	{DPM_EMU9, (IEN | M5)},						/* dispc2_vsync */
+	{DPM_EMU10, (IEN | M5)},					/* dispc2_de */
+	{DPM_EMU11, (IEN | M5)},					/* dispc2_data8 */
+	{DPM_EMU12, (IEN | M5)},					/* dispc2_data7 */
+	{DPM_EMU13, (IEN | M5)},					/* dispc2_data6 */
+	{DPM_EMU14, (IEN | M5)},					/* dispc2_data5 */
+	{DPM_EMU15, (IEN | M5)},					/* dispc2_data4 */
+	{DPM_EMU16, (M3)},						/* gpio_27 */
+	{DPM_EMU17, (IEN | M5)},					/* dispc2_data2 */
+	{DPM_EMU18, (IEN | M5)},					/* dispc2_data1 */
+	{DPM_EMU19, (IEN | M5)},					/* dispc2_data0 */
+};
+
+const struct pad_conf_entry wkup_padconf_array[] = {
+	{PAD0_SIM_IO, (IEN | M0)},		/* sim_io */
+	{PAD1_SIM_CLK, (M0)},			/* sim_clk */
+	{PAD0_SIM_RESET, (M0)},			/* sim_reset */
+	{PAD1_SIM_CD, (PTU | IEN | M0)},	/* sim_cd */
+	{PAD0_SIM_PWRCTRL, (M0)},		/* sim_pwrctrl */
+	{PAD1_SR_SCL, (PTU | IEN | M0)},	/* sr_scl */
+	{PAD0_SR_SDA, (PTU | IEN | M0)},	/* sr_sda */
+	{PAD1_FREF_XTAL_IN, (M0)},		/* # */
+	{PAD0_FREF_SLICER_IN, (M0)},		/* fref_slicer_in */
+	{PAD1_FREF_CLK_IOREQ, (M0)},		/* fref_clk_ioreq */
+	{PAD0_FREF_CLK0_OUT, (M2)},		/* sys_drm_msecure */
+	{PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)},	/* # */
+	{PAD0_FREF_CLK3_OUT, (M0)},		/* fref_clk3_out */
+	{PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)},	/* # */
+	{PAD0_FREF_CLK4_OUT, (M0)},		/* # */
+	{PAD1_SYS_32K, (IEN | M0)},		/* sys_32k */
+	{PAD0_SYS_NRESPWRON, (M0)},		/* sys_nrespwron */
+	{PAD1_SYS_NRESWARM, (M0)},		/* sys_nreswarm */
+	{PAD0_SYS_PWR_REQ, (PTU | M0)},		/* sys_pwr_req */
+	{PAD1_SYS_PWRON_RESET, (M3)},		/* gpio_wk29 */
+	{PAD0_SYS_BOOT6, (IEN | M3)},		/* gpio_wk9 */
+	{PAD1_SYS_BOOT7, (IEN | M3)},		/* gpio_wk10 */
+};
+
+#endif
+

drivers/i2c/omap24xx_i2c.c

@@ -27,6 +27,8 @@
 
 #include "omap24xx_i2c.h"
 
+#define I2C_TIMEOUT	10
+
 static void wait_for_bb (void);
 static u16 wait_for_pin (void);
 static void flush_fifo(void);
@@ -41,6 +43,7 @@ void i2c_init (int speed, int slaveadd)
 	int psc, fsscll, fssclh;
 	int hsscll = 0, hssclh = 0;
 	u32 scll, sclh;
+	int timeout = I2C_TIMEOUT;
 
 	/* Only handle standard, fast and high speeds */
 	if ((speed != OMAP_I2C_STANDARD) &&
@@ -102,15 +105,24 @@ void i2c_init (int speed, int slaveadd)
 		sclh = (unsigned int)fssclh;
 	}
 
-	writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */
-	udelay(1000);
-	writew(0x0, &i2c_base->sysc); /* will probably self clear but */
-
 	if (readw (&i2c_base->con) & I2C_CON_EN) {
 		writew (0, &i2c_base->con);
 		udelay (50000);
 	}
 
+	writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */
+	udelay(1000);
+
+	writew(I2C_CON_EN, &i2c_base->con);
+	while (!(readw(&i2c_base->syss) & I2C_SYSS_RDONE) && timeout--) {
+		if (timeout <= 0) {
+			printf("ERROR: Timeout in soft-reset\n");
+			return;
+		}
+		udelay(1000);
+	}
+
+	writew(0, &i2c_base->con);
 	writew(psc, &i2c_base->psc);
 	writew(scll, &i2c_base->scll);
 	writew(sclh, &i2c_base->sclh);
@@ -159,15 +171,14 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
 	}
 
 	if (!i2c_error) {
-		/* free bus, otherwise we can't use a combined transction */
-		writew (0, &i2c_base->con);
-		while (readw (&i2c_base->stat) || (readw (&i2c_base->con) & I2C_CON_MST)) {
+		writew (I2C_CON_EN, &i2c_base->con);
+		while (readw(&i2c_base->stat) &
+			(I2C_STAT_XRDY | I2C_STAT_ARDY)) {
 			udelay (10000);
 			/* Have to clear pending interrupt to clear I2C_STAT */
 			writew (0xFFFF, &i2c_base->stat);
 		}
 
-		wait_for_bb ();
 		/* set slave address */
 		writew (devaddr, &i2c_base->sa);
 		/* read one byte from slave */
@@ -191,8 +202,8 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
 
 		if (!i2c_error) {
 			writew (I2C_CON_EN, &i2c_base->con);
-			while (readw (&i2c_base->stat)
-			       || (readw (&i2c_base->con) & I2C_CON_MST)) {
+			while (readw (&i2c_base->stat) &
+				(I2C_STAT_RRDY | I2C_STAT_ARDY)) {
 				udelay (10000);
 				writew (0xFFFF, &i2c_base->stat);
 			}

drivers/i2c/omap24xx_i2c.h

@@ -85,6 +85,10 @@
 #define I2C_SYSTEST_SDA_I	(1 << 1)  /* SDA line sense input value */
 #define I2C_SYSTEST_SDA_O	(1 << 0)  /* SDA line drive output value */
 
+/* I2C System Status Register (I2C_SYSS): */
+
+#define I2C_SYSS_RDONE          (1 << 0)  /* Internel reset monitoring */
+
 #define I2C_SCLL_SCLL		0
 #define I2C_SCLL_SCLL_M		0xFF
 #define I2C_SCLL_HSSCLL		8

drivers/power/Makefile

@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
 LIB 	:= $(obj)libpower.a
 
 COBJS-$(CONFIG_TWL4030_POWER)	+= twl4030.o
+COBJS-$(CONFIG_TWL6030_POWER)	+= twl6030.o
 
 COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)

drivers/power/twl6030.c

@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#ifdef CONFIG_TWL6030_POWER
+
+#include <twl6030.h>
+
+/* Functions to read and write from TWL6030 */
+static inline int twl6030_i2c_write_u8(u8 chip_no, u8 val, u8 reg)
+{
+	return i2c_write(chip_no, reg, 1, &val, 1);
+}
+
+static inline int twl6030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
+{
+	return i2c_read(chip_no, reg, 1, val, 1);
+}
+
+void twl6030_start_usb_charging(void)
+{
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VICHRG_1500,
+							CHARGERUSB_VICHRG);
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CIN_LIMIT_NONE,
+							CHARGERUSB_CINLIMIT);
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MBAT_TEMP,
+							CONTROLLER_INT_MASK);
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MASK_MCHARGERUSB_THMREG,
+							CHARGERUSB_INT_MASK);
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VOREG_4P0,
+							CHARGERUSB_VOREG);
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL2_VITERM_100,
+							CHARGERUSB_CTRL2);
+	/* Enable USB charging */
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1_EN_CHARGER,
+							CONTROLLER_CTRL1);
+	return;
+}
+
+void twl6030_init_battery_charging(void)
+{
+	twl6030_start_usb_charging();
+	return;
+}
+
+void twl6030_usb_device_settings()
+{
+	u8 data = 0;
+
+	/* Select APP Group and set state to ON */
+	twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VUSB_CFG_STATE);
+
+	twl6030_i2c_read_u8(TWL6030_CHIP_PM, &data, MISC2);
+	data |= 0x10;
+
+	/* Select the input supply for VBUS regulator */
+	twl6030_i2c_write_u8(TWL6030_CHIP_PM, data, MISC2);
+}
+#endif

drivers/usb/musb/omap3.c

@@ -31,6 +31,7 @@
  */
 
 #include <twl4030.h>
+#include <twl6030.h>
 #include "omap3.h"
 
 static int platform_needs_initialization = 1;
@@ -65,7 +66,12 @@ static struct omap3_otg_regs *otg;
 
 #define OMAP3_OTG_SYSSTATUS_RESETDONE			0x0001
 
+/* OMAP4430 has an internal PHY, use it */
+#ifdef CONFIG_OMAP4430
+#define OMAP3_OTG_INTERFSEL_OMAP			0x0000
+#else
 #define OMAP3_OTG_INTERFSEL_OMAP			0x0001
+#endif
 
 #define OMAP3_OTG_FORCESTDBY_STANDBY			0x0001
 
@@ -105,6 +111,11 @@ int musb_platform_init(void)
 			goto end;
 		}
 #endif
+
+#ifdef CONFIG_TWL6030_POWER
+		twl6030_usb_device_settings();
+#endif
+
 		otg = (struct omap3_otg_regs *)OMAP3_OTG_BASE;
 
 		/* Set OTG to always be on */
@@ -122,6 +133,11 @@ int musb_platform_init(void)
 #ifdef CONFIG_OMAP3_EVM
 		musb_cfg.extvbus = omap3_evm_need_extvbus();
 #endif
+
+#ifdef CONFIG_OMAP4430
+		u32 *usbotghs_control = (u32 *)(CTRL_BASE + 0x33C);
+		*usbotghs_control = 0x15;
+#endif
 		platform_needs_initialization = 0;
 	}
 

drivers/usb/musb/omap3.h

@@ -31,10 +31,11 @@
 #ifndef _MUSB_OMAP3_H_
 #define _MUSB_OMAP3_H_
 
+#include <asm/arch/cpu.h>
 #include "musb_core.h"
 
 /* Base address of MUSB registers */
-#define MENTOR_USB0_BASE (OMAP34XX_CORE_L4_IO_BASE + 0xAB000)
+#define MENTOR_USB0_BASE MUSB_BASE
 
 /* Base address of OTG registers */
 #define OMAP3_OTG_BASE (MENTOR_USB0_BASE + 0x400)

include/configs/omap4_panda.h

@@ -35,6 +35,7 @@
 #define CONFIG_OMAP44XX		1	/* which is a 44XX */
 #define CONFIG_OMAP4430		1	/* which is in a 4430 */
 #define CONFIG_PANDA		1	/* working with Panda */
+#define CONFIG_ARCH_CPU_INIT
 
 /* Get CPU defs */
 #include <asm/arch/cpu.h>
@@ -102,12 +103,29 @@
 #define CONFIG_DRIVER_OMAP34XX_I2C	1
 #define CONFIG_I2C_MULTI_BUS		1
 
+/* TWL6030 */
+#define CONFIG_TWL6030_POWER		1
+
 /* MMC */
 #define CONFIG_MMC			1
 #define CONFIG_OMAP3_MMC		1
 #define CONFIG_SYS_MMC_SET_DEV		1
 #define CONFIG_DOS_PARTITION		1
 
+/* USB */
+#define CONFIG_MUSB_UDC			1
+#define CONFIG_USB_OMAP3		1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE		1
+#define CONFIG_USB_TTY			1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID		0x0451
+#define CONFIG_USBD_PRODUCTID		0x5678
+#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME	"OMAP4 Panda"
+
 /* Flash */
 #define CONFIG_SYS_NO_FLASH	1
 
@@ -135,16 +153,21 @@
  * Environment setup
  */
 
+#define CONFIG_BOOTDELAY	3
+
 /* allow overwriting serial config and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
 	"console=ttyS2,115200n8\0" \
+	"usbtty=cdc_acm\0" \
+	"vram=16M\0" \
 	"mmcdev=1\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
 	"mmcrootfstype=ext3 rootwait\0" \
 	"mmcargs=setenv bootargs console=${console} " \
+		"vram=${vram} " \
 		"root=${mmcroot} " \
 		"rootfstype=${mmcrootfstype}\0" \
 	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
@@ -162,7 +185,6 @@
 		"else " \
 			"if run loaduimage; then " \
 				"run mmcboot; " \
-			"else run nandboot; " \
 			"fi; " \
 		"fi; " \
 	"fi"
@@ -195,7 +217,7 @@
 #define CONFIG_SYS_LOAD_ADDR		0x80000000
 
 /* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE		GPT1_BASE
+#define CONFIG_SYS_TIMERBASE		GPT2_BASE
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ			1000
 

include/configs/omap4_sdp4430.h

@@ -36,6 +36,7 @@
 #define CONFIG_OMAP44XX		1	/* which is a 44XX */
 #define CONFIG_OMAP4430		1	/* which is in a 4430 */
 #define CONFIG_4430SDP		1	/* working with SDP */
+#define CONFIG_ARCH_CPU_INIT
 
 /* Get CPU defs */
 #include <asm/arch/cpu.h>
@@ -103,12 +104,29 @@
 #define CONFIG_DRIVER_OMAP34XX_I2C	1
 #define CONFIG_I2C_MULTI_BUS		1
 
+/* TWL6030 */
+#define CONFIG_TWL6030_POWER		1
+
 /* MMC */
 #define CONFIG_MMC			1
 #define CONFIG_OMAP3_MMC		1
 #define CONFIG_SYS_MMC_SET_DEV		1
 #define CONFIG_DOS_PARTITION		1
 
+/* USB */
+#define CONFIG_MUSB_UDC			1
+#define CONFIG_USB_OMAP3		1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE		1
+#define CONFIG_USB_TTY			1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID		0x0451
+#define CONFIG_USBD_PRODUCTID		0x5678
+#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME	"SDP4430"
+
 /* Flash */
 #define CONFIG_SYS_NO_FLASH	1
 
@@ -136,16 +154,21 @@
  * Environment setup
  */
 
+#define CONFIG_BOOTDELAY	3
+
 /* allow overwriting serial config and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
 	"console=ttyS2,115200n8\0" \
+	"usbtty=cdc_acm\0" \
+	"vram=16M\0" \
 	"mmcdev=1\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
 	"mmcrootfstype=ext3 rootwait\0" \
 	"mmcargs=setenv bootargs console=${console} " \
+		"vram=${vram} " \
 		"root=${mmcroot} " \
 		"rootfstype=${mmcrootfstype}\0" \
 	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
@@ -163,7 +186,6 @@
 		"else " \
 			"if run loaduimage; then " \
 				"run mmcboot; " \
-			"else run nandboot; " \
 			"fi; " \
 		"fi; " \
 	"fi"
@@ -196,7 +218,7 @@
 #define CONFIG_SYS_LOAD_ADDR		0x80000000
 
 /* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE		GPT1_BASE
+#define CONFIG_SYS_TIMERBASE		GPT2_BASE
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ			1000
 

include/twl6030.h

@@ -0,0 +1,91 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+/* I2C chip addresses */
+#define TWL6030_CHIP_PM		0x48
+
+#define TWL6030_CHIP_USB	0x49
+#define TWL6030_CHIP_ADC	0x49
+#define TWL6030_CHIP_CHARGER	0x49
+#define TWL6030_CHIP_PWM	0x49
+
+/* Battery CHARGER REGISTERS */
+#define CONTROLLER_INT_MASK	0xE0
+#define CONTROLLER_CTRL1	0xE1
+#define CONTROLLER_WDG		0xE2
+#define CONTROLLER_STAT1	0xE3
+#define CHARGERUSB_INT_STATUS	0xE4
+#define CHARGERUSB_INT_MASK	0xE5
+#define CHARGERUSB_STATUS_INT1	0xE6
+#define CHARGERUSB_STATUS_INT2	0xE7
+#define CHARGERUSB_CTRL1	0xE8
+#define CHARGERUSB_CTRL2	0xE9
+#define CHARGERUSB_CTRL3	0xEA
+#define CHARGERUSB_STAT1	0xEB
+#define CHARGERUSB_VOREG	0xEC
+#define CHARGERUSB_VICHRG	0xED
+#define CHARGERUSB_CINLIMIT	0xEE
+#define CHARGERUSB_CTRLLIMIT1	0xEF
+
+/* CHARGERUSB_VICHRG */
+#define CHARGERUSB_VICHRG_500		0x4
+#define CHARGERUSB_VICHRG_1500		0xE
+/* CHARGERUSB_CINLIMIT */
+#define CHARGERUSB_CIN_LIMIT_100	0x1
+#define CHARGERUSB_CIN_LIMIT_300	0x5
+#define CHARGERUSB_CIN_LIMIT_500	0x9
+#define CHARGERUSB_CIN_LIMIT_NONE	0xF
+/* CONTROLLER_INT_MASK */
+#define MVAC_FAULT		(1 << 6)
+#define MAC_EOC			(1 << 5)
+#define MBAT_REMOVED		(1 << 4)
+#define MFAULT_WDG		(1 << 3)
+#define MBAT_TEMP		(1 << 2)
+#define MVBUS_DET		(1 << 1)
+#define MVAC_DET		(1 << 0)
+/* CHARGERUSB_INT_MASK */
+#define MASK_MCURRENT_TERM		(1 << 3)
+#define MASK_MCHARGERUSB_STAT		(1 << 2)
+#define MASK_MCHARGERUSB_THMREG		(1 << 1)
+#define MASK_MCHARGERUSB_FAULT		(1 << 0)
+/* CHARGERUSB_VOREG */
+#define CHARGERUSB_VOREG_3P52		0x01
+#define CHARGERUSB_VOREG_4P0		0x19
+#define CHARGERUSB_VOREG_4P2		0x23
+#define CHARGERUSB_VOREG_4P76		0x3F
+/* CHARGERUSB_CTRL2 */
+#define CHARGERUSB_CTRL2_VITERM_50	(0 << 5)
+#define CHARGERUSB_CTRL2_VITERM_100	(1 << 5)
+#define CHARGERUSB_CTRL2_VITERM_150	(2 << 5)
+/* CONTROLLER_CTRL1 */
+#define CONTROLLER_CTRL1_EN_CHARGER	(1 << 4)
+#define CONTROLLER_CTRL1_SEL_CHARGER	(1 << 3)
+
+#define VUSB_CFG_STATE		0xA2
+#define MISC2			0xE5
+
+void twl6030_init_battery_charging(void);
+void twl6030_usb_device_settings(void);